diff --git a/resources/profiles/Anker.json b/resources/profiles/Anker.json
index f23017941..52a54bb59 100644
--- a/resources/profiles/Anker.json
+++ b/resources/profiles/Anker.json
@@ -147,4 +147,4 @@
             "sub_path": "machine/Anker M5C 0.4 nozzle.json"
         }
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json
index 1b0c2b1ce..ab14598cd 100644
--- a/resources/profiles/Anycubic.json
+++ b/resources/profiles/Anycubic.json
@@ -128,7 +128,6 @@
             "name": "fdm_filament_asa",
             "sub_path": "filament/fdm_filament_asa.json"
         },
-        
         {
             "name": "fdm_filament_pa",
             "sub_path": "filament/fdm_filament_pa.json"
@@ -228,4 +227,4 @@
             "sub_path": "machine/Anycubic Kobra 2 0.4 nozzle.json"
         }
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 0f5cf3849..b8bba4cba 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.07.00.18",
+    "version": "01.07.00.19",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [
@@ -22,8 +22,8 @@
             "sub_path": "machine/Bambu Lab P1S.json"
         },
         {
-            "name": "Bambu Lab N1",
-            "sub_path": "machine/Bambu Lab N1.json"
+            "name": "Bambu Lab A1 mini",
+            "sub_path": "machine/Bambu Lab A1 mini.json"
         }
     ],
     "process_list": [
@@ -71,94 +71,6 @@
             "name": "fdm_process_bbl_0.28",
             "sub_path": "process/fdm_process_bbl_0.28.json"
         },
-        {
-            "name": "0.08mm Extra Fine @BBL X1C",
-            "sub_path": "process/0.08mm Extra Fine @BBL X1C.json"
-        },
-        {
-            "name": "0.12mm Fine @BBL X1C",
-            "sub_path": "process/0.12mm Fine @BBL X1C.json"
-        },
-        {
-            "name": "0.16mm Optimal @BBL X1C",
-            "sub_path": "process/0.16mm Optimal @BBL X1C.json"
-        },
-        {
-            "name": "0.20mm Standard @BBL X1C",
-            "sub_path": "process/0.20mm Standard @BBL X1C.json"
-        },
-        {
-            "name": "0.20mm Strength @BBL X1C",
-            "sub_path": "process/0.20mm Strength @BBL X1C.json"
-        },
-        {
-            "name": "0.24mm Draft @BBL X1C",
-            "sub_path": "process/0.24mm Draft @BBL X1C.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @BBL X1C",
-            "sub_path": "process/0.28mm Extra Draft @BBL X1C.json"
-        },
-        {
-            "name": "0.10mm Standard @BBL X1C 0.2 nozzle",
-            "sub_path": "process/0.10mm Standard @BBL X1C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @BBL X1C 0.6 nozzle",
-            "sub_path": "process/0.30mm Standard @BBL X1C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.30mm Standard @BBL X1 0.6 nozzle",
-            "sub_path": "process/0.30mm Standard @BBL X1 0.6 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @BBL X1C 0.8 nozzle",
-            "sub_path": "process/0.40mm Standard @BBL X1C 0.8 nozzle.json"
-        },
-        {
-            "name": "0.40mm Standard @BBL X1 0.8 nozzle",
-            "sub_path": "process/0.40mm Standard @BBL X1 0.8 nozzle.json"
-        },
-        {
-            "name": "0.10mm Standard @BBL P1P 0.2 nozzle",
-            "sub_path": "process/0.10mm Standard @BBL P1P 0.2 nozzle.json"
-        },
-        {
-            "name": "0.20mm Standard @BBL P1P",
-            "sub_path": "process/0.20mm Standard @BBL P1P.json"
-        },
-        {
-            "name": "0.30mm Standard @BBL P1P 0.6 nozzle",
-            "sub_path": "process/0.30mm Standard @BBL P1P 0.6 nozzle.json"
-        },
-        {
-            "name": "0.08mm Extra Fine @BBL P1P",
-            "sub_path": "process/0.08mm Extra Fine @BBL P1P.json"
-        },
-        {
-            "name": "0.12mm Fine @BBL P1P",
-            "sub_path": "process/0.12mm Fine @BBL P1P.json"
-        },
-        {
-            "name": "0.16mm Optimal @BBL P1P",
-            "sub_path": "process/0.16mm Optimal @BBL P1P.json"
-        },
-        {
-            "name": "0.20mm Strength @BBL P1P",
-            "sub_path": "process/0.20mm Strength @BBL P1P.json"
-        },
-        {
-            "name": "0.24mm Draft @BBL P1P",
-            "sub_path": "process/0.24mm Draft @BBL P1P.json"
-        },
-        {
-            "name": "0.28mm Extra Draft @BBL P1P",
-            "sub_path": "process/0.28mm Extra Draft @BBL P1P.json"
-        },
-        {
-            "name": "0.40mm Standard @BBL P1P 0.8 nozzle",
-            "sub_path": "process/0.40mm Standard @BBL P1P 0.8 nozzle.json"
-        },
         {
             "name": "fdm_process_bbl_0.06_nozzle_0.2",
             "sub_path": "process/fdm_process_bbl_0.06_nozzle_0.2.json"
@@ -175,22 +87,6 @@
             "name": "fdm_process_bbl_0.14_nozzle_0.2",
             "sub_path": "process/fdm_process_bbl_0.14_nozzle_0.2.json"
         },
-        {
-            "name": "0.06mm Standard @BBL X1C 0.2 nozzle",
-            "sub_path": "process/0.06mm Standard @BBL X1C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.08mm Standard @BBL X1C 0.2 nozzle",
-            "sub_path": "process/0.08mm Standard @BBL X1C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.12mm Standard @BBL X1C 0.2 nozzle",
-            "sub_path": "process/0.12mm Standard @BBL X1C 0.2 nozzle.json"
-        },
-        {
-            "name": "0.14mm Standard @BBL X1C 0.2 nozzle",
-            "sub_path": "process/0.14mm Standard @BBL X1C 0.2 nozzle.json"
-        },
         {
             "name": "fdm_process_bbl_0.18_nozzle_0.6",
             "sub_path": "process/fdm_process_bbl_0.18_nozzle_0.6.json"
@@ -207,22 +103,6 @@
             "name": "fdm_process_bbl_0.42_nozzle_0.6",
             "sub_path": "process/fdm_process_bbl_0.42_nozzle_0.6.json"
         },
-        {
-            "name": "0.18mm Standard @BBL X1C 0.6 nozzle",
-            "sub_path": "process/0.18mm Standard @BBL X1C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.24mm Standard @BBL X1C 0.6 nozzle",
-            "sub_path": "process/0.24mm Standard @BBL X1C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.36mm Standard @BBL X1C 0.6 nozzle",
-            "sub_path": "process/0.36mm Standard @BBL X1C 0.6 nozzle.json"
-        },
-        {
-            "name": "0.42mm Standard @BBL X1C 0.6 nozzle",
-            "sub_path": "process/0.42mm Standard @BBL X1C 0.6 nozzle.json"
-        },
         {
             "name": "fdm_process_bbl_0.24_nozzle_0.8",
             "sub_path": "process/fdm_process_bbl_0.24_nozzle_0.8.json"
@@ -239,6 +119,150 @@
             "name": "fdm_process_bbl_0.56_nozzle_0.8",
             "sub_path": "process/fdm_process_bbl_0.56_nozzle_0.8.json"
         },
+        {
+            "name": "0.08mm Extra Fine @BBL X1C",
+            "sub_path": "process/0.08mm Extra Fine @BBL X1C.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @BBL P1P",
+            "sub_path": "process/0.08mm Extra Fine @BBL P1P.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @BBL A1M",
+            "sub_path": "process/0.08mm Extra Fine @BBL A1M.json"
+        },
+        {
+            "name": "0.10mm Standard @BBL X1C 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "0.10mm Standard @BBL P1P 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @BBL P1P 0.2 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @BBL X1C 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @BBL X1C 0.8 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @BBL X1 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @BBL X1 0.8 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @BBL P1P 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @BBL P1P 0.8 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @BBL X1C 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @BBL X1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @BBL X1 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @BBL X1 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @BBL P1P 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @BBL P1P 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Strength @BBL X1C 0.6 nozzle",
+            "sub_path": "process/0.30mm Strength @BBL X1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.12mm Fine @BBL X1C",
+            "sub_path": "process/0.12mm Fine @BBL X1C.json"
+        },
+        {
+            "name": "0.12mm Fine @BBL P1P",
+            "sub_path": "process/0.12mm Fine @BBL P1P.json"
+        },
+        {
+            "name": "0.12mm Fine @BBL A1M",
+            "sub_path": "process/0.12mm Fine @BBL A1M.json"
+        },
+        {
+            "name": "0.16mm Optimal @BBL X1C",
+            "sub_path": "process/0.16mm Optimal @BBL X1C.json"
+        },
+        {
+            "name": "0.16mm Optimal @BBL P1P",
+            "sub_path": "process/0.16mm Optimal @BBL P1P.json"
+        },
+        {
+            "name": "0.16mm Optimal @BBL A1M",
+            "sub_path": "process/0.16mm Optimal @BBL A1M.json"
+        },
+        {
+            "name": "0.20mm Standard @BBL X1C",
+            "sub_path": "process/0.20mm Standard @BBL X1C.json"
+        },
+        {
+            "name": "0.20mm Strength @BBL X1C",
+            "sub_path": "process/0.20mm Strength @BBL X1C.json"
+        },
+        {
+            "name": "0.20mm Standard @BBL P1P",
+            "sub_path": "process/0.20mm Standard @BBL P1P.json"
+        },
+        {
+            "name": "0.20mm Strength @BBL P1P",
+            "sub_path": "process/0.20mm Strength @BBL P1P.json"
+        },
+        {
+            "name": "0.24mm Draft @BBL X1C",
+            "sub_path": "process/0.24mm Draft @BBL X1C.json"
+        },
+        {
+            "name": "0.24mm Draft @BBL P1P",
+            "sub_path": "process/0.24mm Draft @BBL P1P.json"
+        },
+        {
+            "name": "0.24mm Draft @BBL A1M",
+            "sub_path": "process/0.24mm Draft @BBL A1M.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @BBL X1C",
+            "sub_path": "process/0.28mm Extra Draft @BBL X1C.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @BBL P1P",
+            "sub_path": "process/0.28mm Extra Draft @BBL P1P.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @BBL A1M",
+            "sub_path": "process/0.28mm Extra Draft @BBL A1M.json"
+        },
+        {
+            "name": "0.06mm Standard @BBL X1C 0.2 nozzle",
+            "sub_path": "process/0.06mm Standard @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "0.08mm Standard @BBL X1C 0.2 nozzle",
+            "sub_path": "process/0.08mm Standard @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Standard @BBL X1C 0.2 nozzle",
+            "sub_path": "process/0.12mm Standard @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "0.14mm Standard @BBL X1C 0.2 nozzle",
+            "sub_path": "process/0.14mm Standard @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "0.18mm Standard @BBL X1C 0.6 nozzle",
+            "sub_path": "process/0.18mm Standard @BBL X1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Standard @BBL X1C 0.6 nozzle",
+            "sub_path": "process/0.24mm Standard @BBL X1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Standard @BBL X1C 0.6 nozzle",
+            "sub_path": "process/0.36mm Standard @BBL X1C 0.6 nozzle.json"
+        },
+        {
+            "name": "0.42mm Standard @BBL X1C 0.6 nozzle",
+            "sub_path": "process/0.42mm Standard @BBL X1C 0.6 nozzle.json"
+        },
         {
             "name": "0.24mm Standard @BBL X1C 0.8 nozzle",
             "sub_path": "process/0.24mm Standard @BBL X1C 0.8 nozzle.json"
@@ -256,24 +280,24 @@
             "sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json"
         },
         {
-            "name": "0.30mm Strength @BBL X1C 0.6 nozzle",
-            "sub_path": "process/0.30mm Strength @BBL X1C 0.6 nozzle.json"
+            "name": "0.10mm Standard @BBL A1M 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @BBL A1M 0.2 nozzle.json"
         },
         {
-            "name": "0.10mm Standard @BBL N1 0.2 nozzle",
-            "sub_path": "process/0.10mm Standard @BBL N1 0.2 nozzle.json"
+            "name": "0.40mm Standard @BBL A1M 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @BBL A1M 0.8 nozzle.json"
         },
         {
-            "name": "0.40mm Standard @BBL N1 0.8 nozzle",
-            "sub_path": "process/0.40mm Standard @BBL N1 0.8 nozzle.json"
+            "name": "0.30mm Standard @BBL A1M 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @BBL A1M 0.6 nozzle.json"
         },
         {
-            "name": "0.30mm Standard @BBL N1 0.6 nozzle",
-            "sub_path": "process/0.30mm Standard @BBL N1 0.6 nozzle.json"
+            "name": "0.20mm Standard @BBL A1M",
+            "sub_path": "process/0.20mm Standard @BBL A1M.json"
         },
         {
-            "name": "0.20mm Standard @BBL N1",
-            "sub_path": "process/0.20mm Standard @BBL N1.json"
+            "name": "0.20mm Strength @BBL A1M",
+            "sub_path": "process/0.20mm Strength @BBL A1M.json"
         }
     ],
     "filament_list": [
@@ -537,6 +561,14 @@
             "name": "Bambu PLA Matte @BBL P1P",
             "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P.json"
         },
+        {
+            "name": "Bambu PLA Matte @BBL A1M",
+            "sub_path": "filament/Bambu PLA Matte @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu PLA Basic @BBL X1C",
             "sub_path": "filament/Bambu PLA Basic @BBL X1C.json"
@@ -561,6 +593,14 @@
             "name": "Bambu PLA Basic @BBL P1P",
             "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P.json"
         },
+        {
+            "name": "Bambu PLA Basic @BBL A1M",
+            "sub_path": "filament/Bambu PLA Basic @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu PLA Tough @BBL X1C",
             "sub_path": "filament/Bambu PLA Tough @BBL X1C.json"
@@ -581,6 +621,14 @@
             "name": "Bambu PLA Tough @BBL P1P",
             "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P.json"
         },
+        {
+            "name": "Bambu PLA Tough @BBL A1M",
+            "sub_path": "filament/Bambu PLA Tough @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu PLA Marble @BBL X1",
             "sub_path": "filament/Bambu PLA Marble @BBL X1.json"
@@ -593,6 +641,10 @@
             "name": "Bambu PLA Marble @BBL P1P",
             "sub_path": "filament/P1P/Bambu PLA Marble @BBL P1P.json"
         },
+        {
+            "name": "Bambu PLA Marble @BBL A1M",
+            "sub_path": "filament/Bambu PLA Marble @BBL A1M.json"
+        },
         {
             "name": "Bambu PLA Sparkle @BBL X1",
             "sub_path": "filament/Bambu PLA Sparkle @BBL X1.json"
@@ -605,6 +657,10 @@
             "name": "Bambu PLA Sparkle @BBL P1P",
             "sub_path": "filament/P1P/Bambu PLA Sparkle @BBL P1P.json"
         },
+        {
+            "name": "Bambu PLA Sparkle @BBL A1M",
+            "sub_path": "filament/Bambu PLA Sparkle @BBL A1M.json"
+        },
         {
             "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json"
@@ -625,6 +681,14 @@
             "name": "Bambu PLA Metal @BBL P1P",
             "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P.json"
         },
+        {
+            "name": "Bambu PLA Metal @BBL A1M",
+            "sub_path": "filament/Bambu PLA Metal @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu PLA Silk @BBL X1",
             "sub_path": "filament/Bambu PLA Silk @BBL X1.json"
@@ -645,6 +709,14 @@
             "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle",
             "sub_path": "filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "Bambu PLA Silk @BBL A1M",
+            "sub_path": "filament/Bambu PLA Silk @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu Support W @BBL X1C",
             "sub_path": "filament/Bambu Support W @BBL X1C.json"
@@ -665,6 +737,14 @@
             "name": "Bambu Support W @BBL P1P",
             "sub_path": "filament/P1P/Bambu Support W @BBL P1P.json"
         },
+        {
+            "name": "Bambu Support W @BBL A1M",
+            "sub_path": "filament/Bambu Support W @BBL A1M.json"
+        },
+        {
+            "name": "Bambu Support W @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu Support W @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "eSUN PLA+ @BBL X1C",
             "sub_path": "filament/eSUN PLA+ @BBL X1C.json"
@@ -685,6 +765,14 @@
             "name": "eSUN PLA+ @BBL P1P 0.2 nozzle",
             "sub_path": "filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "eSUN PLA+ @BBL A1M",
+            "sub_path": "filament/eSUN PLA+ @BBL A1M.json"
+        },
+        {
+            "name": "eSUN PLA+ @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "PolyTerra PLA @BBL X1C",
             "sub_path": "filament/PolyTerra PLA @BBL X1C.json"
@@ -697,6 +785,14 @@
             "name": "PolyTerra PLA @BBL P1P",
             "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P.json"
         },
+        {
+            "name": "PolyTerra PLA @BBL A1M",
+            "sub_path": "filament/PolyTerra PLA @BBL A1M.json"
+        },
+        {
+            "name": "PolyTerra PLA @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "PolyLite PLA @BBL X1C",
             "sub_path": "filament/PolyLite PLA @BBL X1C.json"
@@ -709,6 +805,14 @@
             "name": "PolyLite PLA @BBL P1P",
             "sub_path": "filament/P1P/PolyLite PLA @BBL P1P.json"
         },
+        {
+            "name": "PolyLite PLA @BBL A1M",
+            "sub_path": "filament/PolyLite PLA @BBL A1M.json"
+        },
+        {
+            "name": "PolyLite PLA @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/PolyLite PLA @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Generic PLA",
             "sub_path": "filament/Generic PLA.json"
@@ -725,6 +829,14 @@
             "name": "Generic PLA @BBL P1P",
             "sub_path": "filament/P1P/Generic PLA @BBL P1P.json"
         },
+        {
+            "name": "Generic PLA @BBL A1M",
+            "sub_path": "filament/Generic PLA @BBL A1M.json"
+        },
+        {
+            "name": "Generic PLA @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Generic PLA Silk",
             "sub_path": "filament/Generic PLA Silk.json"
@@ -733,6 +845,10 @@
             "name": "Generic PLA Silk @BBL P1P",
             "sub_path": "filament/P1P/Generic PLA Silk @BBL P1P.json"
         },
+        {
+            "name": "Generic PLA Silk @BBL A1M",
+            "sub_path": "filament/Generic PLA Silk @BBL A1M.json"
+        },
         {
             "name": "Generic PLA-CF",
             "sub_path": "filament/Generic PLA-CF.json"
@@ -741,6 +857,10 @@
             "name": "Generic PLA-CF @BBL P1P",
             "sub_path": "filament/P1P/Generic PLA-CF @BBL P1P.json"
         },
+        {
+            "name": "Generic PLA-CF @BBL A1M",
+            "sub_path": "filament/Generic PLA-CF @BBL A1M.json"
+        },
         {
             "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle",
             "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json"
@@ -757,6 +877,14 @@
             "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle",
             "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json"
         },
+        {
+            "name": "Bambu PLA-CF @BBL A1M",
+            "sub_path": "filament/Bambu PLA-CF @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle",
+            "sub_path": "filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json"
+        },
         {
             "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json"
@@ -773,6 +901,14 @@
             "name": "Bambu Support For PLA @BBL P1P",
             "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P.json"
         },
+        {
+            "name": "Bambu Support For PLA @BBL A1M",
+            "sub_path": "filament/Bambu Support For PLA @BBL A1M.json"
+        },
+        {
+            "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu PLA Aero @BBL X1",
             "sub_path": "filament/Bambu PLA Aero @BBL X1.json"
@@ -785,6 +921,10 @@
             "name": "Bambu PLA Aero @BBL P1P",
             "sub_path": "filament/P1P/Bambu PLA Aero @BBL P1P.json"
         },
+        {
+            "name": "Bambu PLA Aero @BBL A1M",
+            "sub_path": "filament/Bambu PLA Aero @BBL A1M.json"
+        },
         {
             "name": "Overture PLA @BBL X1C",
             "sub_path": "filament/Overture PLA @BBL X1C.json"
@@ -797,6 +937,10 @@
             "name": "Overture PLA @BBL P1P",
             "sub_path": "filament/Overture PLA @BBL P1P.json"
         },
+        {
+            "name": "Overture PLA @BBL A1M",
+            "sub_path": "filament/Overture PLA @BBL A1M.json"
+        },
         {
             "name": "Overture Matte PLA @BBL X1C",
             "sub_path": "filament/Overture Matte PLA @BBL X1C.json"
@@ -809,6 +953,10 @@
             "name": "Overture Matte PLA @BBL P1P",
             "sub_path": "filament/Overture Matte PLA @BBL P1P.json"
         },
+        {
+            "name": "Overture Matte PLA @BBL A1M",
+            "sub_path": "filament/Overture Matte PLA @BBL A1M.json"
+        },
         {
             "name": "Generic PLA High Speed @BBL X1C",
             "sub_path": "filament/Generic PLA High Speed @BBL X1C.json"
@@ -817,6 +965,10 @@
             "name": "Generic PLA High Speed @BBL P1P",
             "sub_path": "filament/Generic PLA High Speed @BBL P1P.json"
         },
+        {
+            "name": "Generic PLA High Speed @BBL A1M",
+            "sub_path": "filament/Generic PLA High Speed @BBL A1M.json"
+        },
         {
             "name": "Bambu TPU 95A @BBL X1C",
             "sub_path": "filament/Bambu TPU 95A @BBL X1C.json"
@@ -829,6 +981,14 @@
             "name": "Bambu TPU 95A @BBL P1P",
             "sub_path": "filament/P1P/Bambu TPU 95A @BBL P1P.json"
         },
+        {
+            "name": "Bambu TPU 95A @BBL A1M",
+            "sub_path": "filament/Bambu TPU 95A @BBL A1M.json"
+        },
+        {
+            "name": "Generic TPU @BBL A1M",
+            "sub_path": "filament/Generic TPU @BBL A1M.json"
+        },
         {
             "name": "Bambu PETG Basic @BBL X1C",
             "sub_path": "filament/Bambu PETG Basic @BBL X1C.json"
@@ -865,6 +1025,14 @@
             "name": "Generic PETG @BBL P1P 0.2 nozzle",
             "sub_path": "filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "Generic PETG @BBL A1M",
+            "sub_path": "filament/Generic PETG @BBL A1M.json"
+        },
+        {
+            "name": "Generic PETG @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Generic PETG @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Generic PETG-CF @BBL X1C",
             "sub_path": "filament/Generic PETG-CF @BBL X1C.json"
@@ -889,6 +1057,10 @@
             "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle",
             "sub_path": "filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json"
         },
+        {
+            "name": "Bambu PETG-CF @BBL A1M",
+            "sub_path": "filament/Bambu PETG-CF @BBL A1M.json"
+        },
         {
             "name": "PolyLite PETG @BBL X1C",
             "sub_path": "filament/PolyLite PETG @BBL X1C.json"
@@ -897,6 +1069,10 @@
             "name": "PolyLite PETG @BBL P1P",
             "sub_path": "filament/PolyLite PETG @BBL P1P.json"
         },
+        {
+            "name": "PolyLite PETG @BBL A1M",
+            "sub_path": "filament/PolyLite PETG @BBL A1M.json"
+        },
         {
             "name": "Bambu ABS @BBL X1C",
             "sub_path": "filament/Bambu ABS @BBL X1C.json"
@@ -1041,6 +1217,14 @@
             "name": "Generic PVA @BBL P1P",
             "sub_path": "filament/P1P/Generic PVA @BBL P1P.json"
         },
+        {
+            "name": "Generic PVA @BBL A1M",
+            "sub_path": "filament/Generic PVA @BBL A1M.json"
+        },
+        {
+            "name": "Generic PVA @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Generic PVA @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu Support G @BBL X1C",
             "sub_path": "filament/Bambu Support G @BBL X1C.json"
@@ -1085,6 +1269,14 @@
             "name": "Generic HIPS @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Generic HIPS @BBL X1C 0.2 nozzle.json"
         },
+        {
+            "name": "Generic HIPS @BBL A1M",
+            "sub_path": "filament/Generic HIPS @BBL A1M.json"
+        },
+        {
+            "name": "Generic HIPS @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Generic HIPS @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "PolyTerra PLA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json"
@@ -1109,6 +1301,10 @@
             "name": "Overture PLA @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Overture PLA @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "Overture PLA @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Overture PLA @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Overture Matte PLA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json"
@@ -1117,6 +1313,10 @@
             "name": "Overture Matte PLA @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "Overture Matte PLA @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle",
             "sub_path": "filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json"
@@ -1125,6 +1325,30 @@
             "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle",
             "sub_path": "filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle",
+            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle",
+            "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json"
+        },
+        {
+            "name": "Generic PETG-CF @BBL A1M",
+            "sub_path": "filament/P1P/Generic PETG-CF @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle",
+            "sub_path": "filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json"
+        },
         {
             "name": "PolyLite PETG @BBL X1C 0.2 nozzle",
             "sub_path": "filament/PolyLite PETG @BBL X1C 0.2 nozzle.json"
@@ -1133,6 +1357,10 @@
             "name": "PolyLite PETG @BBL P1P 0.2 nozzle",
             "sub_path": "filament/PolyLite PETG @BBL P1P 0.2 nozzle.json"
         },
+        {
+            "name": "PolyLite PETG @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/PolyLite PETG @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "PolyLite ABS @BBL X1C 0.2 nozzle",
             "sub_path": "filament/PolyLite ABS @BBL X1C 0.2 nozzle.json"
@@ -1141,18 +1369,6 @@
             "name": "PolyLite ABS @BBL P1P 0.2 nozzle",
             "sub_path": "filament/PolyLite ABS @BBL P1P 0.2 nozzle.json"
         },
-        {
-            "name": "Bambu PETG Basic @BBL N1 0.4 nozzle",
-            "sub_path": "filament/Bambu PETG Basic @BBL N1 0.4 nozzle.json"
-        },
-        {
-            "name": "Bambu PETG Basic @BBL N1 0.2 nozzle",
-            "sub_path": "filament/Bambu PETG Basic @BBL N1 0.2 nozzle.json"
-        },
-        {
-            "name": "Bambu PETG Basic @BBL N1 0.8 nozzle",
-            "sub_path": "filament/Bambu PETG Basic @BBL N1 0.8 nozzle.json"
-        },
         {
             "name": "Bambu PC @BBL P1S",
             "sub_path": "filament/Bambu PC @BBL P1S.json"
@@ -1212,12 +1428,8 @@
             "sub_path": "machine/Bambu Lab P1S 0.4 nozzle.json"
         },
         {
-            "name": "Bambu Lab N1 0.4 nozzle",
-            "sub_path": "machine/Bambu Lab N1 0.4 nozzle.json"
-        },
-        {
-            "name": "Bambu Lab N2 0.4 nozzle",
-            "sub_path": "machine/Bambu Lab N2 0.4 nozzle.json"
+            "name": "Bambu Lab A1 mini 0.4 nozzle",
+            "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle.json"
         },
         {
             "name": "Bambu Lab X1 Carbon 0.2 nozzle",
@@ -1268,16 +1480,16 @@
             "sub_path": "machine/Bambu Lab P1S 0.8 nozzle.json"
         },
         {
-            "name": "Bambu Lab N1 0.2 nozzle",
-            "sub_path": "machine/Bambu Lab N1 0.2 nozzle.json"
+            "name": "Bambu Lab A1 mini 0.2 nozzle",
+            "sub_path": "machine/Bambu Lab A1 mini 0.2 nozzle.json"
         },
         {
-            "name": "Bambu Lab N1 0.6 nozzle",
-            "sub_path": "machine/Bambu Lab N1 0.6 nozzle.json"
+            "name": "Bambu Lab A1 mini 0.6 nozzle",
+            "sub_path": "machine/Bambu Lab A1 mini 0.6 nozzle.json"
         },
         {
-            "name": "Bambu Lab N1 0.8 nozzle",
-            "sub_path": "machine/Bambu Lab N1 0.8 nozzle.json"
+            "name": "Bambu Lab A1 mini 0.8 nozzle",
+            "sub_path": "machine/Bambu Lab A1 mini 0.8 nozzle.json"
         }
     ]
 }
diff --git a/resources/profiles/BBL/Bambu LAb A1 mini_cover.png b/resources/profiles/BBL/Bambu LAb A1 mini_cover.png
new file mode 100644
