ENH: add description in profiles

1. Add profiles in process profile

jira:NEW

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8d1f20aaae08c2dbc69926258384c2b7de0021ad

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.08.00.26",
+    "version": "01.08.00.27",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [

resources/profiles/BBL/process/0.06mm Fine @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP084",
     "instantiation": "true",
+    "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP050",
     "instantiation": "true",
+    "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
     "default_acceleration": "6000",
     "initial_layer_infill_speed": "28",
     "initial_layer_speed": "16",

resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP063",
     "instantiation": "true",
+    "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
     "default_acceleration": "5000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2500",

resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP118",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP117",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "3000",
     "initial_layer_infill_speed": "28",
     "initial_layer_speed": "16",

resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP116",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",

resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP115",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",

resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP024",
     "instantiation": "true",
+    "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",

resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP076",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP049",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP018",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle"
     ]

resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP001",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP119",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP102",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.075",
     "gap_infill_speed": "210",

resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP120",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "3000",
     "initial_layer_infill_speed": "28",
     "initial_layer_speed": "16",

resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP101",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "3000",
     "elefant_foot_compensation": "0",
     "gap_infill_speed": "210",

resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP121",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",

resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP100",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.15",
     "gap_infill_speed": "210",

resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP122",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",

resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP099",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "gap_infill_speed": "210",
     "inner_wall_speed": "120",

resources/profiles/BBL/process/0.08mm Optimal @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP085",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP051",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
     "default_acceleration": "6000",
     "initial_layer_infill_speed": "28",
     "initial_layer_speed": "16",

resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP064",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
     "default_acceleration": "5000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2500",

resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP025",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",

resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP114",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP113",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
     "default_acceleration": "3000",
     "elefant_foot_compensation": "0",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP112",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",

resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP111",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2000",

resources/profiles/BBL/process/0.10mm Standard @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP083",
     "instantiation": "true",
+    "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP039",
     "instantiation": "true",
+    "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP014",
     "instantiation": "true",
+    "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab P1P 0.2 nozzle"

resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP007",
     "instantiation": "true",
+    "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",

resources/profiles/BBL/process/0.12mm Draft @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP086",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP052",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
     "default_acceleration": "6000",
     "initial_layer_infill_speed": "28",
     "initial_layer_speed": "16",

resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP065",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
     "default_acceleration": "5000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2500",

resources/profiles/BBL/process/0.12mm Fine @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP077",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP044",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP019",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle"
     ]

resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP002",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP106",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.075",
     "gap_infill_speed": "230",

resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP105",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "3000",
     "elefant_foot_compensation": "0",
     "gap_infill_speed": "230",

resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP104",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "gap_infill_speed": "230",
     "inner_wall_speed": "150",

resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP103",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "gap_infill_speed": "230",
     "inner_wall_speed": "150",

resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP026",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",

resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP087",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "initial_layer_infill_speed": "28",

resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP053",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
     "default_acceleration": "6000",
     "initial_layer_infill_speed": "28",
     "initial_layer_speed": "16",

resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP066",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
     "default_acceleration": "5000",
     "elefant_foot_compensation": "0.15",
     "outer_wall_acceleration": "2500",

resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP027",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",

resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP110",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "elefant_foot_compensation": "0.075",
     "gap_infill_speed": "250",

resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP109",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "3000",
     "elefant_foot_compensation": "0",
     "gap_infill_speed": "250",

resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP108",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "gap_infill_speed": "250",
     "inner_wall_speed": "150",

resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP107",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
     "default_acceleration": "4000",
     "gap_infill_speed": "250",
     "inner_wall_speed": "150",

resources/profiles/BBL/process/0.16mm Optimal @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP078",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP045",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP020",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle"
     ]

resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP003",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.18mm Fine @BBL A1 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP088",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP062",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP072",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab P1P 0.6 nozzle"

resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP028",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",

resources/profiles/BBL/process/0.20mm Standard @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP079",
     "instantiation": "true",
+    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP000",
     "instantiation": "true",
+    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP015",
     "instantiation": "true",
+    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle"
     ]

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP004",
     "instantiation": "true",
+    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.20mm Strength @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP080",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "outer_wall_speed": "60",

resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP046",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP021",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "outer_wall_speed": "60",
     "sparse_infill_density": "25%",
     "wall_loops": "6",

resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json

@@ -5,9 +5,10 @@
     "from": "system",
     "setting_id": "GP013",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "outer_wall_speed": "60",
-    "wall_loops": "6",
     "sparse_infill_density": "25%",
+    "wall_loops": "6",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.24mm Draft @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP081",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP047",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP022",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle"
     ]

resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP005",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.24mm Fine @BBL A1 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP092",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP057",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP068",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab P1P 0.8 nozzle"

resources/profiles/BBL/process/0.24mm Optimal @BBL A1 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP089",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP054",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
     "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP069",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab P1P 0.6 nozzle"

resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP029",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",

resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP032",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",

resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP082",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP048",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP023",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle"
     ]

resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP006",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/process/0.30mm Standard @BBL A1 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP096",
     "instantiation": "true",
+    "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP038",
     "instantiation": "true",
+    "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0",
     "travel_speed": "700",

resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP016",
     "instantiation": "true",
+    "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab P1P 0.6 nozzle"

resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP011",
     "instantiation": "true",
+    "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 0.6 nozzle"

resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP010",
     "instantiation": "true",
+    "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",

resources/profiles/BBL/process/0.30mm Strength @BBL A1 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP097",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "sparse_infill_density": "25%",

resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP061",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP067",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "elefant_foot_compensation": "0.15",
     "sparse_infill_density": "25%",
     "wall_loops": "4",

resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP036",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "elefant_foot_compensation": "0.15",
     "sparse_infill_density": "25%",
     "wall_loops": "4",

resources/profiles/BBL/process/0.32mm Optimal @BBL A1 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP093",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP058",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [

resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP075",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab P1P 0.8 nozzle"

resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP033",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",

resources/profiles/BBL/process/0.36mm Draft @BBL A1 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP090",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
     "default_acceleration": "6000",
     "elefant_foot_compensation": "0.075",
     "travel_speed": "700",

resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json

@@ -5,6 +5,7 @@
     "from": "system",
     "setting_id": "GP055",
     "instantiation": "true",
+    "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
     "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [