diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index 032f5b80b..6185e1518 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -2745,6 +2745,12 @@ msgstr ""
 msgid "AMS Slots"
 msgstr ""
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -6858,24 +6864,21 @@ msgstr ""
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
+msgid "Send print job"
 msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr ""
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -6907,9 +6910,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr ""
 
-msgid "Click here if you can't connect to the printer"
-msgstr ""
-
 msgid "send completed"
 msgstr ""
 
@@ -7071,8 +7071,16 @@ msgstr ""
 
 #, possible-c-format, possible-boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, possible-c-format, possible-boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7361,8 +7369,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 
 msgid ""
@@ -8019,9 +8027,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -12461,8 +12475,8 @@ msgid ""
 msgstr ""
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 
diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po
index 774839a1d..42eb6891c 100644
--- a/bbl/i18n/cs/BambuStudio_cs.po
+++ b/bbl/i18n/cs/BambuStudio_cs.po
@@ -2,12 +2,12 @@
 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
 # This file is distributed under the same license as the PACKAGE package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-# 
+#
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: 2023-10-18 10:45+0800\n"
 "Last-Translator: René Mošner <renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -2823,6 +2823,12 @@ msgstr "Krok"
 msgid "AMS Slots"
 msgstr "AMS sloty"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7081,24 +7087,21 @@ msgstr ""
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Odeslat tiskovou úlohu na"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr ""
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7130,9 +7133,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr ""
 
-msgid "Click here if you can't connect to the printer"
-msgstr ""
-
 msgid "send completed"
 msgstr "odeslat dokončeno"
 
@@ -7315,8 +7315,16 @@ msgstr "Délka názvu překračuje limit."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7624,8 +7632,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat  "
 "\"Timelapse Wipe Tower\" \n"
@@ -8325,9 +8333,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13177,8 +13191,8 @@ msgid ""
 msgstr ""
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 
@@ -14233,8 +14247,8 @@ msgid ""
 msgstr ""
 "Plochou na podložku\n"
 "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z "
-"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na "
-"podložku\" nebo stiskněte klávesu <b>F</b>."
+"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku"
+"\" nebo stiskněte klávesu <b>F</b>."
 
 #: resources/data/hints.ini: [hint:Object List]
 msgid ""
@@ -14453,6 +14467,9 @@ msgid ""
 "probability of warping."
 msgstr ""
 
+#~ msgid "Send print job to"
+#~ msgstr "Odeslat tiskovou úlohu na"
+
 #~ msgid "Print with filaments in ams"
 #~ msgstr "Tisk s filamenty v ams"
 
@@ -14734,12 +14751,12 @@ msgstr ""
 #~ "Najdete podrobnosti o kalibraci průtoku dynamiky v naší wiki.\n"
 #~ "\n"
 #~ "Obvykle kalibrace není potřebná. Při spuštění tisku s jednobarevným/"
-#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku "
-#~ "dynamiky\" v menu spuštění tisku, tiskárna bude postupovat podle staré "
-#~ "metody a zkalibruje filament před tiskem. Při spuštění tisku s "
-#~ "vícebarevným/materiálovým filamentem bude tiskárna při každé změně "
-#~ "filamentu používat výchozí kompenzační parametr pro filament, což má "
-#~ "většinou dobrý výsledek.\n"
+#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku dynamiky"
+#~ "\" v menu spuštění tisku, tiskárna bude postupovat podle staré metody a "
+#~ "zkalibruje filament před tiskem. Při spuštění tisku s vícebarevným/"
+#~ "materiálovým filamentem bude tiskárna při každé změně filamentu používat "
+#~ "výchozí kompenzační parametr pro filament, což má většinou dobrý "
+#~ "výsledek.\n"
 #~ "\n"
 #~ "Všimněte si, že existují některé případy, které mohou způsobit, že "
 #~ "výsledek kalibrace nebude spolehlivý: použití texturované podložky pro "
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index 1bb5f1599..400f364bd 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2885,6 +2885,12 @@ msgstr "Schritt"
 msgid "AMS Slots"
 msgstr "AMS-Slots"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7322,24 +7328,22 @@ msgstr "Bambu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Druckauftrag senden an"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr ""
+"Klicken Sie hier, wenn Sie keine Verbindung zum Drucker herstellen können"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7371,10 +7375,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr ""
-"Klicken Sie hier, wenn Sie keine Verbindung zum Drucker herstellen können"
-
 msgid "send completed"
 msgstr "Senden abgeschlossen"
 
@@ -7575,8 +7575,16 @@ msgstr "Die Namenslänge überschreitet das Limit."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7922,13 +7930,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
 "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
-"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
-">\"Timelapse Wischturm\" wählen."
+"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
+"\"Timelapse Wischturm\" wählen."
 
 msgid ""
 "The notes are too large, and may not be synchronized to the cloud. Please "
@@ -8646,9 +8654,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13830,12 +13844,12 @@ msgstr ""
 "Möchten Sie es umschreiben?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -15300,6 +15314,9 @@ msgstr ""
 "wie z. B. ABS, die Wahrscheinlichkeit von Verformungen durch eine "
 "entsprechende Erhöhung der Heizbetttemperatur verringert werden kann?"
 
+#~ msgid "Send print job to"
+#~ msgstr "Druckauftrag senden an"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
@@ -16183,8 +16200,8 @@ msgstr ""
 #~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to "
 #~ "automatically load or unload filiament."
 #~ msgstr ""
-#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder "
-#~ "\"Entladen\", um automatisch Filament zu laden oder zu entladen."
+#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder \"Entladen"
+#~ "\", um automatisch Filament zu laden oder zu entladen."
 