index 000000000..f224e40b8
Binary files /dev/null and b/resources/profiles/BBL/Bambu LAb A1 mini_cover.png differ
diff --git a/resources/profiles/BBL/bbl-3dp-N1.stl b/resources/profiles/BBL/bbl-3dp-A1M.stl
similarity index 100%
rename from resources/profiles/BBL/bbl-3dp-N1.stl
rename to resources/profiles/BBL/bbl-3dp-A1M.stl
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json
index 9ab4f1513..3949e1851 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB00_00",
     "name": "Bambu ABS @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json
index 371647908..70613a34f 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB00_01",
     "name": "Bambu ABS @BBL X1C 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "22"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json
index f28bb2a42..3fb2c7f62 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB00",
     "name": "Bambu ABS @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "22"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json
index 011785259..a185e7cf8 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFB00",
     "name": "Bambu ABS @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "GFB00",
+    "instantiation": "false",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json
index d54ae3a6e..abaa62c35 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
-    "name": "Bambu ASA @BBL X1 0.2 nozzle",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu ASA @BBL X1 0.2 nozzle",
     "inherits": "Bambu ASA @base",
+    "from": "system",
     "setting_id": "GFSB01_03",
+    "instantiation": "true",
     "fan_max_speed": [
         "80"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json
index 208bd79d1..e98e02789 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
-    "name": "Bambu ASA @BBL X1 0.6 nozzle",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu ASA @BBL X1 0.6 nozzle",
     "inherits": "Bambu ASA @base",
+    "from": "system",
     "setting_id": "GFSB01_04",
+    "instantiation": "true",
     "fan_max_speed": [
         "90"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json
index aea32b4cc..1253bff71 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
@@ -1,16 +1,16 @@
 {
-    "name": "Bambu ASA @BBL X1C 0.2 nozzle",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu ASA @BBL X1C 0.2 nozzle",
     "inherits": "Bambu ASA @base",
+    "from": "system",
     "setting_id": "GFSB01_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab P1S 0.2 nozzle"
+        "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json
index e5be657ca..b3c53e095 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
@@ -1,15 +1,18 @@
 {
-    "name": "Bambu ASA @BBL X1C 0.4 nozzle",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu ASA @BBL X1C 0.4 nozzle",
     "inherits": "Bambu ASA @base",
+    "from": "system",
     "setting_id": "GFSB01_02",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab P1P 0.4 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json
index 8fc456b2e..5693a2c1d 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
-    "name": "Bambu ASA @BBL X1C",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu ASA @BBL X1C",
     "inherits": "Bambu ASA @base",
+    "from": "system",
     "setting_id": "GFSB01_00",
+    "instantiation": "true",
     "fan_min_speed": [
         "25"
     ],
@@ -16,6 +16,7 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
-        "Bambu Lab P1S 0.8 nozzle"
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1P 0.6 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA @base.json b/resources/profiles/BBL/filament/Bambu ASA @base.json
index f3c174af5..f2fc943a0 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @base.json	
@@ -1,16 +1,16 @@
 {
-    "name": "Bambu ASA @base",
     "type": "filament",
-    "instantiation": "false",
-    "from": "system",
+    "name": "Bambu ASA @base",
     "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB01",
+    "instantiation": "false",
     "filament_density": [
         "1.05"
     ],
     "filament_cost": [
         "31.99"
     ],
-    "filament_id": "GFB01",
     "nozzle_temperature_initial_layer": [
         "270"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json
index 573802070..1ee5a243a 100644
--- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSN00",
     "name": "Bambu PA-CF @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PA-CF @base",
+    "from": "system",
+    "setting_id": "GFSN00",
+    "instantiation": "true",
     "nozzle_temperature_initial_layer": [
         "290"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json
index 98842dc10..2788ee1bd 100644
--- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFN03",
     "name": "Bambu PA-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFN03",
+    "instantiation": "false",
     "filament_cost": [
         "84.99"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json
index fd0b12425..3d81a495a 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSN05_02",
     "name": "Bambu PA6-CF @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PA6-CF @base",
+    "from": "system",
+    "setting_id": "GFSN05_02",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json
index 5fdacfe59..697101fff 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFN05",
     "name": "Bambu PA6-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFN05",
+    "instantiation": "false",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json
index 8841f7949..fbf45ad62 100644
--- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSN04",
     "name": "Bambu PAHT-CF @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PAHT-CF @base",
+    "from": "system",
+    "setting_id": "GFSN04",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json
index 67182ecc5..0f5dcfb74 100644
--- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFN04",
     "name": "Bambu PAHT-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFN04",
+    "instantiation": "false",
     "fan_max_speed": [
         "30"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json
index b7efca74c..4190eb183 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_06",
     "name": "Bambu PC @BBL P1S 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @BBL X1C 0.2 nozzle",
+    "from": "system",
+    "setting_id": "GFSC00_06",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json
index e90462b30..67bb02d3f 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_08",
     "name": "Bambu PC @BBL P1S 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @BBL X1C 0.6 nozzle",
+    "from": "system",
+    "setting_id": "GFSC00_08",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json
index a7724f862..144a5cae3 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_07",
     "name": "Bambu PC @BBL P1S 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @BBL X1C 0.8 nozzle",
+    "from": "system",
+    "setting_id": "GFSC00_07",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json
index 41bfa2346..ea192bfba 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_05",
     "name": "Bambu PC @BBL P1S",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSC00_05",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json
index 6afdd4352..31d13f48e 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_02",
     "name": "Bambu PC @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @base",
+    "from": "system",
+    "setting_id": "GFSC00_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json
index 360b0465b..3b5399efa 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_01",
     "name": "Bambu PC @BBL X1C 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @base",
+    "from": "system",
+    "setting_id": "GFSC00_01",
+    "instantiation": "true",
     "nozzle_temperature": [
         "260"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json
index f067ceab0..b1cc742c2 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_00",
     "name": "Bambu PC @BBL X1C 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @base",
+    "from": "system",
+    "setting_id": "GFSC00_00",
+    "instantiation": "true",
     "nozzle_temperature": [
         "260"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json
index 047a71fe8..7ee213146 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00",
     "name": "Bambu PC @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @base",
+    "from": "system",
+    "setting_id": "GFSC00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle"
diff --git a/resources/profiles/BBL/filament/Bambu PC @base.json b/resources/profiles/BBL/filament/Bambu PC @base.json
index a9038a4b9..001f7c94d 100644
--- a/resources/profiles/BBL/filament/Bambu PC @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFC00",
     "name": "Bambu PC @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pc",
+    "from": "system",
+    "filament_id": "GFC00",
+    "instantiation": "false",
     "filament_vendor": [
         "Bambu Lab"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json
index 3550e947c..09f2147d6 100644
--- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFST01",
     "name": "Bambu PET-CF @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PET-CF @base",
+    "from": "system",
+    "setting_id": "GFST01",
+    "instantiation": "true",
     "reduce_fan_stop_start_freq": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json
index a5aa8cc47..9cfc605c3 100644
--- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json	
@@ -1,18 +1,24 @@
 {
     "type": "filament",
-    "filament_id": "GFT01",
     "name": "Bambu PET-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pet",
-    "temperature_vitrification": [
-        "185"
+    "from": "system",
+    "filament_id": "GFT01",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
     ],
-    "overhang_fan_threshold": [
-        "0%"
+    "cool_plate_temp_initial_layer": [
+        "0"
     ],
-    "overhang_fan_speed": [
-        "40"
+    "eng_plate_temp": [
+        "80"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "80"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
     ],
     "fan_max_speed": [
         "30"
@@ -20,67 +26,61 @@
     "fan_min_speed": [
         "10"
     ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "slow_down_layer_time": [
-        "2"
-    ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "80"
-    ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "80"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
-    "required_nozzle_HRC": [
-        "40"
-    ],
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
-    "filament_type": [
-        "PET-CF"
-    ],
     "filament_cost": [
         "84.99"
     ],
     "filament_density": [
         "1.29"
     ],
-    "nozzle_temperature_range_low": [
-        "260"
+    "filament_max_volumetric_speed": [
+        "8"
     ],
-    "nozzle_temperature_range_high": [
-        "290"
+    "filament_type": [
+        "PET-CF"
     ],
-    "nozzle_temperature_initial_layer": [
-        "270"
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
     ],
     "nozzle_temperature": [
         "270"
     ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "temperature_vitrification": [
+        "185"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}"
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json
similarity index 73%
rename from resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.2 nozzle.json
rename to resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json
index 4884856cb..6553473d1 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json	
@@ -1,14 +1,14 @@
 {
     "type": "filament",
-    "setting_id": "GFSG00_04",
-    "name": "Bambu PETG Basic @BBL N1 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
+    "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle",
     "inherits": "Bambu PETG Basic @BBL X1C 0.2 nozzle",
+    "from": "system",
+    "setting_id": "GFSG00_04",
+    "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
     ],
     "compatible_printers": [
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab A1 mini 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json
similarity index 76%
rename from resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.4 nozzle.json
rename to resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json
index 5a6d23766..837e060fe 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG00_03",
-    "name": "Bambu PETG Basic @BBL N1 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
+    "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle",
     "inherits": "Bambu PETG Basic @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSG00_03",
+    "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
     ],
@@ -12,6 +12,6 @@
         "9"
     ],
     "compatible_printers": [
-        "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab A1 mini 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json
similarity index 70%
rename from resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.8 nozzle.json
rename to resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json
index d1145dc1b..e3d66863c 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL N1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG00_05",
-    "name": "Bambu PETG Basic @BBL N1 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
+    "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle",
     "inherits": "Bambu PETG Basic @BBL X1C 0.8 nozzle",
+    "from": "system",
+    "setting_id": "GFSG00_05",
+    "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
     ],
@@ -12,7 +12,7 @@
         "12"
     ],
     "compatible_printers": [
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json
index 2e0ad795e..f1e94f7f9 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG00_00",
     "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PETG Basic @base",
+    "from": "system",
+    "setting_id": "GFSG00_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json
index ec0647529..e12b65d70 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json	
@@ -1,19 +1,19 @@
 {
     "type": "filament",
-    "setting_id": "GFSG00_02",
     "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PETG Basic @base",
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
+    "from": "system",
+    "setting_id": "GFSG00_02",
+    "instantiation": "true",
     "fan_max_speed": [
         "60"
     ],
     "fan_min_speed": [
         "20"
     ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json
index 0c1b16bf9..c40928fb4 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG00_01",
     "name": "Bambu PETG Basic @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PETG Basic @base",
+    "from": "system",
+    "setting_id": "GFSG00_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "13"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json
index 4c0ccd83d..02ca4846f 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json	
@@ -1,18 +1,24 @@
 {
     "type": "filament",
-    "filament_id": "GFG00",
     "name": "Bambu PETG Basic @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pet",
-    "filament_flow_ratio": [
-        "0.95"
+    "from": "system",
+    "filament_id": "GFG00",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
     ],
-    "overhang_fan_speed": [
-        "90"
+    "cool_plate_temp_initial_layer": [
+        "0"
     ],
-    "overhang_fan_threshold": [
-        "10%"
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
     ],
     "fan_max_speed": [
         "40"
@@ -20,52 +26,46 @@
     "fan_min_speed": [
         "10"
     ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "fan_cooling_layer_time": [
-        "30"
-    ],
-    "cool_plate_temp": [
-        "0"
-    ],
-    "eng_plate_temp": [
-        "70"
-    ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "70"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
     "filament_cost": [
         "24.99"
     ],
     "filament_density": [
         "1.25"
     ],
-    "nozzle_temperature_range_low": [
-        "240"
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
     ],
     "nozzle_temperature_range_high": [
         "270"
     ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}"
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json
new file mode 100644
index 000000000..4545a6f2a
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle",
+    "inherits": "Bambu PETG-CF @BBL A1M",
+    "from": "system",
+    "setting_id": "GFSG50_04",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "9"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json
new file mode 100644
index 000000000..a630c42d3
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG-CF @BBL A1M",
+    "inherits": "Bambu PETG-CF @base",
+    "from": "system",
+    "setting_id": "GFSG50_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "9"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json
index 0680c6803..95c2cc329 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG50_02",
     "name": "Bambu PETG-CF @BBL X1C 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PETG-CF @base",
+    "from": "system",
+    "setting_id": "GFSG50_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "13"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json
index c4e20d66f..22c4caf10 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG50_01",
     "name": "Bambu PETG-CF @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PETG-CF @base",
+    "from": "system",
+    "setting_id": "GFSG50_01",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
@@ -13,4 +13,4 @@
         "Bambu Lab P1S 0.6 nozzle",
         "Bambu Lab P1S 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json
index f0627b0f0..5263e7005 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json	
@@ -1,80 +1,80 @@
 {
     "type": "filament",
-    "filament_id": "GFG50",
     "name": "Bambu PETG-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pet",
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
+    "from": "system",
+    "filament_id": "GFG50",
+    "instantiation": "false",
     "cool_plate_temp": [
         "0"
     ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
     "eng_plate_temp": [
         "70"
     ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
     "eng_plate_temp_initial_layer": [
         "70"
     ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "required_nozzle_HRC": [
-        "40"
-    ],
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "filament_cost": [
-        "34.99"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
     "fan_max_speed": [
         "30"
     ],
     "fan_min_speed": [
         "0"
     ],
+    "filament_cost": [
+        "34.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
     "filament_max_volumetric_speed": [
         "14"
     ],
+    "filament_type": [
+        "PETG-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
     "slow_down_layer_time": [
         "6"
     ],
+    "temperature_vitrification": [
+        "75"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}"
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json
new file mode 100644
index 000000000..6483f04f4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Aero @BBL A1M",
+    "inherits": "Bambu PLA Aero @base",
+    "from": "system",
+    "setting_id": "GFSA11_03",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json
index 3d27f686a..d61405181 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json	
@@ -1,10 +1,13 @@
 {
-    "name": "Bambu PLA Aero @BBL X1",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu PLA Aero @BBL X1",
     "inherits": "Bambu PLA Aero @base",
+    "from": "system",
     "setting_id": "GFSA11_00",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json
index 559801ab5..5e72c32a9 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json	
@@ -1,12 +1,15 @@
 {
-    "name": "Bambu PLA Aero @BBL X1C",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu PLA Aero @BBL X1C",
     "inherits": "Bambu PLA Aero @base",
+    "from": "system",
     "setting_id": "GFSA11_01",
+    "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
     "slow_down_layer_time": [
-        "4"
+        "8"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json
index b5787ea31..95b26c279 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
@@ -1,15 +1,12 @@
 {
     "type": "filament",
     "name": "Bambu PLA Aero @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
+    "from": "system",
     "filament_id": "GFA11",
-    "filament_type":[
-        "PLA-AERO"
-    ],
-    "filament_flow_ratio": [
-        "0.6"
+    "instantiation": "false",
+    "fan_min_speed": [
+        "30"
     ],
     "filament_cost": [
         "44.99"
@@ -17,16 +14,25 @@
     "filament_density": [
         "1.21"
     ],
+    "filament_flow_ratio": [
+        "0.6"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PLA-AERO"
+    ],
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
     "nozzle_temperature_range_high": [
         "260"
     ],
+    "nozzle_temperature_range_low": [
+        "210"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..c1a12b1c4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PLA Basic @base",
+    "from": "system",
+    "setting_id": "GFSA00_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json
new file mode 100644
index 000000000..85c54ef7d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Basic @BBL A1M",
+    "inherits": "Bambu PLA Basic @base",
+    "from": "system",
+    "setting_id": "GFSA00_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json
index 45684a3ff..6331956a4 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json	
@@ -1,13 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA04",
     "name": "Bambu PLA Basic @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Basic @base",
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
+    "from": "system",
+    "setting_id": "GFSA04",
+    "instantiation": "true",
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json
index b35a11bd9..7dbd89452 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA00_00",
     "name": "Bambu PLA Basic @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Basic @base",
+    "from": "system",
+    "setting_id": "GFSA00_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json
index aabdb191a..8cb3177c9 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json	
@@ -1,13 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA00_01",
     "name": "Bambu PLA Basic @BBL X1C 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Basic @base",
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
+    "from": "system",
+    "setting_id": "GFSA00_01",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json
index e83ef7154..9467927f2 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json	
@@ -1,13 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA00",
     "name": "Bambu PLA Basic @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Basic @base",
-    "filament_max_volumetric_speed": [
-        "21"
-    ],
+    "from": "system",
+    "setting_id": "GFSA00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json
index ded3eb4eb..72ad4f96a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json	
@@ -1,23 +1,27 @@
 {
     "type": "filament",
-    "filament_id": "GFA00",
     "name": "Bambu PLA Basic @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
+    "from": "system",
+    "filament_id": "GFA00",
+    "instantiation": "false",
     "filament_cost": [
         "24.99"
     ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
     "filament_density": [
         "1.26"
     ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "compatible_printers": [],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Impact @base.json b/resources/profiles/BBL/filament/Bambu PLA Impact @base.json
index cf7f860a5..7cdc6f3e4 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Impact @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Impact @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFA03",
     "name": "Bambu PLA Impact @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA03",
+    "instantiation": "false",
     "filament_vendor": [
         "Bambu Lab"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json
new file mode 100644
index 000000000..92dfae7b7
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Marble @BBL A1M",
+    "inherits": "Bambu PLA Marble @base",
+    "from": "system",
+    "setting_id": "GFSA07_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json
index 795f60b2a..20b0a0969 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA07_01",
     "name": "Bambu PLA Marble @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Marble @base",
+    "from": "system",
+    "setting_id": "GFSA07_01",
+    "instantiation": "true",
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json
index 4fe362318..d8e67b7b1 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA07_00",
     "name": "Bambu PLA Marble @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Marble @base",
+    "from": "system",
+    "setting_id": "GFSA07_00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json
index 47df38695..be77e7787 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json	
@@ -1,13 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFA07",
     "name": "Bambu PLA Marble @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
+    "from": "system",
+    "filament_id": "GFA07",
+    "instantiation": "false",
     "filament_cost": [
         "29.99"
     ],
@@ -17,7 +14,10 @@
     "filament_flow_ratio": [
         "0.98"
     ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..d637a5e27
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA01_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json
new file mode 100644
index 000000000..c08d84529
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Matte @BBL A1M",
+    "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA01_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json
index e180056e6..7721eacbc 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA05",
     "name": "Bambu PLA Matte @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA05",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "22"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json
index cd0ab9206..724412a73 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA01_00",
     "name": "Bambu PLA Matte @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA01_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json
index f3039c595..4764dde45 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA01_01",
     "name": "Bambu PLA Matte @BBL X1C 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA01_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "22"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json
index e4e70dd51..0351e674a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA01",
     "name": "Bambu PLA Matte @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "22"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json
index 16e468681..a9a337c6a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFA01",
     "name": "Bambu PLA Matte @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA01",
+    "instantiation": "false",
     "filament_vendor": [
         "Bambu Lab"
     ],
@@ -18,6 +18,6 @@
         "0.98"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..b486490b0
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "GFSA02_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json
new file mode 100644
index 000000000..9b58508d5
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Metal @BBL A1M",
+    "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "GFSA02_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json
index 389813b43..c481b66c0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA02_02",
     "name": "Bambu PLA Metal @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "GFSA02_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "21"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json
index c722caa9f..75ef9a15a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA02_01",
     "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "GFSA02_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json
index 145ba4e68..1739a9ebd 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA02",
     "name": "Bambu PLA Metal @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "GFSA02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "21"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json
index da916316e..77c81e4fb 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
@@ -1,23 +1,23 @@
 {
     "type": "filament",
-    "filament_id": "GFA02",
     "name": "Bambu PLA Metal @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
+    "from": "system",
+    "filament_id": "GFA02",
+    "instantiation": "false",
