diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 9ca6e93ee..962c59150 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -5262,6 +5262,12 @@ msgstr "" msgid "Update" msgstr "" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, possible-c-format, possible-boost-format msgid "%s error" msgstr "" @@ -5639,15 +5645,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -5714,9 +5714,8 @@ msgid "" msgstr "" msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, possible-boost-format @@ -5981,9 +5980,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" @@ -6124,11 +6120,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6178,9 +6169,29 @@ msgstr "" msgid "Custom supports and color painting were removed before repairing." msgstr "" +#, possible-c-format, possible-boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -6957,11 +6968,6 @@ msgstr "" msgid "Error code" msgstr "" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, possible-c-format, possible-boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7123,6 +7129,11 @@ msgstr "" msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, possible-c-format, possible-boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7409,8 +7420,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "" @@ -8020,6 +8031,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8083,6 +8099,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8092,9 +8114,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8147,6 +8167,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -12565,8 +12591,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index cbe932e62..c07cef6a0 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -5439,6 +5439,12 @@ msgstr "Stav" msgid "Update" msgstr "Aktualizovat" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s chyba" @@ -5824,15 +5830,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -5904,9 +5904,8 @@ msgstr "" "přednastavení." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6191,9 +6190,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "Upravené předvolby si můžete ponechat pro nový projekt nebo je zahodit" @@ -6336,11 +6332,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6393,9 +6384,29 @@ msgstr "Odeslat do tiskárny" msgid "Custom supports and color painting were removed before repairing." msgstr "Vlastní podpěry a barevné malby byly před opravou odstraněny." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7178,11 +7189,6 @@ msgstr "odeslat dokončeno" msgid "Error code" msgstr "Chybový kód" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7365,6 +7371,11 @@ msgstr "Délka názvu překračuje limit." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7670,8 +7681,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -8324,6 +8335,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8387,6 +8403,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8396,9 +8418,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8451,6 +8471,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13279,8 +13305,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" @@ -14336,8 +14362,8 @@ msgid "" msgstr "" "Plochou na podložku\n" "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z " -"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku" -"\" nebo stiskněte klávesu F." +"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na " +"podložku\" nebo stiskněte klávesu F." #: resources/data/hints.ini: [hint:Object List] msgid "" @@ -14855,12 +14881,12 @@ msgstr "" #~ "Najdete podrobnosti o kalibraci průtoku dynamiky v naší wiki.\n" #~ "\n" #~ "Obvykle kalibrace není potřebná. Při spuštění tisku s jednobarevným/" -#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku dynamiky" -#~ "\" v menu spuštění tisku, tiskárna bude postupovat podle staré metody a " -#~ "zkalibruje filament před tiskem. Při spuštění tisku s vícebarevným/" -#~ "materiálovým filamentem bude tiskárna při každé změně filamentu používat " -#~ "výchozí kompenzační parametr pro filament, což má většinou dobrý " -#~ "výsledek.\n" +#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku " +#~ "dynamiky\" v menu spuštění tisku, tiskárna bude postupovat podle staré " +#~ "metody a zkalibruje filament před tiskem. Při spuštění tisku s " +#~ "vícebarevným/materiálovým filamentem bude tiskárna při každé změně " +#~ "filamentu používat výchozí kompenzační parametr pro filament, což má " +#~ "většinou dobrý výsledek.\n" #~ "\n" #~ "Všimněte si, že existují některé případy, které mohou způsobit, že " #~ "výsledek kalibrace nebude spolehlivý: použití texturované podložky pro " diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 2a18fef21..cdd9bf295 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5610,6 +5610,12 @@ msgstr "Status" msgid "Update" msgstr "Update" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s Fehler" @@ -5998,15 +6004,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6079,9 +6079,8 @@ msgstr "" "gibt." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6391,9 +6390,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Sie können die geänderten Profile in das neue Projekt übernehmen oder sie " @@ -6542,11 +6538,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6603,9 +6594,29 @@ msgstr "" "Benutzerdefinierte Stützstrukturen und Farbgebungen wurden vor der Reparatur " "entfernt." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7414,11 +7425,6 @@ msgstr "Senden abgeschlossen" msgid "Error code" msgstr "Fehlercode" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7615,6 +7621,11 @@ msgstr "Die Namenslänge überschreitet das Limit." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7958,13 +7969,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" -"\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" +">\"Timelapse Wischturm\" wählen." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -8635,6 +8646,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8698,6 +8714,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8707,9 +8729,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8769,6 +8789,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13924,12 +13950,12 @@ msgstr "" "Möchten Sie es umschreiben?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -16311,8 +16337,8 @@ msgstr "" #~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " #~ "automatically load or unload filiament." #~ msgstr "" -#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder \"Entladen" -#~ "\", um automatisch Filament zu laden oder zu entladen." +#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder " +#~ "\"Entladen\", um automatisch Filament zu laden oder zu entladen." #~ msgid "Choose one or more files (3mf/step/stl/obj/amf):" #~ msgstr "Wählen Sie eine oder mehrere Dateien aus (3mf/step/stl/obj/amf):" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index c7ebd5594..8ef9735a4 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5511,6 +5511,12 @@ msgstr "Status" msgid "Update" msgstr "Update" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s error" @@ -5897,15 +5903,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -5975,9 +5975,8 @@ msgstr "" "update to system presets." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6271,9 +6270,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "You can keep the modified presets to the new project or discard them" @@ -6420,11 +6416,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6478,9 +6469,29 @@ msgstr "Send to printer" msgid "Custom supports and color painting were removed before repairing." msgstr "Custom supports and color painting were removed before repairing." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7279,11 +7290,6 @@ msgstr "send completed" msgid "Error code" msgstr "Error code" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7472,6 +7478,11 @@ msgstr "The name length exceeds the limit." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7799,13 +7810,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -8459,6 +8470,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8522,6 +8538,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8531,9 +8553,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8592,6 +8612,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13575,12 +13601,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index e1dece8a6..bba5497c3 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5586,6 +5586,12 @@ msgstr "Estado" msgid "Update" msgstr "Actualizar" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s error" @@ -5977,15 +5983,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6056,9 +6056,8 @@ msgstr "" "del sistema." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6363,9 +6362,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Puedes conservar los preajustes modificados en el nuevo proyecto o " @@ -6515,11 +6511,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6575,9 +6566,29 @@ msgstr "" "Los soportes personalizados y la pintura de color se eliminaron antes de la " "reparación." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7394,11 +7405,6 @@ msgstr "envío completo" msgid "Error code" msgstr "Código de error:" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7591,6 +7597,11 @@ msgstr "La longitud del nombre supera el límite." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7930,8 +7941,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir " "una «Torre de purga para el timelapse» \n" @@ -8601,6 +8612,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8664,6 +8680,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8673,9 +8695,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8735,6 +8755,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13883,12 +13909,12 @@ msgstr "" "¿Quieres reescribirlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -17958,9 +17984,9 @@ msgstr "" #~ "Gracias por comprar un dispositivo Bambu Lab. Antes de usar tu " #~ "dispositivo Bambu Lab, lee los términos y condiciones. Al hacer clic para " #~ "aceptar el uso de tu dispositivo Bambu Lab, aceptas cumplir con la " -#~ "Política de privacidad y los Términos de uso (en conjunto, los \"Términos" -#~ "\"). Si no cumple o no está de acuerdo con la Política de privacidad de " -#~ "Bambu Lab, no utilice los equipos y servicios de Bambu Lab." +#~ "Política de privacidad y los Términos de uso (en conjunto, los " +#~ "\"Términos\"). Si no cumple o no está de acuerdo con la Política de " +#~ "privacidad de Bambu Lab, no utilice los equipos y servicios de Bambu Lab." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "El filamento %s es demasiado blando para usarlo con el AMS" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index eceeeb7c1..7c5e4ac76 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5593,6 +5593,12 @@ msgstr "État" msgid "Update" msgstr "Mise à jour" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "Erreur %s" @@ -5983,15 +5989,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6063,9 +6063,8 @@ msgstr "" "existe une mise à jour des préréglages du système." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6370,9 +6369,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Vous pouvez conserver les préréglages modifiés dans le nouveau projet ou les " @@ -6525,11 +6521,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6585,9 +6576,29 @@ msgstr "" "Les supports personnalisés et la peinture de couleur ont été retirés avant " "la réparation." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7401,11 +7412,6 @@ msgstr "Envoi terminé" msgid "Error code" msgstr "Code erreur" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7606,6 +7612,11 @@ msgstr "La longueur du nom dépasse la limite." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7954,8 +7965,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé " "d’ajouter une \"Tour de nettoyage timelapse\".\n" @@ -8101,9 +8112,9 @@ msgid "" "Bed temperature when cool plate is installed. Value 0 means the filament " "does not support to print on the Cool Plate" msgstr "" -"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate" -"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être " -"imprimé sur le plateau froid." +"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool " +"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas " +"être imprimé sur le plateau froid." msgid "Engineering Plate" msgstr "Engineering Plate" @@ -8630,6 +8641,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8693,6 +8709,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8702,9 +8724,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8764,6 +8784,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -10301,8 +10327,8 @@ msgid "" "thickness (top+bottom solid layers)" msgstr "" "Ajoutez du remplissage solide à proximité des surfaces inclinées pour " -"garantir l'épaisseur verticale de la coque (couches solides supérieure" -"+inférieure)." +"garantir l'épaisseur verticale de la coque (couches solides " +"supérieure+inférieure)." msgid "Internal bridge support thickness" msgstr "Épaisseur du support interne du pont" @@ -13934,12 +13960,12 @@ msgstr "" "Voulez-vous le réécrire ?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index 4c8f0f257..ecf8d3f74 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5556,6 +5556,12 @@ msgstr "Állapot" msgid "Update" msgstr "Frissítés" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s hiba" @@ -5943,15 +5949,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6021,9 +6021,8 @@ msgstr "" "letöltsd az esetlegesen elérhető frissített rendszerbeállításokat." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6324,9 +6323,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Megtarthatod az új projekt módosított beállításait, vagy elvetheted őket" @@ -6473,11 +6469,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6533,9 +6524,29 @@ msgid "Custom supports and color painting were removed before repairing." msgstr "" "Az egyedi támaszok és a színfestés eltávolításra került a javítást előtt." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7338,11 +7349,6 @@ msgstr "küldés befejezve" msgid "Error code" msgstr "Hibakód" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7537,6 +7543,11 @@ msgstr "A név túl hosszú." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7873,8 +7884,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy " "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb " @@ -8541,6 +8552,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8604,6 +8620,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8613,9 +8635,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8675,6 +8695,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13761,12 +13787,12 @@ msgstr "" "Szeretnéd felülírni?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 2a0fa4ee5..b1dc66c38 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5565,6 +5565,12 @@ msgstr "Stato" msgid "Update" msgstr "Aggiorna" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "errore %s" @@ -5953,15 +5959,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6032,9 +6032,8 @@ msgstr "" "disponibile un aggiornamento dei preset di sistema." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6336,9 +6335,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "È possibile mantenere i preset modificati nel nuovo progetto o eliminarli" @@ -6486,11 +6482,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6547,9 +6538,29 @@ msgstr "" "I supporti personalizzati e la pittura a colori sono stati rimossi prima " "della riparazione." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7352,11 +7363,6 @@ msgstr "invio completato" msgid "Error code" msgstr "Codice di errore" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7549,6 +7555,11 @@ msgstr "La lunghezza del nome supera il limite." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7886,8 +7897,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -8557,6 +8568,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8620,6 +8636,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8629,9 +8651,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8691,6 +8711,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -9157,8 +9183,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Vuoi effettuare l'aggiornamento adesso? Puoi " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" -"\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " +"firmware\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -13820,8 +13846,8 @@ msgstr "" "Vuoi riscriverlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Rinomineremo i preset come \"Vendor Type Serial @printer selezionato\". \n" @@ -15801,12 +15827,13 @@ msgstr "" #~ "wiki.\n" #~ "\n" #~ "Di solito la calibrazione non è necessaria. Quando si avvia una stampa a " -#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del flusso" -#~ "\" selezionata nel menu di avvio della stampa, la stampante eseguirà la " -#~ "vecchia procedura, calibrando il filamento prima della stampa; Quando si " -#~ "avvia una stampa multicolore/materiale, la stampante utilizzerà il " -#~ "parametro di compensazione predefinito del filamento durante ogni cambio, " -#~ "che nella maggior parte dei casi avrà un buon risultato.\n" +#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del " +#~ "flusso\" selezionata nel menu di avvio della stampa, la stampante " +#~ "eseguirà la vecchia procedura, calibrando il filamento prima della " +#~ "stampa; Quando si avvia una stampa multicolore/materiale, la stampante " +#~ "utilizzerà il parametro di compensazione predefinito del filamento " +#~ "durante ogni cambio, che nella maggior parte dei casi avrà un buon " +#~ "risultato.\n" #~ "\n" #~ "Tieni presente che ci sono alcuni casi che renderanno il risultato della " #~ "calibrazione non affidabile: utilizzo di un piatto texture; il piatto non " @@ -18313,8 +18340,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" -#~ "\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " +#~ "pulizia\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index e1d2add86..e7ab96d19 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5448,6 +5448,12 @@ msgstr "デバイス状態" msgid "Update" msgstr "更新" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s エラー" @@ -5828,15 +5834,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -5906,9 +5906,8 @@ msgstr "" "update to system presets." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6201,9 +6200,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "変更したプリセットをプロジェクト内に保存するか、破棄もできます" @@ -6347,11 +6343,6 @@ msgstr "%sを送信しました、プリンターにて確認できます" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6406,9 +6397,29 @@ msgid "Custom supports and color painting were removed before repairing." msgstr "" "モデルを変更すると、ペイントデータ（サポートや色など）がリセットされます" +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7207,11 +7218,6 @@ msgstr "送信完了" msgid "Error code" msgstr "Error code" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7380,6 +7386,11 @@ msgstr "名称の長さが制限を超えています。" msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7710,8 +7721,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -8354,6 +8365,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8417,6 +8433,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8426,9 +8448,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8487,6 +8507,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13369,12 +13395,12 @@ msgstr "" "リライトしますか？" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index 7b5e3afa8..2d0ad741c 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5466,6 +5466,12 @@ msgstr "출력상황" msgid "Update" msgstr "업데이트" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s 오류" @@ -5847,15 +5853,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -5925,9 +5925,8 @@ msgstr "" "에 대한 업데이트가 있는지 확인하세요." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6224,9 +6223,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "새 프로젝트를 위해 수정된 프리셋을 유지할 수도 삭제할 수도 있습니다." @@ -6372,11 +6368,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6429,9 +6420,29 @@ msgstr "프린터로 보내기" msgid "Custom supports and color painting were removed before repairing." msgstr "커스텀 서포트와 컬러 페인팅은 오류수정 전에 제거되었습니다." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7231,11 +7242,6 @@ msgstr "보내기 완료" msgid "Error code" msgstr "오류 코드" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7415,6 +7421,11 @@ msgstr "이름 길이가 제한을 초과합니다." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7735,8 +7746,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋" "습니다. \n" @@ -8386,6 +8397,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8449,6 +8465,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8458,9 +8480,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8518,6 +8538,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13439,12 +13465,12 @@ msgstr "" "다시 작성하시겠습니까?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index 7838d1821..170f58d45 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5582,6 +5582,12 @@ msgstr "Status" msgid "Update" msgstr "Updaten" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s fout" @@ -5976,15 +5982,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6057,9 +6057,8 @@ msgstr "" "systeemvoorinstellingen." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6365,9 +6364,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Je kunt de gewijzigde presets behouden voor het nieuwe project of ze " @@ -6516,11 +6512,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6576,9 +6567,29 @@ msgid "Custom supports and color painting were removed before repairing." msgstr "" "Handmatig aangebrachte support en kleuren zijn verwijderd voor het repareren." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7394,11 +7405,6 @@ msgstr "versturen gelukt" msgid "Error code" msgstr "Foutcode" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7591,6 +7597,11 @@ msgstr "De lengte van de naam overschrijdt de limiet." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7756,9 +7767,10 @@ msgstr "" "Bedankt voor uw aankoop van een Bambu Lab-apparaat. Lees de algemene " "voorwaarden voordat u uw Bambu Lab apparaat gebruikt. Door te klikken om " "akkoord te gaan met het gebruik van uw Bambu Lab apparaat, gaat u akkoord " -"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de \"Voorwaarden" -"\"). Als u niet voldoet aan of akkoord gaat met het Privacybeleid van Bambu " -"Lab, maak dan geen gebruik van Bambu Lab apparatuur en diensten." +"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de " +"\"Voorwaarden\"). Als u niet voldoet aan of akkoord gaat met het " +"Privacybeleid van Bambu Lab, maak dan geen gebruik van Bambu Lab apparatuur " +"en diensten." msgid "and" msgstr "en" @@ -7928,8 +7940,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een " "„Timelapse Wipe Tower” toe te voegen \n" @@ -8602,6 +8614,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8665,6 +8682,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8674,9 +8697,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8736,6 +8757,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13843,12 +13870,12 @@ msgstr "" "Wil je het herschrijven?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 334c79df6..5e924b531 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -10,8 +10,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && ((n" -"%100<12 || n%100>14))) ? 1 : 2;\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && " +"((n%100<12 || n%100>14))) ? 1 : 2;\n" "X-Generator: Poedit 3.4.2\n" msgid "Supports Painting" @@ -5575,6 +5575,12 @@ msgstr "Status" msgid "Update" msgstr "Aktualizuj" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s błąd" @@ -5967,15 +5973,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6045,9 +6045,8 @@ msgstr "" "Studio, aby sprawdzić, czy są dostępne aktualizacje do ustawień systemowych." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6349,9 +6348,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Możesz zachować zmodyfikowane ustawienia dla nowego projektu lub je odrzucić" @@ -6498,11 +6494,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6558,9 +6549,29 @@ msgid "Custom supports and color painting were removed before repairing." msgstr "" "Niestandardowe podpory i malowanie kolorów zostały usunięte przed naprawą." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7373,11 +7384,6 @@ msgstr "wysłanie zakończone" msgid "Error code" msgstr "Kod błędu" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7565,6 +7571,11 @@ msgstr "Długość nazwy przekracza limit." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7897,8 +7908,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Podczas nagrywania timelapse'a bez głowicy zaleca się dodanie \"Timelaps - " "Wieża Czyszcząca\" \n" @@ -8569,6 +8580,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8632,6 +8648,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8641,9 +8663,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8703,6 +8723,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -11905,10 +11931,10 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar" -"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć " -"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na " -"rozsądnie niskim poziomie." +"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania " +"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może " +"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej " +"wartości na rozsądnie niskim poziomie." msgid "Slicing Mode" msgstr "Tryb cięcia" @@ -13801,8 +13827,8 @@ msgstr "" "Czy chcesz go zastąpić?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nazwa profilu zostanie zmieniona na \"Dostawca Typ Seria @nazwa drukarki, " diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index de6946b28..fcd361bd4 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5557,6 +5557,12 @@ msgstr "Estado" msgid "Update" msgstr "Atualização" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s erro" @@ -5945,15 +5951,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6023,9 +6023,8 @@ msgstr "" "para verificar se há uma atualização nas predefinições do sistema." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6328,9 +6327,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Você pode manter as predefinições modificadas no novo projeto ou descartá-las" @@ -6477,11 +6473,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6536,9 +6527,29 @@ msgid "Custom supports and color painting were removed before repairing." msgstr "" "Suportes personalizados e pintura colorida foram removidos antes do reparo." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7343,11 +7354,6 @@ msgstr "envio concluído" msgid "Error code" msgstr "Código de erro" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7539,6 +7545,11 @@ msgstr "O tamanho do nome excede o limite." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7879,8 +7890,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Ao gravar o timelapse sem o cabeçote de ferramenta, é recomendável adicionar " "uma “Timelapse Wipe Tower” \n" @@ -8548,6 +8559,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8611,6 +8627,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8620,9 +8642,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8682,6 +8702,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13782,8 +13808,8 @@ msgstr "" "Você quer reescrevê-lo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nós renomearíamos as predefinições como “Tipo de fornecedor Serial @printer " diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index 4e8360da3..e1575e906 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" -"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " +"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.5\n" msgid "Supports Painting" @@ -5696,6 +5696,12 @@ msgstr "Статус" msgid "Update" msgstr "Обновление" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "Ошибка %s" @@ -6093,15 +6099,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6172,9 +6172,8 @@ msgstr "" "наличие обновлений системных профилей." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6482,9 +6481,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - # ??? Изменённые профили можно сохранить в новом проекте или отказаться от сохранения. # ??? Изменённые профили можно сохранить в новом проекте или отклонить изменения. msgid "You can keep the modified presets to the new project or discard them" @@ -6635,11 +6631,6 @@ msgstr "Файл %s отправлен в память принтера и мо msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6702,9 +6693,29 @@ msgstr "Отправить на принтер" msgid "Custom supports and color painting were removed before repairing." msgstr "Пользовательские поддержки и раскраска были удалены перед починкой." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7564,11 +7575,6 @@ msgstr "отправка завершена" msgid "Error code" msgstr "Код ошибки" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7762,6 +7768,11 @@ msgstr "Длина имени превышает установленное ог msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -8106,8 +8117,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без видимости головы рекомендуется добавить «Черновая " "башня таймлапса». \n" @@ -8794,6 +8805,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8857,6 +8873,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8866,9 +8888,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8928,6 +8948,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -14248,8 +14274,8 @@ msgstr "" "Хотите перезаписать его?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index a01ed711d..3ead8c7b3 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5525,6 +5525,12 @@ msgstr "Status" msgid "Update" msgstr "Uppdatera" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s fel" @@ -5911,15 +5917,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -5989,9 +5989,8 @@ msgstr "" "för att kontrollera om det finns en uppdatering av system inställningarna." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6289,9 +6288,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Du kan behålla de modifierade inställningarna i det nya projektet eller " @@ -6440,11 +6436,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6496,9 +6487,29 @@ msgstr "Skicka till skrivare" msgid "Custom supports and color painting were removed before repairing." msgstr "Custom support och färgläggning raderades innan reparation." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7301,11 +7312,6 @@ msgstr "skicka slutförd" msgid "Error code" msgstr "Felkod" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7497,6 +7503,11 @@ msgstr "Namnlängden överskrider gränsen." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7830,8 +7841,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger " "till ett \"Timelapse Wipe Tower\".\n" @@ -8499,6 +8510,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8562,6 +8578,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8571,9 +8593,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8604,8 +8624,8 @@ msgstr "" msgid "" "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "" -"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt" -"\"." +"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per " +"objekt\"." msgid "" "You selected external and AMS filament at the same time in an extruder, you " @@ -8633,6 +8653,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13659,12 +13685,12 @@ msgstr "" "Vill du skriva om det?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -17632,9 +17658,9 @@ msgstr "" #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu " #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna " #~ "användningen av din Bambu Lab enhet godkänner du att följa " -#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor" -#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy " -#~ "ska du inte använda Bambu Labs utrustning och tjänster." +#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade " +#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs " +#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "Filament %s är för mjukt för att kunna användas med AMS" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index 181da5eb8..2bf646e1b 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: 2025-01-12 21:04+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -5563,6 +5563,12 @@ msgstr "Durum" msgid "Update" msgstr "Güncelle" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s hata" @@ -5956,15 +5962,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6034,9 +6034,8 @@ msgstr "" "Bambu Studio'yu güncelleyin veya Bambu Studio'yu yeniden başlatın." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6336,9 +6335,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "Değiştirilen ön ayarları yeni projede tutabilir veya silebilirsiniz" @@ -6489,11 +6485,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6551,9 +6542,29 @@ msgstr "Yazıcıya gönder" msgid "Custom supports and color painting were removed before repairing." msgstr "Tamir edilmeden önce özel destekler ve renkli boyalar kaldırıldı." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7390,11 +7401,6 @@ msgstr "gönderme tamamlandı" msgid "Error code" msgstr "Hata kodu" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7586,6 +7592,11 @@ msgstr "Ad uzunluğu sınırı aşıyor." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7920,8 +7931,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Araç başlığı olmadan timelapse kaydederken, bir \"Timelapse Wipe Tower\" " "eklenmesi önerilir.\n" @@ -8587,6 +8598,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8650,6 +8666,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8659,9 +8681,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8721,6 +8741,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "%1s malzemesini %2s nozul ile yazdırmak nozul hasarına neden olabilir." +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -9510,8 +9536,8 @@ msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." msgstr "" -"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye göre" -"\" yazdırma sırasını seçin." +"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye " +"göre\" yazdırma sırasını seçin." msgid "" "The spiral vase mode does not work when an object contains more than one " @@ -13826,8 +13852,8 @@ msgstr "" "Yeniden yazmak ister misin?