ENH: use empty filament start gcode for H2D

jira: NONE

Signed-off-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Change-Id: Ibbd1676762b9004ff8f7883b6df264cd1e9c7b58

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "02.00.00.81",
+    "version": "02.00.00.82",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json

@@ -25,6 +25,10 @@
         "2",
         "2"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json

@@ -25,6 +25,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json

@@ -25,6 +25,10 @@
         "16",
         "16"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -98,7 +98,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json

@@ -25,6 +25,10 @@
         "12",
         "12"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json

@@ -25,6 +25,10 @@
         "2",
         "2"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json

@@ -34,6 +34,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -82,10 +86,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -118,7 +118,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json

@@ -25,6 +25,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -98,7 +98,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json

@@ -25,6 +25,10 @@
         "12",
         "12"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json

@@ -24,6 +24,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -72,10 +76,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json

@@ -24,6 +24,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -72,10 +76,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json

@@ -25,6 +25,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json

@@ -34,6 +34,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -82,10 +86,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -108,7 +108,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json

@@ -25,6 +25,10 @@
         "10.5",
         "10.5"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json

@@ -34,6 +34,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -82,10 +86,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -108,7 +108,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json

@@ -24,6 +24,10 @@
         "1",
         "1"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -72,10 +76,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json

@@ -24,6 +24,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -72,10 +76,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json

@@ -24,6 +24,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -72,10 +76,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json

@@ -24,6 +24,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -72,10 +76,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json

@@ -27,6 +27,10 @@
         "1",
         "1"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -75,10 +79,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -102,7 +102,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json

@@ -27,6 +27,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -75,10 +79,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -102,7 +102,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json

@@ -27,6 +27,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -75,10 +79,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -102,7 +102,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json

@@ -27,6 +27,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -75,10 +79,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -102,7 +102,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json

@@ -31,6 +31,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -79,10 +83,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -114,7 +114,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json

@@ -104,7 +104,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json

@@ -111,7 +111,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json

@@ -129,7 +129,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json

@@ -112,7 +112,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json

@@ -100,7 +100,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json

@@ -100,7 +100,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json

@@ -107,7 +107,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json

@@ -39,6 +39,10 @@
         "11.5",
         "11.5"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -87,10 +91,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -123,7 +123,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json

@@ -30,6 +30,10 @@
         "11.5",
         "11.5"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -78,10 +82,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -106,7 +106,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json

@@ -25,6 +25,10 @@
         "6",
         "6"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -102,7 +102,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json

@@ -105,7 +105,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json

@@ -105,7 +105,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json

@@ -118,7 +118,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json

@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json

@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json

@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json

@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D 0.2 nozzle.json

@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json

@@ -98,7 +98,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json

@@ -114,7 +114,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json

@@ -114,7 +114,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json

@@ -130,7 +130,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json

@@ -98,7 +98,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json

@@ -105,7 +105,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json

@@ -105,7 +105,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json

@@ -124,7 +124,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json

@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json

@@ -103,7 +103,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json

@@ -123,7 +123,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json

@@ -109,7 +109,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json

@@ -111,7 +111,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json

@@ -98,7 +98,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json

@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json

@@ -116,7 +116,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json

@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.6 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json

@@ -30,6 +30,10 @@
         "15",
         "15"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -78,10 +82,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -108,7 +108,7 @@
         "Bambu Lab H2D 0.4 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json

@@ -21,6 +21,10 @@
         "18",
         "18"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -69,10 +73,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -94,7 +94,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json

@@ -25,6 +25,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json

@@ -24,6 +24,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -72,10 +76,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -98,7 +98,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json

@@ -34,6 +34,10 @@
         "6",
         "6"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -82,10 +86,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -108,7 +108,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.2 nozzle.json

@@ -22,6 +22,10 @@
         "1",
         "1"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -70,10 +74,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -94,7 +94,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json

@@ -22,6 +22,10 @@
         "6",
         "6"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -70,10 +74,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json

@@ -25,6 +25,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json

@@ -105,7 +105,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json

@@ -103,7 +103,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json

@@ -105,7 +105,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json

@@ -25,6 +25,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json

@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json

@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json

@@ -25,6 +25,10 @@
         "6",
         "6"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json

@@ -104,7 +104,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json

@@ -105,7 +105,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json

@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json

@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json

@@ -102,7 +102,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json

@@ -25,6 +25,10 @@
         "2",
         "2"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic ABS @BBL H2D.json

@@ -25,6 +25,10 @@
         "15",
         "15"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json

@@ -25,6 +25,10 @@
         "2",
         "2"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic ASA @BBL H2D.json

@@ -25,6 +25,10 @@
         "12",
         "12"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json

@@ -21,6 +21,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -69,10 +73,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -95,7 +95,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic EVA @BBL H2D.json

@@ -22,6 +22,10 @@
         "12",
         "12"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -70,10 +74,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json

@@ -21,6 +21,10 @@
         "0.5",
         "0.5"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -69,10 +73,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -93,7 +93,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json

@@ -21,6 +21,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -69,10 +73,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -95,7 +95,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic PA @BBL H2D.json

@@ -35,6 +35,10 @@
         "12",
         "12"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -83,10 +87,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -130,7 +130,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json

@@ -25,6 +25,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json

@@ -25,6 +25,10 @@
         "1",
         "1"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -97,7 +97,7 @@
         "Bambu Lab H2D 0.2 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic PC @BBL H2D.json

@@ -25,6 +25,10 @@
         "16",
         "16"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -73,10 +77,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -99,7 +99,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json

@@ -21,6 +21,10 @@
         "6",
         "6"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -69,10 +73,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -95,7 +95,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"

resources/profiles/BBL/filament/Generic PE @BBL H2D.json

@@ -22,6 +22,10 @@
         "8",
         "8"
     ],
+    "filament_ramming_volumetric_speed": [
+        "-1",
+        "-1"
+    ],
     "filament_retract_before_wipe": [
         "nil",
         "nil"
@@ -70,10 +74,6 @@
         "Direct Drive Standard",
         "Direct Drive High Flow"
     ],
-    "filament_ramming_volumetric_speed": [
-        "-1",
-        "-1"
-    ],
     "filament_pre_cooling_temperature": [
         "0",
         "0"
@@ -96,7 +96,7 @@
         "Bambu Lab H2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling"
+        "; filament start gcode\n"
     ],
     "filament_end_gcode": [
         "; filament end gcode \n"