     "filament_cost": [
         "29.99"
     ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
     "filament_density": [
         "1.25"
     ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..19caa9c9e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSA05_04",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json
new file mode 100644
index 000000000..e85cca345
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Silk @BBL A1M",
+    "inherits": "Bambu PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSA05_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json
index 388cea461..0c0c43cb7 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA05_02",
     "name": "Bambu PLA Silk @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSA05_02",
+    "instantiation": "true",
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json
index a071d3a8b..2ce7e49f4 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA05_00",
     "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSA05_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json
index 9ee3c8a91..a4ecedcc8 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA05_01",
     "name": "Bambu PLA Silk @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSA05_01",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json
index a64a0c728..642f93961 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json	
@@ -1,29 +1,29 @@
 {
     "type": "filament",
-    "filament_id": "GFA05",
     "name": "Bambu PLA Silk @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
-    "filament_flow_ratio": [
-        "0.98"
+    "from": "system",
+    "filament_id": "GFA05",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
     ],
     "filament_density": [
         "1.32"
     ],
-    "filament_cost": [
-        "29.99"
+    "filament_flow_ratio": [
+        "0.98"
     ],
-    "nozzle_temperature_initial_layer": [
-        "230"
+    "filament_vendor": [
+        "Bambu Lab"
     ],
     "nozzle_temperature": [
         "230"
     ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json
new file mode 100644
index 000000000..d58554269
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Sparkle @BBL A1M",
+    "inherits": "Bambu PLA Sparkle @base",
+    "from": "system",
+    "setting_id": "GFSA08_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json
index 5a03b0bb6..7e9b618e3 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA08_01",
     "name": "Bambu PLA Sparkle @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Sparkle @base",
+    "from": "system",
+    "setting_id": "GFSA08_01",
+    "instantiation": "true",
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json
index b60657eab..7d18fcfe2 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA08_00",
     "name": "Bambu PLA Sparkle @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Sparkle @base",
+    "from": "system",
+    "setting_id": "GFSA08_00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json
index 15f3acc7f..cd4ee94fd 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json	
@@ -1,13 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFA08",
     "name": "Bambu PLA Sparkle @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
+    "from": "system",
+    "filament_id": "GFA08",
+    "instantiation": "false",
     "filament_cost": [
         "29.99"
     ],
@@ -17,7 +14,10 @@
     "filament_flow_ratio": [
         "0.98"
     ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..4f10cb0ed
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "GFSA09_04",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json
new file mode 100644
index 000000000..40b03fb52
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Tough @BBL A1M",
+    "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "GFSA09_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json
index 4ba18df63..afab239c4 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA09_01",
     "name": "Bambu PLA Tough @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "GFSA09_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "21"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json
index c1d88bc3d..85fdd4784 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA09_00",
     "name": "Bambu PLA Tough @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "GFSA09_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json
index b203df44e..78626f437 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA09_02",
     "name": "Bambu PLA Tough @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "GFSA09_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "21"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json
index 764386ed4..24168d6f1 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
@@ -1,23 +1,23 @@
 {
     "type": "filament",
-    "filament_id": "GFA09",
     "name": "Bambu PLA Tough @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
+    "from": "system",
+    "filament_id": "GFA09",
+    "instantiation": "false",
     "filament_cost": [
         "28.99"
     ],
-    "filament_flow_ratio": [
-        "0.98"
-    ],
     "filament_density": [
         "1.26"
     ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json
new file mode 100644
index 000000000..9e6df67b9
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle",
+    "inherits": "Bambu PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSA50_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json
new file mode 100644
index 000000000..8994c7d43
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA-CF @BBL A1M",
+    "inherits": "Bambu PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSA50_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json
index fc805fd43..e9017e351 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
@@ -1,17 +1,17 @@
 {
     "type": "filament",
-    "setting_id": "GFSA50_02",
     "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSA50_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "18"
     ],
-    "nozzle_temperature_initial_layer": [
+    "nozzle_temperature": [
         "230"
     ],
-    "nozzle_temperature": [
+    "nozzle_temperature_initial_layer": [
         "230"
     ],
     "compatible_printers": [
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json
index 0906ad366..f22fe330c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
@@ -1,17 +1,17 @@
 {
     "type": "filament",
-    "setting_id": "GFSA50_01",
     "name": "Bambu PLA-CF @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSA50_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "15"
     ],
-    "nozzle_temperature_initial_layer": [
+    "nozzle_temperature": [
         "230"
     ],
-    "nozzle_temperature": [
+    "nozzle_temperature_initial_layer": [
         "230"
     ],
     "compatible_printers": [
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json
index 763e2d070..3f356ae86 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json	
@@ -1,12 +1,12 @@
 {
     "type": "filament",
-    "filament_id": "GFA50",
     "name": "Bambu PLA-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
+    "from": "system",
+    "filament_id": "GFA50",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "0"
     ],
     "cool_plate_temp": [
         "45"
@@ -17,11 +17,23 @@
     "filament_cost": [
         "34.99"
     ],
+    "filament_density": [
+        "1.22"
+    ],
     "filament_flow_ratio": [
         "0.98"
     ],
-    "filament_density": [
-        "1.22"
+    "filament_type": [
+        "PLA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
+    "nozzle_temperature_range_low": [
+        "210"
     ],
     "required_nozzle_HRC": [
         "40"
@@ -29,19 +41,7 @@
     "slow_down_layer_time": [
         "8"
     ],
-    "nozzle_temperature_range_low": [
-        "210"
-    ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
-    "filament_type": [
-        "PLA-CF"
-    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json
index 802f2c9de..b4d2b754f 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS03_00",
     "name": "Bambu Support For PA/PET @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support For PA/PET @base",
+    "from": "system",
+    "setting_id": "GFSS03_00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json
index 1c41f14c7..7af6db4c1 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFS03",
     "name": "Bambu Support For PA/PET @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFS03",
+    "instantiation": "false",
     "required_nozzle_HRC": [
         "3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..f02e4de3c
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu Support For PLA @base",
+    "from": "system",
+    "setting_id": "GFSS02_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "0.5"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json
new file mode 100644
index 000000000..4a73ea4ac
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json	
@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Bambu Support For PLA @BBL A1M",
+    "inherits": "Bambu Support For PLA @base",
+    "from": "system",
+    "setting_id": "GFSS02_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json
index b42141a9f..b7a0f007a 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json	
@@ -1,17 +1,17 @@
 {
     "type": "filament",
-    "setting_id": "GFSS02_01",
     "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support For PLA @base",
+    "from": "system",
+    "setting_id": "GFSS02_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "0.5"
     ],
-    "nozzle_temperature_initial_layer": [
+    "nozzle_temperature": [
         "240"
     ],
-    "nozzle_temperature": [
+    "nozzle_temperature_initial_layer": [
         "240"
     ],
     "compatible_printers": [
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json
index f110bf613..52fa72bd5 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS02_02",
     "name": "Bambu Support For PLA @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support For PLA @base",
+    "from": "system",
+    "setting_id": "GFSS02_02",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json
index e014c0013..75179145e 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
@@ -1,19 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFS02",
     "name": "Bambu Support For PLA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
-    "filament_density": [
-        "1.30"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
+    "from": "system",
+    "filament_id": "GFS02",
+    "instantiation": "false",
     "cool_plate_temp": [
         "40"
     ],
@@ -23,10 +14,19 @@
     "filament_cost": [
         "69.98"
     ],
+    "filament_density": [
+        "1.30"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json
index 4d194ca02..b0847af24 100644
--- a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS01",
     "name": "Bambu Support G @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support G @base",
+    "from": "system",
+    "setting_id": "GFSS01",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json
index bbc35bf60..1d72fe958 100644
--- a/resources/profiles/BBL/filament/Bambu Support G @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support G @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFS01",
     "name": "Bambu Support G @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFS01",
+    "instantiation": "false",
     "required_nozzle_HRC": [
         "3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..96c226d8e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Bambu Support W @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "GFSS00_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "0.5"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json
new file mode 100644
index 000000000..51efafdcc
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json	
@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Bambu Support W @BBL A1M",
+    "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "GFSS00_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json
index b631fe80c..3d00718f7 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json	
@@ -1,13 +1,13 @@
 {
     "type": "filament",
-    "setting_id": "GFSS02",
     "name": "Bambu Support W @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "GFSS02",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json
index c300fa810..b7ecb14a8 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json	
@@ -1,17 +1,17 @@
 {
     "type": "filament",
-    "setting_id": "GFSS00_00",
     "name": "Bambu Support W @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "GFSS00_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "0.5"
     ],
-    "nozzle_temperature_initial_layer": [
+    "nozzle_temperature": [
         "240"
     ],
-    "nozzle_temperature": [
+    "nozzle_temperature_initial_layer": [
         "240"
     ],
     "compatible_printers": [
diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json
index eb93ea64c..ebd8d0013 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS00",
     "name": "Bambu Support W @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "GFSS00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json
index e6efbd3c4..63f7acebc 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @base.json	
@@ -1,19 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFS00",
     "name": "Bambu Support W @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
-    "filament_density": [
-        "1.30"
-    ],
-    "filament_is_support": [
-        "1"
-    ],
+    "from": "system",
+    "filament_id": "GFS00",
+    "instantiation": "false",
     "cool_plate_temp": [
         "40"
     ],
@@ -23,10 +14,19 @@
     "filament_cost": [
         "69.98"
     ],
+    "filament_density": [
+        "1.30"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json
new file mode 100644
index 000000000..eefb04f27
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU 95A @BBL A1M",
+    "inherits": "Bambu TPU 95A @base",
+    "from": "system",
+    "setting_id": "GFSU01_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "3.6"
+    ],
+    "hot_plate_temp": [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "30"
+    ],
+    "textured_plate_temp": [
+        "30"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "30"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json
index 709e94f9b..262594652 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSU01",
