diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index bee43c9b3..d6bd3d596 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -647,6 +647,9 @@ msgstr "" msgid "Choose one file (3mf):" msgstr "" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "" @@ -2504,6 +2507,18 @@ msgstr "" msgid "Update failed." msgstr "" +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "" @@ -4443,6 +4458,11 @@ msgstr "" msgid "Project downloaded %d%%" msgstr "" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "" @@ -5074,7 +5094,7 @@ msgstr "" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" +msgid "Click here if you can't connect to the printer" msgstr "" msgid "send completed" @@ -5636,6 +5656,19 @@ msgstr "" msgid "Detached" msgstr "" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, possible-boost-format +msgid "%1% Preset" +msgstr "" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "" @@ -5645,11 +5678,6 @@ msgstr[1] "" msgid "Are you sure to %1% the selected preset?" msgstr "" -#. TRN Remove/Delete -#, possible-boost-format -msgid "%1% Preset" -msgstr "" - msgid "All" msgstr "" @@ -6972,7 +7000,7 @@ msgstr "" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -7673,6 +7701,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 9942d9e66..4b01ee7a0 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -663,6 +663,9 @@ msgstr "Laden einer Modusansicht" msgid "Choose one file (3mf):" msgstr "Wählen Sie eine Datei (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Wählen Sie eine oder mehrere Dateien (3mf/step/stl/svg/obj/amf):" @@ -2741,6 +2744,18 @@ msgstr "Authentifizierung fehlgeschlagen." msgid "Update failed." msgstr "Update fehlgeschlagen." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Druckauftrag konnte nicht gestartet werden" @@ -4774,6 +4789,11 @@ msgstr "Projekt wird heruntergeladen..." msgid "Project downloaded %d%%" msgstr "Projekt heruntergeladen %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "Die ausgewählte Datei" @@ -5439,8 +5459,8 @@ msgstr "Druckbettnivellierung" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "Es kann keine Verbindung zum Drucker hergestellt werden" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "Senden abgeschlossen" @@ -6117,6 +6137,19 @@ msgstr "Rückzug bei Materialwechsel" msgid "Detached" msgstr "Losgelöst" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Profil" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "Das folgende Profil wird ebenfalls gelöscht." @@ -6126,11 +6159,6 @@ msgstr[1] "Die folgenden Profile werden ebenfalls gelöscht." msgid "Are you sure to %1% the selected preset?" msgstr "Sind sie sicher, dass sie das ausgewählte Profil %1% wollen?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Profil" - msgid "All" msgstr "Alle" @@ -7641,7 +7669,7 @@ msgstr "Standard Prozessprofil beim Wechsel zu diesem Maschinenprofil" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8457,6 +8485,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "Geschwindigkeit der inneren Füllung." +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Glätten-Typ" @@ -11009,6 +11049,9 @@ msgstr "" "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandlinien und " "eine höhere Dichte der Füllung verbessern können?" +#~ msgid "Can't connect to the printer" +#~ msgstr "Es kann keine Verbindung zum Drucker hergestellt werden" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index bffc87b3d..7fdfd6919 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -655,6 +655,9 @@ msgstr "Loading a mode view" msgid "Choose one file (3mf):" msgstr "Choose one file (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Choose one or more files (3mf/step/stl/svg/obj/amf):" @@ -2669,6 +2672,18 @@ msgstr "Verification failed." msgid "Update failed." msgstr "Update failed." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Failed to start print job" @@ -4671,6 +4686,11 @@ msgstr "downloading project ..." msgid "Project downloaded %d%%" msgstr "Project downloaded %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "The selected file" @@ -5326,8 +5346,8 @@ msgstr "Bed leveling" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "Can't connect to the printer" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "Send complete" @@ -5970,6 +5990,19 @@ msgstr "Retraction when switching material" msgid "Detached" msgstr "Detached" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Preset" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "The following preset will be deleted too:" @@ -5979,11 +6012,6 @@ msgstr[1] "The following presets will be deleted too:" msgid "Are you sure to %1% the selected preset?" msgstr "Are you sure you want to %1% the selected preset?