 #~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
 #~ msgstr "Wählen Sie eine oder mehrere Dateien aus (3mf/step/stl/obj/amf):"
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index cbe3a7bfe..0107e4fb3 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2830,6 +2830,12 @@ msgstr "Step"
 msgid "AMS Slots"
 msgstr "AMS Slots"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7186,24 +7192,21 @@ msgstr "Bambu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Send print job to"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Click here if you can't connect to the printer"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7235,9 +7238,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Click here if you can't connect to the printer"
-
 msgid "send completed"
 msgstr "send completed"
 
@@ -7429,8 +7429,16 @@ msgstr "The name length exceeds the limit."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7760,13 +7768,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 
 msgid ""
 "The notes are too large, and may not be synchronized to the cloud. Please "
@@ -8467,9 +8475,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13479,12 +13493,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -14927,6 +14941,9 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid "Send print job to"
+#~ msgstr "Send print job to"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index 582102cc1..2ea280de0 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2881,6 +2881,12 @@ msgstr "Paso"
 msgid "AMS Slots"
 msgstr "Ranuras AMS"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7303,24 +7309,21 @@ msgstr "Placa PEI texturizada Bambu"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Enviar el trabajo de impresión a"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Haga clic aquí si no puede conectarse a la impresora"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7352,9 +7355,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Haga clic aquí si no puede conectarse a la impresora"
-
 msgid "send completed"
 msgstr "envío completo"
 
@@ -7551,8 +7551,16 @@ msgstr "La longitud del nombre supera el límite."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7894,8 +7902,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir "
 "una «Torre de purga para el timelapse» \n"
@@ -8612,9 +8620,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13789,12 +13803,12 @@ msgstr ""
 "¿Quieres reescribirlo?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -15258,6 +15272,9 @@ msgstr ""
 "aumentar adecuadamente la temperatura del lecho térmico puede reducir la "
 "probabilidad de alabeo?"
 
+#~ msgid "Send print job to"
+#~ msgstr "Enviar el trabajo de impresión a"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
@@ -17830,9 +17847,9 @@ msgstr ""
 #~ "Gracias por comprar un dispositivo Bambu Lab. Antes de usar tu "
 #~ "dispositivo Bambu Lab, lee los términos y condiciones. Al hacer clic para "
 #~ "aceptar el uso de tu dispositivo Bambu Lab, aceptas cumplir con la "
-#~ "Política de privacidad y los Términos de uso (en conjunto, los "
-#~ "\"Términos\"). Si no cumple o no está de acuerdo con la Política de "
-#~ "privacidad de Bambu Lab, no utilice los equipos y servicios de Bambu Lab."
+#~ "Política de privacidad y los Términos de uso (en conjunto, los \"Términos"
+#~ "\"). Si no cumple o no está de acuerdo con la Política de privacidad de "
+#~ "Bambu Lab, no utilice los equipos y servicios de Bambu Lab."
 
 #~ msgid "The %s filament is too soft to be used with the AMS"
 #~ msgstr "El filamento %s es demasiado blando para usarlo con el AMS"
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index 26befc680..fc3adfc0a 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2874,6 +2874,12 @@ msgstr "Étape"
 msgid "AMS Slots"
 msgstr "Emplacements AMS"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7310,24 +7316,21 @@ msgstr "Bambu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Envoyer le travail d'impression à"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Cliquez ici si vous ne parvenez pas à vous connecter à l'imprimante"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7359,9 +7362,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Cliquez ici si vous ne parvenez pas à vous connecter à l'imprimante"
-
 msgid "send completed"
 msgstr "Envoi terminé"
 
@@ -7566,8 +7566,16 @@ msgstr "La longueur du nom dépasse la limite."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7918,8 +7926,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé "
 "d’ajouter une \"Tour de nettoyage timelapse\".\n"
@@ -8065,9 +8073,9 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Cool Plate"
 msgstr ""
-"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool "
-"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
-"être imprimé sur le plateau froid."
+"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate"
+"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être "
+"imprimé sur le plateau froid."
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
@@ -8641,9 +8649,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -10234,8 +10248,8 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 "Ajoutez du remplissage solide à proximité des surfaces inclinées pour "
-"garantir l'épaisseur verticale de la coque (couches solides "
-"supérieure+inférieure)."
+"garantir l'épaisseur verticale de la coque (couches solides supérieure"
+"+inférieure)."
 
 msgid "Internal bridge support thickness"
 msgstr "Épaisseur du support interne du pont"
@@ -13840,12 +13854,12 @@ msgstr ""
 "Voulez-vous le réécrire ?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -15317,6 +15331,9 @@ msgstr ""
 "que l'ABS, une augmentation appropriée de la température du plateau peut "
 "réduire le risque de déformation ?"
 
+#~ msgid "Send print job to"
+#~ msgstr "Envoyer le travail d'impression à"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index fc358234a..950db5e56 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2869,6 +2869,12 @@ msgstr "Lépés"
 msgid "AMS Slots"
 msgstr "AMS férőhelyek"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7247,24 +7253,21 @@ msgstr "Bambu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Nyomtatási feladat küldése"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Kattints ide, ha nem tudsz csatlakozni a nyomtatóhoz"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7296,9 +7299,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Kattints ide, ha nem tudsz csatlakozni a nyomtatóhoz"
-
 msgid "send completed"
 msgstr "küldés befejezve"
 
@@ -7497,8 +7497,16 @@ msgstr "A név túl hosszú."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7837,8 +7845,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy "
 "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb "
@@ -8552,9 +8560,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13667,12 +13681,12 @@ msgstr ""
 "Szeretnéd felülírni?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -15116,6 +15130,9 @@ msgstr ""
 "Tudtad, hogy a vetemedésre hajlamos anyagok (például ABS) nyomtatásakor a "
 "tárgyasztal hőmérsékletének növelése csökkentheti a vetemedés valószínűségét?"
 
+#~ msgid "Send print job to"
+#~ msgstr "Nyomtatási feladat küldése"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po
index 2b354c8d9..dcaafb6d7 100644
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2868,6 +2868,12 @@ msgstr "Step"
 msgid "AMS Slots"
 msgstr "Slot AMS"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7260,24 +7266,21 @@ msgstr "Bambu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Invia stampa a"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Clicca qui se non riesci a connetterti alla stampante"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7309,9 +7312,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Clicca qui se non riesci a connetterti alla stampante"
-
 msgid "send completed"
 msgstr "invio completato"
 
@@ -7508,8 +7508,16 @@ msgstr "La lunghezza del nome supera il limite."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7849,8 +7857,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 "aggiungere un \"Timelapse Torre di pulizia\"\n"
@@ -8567,9 +8575,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -9088,8 +9102,8 @@ msgid ""
 msgstr ""
 "È stato rilevato un aggiornamento importante che deve essere eseguito prima "
 "che la stampa possa continuare. Vuoi effettuare l'aggiornamento adesso? Puoi "
-"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna "
-"firmware\"."
+"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware"
+"\"."
 
 msgid ""
 "The firmware version is abnormal. Repairing and updating are required before "
@@ -13725,8 +13739,8 @@ msgstr ""
 "Vuoi riscriverlo?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Rinomineremo i preset come \"Vendor Type Serial @printer selezionato\". \n"
@@ -15182,6 +15196,9 @@ msgstr ""
 "aumentare adeguatamente la temperatura del piano può ridurre la probabilità "
 "di deformazione."
 
+#~ msgid "Send print job to"
+#~ msgstr "Invia stampa a"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
@@ -15654,13 +15671,12 @@ msgstr ""
 #~ "wiki.\n"
 #~ "\n"
 #~ "Di solito la calibrazione non è necessaria. Quando si avvia una stampa a "
-#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del "
-#~ "flusso\" selezionata nel menu di avvio della stampa, la stampante "
-#~ "eseguirà la vecchia procedura, calibrando il filamento prima della "
-#~ "stampa; Quando si avvia una stampa multicolore/materiale, la stampante "
-#~ "utilizzerà il parametro di compensazione predefinito del filamento "
-#~ "durante ogni cambio, che nella maggior parte dei casi avrà un buon "
-#~ "risultato.\n"
+#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del flusso"
+#~ "\" selezionata nel menu di avvio della stampa, la stampante eseguirà la "
+#~ "vecchia procedura, calibrando il filamento prima della stampa; Quando si "
+#~ "avvia una stampa multicolore/materiale, la stampante utilizzerà il "
+#~ "parametro di compensazione predefinito del filamento durante ogni cambio, "
+#~ "che nella maggior parte dei casi avrà un buon risultato.\n"
 #~ "\n"
 #~ "Tieni presente che ci sono alcuni casi che renderanno il risultato della "
 #~ "calibrazione non affidabile: utilizzo di un piatto texture; il piatto non "
@@ -18185,8 +18201,8 @@ msgstr ""
 #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 #~ "aggiungere un \"Timelapse Torre di pulizia\"\n"
 #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del "
-#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di "
-#~ "pulizia\"».\n"
+#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia"
+#~ "\"».\n"
 
 #~ msgid ""
 #~ "When sparse infill density is low, the internal solid infill or internal "
diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po
index 74a23c6b0..3d116e2ef 100644
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2811,6 +2811,12 @@ msgstr "手順"
 msgid "AMS Slots"
 msgstr "AMSスロット"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7113,24 +7119,21 @@ msgstr "Bambu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "造形タスクを送信"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Click here if you can't connect to the printer"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7162,9 +7165,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Click here if you can't connect to the printer"
-
 msgid "send completed"
 msgstr "送信完了"
 
@@ -7336,8 +7336,16 @@ msgstr "名称の長さが制限を超えています。"
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7670,8 +7678,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」"
 "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム"
@@ -8361,9 +8369,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13272,12 +13286,12 @@ msgstr ""
 "リライトしますか？"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -14693,6 +14707,9 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid "Send print job to"
+#~ msgstr "造形タスクを送信"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "変更を保存"
 
diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po
index 42f0847a8..7dc01227b 100644
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2820,6 +2820,12 @@ msgstr "단계"
 msgid "AMS Slots"
 msgstr "AMS 슬롯"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7136,24 +7142,21 @@ msgstr "뱀부 질감 PEI 플레이트"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "출력 작업 보내기"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "프린터에 연결할 수 없는 경우 여기를 클릭하세요."
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7185,9 +7188,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "AMS 사용"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "프린터에 연결할 수 없는 경우 여기를 클릭하세요."
-
 msgid "send completed"
 msgstr "보내기 완료"
 
@@ -7370,8 +7370,16 @@ msgstr "이름 길이가 제한을 초과합니다."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7694,8 +7702,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋"
 "습니다. \n"
@@ -8392,9 +8400,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13341,12 +13355,12 @@ msgstr ""
 "다시 작성하시겠습니까?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -14782,6 +14796,9 @@ msgstr ""
 "ABS 등 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이"
 "면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid "Send print job to"
+#~ msgstr "출력 작업 보내기"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "수정된 값 저장"
 
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index a78672b5a..3b83aa8e4 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2883,6 +2883,12 @@ msgstr "Stap"
 msgid "AMS Slots"
 msgstr "AMS Slots"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7303,24 +7309,21 @@ msgstr "Bambu getextureerde PEI-plaat"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Stuur de printtaak naar"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Klik hier als je geen verbinding kunt maken met de printer"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7352,9 +7355,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Klik hier als je geen verbinding kunt maken met de printer"
-
 msgid "send completed"
 msgstr "versturen gelukt"
 
