From 63dc16c8a464241385ec39d214cb08c6f79cc9e0 Mon Sep 17 00:00:00 2001 From: whoseyoung Date: Fri, 1 Nov 2024 11:09:22 +0800 Subject: [PATCH] Add geeetech M1 printer Printing settings for the M1 machine provided by Geeetech officially. --- resources/profiles/Geeetech.json | 42 ++++++------- .../filament/Generic PETG @Geeetech.json | 62 +++++++++---------- .../filament/Generic PLA @Geeetech.json | 54 ++++++++-------- .../Generic PLA @Geeetech_FastSpeed.json | 16 ++--- .../filament/Generic PLA-CF @Geeetech.json | 62 +++++++++---------- .../filament/Generic PVA @Geeetech.json | 54 ++++++++-------- .../filament/Generic TPU @Geeetech.json | 62 +++++++++---------- .../machine/Geeetech M1 0.2 nozzle.json | 12 ++-- .../machine/Geeetech M1 0.4 nozzle.json | 12 ++-- .../machine/Geeetech M1 0.6 nozzle.json | 12 ++-- .../machine/Geeetech M1 0.8 nozzle.json | 12 ++-- .../Geeetech/machine/fdm_geeetech_common.json | 1 - .../0.08mm Extra Fine @Geeetech M1.json | 29 +++++---- ....08mm Optimal @Geeetech M1 0.2 nozzle.json | 29 +++++---- .../process/0.10mm Fine @Geeetech M1.json | 29 +++++---- ...10mm Standard @Geeetech M1 0.2 nozzle.json | 29 +++++---- .../0.12mm Draft @Geeetech M1 0.2 nozzle.json | 29 +++++---- ...m Extra Draft @Geeetech M1 0.2 nozzle.json | 29 +++++---- .../process/0.16mm Optimal @Geeetech M1.json | 29 +++++---- .../process/0.20mm Standard @Geeetech M1.json | 31 ++++++---- ....24mm Optimal @Geeetech M1 0.6 nozzle.json | 29 +++++---- .../process/0.25mm Draft @Geeetech M1.json | 31 ++++++---- ...30mm Standard @Geeetech M1 0.6 nozzle.json | 29 +++++---- .../0.36mm Draft @Geeetech M1 0.6 nozzle.json | 29 +++++---- ....36mm Optimal @Geeetech M1 0.8 nozzle.json | 29 +++++---- .../0.44mm Draft @Geeetech M1 0.8 nozzle.json | 29 +++++---- .../process/fdm_process_Geeetech_HS_0.20.json | 2 +- .../process/fdm_process_Geeetech_HS_0.25.json | 4 +- 28 files changed, 457 insertions(+), 360 deletions(-) diff --git a/resources/profiles/Geeetech.json b/resources/profiles/Geeetech.json index 434721e8f..d6c66a84e 100644 --- a/resources/profiles/Geeetech.json +++ b/resources/profiles/Geeetech.json @@ -8,22 +8,22 @@ "name": "Geeetech Thunder", "sub_path": "machine/Geeetech Thunder.json" }, - { + { "name": "Geeetech Mizar M", "sub_path": "machine/Geeetech Mizar M.json" }, - { + { "name": "Geeetech Mizar S", "sub_path": "machine/Geeetech Mizar S.json" }, - { + { "name": "Geeetech Mizar Pro", "sub_path": "machine/Geeetech Mizar Pro.json" }, { "name": "Geeetech Mizar Max", "sub_path": "machine/Geeetech Mizar Max.json" - }, + }, { "name": "Geeetech Mizar", "sub_path": "machine/Geeetech Mizar.json" @@ -67,7 +67,7 @@ { "name": "Geeetech M1", "sub_path": "machine/Geeetech M1.json" - } + } ], "process_list": [ { @@ -221,7 +221,7 @@ { "name": "fdm_process_geeetech_0.56_nozzle_0.8", "sub_path": "process/fdm_process_geeetech_0.56_nozzle_0.8.json" - }, + }, { "name": "0.06mm Fine @Geeetech common 0.2 nozzle", "sub_path": "process/0.06mm Fine @Geeetech common 0.2 nozzle.json" @@ -229,7 +229,7 @@ { "name": "0.08mm Extra Fine @Geeetech common", "sub_path": "process/0.08mm Extra Fine @Geeetech common.json" - }, + }, { "name": "0.08mm Extra Fine @Geeetech Thunder", "sub_path": "process/0.08mm Extra Fine @Geeetech Thunder.json" @@ -373,7 +373,7 @@ { "name": "0.08mm Extra Fine @Geeetech M1", "sub_path": "process/0.08mm Extra Fine @Geeetech M1.json" - }, + }, { "name": "0.08mm Optimal @Geeetech M1 0.2 nozzle", "sub_path": "process/0.08mm Optimal @Geeetech M1 0.2 nozzle.json" @@ -381,7 +381,7 @@ { "name": "0.10mm Fine @Geeetech M1", "sub_path": "process/0.10mm Fine @Geeetech M1.json" - }, + }, { "name": "0.10mm Standard @Geeetech M1 0.2 nozzle", "sub_path": "process/0.10mm Standard @Geeetech M1 0.2 nozzle.json" @@ -389,7 +389,7 @@ { "name": "0.12mm Draft @Geeetech M1 0.2 nozzle", "sub_path": "process/0.12mm Draft @Geeetech M1 0.2 nozzle.json" - }, + }, { "name": "0.14mm Extra Draft @Geeetech M1 0.2 nozzle", "sub_path": "process/0.14mm Extra Draft @Geeetech M1 0.2 nozzle.json" @@ -397,15 +397,15 @@ { "name": "0.16mm Optimal @Geeetech M1", "sub_path": "process/0.16mm Optimal @Geeetech M1.json" - }, - { - "name": "0.24mm Optimal @Geeetech M1 0.6 nozzle", - "sub_path": "process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json" - }, + }, { "name": "0.20mm Standard @Geeetech M1", "sub_path": "process/0.20mm