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Preset" - msgid "All" msgstr "All" @@ -7449,7 +7477,7 @@ msgstr "Default process profile when switching to this machine profile" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8250,6 +8278,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "This is the speed for internal sparse infill." +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Ironing type" @@ -10752,6 +10792,9 @@ msgstr "" "Did you know that you can use more wall loops and higher sparse infill " "density to improve the strength of the model?" +#~ msgid "Can't connect to the printer" +#~ msgstr "Can't connect to the printer" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index 717302898..b2bb062fb 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -668,6 +668,9 @@ msgstr "Cargar un modo de vista" msgid "Choose one file (3mf):" msgstr "Elija un archivo (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Elija uno o más archivos (3mf/step/stl/svg/obj/amf):" @@ -2721,6 +2724,18 @@ msgstr "Verificación fallida." msgid "Update failed." msgstr "Actualización fallida." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "No se pudo iniciar la impresión" @@ -4740,6 +4755,11 @@ msgstr "descargando proyecto..." msgid "Project downloaded %d%%" msgstr "Proyecto %d%% descargado" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "El archivo seleccionado" @@ -5406,8 +5426,8 @@ msgstr "Nivelación de la cama" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "No se puede conectar a la impresora" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "envío completo" @@ -6070,6 +6090,19 @@ msgstr "Retracción al cambiar de material" msgid "Detached" msgstr "Separado" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Preestablecido" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "Los siguientes preajustes también se eliminarán" @@ -6079,11 +6112,6 @@ msgstr[1] "Los siguientes preajustes también se eliminarán." msgid "Are you sure to %1% the selected preset?" msgstr "¿Está seguro de %1% el preajuste seleccionado?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Preestablecido" - msgid "All" msgstr "Todo" @@ -7589,7 +7617,7 @@ msgstr "" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8402,6 +8430,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "Velocidad del relleno interno disperso" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Tipo de alisado" @@ -10937,6 +10977,9 @@ msgstr "" "¿Sabía que puede utilizar más bucles de pared y una densidad de relleno " "dispersa más alta para mejorar la resistencia del modelo?" +#~ msgid "Can't connect to the printer" +#~ msgstr "No se puede conectar a la impresora" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index 025ee4ae8..77b0ca04c 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -670,6 +670,9 @@ msgstr "Chargement d'une vue de mode" msgid "Choose one file (3mf):" msgstr "Choisissez un fichier (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Choisissez un ou plusieurs fichiers (3mf/step/stl/svg/obj/amf) :" @@ -2726,6 +2729,18 @@ msgstr "Échec de la vérification." msgid "Update failed." msgstr "Mise à jour a échoué." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Échec du lancement de la tâche d'impression" @@ -4751,6 +4766,11 @@ msgstr "téléchargement du projet..." msgid "Project downloaded %d%%" msgstr "Projet téléchargé à %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "Le fichier sélectionné" @@ -5423,8 +5443,8 @@ msgstr "Mise à niveau du lit" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "Impossible de se connecter à l'imprimante" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "envoi terminé" @@ -6107,6 +6127,19 @@ msgstr "Rétraction lors du changement de matériau" msgid "Detached" msgstr "Détaché" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Préréglage" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "Le préréglage suivant sera également supprimé." @@ -6116,11 +6149,6 @@ msgstr[1] "Les préréglages suivants seront également supprimés." msgid "Are you sure to %1% the selected preset?" msgstr "Êtes-vous sûr de %1% le préréglage sélectionné ?