@@ -7551,8 +7551,16 @@ msgstr "De lengte van de naam overschrijdt de limiet."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7720,10 +7728,9 @@ msgstr ""
 "Bedankt voor uw aankoop van een Bambu Lab-apparaat. Lees de algemene "
 "voorwaarden voordat u uw Bambu Lab apparaat gebruikt. Door te klikken om "
 "akkoord te gaan met het gebruik van uw Bambu Lab apparaat, gaat u akkoord "
-"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de "
-"\"Voorwaarden\"). Als u niet voldoet aan of akkoord gaat met het "
-"Privacybeleid van Bambu Lab, maak dan geen gebruik van Bambu Lab apparatuur "
-"en diensten."
+"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de \"Voorwaarden"
+"\"). Als u niet voldoet aan of akkoord gaat met het Privacybeleid van Bambu "
+"Lab, maak dan geen gebruik van Bambu Lab apparatuur en diensten."
 
 msgid "and"
 msgstr "en"
@@ -7893,8 +7900,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
 "„Timelapse Wipe Tower” toe te voegen \n"
@@ -8614,9 +8621,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13750,12 +13763,12 @@ msgstr ""
 "Wil je het herschrijven?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -15205,6 +15218,9 @@ msgstr ""
 "kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het "
 "warmtebed de kans op kromtrekken kan verkleinen?"
 
+#~ msgid "Send print job to"
+#~ msgstr "Stuur de printtaak naar"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po
index 8db8b72c6..cb7d0c4d0 100644
--- a/bbl/i18n/pl/BambuStudio_pl.po
+++ b/bbl/i18n/pl/BambuStudio_pl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -10,8 +10,8 @@ msgstr ""
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && "
-"((n%100<12 || n%100>14))) ? 1 : 2;\n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && ((n"
+"%100<12 || n%100>14))) ? 1 : 2;\n"
 "X-Generator: Poedit 3.4.2\n"
 
 msgid "Supports Painting"
@@ -2869,6 +2869,12 @@ msgstr "Krok"
 msgid "AMS Slots"
 msgstr "Gniazda AMS"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7281,24 +7287,21 @@ msgstr "Bambu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Wyślij zadanie druku do"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Kliknij tutaj, jeśli nie możesz połączyć się z drukarką"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7330,9 +7333,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Użyj AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Kliknij tutaj, jeśli nie możesz połączyć się z drukarką"
-
 msgid "send completed"
 msgstr "wysłanie zakończone"
 
@@ -7524,8 +7524,16 @@ msgstr "Długość nazwy przekracza limit."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7860,8 +7868,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Podczas nagrywania timelapse'a bez głowicy zaleca się dodanie \"Timelaps - "
 "Wieża Czyszcząca\" \n"
@@ -8579,9 +8587,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -11831,10 +11845,10 @@ msgid ""
 "triangle mesh slicing. The gap closing operation may reduce the final print "
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
-"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania "
-"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może "
-"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej "
-"wartości na rozsądnie niskim poziomie."
+"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar"
+"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć "
+"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na "
+"rozsądnie niskim poziomie."
 
 msgid "Slicing Mode"
 msgstr "Tryb cięcia"
@@ -13706,8 +13720,8 @@ msgstr ""
 "Czy chcesz go zastąpić?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Nazwa profilu zostanie zmieniona na \"Dostawca Typ Seria @nazwa drukarki, "
@@ -15186,6 +15200,9 @@ msgstr ""
 "jak ABS, odpowiednie zwiększenie temperatury stołu grzejnego może zmniejszyć "
 "prawdopodobieństwo wypaczania."
 
+#~ msgid "Send print job to"
+#~ msgstr "Wyślij zadanie druku do"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Zapisz zmienione wartości"
 
diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
index 16b0185d3..2dd58bf15 100644
--- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
+++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
@@ -1,12 +1,12 @@
 # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER
 # This file is distributed under the same license as the PACKAGE package.
 # FIRST Translator Jiang Yue <maze1024@gmail.com>, 2019.
-# 
+#
 msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2871,6 +2871,12 @@ msgstr "Passo"
 msgid "AMS Slots"
 msgstr "Slots AMS"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7251,24 +7257,21 @@ msgstr "Placa PEI texturizada Bamabu"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Enviar trabalho de impressão para"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Clique aqui se você não conseguir se conectar à impressora"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7300,9 +7303,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Clique aqui se você não conseguir se conectar à impressora"
-
 msgid "send completed"
 msgstr "envio concluído"
 
@@ -7498,8 +7498,16 @@ msgstr "O tamanho do nome excede o limite."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7842,8 +7850,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Ao gravar o timelapse sem o cabeçote de ferramenta, é recomendável adicionar "
 "uma “Timelapse Wipe Tower” \n"
@@ -8558,9 +8566,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13687,8 +13701,8 @@ msgstr ""
 "Você quer reescrevê-lo?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Nós renomearíamos as predefinições como “Tipo de fornecedor Serial @printer "
@@ -15154,6 +15168,9 @@ msgstr ""
 "aumentar adequadamente a temperatura do leito térmico pode reduzir a "
 "probabilidade de deformação."
 
