diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index dd84d1a90..b15b5482e 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -3373,6 +3373,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr ""
 
diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po
index 20d71584b..c10851f35 100644
--- a/bbl/i18n/cs/BambuStudio_cs.po
+++ b/bbl/i18n/cs/BambuStudio_cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: 2023-10-18 10:45+0800\n"
 "Last-Translator: René Mošner <renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -3421,6 +3421,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr ""
 
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index 3c8de5b4f..4949a9ac4 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3457,6 +3457,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "Die aktuelle Kammertemperatur oder die Zielkammertemperatur überschreitet 45℃. Um ein Verstopfen des Extruders zu vermeiden, darf kein Filament mit niedriger Temperatur (PLA/PETG/TPU) geladen werden."
 
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index 3f7631ec5..c7feb6775 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -3440,6 +3440,9 @@ msgstr "Timelapse is not supported when storage is unavailable."
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/TPU) is not allowed to be loaded."
 
@@ -6067,12 +6070,16 @@ msgid ""
 "The currently connected printer '%s', is a %s model.\n"
 "To use this printer for printing, please switch the printer model of project file to %s."
 msgstr ""
+"The currently connected printer '%s' is a %s model.\n"
+"To use this printer for printing, please switch the printer model of project file to %s."
 
 #, c-format, boost-format
 msgid ""
 "The currently connected printer '%s', is a %s model but not consistent with preset in project file.\n"
 "To use this printer for printing, please switch the preset first."
 msgstr ""
+"The currently connected printer '%s' is a %s model but not consistent with preset in project file.\n"
+"To use this printer for printing, please switch the preset first."
 
 msgid "Switch now"
 msgstr ""
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index deb870b3a..b5c43e0e6 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3459,6 +3459,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "La temperatura actual de la cámara o la temperatura objetivo de la cámara supera los 45 ℃. Para evitar que la extrusora se obstruya, no se permite cargar filamentos a baja temperatura (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index 067f44a60..d06a1dffa 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3450,6 +3450,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "La température actuelle du caisson ou sa température cible dépasse 45 ℃. Afin d'éviter de boucher l'extrudeur, le chargement de filaments à basse température (PLA/PETG/TPU) n'est pas autorisé."
 
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index 7b3d8d5c6..645d57e00 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3459,6 +3459,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "A kamra aktuális hőmérséklete vagy a kamra célhőmérséklete meghaladja a 45 ℃-ot. Az extruder eltömődésének elkerülése érdekében ne tölts be alacsony hőmérsékletű filamentet (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po
index 6c86574e3..f62f8c1e4 100644
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3462,6 +3462,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "La temperatura attuale della camera o la temperatura target supera i 45℃. Per evitare l'intasamento dell'estrusore, non è consentito caricare filamenti a bassa temperatura (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po
index c4f764684..a7a5d460f 100644
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3446,6 +3446,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "現在のチャンバー温度または目標チャンバー温度が45℃を超えています。押出機の目詰まりを避けるため、低温フィラメント（PLA/PETG/TPU）は装填できません。"
 
diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po
index 935ce7666..7a389026f 100644
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3454,6 +3454,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "현재 챔버 온도 또는 목표 챔버 온도가 45℃를 초과합니다. 압출기 막힘을 방지하기 위해 저온 필라멘트(PLA/PETG/TPU)는 로드할 수 없습니다."
 
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index 43273e637..1ccfadec2 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3459,6 +3459,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "De huidige kamertemperatuur of de gewenste kamertemperatuur is hoger dan 45℃. Om verstopping van de extruder te voorkomen, is het niet toegestaan filament met een lage temperatuur (PLA/PETG/TPU) te laden."
 
diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po
index eda152d77..add75075b 100644
--- a/bbl/i18n/pl/BambuStudio_pl.po
+++ b/bbl/i18n/pl/BambuStudio_pl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3465,6 +3465,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "Aktualna temperatura komory lub docelowa temperatura komory przekracza 45℃. Aby uniknąć zatkania ekstrudera, nie wolno ładować niskotemperaturowego filamentu (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
index 3ac0f76fe..12490c4fc 100644
--- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
+++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3465,6 +3465,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "A temperatura atual da câmara ou a temperatura alvo da câmara excede 45 ℃. Para evitar o entupimento da extrusora, não é permitido carregar filamentos de baixa temperatura (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po
index 734a27503..dc101a8e5 100644
--- a/bbl/i18n/ru/BambuStudio_ru.po
+++ b/bbl/i18n/ru/BambuStudio_ru.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio 2.0.2 Public Release\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: 2025-04-22 16:37+0700\n"
 "Last-Translator: \n"
 "Language-Team: Andylg <andylg@yandex.ru>\n"
@@ -3572,6 +3572,9 @@ msgstr "Нельзя включить таймлапс, т.к. отсутств
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr "Нельзя включить таймлапс, т.к. SD-карта доступна только для чтения."
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "Текущая температура или целевая температура внутри термокамеры превышает 45℃. Чтобы избежать засорения экструдера, запрещается загрузка низкотемпературной печатной нити (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index dc1f54fb0..f9637955b 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -3459,6 +3459,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "Den aktuella kammar temperaturen eller den önskade kammar temperaturen överstiger 45 ℃. För att undvika igensättning av extrudern är det inte tillåtet att ladda filament med låg temperatur (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po
index 7b852ef8f..4f68bd3ca 100644
--- a/bbl/i18n/tr/BambuStudio_tr.po
+++ b/bbl/i18n/tr/BambuStudio_tr.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: 2025-05-08 12:48+0300\n"
 "Last-Translator: Fatih AYDIN <fatihaydin5228@gmail.com>\n"
 "Language-Team: \n"
@@ -3482,6 +3482,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "Mevcut hazne sıcaklığı veya hedef hazne sıcaklığı 45 ° C'yi aşıyor Ekstruder tıkanmasını önlemek için düşük sıcaklıkta filament (PLA / PETG / TPU) yüklenmesine izin verilmez."
 
diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po
index c58b8d702..ae0ab2a83 100644
--- a/bbl/i18n/uk/BambuStudio_uk.po
+++ b/bbl/i18n/uk/BambuStudio_uk.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: BambuLab Україна\n"
@@ -3467,6 +3467,9 @@ msgstr ""
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr ""
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "Поточна температура камери або цільова температура камери перевищує 45℃. Щоб уникнути забивання екструдера, не дозволяється завантажувати філаменти низької температури (PLA/PETG/TPU)."
 
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index bb90740ed..9417439d0 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-05-26 21:31+0800\n"
+"POT-Creation-Date: 2025-05-28 14:42+0800\n"
 "PO-Revision-Date: 2025-02-20 20:32+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -3450,6 +3450,9 @@ msgstr "存储介质不可用，故无法启用延时摄影"
 msgid "Timelapse is not supported while the storage is readonly."
 msgstr "存储介质当前是只读的，故无法启用延时摄影"
 
+msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer."
+msgstr ""
+
 msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded."
 msgstr "当前腔温或目标腔温超过了45℃。为了避免挤出机堵塞，不允许加载低温度的打印材料（如PLA/PETG/TPU）"
 
@@ -6079,12 +6082,16 @@ msgid ""
 "The currently connected printer '%s', is a %s model.\n"
 "To use this printer for printing, please switch the printer model of project file to %s."
 msgstr ""
+"当前连接的打印机 \"%s\" 为 %s机型。\n"
+"如果使用该打印机打印，请将项目文件中的机型切换为 %s。"
 
 #, c-format, boost-format
 msgid ""
 "The currently connected printer '%s', is a %s model but not consistent with preset in project file.\n"
 "To use this printer for printing, please switch the preset first."
 msgstr ""
+"当前连接的打印机 \"%s\"是%s型号，但与项目文件中的预设不一致。\n"
+"若要使用此打印机进行打印，请先切换预设。"
 
 msgid "Switch now"
 msgstr "现在切换"
@@ -7399,6 +7406,9 @@ msgid ""
 "0 top z distance, 0 interface spacing, interlaced rectilinear pattern, disable independent support layer height \n"
 "and use soluble materials for both support interface and support base"
 msgstr ""
+"当使用可溶性材料作为支撑时，我们推荐以下设置：\n"
+"0顶层z距离，0接触层间距，交叠直线图案，禁用独立支撑层高\n"
+"并将可溶性材料同时用于支撑界面和支撑主体"
 
 msgid ""
 "Change these settings automatically? \n"
diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo
index ff69bb7ba..f828c7fdb 100644
Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ
diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo
index 7627168fe..e2e6853fa 100644
Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