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Préréglage" - msgid "All" msgstr "Tous" @@ -7640,7 +7668,7 @@ msgstr "Profil de processus par défaut lors du passage à ce profil de machine" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8463,6 +8491,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "Vitesse de remplissage interne" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Type de lissage" @@ -11022,6 +11062,9 @@ msgstr "" "Saviez-vous que vous pouvez définir un plus grand nombre de périmètre et une " "densité de remplissage plus élevée pour améliorer la résistance du modèle ?" +#~ msgid "Can't connect to the printer" +#~ msgstr "Impossible de se connecter à l'imprimante" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index 2a4a56060..f6390a8c7 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -665,6 +665,9 @@ msgstr "Mód nézet betöltése" msgid "Choose one file (3mf):" msgstr "Válassz ki egy fájlt (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Válassz ki egy vagy több fájlt (3mf/step/stl/svg/obj/amf):" @@ -2703,6 +2706,18 @@ msgstr "Sikertelen ellenőrzés." msgid "Update failed." msgstr "A frissítés sikertelen." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Nem sikerült elindítani a nyomtatási feladatot" @@ -4714,6 +4729,11 @@ msgstr "projekt letöltése ..." msgid "Project downloaded %d%%" msgstr "Projekt letöltve %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "A kiválasztott fájl" @@ -5371,8 +5391,8 @@ msgstr "Asztalszintezés" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "Nem lehet csatlakozni a nyomtatóhoz" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "küldés befejezve" @@ -6029,6 +6049,19 @@ msgstr "Visszahúzás anyagváltáskor" msgid "Detached" msgstr "Különálló" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% beállítás" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "A következő beállítás szintén törlődni fog." @@ -6038,11 +6071,6 @@ msgstr[1] "A következő beállítások szintén törlődni fognak." msgid "Are you sure to %1% the selected preset?" msgstr "Biztos, hogy %1% a kiválasztott beállítást?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% beállítás" - msgid "All" msgstr "Összes" @@ -7536,7 +7564,7 @@ msgstr "Alapértelmezett folyamat profil, ha erre a gép profilra váltasz" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8345,6 +8373,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "A belső ritkás kitöltés sebessége" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Vasalás típusa" @@ -10869,6 +10909,9 @@ msgstr "" "Tudtad, hogy több fal vagy nagyobb kitöltés használatával javíthatod a " "modell szilárdságát?" +#~ msgid "Can't connect to the printer" +#~ msgstr "Nem lehet csatlakozni a nyomtatóhoz" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 0cae1df54..abb89f464 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -661,6 +661,9 @@ msgstr "Caricamento di una modalità di visualizzazione" msgid "Choose one file (3mf):" msgstr "Scegli file (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Scegli uno o più file (3mf/step/stl/svg/obj/amf):" @@ -2717,6 +2720,18 @@ msgstr "Verifica fallita." msgid "Update failed." msgstr "Aggiornamento fallito" +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Impossibile avviare il processo di stampa" @@ -4732,6 +4747,11 @@ msgstr "Download progetto..." msgid "Project downloaded %d%%" msgstr "Progetto scaricato %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "Il file selezionato" @@ -5393,8 +5413,8 @@ msgstr "Livellamento piano" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "Impossibile connettersi alla stampante" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "Invio completo" @@ -6055,6 +6075,19 @@ msgstr "Retrazione quando si cambia materiale" msgid "Detached" msgstr "Distaccato" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Preset" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "Verrà eliminato anche il seguente preset:" @@ -6064,11 +6097,6 @@ msgstr[1] "Verranno eliminati anche i seguenti presets:" msgid "Are you sure to %1% the selected preset?" msgstr "Sei sicuro di voler %1% il preset selezionato?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Preset" - msgid "All" msgstr "Tutto" @@ -7577,7 +7605,7 @@ msgstr "" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8398,6 +8426,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "E' la velocità del riempimento interno." +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Tipo di stiratura" @@ -10941,6 +10981,9 @@ msgstr "" "Sapevate che è possibile utilizzare un maggior numero di anelli a parete e " "una maggiore densità riempimento per migliorare la resistenza del modello?" +#~ msgid "Can't connect to the printer" +#~ msgstr "Impossibile connettersi alla stampante" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 94eca5e28..ceb08adfd 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -650,6 +650,9 @@ msgstr "モードビューをロード" msgid "Choose one file (3mf):" msgstr "ファイルを選択 (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "ファイルを選択 (3mf/step/stl/svg/obj/amf)" @@ -2608,6 +2611,18 @@ msgstr "認証失敗" msgid "Update failed." msgstr "更新が失敗しました。" +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "造形タスクを開始できませんでした" @@ -4588,6 +4603,11 @@ msgstr "プロジェクトをダウンロード中" msgid "Project downloaded %d%%" msgstr "プロジェクトをダウンロード %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "選択したファイル" @@ -5234,8 +5254,8 @@ msgstr "ベッドレベリング" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "プリンターに接続できない" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "送信完了" @@ -5850,6 +5870,18 @@ msgstr "素材変更時のリトラクション" msgid "Detached" msgstr "分離的" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% プリセット" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "以下のプリセットも削除されます: " @@ -5858,11 +5890,6 @@ msgstr[0] "以下のプリセットも削除されます: " msgid "Are you sure to %1% the selected preset?" msgstr "選択したプリセットを %1% しますか?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% プリセット" - msgid "All" msgstr "すべて" @@ -7267,7 +7294,7 @@ msgstr "デバイスを切替える時のデフォルト プロセス プロフ msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8028,6 +8055,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "スパース インフィルの造形速度です。" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "アイロン面" @@ -10434,6 +10473,9 @@ msgstr "" "強度の向上\n" "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。" +#~ msgid "Can't connect to the printer" +#~ msgstr "プリンターに接続できない" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index ed5977a36..a271d95e6 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -654,6 +654,9 @@ msgstr "모드 뷰 로드" msgid "Choose one file (3mf):" msgstr "하나의 파일 선택(3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "하나 이상의 파일을 선택합니다 (3mf/step/stl/svg/obj/amf):" @@ -2642,6 +2645,18 @@ msgstr "인증 실패" msgid "Update failed." msgstr "업데이트 실패" +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "출력 작업을 시작하지 못했습니다." @@ -4637,6 +4652,11 @@ msgstr "프로젝트 다운로드 중..." msgid "Project downloaded %d%%" msgstr "프로젝트 다운로드 %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "선택한 파일" @@ -5286,8 +5306,8 @@ msgstr "베드 레벨링" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "프린터에 연결할 수 없습니다" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "보내기 완료" @@ -5912,6 +5932,18 @@ msgstr "필라멘트 전환시 리트렉션" msgid "Detached" msgstr "분리됨" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% 프리셋" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "다음 프리셋도 삭제됩니다." @@ -5920,11 +5952,6 @@ msgstr[0] "다음 프리셋도 삭제됩니다." msgid "Are you sure to %1% the selected preset?" msgstr "선택한 프리셋의 %1% 를 정말로 원하십니까?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% 프리셋" - msgid "All" msgstr "전체" @@ -7360,7 +7387,7 @@ msgstr "이 프린터 프로파일로 전환할 때의 기본 프로세스 프 msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8136,6 +8163,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "내부채움 속도입니다." +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "다림질 유형" @@ -10595,6 +10634,9 @@ msgstr "" "더 많은 벽 루프와 더 높은 내부채움 밀도를 사용하여 모델의 강도를 높일 수 있다" "는 사실을 알고 계셨습니까?" +#~ msgid "Can't connect to the printer" +#~ msgstr "프린터에 연결할 수 없습니다" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index 3f94f3ebf..ba7641d19 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -660,6 +660,9 @@ msgstr "Een modusweergave laden" msgid "Choose one file (3mf):" msgstr "Kies een bestand (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Kies een of meer bestanden (3mf/step/stl/svg/obj/amf):" @@ -2717,6 +2720,18 @@ msgstr "Verificatie mislukt." msgid "Update failed." msgstr "Updaten mislukt." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Het starten van de printopdracht is mislukt" @@ -4746,6 +4761,11 @@ msgstr "project downloaden..." msgid "Project downloaded %d%%" msgstr "Project %d%% gedownload" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "Het geselecteerde bestand" @@ -5416,8 +5436,8 @@ msgstr "Bed leveling" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "Kan geen verbinding maken met de printer" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "Versturen gelukt" @@ -6081,6 +6101,19 @@ msgstr "Terugtrekken (retraction) bij het wisselen van filament" msgid "Detached" msgstr "Losgemaakt" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Voorinstelling" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "De volgende voorinstelling zal ook verwijderd worden@" @@ -6090,11 +6123,6 @@ msgstr[1] "De volgende voorinstelling zal ook verwijderd worden@" msgid "Are you sure to %1% the selected preset?" msgstr "Weet u zeker dat u de geselecteerde preset wilt %1%?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Voorinstelling" - msgid "All" msgstr "Alles" @@ -7600,7 +7628,7 @@ msgstr "Standaard procesprofiel bij het overschakelen naar dit machineprofiel" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8418,6 +8446,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "Dit is de snelheid voor de dunne vulling (infill)" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Strijk type" @@ -10962,6 +11002,9 @@ msgstr "" "Wist je dat je meer wandlussen en een hogere dunne invuldichtheid kunt " "gebruiken om de sterkte van het model te verbeteren?" +#~ msgid "Can't connect to the printer" +#~ msgstr "Kan geen verbinding maken met de printer" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index 2a884f610..9687d7510 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "PO-Revision-Date: 2023-08-11 09:11+0800\n" "Last-Translator: \n" "Language-Team: \n" @@ -659,6 +659,9 @@ msgstr "Загрузка режима просмотра" msgid "Choose one file (3mf):" msgstr "Выберите один файл (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Выберите один или несколько файлов (3mf/step/stl/svg/obj/amf):" @@ -2703,6 +2706,18 @@ msgstr "Проверка не удалась." msgid "Update failed." msgstr "Не удалось обновить." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Не удалось запустить задание на печать" @@ -4730,6 +4745,11 @@ msgstr "скачиваю проект..." msgid "Project downloaded %d%%" msgstr "Проект загружен %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "Выбранный файл" @@ -5378,7 +5398,7 @@ msgstr "Выравнивание кровати" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" +msgid "Click here if you can't connect to the printer" msgstr "" msgid "send completed" @@ -6020,6 +6040,20 @@ msgstr "Втягивание при переключении материала" msgid "Detached" msgstr "Отдельный" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" +msgstr[2] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Предустановка" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "Следующая предустановка также будет удалена." @@ -6030,11 +6064,6 @@ msgstr[2] "Следующие стили также будут удалены." msgid "Are you sure to %1% the selected preset?" msgstr "Вы уверены, что %1% выбранной предустановки?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Предустановка" - msgid "All" msgstr "Всё" @@ -7510,7 +7539,7 @@ msgstr "Профиль процесса по умолчанию при пере msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8307,6 +8336,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "Скорость внутреннего заполнения" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Тип глажки" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index cd453e228..692136460 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -656,6 +656,9 @@ msgstr "Laddar modell vy" msgid "Choose one file (3mf):" msgstr "Välj en fil (3mf):" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Välj en eller flera filer (3mf/step/stl/svg/obj/amf):" @@ -2686,6 +2689,18 @@ msgstr "Verifikation misslyckade." msgid "Update failed." msgstr "Uppdatering misslyckades." +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "Det gick inte att starta utskriftsjobbet" @@ -4692,6 +4707,11 @@ msgstr "laddar ner projekt ..." msgid "Project downloaded %d%%" msgstr "Projektet har laddats ned %d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "Den valda filen" @@ -5343,8 +5363,8 @@ msgstr "Justering av Byggplattan" msgid "Flow Dynamics Calibration" msgstr "" -msgid "Can't connect to the printer" -msgstr "Kan inte ansluta till skrivaren" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "Skicka komplett" @@ -5997,6 +6017,19 @@ msgstr "Reduktion vid material byte" msgid "Detached" msgstr "Fristående" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" +msgstr[1] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% Förinställning" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "" @@ -6010,11 +6043,6 @@ msgstr[1] "" msgid "Are you sure to %1% the selected preset?" msgstr "Välja %1% den valda förinställningen?" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% Förinställning" - msgid "All" msgstr "Allt" @@ -7466,7 +7494,7 @@ msgstr "Standard process profil vid byte till denna maskinens profil" msgid "Activate air filtration" msgstr "" -msgid "Acivate for better air filtration" +msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" @@ -8269,6 +8297,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "Hastighet för sparsam ifyllnad" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "Stryknings typ" @@ -10777,6 +10817,9 @@ msgstr "" "Visste du att du kan använda fler väggslingor och högre gles fyllningstäthet " "för att förbättra modellens styrka?" +#~ msgid "Can't connect to the printer" +#~ msgstr "Kan inte