diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 93383c0e6..fac35d5e0 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -5918,8 +5918,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -8779,6 +8779,66 @@ msgid "" "value for this parameter is 15" msgstr "" +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "" @@ -10305,8 +10365,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index d41feeffd..ce28d3d22 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -6206,8 +6206,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -9334,6 +9334,66 @@ msgstr "" "Tato hodnota je vyjádřena jako procento průměru aktuální trysky. Výchozí " "hodnota tohoto parametru je 15" +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Rychlost čištění" @@ -11074,8 +11134,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" @@ -11806,8 +11866,8 @@ msgid "" msgstr "" "Plochou na podložku\n" "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z " -"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku" -"\" nebo stiskněte klávesu F." +"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na " +"podložku\" nebo stiskněte klávesu F." #: resources/data/hints.ini: [hint:Object List] msgid "" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 88c960476..e864e32e5 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6358,13 +6358,13 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" -"\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" +">\"Timelapse Wischturm\" wählen." msgid "Line width" msgstr "Breite der Linie" @@ -9614,6 +9614,66 @@ msgstr "" "Extruderdurchmessers ausgedrückt. Der Standardwert für diesen Parameter ist " "15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Wischgeschwindigkeit" @@ -11446,12 +11506,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" @@ -12747,8 +12807,8 @@ msgstr "" #~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " #~ "automatically load or unload filiament." #~ msgstr "" -#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder \"Entladen" -#~ "\", um automatisch Filament zu laden oder zu entladen." +#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder " +#~ "\"Entladen\", um automatisch Filament zu laden oder zu entladen." #~ msgid "No arrangable objects are selected." #~ msgstr "Es sind keine anordnungsfähigen Objekte ausgewählt." diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index 2f673a4e7..3013d5c17 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6225,13 +6225,13 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgid "Line width" msgstr "Line width" @@ -9386,6 +9386,66 @@ msgstr "" "This amount as a percentage of the current extruder diameter. The default " "value for this parameter is 15" +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Wipe speed" @@ -11146,12 +11206,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index c8151c0f4..35c385d80 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6337,8 +6337,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir " "una «Torre de purga para el timelapse» \n" @@ -9596,6 +9596,66 @@ msgstr "" "Esta cantidad se expresa como un porcentaje del diámetro actual del " "extrusor. El valor por defecto de este parámetro es 15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Velocidad de limpieza" @@ -11409,12 +11469,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index 58bf9a486..e0855b60a 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -6349,8 +6349,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé " "d’ajouter une \"Tour de nettoyage timelapse\".\n" @@ -6484,9 +6484,9 @@ msgid "" "Bed temperature when cool plate is installed. Value 0 means the filament " "does not support to print on the Cool Plate" msgstr "" -"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate" -"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être " -"imprimé sur le plateau froid." +"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool " +"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas " +"être imprimé sur le plateau froid." msgid "Engineering Plate" msgstr "Plaque Engineering" @@ -7717,8 +7717,8 @@ msgstr "" msgid "The prime tower is not supported in \"By object\" print." msgstr "" -"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par objet" -"\"." +"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par " +"objet\"." msgid "" "The prime tower is not supported when adaptive layer height is on. It " @@ -8352,8 +8352,8 @@ msgid "" "thickness (top+bottom solid layers)" msgstr "" "Ajoutez du remplissage solide à proximité des surfaces inclinées pour " -"garantir l'épaisseur verticale de la coque (couches solides supérieure" -"+inférieure)." +"garantir l'épaisseur verticale de la coque (couches solides " +"supérieure+inférieure)." msgid "Internal bridge support thickness" msgstr "Épaisseur du support interne du pont" @@ -9625,6 +9625,66 @@ msgstr "" "Cette quantité est exprimée en pourcentage du diamètre de la buse actuelle. " "La valeur par défaut de ce paramètre est 15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Vitesse d'essuyage" @@ -11454,12 +11514,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index 60c7abb33..edfed9a9f 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6288,8 +6288,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy " "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb " @@ -9520,6 +9520,66 @@ msgstr "" "Ezt a mennyiséget az extruder aktuális átmérőjének százalékában fejezzük ki. " "Ennek a paraméternek az alapértelmezett értéke 15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Törlés sebessége" @@ -11320,12 +11380,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 56dc94787..b3a48ee8f 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6299,8 +6299,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -7309,8 +7309,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Si desidera aggiornare ora? È possibile " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" -"\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " +"firmware\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -9556,6 +9556,66 @@ msgstr "" "Questa quantità è espressa in percentuale del diametro attuale " "dell'estrusore. Il valore predefinito per questo parametro è 15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Velocità di cancellazione" @@ -11377,12 +11437,12 @@ msgstr "" "Vuoi riscriverlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" @@ -14897,8 +14957,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" -#~ "\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " +#~ "pulizia\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 575679379..bc52d72b3 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6136,8 +6136,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -9216,6 +9216,66 @@ msgstr "" "This amount is expressed as a percentage of the current extruder diameter. " "The default value for this parameter is 15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Wipe speed" @@ -10945,12 +11005,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index a37df2dde..352b07c06 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -6191,8 +6191,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋" "습니다. \n" @@ -9317,6 +9317,66 @@ msgstr "" "This amount as a percentage of the current extruder diameter. The default " "value for this parameter is 15" +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Wipe speed" @@ -11055,12 +11115,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index 8810fd908..99b600821 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6342,8 +6342,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een " "„Timelapse Wipe Tower” toe te voegen \n" @@ -9607,6 +9607,66 @@ msgstr "" "Deze hoeveelheid wordt uitgedrukt als een percentage van de huidige diameter " "van de extruder. De standaardwaarde voor deze parameter is 15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Veegsnelheid" @@ -11427,12 +11487,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index 9b8436bcc..dade4de5c 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -6368,8 +6368,8 @@ msgstr "Ignorar" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Ao gravar o timelapse sem o cabeçote de ferramenta, é recomendável adicionar " "uma “Timelapse Wipe Tower” \n" @@ -9663,6 +9663,66 @@ msgstr "" "uma porcentagem do diâmetro atual da extrusora. O valor padrão para este " "parâmetro é 15" +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Velocidade de limpeza" @@ -11482,8 +11542,8 @@ msgstr "" "Você quer reescrevê-lo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nós renomearíamos as predefinições como “Tipo de fornecedor Serial @printer " diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index e0e7378a6..955333a1a 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio v1.8.0 Beta\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: 2023-11-12 22:00+0700\n" "Last-Translator: Andylg \n" "Language-Team: \n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" -"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " +"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.4.1\n" msgid "Supports Painting" @@ -6367,8 +6367,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без видимости головы рекомендуется добавить «Черновая " "башня таймлапса». \n" @@ -9613,6 +9613,66 @@ msgstr "" "Это величина задаётся в процентах от текущего диаметра сопла. Значение по " "умолчанию - 15%." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Скорость очистки" @@ -11432,8 +11492,8 @@ msgstr "" "Хотите перезаписать его?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index da7b154d8..aa1a6c2a5 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6260,8 +6260,8 @@ msgstr "Ignore" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger " "till ett \"Timelapse Wipe Tower\".