+#~ msgid "Send print job to"
+#~ msgstr "Enviar trabalho de impressão para"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po
index 4efa3c72d..56c7ed0f0 100644
--- a/bbl/i18n/ru/BambuStudio_ru.po
+++ b/bbl/i18n/ru/BambuStudio_ru.po
@@ -2,12 +2,12 @@
 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
 # This file is distributed under the same license as the PACKAGE package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-# 
+#
 msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: 2024-09-27 23:58+0700\n"
 "Last-Translator: \n"
 "Language-Team: Andylg <andylg@yandex.ru>\n"
@@ -15,8 +15,8 @@ msgstr ""
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
-"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
+"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
 "X-Generator: Poedit 3.5\n"
 
 msgid "Supports Painting"
@@ -2937,6 +2937,12 @@ msgstr "Шаг"
 msgid "AMS Slots"
 msgstr "Слоты АСПП"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7470,24 +7476,21 @@ msgstr "Текстурированная PEI пластина Bambu"
 msgid "Bambu Cool Plate SuperTack"
 msgstr "Не нагрев. пластина Bambu SuperTack"
 
-msgid "Send print job to"
-msgstr "Отправка задания на печать"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Не удаётся подключиться к принтеру?"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7521,9 +7524,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Исп. АСПП"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Не удаётся подключиться к принтеру?"
-
 msgid "send completed"
 msgstr "отправка завершена"
 
@@ -7721,8 +7721,16 @@ msgstr "Длина имени превышает установленное ог
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -8069,8 +8077,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "При записи таймлапса без видимости головы рекомендуется добавить «Черновая "
 "башня таймлапса». \n"
@@ -8804,9 +8812,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -14156,8 +14170,8 @@ msgstr ""
 "Хотите перезаписать его?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n"
@@ -15679,6 +15693,9 @@ msgstr ""
 "ABS, повышение температуры подогреваемого стола может снизить эту "
 "вероятность?"
 
+#~ msgid "Send print job to"
+#~ msgstr "Отправка задания на печать"
+
 # ??? Сохранить изменённые значения
 #~ msgid "Save Modified Value"
 #~ msgstr "Сохранить"
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index a22d15614..c1a57a3d0 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2841,6 +2841,12 @@ msgstr "Steg"
 msgid "AMS Slots"
 msgstr "AMS Fack"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7210,24 +7216,21 @@ msgstr "Bambu Lab texturerad PEI-platta"
 msgid "Bambu Cool Plate SuperTack"
 msgstr ""
 
-msgid "Send print job to"
-msgstr "Skicka utskriftsjobb till"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Klicka här om du inte kan ansluta till printern"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7259,9 +7262,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Use AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Klicka här om du inte kan ansluta till printern"
-
 msgid "send completed"
 msgstr "skicka slutförd"
 
@@ -7400,8 +7400,8 @@ msgstr ""
 msgid ""
 "Timelapse is not supported because Print sequence is set to \"By object\"."
 msgstr ""
-"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per "
-"objekt\"."
+"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt"
+"\"."
 
 msgid ""
 "You selected external and AMS filament at the same time in an extruder, you "
@@ -7457,8 +7457,16 @@ msgstr "Namnlängden överskrider gränsen."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7794,8 +7802,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
 "till ett \"Timelapse Wipe Tower\".\n"
@@ -8510,9 +8518,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13565,12 +13579,12 @@ msgstr ""
 "Vill du skriva om det?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers; please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -15017,6 +15031,9 @@ msgstr ""
 "ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten "
 "för vridning."
 
+#~ msgid "Send print job to"
+#~ msgstr "Skicka utskriftsjobb till"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Save Modified Value"
 
@@ -17504,9 +17521,9 @@ msgstr ""
 #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu "
 #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna "
 #~ "användningen av din Bambu Lab enhet godkänner du att följa "
-#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade "
-#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs "
-#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster."
+#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor"
+#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy "
+#~ "ska du inte använda Bambu Labs utrustning och tjänster."
 
 #~ msgid "The %s filament is too soft to be used with the AMS"
 #~ msgstr "Filament %s är för mjukt för att kunna användas med AMS"
diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po
index eece31577..8328cc317 100644
--- a/bbl/i18n/tr/BambuStudio_tr.po
+++ b/bbl/i18n/tr/BambuStudio_tr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: 2025-01-12 21:04+0300\n"
 "Last-Translator: Fatih AYDIN <fatihaydin5228@gmail.com>\n"
 "Language-Team: \n"
@@ -2859,6 +2859,12 @@ msgstr "Adım"
 msgid "AMS Slots"
 msgstr "AMS Yuvaları"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7298,24 +7304,21 @@ msgstr "Bamabu Dokulu PEI Tabak"
 msgid "Bambu Cool Plate SuperTack"
 msgstr "Bambu Soğuk Plaka SuperTack"
 
-msgid "Send print job to"
-msgstr "Yazdırma işini şuraya gönder"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Yazıcıya bağlanamıyorsanız burayı tıklayın"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7347,9 +7350,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "AMS kullanın"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Yazıcıya bağlanamıyorsanız burayı tıklayın"
-
 msgid "send completed"
 msgstr "gönderme tamamlandı"
 
@@ -7545,8 +7545,16 @@ msgstr "Ad uzunluğu sınırı aşıyor."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7883,8 +7891,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Araç başlığı olmadan timelapse kaydederken, bir \"Timelapse Wipe Tower\" "
 "eklenmesi önerilir.\n"
@@ -8597,9 +8605,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -9438,8 +9452,8 @@ msgid ""
 "Please select \"By object\" print sequence to print multiple objects in "
 "spiral vase mode."
 msgstr ""
-"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye "
-"göre\" yazdırma sırasını seçin."
+"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye göre"
+"\" yazdırma sırasını seçin."
 
 msgid ""
 "The spiral vase mode does not work when an object contains more than one "
@@ -13731,8 +13745,8 @@ msgstr ""
 "Yeniden yazmak ister misin?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Ön ayarları \"Satıcı Tipi Seri @seçtiğiniz yazıcı\" olarak yeniden "
@@ -15239,6 +15253,9 @@ msgstr ""
 "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını "
 "azaltabileceğini biliyor muydunuz."
 