ansluta till skrivaren" + #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial " diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index d1322fb31..60072b058 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-01 10:49+0800\n" +"POT-Creation-Date: 2023-09-07 20:48+0800\n" "PO-Revision-Date: 2023-07-07 09:45+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -195,7 +195,7 @@ msgid "Tool-Lay on Face" msgstr "工具-选择底面" msgid "Bottom:" -msgstr "" +msgstr "底边:" msgid "in" msgstr "在" @@ -654,6 +654,9 @@ msgstr "加载模式视图" msgid "Choose one file (3mf):" msgstr "选择一个文件（3mf）：" +msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" + msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "选择一个或多个文件（3mf/step/stl/svg/obj/amf）：" @@ -2583,6 +2586,18 @@ msgstr "验证失败。" msgid "Update failed." msgstr "更新失败。" +msgid "" +"The current chamber temperature or the target chamber temperature exceeds " +"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/" +"TPU) is not allowed to be loaded." +msgstr "" + +msgid "" +"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to " +"avoid extruder clogging,it is not allowed to set the chamber temperature " +"above 45℃." +msgstr "" + msgid "Failed to start printing job" msgstr "发起打印任务失败" @@ -4553,6 +4568,11 @@ msgstr "项目下载中..." msgid "Project downloaded %d%%" msgstr "项目已下载%d%%" +msgid "" +"Importing to Bambu Studio failed. Please download the file and manually " +"import it." +msgstr "" + msgid "The selected file" msgstr "已选择的文件" @@ -5190,8 +5210,8 @@ msgstr "热床调平" msgid "Flow Dynamics Calibration" msgstr "动态流量校准" -msgid "Can't connect to the printer" -msgstr "无法连接打印机" +msgid "Click here if you can't connect to the printer" +msgstr "" msgid "send completed" msgstr "发送完成" @@ -5793,6 +5813,18 @@ msgstr "切换材料时的回抽量" msgid "Detached" msgstr "分离的" +msgid "Presets inherited by other presets cannot be deleted" +msgstr "" + +msgid "The following presets inherits this preset." +msgid_plural "The following preset inherits this preset." +msgstr[0] "" + +#. TRN Remove/Delete +#, boost-format +msgid "%1% Preset" +msgstr "%1% 预设" + msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "下列预设将被一起删除。" @@ -5801,11 +5833,6 @@ msgstr[0] "下列预设将被一起删除。" msgid "Are you sure to %1% the selected preset?" msgstr "确定要%1%所选预设吗？" -#. TRN Remove/Delete -#, boost-format -msgid "%1% Preset" -msgstr "%1% 预设" - msgid "All" msgstr "所有" @@ -7175,10 +7202,10 @@ msgid "Default process profile when switch to this machine profile" msgstr "该机器的默认切片配置" msgid "Activate air filtration" -msgstr "" +msgstr "激活空气过滤" -msgid "Acivate for better air filtration" -msgstr "" +msgid "Activate for better air filtration" +msgstr "激活以达到更好的空气过滤" msgid "Fan speed" msgstr "风扇速度" @@ -7917,6 +7944,18 @@ msgstr "" msgid "Speed of internal sparse infill" msgstr "内部稀疏填充的打印速度" +msgid "Maximum width of a segmented region" +msgstr "" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "" + +msgid "Interlocking depth of a segmented region" +msgstr "" + +msgid "Interlocking depth of a segmented region. Zero disables this feature." +msgstr "" + msgid "Ironing Type" msgstr "熨烫类型" @@ -10352,6 +10391,9 @@ msgstr "" "提高强度\n" "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。" +#~ msgid "Can't connect to the printer" +#~ msgstr "无法连接打印机" + #~ msgid "Motor noise" #~ msgstr "电机降噪" diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo index f9177288b..9360c17d5 100644 Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo index a973752aa..9edbd795b 100644 Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo index fe83fbbc1..ff82eb179 100644 Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo index d51bf9b1c..ff21f8ddb 100644 Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo index b33ffb6b8..7b879ca0d 100644 Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo index 0a651f14b..804bcf4c3 100644 Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ diff --git a/resources/i18n/ja/BambuStudio.mo b/resources/i18n/ja/BambuStudio.mo index 6c70ee6f0..f133a5bf2 100644 Binary files a/resources/i18n/ja/BambuStudio.mo and b/resources/i18n/ja/BambuStudio.mo differ diff --git a/resources/i18n/ko/BambuStudio.mo b/resources/i18n/ko/BambuStudio.mo index c7f082d7f..166de15df 100644 Binary files a/resources/i18n/ko/BambuStudio.mo and b/resources/i18n/ko/BambuStudio.mo differ diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo index 3ada35a59..5b430c774 100644 Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo index 4a09130bc..bb812d4b0 100644 Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 1feddfced..e23046bf3 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