diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 32c2607c8..56ea17d50 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1211,8 +1211,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" #, possible-c-format, possible-boost-format @@ -1683,7 +1683,7 @@ msgstr "" msgid "Edit" msgstr "" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2218,9 +2218,9 @@ msgid "Top" msgstr "" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3092,9 +3092,9 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" msgid "" @@ -3702,9 +3702,9 @@ msgid "Switch to normal mode" msgstr "" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -3915,6 +3915,12 @@ msgstr "" msgid "Size:" msgstr "" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, possible-c-format, possible-boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -3931,9 +3937,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "" #, possible-c-format, possible-boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, possible-c-format, possible-boost-format @@ -5506,7 +5510,7 @@ msgid "Printer settings" msgstr "" #, possible-c-format, possible-boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, possible-boost-format @@ -5635,6 +5639,9 @@ msgid "" "update to system presets." msgstr "" +msgid "Sync filaments with AMS successfully." +msgstr "" + #, possible-boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "" @@ -5766,15 +5773,12 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6459,10 +6463,7 @@ msgstr "" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7293,8 +7294,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "" @@ -8814,6 +8815,9 @@ msgstr "" msgid "Generating G-code" msgstr "" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "" @@ -8870,8 +8874,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" msgid "Device UI" @@ -9080,10 +9084,10 @@ msgstr "" #, possible-c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9798,8 +9802,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" msgid "mm/s² or %" @@ -12392,8 +12396,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" @@ -12753,8 +12757,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, possible-c-format, possible-boost-format @@ -13333,7 +13337,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -13352,32 +13356,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index 0f10b8633..40cfad6ac 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -1224,8 +1224,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Připojení %s selhalo! [SN:%s, kód=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" #, c-format, boost-format @@ -1699,7 +1699,7 @@ msgstr "Automaticky orientovat objekt pro zlepšení kvality tisku." msgid "Edit" msgstr "Upravit" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2247,9 +2247,9 @@ msgid "Top" msgstr "Shora" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3206,9 +3206,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" msgid "" @@ -3850,9 +3850,9 @@ msgid "Switch to normal mode" msgstr "Přepnout do normálního režimu" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4066,6 +4066,12 @@ msgstr "Objem:" msgid "Size:" msgstr "Velikost:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4084,9 +4090,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Cesta G-kódu přesahuje hranici podložky." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5693,7 +5697,7 @@ msgid "Printer settings" msgstr "Nastavení tiskárny" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5827,6 +5831,9 @@ msgstr "" "Studio, abyste zkontrolovali, zda existuje aktualizace systémových " "přednastavení." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Chcete uložit změny do \"%1%\"?" @@ -5969,15 +5976,12 @@ msgstr "Byl detekován objekt s více částmi" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6681,10 +6685,7 @@ msgstr "" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7556,8 +7557,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -9159,6 +9160,9 @@ msgstr "Generování Obrysu a Límce" msgid "Generating G-code" msgstr "Generování G-kódu" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Zpracování šablony filename_format se nezdařilo." @@ -9220,8 +9224,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r může nahrávat G-kódy do tiskového serveru. Toto pole by mělo " "obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K " @@ -9470,10 +9474,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10247,8 +10251,8 @@ msgstr "" "Zrychlení vnitřních stěn. 0 znamená použití běžného tiskového zrychlení" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Zrychlení vnitřní výplně. Pokud je hodnota vyjádřena v procentech (např. 100 " "%), bude vypočítána na základě výchozího zrychlení." @@ -12128,8 +12132,8 @@ msgstr "Nahraný soubor nemohl být načten, protože je prázdný" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj " -"nebo .amf(.xml)" +"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj nebo ." +"amf(.xml)" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13108,8 +13112,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" @@ -13470,8 +13474,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14050,7 +14054,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14069,32 +14073,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -14169,8 +14166,8 @@ msgid "" msgstr "" "Plochou na podložku\n" "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z " -"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na " -"podložku\" nebo stiskněte klávesu F." +"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku" +"\" nebo stiskněte klávesu F." #: resources/data/hints.ini: [hint:Object List] msgid "" @@ -14664,12 +14661,12 @@ msgstr "" #~ "Najdete podrobnosti o kalibraci průtoku dynamiky v naší wiki.\n" #~ "\n" #~ "Obvykle kalibrace není potřebná. Při spuštění tisku s jednobarevným/" -#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku " -#~ "dynamiky\" v menu spuštění tisku, tiskárna bude postupovat podle staré " -#~ "metody a zkalibruje filament před tiskem. Při spuštění tisku s " -#~ "vícebarevným/materiálovým filamentem bude tiskárna při každé změně " -#~ "filamentu používat výchozí kompenzační parametr pro filament, což má " -#~ "většinou dobrý výsledek.\n" +#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku dynamiky" +#~ "\" v menu spuštění tisku, tiskárna bude postupovat podle staré metody a " +#~ "zkalibruje filament před tiskem. Při spuštění tisku s vícebarevným/" +#~ "materiálovým filamentem bude tiskárna při každé změně filamentu používat " +#~ "výchozí kompenzační parametr pro filament, což má většinou dobrý " +#~ "výsledek.\n" #~ "\n" #~ "Všimněte si, že existují některé případy, které mohou způsobit, že " #~ "výsledek kalibrace nebude spolehlivý: použití texturované podložky pro " @@ -14873,8 +14870,8 @@ msgstr "" #~ "BambuStudio configuration file may be corrupted and is not abled to be " #~ "parsed.Please delete the file and try again." #~ msgstr "" -#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej " -#~ "analyzovat.Smažte soubor a zkuste to znovu." +#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej analyzovat." +#~ "Smažte soubor a zkuste to znovu." #~ msgid "" #~ "You can keep the modifield presets to the new project, discard or save " @@ -15559,8 +15556,8 @@ msgstr "" #~ msgstr "Úroveň ladění" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, " #~ "4:debug, 5:sledovat\n" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 3d5e274ee..88462817b 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbindung %s fehlgeschlagen! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Die BambuStudio-Konfigurationsdatei kann nicht analysiert werden und ist " "möglicherweise beschädigt. Bitte löschen Sie die Datei und versuchen Sie es " @@ -1730,7 +1730,7 @@ msgstr "" msgid "Edit" msgstr "Bearbeiten" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2302,9 +2302,9 @@ msgid "Top" msgstr "Oben" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3306,9 +3306,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -3982,9 +3982,9 @@ msgid "Switch to normal mode" msgstr "Zum Normalen Modus wechseln" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4202,6 +4202,12 @@ msgstr "Volumen:" msgid "Size:" msgstr "Größe:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4220,9 +4226,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Ein G-Code-Pfad geht über die Begrenzung der Druckplatte hinaus." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5873,7 +5877,7 @@ msgid "Printer settings" msgstr "Drucker-Einstellungen" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -6008,6 +6012,9 @@ msgstr "" "Sie Bambu Studio neu, um zu prüfen, ob es ein Update für die Systemprofile " "gibt." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Möchten Sie die Änderungen unter \" %1% \" speichern?" @@ -6170,15 +6177,12 @@ msgstr "Objekt mit mehreren Teilen wurde entdeckt" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6918,10 +6922,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7854,13 +7855,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" -">\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" +"\"Timelapse Wischturm\" wählen." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -9531,6 +9532,9 @@ msgstr "Generieren von Schürze und Rand" msgid "Generating G-code" msgstr "Generiere G-Code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Verarbeitung der Vorlage filename_format fehlgeschlagen." @@ -9597,15 +9601,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kann G-Code-Dateien auf einen Drucker-Host hochladen. Dieses Feld " "sollte den Hostnamen, die IP-Adresse oder die URL der Drucker-Host-Instanz " "enthalten. Auf einen Drucker-Host hinter HAProxy mit aktivierter " "Basisauthentifizierung kann zugegriffen werden, indem Benutzername und " -"Passwort in die URL in folgendem Format eingegeben werden: https://" -"username:password@Ihre-octopi-Adresse/" +"Passwort in die URL in folgendem Format eingegeben werden: https://username:" +"password@Ihre-octopi-Adresse/" msgid "Device UI" msgstr "Gerät UI" @@ -9868,10 +9872,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10702,8 +10706,8 @@ msgstr "" "Beschleunigung von Innenwänden. 0 bedeutet normale Druckbeschleunigung." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Beschleunigung der Füllung. Wenn der Wert als Prozentsatz ausgedrückt wird " "(z. B. 100 %), wird er auf Basis der Standardbeschleunigung berechnet." @@ -12731,8 +12735,8 @@ msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj " -"oder .amf(.xml) haben." +"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj oder ." +"amf(.xml) haben." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13769,12 +13773,12 @@ msgstr "" "Möchten Sie es umschreiben?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14193,8 +14197,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14886,7 +14890,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14905,32 +14909,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -16086,8 +16083,8 @@ msgstr "" #~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " #~ "automatically load or unload filiament." #~ msgstr "" -#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder " -#~ "\"Entladen\", um automatisch Filament zu laden oder zu entladen." +#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder \"Entladen" +#~ "\", um automatisch Filament zu laden oder zu entladen." #~ msgid "Choose one or more files (3mf/step/stl/obj/amf):" #~ msgstr "Wählen Sie eine oder mehrere Dateien aus (3mf/step/stl/obj/amf):" @@ -16779,20 +16776,20 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .3mf files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von " -#~ ".3mf-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " +#~ "von .3mf-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .step-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." +#~ "step-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .stl-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." +#~ "stl-Dateien festgelegt" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "" @@ -17512,11 +17509,11 @@ msgstr "" #~ msgstr "Pinselgröße festlegen" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, " -#~ "2:warning, 3:info, 4:debug, 5:trace\n" +#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:" +#~ "warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Teilen" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index 95fbd4f1c..c7727bcef 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1227,8 +1227,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connect %s failed! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio configuration file is not able to be parsed and may be " "corrupted. Please delete the file and try again." @@ -1709,7 +1709,7 @@ msgstr "Auto orient the object to improve print quality." msgid "Edit" msgstr "Edit" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2260,9 +2260,9 @@ msgid "Top" msgstr "Top" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3236,9 +3236,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -3905,9 +3905,9 @@ msgid "Switch to normal mode" msgstr "Switch to normal mode" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4123,6 +4123,12 @@ msgstr "Volume:" msgid "Size:" msgstr "Size:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4141,9 +4147,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "A G-code path goes beyond plate boundaries." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5770,7 +5774,7 @@ msgid "Printer settings" msgstr "Printer settings" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5902,6 +5906,9 @@ msgstr "" "Please update Bambu Studio or restart Bambu Studio to check if there is an " "update to system presets." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Do you want to save changes to \"%1%\"?" @@ -6052,15 +6059,12 @@ msgstr "Object with multiple parts was detected" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6786,10 +6790,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7692,13 +7693,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -9325,6 +9326,9 @@ msgstr "Generating skirt & brim" msgid "Generating G-code" msgstr "Generating G-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Failed processing of the filename_format template." @@ -9388,14 +9392,14 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgid "Device UI" msgstr "Device UI" @@ -9651,10 +9655,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10463,11 +10467,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13418,12 +13422,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13831,8 +13835,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14520,7 +14524,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14539,32 +14543,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -17032,11 +17029,11 @@ msgstr "" #~ msgstr "Set pen size" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgid "Share" #~ msgstr "Share" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index 4b160a827..f24e5fc67 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "¡Falló la conexión %s! [SN: %s, código=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "El archivo de configuración de BambuStudio no se puede analizar y puede " "estar dañado. Elimine el archivo e inténtelo de nuevo." @@ -1726,7 +1726,7 @@ msgstr "" msgid "Edit" msgstr "Editar" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2290,9 +2290,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3294,9 +3294,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -3971,9 +3971,9 @@ msgid "Switch to normal mode" msgstr "Cambiar al modo normal" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4190,6 +4190,12 @@ msgstr "Volumen:" msgid "Size:" msgstr "Tamaño:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4208,9 +4214,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Una ruta de código G va más allá del límite de la placa." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5852,7 +5856,7 @@ msgid "Printer settings" msgstr "Ajustes de la impresora" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5985,6 +5989,9 @@ msgstr "" "para comprobar si hay alguna actualización de los ajustes preestablecidos " "del sistema." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "¿Quieres guardar los cambios en \"%1%\"?" @@ -6144,15 +6151,12 @@ msgstr "Se ha detectado un objeto con varias partes" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6897,10 +6901,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7788,8 +7789,8 @@ msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " "height limits ,this may cause printing quality issues." msgstr "" -"La altura de la capa excede el límite en Printer Settings -> Extruder " -"-> Layer height limits ,esto puede causar problemas de calidad de " +"La altura de la capa excede el límite en Printer Settings -> Extruder -" +"> Layer height limits ,esto puede causar problemas de calidad de " "impresión." msgid "Adjust to the set range automatically? \n" @@ -7826,8 +7827,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir " "una «Torre de purga para el timelapse» \n" @@ -9495,6 +9496,9 @@ msgstr "Generando falda y ala" msgid "Generating G-code" msgstr "Generando G-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Fallo al procesar la plantilla filename_format." @@ -9559,15 +9563,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r puede cargar archivos de G-code a un host de impresora. Este campo " "debe contener el nombre de host, la dirección IP o la URL de la instancia " "host de la impresora. Se puede acceder al servidor de impresión detrás de " "HAProxy con la autenticación básica habilitada introduciendo el nombre de " -"usuario y la contraseña en la URL en el siguiente formato: https://" -"username:password@your-octopi-address/" +"usuario y la contraseña en la URL en el siguiente formato: https://username:" +"password@your-octopi-address/" msgid "Device UI" msgstr "Interfaz del dispositivo" @@ -9833,10 +9837,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10675,8 +10679,8 @@ msgstr "" "impresión normal." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleración del relleno disperso. Si el valor se expresa como un porcentaje " "(por ejemplo, el 100%), se calculará en función de la aceleración " @@ -13728,12 +13732,12 @@ msgstr "" "¿Quieres reescribirlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14155,8 +14159,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14848,7 +14852,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14867,32 +14871,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -17448,11 +17445,11 @@ msgstr "" #~ msgstr "Ajustar el tamaño del lápiz" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, " -#~ "2:advertencia, 3:información, 4:depuración, 5:rastreo\n" +#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:" +#~ "advertencia, 3:información, 4:depuración, 5:rastreo\n" #~ msgid "Share" #~ msgstr "Compartir…" @@ -17733,9 +17730,9 @@ msgstr "" #~ "Gracias por comprar un dispositivo Bambu Lab. Antes de usar tu " #~ "dispositivo Bambu Lab, lee los términos y condiciones. Al hacer clic para " #~ "aceptar el uso de tu dispositivo Bambu Lab, aceptas cumplir con la " -#~ "Política de privacidad y los Términos de uso (en conjunto, los " -#~ "\"Términos\"). Si no cumple o no está de acuerdo con la Política de " -#~ "privacidad de Bambu Lab, no utilice los equipos y servicios de Bambu Lab." +#~ "Política de privacidad y los Términos de uso (en conjunto, los \"Términos" +#~ "\"). Si no cumple o no está de acuerdo con la Política de privacidad de " +#~ "Bambu Lab, no utilice los equipos y servicios de Bambu Lab." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "El filamento %s es demasiado blando para usarlo con el AMS" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index 3cd123312..54883d0d7 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "La connexion à %s a échoué ! [SN : %s, code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Le fichier de configuration de BambuStudio ne peut pas être analysé et est " "peut-être endommagé. Supprimez le fichier et réessayez." @@ -1729,7 +1729,7 @@ msgstr "" msgid "Edit" msgstr "Éditer" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2290,9 +2290,9 @@ msgid "Top" msgstr "Haut" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3291,9 +3291,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -3973,9 +3973,9 @@ msgid "Switch to normal mode" msgstr "Passer en mode normal" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4192,6 +4192,12 @@ msgstr "Le volume:" msgid "Size:" msgstr "Taille:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4210,9 +4216,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Un chemin de G-code va au-delà de la limite de la plaque" #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5858,7 +5862,7 @@ msgid "Printer settings" msgstr "Paramètres de l'imprimante" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5992,6 +5996,9 @@ msgstr "" "génériques. Mettez à jour ou redémarrez Bambu Studio pour vérifier s'il " "existe une mise à jour des préréglages du système." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Voulez-vous enregistrer les modifications apportées à \"%1%\" ?" @@ -6151,15 +6158,12 @@ msgstr "Un objet en plusieurs parties a été détecté" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6904,10 +6908,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7850,8 +7851,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé " "d’ajouter une \"Tour de nettoyage timelapse\".\n" @@ -7997,9 +7998,9 @@ msgid "" "Bed temperature when cool plate is installed. Value 0 means the filament " "does not support to print on the Cool Plate" msgstr "" -"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool " -"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas " -"être imprimé sur le plateau froid." +"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate" +"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être " +"imprimé sur le plateau froid." msgid "Engineering Plate" msgstr "Engineering Plate" @@ -9532,6 +9533,9 @@ msgstr "Génération jupe et bord" msgid "Generating G-code" msgstr "Génération du G-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Échec traitement du modèle filename_format." @@ -9597,8 +9601,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r peut téléverser des fichiers G-code sur une imprimante hôte. Ce champ " "doit contenir le nom d'hôte, l'adresse IP ou l'URL de l'instance hôte de " @@ -9873,10 +9877,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10161,8 +10165,8 @@ msgid "" "thickness (top+bottom solid layers)" msgstr "" "Ajoutez du remplissage solide à proximité des surfaces inclinées pour " -"garantir l'épaisseur verticale de la coque (couches solides " -"supérieure+inférieure)." +"garantir l'épaisseur verticale de la coque (couches solides supérieure" +"+inférieure)." msgid "Internal bridge support thickness" msgstr "Épaisseur du support interne du pont" @@ -10711,8 +10715,8 @@ msgstr "" "l'impression." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accélération d'un remplissage internet. Si la valeur est exprimée en " "pourcentage (par exemple 100 %), elle sera calculée en fonction de " @@ -12737,13 +12741,13 @@ msgstr "Le fichier fourni n'a pas pu être lu car il est vide." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter " -"l'extension .stl, .obj ou .amf (.xml)." +"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ." +"stl, .obj ou .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter l'extension " -".3mf, .zip ou .amf." +"Format de fichier inconnu : le fichier d'entrée doit porter " +"l'extension .3mf, .zip ou .amf." msgid "Canceled" msgstr "Annulé" @@ -13779,12 +13783,12 @@ msgstr "" "Voulez-vous le réécrire ?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14207,8 +14211,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14900,7 +14904,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14919,32 +14923,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -16796,8 +16793,8 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir " -#~ "les .step" +#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir les ." +#~ "step" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" @@ -17520,11 +17517,11 @@ msgstr "" #~ msgstr "Définir la taille du stylo" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, " -#~ "2 :avertissement, 3 :info, 4 :débogage, 5 :trace\n" +#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :" +#~ "avertissement, 3 :info, 4 :débogage, 5 :trace\n" #~ msgid "Share" #~ msgstr "Partager" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index f09189ec7..bc4aee88a 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1236,8 +1236,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "A következőhöz való csatlakozás sikertelen: %s! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "A BambuStudio konfigurációs fájlt nem lehet elemezni, lehet, hogy megsérült. " "Kérjük, töröld a fájlt, és próbáld meg újra." @@ -1725,7 +1725,7 @@ msgstr "" msgid "Edit" msgstr "Szerkesztés" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2287,9 +2287,9 @@ msgid "Top" msgstr "Felül" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3278,9 +3278,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -3948,9 +3948,9 @@ msgid "Switch to normal mode" msgstr "Váltás normál módra" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4167,6 +4167,12 @@ msgstr "Térfogat:" msgid "Size:" msgstr "Méret:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4185,9 +4191,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "A G-kód útvonala túlmegy a tálca peremén." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5818,7 +5822,7 @@ msgid "Printer settings" msgstr "Nyomtatóbeállítások" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5950,6 +5954,9 @@ msgstr "" "beállításokhoz. Kérjük, frissítsd a Bambu Studiót vagy indítsd újra, hogy " "letöltsd az esetlegesen elérhető frissített rendszerbeállításokat." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Szeretnéd elmenteni \"%1%\" változásait?" @@ -6105,15 +6112,12 @@ msgstr "Több részből álló objektumot észleltünk" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6848,10 +6852,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7769,8 +7770,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy " "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb " @@ -9435,6 +9436,9 @@ msgstr "Szoknya & perem generálása" msgid "Generating G-code" msgstr "G-kód generálása" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Nem sikerült feldolgozni a fájlnév_formátum sablont." @@ -9500,8 +9504,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "A Slic3r képes G-kód fájlokat feltölteni a nyomtatóra. Ennek a mezőnek " "tartalmaznia kell a nyomtató hostnevét, IP-címét vagy URL-címét. A HAProxy " @@ -9768,10 +9772,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10598,8 +10602,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Gyorsulás a belső falaknál. A 0 normál nyomtatási gyorsulást jelent." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Gyorsulás a ritkás kitöltéseknél. Ha az érték százalékban van megadva (pl. " "100%), akkor az alapértelmezett gyorsulás alapján kerül kiszámításra." @@ -13606,12 +13610,12 @@ msgstr "" "Szeretnéd felülírni?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14018,8 +14022,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14709,7 +14713,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14728,32 +14732,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -17269,11 +17266,11 @@ msgstr "" #~ msgstr "Tollméret beállítása" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, " -#~ "3:info, 4:debug, 5:trace\n" +#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:" +#~ "info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Megosztás" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index bc876b284..4ea2cb57e 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connessione %s non riuscita! [SN: %s, codice=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Il file di configurazione di BambuStudio non può essere analizzato e " "potrebbe essere danneggiato. Elimina il file e riprova." @@ -1722,7 +1722,7 @@ msgstr "Orienta automaticamente l'oggetto per migliorare la qualità di stampa." msgid "Edit" msgstr "Modifica" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2284,9 +2284,9 @@ msgid "Top" msgstr "Superiore" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3284,9 +3284,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Se la temperatura attuale della camera è superiore alla temperatura di " "sicurezza del materiale, potrebbe verificarsi un ammorbidimento e un " @@ -3959,9 +3959,9 @@ msgid "Switch to normal mode" msgstr "Passa a modalità normale" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4177,6 +4177,12 @@ msgstr "Volume:" msgid "Size:" msgstr "Dimensioni:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4195,9 +4201,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Un percorso G-code va oltre il confine del piatto." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5827,7 +5831,7 @@ msgid "Printer settings" msgstr "Impostazioni stampante" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5960,6 +5964,9 @@ msgstr "" "generici. Aggiorna Bambu Studio o riavvia Bambu Studio per verificare se è " "disponibile un aggiornamento dei preset di sistema." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Vuoi salvare le modifiche a \"%1%\"?" @@ -6116,15 +6123,12 @@ msgstr "Rilevato oggetto con più parti" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6860,10 +6864,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7781,8 +7782,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -9013,8 +9014,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Vuoi effettuare l'aggiornamento adesso? Puoi " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " -"firmware\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" +"\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -9449,6 +9450,9 @@ msgstr "Generazione skirt & brim" msgid "Generating G-code" msgstr "Generazione G-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Elaborazione del modello filename_format non riuscita." @@ -9511,8 +9515,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r può caricare file di G-code su un host di stampa. Questo campo deve " "contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza dell'host " @@ -9783,10 +9787,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10621,8 +10625,8 @@ msgstr "" "accelerazione di stampa" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accelerazione del riempimento. Se il valore è espresso in percentuale (ad " "esempio 100%), verrà calcolato in base all'accelerazione predefinita." @@ -12635,13 +12639,13 @@ msgstr "Impossibile leggere il file fornito perché è vuoto." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato file sconosciuto. Il file di input deve avere " -"estensione .stl, .obj, .amf(.xml)." +"Formato file sconosciuto. Il file di input deve avere estensione .stl, ." +"obj, .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .3mf " -"o .zip.amf." +"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip." +"amf." msgid "Canceled" msgstr "Annullato" @@ -13664,8 +13668,8 @@ msgstr "" "Vuoi riscriverlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Rinomineremo i preset come \"Vendor Type Serial @printer selezionato\". \n" @@ -14080,8 +14084,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14772,7 +14776,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14791,32 +14795,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -15557,13 +15554,12 @@ msgstr "" #~ "wiki.\n" #~ "\n" #~ "Di solito la calibrazione non è necessaria. Quando si avvia una stampa a " -#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del " -#~ "flusso\" selezionata nel menu di avvio della stampa, la stampante " -#~ "eseguirà la vecchia procedura, calibrando il filamento prima della " -#~ "stampa; Quando si avvia una stampa multicolore/materiale, la stampante " -#~ "utilizzerà il parametro di compensazione predefinito del filamento " -#~ "durante ogni cambio, che nella maggior parte dei casi avrà un buon " -#~ "risultato.\n" +#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del flusso" +#~ "\" selezionata nel menu di avvio della stampa, la stampante eseguirà la " +#~ "vecchia procedura, calibrando il filamento prima della stampa; Quando si " +#~ "avvia una stampa multicolore/materiale, la stampante utilizzerà il " +#~ "parametro di compensazione predefinito del filamento durante ogni cambio, " +#~ "che nella maggior parte dei casi avrà un buon risultato.\n" #~ "\n" #~ "Tieni presente che ci sono alcuni casi che renderanno il risultato della " #~ "calibrazione non affidabile: utilizzo di un piatto texture; il piatto non " @@ -17365,11 +17361,11 @@ msgstr "" #~ msgstr "Imposta dimensioni penna" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgid "Share" #~ msgstr "Condividi" @@ -18088,8 +18084,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " -#~ "pulizia\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" +#~ "\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 31e4affb8..c91635376 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1222,8 +1222,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s を接続できませんでした　[SN: %s、code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio設定ファイルが破損し読み込めません。当該ファイルを削除してやり直し" "てください。" @@ -1704,7 +1704,7 @@ msgstr "オブジェクトの向きを自動的に調整する" msgid "Edit" msgstr "編集" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2248,9 +2248,9 @@ msgid "Top" msgstr "トップ" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3192,9 +3192,9 @@ msgstr "値が小さすぎます、0.5に戻します" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "チャンバー内の温度がマテリアルの安全温度を超えており、マテリアルの軟化やノズ" "ル詰まりの可能性があります。マテリアルの最大安全温度は%dです。" @@ -3850,9 +3850,9 @@ msgid "Switch to normal mode" msgstr "通常モードに切り替え" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4067,6 +4067,12 @@ msgstr "ボリューム" msgid "Size:" msgstr "サイズ:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4085,9 +4091,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "G-codeはプレートの境界を超えています。" #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5700,7 +5704,7 @@ msgid "Printer settings" msgstr "プリンター設定" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5832,6 +5836,9 @@ msgstr "" "Please update Bambu Studio or restart Bambu Studio to check if there is an " "update to system presets." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "変更を\"%1%\"に保存しますか？" @@ -5982,15 +5989,12 @@ msgstr "複数のパーツを含むオブジェクトが検出されました" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6714,10 +6718,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7602,8 +7603,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -9206,6 +9207,9 @@ msgstr "スカートとブリムを生成" msgid "Generating G-code" msgstr "G-codeを生成" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "filename_formatテンプレートを処理できませんでした" @@ -9263,8 +9267,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "ホスト名、IPアドレス、URLを入力してください。ユーザ名とパスワードがある場合、" "下記形式を参照してください https://username:password@your-octopi-address/" @@ -9515,10 +9519,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10303,11 +10307,11 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration of inner walls. 0 means normal printing acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13211,12 +13215,12 @@ msgstr "" "リライトしますか？" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13623,8 +13627,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14312,7 +14316,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14331,32 +14335,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -16712,8 +16709,8 @@ msgstr "" #~ msgstr "ペンサイズを設定" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、" #~ "4:debug、5:trace。\n" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index 8b9950347..45d72db4a 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s 연결 실패! [번호:%s, 코드=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio 구성 파일을 구문 분석할 수 없으며 손상되었을 수 있습니다. 파일을 " "삭제하고 다시 시도해 주세요." @@ -1711,7 +1711,7 @@ msgstr "출력품질향상을 위해 객체를 자동으로 회전시킵니다." msgid "Edit" msgstr "수정" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2252,9 +2252,9 @@ msgid "Top" msgstr "상단" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3203,9 +3203,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "현재 챔버 온도가 재료의 안전 온도보다 높습니다. 이로 인해 재료가 부드러워지" "고 노즐이 막힐 수 있습니다. 재료의 최대 안전 온도는 %d입니다." @@ -3863,9 +3863,9 @@ msgid "Switch to normal mode" msgstr "일반 모드 전환" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4081,6 +4081,12 @@ msgstr "체적:" msgid "Size:" msgstr "크기:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4099,9 +4105,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "G코드 경로가 빌드 플레이트 경계를 넘어갑니다." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -4918,8 +4922,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 " -"새 .gcode.3mf 파일을 내보내세요." +".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 새 ." +"gcode.3mf 파일을 내보내세요." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -5718,7 +5722,7 @@ msgid "Printer settings" msgstr "프린터 설정" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5850,6 +5854,9 @@ msgstr "" "Bambu Studio를 업데이트하거나 Bambu Studio를 다시 시작하여 시스템 사전 설정" "에 대한 업데이트가 있는지 확인하세요." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "변경 내용을 \"%1%\"에 저장하시겠습니까?" @@ -6002,15 +6009,12 @@ msgstr "여러 부품으로 구성된 단일 객체가 발견되었습니다." #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6736,10 +6740,7 @@ msgstr "다크 모드 활성화" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7626,8 +7627,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋" "습니다. \n" @@ -9237,6 +9238,9 @@ msgstr "스커트 및 브림 생성" msgid "Generating G-code" msgstr "G 코드 생성" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "filename_format 템플릿 처리에 실패했습니다." @@ -9300,8 +9304,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r은 G 코드 파일을 프린터 호스트에 업로드할 수 있습니다.이 필드에는 프린" "터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다.기본 " @@ -9559,10 +9563,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10360,11 +10364,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13280,12 +13284,12 @@ msgstr "" "다시 작성하시겠습니까?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13693,8 +13697,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14379,7 +14383,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14398,32 +14402,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index b5d32b664..d3ff2c494 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbinding met %s is mislukt! [SN: %s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Het configuratiebestand van BambuStudio kan niet worden verwerkt en is " "mogelijk beschadigd. Verwijder het bestand en probeer het opnieuw." @@ -1726,7 +1726,7 @@ msgstr "" msgid "Edit" msgstr "Bewerken" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2297,9 +2297,9 @@ msgid "Top" msgstr "Bovenste" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3298,9 +3298,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -3970,9 +3970,9 @@ msgid "Switch to normal mode" msgstr "Omzetten naar normale modus" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4189,6 +4189,12 @@ msgstr "Volume:" msgid "Size:" msgstr "Maat:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4207,9 +4213,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Een G-code pad treedt buiten de grenzen van de printplaat." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5851,7 +5855,7 @@ msgid "Printer settings" msgstr "Printer instellingen" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5986,6 +5990,9 @@ msgstr "" "opnieuw op om te controleren of er een update is voor " "systeemvoorinstellingen." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Wilt u de wijzigingen opslaan in \"%1%\"?" @@ -6145,15 +6152,12 @@ msgstr "Object met meerdere delen is gedetecteerd" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6896,10 +6900,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7652,10 +7653,9 @@ msgstr "" "Bedankt voor uw aankoop van een Bambu Lab-apparaat. Lees de algemene " "voorwaarden voordat u uw Bambu Lab apparaat gebruikt. Door te klikken om " "akkoord te gaan met het gebruik van uw Bambu Lab apparaat, gaat u akkoord " -"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de " -"\"Voorwaarden\"). Als u niet voldoet aan of akkoord gaat met het " -"Privacybeleid van Bambu Lab, maak dan geen gebruik van Bambu Lab apparatuur " -"en diensten." +"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de \"Voorwaarden" +"\"). Als u niet voldoet aan of akkoord gaat met het Privacybeleid van Bambu " +"Lab, maak dan geen gebruik van Bambu Lab apparatuur en diensten." msgid "and" msgstr "en" @@ -7825,8 +7825,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een " "„Timelapse Wipe Tower” toe te voegen \n" @@ -9493,6 +9493,9 @@ msgstr "Skirt en brim worden gegenereerd" msgid "Generating G-code" msgstr "Genereer G-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Mislukte verwerking van de bestandsnaam_opmaak sjabloon." @@ -9559,8 +9562,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kan G-codebestanden uploaden naar een printerhost. Dit veld moet de " "hostnaam, het IP-adres of de URL van de printerhostinstantie bevatten. " @@ -9827,10 +9830,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10660,8 +10663,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Versnelling van binnenwanden. 