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ön ayarları \"Satıcı Tipi Seri @seçtiğiniz yazıcı\" olarak yeniden " diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index fbef1871f..e01648c34 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -2784,8 +2784,8 @@ msgstr "Будь ласка, введіть допустиме значення #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" -"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах %.1f~" -"%.1f)" +"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах " +"%.1f~%.1f)" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing " @@ -5589,6 +5589,12 @@ msgstr "Статус" msgid "Update" msgstr "Оновлення" +msgid "Go to" +msgstr "" + +msgid "Later" +msgstr "" + #, c-format, boost-format msgid "%s error" msgstr "%s помилка" @@ -5980,15 +5986,9 @@ msgstr "" msgid "Right nozzle: %smm" msgstr "" -msgid "Please select a printer in 'Device' page first." -msgstr "" - msgid "Sync printer information" msgstr "" -msgid "The currently connected printer does not have two extruders." -msgstr "" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -6058,9 +6058,8 @@ msgstr "" "чи є оновлення для системи пресети." msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." +"Filament type and color information have been synchronized, but slot " +"information is not included." msgstr "" #, boost-format @@ -6365,9 +6364,6 @@ msgstr "" msgid "Sync now" msgstr "" -msgid "Later" -msgstr "" - msgid "You can keep the modified presets to the new project or discard them" msgstr "" "Ви можете зберегти змінені пресети у новому проекті або відмовитися від них" @@ -6516,11 +6512,6 @@ msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6580,9 +6571,29 @@ msgstr "" "Користувацькі підтримки та колірне фарбування були видалені перед " "відновленням." +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." +msgstr "" + +msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" @@ -7410,11 +7421,6 @@ msgstr "відправлення завершено" msgid "Error code" msgstr "Код помилки" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7603,6 +7609,11 @@ msgstr "Довжина імені перевищує обмеження." msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7941,8 +7952,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "При записі таймлапсу без інструментальної головки рекомендується додати " "“Timelapse Wipe Tower” \n" @@ -8613,6 +8624,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8676,6 +8692,12 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" + msgid "Advanced settings >" msgstr "" @@ -8685,9 +8707,7 @@ msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." +msgid "After being synced, this action cannot be undone." msgstr "" msgid "" @@ -8746,6 +8766,12 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "" @@ -13877,8 +13903,8 @@ msgstr "" "Чи бажаєте ви їх перезаписати?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, " diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 6ef06afa3..36799209a 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-24 17:42+0800\n" +"POT-Creation-Date: 2025-02-05 21:04+0800\n" "PO-Revision-Date: 2025-01-08 20:27+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -5408,6 +5408,12 @@ msgstr "设备状态" msgid "Update" msgstr "固件更新" +msgid "Go to" +msgstr "前往" + +msgid "Later" +msgstr "稍后再说" + #, c-format, boost-format msgid "%s error" msgstr "%s 错误" @@ -5785,15 +5791,9 @@ msgstr "左喷嘴：%smm" msgid "Right nozzle: %smm" msgstr "右喷嘴：%smm" -msgid "Please select a printer in 'Device' page first." -msgstr "请先在 \"设备 \"页面选择打印机。" - msgid "Sync printer information" msgstr "同步打印机信息" -msgid "The currently connected printer does not have two extruders." -msgstr "当前连接的打印机没有两个挤出机。" - msgid "" "The currently selected machine preset is inconsistent with the connected " "printer type.\n" @@ -5864,12 +5864,9 @@ msgstr "" "Studio，以检查是否有系统预设的更新。" msgid "" -"\n" -"Material and color information have been synchronized, but slot information " -"is not included." -msgstr "" -"\n" -"材料和颜色信息已同步，但不包括槽位信息。" +"Filament type and color information have been synchronized, but slot " +"information is not included." +msgstr "耗材类型和颜色信息已同步，但不包括槽位信息。" #, boost-format msgid "Do you want to save changes to \"%1%\"?" @@ -6153,9 +6150,6 @@ msgstr "" msgid "Sync now" msgstr "立即同步" -msgid "Later" -msgstr "稍后再说" - msgid "You can keep the modified presets to the new project or discard them" msgstr "您可以保留修改的预设到新项目中或者忽略这些修改" @@ -6302,11 +6296,6 @@ msgstr "文件%s已经发送到打印机的存储空间，可以在打印机上 msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "未设置喷嘴类型。请先设置喷嘴，然后重试。" -msgid "" -"Printer not connected. Please connect or choose a printer on the Device page " -"and try again." -msgstr "打印机未连接。请在“设备”页面上连接或选择打印机，然后重试。" - msgid "" "Unable to perform boolean operation on model meshes. You may fix the meshes " "and try again." @@ -6360,11 +6349,31 @@ msgstr "发送到打印机" msgid "Custom supports and color painting were removed before repairing." msgstr "自定义的支撑和涂色在模型修复之前将被清除。" +#, c-format, boost-format msgid "" -"The currently selected machine preset is inconsistent with the connected " -"printer type.Please change device or currently selected machine.\n" +"Printer not connected. Please go to the device page to connect an %s printer " +"before syncing." +msgstr "未连接打印机，请前往设备页连接一台 %s 后再同步。" + +#, c-format, boost-format +msgid "" +"The currently connected printer on the device page is not an %s. Please " +"switch to an %s before syncing." +msgstr "设备页当前连接的打印机不是 %s ，无法同步，请切换成 %s 后再同步。" + +msgid "" +"There are no filaments on the printer. Please load the filaments on the " +"printer first." +msgstr "打印机上没有任何耗材，请先去机器上放置耗材。" + +msgid "" +"The filaments on the printer are all unknown types. Please go to the printer " +"screen or software device page to set the filament type." msgstr "" -"当前选择的机器预设与连接的打印机类型不一致。请更改设备或当前选择的机器。\n" +"打印机上的耗材均为未知类型，请先去打印机屏幕或者软件设备页面设置耗材类型。" + +msgid "Device Page" +msgstr "设备页" msgid "Synchronize AMS Filament Information" msgstr "同步AMS耗材信息" @@ -7161,11 +7170,6 @@ msgstr "发送完成" msgid "Error code" msgstr "错误代码" -msgid "" -"Tips: If you changed your nozzle of your printer lately, Please go to " -"'Device -> Printer parts' to change your nozzle setting." -msgstr "注意: 如果你最近更换了喷嘴，请去“设备-打印机零件”更改设置" - #, c-format, boost-format msgid "" "The nozzle flow setting of %snozzle(%s) doesn't match with the slicing " @@ -7344,6 +7348,11 @@ msgstr "名称长度超过限制。" msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "如果使用最优分组可多节省%dg耗材和%d次换料" +msgid "" +"Tips: If you changed your nozzle of your printer lately, Please go to " +"'Device -> Printer parts' to change your nozzle setting." +msgstr "注意: 如果你最近更换了喷嘴，请去“设备-打印机零件”更改设置" + #, c-format, boost-format msgid "" "The current nozzle diameter (Left: %.1fmm Right: %.1fmm) doesn't match with " @@ -7664,8 +7673,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" @@ -8305,6 +8314,11 @@ msgstr "" msgid "—> " msgstr "" +msgid "" +"Printer not connected. Please connect or choose a printer on the Device page " +"and try again." +msgstr "打印机未连接。