Standard @Geeetech M1.json" - }, + }, + { + "name": "0.24mm Optimal @Geeetech M1 0.6 nozzle", + "sub_path": "process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json" + }, { "name": "0.25mm Draft @Geeetech M1", "sub_path": "process/0.25mm Draft @Geeetech M1.json" @@ -413,11 +413,11 @@ { "name": "0.30mm Standard @Geeetech M1 0.6 nozzle", "sub_path": "process/0.30mm Standard @Geeetech M1 0.6 nozzle.json" - }, + }, { "name": "0.36mm Draft @Geeetech M1 0.6 nozzle", "sub_path": "process/0.36mm Draft @Geeetech M1 0.6 nozzle.json" - }, + }, { "name": "0.36mm Optimal @Geeetech M1 0.8 nozzle", "sub_path": "process/0.36mm Optimal @Geeetech M1 0.8 nozzle.json" @@ -425,7 +425,7 @@ { "name": "0.44mm Draft @Geeetech M1 0.8 nozzle", "sub_path": "process/0.44mm Draft @Geeetech M1 0.8 nozzle.json" - } + } ], "filament_list": [ { @@ -491,7 +491,7 @@ { "name": "Generic PLA @Geeetech_FastSpeed", "sub_path": "filament/Generic PLA @Geeetech_FastSpeed.json" - }, + }, { "name": "Generic PLA-CF @Geeetech", "sub_path": "filament/Generic PLA-CF @Geeetech.json" @@ -689,6 +689,6 @@ { "name": "Geeetech M1 0.8 nozzle", "sub_path": "machine/Geeetech M1 0.8 nozzle.json" - } + } ] } \ No newline at end of file diff --git a/resources/profiles/Geeetech/filament/Generic PETG @Geeetech.json b/resources/profiles/Geeetech/filament/Generic PETG @Geeetech.json index c5adbe3d5..b003156d2 100644 --- a/resources/profiles/Geeetech/filament/Generic PETG @Geeetech.json +++ b/resources/profiles/Geeetech/filament/Generic PETG @Geeetech.json @@ -48,9 +48,9 @@ "Geeetech A10 Pro 0.6 nozzle", "Geeetech A10 Pro 0.8 nozzle", "Geeetech A20 0.2 nozzle", - "Geeetech A20 0.4 nozzle", - "Geeetech A20 0.6 nozzle", - "Geeetech A20 0.8 nozzle", + "Geeetech A20 0.4 nozzle", + "Geeetech A20 0.6 nozzle", + "Geeetech A20 0.8 nozzle", "Geeetech A30 Pro 0.2 nozzle", "Geeetech A30 Pro 0.4 nozzle", "Geeetech A30 Pro 0.6 nozzle", @@ -58,33 +58,33 @@ "Geeetech A10 M 0.4 nozzle", "Geeetech A20 M 0.4 nozzle", "Geeetech A30 M 0.4 nozzle", - "Geeetech A10 T 0.4 nozzle", - "Geeetech A20 T 0.4 nozzle", - "Geeetech A30 T 0.4 nozzle", - "Geeetech Mizar 0.2 nozzle", - "Geeetech Mizar 0.4 nozzle", - "Geeetech Mizar 0.6 nozzle", - "Geeetech Mizar 0.8 nozzle", - "Geeetech Mizar S 0.2 nozzle", - "Geeetech Mizar S 0.4 nozzle", - "Geeetech Mizar S 0.6 nozzle", - "Geeetech Mizar S 0.8 nozzle", - "Geeetech Mizar Pro 0.2 nozzle", - "Geeetech Mizar Pro 0.4 nozzle", - "Geeetech Mizar Pro 0.6 nozzle", - "Geeetech Mizar Pro 0.8 nozzle", - "Geeetech Mizar Max 0.2 nozzle", - "Geeetech Mizar Max 0.4 nozzle", - "Geeetech Mizar Max 0.6 nozzle", - "Geeetech Mizar Max 0.8 nozzle", - "Geeetech Mizar M 0.4 nozzle", - "Geeetech Thunder 0.2 nozzle", - "Geeetech Thunder 0.4 nozzle", - "Geeetech Thunder 0.6 nozzle", - "Geeetech Thunder 0.8 nozzle", - "Geeetech M1 0.2 nozzle", - "Geeetech M1 0.4 nozzle", - "Geeetech M1 0.6 nozzle", - "Geeetech M1 0.8 nozzle" + "Geeetech A10 T 0.4 nozzle", + "Geeetech A20 T 0.4 nozzle", + "Geeetech A30 T 0.4 nozzle", + "Geeetech Mizar 0.2 nozzle", + "Geeetech Mizar 0.4 nozzle", + "Geeetech Mizar 0.6 nozzle", + "Geeetech Mizar 0.8 nozzle", + "Geeetech Mizar S 0.2 nozzle", + "Geeetech Mizar S 0.4 nozzle", + "Geeetech Mizar S 0.6 nozzle", + "Geeetech Mizar S 0.8 nozzle", + "Geeetech Mizar Pro 0.2 nozzle", + "Geeetech Mizar Pro 0.4 nozzle", + "Geeetech Mizar Pro 0.6 nozzle", + "Geeetech Mizar Pro 0.8 nozzle", + "Geeetech Mizar Max 0.2 nozzle", + "Geeetech Mizar Max 0.4 nozzle", + "Geeetech Mizar Max 0.6 nozzle", + "Geeetech Mizar Max 0.8 nozzle", + "Geeetech Mizar M 0.4 nozzle", + "Geeetech Thunder 0.2 nozzle", + "Geeetech Thunder 0.4 nozzle", + "Geeetech Thunder 0.6 nozzle", + "Geeetech Thunder 0.8 nozzle", + "Geeetech M1 0.2 nozzle", + "Geeetech M1 0.4 nozzle", + "Geeetech M1 0.6 nozzle", + "Geeetech M1 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Geeetech/filament/Generic PLA @Geeetech.json b/resources/profiles/Geeetech/filament/Generic PLA @Geeetech.json index 1c74088c4..3606f07d2 100644 --- a/resources/profiles/Geeetech/filament/Generic PLA @Geeetech.json +++ b/resources/profiles/Geeetech/filament/Generic PLA @Geeetech.json @@ -17,9 +17,9 @@ "Geeetech A10 Pro 0.6 nozzle", "Geeetech A10 Pro 0.8 nozzle", "Geeetech A20 0.2 nozzle", - "Geeetech A20 0.4 nozzle", - "Geeetech A20 0.6 nozzle", - "Geeetech A20 0.8 nozzle", + "Geeetech A20 0.4 nozzle", + "Geeetech A20 0.6 nozzle", + "Geeetech A20 0.8 nozzle", "Geeetech A30 Pro 0.2 nozzle", "Geeetech A30 Pro 0.4 nozzle", "Geeetech A30 Pro 0.6 nozzle", @@ -27,29 +27,29 @@ "Geeetech A10 M 0.4 nozzle", "Geeetech A20 M 0.4 nozzle", "Geeetech A30 M 0.4 nozzle", - "Geeetech A10 T 0.4 nozzle", - "Geeetech A20 T 0.4 nozzle", - "Geeetech A30 T 0.4 nozzle", - "Geeetech Mizar 0.2 nozzle", - "Geeetech Mizar 0.4 nozzle", - "Geeetech Mizar 0.6 nozzle", - "Geeetech Mizar 0.8 nozzle", - "Geeetech Mizar S 0.2 nozzle", - "Geeetech Mizar S 0.4 nozzle", - "Geeetech Mizar S 0.6 nozzle", - "Geeetech Mizar S 0.8 nozzle", - "Geeetech Mizar Pro 0.2 nozzle", - "Geeetech Mizar Pro 0.4 nozzle", - "Geeetech Mizar Pro 0.6 nozzle", - "Geeetech Mizar Pro 0.8 nozzle", - "Geeetech Mizar Max 0.2 nozzle", - "Geeetech Mizar Max 0.4 nozzle", - "Geeetech Mizar Max 0.6 nozzle", - "Geeetech Mizar Max 0.8 nozzle", - "Geeetech Mizar M 0.4 nozzle", - "Geeetech M1 0.2 nozzle", - "Geeetech M1 0.4 nozzle", - "Geeetech M1 0.6 nozzle", - "Geeetech M1 0.8 nozzle" + "Geeetech A10 T 0.4 nozzle", + "Geeetech A20 T 0.4 nozzle", + "Geeetech A30 T 0.4 nozzle", + "Geeetech Mizar 0.2 nozzle", + "Geeetech Mizar 0.4 nozzle", + "Geeetech Mizar 0.6 nozzle", + "Geeetech Mizar 0.8 nozzle", + "Geeetech Mizar S 0.2 nozzle", + "Geeetech Mizar S 0.4 nozzle", + "Geeetech Mizar S 0.6 nozzle", + "Geeetech Mizar S 0.8 nozzle", + "Geeetech Mizar Pro 0.2 nozzle", + "Geeetech Mizar Pro 0.4 nozzle", + "Geeetech Mizar Pro 0.6 nozzle", + "Geeetech Mizar Pro 0.8 nozzle", + "Geeetech Mizar Max 0.2 nozzle", + "Geeetech Mizar Max 0.4 nozzle", + "Geeetech Mizar Max 0.6 nozzle", + "Geeetech Mizar Max 0.8 nozzle", + "Geeetech Mizar M 0.4 nozzle", + "Geeetech M1 0.2 nozzle", + "Geeetech M1 0.4 nozzle", + "Geeetech M1 0.6 nozzle", + "Geeetech M1 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Geeetech/filament/Generic PLA @Geeetech_FastSpeed.json b/resources/profiles/Geeetech/filament/Generic PLA @Geeetech_FastSpeed.json index 7d1d2e86e..c1d3566c4 100644 --- a/resources/profiles/Geeetech/filament/Generic PLA @Geeetech_FastSpeed.json +++ b/resources/profiles/Geeetech/filament/Generic PLA @Geeetech_FastSpeed.json @@ -19,13 +19,13 @@ "hot_plate_temp_initial_layer": ["65"], "textured_plate_temp_initial_layer": ["65"], "compatible_printers": [ - "Geeetech Thunder 0.2 nozzle", - "Geeetech Thunder 0.4 nozzle", - "Geeetech Thunder 0.6 nozzle", - "Geeetech Thunder 0.8 nozzle", - "Geeetech M1 0.2 nozzle", - "Geeetech M1 0.4 nozzle", - "Geeetech M1 0.6 nozzle", - "Geeetech M1 0.8 nozzle" + "Geeetech Thunder 0.2 nozzle", + "Geeetech Thunder 0.4 nozzle", + "Geeetech Thunder 0.6 nozzle", + "Geeetech Thunder 0.8 nozzle", + "Geeetech M1 0.2 nozzle", + "Geeetech M1 0.4 nozzle", + "Geeetech M1 0.6 nozzle", + "Geeetech M1 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Geeetech/filament/Generic PLA-CF @Geeetech.json b/resources/profiles/Geeetech/filament/Generic PLA-CF @Geeetech.json index 6489909a0..3c0774780 100644 --- a/resources/profiles/Geeetech/filament/Generic PLA-CF @Geeetech.json +++ b/resources/profiles/Geeetech/filament/Generic PLA-CF @Geeetech.json @@ -24,9 +24,9 @@ "Geeetech A10 Pro 0.6 nozzle", "Geeetech A10 Pro 0.8 nozzle", "Geeetech A20 0.2 nozzle", - "Geeetech A20 0.4 nozzle", - "Geeetech A20 0.6 nozzle", - "Geeetech A20 0.8 nozzle", + "Geeetech A20 0.4 nozzle", + "Geeetech A20 0.6 nozzle", + "Geeetech A20 0.8 nozzle", "Geeetech A30 Pro 0.2 nozzle", "Geeetech A30 Pro 0.4 nozzle", "Geeetech A30 Pro 0.6 nozzle", @@ -34,33 +34,33 @@ "Geeetech A10 M 0.4 nozzle", "Geeetech A20 M 0.4 nozzle", "Geeetech A30 M 0.4 nozzle", - "Geeetech A10 T 0.4 nozzle", - "Geeetech A20 T 0.4 nozzle", - "Geeetech A30 T 0.4 nozzle", - "Geeetech Mizar 0.2 nozzle", - "Geeetech Mizar 0.4 nozzle", - "Geeetech Mizar 0.6 nozzle", - "Geeetech Mizar 0.8 nozzle", - "Geeetech Mizar S 0.2 nozzle", - "Geeetech Mizar S 0.4 nozzle", - "Geeetech Mizar S 0.6 nozzle", - "Geeetech Mizar S 0.8 nozzle", - "Geeetech Mizar Pro 0.2 nozzle", - "Geeetech Mizar Pro 0.4 nozzle", - "Geeetech Mizar Pro 0.6 nozzle", - "Geeetech Mizar Pro 0.8 nozzle", - "Geeetech Mizar Max 0.2 nozzle", - "Geeetech Mizar Max 0.4 nozzle", - "Geeetech Mizar Max 0.6 nozzle", - "Geeetech Mizar Max 0.8 nozzle", - "Geeetech Mizar M 0.4 nozzle", - "Geeetech Thunder 0.2 nozzle", - "Geeetech Thunder 0.4 nozzle", - "Geeetech Thunder 0.6 nozzle", - "Geeetech Thunder 0.8 nozzle", - "Geeetech M1 0.2 nozzle", - "Geeetech M1 0.4 nozzle", - "Geeetech M1 0.6 nozzle", - "Geeetech M1 0.8 nozzle" + "Geeetech A10 T 0.4 nozzle", + "Geeetech A20 T 0.4 nozzle", + "Geeetech A30 T 0.4 nozzle", + "Geeetech Mizar 0.2 nozzle", + "Geeetech Mizar 0.4 nozzle", + "Geeetech Mizar 0.6 nozzle", + "Geeetech Mizar 0.8 nozzle", + "Geeetech Mizar S 0.2 nozzle", + "Geeetech Mizar S 0.4 nozzle", + "Geeetech Mizar S 0.6 nozzle", + "Geeetech Mizar S 0.8 nozzle", + "Geeetech Mizar Pro 0.2 nozzle", + "Geeetech Mizar Pro 0.4 nozzle", + "Geeetech Mizar Pro 0.6 nozzle", + "Geeetech Mizar Pro 0.8 nozzle", + "Geeetech Mizar Max 0.2 nozzle", + "Geeetech Mizar Max 0.4 nozzle", + "Geeetech Mizar Max 0.6 nozzle", + "Geeetech Mizar Max 0.8 nozzle", + "Geeetech Mizar M 0.4 nozzle", + "Geeetech Thunder 0.2 nozzle", + "Geeetech Thunder 0.4 nozzle", + "Geeetech Thunder 0.6 nozzle", + "Geeetech Thunder 0.8 nozzle", + "Geeetech M1 0.2 nozzle", + "Geeetech M1 0.4 nozzle", + "Geeetech M1 0.6 nozzle", + "Geeetech M1 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Geeetech/filament/Generic PVA @Geeetech.json b/resources/profiles/Geeetech/filament/Generic PVA @Geeetech.json index 45342caf6..165abbe22 100644 --- a/resources/profiles/Geeetech/filament/Generic PVA @Geeetech.json +++ b/resources/profiles/Geeetech/filament/Generic PVA @Geeetech.json @@ -24,9 +24,9 @@ "Geeetech A10 Pro 0.6 nozzle", "Geeetech A10 Pro 0.8 nozzle", "Geeetech A20 0.2 nozzle", - "Geeetech A20 0.4 nozzle", - "Geeetech A20 0.6 nozzle", - "Geeetech A20 0.8 nozzle", + "Geeetech A20 0.4 nozzle", + "Geeetech A20 0.6 nozzle", + "Geeetech A20 0.8 nozzle", "Geeetech A30 Pro 0.2 nozzle", "Geeetech A30 Pro 0.4 nozzle", "Geeetech A30 Pro 0.6 nozzle", @@ -34,29 +34,29 @@ "Geeetech A10 M 0.4 nozzle", "Geeetech A20 M 0.4 nozzle", "Geeetech A30 M 0.4 nozzle", - "Geeetech A10 T 0.4 nozzle", - "Geeetech A20 T 0.4 nozzle", - "Geeetech A30 T 0.4 nozzle", - "Geeetech Mizar 0.2 nozzle", - "Geeetech Mizar 0.4 nozzle", - "Geeetech Mizar 0.6 nozzle", - "Geeetech Mizar 0.8 nozzle", - "Geeetech Mizar S 0.2 nozzle", - "Geeetech Mizar S 0.4 nozzle", - "Geeetech Mizar S 0.6 nozzle", - "Geeetech Mizar S 0.8 nozzle", - "Geeetech Mizar Pro 0.2 nozzle", - "Geeetech Mizar Pro 0.4 nozzle", - "Geeetech Mizar Pro 0.6 nozzle", - "Geeetech Mizar Pro 0.8 nozzle", - "Geeetech Mizar Max 0.2 nozzle", - "Geeetech Mizar Max 0.4 nozzle", - "Geeetech Mizar Max 0.6 nozzle", - "Geeetech Mizar Max 0.8 nozzle", - "Geeetech Mizar M 0.4 nozzle", - "Geeetech M1 0.2 nozzle", - "Geeetech M1 0.4 nozzle", - "Geeetech M1 0.6 nozzle", - "Geeetech M1 0.8 nozzle" + "Geeetech A10 T 0.4 nozzle", + "Geeetech A20 T 0.4 nozzle", + "Geeetech A30 T 0.4 nozzle", + "Geeetech Mizar 0.2 nozzle", + "Geeetech Mizar 0.4 nozzle", + "Geeetech Mizar 0.6 nozzle", + "Geeetech Mizar 0.8 nozzle", + "Geeetech Mizar S 0.2 nozzle", + "Geeetech Mizar S 0.4 nozzle", + "Geeetech Mizar S 0.6 nozzle", + "Geeetech Mizar S 0.8 nozzle", + "Geeetech Mizar Pro 0.2 nozzle", + "Geeetech Mizar Pro 0.4 nozzle", + "Geeetech Mizar Pro 0.6 nozzle", + "Geeetech Mizar Pro 0.8 nozzle", + "Geeetech Mizar Max 0.2 nozzle", + "Geeetech Mizar Max 0.4 nozzle", + "Geeetech Mizar Max 0.6 nozzle", + "Geeetech Mizar Max 0.8 nozzle", + "Geeetech Mizar M 0.4 nozzle", + "Geeetech M1 0.2 nozzle", + "Geeetech M1 0.4 nozzle", + "Geeetech M1 0.6 nozzle", + "Geeetech M1 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Geeetech/filament/Generic TPU @Geeetech.json b/resources/profiles/Geeetech/filament/Generic TPU @Geeetech.json index 06af7a933..31f225a4d 100644 --- a/resources/profiles/Geeetech/filament/Generic TPU @Geeetech.json +++ b/resources/profiles/Geeetech/filament/Generic TPU @Geeetech.json @@ -15,9 +15,9 @@ "Geeetech A10 Pro 0.6 nozzle", "Geeetech A10 Pro 0.8 nozzle", "Geeetech A20 0.2 nozzle", - "Geeetech A20 0.4 nozzle", - "Geeetech A20 0.6 nozzle", - "Geeetech A20 0.8 nozzle", + "Geeetech A20 0.4 nozzle", + "Geeetech A20 0.6 nozzle", + "Geeetech A20 0.8 nozzle", "Geeetech A30 Pro 0.2 nozzle", "Geeetech A30 Pro 0.4 nozzle", "Geeetech A30 Pro 0.6 nozzle", @@ -25,33 +25,33 @@ "Geeetech A10 M 0.4 nozzle", "Geeetech A20 M 0.4 nozzle", "Geeetech A30 M 0.4 nozzle", - "Geeetech A10 T 0.4 nozzle", - "Geeetech A20 T 0.4 nozzle", - "Geeetech A30 T 0.4 nozzle", - "Geeetech