0 betekent normale afdrukversnelling" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Versnelling van de schaarse invulling. Als de waarde wordt uitgedrukt als " "een percentage (bijvoorbeeld 100%), wordt deze berekend op basis van de " @@ -13689,12 +13692,12 @@ msgstr "" "Wil je het herschrijven?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14107,8 +14110,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14796,7 +14799,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14815,32 +14818,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -17367,11 +17363,11 @@ msgstr "" #~ msgstr "Selecteer pen formaat" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, " -#~ "4:debug, 5:trace\n" +#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, 4:" +#~ "debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Delen" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 64cbd8002..edb9c0f6e 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -10,8 +10,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && " -"((n%100<12 || n%100>14))) ? 1 : 2;\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && ((n" +"%100<12 || n%100>14))) ? 1 : 2;\n" "X-Generator: Poedit 3.4.2\n" msgid "Supports Painting" @@ -1238,8 +1238,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Błąd połączenia z %s! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Plik konfiguracyjny Bambu Studio może być uszkodzony i nie może zostać " "przeanalizowany. Proszę usunąć plik i spróbować ponownie." @@ -1724,7 +1724,7 @@ msgstr "Automatycznie ustaw orientację obiektu, aby poprawić jakość druku." msgid "Edit" msgstr "Edytuj" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2286,9 +2286,9 @@ msgid "Top" msgstr "Góra" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3281,9 +3281,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Aktualna temperatura komory jest wyższa niż bezpieczna temperatura " "materiału; może to spowodować zmiękczenie materiału i zatkanie dyszy. " @@ -3954,9 +3954,9 @@ msgid "Switch to normal mode" msgstr "Przełącz na tryb normalny" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4174,6 +4174,12 @@ msgstr "Objętość:" msgid "Size:" msgstr "Rozmiar:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4192,9 +4198,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Ścieżka G-code wychodzi poza granice płyty." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5841,7 +5845,7 @@ msgid "Printer settings" msgstr "Ustawienia drukarki" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5973,6 +5977,9 @@ msgstr "" "pofilu. Proszę zaktualizować Bambu Studio lub ponownie uruchomić Bambu " "Studio, aby sprawdzić, czy są dostępne aktualizacje do ustawień systemowych." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Czy chcesz zapisać zmiany w \"%1%\"?" @@ -6131,15 +6138,12 @@ msgstr "Wykryto obiekt wieloczęściowy" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6881,10 +6885,7 @@ msgstr "Włącz tryb ciemny" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7792,8 +7793,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Podczas nagrywania timelapse'a bez głowicy zaleca się dodanie \"Timelaps - " "Wieża Czyszcząca\" \n" @@ -9450,6 +9451,9 @@ msgstr "Generowanie Skirtu i Brimu" msgid "Generating G-code" msgstr "Generowanie G-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Błąd przetwarzania szablonu filename_format." @@ -9514,8 +9518,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r może przesyłać pliki G-code do hosta drukarki. To pole powinno " "zawierać nazwę hosta, adres IP lub URL instancji hosta drukarki. Dostęp do " @@ -9783,10 +9787,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10613,8 +10617,8 @@ msgstr "" "przyspieszenia drukowania" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Przyspieszenie dla wypełnienia. Jeśli wartość jest wyrażona jako procent " "(np. 100%), będzie obliczana na podstawie domyślnego przyspieszenia." @@ -11758,10 +11762,10 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania " -"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może " -"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej " -"wartości na rozsądnie niskim poziomie." +"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar" +"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć " +"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na " +"rozsądnie niskim poziomie." msgid "Slicing Mode" msgstr "Tryb cięcia" @@ -12618,13 +12622,13 @@ msgstr "Nie można odczytać dostarczonego pliku, ponieważ jest pusty" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj " -"lub .amf(.xml)." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj lub ." +"amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf " -"lub .zip.amf." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip." +"amf." msgid "Canceled" msgstr "Anulowano" @@ -13645,8 +13649,8 @@ msgstr "" "Czy chcesz go zastąpić?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nazwa profilu zostanie zmieniona na \"Dostawca Typ Seria @nazwa drukarki, " @@ -14070,8 +14074,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14777,7 +14781,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14796,32 +14800,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -17349,11 +17346,11 @@ msgstr "" #~ msgstr "Ustaw rozmiar pióra" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, " -#~ "2:warning, 3:info, 4:debug, 5:trace\n" +#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, 2:" +#~ "warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Udostępnij" diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index b95594bac..a3a506cc4 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1241,8 +1241,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Conectar%s fracassado! [SN:%s , código =%s ]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "O arquivo de configuração do BambuStudio não pode ser analisado e pode estar " "corrompido. Exclua o arquivo e tente novamente." @@ -1727,7 +1727,7 @@ msgstr "" msgid "Edit" msgstr "Editar" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2285,9 +2285,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3281,9 +3281,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "A temperatura atual da câmara é superior à temperatura segura do material, o " "que pode resultar no amolecimento e entupimento do material. A temperatura " @@ -3952,9 +3952,9 @@ msgid "Switch to normal mode" msgstr "Alternar para o modo normal" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4170,6 +4170,12 @@ msgstr "Volume:" msgid "Size:" msgstr "Tamanho:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4188,9 +4194,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Um caminho do g-code vai além dos limites da placa." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5819,7 +5823,7 @@ msgid "Printer settings" msgstr "Configurações da impressora" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5951,6 +5955,9 @@ msgstr "" "predefinição genérica. Atualize o Bambu Studio ou reinicie o Bambu Studio " "para verificar se há uma atualização nas predefinições do sistema." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Você quer salvar as alterações em \"%1%“?" @@ -6108,15 +6115,12 @@ msgstr "Objeto com várias partes foi detectado" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6850,10 +6854,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7774,8 +7775,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Ao gravar o timelapse sem o cabeçote de ferramenta, é recomendável adicionar " "uma “Timelapse Wipe Tower” \n" @@ -9429,6 +9430,9 @@ msgstr "Gerando saia e brim" msgid "Generating G-code" msgstr "Gerando g-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Falha no processamento do modelo filename_format." @@ -9493,8 +9497,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "O Slic3r pode carregar arquivos de código G para um host de impressora. Esse " "campo deve conter o nome do host, endereço IP ou URL da instância do host da " @@ -9762,10 +9766,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10596,8 +10600,8 @@ msgstr "" "normal" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleração do preenchimento esparso. Se o valor for expresso como uma " "porcentagem (por exemplo, 100%), ele será calculado com base na aceleração " @@ -12604,8 +12608,8 @@ msgstr "O arquivo fornecido não pôde ser lido porque está vazio" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato de arquivo desconhecido. O arquivo de entrada deve ter a " -"extensão.stl, .obj, .amf (.xml)." +"Formato de arquivo desconhecido. O arquivo de entrada deve ter a extensão." +"stl, .obj, .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13626,8 +13630,8 @@ msgstr "" "Você quer reescrevê-lo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nós renomearíamos as predefinições como “Tipo de fornecedor Serial @printer " @@ -14052,8 +14056,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14744,7 +14748,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14763,32 +14767,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -17313,11 +17310,11 @@ msgstr "" #~ msgstr "Definir o tamanho da caneta" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, " -#~ "3:info, 4:debug, 5:trace\n" +#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, 3:" +#~ "info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Compartilhar" diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index b537c22a3..bed92a696 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " -"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.5\n" msgid "Supports Painting" @@ -1287,8 +1287,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Сбой подключения к %s [Серийный №:%s, код=%s]!" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Возможно, файл конфигурации BambuStudio повреждён и не может быть обработан. " "Пожалуйста, удалите файл и повторите попытку." @@ -1777,7 +1777,7 @@ msgstr "Автоориентация модели для улучшения ка msgid "Edit" msgstr "Правка" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2343,9 +2343,9 @@ msgid "Top" msgstr "Сверху" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3359,9 +3359,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Текущая температура внутри термокамеры превышает безопасную температуру для " "этого материала, что может привести к размягчению материала или засорению " @@ -4043,9 +4043,9 @@ msgid "Switch to normal mode" msgstr "Переключиться на обычный режим" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4265,6 +4265,12 @@ msgstr "Объём:" msgid "Size:" msgstr "Размер:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4283,9 +4289,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Траектория перемещения в G-коде выходит за границы печатного стола." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5968,7 +5972,7 @@ msgid "Printer settings" msgstr "Настройки принтера" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -6102,6 +6106,9 @@ msgstr "" "общим профилем. Обновите или перезапустите Bambu Studio, чтобы проверить " "наличие обновлений системных профилей." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Вы хотите сохранить изменения в \"%1%\"?" @@ -6265,15 +6272,12 @@ msgstr "Обнаружена модель, состоящая из нескол #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -7066,10 +7070,7 @@ msgstr "Включить тёмную тему" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -8003,8 +8004,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без видимости головы рекомендуется добавить «Черновая " "башня таймлапса». \n" @@ -9710,6 +9711,9 @@ msgstr "Генерация юбки и каймы" msgid "Generating G-code" msgstr "Генерация G-кода" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Ошибка обработки шаблона filename_format." @@ -9774,8 +9778,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r может загружать G-код файлы на хост принтера. В этом поле нужно " "указать имя хоста, IP-адрес или URL-адрес хост-экземпляра принтера. Доступ к " @@ -10050,10 +10054,10 @@ msgstr "Порог нависания участвующий в охлажден # ???? Процент представляет собой степень нависания. Например, если задано 25%, то все линии с нависанием менее 25% будут участвовать в охлаждении и замедлении. При 100% все нависающие линии участвуют в охлаждении и замедлении. Скорость после замедления принимает меньшее значение минимальной скорости печати и исходной скорости нависания. #, fuzzy, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Когда этот параметр включён, нависающая часть участвует в замедлении печати " "для лучшего охлаждения слоёв предотвращая проблему внезапного увеличения " @@ -10940,8 +10944,8 @@ msgstr "" "ускорения по умолчанию." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Ускорение на разреженном заполнении. Если задано в процентах, то значение " "вычисляться относительно ускорения по умолчанию." @@ -11271,8 +11275,8 @@ msgstr "" "две ближайшие линии заполнения с коротким отрезком периметра. Если не " "найдено такого отрезка периметра короче этого параметра, линия заполнения " "соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена значением «Длина привязок разреженного заполнения» " -"(infill_anchor), но не больше этого параметра.\n" +"периметра ограничена значением «Длина привязок разреженного " +"заполнения» (infill_anchor), но не больше этого параметра.\n" "Установите 0 для отключения привязок." msgid "0 (not anchored)" @@ -13042,8 +13046,8 @@ msgstr "" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или " -"*.zip.amf." +"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или *." +"zip.amf." msgid "Canceled" msgstr "Отменено" @@ -14104,8 +14108,8 @@ msgstr "" "Хотите перезаписать его?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n" @@ -14524,8 +14528,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15277,7 +15281,7 @@ msgstr "Ошибка печати" msgid "Removed" msgstr "Удалено" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -15296,32 +15300,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index 4df8036f2..70a793ad1 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Det gick inte att ansluta %s! [SN: %s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Bambu Studios konfigurationsfil kan inte tolkas och kan vara skadad. Ta bort " "filen och försök igen." @@ -1711,7 +1711,7 @@ msgstr "Auto placera objektet för att förbättra utskriftskvaliteten." msgid "Edit" msgstr "Redigera" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2265,9 +2265,9 @@ msgid "Top" msgstr "Topplager" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3251,9 +3251,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -3920,9 +3920,9 @@ msgid "Switch to normal mode" msgstr "Ändra till normal läge" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4138,6 +4138,12 @@ msgstr "Volym:" msgid "Size:" msgstr "Storlek:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4156,9 +4162,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "En G-kod väg passerar över byggplattans begränsningar." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5786,7 +5790,7 @@ msgid "Printer settings" msgstr "Skrivarens inställningar" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5918,6 +5922,9 @@ msgstr "" "generiska inställningar. Uppdatera Bambu Studio eller starta om Bambu Studio " "för att kontrollera om det finns en uppdatering av system inställningarna." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Spara ändringarna till \"%1%\"?" @@ -6071,15 +6078,12 @@ msgstr "Objekt med flera delar upptäcktes" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6809,10 +6813,7 @@ msgstr "Enable dark mode" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7334,8 +7335,8 @@ msgstr "" msgid "" "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "" -"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per " -"objekt\"." +"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt" +"\"." msgid "" "You selected external and AMS filament at the same time in an extruder, you " @@ -7726,8 +7727,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger " "till ett \"Timelapse Wipe Tower\".\n" @@ -7935,10 +7936,9 @@ msgid "" "maximum fan speed according to layer printing time" msgstr "" "Del kylfläktens hastigheten kommer att börja gå med min hastighet när den " -"beräknade lagringstiden inte är längre än lagringstiden i " -"inställningarna.När lager tiden är kortare än gräns värdet, ställer " -"fläkthastigheten sig mellan lägsta och högsta fläkthastighet enligt lagrets " -"utskriftstid" +"beräknade lagringstiden inte är längre än lagringstiden i inställningarna." +"När lager tiden är kortare än gräns värdet, ställer fläkthastigheten sig " +"mellan lägsta och högsta fläkthastighet enligt lagrets utskriftstid" msgid "Max fan speed threshold" msgstr "Max fläkt hastighets gräns" @@ -9364,6 +9364,9 @@ msgstr "Skapar Skirt & Brim" msgid "Generating G-code" msgstr "Skapar G-kod" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Skapande av filnamn_format template misslyckades." @@ -9427,8 +9430,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kan ladda upp G-kod filer till en printer värd. Det här fältet ska " "innehålla värdnamn, IP-adress eller URL för printer värd platsen. Du kan få " @@ -9690,10 +9693,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10509,8 +10512,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration av innerväggar. 0 betyder normal acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Acceleration av gles utfyllnad. Om värdet uttrycks som en procentsats (t.ex. " "100%) kommer det att beräknas baserat på standard accelerationen." @@ -13505,12 +13508,12 @@ msgstr "" "Vill du skriva om det?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13921,8 +13924,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14611,7 +14614,7 @@ msgstr "" msgid "Removed" msgstr "" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14630,32 +14633,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -17132,11 +17128,11 @@ msgstr "" #~ msgstr "Välj penn storlek" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, " -#~ "5:spåra\n" +#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:" +#~ "spåra\n" #~ msgid "Share" #~ msgstr "Dela" @@ -17408,9 +17404,9 @@ msgstr "" #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu " #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna " #~ "användningen av din Bambu Lab enhet godkänner du att följa " -#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade " -#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs " -#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster." +#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor" +#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy " +#~ "ska du inte använda Bambu Labs utrustning och tjänster." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "Filament %s är för mjukt för att kunna användas med AMS" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index 5e17a5d50..6393e2d5f 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: 2024-11-15 18:30+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -1244,8 +1244,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s bağlantısı başarısız oldu! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio yapılandırma dosyası bozulmuş olabilir ve ayrıştırılamıyor " "olabilir, lütfen dosyayı silin ve tekrar deneyin." @@ -1728,7 +1728,7 @@ msgstr "Baskı kalitesini artırmak için nesneyi otomatik olarak yönlendirin." msgid "Edit" msgstr "Düzenle" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2277,9 +2277,9 @@ msgid "Top" msgstr "Üst" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -3261,9 +3261,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, " "malzemenin yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum " @@ -3932,9 +3932,9 @@ msgid "Switch to normal mode" msgstr "Normal moda geç" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -4150,6 +4150,12 @@ msgstr "Hacim:" msgid "Size:" msgstr "Boyut:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4168,9 +4174,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Bir G kodu yolu plakanın sınırlarının ötesine geçer." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5830,7 +5834,7 @@ msgid "Printer settings" msgstr "Yazıcı Ayarları" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5962,6 +5966,9 @@ msgstr "" "ön ayarlarında bir güncelleme olup olmadığını kontrol etmek için lütfen " "Bambu Studio'yu güncelleyin veya Bambu Studio'yu yeniden başlatın." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "\"%1%\" dosyasındaki değişiklikleri kaydetmek istiyor musunuz?" @@ -6119,15 +6126,12 @@ msgstr "Birden fazla parçaya sahip nesne algılandı" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6899,10 +6903,7 @@ msgstr "Karanlık modu etkinleştirin" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7815,8 +7816,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Araç başlığı olmadan timelapse kaydederken, bir \"Timelapse Wipe Tower\" " "eklenmesi önerilir.\n" @@ -9363,8 +9364,8 @@ msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." msgstr "" -"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye " -"göre\" yazdırma sırasını seçin." +"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye göre" +"\" yazdırma sırasını seçin." msgid "" "The spiral vase mode does not work when an object contains more than one " @@ -9470,6 +9471,9 @@ msgstr "Etek ve kenar oluşturma" msgid "Generating G-code" msgstr "G kodu oluşturuluyor" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Dosyaadı_format şablonunun işlenmesi başarısız oldu." @@ -9533,8 +9537,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r, G kod dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " "alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini veya " @@ -9800,10 +9804,10 @@ msgstr "Soğutma katkısı için sarkma eşik değeri" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Hızı yavaşlatmak için hangi çıkıntı kısmının soğutma fonksiyonuna " "katılacağına karar verin. alt katmandan destek almadan hattın ne kadar " @@ -10638,8 +10642,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "İç duvarların ivmesi. 0 normal baskı ivmesini kullanmak anlamına gelir" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Seyrek dolgunun hızlandırılması. Değer yüzde olarak ifade edilirse (örn. " "%100), varsayılan ivmeye göre hesaplanacaktır." @@ -13672,8 +13676,8 @@ msgstr "" "Yeniden yazmak ister misin?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ön ayarları \"Satıcı Tipi Seri @seçtiğiniz yazıcı\" olarak yeniden " @@ -14089,8 +14093,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14831,7 +14835,7 @@ msgstr "Yazdırma Başarısız" msgid "Removed" msgstr "Kaldırıldı" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14850,32 +14854,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index 196729870..7e59cd462 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -1247,8 +1247,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Не вдалося підключити %s! [Серійний номер:%s, код=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio файл конфігурації може бути пошкоджений і не може бути " "розібраний. Будь ласка, видаліть файл і спробуйте ще раз." @@ -1731,7 +1731,7 @@ msgstr "Автоматично орієнтуйте об'єкт для покр msgid "Edit" msgstr "Редагувати" -msgid "Change to" +msgid "Delete then replace with" msgstr "" msgid "Delete this filament" @@ -2287,9 +2287,9 @@ msgid "Top" msgstr "Верх" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2667,8 +2667,8 @@ msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Це програмне забезпечення використовує компоненти з відкритим вихідним " -"кодом,авторські права та інші\n" +"Це програмне забезпечення використовує компоненти з відкритим вихідним кодом," +"авторські права та інші\n" "права власності належать їх відповідним власникам" #, c-format, boost-format @@ -2768,8 +2768,8 @@ msgstr "Будь ласка, введіть допустиме значення #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" -"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах " -"%.1f~%.1f)" +"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах %.1f~" +"%.1f)" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing " @@ -3288,9 +3288,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Поточна температура камери вища, ніж безпечна температура матеріалу, це може " "призвести до розм’якшення матеріалу та його забивання. Максимально безпечна " @@ -3956,9 +3956,9 @@ msgid "Switch to normal mode" msgstr "Переключитися у звичайний режим" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" msgid "" @@ -3967,8 +3967,8 @@ msgid "" "confirming that the height is within the build volume." msgstr "" "Об'єкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" -"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з " -"неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." +"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї," +"і підтвердження того, що висота знаходиться в межах обсягу збирання." msgid "Variable layer height" msgstr "Змінна висота шару" @@ -4174,6 +4174,12 @@ msgstr "Об'єм:" msgid "Size:" msgstr "Розмір:" +msgid "left nozzle" +msgstr "" + +msgid "right nozzle" +msgstr "" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4192,9 +4198,7 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "Шлях G-коду виходить за межі зони друку." #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." +msgid "Only the %s with external filament spool can print TPU" msgstr "" #, c-format, boost-format @@ -5853,7 +5857,7 @@ msgid "Printer settings" msgstr "Налаштування принтера" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." +msgid "The %s nozzle can not print %s." msgstr "" #, boost-format @@ -5985,6 +5989,9 @@ msgstr "" "ласка, оновіть Bambu Studio або перезапустіть Bambu Studio, щоб перевірити, " "чи є оновлення для системи пресети." +msgid "Sync filaments with AMS successfully." +msgstr "" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Ви хочете зберегти зміни в \\%1%\\?" @@ -6144,15 +6151,12 @@ msgstr "Виявлено об'єкт, що складається з кільк #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" +"Connected printer is %s. It must match the project preset for printing.\n" msgstr "" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "" - -msgid "Do you want to sync printer presets immediately?" +"Do you want to sync the printer information and automatically switch the " +"preset?" msgstr "" msgid "Tips" @@ -6917,10 +6921,7 @@ msgstr "Увімкнути темний режим" msgid "Filament Arrange" msgstr "" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" +msgid "Pop up to select filament arrangement mode" msgstr "" msgid "User Experience" @@ -7834,8 +7835,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записі таймлапсу без інструментальної головки рекомендується додати " "“Timelapse Wipe Tower” \n" @@ -9489,6 +9490,9 @@ msgstr "Створення спідниці та кайми" msgid "Generating G-code" msgstr "Генерація G-code" +msgid "Only supports up to one TPU filament." +msgstr "" + msgid "Failed processing of the filename_format template." msgstr "Не вдалося обробити шаблон filename_format." @@ -9551,8 +9555,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r може завантажувати файли G-коду на хост принтера. Це поле повинно " "містити ім'я хоста, IP-адресу або URL-адресу екземпляра вузла принтера. " @@ -9820,10 +9824,10 @@ msgstr "Поріг нависання для участі в охолоджен #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Визначте, яка частина нависання приєднується до функції охолодження, щоб " "зменшити швидкість. Виражається у відсотках, що вказує, яка ширина лінії без " @@ -10664,8 +10668,8 @@ msgstr "" "друку" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Прискорення розрідженого заповнення. Якщо значення виражене у відсотках " "(наприклад,100%), воно буде обчислюватися на основі прискорення за " @@ -11889,8 +11893,8 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Створювати підтримку тільки для критичних областей, включаючи гострий " -"хвіст,консоль і т.д." +"Створювати підтримку тільки для критичних областей, включаючи гострий хвіст," +"консоль і т.д." msgid "Remove small overhangs" msgstr "Видалити невеликі виступи" @@ -12664,13 +12668,13 @@ msgstr "Наданий файл не вдалося прочитати, оскі msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj " -"або .amf (.xml)." +"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або ." +"amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf " -"або .zip.amf." +"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip." +"amf." msgid "Canceled" msgstr "Скасовано" @@ -13720,8 +13724,8 @@ msgstr "" "Чи бажаєте ви їх перезаписати?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, " @@ -14150,8 +14154,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14892,7 +14896,7 @@ msgstr "Друк не вдався" msgid "Removed" msgstr "Видалено" -msgid "Filament arrangement method" +msgid "Filament arrangement" msgstr "" msgid "Don't remind me again" @@ -14911,32 +14915,25 @@ msgid "Manual Mode" msgstr "" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." msgstr "" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." msgstr "" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "" - -msgid "(Arrange after slicing)" -msgstr "" - -msgid "(Arrange before slicing)" -msgstr "" - -msgid "(Please sync printer)" +msgid "Manually assign filament to the left or right nozzle." msgstr "" msgid "Global settings" msgstr "" -msgid "More info on wiki" +msgid "Learn more" +msgstr "" + +msgid "(Sync with printer)" msgstr "" msgid "We will slice according to this grouping method:" @@ -16474,8 +16471,8 @@ msgstr "" #~ "Only one of the results with the same name will be saved. Are you sure " #~ "you want to overrides the other results?" #~ msgstr "" -#~ "Збережено буде лише один із результатів з однаковою назвою. Ви " -#~ "впевнені,що хочете перезаписати інші результати?" +#~ "Збережено буде лише один із результатів з однаковою назвою. Ви впевнені," +#~ "що хочете перезаписати інші результати?" #~ msgid "" #~ "There is already a historical calibration result with the same name: %s. " @@ -16932,8 +16929,8 @@ msgstr "" #~ msgstr "Рівень налагодження" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, " #~ "2: попередження, 3: інформація, 4: налагодження, 5: трасування\n" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index f5da556b4..33432bddb 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-12 16:02+0800\n" +"POT-Creation-Date: 2025-01-13 14:58+0800\n" "PO-Revision-Date: 2025-01-08 20:27+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1235,8 +1235,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "连接 %s 失败。[SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Bambu Studio配置文件可能已损坏而无法解析。