\n" @@ -9445,6 +9445,66 @@ msgstr "" "Denna mängd uttrycks som en procentandel av den aktuella extruder diametern. " "Standardvärdet för denna parameter är 15." +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Hastighet för avtorkning" @@ -11228,12 +11288,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgid "Create Printer/Nozzle" @@ -12689,9 +12749,9 @@ msgstr "" #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu " #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna " #~ "användningen av din Bambu Lab enhet godkänner du att följa " -#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor" -#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy " -#~ "ska du inte använda Bambu Labs utrustning och tjänster." +#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade " +#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs " +#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster." #~ msgid "The configuration package is changed in previous Config Guide" #~ msgstr "Konfigurations paketet är ändrat i föregående Kofigurations Guide" diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index dd868d6f9..97c409382 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -6294,8 +6294,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "При записі таймлапсу без інструментальної головки рекомендується додати " "“Timelapse Wipe Tower” \n" @@ -9504,6 +9504,66 @@ msgstr "" "Ця кількість виражена у відсотках від поточного діаметра екструдера. За " "замовчуванням, цей параметр має значення 15" +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "Швидкість очищення" @@ -11314,8 +11374,8 @@ msgstr "" "Чи бажаєте ви їх перезаписати?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, " diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 6e70d467a..d2418d6e9 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-03-20 14:36+0800\n" +"POT-Creation-Date: 2024-03-21 10:52+0800\n" "PO-Revision-Date: 2024-02-23 20:10+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1017,7 +1017,7 @@ msgid "Torus" msgstr "圆环" msgid "Rounded Rectangle" -msgstr "" +msgstr "圆角矩形" msgid "Bambu Cube" msgstr "Bambu方块" @@ -2954,7 +2954,7 @@ msgid "Total time" msgstr "总时间" msgid "Total cost" -msgstr "" +msgstr "总成本" msgid "up to" msgstr "达到" @@ -3144,7 +3144,7 @@ msgid "Spacing" msgstr "间距" msgid "0 means auto spacing." -msgstr "" +msgstr "0 表示自动间距。" msgid "Auto rotate for arrangement" msgstr "自动旋转以优化自动摆放效果" @@ -5036,22 +5036,23 @@ msgid "" "Unable to perform boolean operation on model meshes. Only positive parts " "will be kept. You may fix the meshes and try agian." msgstr "" +"无法对模型网格执行布尔运算。只保留正体积部分。您可以修复网格后再试一次。" #, boost-format msgid "Reason: part \"%1%\" is empty." -msgstr "" +msgstr "原因：零件\"%1%\"为空。" #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." -msgstr "" +msgstr "原因：零件\"%1%\"没有封闭一个体积。" #, boost-format msgid "Reason: part \"%1%\" has self intersection." -msgstr "" +msgstr "原因：零件\"%1%\"有自相交。" #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." -msgstr "" +msgstr "原因：零件\"%1%\"与另一个零件没有交集。" msgid "" "Negative parts detected. Would you like to perform mesh boolean before " @@ -6089,8 +6090,8 @@ msgstr "忽略" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" @@ -9082,6 +9083,66 @@ msgstr "" "为了减少闭环挤出中接缝的可见性，循环会被中断并缩短指定的长度。\n" "这个长度是当前挤出器直径的百分比。该参数的默认值为15。" +msgid "Scarf joint seam (beta)" +msgstr "" + +msgid "Use scarf joint to minimize seam visibility and increase seam strength." +msgstr "" + +msgid "Conditional scarf joint" +msgstr "" + +msgid "" +"Apply scarf joints only to smooth perimeters where traditional seams do not " +"conceal the seams at sharp corners effectively." +msgstr "" + +msgid "Conditional angle threshold" +msgstr "" + +msgid "" +"This option sets the threshold angle for applying a conditional scarf joint " +"seam.\n" +"If the maximum angle within the perimeter loop exceeds this value " +"(indicating the absence of sharp corners), a scarf joint seam will be used. " +"The default value is 155°." +msgstr "" + +msgid "Scarf start height" +msgstr "" + +msgid "" +"Start height of the scarf.\n" +"This amount can be specified in millimeters or as a percentage of the " +"current layer height. The default value for this parameter is 0." +msgstr "" + +msgid "Scarf around entire wall" +msgstr "" + +msgid "The scarf extends to the entire length of the wall." +msgstr "" + +msgid "Scarf length" +msgstr "" + +msgid "" +"Length of the scarf. Setting this parameter to zero effectively disables the " +"scarf." +msgstr "" + +msgid "Scarf steps" +msgstr "" + +msgid "Minimum number of segments of each scarf." +msgstr "" + +msgid "Scarf joint for inner walls" +msgstr "" + +msgid "Use scarf joint for inner walls as well." +msgstr "" + msgid "Wipe speed" msgstr "擦拭速度" @@ -9235,10 +9296,10 @@ msgid "XY separation between an object and its support" msgstr "模型和支撑之间XY分离距离" msgid "Support/object first layer gap" -msgstr "" +msgstr "支撑/对象首层间距" msgid "XY separation between an object and its support at the first layer." -msgstr "" +msgstr "物体与其首层支撑之间的 XY 间隔。" msgid "Pattern angle" msgstr "模式角度" @@ -9846,7 +9907,7 @@ msgstr "" "XY尺寸补偿不能与涂色功能一起使用。" msgid "Generating supports" -msgstr "" +msgstr "生成支撑" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." @@ -10756,8 +10817,8 @@ msgstr "" "你想重写预设吗" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you selected" -"\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you " +"selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n" @@ -17232,8 +17293,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host upload" -#~ "\"" +#~ "You have the following presets with saved options for \"Print Host " +#~ "upload\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 0bee9b8fb..ab8c18812 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