Mizar 0.2 nozzle", - "Geeetech Mizar 0.4 nozzle", - "Geeetech Mizar 0.6 nozzle", - "Geeetech Mizar 0.8 nozzle", - "Geeetech Mizar S 0.2 nozzle", - "Geeetech Mizar S 0.4 nozzle", - "Geeetech Mizar S 0.6 nozzle", - "Geeetech Mizar S 0.8 nozzle", - "Geeetech Mizar Pro 0.2 nozzle", - "Geeetech Mizar Pro 0.4 nozzle", - "Geeetech Mizar Pro 0.6 nozzle", - "Geeetech Mizar Pro 0.8 nozzle", - "Geeetech Mizar Max 0.2 nozzle", - "Geeetech Mizar Max 0.4 nozzle", - "Geeetech Mizar Max 0.6 nozzle", - "Geeetech Mizar Max 0.8 nozzle", - "Geeetech Mizar M 0.4 nozzle", - "Geeetech Thunder 0.2 nozzle", - "Geeetech Thunder 0.4 nozzle", - "Geeetech Thunder 0.6 nozzle", - "Geeetech Thunder 0.8 nozzle", - "Geeetech M1 0.2 nozzle", - "Geeetech M1 0.4 nozzle", - "Geeetech M1 0.6 nozzle", - "Geeetech M1 0.8 nozzle" + "Geeetech A10 T 0.4 nozzle", + "Geeetech A20 T 0.4 nozzle", + "Geeetech A30 T 0.4 nozzle", + "Geeetech Mizar 0.2 nozzle", + "Geeetech Mizar 0.4 nozzle", + "Geeetech Mizar 0.6 nozzle", + "Geeetech Mizar 0.8 nozzle", + "Geeetech Mizar S 0.2 nozzle", + "Geeetech Mizar S 0.4 nozzle", + "Geeetech Mizar S 0.6 nozzle", + "Geeetech Mizar S 0.8 nozzle", + "Geeetech Mizar Pro 0.2 nozzle", + "Geeetech Mizar Pro 0.4 nozzle", + "Geeetech Mizar Pro 0.6 nozzle", + "Geeetech Mizar Pro 0.8 nozzle", + "Geeetech Mizar Max 0.2 nozzle", + "Geeetech Mizar Max 0.4 nozzle", + "Geeetech Mizar Max 0.6 nozzle", + "Geeetech Mizar Max 0.8 nozzle", + "Geeetech Mizar M 0.4 nozzle", + "Geeetech Thunder 0.2 nozzle", + "Geeetech Thunder 0.4 nozzle", + "Geeetech Thunder 0.6 nozzle", + "Geeetech Thunder 0.8 nozzle", + "Geeetech M1 0.2 nozzle", + "Geeetech M1 0.4 nozzle", + "Geeetech M1 0.6 nozzle", + "Geeetech M1 0.8 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Geeetech/machine/Geeetech M1 0.2 nozzle.json b/resources/profiles/Geeetech/machine/Geeetech M1 0.2 nozzle.json index d3355efe9..938e8eacf 100644 --- a/resources/profiles/Geeetech/machine/Geeetech M1 0.2 nozzle.json +++ b/resources/profiles/Geeetech/machine/Geeetech M1 0.2 nozzle.json @@ -15,8 +15,8 @@ "0.2" ], "extruder_type": [ - "Direct" - ], + "Direct Drive" + ], "machine_max_acceleration_e": [ "2000", "2000" @@ -76,7 +76,7 @@ "machine_max_jerk_z": [ "3", "3" - ], + ], "max_layer_height": [ "0.14" ], @@ -91,7 +91,7 @@ ], "deretraction_speed": [ "40" - ], + ], "printable_area": [ "0x0", "105x0", @@ -102,8 +102,8 @@ "retract_lift_below":[ "95" ], - "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", - "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00", "nozzle_type": "brass", "auxiliary_fan": "0" } \ No newline at end of file diff --git a/resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json b/resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json index a3925678b..05d8edfd3 100644 --- a/resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json +++ b/resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json @@ -15,8 +15,8 @@ "0.4" ], "extruder_type": [ - "Direct" - ], + "Direct Drive" + ], "machine_max_acceleration_e": [ "2000", "2000" @@ -76,7 +76,7 @@ "machine_max_jerk_z": [ "3", "3" - ], + ], "max_layer_height": [ "0.14" ], @@ -91,7 +91,7 @@ ], "deretraction_speed": [ "40" - ], + ], "max_layer_height": [ "0.3" ], @@ -108,8 +108,8 @@ "retract_lift_below":[ "95" ], - "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", - "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00", "nozzle_type": "brass", "auxiliary_fan": "0" } \ No newline at end of file diff --git a/resources/profiles/Geeetech/machine/Geeetech M1 0.6 nozzle.json b/resources/profiles/Geeetech/machine/Geeetech M1 0.6 nozzle.json index de834f01a..1eb847f72 100644 --- a/resources/profiles/Geeetech/machine/Geeetech M1 0.6 nozzle.json +++ b/resources/profiles/Geeetech/machine/Geeetech M1 0.6 nozzle.json @@ -15,8 +15,8 @@ "0.6" ], "extruder_type": [ - "Direct" - ], + "Direct Drive" + ], "machine_max_acceleration_e": [ "2000", "2000" @@ -76,7 +76,7 @@ "machine_max_jerk_z": [ "3", "3" - ], + ], "max_layer_height": [ "0.14" ], @@ -91,7 +91,7 @@ ], "deretraction_speed": [ "40" - ], + ], "max_layer_height": [ "0.42" ], @@ -108,8 +108,8 @@ "retract_lift_below":[ "95" ], - "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", - "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00", "nozzle_type": "brass", "auxiliary_fan": "0" } \ No newline at end of file diff --git a/resources/profiles/Geeetech/machine/Geeetech M1 0.8 nozzle.json b/resources/profiles/Geeetech/machine/Geeetech M1 0.8 nozzle.json index 0505e1055..491d0fd2d 100644 --- a/resources/profiles/Geeetech/machine/Geeetech M1 0.8 nozzle.json +++ b/resources/profiles/Geeetech/machine/Geeetech M1 0.8 nozzle.json @@ -15,8 +15,8 @@ "0.8" ], "extruder_type": [ - "Direct" - ], + "Direct Drive" + ], "machine_max_acceleration_e": [ "2000", "2000" @@ -76,7 +76,7 @@ "machine_max_jerk_z": [ "3", "3" - ], + ], "max_layer_height": [ "0.14" ], @@ -91,7 +91,7 @@ ], "deretraction_speed": [ "40" - ], + ], "max_layer_height": [ "0.56" ], @@ -108,8 +108,8 @@ "retract_lift_below":[ "95" ], - "machine_start_gcode": ";Geeetech M1 official wiki URL for M1：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", - "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "machine_start_gcode": ";Geeetech M1 official wiki URL：https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00", "nozzle_type": "brass", "auxiliary_fan": "0" } \ No newline at end of file diff --git a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json index fadf44b54..7f21963b5 100644 --- a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json +++ b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json @@ -138,5 +138,4 @@ "support_multi_bed_types": "1", "auxiliary_fan": "0", "z_hop_types": "Normal Lift" - } diff --git a/resources/profiles/Geeetech/process/0.08mm Extra Fine @Geeetech M1.json b/resources/profiles/Geeetech/process/0.08mm Extra Fine @Geeetech M1.json index ae615d244..dec4d5444 100644 --- a/resources/profiles/Geeetech/process/0.08mm Extra Fine @Geeetech M1.json +++ b/resources/profiles/Geeetech/process/0.08mm Extra Fine @Geeetech M1.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_038", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "80", - "inner_wall_speed": "100", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "80", + "inner_wall_speed": "100", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.4 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.08mm Optimal @Geeetech M1 0.2 nozzle.json b/resources/profiles/Geeetech/process/0.08mm Optimal @Geeetech M1 0.2 nozzle.json index 594fc8012..a4c543276 100644 --- a/resources/profiles/Geeetech/process/0.08mm Optimal @Geeetech M1 0.2 nozzle.json +++ b/resources/profiles/Geeetech/process/0.08mm Optimal @Geeetech M1 0.2 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_039", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "100", - "inner_wall_speed": "150", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "100", + "inner_wall_speed": "150", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.2 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.10mm Fine @Geeetech M1.json b/resources/profiles/Geeetech/process/0.10mm Fine @Geeetech M1.json index 1efa2662e..a2936435f 100644 --- a/resources/profiles/Geeetech/process/0.10mm Fine @Geeetech M1.json +++ b/resources/profiles/Geeetech/process/0.10mm Fine @Geeetech M1.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_040", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "60", - "inner_wall_speed": "100", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "60", + "inner_wall_speed": "100", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.4 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.10mm Standard @Geeetech M1 0.2 nozzle.json b/resources/profiles/Geeetech/process/0.10mm Standard @Geeetech M1 0.2 nozzle.json index c4bad2826..1f4f85d03 100644 --- a/resources/profiles/Geeetech/process/0.10mm Standard @Geeetech M1 0.2 nozzle.json +++ b/resources/profiles/Geeetech/process/0.10mm Standard @Geeetech M1 0.2 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_041", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "100", - "inner_wall_speed": "120", - "sparse_infill_speed": "150", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "100", + "inner_wall_speed": "120", + "sparse_infill_speed": "150", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.2 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.12mm Draft @Geeetech M1 0.2 nozzle.json b/resources/profiles/Geeetech/process/0.12mm Draft @Geeetech M1 0.2 nozzle.json index 4b937acd8..3429a023b 100644 --- a/resources/profiles/Geeetech/process/0.12mm Draft @Geeetech M1 0.2 nozzle.json +++ b/resources/profiles/Geeetech/process/0.12mm Draft @Geeetech M1 0.2 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_042", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "80", - "inner_wall_speed": "120", - "sparse_infill_speed": "150", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "80", + "inner_wall_speed": "120", + "sparse_infill_speed": "150", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.2 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.14mm Extra Draft @Geeetech M1 0.2 nozzle.json b/resources/profiles/Geeetech/process/0.14mm Extra Draft @Geeetech M1 0.2 nozzle.json index 780a01e42..90b467804 100644 --- a/resources/profiles/Geeetech/process/0.14mm Extra Draft @Geeetech M1 0.2 nozzle.json +++ b/resources/profiles/Geeetech/process/0.14mm Extra Draft @Geeetech M1 0.2 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_043", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "80", - "inner_wall_speed": "120", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "80", + "inner_wall_speed": "120", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.2 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.16mm Optimal @Geeetech M1.json b/resources/profiles/Geeetech/process/0.16mm Optimal @Geeetech M1.json index 492fcd23d..b83094860 100644 --- a/resources/profiles/Geeetech/process/0.16mm Optimal @Geeetech M1.json +++ b/resources/profiles/Geeetech/process/0.16mm Optimal @Geeetech M1.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_044", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "60", - "inner_wall_speed": "100", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "60", + "inner_wall_speed": "100", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.4 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.20mm Standard @Geeetech M1.json b/resources/profiles/Geeetech/process/0.20mm Standard @Geeetech M1.json index b89706c69..c2527b022 100644 --- a/resources/profiles/Geeetech/process/0.20mm Standard @Geeetech M1.json +++ b/resources/profiles/Geeetech/process/0.20mm Standard @Geeetech M1.json @@ -12,22 +12,29 @@ "inner_wall_line_width": "0.40", "internal_solid_infill_line_width": "0.40", "support_line_width": "0.38", - "top_surface_line_width": "0.40", - "initial_layer_speed": "30", + "top_surface_line_width": "0.40", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "50", - "inner_wall_speed": "80", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "50", + "inner_wall_speed": "80", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.4 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json b/resources/profiles/Geeetech/process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json index 8d76f7583..59e1e6f9d 100644 --- a/resources/profiles/Geeetech/process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json +++ b/resources/profiles/Geeetech/process/0.24mm Optimal @Geeetech M1 0.6 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_045", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "50", - "inner_wall_speed": "80", - "sparse_infill_speed": "100", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "50", + "inner_wall_speed": "80", + "sparse_infill_speed": "100", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.6 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.25mm Draft @Geeetech M1.json b/resources/profiles/Geeetech/process/0.25mm Draft @Geeetech M1.json index 46dd14e7e..1abfa86a3 100644 --- a/resources/profiles/Geeetech/process/0.25mm Draft @Geeetech M1.json +++ b/resources/profiles/Geeetech/process/0.25mm Draft @Geeetech M1.json @@ -12,22 +12,29 @@ "inner_wall_line_width": "0.40", "internal_solid_infill_line_width": "0.40", "support_line_width": "0.38", - "top_surface_line_width": "0.40", - "initial_layer_speed": "30", + "top_surface_line_width": "0.40", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "50", - "inner_wall_speed": "80", - "sparse_infill_speed": "100", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "50", + "inner_wall_speed": "80", + "sparse_infill_speed": "100", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.4 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.30mm Standard @Geeetech M1 0.6 nozzle.json b/resources/profiles/Geeetech/process/0.30mm Standard @Geeetech M1 0.6 nozzle.json index 4ca4de951..4c0b0cf9e 100644 --- a/resources/profiles/Geeetech/process/0.30mm Standard @Geeetech M1 0.6 nozzle.json +++ b/resources/profiles/Geeetech/process/0.30mm Standard @Geeetech M1 0.6 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_048", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "100", - "inner_wall_speed": "150", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "100", + "inner_wall_speed": "150", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.6 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.36mm Draft @Geeetech M1 0.6 nozzle.json b/resources/profiles/Geeetech/process/0.36mm Draft @Geeetech M1 0.6 nozzle.json index efe67bed3..2ec0a1f6e 100644 --- a/resources/profiles/Geeetech/process/0.36mm Draft @Geeetech M1 0.6 nozzle.json +++ b/resources/profiles/Geeetech/process/0.36mm Draft @Geeetech M1 0.6 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_049", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "100", - "inner_wall_speed": "150", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "100", + "inner_wall_speed": "150", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.6 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.36mm Optimal @Geeetech M1 0.8 nozzle.json b/resources/profiles/Geeetech/process/0.36mm Optimal @Geeetech M1 0.8 nozzle.json index fed334ec7..d56a499e0 100644 --- a/resources/profiles/Geeetech/process/0.36mm Optimal @Geeetech M1 0.8 nozzle.json +++ b/resources/profiles/Geeetech/process/0.36mm Optimal @Geeetech M1 0.8 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_050", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "100", - "inner_wall_speed": "150", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "100", + "inner_wall_speed": "150", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.8 nozzle" ] diff --git a/resources/profiles/Geeetech/process/0.44mm Draft @Geeetech M1 0.8 nozzle.json b/resources/profiles/Geeetech/process/0.44mm Draft @Geeetech M1 0.8 nozzle.json index 9221f9f41..90f03d0c2 100644 --- a/resources/profiles/Geeetech/process/0.44mm Draft @Geeetech M1 0.8 nozzle.json +++ b/resources/profiles/Geeetech/process/0.44mm Draft @Geeetech M1 0.8 nozzle.json @@ -5,21 +5,28 @@ "from": "system", "setting_id": "GP_Geeetech_051", "instantiation": "true", - "initial_layer_speed": "30", + "initial_layer_speed": "30", "initial_layer_infill_speed": "50", - "outer_wall_speed": "100", - "inner_wall_speed": "150", - "sparse_infill_speed": "120", - "internal_solid_infill_speed":"100", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "travel_speed": "200", + "outer_wall_speed": "100", + "inner_wall_speed": "150", + "sparse_infill_speed": "120", + "internal_solid_infill_speed":"100", + "top_surface_speed": "50", + "gap_infill_speed": "80", + "travel_speed": "200", "default_acceleration": "2000", - "outer_wall_acceleration": "1500", - "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "3000", "initial_layer_acceleration": "500", - "top_surface_acceleration": "2000", + "top_surface_acceleration": "2000", "travel_acceleration": "3000", + "default_jerk": "10", + "initial_layer_jerk": "10", + "outer_wall_jerk": "10", + "infill_jerk": "10", + "travel_jerk": "10", + "inner_wall_jerk": "10", + "top_surface_jerk": "10", "compatible_printers": [ "Geeetech M1 0.8 nozzle" ] diff --git a/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.20.json b/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.20.json index eac0c76c8..a5d79fd99 100644 --- a/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.20.json +++ b/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.20.json @@ -5,7 +5,7 @@ "from": "system", "instantiation": "false", "layer_height": "0.20", - "wall_loops": "2", + "wall_loops": "2", "bottom_shell_layers": "5", "elefant_foot_compensation": "0.15", "top_shell_layers": "5", diff --git a/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.25.json b/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.25.json index 36f90fca5..a576c234a 100644 --- a/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.25.json +++ b/resources/profiles/Geeetech/process/fdm_process_Geeetech_HS_0.25.json @@ -5,8 +5,8 @@ "from": "system", "instantiation": "false", "layer_height": "0.25", - "wall_loops": "2", - "initial_layer_print_height": "0.3", + "wall_loops": "2", + "initial_layer_print_height": "0.3", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", "top_shell_thickness": "1.0",