+#~ msgid "Send print job to"
+#~ msgstr "Yazdırma işini şuraya gönder"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Değiştirilen Değeri Kaydet"
 
diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po
index 7a8505604..ba84bb465 100644
--- a/bbl/i18n/uk/BambuStudio_uk.po
+++ b/bbl/i18n/uk/BambuStudio_uk.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: BambuLab Україна\n"
@@ -2779,8 +2779,8 @@ msgstr "Будь ласка, введіть допустиме значення
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"
 msgstr ""
-"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах "
-"%.1f~%.1f)"
+"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах %.1f~"
+"%.1f)"
 
 msgid ""
 "The nozzle flow is not set. Please set the nozzle flow rate before editing "
@@ -2872,6 +2872,12 @@ msgstr "Крок"
 msgid "AMS Slots"
 msgstr "Слоти AMS"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr ""
+
+msgid "Select filament that installed to the right nozzle"
+msgstr ""
+
 msgid "Left AMS"
 msgstr ""
 
@@ -7317,24 +7323,21 @@ msgstr "Bamabu Textured PEI Plate"
 msgid "Bambu Cool Plate SuperTack"
 msgstr "Bambu Cool Plate SuperTack"
 
-msgid "Send print job to"
-msgstr "Надіслати завдання на друк на"
+msgid "Send print job"
+msgstr ""
 
 msgid "On"
 msgstr ""
 
-msgid "Left Extruder"
-msgstr ""
-
-msgid "Right Extruder"
-msgstr ""
-
 msgid "Rearrange filaments of the left and right nozzles ->"
 msgstr ""
 
 msgid "Your filament grouping method is not optimal."
 msgstr ""
 
+msgid "Click here if you can't connect to the printer"
+msgstr "Клацніть тут, якщо ви не можете підключитися до принтера"
+
 msgid "Advanced Options"
 msgstr ""
 
@@ -7366,9 +7369,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "Використовуйте AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "Клацніть тут, якщо ви не можете підключитися до принтера"
-
 msgid "send completed"
 msgstr "відправлення завершено"
 
@@ -7560,8 +7560,16 @@ msgstr "Довжина імені перевищує обмеження."
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
+msgstr ""
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
 msgstr ""
 
 msgid ""
@@ -7902,8 +7910,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "При записі таймлапсу без інструментальної головки рекомендується додати "
 "“Timelapse Wipe Tower” \n"
@@ -8621,9 +8629,15 @@ msgstr ""
 msgid "Overwriting"
 msgstr ""
 
+msgid "Left Extruder"
+msgstr ""
+
 msgid "(Recommended filament)"
 msgstr ""
 
+msgid "Right Extruder"
+msgstr ""
+
 msgid "Attention"
 msgstr ""
 
@@ -13781,8 +13795,8 @@ msgstr ""
 "Чи бажаєте ви їх перезаписати?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, "
@@ -15304,6 +15318,9 @@ msgstr ""
 "ABS, відповідне підвищення температури гарячого ліжка може зменшити "
 "ймовірність деформації."
 
+#~ msgid "Send print job to"
+#~ msgstr "Надіслати завдання на друк на"
+
 #~ msgid "Save Modified Value"
 #~ msgstr "Зберегти змінене значення"
 
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index ce18f5e4f..7287f0ac4 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-01-17 12:24+0800\n"
+"POT-Creation-Date: 2025-01-17 16:44+0800\n"
 "PO-Revision-Date: 2025-01-08 20:27+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -2796,6 +2796,12 @@ msgstr "步骤"
 msgid "AMS Slots"
 msgstr "AMS舱内材料"
 
+msgid "Select filament that installed to the left nozzle"
+msgstr "请选择安装到左喷嘴的耗材丝"
+
+msgid "Select filament that installed to the right nozzle"
+msgstr "请选择安装到右喷嘴的耗材丝"
+
 msgid "Left AMS"
 msgstr "左侧AMS"
 
@@ -5743,6 +5749,8 @@ msgid ""
 "with single-head printing. Please confirm which nozzle you would like to use "
 "for this project."
 msgstr ""
+"软件暂不支持使用两种不同直径的喷嘴同时打印，由于你设置的左右喷嘴不一致，我们"
+"只能采用单头打印。 请确认使用哪个喷嘴打印当前项目。"
 
 msgid "Switch diameter"
 msgstr ""
@@ -6398,7 +6406,7 @@ msgstr ""
 msgid ""
 "Currently, the object configuration form cannot be used with a multiple-"
 "extruder printer."
-msgstr "目前，对象配置表单不能与多头打印机一起使用。"
+msgstr "多喷嘴打印机暂不支持对象配置表单功能。"
 
 msgid "Not available"
 msgstr "不可用"
@@ -7053,23 +7061,20 @@ msgstr "纹理PEI打印板"
 msgid "Bambu Cool Plate SuperTack"
 msgstr "低温增稳打印板"
 
-msgid "Send print job to"
-msgstr "发送打印任务至"
+msgid "Send print job"
+msgstr "发送打印任务"
 
 msgid "On"
 msgstr "打开"
 
-msgid "Left Extruder"
-msgstr "左挤出机"
-
-msgid "Right Extruder"
-msgstr "右挤出机"
-
 msgid "Rearrange filaments of the left and right nozzles ->"
-msgstr ""
+msgstr "重新分配左右头耗材并切片->"
 
 msgid "Your filament grouping method is not optimal."
-msgstr ""
+msgstr "当前材料分组不是最优结果。"
+
+msgid "Click here if you can't connect to the printer"
+msgstr "如果您无法连接打印机，请点击这里"
 
 msgid "Advanced Options"
 msgstr "高级选项"
@@ -7108,9 +7113,6 @@ msgstr ""
 msgid "Use AMS"
 msgstr "使用AMS"
 