请在“设备”页面上连接或选择打印机，然后重试。" + msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament " "presets.\n" @@ -8374,6 +8388,14 @@ msgid "" "Only synchronize filament type and color, not including AMS slot information." msgstr "仅同步耗材类型和颜色，不包含AMS槽位信息。" +msgid "" +"Replace the project filaments list sequentially based on printer filaments. " +"And unused printer filaments will be automatically added to the end of the " +"list." +msgstr "" +"使用打印机内的耗材，依次替换项目耗材列表。未使用的打印机耗材将自动添加至列表" +"末尾。" + msgid "Advanced settings >" msgstr "高级设置 >" @@ -8383,10 +8405,8 @@ msgstr "未使用的AMS耗材也添加到耗材列表。" msgid "Automatically merge the same colors in the model after mapping." msgstr "匹配后自动合并模型中的相同颜色。" -msgid "" -"The project's filament list will be directly replaced with the information " -"of all filaments from the printer. This action cannot be undone." -msgstr "项目耗材列表将直接被来自打印机的所有的耗材信息替换。此操作不可撤销。" +msgid "After being synced, this action cannot be undone." +msgstr "同步后，此操作不可撤销。" msgid "" "After being synced, the project's filament presets and colors will be " @@ -8442,6 +8462,15 @@ msgstr "" msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "%1s材料在使用%2s的喷嘴打印时,可能会导致喷嘴损坏。" +msgid "" +"Upper half area: Original\n" +"Lower half area: Filament in AMS\n" +"And you cannot click it to modify" +msgstr "" +"上半部分：原项目耗材\n" +"下半部分：AMS中的耗材\n" +"您不能单击它进行修改" + msgid "Successfully synchronized nozzle and AMS number information." msgstr "喷嘴信息和AMS数量同步成功。" @@ -13158,8 +13187,8 @@ msgstr "" "你想重写预设吗" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n" @@ -14536,6 +14565,30 @@ msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" +#~ msgid "" +#~ "Material and color information have been synchronized, but slot " +#~ "information is not included." +#~ msgstr "材料和颜色信息已同步，但不包括槽位信息。" + +#~ msgid "Please select a printer in 'Device' page first." +#~ msgstr "请先在 \"设备 \"页面选择打印机。" + +#~ msgid "The currently connected printer does not have two extruders." +#~ msgstr "当前连接的打印机没有两个挤出机。" + +#~ msgid "" +#~ "The currently selected machine preset is inconsistent with the connected " +#~ "printer type.Please change device or currently selected machine.\n" +#~ msgstr "" +#~ "当前选择的机器预设与连接的打印机类型不一致。请更改设备或当前选择的机器。\n" + +#~ msgid "" +#~ "The project's filament list will be directly replaced with the " +#~ "information of all filaments from the printer. This action cannot be " +#~ "undone." +#~ msgstr "" +#~ "项目耗材列表将直接被来自打印机的所有的耗材信息替换。此操作不可撤销。" + #, c-format, boost-format #~ msgid "Only the %s with external filament spool can print TPU" #~ msgstr "只能使用%s的外挂料打印TPU" @@ -21077,8 +21130,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host upload" -#~ "\"" +#~ "You have the following presets with saved options for \"Print Host " +#~ "upload\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 01e097c1c..8b19a5be1 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ diff --git a/resources/web/data/text.js b/resources/web/data/text.js index 986366b83..e7014949c 100644 --- a/resources/web/data/text.js +++ b/resources/web/data/text.js @@ -57,10 +57,10 @@ var LangText={ "t62": "Others", "t63": "After changing the region, your account will be logged out. Please log in again later.", "t64": "Bambu Network plug-in", - "t65": "Sending print job via WLAN", + "t65": "Sending print job via WLAN or cloud service", "t66": "Full remote control", - "t67": "Liveview streaming", - "t68": "User data synchronization", + "t67": "Liveview streaming and printer status monitor", + "t68": "Cloud synchronization for slicing configuration", "t69": "Install Bambu Network plug-in", "t70": "", "t71": "Downloading", @@ -177,10 +177,10 @@ var LangText={ "t62": "其他", "t63": "切换区域后，你的账号会被登出。稍后请重新登录。", "t64": "Bambu网络插件", - "t65": "通过WLAN发送打印任务", + "t65": "通过局域网或云服务发送打印任务", "t66": "强大的远程控制功能", - "t67": "实时视频流", - "t68": "用户数据同步", + "t67": "实时视频流和打印机状态管理", + "t68": "通过云端同步切片设置", "t69": "安装Bambu网络插件", "t70": "", "t71": "正在下载", @@ -313,10 +313,10 @@ var LangText={ "t62": "その他", "t63": "地域を変更したら、一回サインアウトされます。もう一度サインインしてください", "t64": "Bambu ネットワークプラグイン", - "t65": "WiFi経由で造形タスクを送信します", + "t65": "印刷ジョブをWLANまたはクラウドサービスで送信する", "t66": "リモートコントロール", - "t67": "ライブビュー", - "t68": "ユーザデータ同期", + "t67": "ライブビューストリーミングとプリンター状態モニタリング", + "t68": "スライシング設定のクラウド同期", "t69": "Bambu ネットワークプラグインをインストール", "t70": "", "t71": "ダウンロード中", @@ -432,10 +432,10 @@ var LangText={ "t62": "Altri", "t63": "Dopo aver cambiato la regione, il tuo account verrà disconnesso. Effettua nuovamente il login più tardi.", "t64": "Plug-in di Bambu Network", - "t65": "Invio di lavori di stampa tramite WLAN", + "t65": "Invio del lavoro di stampa tramite WLAN o servizio cloud", "t66": "Controllo remoto completo", - "t67": "Streaming Liveview", - "t68": "Sincronizzazione dei dati dell'utente", + "t67": "Streaming Liveview e monitoraggio dello stato della stampante", + "t68": "Sincronizzazione cloud per la configurazione del taglio", "t69": "Installa il plug-in di Bambu Network", "t70": "", "t71": "Download in corso", @@ -551,10 +551,10 @@ var LangText={ "t62": "Autres", "t63": "Après avoir modifié la région, votre compte sera déconnecté. Veuillez vous reconnecter plus tard.", "t64": "Plug-in Réseau Bambu", - "t65": "Envoi de travaux d'impression via WLAN", + "t65": "Envoi de tâches d'impression via WLAN ou service cloud", "t66": "Contrôle complet à distance", - "t67": "Diffusion en direct", - "t68": "Synchronisation des données utilisateur", + "t67": "Streaming Liveview et surveillance de l'état de l'imprimante", + "t68": "Synchronisation cloud pour la configuration de tranchage", "t69": "Installer le plug-in Réseau Bambu", "t70": "", "t71": "Téléchargement en cours", @@ -670,10 +670,10 @@ var LangText={ "t62": "Andere", "t63": "Nach Änderung der Region wird Ihr Konto abgemeldet. Bitte melden Sie sich später wieder an.", "t64": "Bambu Network-Plug-In", - "t65": "Senden von Druckaufträgen über WLAN", + "t65": "Senden von Druckaufgaben über WLAN oder Cloud Service", "t66": "Vollständige Fernsteuerung", - "t67": "Liveview-Streaming", - "t68": "Synchronisation von Benutzerdaten", + "t67": "Liveview-Streaming und Druckerstatusüberwachung", + "t68": "Cloud-Synchronisierung für die Schneidkonfiguration", "t69": "Installieren Sie das Bambu Network-Plug-In", "t70": "", "t71": "Herunterladen", @@ -789,10 +789,10 @@ var LangText={ "t62": "Egyéb", "t63": "A régió megváltoztatása után ki lesz jelentkezve a fiókodból. Kérjük, jelentkezzen be újra később.", "t64": "Bambu Network plug-in", - "t65": "Nyomtatási munka küldése WLAN keresztül", + "t65": "Nyomtatási feladat küldése WLAN vagy felhőszolgáltatáson