请删除此文件并重新启动BambuStudio。" @@ -1713,8 +1713,8 @@ msgstr "自动调整对象朝向以提高打印质量。" msgid "Edit" msgstr "编辑" -msgid "Change to" -msgstr "更改为" +msgid "Delete then replace with" +msgstr "删除后替换为" msgid "Delete this filament" msgstr "删除此耗材丝" @@ -2246,9 +2246,9 @@ msgid "Top" msgstr "顶部" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" "风扇在打印中调控温度以提升打印质量，系统会根据不同的打印材料自动调节风扇的开" "关和转速。" @@ -3165,9 +3165,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "当前腔体温度高于材料的安全温度，这可能导致材料软化和堵塞。该材料的最高安全温" "度为 %d。" @@ -3815,12 +3815,12 @@ msgid "Switch to normal mode" msgstr "切换到普通模式" msgid "" -"An object is laid on the left/right extruder only area.\n" +"An object is laid on the left/right nozzle only area.\n" "Please make sure the filaments used by this object on this area are not " -"mapped to the other extruders." +"mapped to the other nozzles." msgstr "" -"一个模型放置在仅左/右挤出机可打印区域。\n" -"请确保该模型在该区域内使用的材料没有映射到其他挤出机。" +"一个模型放置在仅左/右喷嘴可打印区域。\n" +"请确保该模型在该区域内使用的材料没有映射到其他喷嘴。" msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" @@ -4035,6 +4035,12 @@ msgstr "体积：" msgid "Size:" msgstr "尺寸：" +msgid "left nozzle" +msgstr "左喷嘴" + +msgid "right nozzle" +msgstr "右喷嘴" + #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -4051,10 +4057,8 @@ msgid "A G-code path goes beyond the boundary of plate." msgstr "检测超出热床边界的G-code路径。" #, c-format, boost-format -msgid "" -"Multiple TPU filaments are not allowed to print at the same time, and the " -"TPU filament must be placed in the virtual slot of %s." -msgstr "不允许同时打印多根TPU长丝，并且TPU长丝必须放置在%s的虚拟插槽中。" +msgid "Only the %s with external filament spool can print TPU" +msgstr "只能使用%s的外挂料打印TPU" #, c-format, boost-format msgid "" @@ -4866,8 +4870,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" -"的.gcode.3mf文件。" +".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." +"gcode.3mf文件。" #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -5646,8 +5650,8 @@ msgid "Printer settings" msgstr "打印机设置" #, c-format, boost-format -msgid "Filament %s cannot be placed in the %s extruder for printing." -msgstr "材料 %s 不能放置在 %s 挤出机中进行打印。" +msgid "The %s nozzle can not print %s." +msgstr "%s喷嘴不可以打印%s" #, boost-format msgid " plate %1%: " @@ -5779,6 +5783,9 @@ msgstr "" "有一些未知或不兼容的填料映射到通用预设中。请更新Bambu Studio或重新启动Bambu " "Studio，以检查是否有系统预设的更新。" +msgid "Sync filaments with AMS successfully." +msgstr "完成AMS的耗材同步。" + #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "是否保存修改到“%1%”？" @@ -5920,18 +5927,13 @@ msgstr "检测到多零件对象" #, c-format, boost-format msgid "" -"The printer you are currently bound to is %s,\n" -"The printer preset for your current file is %s,\n" -msgstr "" -"您当前绑定的打印机是%s，\n" -"当前文件的打印机预设为%s，\n" +"Connected printer is %s. It must match the project preset for printing.\n" +msgstr "当前连接的打印机为 %s，需要和项目预设匹配才能打印。\n" msgid "" -"Do you want to sync printer presets, ams and nozzle information immediately?" -msgstr "您想立即同步打印机预设、ams和喷嘴信息吗" - -msgid "Do you want to sync printer presets immediately?" -msgstr "您想立即同步打印机预设吗？" +"Do you want to sync the printer information and automatically switch the " +"preset?" +msgstr "是否从打印机同步信息并自动切换项目预设？" msgid "Tips" msgstr "提示" @@ -6643,13 +6645,10 @@ msgid "Enable dark mode" msgstr "开启深色模式" msgid "Filament Arrange" -msgstr "" +msgstr "材料分配" -msgid "Ignore ext filament when auto grouping" -msgstr "" - -msgid "Pop up to select filament map mode" -msgstr "" +msgid "Pop up to select filament arrangement mode" +msgstr "弹窗以选择材料分配模式" msgid "User Experience" msgstr "用户体验" @@ -7529,8 +7528,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" @@ -9100,6 +9099,9 @@ msgstr "正在生成skirt和brim" msgid "Generating G-code" msgstr "正在生成G-code" +msgid "Only supports up to one TPU filament." +msgstr "最多仅支持1个TPU材料" + msgid "Failed processing of the filename_format template." msgstr "处理文件名格式模板失败。" @@ -9158,8 +9160,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、" "IP地址或URL。启用基本身份验证的Print host可以通过将用户名和密码放入以下格式的" @@ -9389,10 +9391,10 @@ msgstr "参与冷却降速的悬垂阈值" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "决定多少阈值的悬垂参与冷却降速.用百分比表示超出线宽的范围。" msgid "Bridge direction" @@ -10146,8 +10148,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "内部壁的加速度。0表示使用正常的打印加速度。" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "稀疏填充的加速度。如果该值表示为百分比（例如100%），则将根据默认加速度进行计" "算。" @@ -12203,10 +12205,10 @@ msgid "" msgstr "" "请从我们的wiki中找到动态流量校准的详细信息。\n" "\n" -"通常情况下，校准是不必要的。当您开始单色/单材料打印，并在打印开始菜单中勾选了" -"“动态流量校准”选项时，打印机将按照旧的方式，在打印前校准丝料；当您开始多色/多" -"材料打印时，打印机将在每次换丝料时使用默认的补偿参数，这在大多数情况下会产生" -"良好的效果。\n" +"通常情况下，校准是不必要的。当您开始单色/单材料打印，并在打印开始菜单中勾选" +"了“动态流量校准”选项时，打印机将按照旧的方式，在打印前校准丝料；当您开始多色/" +"多材料打印时，打印机将在每次换丝料时使用默认的补偿参数，这在大多数情况下会产" +"生良好的效果。\n" "\n" "有几种情况可能导致校准结果不可靠，例如打印板的的附着力不足。清洗打印板或者使" "用胶水可以增强打印板附着力。您可以在我们的维基上找到更多相关信息。\n" @@ -12402,13 +12404,13 @@ msgid "Printing Parameters" msgstr "打印参数" msgid "Synchronize nozzle and AMS information" -msgstr "" +msgstr "同步喷嘴和AMS信息" msgid "Please connect the printer first before synchronizing." -msgstr "" +msgstr "同步前请先连接打印机" msgid "Nozzle Info" -msgstr "" +msgstr "喷嘴信息" msgid "Plate Type" msgstr "热床类型" @@ -12951,8 +12953,8 @@ msgstr "" "你想重写预设吗" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n" @@ -13337,8 +13339,8 @@ msgid "nozzle size memorized: %d" msgstr "存储的喷嘴尺寸：%d" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "预设的喷嘴类型尺寸与记忆中的喷嘴不一致。你最近换喷嘴了吗？" #, c-format, boost-format @@ -14001,8 +14003,8 @@ msgstr "打印失败" msgid "Removed" msgstr "移除" -msgid "Filament arrangement method" -msgstr "" +msgid "Filament arrangement" +msgstr "材料分配" msgid "Don't remind me again" msgstr "不再提醒" @@ -14020,36 +14022,27 @@ msgid "Manual Mode" msgstr "手动模式" msgid "" -"Disregrad the filaments in AMS. Optimize filament usage by calculating the " -"best arrangement for the left and right nozzles. Arrange the filaments on " -"the printer based on the slicing results." -msgstr "" -"忽略AMS中的材料，通过计算最佳分配方案来减少材料消耗。需要根据切片结果去打印机" -"调整材料" +"Calculate the best filament arrangement to minimize usage. Need to manually " +"arrange filaments on the printer based on slicing results." +msgstr "通过计算最佳分配方案来减少材料消耗。需要根据切片结果去打印机调整材料" msgid "" -"Based on the current filaments in the AMS, arrange the filaments to the left " -"and right nozzles." -msgstr "根据AMS中的材料，将材料分配到左右喷嘴" +"Use AMS filaments to automatically assign filament to the left or right " +"nozzle." +msgstr "根据AMS中的材料，将材料分配到左/右喷嘴" -msgid "Mannully arrange the filaments for the left and right nozzles." -msgstr "无需推荐，切片时手动设置左右喷嘴的材料分配" - -msgid "(Arrange after slicing)" -msgstr "（先切片后摆料）" - -msgid "(Arrange before slicing)" -msgstr "（先摆料后切片）" - -msgid "(Please sync printer)" -msgstr "（请连接打印机）" +msgid "Manually assign filament to the left or right nozzle." +msgstr "无需推荐，切片时手动设置左/右喷嘴的材料分配" msgid "Global settings" msgstr "全局设置" -msgid "More info on wiki" +msgid "Learn more" msgstr "更多信息查看wiki" +msgid "(Sync with printer)" +msgstr "（请连接打印机）" + msgid "We will slice according to this grouping method:" msgstr "我们将基于当前分配方案切片：" @@ -14331,6 +14324,77 @@ msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" +#~ msgid "Change to" +#~ msgstr "更改为" + +#~ msgid "" +#~ "Calculate the best filament arrangement to minimize usage. Manually " +#~ "arrange filaments on the printer based on slicing results." +#~ msgstr "" +#~ "通过计算最佳分配方案来减少材料消耗。需要根据切片结果去打印机手动调整材料" + +#~ msgid "" +#~ "An object is laid on the left/right extruder only area.\n" +#~ "Please make sure the filaments used by this object on this area are not " +#~ "mapped to the other extruders." +#~ msgstr "" +#~ "一个模型放置在仅左/右挤出机可打印区域。\n" +#~ "请确保该模型在该区域内使用的材料没有映射到其他挤出机。" + +#, c-format, boost-format +#~ msgid "" +#~ "Multiple TPU filaments are not allowed to print at the same time, and the " +#~ "TPU filament must be placed in the virtual slot of %s." +#~ msgstr "不允许同时打印多根TPU长丝，并且TPU长丝必须放置在%s的虚拟插槽中。" + +#, c-format, boost-format +#~ msgid "Filament %s cannot be placed in the %s extruder for printing." +#~ msgstr "材料 %s 不能放置在 %s 挤出机中进行打印。" + +#, c-format, boost-format +#~ msgid "" +#~ "The printer you are currently bound to is %s,\n" +#~ "The printer preset for your current file is %s,\n" +#~ msgstr "" +#~ "您当前绑定的打印机是%s，\n" +#~ "当前文件的打印机预设为%s，\n" + +#~ msgid "" +#~ "Do you want to sync printer presets, ams and nozzle information " +#~ "immediately?" +#~ msgstr "您想立即同步打印机预设、ams和喷嘴信息吗" + +#~ msgid "Do you want to sync printer presets immediately?" +#~ msgstr "您想立即同步打印机预设吗？" + +#~ msgid "" +#~ "Disregrad the filaments in AMS. Optimize filament usage by calculating " +#~ "the best arrangement for the left and right nozzles. Arrange the " +#~ "filaments on the printer based on the slicing results." +#~ msgstr "" +#~ "忽略AMS中的材料，通过计算最佳分配方案来减少材料消耗。需要根据切片结果去打" +#~ "印机调整材料" + +#~ msgid "" +#~ "Based on the current filaments in the AMS, arrange the filaments to the " +#~ "left and right nozzles." +#~ msgstr "根据AMS中的材料，将材料分配到左右喷嘴" + +#~ msgid "Mannully arrange the filaments for the left and right nozzles." +#~ msgstr "无需推荐，切片时手动设置左右喷嘴的材料分配" + +#~ msgid "(Arrange after slicing)" +#~ msgstr "（先切片后摆料）" + +#~ msgid "(Arrange before slicing)" +#~ msgstr "（先摆料后切片）" + +#~ msgid "(Please sync printer)" +#~ msgstr "（请连接打印机）" + +#~ msgid "More info on wiki" +#~ msgstr "更多信息查看wiki" + #~ msgid "Axis go home" #~ msgstr "Axis回Home点" @@ -15359,8 +15423,8 @@ msgstr "" #~ "The .gcode.3mf file contains no G-code data.Please slice it whthBambu " #~ "Studio and export a new .gcode.3mf file." #~ msgstr "" -#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" -#~ "的.gcode.3mf文件。" +#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." +#~ "gcode.3mf文件。" #~ msgid "Connection lost. Please retry." #~ msgstr "连接丢失。请重试。" @@ -15802,8 +15866,8 @@ msgstr "" #~ msgstr "不能删除被其他预设继承的预设" #~ msgid "" -#~ "Your nozzle diameter in preset is not consistent with memorized " -#~ "nozzle.Did you change your nozzle lately ? " +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle." +#~ "Did you change your nozzle lately ? " #~ msgstr "预设中的喷嘴直径与记忆中的喷嘴直径不一致。您最近更换了喷嘴吗？" #~ msgid "Improt Presets" @@ -16070,11 +16134,11 @@ msgstr "" #~ msgstr "调试等级" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， " -#~ "5:trace\n" +#~ "设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， 5:" +#~ "trace\n" #~ msgid "Load custom gcode" #~ msgstr "加载自定义 gcode" @@ -20336,8 +20400,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host " -#~ "upload\"" +#~ "You have the following presets with saved options for \"Print Host upload" +#~ "\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index b0eee6931..128cd776c 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