-msgid "Click here if you can't connect to the printer"
-msgstr "如果您无法连接打印机，请点击这里"
-
 msgid "send completed"
 msgstr "发送完成"
 
@@ -7283,9 +7285,18 @@ msgstr "名称长度超过限制。"
 
 #, c-format, boost-format
 msgid ""
-"You picked both external and AMS filament, You will need to manually change "
-"filament %d times."
+"It is not recommended to use AMS and external filaments simultaneously on "
+"the same nozzle. Otherwise, you will need to manually change filaments %d "
+"times for this print."
 msgstr ""
+"不推荐在同一个喷嘴上同时使用AMS和外挂料，否则此次打印你需要手动换料%d次。"
+
+#, c-format, boost-format
+msgid ""
+"It is not recommended to use AMS and external filaments simultaneously. "
+"Otherwise, you will need to manually change filaments %d times for this "
+"print."
+msgstr "不推荐同时使用AMS和外挂料，否则此次打印你需要手动换料%d次。"
 
 msgid ""
 "Tips: If you changed your nozzle of your printer lately, Please go to "
@@ -7607,8 +7618,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n"
 "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。"
@@ -8293,9 +8304,15 @@ msgstr "匹配"
 msgid "Overwriting"
 msgstr "覆盖"
 
+msgid "Left Extruder"
+msgstr "左挤出机"
+
 msgid "(Recommended filament)"
 msgstr "(推荐的材料)"
 
+msgid "Right Extruder"
+msgstr "右挤出机"
+
 msgid "Attention"
 msgstr "注意"
 
@@ -13034,8 +13051,8 @@ msgstr ""
 "你想重写预设吗"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n"
@@ -14108,13 +14125,15 @@ msgid ""
 "Calculate the best filament grouping to minimize filament waste. Need to "
 "manually place filaments on the printer based on slicing results."
 msgstr ""
-"以最小化耗材浪费为目标，切片时自动规划耗材的左右分组。需根据切片结果在打印机上调整耗材位置"
+"以最小化耗材浪费为目标，切片时自动规划耗材的左右分组。需根据切片结果在打印机"
+"上调整耗材位置"
 
 msgid ""
 "Calculate the filament grouping based on the printer's filaments, reducing "
 "the need for adjusting filaments at the printer."
 msgstr ""
-"为了减少去打印机手动调整耗材位置，切片时根据当前打印机的耗材摆放自动规划耗材的左右分组，但可能会有更多的耗材浪费"
+"为了减少去打印机手动调整耗材位置，切片时根据当前打印机的耗材摆放自动规划耗材"
+"的左右分组，但可能会有更多的耗材浪费"
 
 msgid "Manually assign filament to the left or right nozzle."
 msgstr "根据您的个人意愿，切片前手动设置耗材的左右分组"
@@ -14411,6 +14430,9 @@ msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
 
+#~ msgid "Send print job to"
+#~ msgstr "发送打印任务至"
+
 #~ msgid "Please set the number of ams installed on the this extrusion head."
 #~ msgstr "请设置该挤压头上安装的 ams 数量。"
 
@@ -20748,8 +20770,8 @@ msgstr ""
 #~ msgstr "正在准备设置页"
 
 #~ msgid ""
-#~ "You have the following presets with saved options for \"Print Host "
-#~ "upload\""
+#~ "You have the following presets with saved options for \"Print Host upload"
+#~ "\""
 #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"
 
 #~ msgid ""
diff --git a/resources/i18n/cs/BambuStudio.mo b/resources/i18n/cs/BambuStudio.mo
index f1e04f350..b1ce8aa18 100644
Binary files a/resources/i18n/cs/BambuStudio.mo and b/resources/i18n/cs/BambuStudio.mo differ
diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo
index 47e044973..a46881580 100644
Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ
diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo
index beb0438df..2853343e6 100644
Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ
diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo
index 23e614d85..4a9a5dc1c 100644
Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ
diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo
index 55704f0ba..be6be2312 100644
Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ
diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo
index 361cb5bc1..93fc77a05 100644
Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ
diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo
index 16296c035..0e06b49e2 100644
Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ
diff --git a/resources/i18n/ja/BambuStudio.mo b/resources/i18n/ja/BambuStudio.mo
index 99a4e49d5..762bfa6f0 100644
Binary files a/resources/i18n/ja/BambuStudio.mo and b/resources/i18n/ja/BambuStudio.mo differ
diff --git a/resources/i18n/ko/BambuStudio.mo b/resources/i18n/ko/BambuStudio.mo
index 5fada8bbb..47bcc51fc 100644
Binary files a/resources/i18n/ko/BambuStudio.mo and b/resources/i18n/ko/BambuStudio.mo differ
diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo
index 737a120d3..0efefd04f 100644
Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ
diff --git a/resources/i18n/pl/BambuStudio.mo b/resources/i18n/pl/BambuStudio.mo
index a96e6efac..c03423ebe 100644
Binary files a/resources/i18n/pl/BambuStudio.mo and b/resources/i18n/pl/BambuStudio.mo differ
diff --git a/resources/i18n/pt-BR/BambuStudio.mo b/resources/i18n/pt-BR/BambuStudio.mo
index 695664595..54a883e8a 100644
Binary files a/resources/i18n/pt-BR/BambuStudio.mo and b/resources/i18n/pt-BR/BambuStudio.mo differ
diff --git a/resources/i18n/pt_br/BambuStudio.mo b/resources/i18n/pt_br/BambuStudio.mo
index 695664595..54a883e8a 100644
Binary files a/resources/i18n/pt_br/BambuStudio.mo and b/resources/i18n/pt_br/BambuStudio.mo differ
diff --git a/resources/i18n/ru/BambuStudio.mo b/resources/i18n/ru/BambuStudio.mo
index ffe8037b0..dddc05cd5 100644
Binary files a/resources/i18n/ru/BambuStudio.mo and b/resources/i18n/ru/BambuStudio.mo differ
diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo
index d95481634..3a18f08d8 100644
Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ
diff --git a/resources/i18n/tr/BambuStudio.mo b/resources/i18n/tr/BambuStudio.mo
index 1b7eadd66..68b6b489e 100644
Binary files a/resources/i18n/tr/BambuStudio.mo and b/resources/i18n/tr/BambuStudio.mo differ
diff --git a/resources/i18n/uk/BambuStudio.mo b/resources/i18n/uk/BambuStudio.mo
index a32a8a69d..ad7175764 100644
Binary files a/resources/i18n/uk/BambuStudio.mo and b/resources/i18n/uk/BambuStudio.mo differ
diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo
index 4331ffaa4..1d343814b 100644
Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ
diff --git a/src/slic3r/GUI/AmsMappingPopup.cpp b/src/slic3r/GUI/AmsMappingPopup.cpp
index 9ab07228d..11d2d9568 100644
--- a/src/slic3r/GUI/AmsMappingPopup.cpp
+++ b/src/slic3r/GUI/AmsMappingPopup.cpp
@@ -354,12 +354,27 @@ AmsMapingPopup::AmsMapingPopup(wxWindow *parent)
      m_right_extra_slot->SetMinSize(wxSize(FromDIP(48), FromDIP(60)));
      m_right_extra_slot->SetMaxSize(wxSize(FromDIP(48), FromDIP(60)));
 
+     auto left_tips = new Label(m_left_marea_panel);
+     left_tips->SetForegroundColour(0x262E30);
+     left_tips->SetBackgroundColour(*wxWHITE);
+     left_tips->SetFont(::Label::Body_13);
+     left_tips->SetLabel(_L("Select filament that installed to the left nozzle"));
+
+
+     auto right_tips = new Label(m_right_marea_panel);
+     right_tips->SetForegroundColour(0x262E30);
+     right_tips->SetBackgroundColour(*wxWHITE);
+     right_tips->SetFont(::Label::Body_13);
+     right_tips->SetLabel(_L("Select filament that installed to the right nozzle"));
+
+     m_sizer_ams_left->Add(left_tips, 0, wxEXPAND|wxBOTTOM, FromDIP(8));
      m_sizer_ams_left->Add(create_split_sizer(m_left_marea_panel, _L("Left AMS")), 0, wxEXPAND, 0);
      m_sizer_ams_left->Add(m_sizer_ams_basket_left, 0, wxEXPAND|wxTOP, FromDIP(8));
      m_sizer_ams_left->Add(create_split_sizer(m_left_marea_panel, _L("External")), 0, wxEXPAND|wxTOP, FromDIP(8));
      //m_sizer_ams_left->Add(m_left_extra_slot, 0, wxEXPAND|wxTOP, FromDIP(8));
      m_sizer_ams_left->Add(sizer_temp, 0, wxEXPAND | wxTOP, FromDIP(8));
 
+     m_sizer_ams_right->Add(right_tips, 0, wxEXPAND|wxBOTTOM, FromDIP(8));
      m_right_split_ams_sizer = create_split_sizer(m_right_marea_panel, _L("Right AMS"));
      m_sizer_ams_right->Add(m_right_split_ams_sizer, 0, wxEXPAND, 0);
      m_sizer_ams_right->Add(m_sizer_ams_basket_right, 0, wxEXPAND|wxTOP, FromDIP(8));
@@ -693,10 +708,10 @@ void AmsMapingPopup::update(MachineObject* obj)
             m_amsmapping_container_list.push_back(ams_mapping_item_container);
 
             if (nozzle_id == 0) {   //right slot
-                m_sizer_ams_basket_right->Add(ams_mapping_item_container, 0, wxALIGN_CENTER, 0);
+                m_sizer_ams_basket_right->Add(ams_mapping_item_container, 0, wxLEFT, 0);
             }
             else if (nozzle_id == 1) {  //left slot
-                m_sizer_ams_basket_left->Add(ams_mapping_item_container, 0, wxALIGN_CENTER, 0);
+                m_sizer_ams_basket_left->Add(ams_mapping_item_container, 0, wxLEFT, 0);
             }
 
             //m_warning_text->Show(m_has_unmatch_filament);
diff --git a/src/slic3r/GUI/SelectMachine.cpp b/src/slic3r/GUI/SelectMachine.cpp
index fad54f1d1..bb00a15c2 100644
--- a/src/slic3r/GUI/SelectMachine.cpp
+++ b/src/slic3r/GUI/SelectMachine.cpp
@@ -90,7 +90,7 @@ void                SelectMachineDialog::init_machine_bed_types()
     }
 }
 SelectMachineDialog::SelectMachineDialog(Plater *plater)
-    : DPIDialog(static_cast<wxWindow *>(wxGetApp().mainframe), wxID_ANY, _L("Send print job to"), wxDefaultPosition, wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
+    : DPIDialog(static_cast<wxWindow *>(wxGetApp().mainframe), wxID_ANY, _L("Send print job"), wxDefaultPosition, wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
     , m_plater(plater), m_export_3mf_cancel(false)
     , m_mapping_popup(AmsMapingPopup(this))
     , m_mapping_tip_popup(AmsMapingTipPopup(this))