diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json
index 615983e4c..5c01a9910 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json	
@@ -26,6 +26,12 @@
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
     "slow_down_layer_time": [
         "6"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json
index 4035f9e7f..1f8c8c5f2 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json	
@@ -26,6 +26,12 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
     "slow_down_layer_time": [
         "6"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json
index 486b8280f..464596188 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json	
@@ -24,6 +24,10 @@
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -44,6 +48,14 @@
         "2",
         "2"
     ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
@@ -92,32 +104,17 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_scarf_seam_type": [
-        "all"
-    ],
-    "filament_pre_cooling_temperature": [
-        "0",
-        "0"
-    ],
-    "filament_ramming_travel_time": [
-        "0",
-        "0"
-    ],
     "long_retractions_when_ec": [
         "1",
         "1"
     ],
     "nozzle_temperature": [
-        "210",
-        "210"
+        "220",
+        "220"
     ],
     "nozzle_temperature_initial_layer": [
-        "210",
-        "210"
+        "220",
+        "220"
     ],
     "pre_start_fan_time": [
         "2"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json
index b8c354198..4a3354d1c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json	
@@ -24,6 +24,10 @@
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -44,6 +48,14 @@
         "20",
         "30"
     ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
@@ -92,32 +104,17 @@
         "Spiral Lift",
         "Spiral Lift"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_scarf_seam_type": [
-        "all"
-    ],
-    "filament_pre_cooling_temperature": [
-        "0",
-        "0"
-    ],
-    "filament_ramming_travel_time": [
-        "0",
-        "0"
-    ],
     "long_retractions_when_ec": [
         "1",
         "1"
     ],
     "nozzle_temperature": [
-        "210",
-        "210"
+        "220",
+        "220"
     ],
     "nozzle_temperature_initial_layer": [
-        "210",
-        "210"
+        "220",
+        "220"
     ],
     "pre_start_fan_time": [
         "2"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json
index ec0b7e75d..aa350b4cc 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json	
@@ -14,12 +14,12 @@
     "counter_coef_3": [
         "-0.32"
     ],
-    "counter_limit_min": [
-        "-0.4"
-    ],
     "counter_limit_max": [
         "0.05"
     ],
+    "counter_limit_min": [
+        "-0.4"
+    ],
     "fan_max_speed": [
         "80"
     ],
@@ -36,6 +36,10 @@
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -56,6 +60,14 @@
         "20",
         "30"
     ],
+    "filament_pre_cooling_temperature": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
     "filament_ramming_volumetric_speed": [
         "-1",
         "-1"
@@ -104,21 +116,6 @@
         "Spiral Lift",
         "Spiral Lift"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_scarf_seam_type": [
-        "all"
-    ],
-    "filament_pre_cooling_temperature": [
-        "0",
-        "0"
-    ],
-    "filament_ramming_travel_time": [
-        "0",
-        "0"
-    ],
     "hole_coef_2": [
         "-0.0081"
     ],
@@ -127,12 +124,12 @@
         "1"
     ],
     "nozzle_temperature": [
-        "210",
-        "210"
+        "220",
+        "220"
     ],
     "nozzle_temperature_initial_layer": [
-        "210",
-        "210"
+        "220",
+        "220"
     ],
     "pre_start_fan_time": [
         "2"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json
index 00095d9bc..a8ba0ac50 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json	
@@ -23,6 +23,12 @@
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json
index 0a8cfac85..5273ee886 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json	
@@ -11,6 +11,12 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json
index 60eaf4f75..8458fc4cc 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json	
@@ -11,6 +11,12 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",