keresztül", "t66": "Teljes távvezérlés", - "t67": "Élőkép közvetítés", - "t68": "Felhasználói adatszinkronizáció", + "t67": "Liveview-közvetítés és nyomtató állapotmonitorozás", + "t68": "Félezési konfiguráció felhőszinkronizációja", "t69": "Bambu Network plug-in telepítése", "t70": "", "t71": "Letöltés", @@ -908,10 +908,10 @@ var LangText={ "t62": "Otros", "t63": "Después de cambiar la región, se cerrará la sesión de su cuenta. Por favor, vuelva a iniciar sesión más tarde.", "t64": "Complemento de red de Bambu", - "t65": "Envío de trabajos de impresión a través de WLAN", + "t65": "Envío de trabajo de impresión a través de WLAN o servicio en la nube", "t66": "Control remoto completo", - "t67": "Transmisión en vivo", - "t68": "Sincronización de datos de usuario", + "t67": "Streaming de Liveview y monitorización del estado de la impresora", + "t68": "Sincronización en la nube para la configuración de rebanado", "t69": "Instalar complemento de red de Bambu", "t70": "", "t71": "Descargando", @@ -1027,10 +1027,10 @@ var LangText={ "t62": "Andra", "t63": "Efter att ha ändrat regionen kommer ditt konto att loggas ut. Logga in igen senare.", "t64": "Bambu Network plug-in", - "t65": "Skicka utskriftsjobb via WLAN", + "t65": "Skicka utskriftsjobb via WLAN eller molntjänst", "t66": "Fullständig fjärrstyrning", - "t67": "Liveview streaming", - "t68": "Synchronisering av användardata", + "t67": "Liveview-strömning och statusövervakning av skrivaren", + "t68": "Molnsynkronisering för skärkonfiguration", "t69": "Installera Bambu Network plug-in", "t70": "", "t71": "Laddar ner", @@ -1146,10 +1146,10 @@ var LangText={ "t62": "Ostatní", "t63": "Po změně regionu bude váš účet odhlášen. Prosím přihlašte se znovu později.", "t64": "Zásuvný modul Bambu Network", - "t65": "Odesílání tiskových úloh přes WLAN", + "t65": "Odesílání tiskové úlohy přes WLAN nebo cloudovou službu", "t66": "Plná vzdálená kontrola", - "t67": "Živé zobrazení ve streamu", - "t68": "Synchronizace uživatelských dat", + "t67": "Streamování Liveview a sledování stavu tiskárny", + "t68": "Cloudová synchronizace konfigurace řezání", "t69": "Instalovat zásuvný modul Bambu Network", "t70": "", "t71": "Stahování", @@ -1265,10 +1265,10 @@ var LangText={ "t62": "Andere", "t63": "Na het wijzigen van de regio wordt uw account uitgelogd. Log later opnieuw in.", "t64": "Bambu Network-plug-in", - "t65": "Afdruktaak verzenden via WLAN", + "t65": "Afdruktaak verzenden via WLAN of cloud service", "t66": "Volledige externe bediening", - "t67": "Liveview-streaming", - "t68": "Gebruikersgegevenssynchronisatie", + "t67": "Liveview-streaming en printerstatusmonitoring", + "t68": "Cloudsynchronisatie voor slicingconfiguratie", "t69": "Bambu Network-plug-in installeren", "t70": "", "t71": "Downloaden", @@ -1384,10 +1384,10 @@ var LangText={ "t62": "Інший", "t63": "Після зміни регіону відбудеться вихід з акаунта. Будь ласка, увійдіть пізніше.", "t64": "Мережевий плагін Bambu", - "t65": "Відправлення завдання на друк через WLAN", + "t65": "Відправка завдань друку через WLAN або хмарну службу", "t66": "Повне дистанційне керування", - "t67": "Перегляд прямої трансляції з камери", - "t68": "Синхронізація даних користувача", + "t67": "Стрімінг Liveview та моніторинг стану принтера", + "t68": "Хмарна синхронізація конфігурації різання", "t69": "Встановити мережевий плагін Bambu", "t70": "", "t71": "Завантаження", @@ -1503,10 +1503,10 @@ var LangText={ "t62": "Другой", "t63": "После смены региона произойдёт выход из аккаунта. Пожалуйста, войдите позже.", "t64": "Сетевой плагин Bambu", - "t65": "Отправка задания на печать через WLAN", + "t65": "Отправка задания на печать через WLAN или облаконную службу", "t66": "Полное дистанционное управление", - "t67": "Просмотр прямой трансляции с камеры", - "t68": "Синхронизация данных пользователя", + "t67": "Стриминг Liveview и мониторинг состояния принтера", + "t68": "Облачная синхронизация конфигурации среза", "t69": "Установить сетевой плагин Bambu", "t70": "", "t71": "Загрузка", @@ -1622,10 +1622,10 @@ var LangText={ "t62": "Others", "t63": "Bölgeyi değiştirdikten sonra hesabınızdan çıkış yapılacaktır. Lütfen daha sonra tekrar giriş yapın.", "t64": "Bambu Ağı eklentisi", - "t65": "Yazdırma işi WLAN aracılığıyla gönderiliyor", + "t65": "WLAN veya bulut hizmeti üzerinden yazdırma işi gönderme", "t66": "Tam uzaktan kontrol", - "t67": "Canlı görüntü akışı", - "t68": "Kullanıcı veri senkronizasyonu", + "t67": "Liveview akışı ve yazıcı durumu izlemesi", + "t68": "Dilimleme yapılandırması için bulut eşitleme", "t69": "Bambu Ağı eklentisini yükleyin", "t70": "", "t71": "İndiriliyor", @@ -1741,10 +1741,10 @@ var LangText={ "t62": "Outras", "t63": "Após alterar sua região, sua conta será desconectada. Por favor conecte-se novamente mais tarde.", "t64": "Bambu Network plug-in", - "t65": "Enviando trabalho de impressão via WLAN", + "t65": "Enviando trabalho de impressão via WLAN ou serviço de nuvem", "t66": "Controle remoto total", - "t67": "Transmissão Ao Vivo", - "t68": "Sincronização de Dados do Usuário", + "t67": "Streaming do Liveview e monitoramento do status da impressora", + "t68": "Sincronização em nuvem para configuração de fatiamento", "t69": "Instalar Bambu Network plug-in", "t70": "", "t71": "Baixando", @@ -1860,10 +1860,10 @@ var LangText={ "t62": "기타", "t63": "지역을 변경한 후, 귀하의 계정은 로그아웃됩니다. 나중에 다시 로그인해 주세요.", "t64": "Bambu Network 플러그인", - "t65": "WLAN을 통한 프린팅 작업 보내기", + "t65": "WLAN 또는 클라우드 서비스를 통해 인쇄 작업 보내기", "t66": "완전한 원격 제어", - "t67": "라이브뷰 스트리밍", - "t68": "사용자 데이터 동기화", + "t67": "라이브뷰 스트리밍 및 프린터 상태 모니터링", + "t68": "슬라이싱 설정의 클라우드 동기화", "t69": "Bambu Network 플러그인 설치", "t70": "", "t71": "다운로드 중", @@ -1979,10 +1979,10 @@ var LangText={ "t62": "Inne", "t63": "Po zmianie regionu Twoje konto zostanie wylogowane. Zaloguj się ponownie później.", "t64": "Wtyczka Bambu Network", - "t65": "Wysyłanie zadania drukowania przez WLAN", + "t65": "Wysyłanie zadania drukowania przez WLAN lub usługę cloud", "t66": "Pełne zdalne sterowanie", - "t67": "Transmisja strumieniowa Liveview", - "t68": "Synchronizacja danych użytkownika", + "t67": "Strumieniowe przesyłanie Liveview i monitorowanie stanu drukarki", + "t68": "Synchronizacja chmurowa konfiguracji krojenia", "t69": "Zainstaluj wtyczkę Bambu Network", "t70": "", "t71": "Pobieranie", diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp index c6af7411b..cb949aeea 100644 --- a/src/slic3r/GUI/Plater.cpp +++ b/src/slic3r/GUI/Plater.cpp @@ -3027,7 +3027,7 @@ void Sidebar::sync_ams_list(bool is_from_big_sync_btn) } } auto badge_combox_filament = [](PlaterPresetComboBox *c) { - auto tip = _L("\nMaterial and color information have been synchronized, but slot information is not included."); + auto tip = _L("Filament type and color information have been synchronized, but slot information is not included."); c->SetToolTip(tip); c->ShowBadge(true); };