     "name": "Bambu TPU 95A @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu TPU 95A @base",
+    "from": "system",
+    "setting_id": "GFSU01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "3.6"
     ],
@@ -13,4 +13,4 @@
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json
index 5aff786ba..838fc4eb2 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSU00",
     "name": "Bambu TPU 95A @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu TPU 95A @base",
+    "from": "system",
+    "setting_id": "GFSU00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "3.6"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json
index 507386fb5..bc1e83934 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFU01",
     "name": "Bambu TPU 95A @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "GFU01",
+    "instantiation": "false",
     "filament_vendor": [
         "Bambu Lab"
     ],
diff --git a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json
index f63befa67..ea692b184 100644
--- a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB99_00",
     "name": "Generic ABS @0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ABS @base",
+    "from": "system",
+    "setting_id": "GFSB99_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Generic ABS @base.json b/resources/profiles/BBL/filament/Generic ABS @base.json
index 044703f6a..e41b289fb 100644
--- a/resources/profiles/BBL/filament/Generic ABS @base.json	
+++ b/resources/profiles/BBL/filament/Generic ABS @base.json	
@@ -1,14 +1,14 @@
 {
     "type": "filament",
-    "filament_id": "GFB99",
     "name": "Generic ABS @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "GFB99",
+    "instantiation": "false",
     "filament_flow_ratio": [
         "0.95"
     ],
     "filament_max_volumetric_speed": [
         "16"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic ABS.json b/resources/profiles/BBL/filament/Generic ABS.json
index b21d0a3f6..bd7c0959c 100644
--- a/resources/profiles/BBL/filament/Generic ABS.json	
+++ b/resources/profiles/BBL/filament/Generic ABS.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB99",
     "name": "Generic ABS",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ABS @base",
+    "from": "system",
+    "setting_id": "GFSB99",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json
index 0f614f488..7e26d7bb6 100644
--- a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB98_00",
     "name": "Generic ASA @0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ASA @base",
+    "from": "system",
+    "setting_id": "GFSB98_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json
index 10ed89183..9f80b36f1 100644
--- a/resources/profiles/BBL/filament/Generic ASA @base.json	
+++ b/resources/profiles/BBL/filament/Generic ASA @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFB98",
     "name": "Generic ASA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB98",
+    "instantiation": "false",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic ASA.json b/resources/profiles/BBL/filament/Generic ASA.json
index e2e68058f..7e56eb37a 100644
--- a/resources/profiles/BBL/filament/Generic ASA.json	
+++ b/resources/profiles/BBL/filament/Generic ASA.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB98",
     "name": "Generic ASA",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ASA @base",
+    "from": "system",
+    "setting_id": "GFSB98",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..a2200be03
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "name": "Generic HIPS @BBL A1M 0.2 nozzle",
+    "inherits": "Generic HIPS @base",
+    "from": "system",
+    "setting_id": "GFSS98_03",
+    "instantiation": "true",
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_max_volumetric_speed": [
+        "0.5"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json
new file mode 100644
index 000000000..11c1000c2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json	
@@ -0,0 +1,31 @@
+{
+    "type": "filament",
+    "name": "Generic HIPS @BBL A1M",
+    "inherits": "Generic HIPS @base",
+    "from": "system",
+    "setting_id": "GFSS98_02",
+    "instantiation": "true",
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json
index 7a2636be4..ea504f770 100644
--- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json	
@@ -1,17 +1,17 @@
 {
-  "type": "filament",
-  "setting_id": "GFSS98_01",
-  "name": "Generic HIPS @BBL X1C 0.2 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "Generic HIPS @base",
-  "filament_max_volumetric_speed": [
-      "0.5"
-  ],
-  "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.2 nozzle",
-      "Bambu Lab X1 0.2 nozzle",
-      "Bambu Lab P1P 0.2 nozzle",
-      "Bambu Lab P1S 0.2 nozzle"
-  ]
+    "type": "filament",
+    "name": "Generic HIPS @BBL X1C 0.2 nozzle",
+    "inherits": "Generic HIPS @base",
+    "from": "system",
+    "setting_id": "GFSS98_01",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "0.5"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1P 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json
index c760b2f18..cf3280305 100644
--- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS98_00",
     "name": "Generic HIPS @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic HIPS @base",
+    "from": "system",
+    "setting_id": "GFSS98_00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
@@ -17,9 +17,6 @@
         "Bambu Lab P1P 0.8 nozzle",
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
-        "Bambu Lab P1S 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic HIPS @base.json b/resources/profiles/BBL/filament/Generic HIPS @base.json
index 030daa118..9ffe6a859 100644
--- a/resources/profiles/BBL/filament/Generic HIPS @base.json	
+++ b/resources/profiles/BBL/filament/Generic HIPS @base.json	
@@ -1,14 +1,11 @@
 {
-  "type": "filament",
-  "filament_id": "GFS98",
-  "name": "Generic HIPS @base",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_filament_hips",
-  "filament_vendor": [
-      "Generic"
-  ],
-  "filament_is_support": [
-      "1"
-  ]
+    "type": "filament",
+    "name": "Generic HIPS @base",
+    "inherits": "fdm_filament_hips",
+    "from": "system",
+    "filament_id": "GFS98",
+    "instantiation": "false",
+    "filament_is_support": [
+        "1"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json
index 760586544..5ce9881f8 100644
--- a/resources/profiles/BBL/filament/Generic PA-CF.json	
+++ b/resources/profiles/BBL/filament/Generic PA-CF.json	
@@ -1,11 +1,11 @@
 {
     "type": "filament",
+    "name": "Generic PA-CF",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
     "filament_id": "GFN98",
     "setting_id": "GFSN99",
-    "name": "Generic PA-CF",
-    "from": "system",
     "instantiation": "true",
-    "inherits": "fdm_filament_pa",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json
index cfa367517..d7439252d 100644
--- a/resources/profiles/BBL/filament/Generic PA.json	
+++ b/resources/profiles/BBL/filament/Generic PA.json	
@@ -1,22 +1,22 @@
 {
     "type": "filament",
+    "name": "Generic PA",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
     "filament_id": "GFN99",
     "setting_id": "GFSN98",
-    "name": "Generic PA",
-    "from": "system",
     "instantiation": "true",
-    "inherits": "fdm_filament_pa",
-    "required_nozzle_HRC": [
-        "3"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "280"
+    "filament_max_volumetric_speed": [
+        "16"
     ],
     "nozzle_temperature": [
         "280"
     ],
-    "filament_max_volumetric_speed": [
-        "16"
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "required_nozzle_HRC": [
+        "3"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json
index 1563dd5c8..2aaddc1d9 100644
--- a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC99_00",
     "name": "Generic PC @0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PC @base",
+    "from": "system",
+    "setting_id": "GFSC99_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json
index e4abf728d..43ba9a9c6 100644
--- a/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC99_03",
     "name": "Generic PC @BBL P1S 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PC @0.2 nozzle",
+    "from": "system",
+    "setting_id": "GFSC99_03",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P1S.json b/resources/profiles/BBL/filament/Generic PC @BBL P1S.json
index b50a8a32a..a384d080e 100644
--- a/resources/profiles/BBL/filament/Generic PC @BBL P1S.json	
+++ b/resources/profiles/BBL/filament/Generic PC @BBL P1S.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC99_04",
     "name": "Generic PC @BBL P1S",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PC",
+    "from": "system",
+    "setting_id": "GFSC99_04",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json
index b51b60889..6c56650ba 100644
--- a/resources/profiles/BBL/filament/Generic PC @base.json	
+++ b/resources/profiles/BBL/filament/Generic PC @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFC99",
     "name": "Generic PC @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pc",
+    "from": "system",
+    "filament_id": "GFC99",
+    "instantiation": "false",
     "filament_max_volumetric_speed": [
         "16"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PC.json b/resources/profiles/BBL/filament/Generic PC.json
index 156ee2098..6e8cbc2c6 100644
--- a/resources/profiles/BBL/filament/Generic PC.json	
+++ b/resources/profiles/BBL/filament/Generic PC.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC99",
     "name": "Generic PC",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PC @base",
+    "from": "system",
+    "setting_id": "GFSC99",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
@@ -13,4 +13,4 @@
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json
index 124f0a32f..ce6645dbf 100644
--- a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG99_01",
     "name": "Generic PETG @0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PETG @base",
+    "from": "system",
+    "setting_id": "GFSG99_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..7abc1a065
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Generic PETG @BBL A1M 0.2 nozzle",
+    "inherits": "Generic PETG @base",
+    "from": "system",
+    "setting_id": "GFSG99_02",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json
new file mode 100644
index 000000000..83ce33ee7
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Generic PETG @BBL A1M",
+    "inherits": "Generic PETG @base",
+    "from": "system",
+    "setting_id": "GFSG99_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG @base.json b/resources/profiles/BBL/filament/Generic PETG @base.json
index 2308488ea..6e25c129f 100644
--- a/resources/profiles/BBL/filament/Generic PETG @base.json	
+++ b/resources/profiles/BBL/filament/Generic PETG @base.json	
@@ -1,51 +1,54 @@
 {
     "type": "filament",
-    "filament_id": "GFG99",
     "name": "Generic PETG @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG99",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
     "fan_cooling_layer_time": [
         "30"
     ],
-    "overhang_fan_speed": [
-        "90"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
     "fan_max_speed": [
         "90"
     ],
     "fan_min_speed": [
         "40"
     ],
-    "slow_down_min_speed": [
-        "20"
-    ],
     "filament_flow_ratio": [
         "0.95"
     ],
     "filament_max_volumetric_speed": [
         "12"
     ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
     "nozzle_temperature_range_high": [
         "270"
     ],
-    "cool_plate_temp": [
-        "0"
+    "overhang_fan_speed": [
+        "90"
     ],
-    "eng_plate_temp": [
-        "70"
+    "overhang_fan_threshold": [
+        "10%"
     ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "70"
-    ],
-    "hot_plate_temp": [
-        "70"
+    "slow_down_min_speed": [
+        "20"
     ],
     "textured_plate_temp": [
         "70"
@@ -53,10 +56,7 @@
     "textured_plate_temp_initial_layer": [
         "70"
     ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}"
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json
index 85cc9c8b2..cd1ddd978 100644
--- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG50",
     "name": "Generic PETG-CF @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PETG-CF @base",
+    "from": "system",
+    "setting_id": "GFSG50",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
@@ -16,4 +16,4 @@
         "Bambu Lab P1S 0.6 nozzle",
         "Bambu Lab P1S 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json
index c4c96b813..c794c3566 100644
--- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json	
@@ -1,80 +1,80 @@
 {
     "type": "filament",
-    "filament_id": "GFG98",
     "name": "Generic PETG-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pet",
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "temperature_vitrification": [
-        "75"
-    ],
-    "overhang_fan_threshold": [
-        "10%"
-    ],
-    "overhang_fan_speed": [
-        "90"
-    ],
+    "from": "system",
+    "filament_id": "GFG98",
+    "instantiation": "false",
     "cool_plate_temp": [
         "0"
     ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
     "eng_plate_temp": [
         "70"
     ],
-    "hot_plate_temp": [
-        "70"
-    ],
-    "textured_plate_temp": [
-        "70"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
     "eng_plate_temp_initial_layer": [
         "70"
     ],
-    "hot_plate_temp_initial_layer": [
-        "70"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "70"
-    ],
-    "required_nozzle_HRC": [
-        "40"
-    ],
-    "filament_vendor": [
-        "Bambu Lab"
-    ],
-    "filament_type": [
-        "PETG-CF"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
-    ],
-    "nozzle_temperature_range_high": [
-        "270"
-    ],
-    "filament_cost": [
-        "34.99"
-    ],
-    "filament_density": [
-        "1.25"
-    ],
     "fan_max_speed": [
         "30"
     ],
     "fan_min_speed": [
         "0"
     ],
+    "filament_cost": [
+        "34.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
     "filament_max_volumetric_speed": [
         "12"
     ],
+    "filament_type": [
+        "PETG-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
     "slow_down_layer_time": [
         "6"
     ],
-    "filament_start_gcode":[
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}"
+    "temperature_vitrification": [
+        "75"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG.json b/resources/profiles/BBL/filament/Generic PETG.json
index ca84198d6..50827d352 100644
--- a/resources/profiles/BBL/filament/Generic PETG.json	
+++ b/resources/profiles/BBL/filament/Generic PETG.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG99",
     "name": "Generic PETG",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PETG @base",
+    "from": "system",
+    "setting_id": "GFSG99",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json
index 8c37572bc..734c0d5fa 100644
--- a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json	
@@ -1,19 +1,19 @@
 {
     "type": "filament",
-    "setting_id": "GFSL99_00",
     "name": "Generic PLA @0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA @base",
+    "from": "system",
+    "setting_id": "GFSL99_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
-    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
         "Bambu Lab P1S 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..79d1f2150
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Generic PLA @BBL A1M 0.2 nozzle",
+    "inherits": "Generic PLA @base",
+    "from": "system",
+    "setting_id": "GFSL99_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json
new file mode 100644
index 000000000..84bbaa9e1
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json	
@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Generic PLA @BBL A1M",
+    "inherits": "Generic PLA @base",
+    "from": "system",
+    "setting_id": "GFSL99_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json
index 43e3ff2f6..904cef4da 100644
--- a/resources/profiles/BBL/filament/Generic PLA @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFL99",
     "name": "Generic PLA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL99",
+    "instantiation": "false",
     "filament_flow_ratio": [
         "0.98"
     ],
@@ -12,6 +12,6 @@
         "8"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..b043e5265
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle",
+    "inherits": "Generic PLA High Speed @BBL A1M",
+    "from": "system",
+    "setting_id": "GFSL95_07",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json
new file mode 100644
index 000000000..069747358
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Generic PLA High Speed @BBL A1M",
+    "inherits": "Generic PLA High Speed @base",
+    "from": "system",
+    "setting_id": "GFSL95_06",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle",
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json
new file mode 100644
index 000000000..ba7582a9e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "name": "Generic PLA Silk @BBL A1M",
+    "inherits": "Generic PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSL96_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "7.5"
+    ],
+    "filament_retraction_length": [
+        "0.5"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json
index 456b9a6fa..60ac1d46f 100644
--- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFL96",
     "name": "Generic PLA Silk @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL96",
+    "instantiation": "false",
     "filament_flow_ratio": [
         "0.98"
     ],
@@ -12,6 +12,6 @@
         "8"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA Silk.json b/resources/profiles/BBL/filament/Generic PLA Silk.json
index ce9698f67..183cea5d6 100644
--- a/resources/profiles/BBL/filament/Generic PLA Silk.json	
+++ b/resources/profiles/BBL/filament/Generic PLA Silk.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL99_01",
     "name": "Generic PLA Silk",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSL99_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "7.5"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json
new file mode 100644
index 000000000..b8438ffee
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Generic PLA-CF @BBL A1M",
+    "inherits": "Generic PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSL98_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json
index 1055ec990..597bdd6e2 100644
--- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json	
@@ -1,12 +1,12 @@
 {
     "type": "filament",
-    "filament_id": "GFL98",
     "name": "Generic PLA-CF @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "required_nozzle_HRC": [
-        "40"
+    "from": "system",
+    "filament_id": "GFL98",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "0"
     ],
     "cool_plate_temp": [
         "45"
@@ -20,13 +20,13 @@
     "filament_type": [
         "PLA-CF"
     ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
     "slow_down_layer_time": [
         "7"
     ],
-    "additional_cooling_fan_speed": [
-        "0"
-    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA-CF.json b/resources/profiles/BBL/filament/Generic PLA-CF.json
index 39f5a6a48..d1c4a8e9b 100644
--- a/resources/profiles/BBL/filament/Generic PLA-CF.json	
+++ b/resources/profiles/BBL/filament/Generic PLA-CF.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL98",
     "name": "Generic PLA-CF",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSL98",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
@@ -16,4 +16,4 @@
         "Bambu Lab P1S 0.6 nozzle",
         "Bambu Lab P1S 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA.json b/resources/profiles/BBL/filament/Generic PLA.json
index e4579f39c..800947d83 100644
--- a/resources/profiles/BBL/filament/Generic PLA.json	
+++ b/resources/profiles/BBL/filament/Generic PLA.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL99",
     "name": "Generic PLA",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA @base",
+    "from": "system",
+    "setting_id": "GFSL99",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
@@ -17,6 +17,6 @@
         "Bambu Lab P1S 0.8 nozzle"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json
index 596ddaf91..63afb9af1 100644
--- a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS99_00",
     "name": "Generic PVA @0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PVA @base",
+    "from": "system",
+    "setting_id": "GFSS99_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "0.5"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..d57e6fd72
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Generic PVA @BBL A1M 0.2 nozzle",
+    "inherits": "Generic PVA @base",
+    "from": "system",
+    "setting_id": "GFSS99_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "0.5"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json
new file mode 100644
index 000000000..fa3e91526
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Generic PVA @BBL A1M",
+    "inherits": "Generic PVA @base",
+    "from": "system",
+    "setting_id": "GFSS99_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle",
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json
index e472d0284..c29671ea3 100644
--- a/resources/profiles/BBL/filament/Generic PVA @base.json	
+++ b/resources/profiles/BBL/filament/Generic PVA @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFS99",
     "name": "Generic PVA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pva",
+    "from": "system",
+    "filament_id": "GFS99",
+    "instantiation": "false",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PVA.json b/resources/profiles/BBL/filament/Generic PVA.json
index 4bd23ee2b..fe621b3df 100644
--- a/resources/profiles/BBL/filament/Generic PVA.json	
+++ b/resources/profiles/BBL/filament/Generic PVA.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS99",
     "name": "Generic PVA",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PVA @base",
+    "from": "system",
+    "setting_id": "GFSS99",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json b/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json
new file mode 100644
index 000000000..d5caa5640
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Generic TPU @BBL A1M",
+    "inherits": "Generic TPU",
+    "from": "system",
+    "setting_id": "GFSU99_00",
+    "instantiation": "true",
+    "hot_plate_temp": [
+        "30"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "30"
+    ],
+    "textured_plate_temp": [
+        "30"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "30"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json
index f956343ae..b8b689644 100644
--- a/resources/profiles/BBL/filament/Generic TPU.json	
+++ b/resources/profiles/BBL/filament/Generic TPU.json	
@@ -1,17 +1,14 @@
 {
     "type": "filament",
+    "name": "Generic TPU",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
     "filament_id": "GFU99",
     "setting_id": "GFSR99",
-    "name": "Generic TPU",
-    "from": "system",
     "instantiation": "true",
-    "inherits": "fdm_filament_tpu",
     "filament_max_volumetric_speed": [
         "3.2"
     ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}"
-    ],
     "compatible_printers": [
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
@@ -22,5 +19,8 @@
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
         "Bambu Lab P1S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..dd372d83b
--- /dev/null
+++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Overture Matte PLA @BBL A1M 0.2 nozzle",
+    "inherits": "Overture Matte PLA @BBL A1M",
+    "from": "system",
+    "setting_id": "GFSL05_06",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json
new file mode 100644
index 000000000..0e6e727a3
--- /dev/null
+++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Overture Matte PLA @BBL A1M",
+    "inherits": "Overture Matte PLA @base",
+    "from": "system",
+    "setting_id": "GFSL05_05",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json
index 4c1705b85..cedb6ba84 100644
--- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL05_02",
     "name": "Overture Matte PLA @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Overture Matte PLA @base",
+    "from": "system",
+    "setting_id": "GFSL05_02",
+    "instantiation": "true",
     "slow_down_layer_time": [
         "10"
     ],
diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json
index b0691683c..75e17fe8c 100644
--- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL05_01",
     "name": "Overture Matte PLA @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Overture Matte PLA @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSL05_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json
index 6b6c5386c..421c52ff8 100644
--- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL05_00",
     "name": "Overture Matte PLA @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Overture Matte PLA @base",
+    "from": "system",
+    "setting_id": "GFSL05_00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @base.json b/resources/profiles/BBL/filament/Overture Matte PLA @base.json
index e833c9ae3..b4e2e3748 100644
--- a/resources/profiles/BBL/filament/Overture Matte PLA @base.json	
+++ b/resources/profiles/BBL/filament/Overture Matte PLA @base.json	
@@ -1,16 +1,19 @@
 {
     "type": "filament",
-    "filament_id": "GFL05",
     "name": "Overture Matte PLA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL05",
+    "instantiation": "false",
     "filament_cost": [
         "24.52"
     ],
     "filament_density": [
         "1.22"
     ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..5a705c4a0
--- /dev/null
+++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Overture PLA @BBL A1M 0.2 nozzle",
+    "inherits": "Overture PLA @BBL A1M",
+    "from": "system",
+    "setting_id": "GFSL04_06",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json
new file mode 100644
index 000000000..851864ce0
--- /dev/null
+++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Overture PLA @BBL A1M",
+    "inherits": "Overture PLA @base",
+    "from": "system",
+    "setting_id": "GFSL04_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1.json
index 5a786de0e..c36384a9e 100644
--- a/resources/profiles/BBL/filament/Overture PLA @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL04_01",
     "name": "Overture PLA @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Overture PLA @base",
+    "from": "system",
+    "setting_id": "GFSL04_01",
+    "instantiation": "true",
     "slow_down_layer_time": [
         "10"
     ],
diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json
index 6068532d7..d8e4eb511 100644
--- a/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL04_02",
     "name": "Overture PLA @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Overture PLA @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSL04_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json
index 8ae45da9d..28e21b831 100644
--- a/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL04_05",
     "name": "Overture PLA @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Overture PLA @base",
+    "from": "system",
+    "setting_id": "GFSL04_05",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Overture PLA @base.json b/resources/profiles/BBL/filament/Overture PLA @base.json
index cf33af039..7a4ce113b 100644
--- a/resources/profiles/BBL/filament/Overture PLA @base.json	
+++ b/resources/profiles/BBL/filament/Overture PLA @base.json	
@@ -1,16 +1,19 @@
 {
     "type": "filament",
-    "filament_id": "GFL04",
     "name": "Overture PLA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL04",
+    "instantiation": "false",
     "filament_cost": [
         "24.15"
     ],
     "filament_density": [
         "1.2"
     ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json
index 70b31558e..e703e3d6a 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB00_02",
     "name": "Bambu ABS @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_02",
+    "instantiation": "true",
     "fan_max_speed": [
         "20"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json
index 6a8a9771d..40a0a0a26 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB00_03",
     "name": "Bambu ABS @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_03",
+    "instantiation": "true",
     "fan_max_speed": [
         "20"
     ],
@@ -29,9 +29,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json
index e90046da8..8a29f7a0d 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSN00_10",
     "name": "Bambu PA-CF @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PA-CF @base",
+    "from": "system",
+    "setting_id": "GFSN00_10",
+    "instantiation": "true",
     "fan_cooling_layer_time": [
         "5"
     ],
@@ -26,9 +26,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json
index d3eebf8e5..705d14327 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json	
@@ -1,16 +1,13 @@
 {
     "type": "filament",
-    "setting_id": "GFSN04_10",
     "name": "Bambu PAHT-CF @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PAHT-CF @base",
+    "from": "system",
+    "setting_id": "GFSN04_10",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json
index 39d467425..b4bcf7550 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_03",
     "name": "Bambu PC @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @base",
+    "from": "system",
+    "setting_id": "GFSC00_03",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json
index c85bb787e..a34eef36a 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC00_04",
     "name": "Bambu PC @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PC @base",
+    "from": "system",
+    "setting_id": "GFSC00_04",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
@@ -32,9 +32,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json
index 19f2769b4..9edc5c084 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFST01_10",
     "name": "Bambu PET-CF @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PET-CF @base",
+    "from": "system",
+    "setting_id": "GFST01_10",
+    "instantiation": "true",
     "reduce_fan_stop_start_freq": [
         "0"
     ],
@@ -14,9 +14,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json
index b11c43782..4904cf0b1 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json	
@@ -1,15 +1,14 @@
 {
     "type": "filament",
-    "setting_id": "GFSG50_03",
     "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PETG-CF @base",
+    "from": "system",
+    "setting_id": "GFSG50_03",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "13"
     ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.4 nozzle",
-        "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json
index 6a9d38fa1..fe4edb3f3 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json	
@@ -1,14 +1,12 @@
 {
     "type": "filament",
-    "setting_id": "GFSG50_11",
     "name": "Bambu PETG-CF @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PETG-CF @base",
+    "from": "system",
+    "setting_id": "GFSG50_11",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json
index cd2695fd4..12b0b187c 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json	
@@ -1,41 +1,34 @@
 {
-    "name": "Bambu PLA Aero @BBL P1P",
     "type": "filament",
-    "instantiation": "true",
-    "from": "system",
+    "name": "Bambu PLA Aero @BBL P1P",
     "inherits": "Bambu PLA Aero @base",
+    "from": "system",
     "setting_id": "GFSA11_02",
-    "hot_plate_temp_initial_layer": [
-        "65"
-    ],
+    "instantiation": "true",
     "additional_cooling_fan_speed": [
         "0"
     ],
     "fan_cooling_layer_time": [
         "80"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
     "hot_plate_temp": [
         "65"
     ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "textured_plate_temp": [
-        "65"
-    ],
-   
-    "slow_down_layer_time": [
-        "8"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json
index 8a97f69e8..815cca583 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSA00_10",
     "name": "Bambu PLA Basic @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Basic @base",
+    "from": "system",
+    "setting_id": "GFSA00_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
@@ -20,14 +26,7 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json
index 510a7c508..da0b3266a 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json	
@@ -1,15 +1,15 @@
 {
     "type": "filament",
-    "setting_id": "GFSA04_10",
     "name": "Bambu PLA Basic @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Basic @base",
-    "filament_max_volumetric_speed": [
-        "21"
+    "from": "system",
+    "setting_id": "GFSA04_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
     ],
-    "slow_down_layer_time": [
-        "8"
+    "fan_min_speed": [
+        "50"
     ],
     "hot_plate_temp": [
         "65"
@@ -17,24 +17,18 @@
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json
index 3701651c8..01a5fab4a 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json	
@@ -1,37 +1,34 @@
 {
     "type": "filament",
-    "setting_id": "GFSA07_10",
     "name": "Bambu PLA Marble @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Marble @base",
+    "from": "system",
+    "setting_id": "GFSA07_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json
index 3556ff2c2..469caee5c 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSA01_10",
     "name": "Bambu PLA Matte @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA01_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
@@ -20,14 +26,7 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json
index dc7e6b6d4..fcfc07fd1 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json	
@@ -1,40 +1,37 @@
 {
     "type": "filament",
-    "setting_id": "GFSA05_10",
     "name": "Bambu PLA Matte @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Matte @base",
+    "from": "system",
+    "setting_id": "GFSA05_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
-    "slow_down_layer_time": [
-        "8"
-    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json
index 8022126bc..e15633097 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSA02_11",
     "name": "Bambu PLA Metal @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "GFSA02_11",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
@@ -20,14 +26,7 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json
index 00eac7cde..a0dca2a89 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json	
@@ -1,40 +1,37 @@
 {
     "type": "filament",
-    "setting_id": "GFSA02_10",
     "name": "Bambu PLA Metal @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Metal @base",
+    "from": "system",
+    "setting_id": "GFSA02_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "21"
     ],
-    "slow_down_layer_time": [
-        "8"
-    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json
index d725892bf..09a0b7a53 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSA05_11",
     "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSA05_11",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
@@ -21,7 +21,6 @@
         "65"
     ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json
index 0367a81f9..81eed74e3 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json	
@@ -1,19 +1,19 @@
 {
     "type": "filament",
-    "setting_id": "GFSA05_12",
     "name": "Bambu PLA Silk @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Silk @base",
-    "slow_down_layer_time": [
-        "8"
-    ],
+    "from": "system",
+    "setting_id": "GFSA05_12",
+    "instantiation": "true",
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
@@ -23,9 +23,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json
index 2f33d7ada..437b010e7 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json	
@@ -1,37 +1,34 @@
 {
     "type": "filament",
-    "setting_id": "GFSA08_10",
     "name": "Bambu PLA Sparkle @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Sparkle @base",
+    "from": "system",
+    "setting_id": "GFSA08_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json
index a49e6800d..b1d1351f6 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSA09_10",
     "name": "Bambu PLA Tough @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "GFSA09_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
@@ -20,14 +26,7 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json
index 5c856807a..f756aef51 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json	
@@ -1,40 +1,37 @@
 {
     "type": "filament",
-    "setting_id": "GFSA09_11",
     "name": "Bambu PLA Tough @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA Tough @base",
+    "from": "system",
+    "setting_id": "GFSA09_11",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "21"
     ],
-    "slow_down_layer_time": [
-        "8"
-    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json
index bd608e2ea..500dacbbf 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSA50_11",
     "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSA50_11",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
@@ -14,28 +20,20 @@
     "hot_plate_temp_initial_layer": [
         "65"
     ],
-    "textured_plate_temp": [
-        "65"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "65"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "nozzle_temperature": [
         "230"
     ],
     "nozzle_temperature_initial_layer": [
         "230"
     ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json
index 7255e14ef..640bb4af9 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSA50_10",
     "name": "Bambu PLA-CF @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSA50_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
@@ -14,26 +20,19 @@
     "hot_plate_temp_initial_layer": [
         "65"
     ],
-    "textured_plate_temp": [
-        "65"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "65"
-    ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "nozzle_temperature": [
         "230"
     ],
     "nozzle_temperature_initial_layer": [
         "230"
     ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.4 nozzle",
-        "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json
index 33c1cfc85..394b924a0 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json	
@@ -1,16 +1,13 @@
 {
     "type": "filament",
-    "setting_id": "GFSS03_01",
     "name": "Bambu Support For PA/PET @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support For PA/PET @base",
+    "from": "system",
+    "setting_id": "GFSS03_01",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json
index d077a2af7..c8eacd22f 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json	
@@ -1,39 +1,38 @@
 {
     "type": "filament",
-    "setting_id": "GFSS02_11",
     "name": "Bambu Support For PLA @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support For PLA @base",
+    "from": "system",
+    "setting_id": "GFSS02_11",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json
index 2bb81bcd9..cbe201a3a 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSS02_12",
     "name": "Bambu Support For PLA @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support For PLA @base",
+    "from": "system",
+    "setting_id": "GFSS02_12",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "hot_plate_temp": [
         "65"
     ],
@@ -17,18 +23,9 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json
index 28daa264e..318bcd86d 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json	
@@ -1,16 +1,13 @@
 {
     "type": "filament",
-    "setting_id": "GFSS01_10",
     "name": "Bambu Support G @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support G @base",
+    "from": "system",
+    "setting_id": "GFSS01_10",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json
index 8ea5f80cb..0b1994f67 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json	
@@ -1,39 +1,38 @@
 {
     "type": "filament",
-    "setting_id": "GFSS00_10",
     "name": "Bambu Support W @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "GFSS00_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "nozzle_temperature": [
-        "240"
-    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json
index 06518344b..4463bcd32 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSS02_10",
     "name": "Bambu Support W @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Support W @base",
+    "from": "system",
+    "setting_id": "GFSS02_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "hot_plate_temp": [
         "65"
     ],
@@ -17,18 +23,9 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json
index 7ae5de4fe..5c980a1e6 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSU01_10",
     "name": "Bambu TPU 95A @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu TPU 95A @base",
+    "from": "system",
+    "setting_id": "GFSU01_10",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "3.6"
     ],
@@ -24,8 +24,8 @@
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json
index fc8328fbf..2315e5da8 100644
--- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB99_02",
     "name": "Generic ABS @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ABS @base",
+    "from": "system",
+    "setting_id": "GFSB99_02",
+    "instantiation": "true",
     "fan_max_speed": [
         "20"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json
index 649f63b24..3b46c650d 100644
--- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB99_01",
     "name": "Generic ABS @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ABS @base",
+    "from": "system",
+    "setting_id": "GFSB99_01",
+    "instantiation": "true",
     "fan_max_speed": [
         "20"
     ],
@@ -26,9 +26,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json
index 2226507ca..50bf7bebb 100644
--- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB98_11",
     "name": "Generic ASA @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ASA @base",
+    "from": "system",
+    "setting_id": "GFSB98_11",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json
index cde30cc60..000cddfd3 100644
--- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB98_10",
     "name": "Generic ASA @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic ASA @base",
+    "from": "system",
+    "setting_id": "GFSB98_10",
+    "instantiation": "true",
     "hot_plate_temp": [
         "100"
     ],
@@ -20,9 +20,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json
index de9da92c1..696ea395e 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json	
@@ -1,11 +1,11 @@
 {
     "type": "filament",
+    "name": "Generic PA @BBL P1P",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
     "filament_id": "GFN99",
     "setting_id": "GFSN98_10",
-    "name": "Generic PA @BBL P1P",
-    "from": "system",
     "instantiation": "true",
-    "inherits": "fdm_filament_pa",
     "filament_max_volumetric_speed": [
         "16"
     ],
@@ -21,9 +21,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json
index 860fcfe3f..1e17c278c 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json	
@@ -1,11 +1,11 @@
 {
     "type": "filament",
+    "name": "Generic PA-CF @BBL P1P",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
     "filament_id": "GFN98",
     "setting_id": "GFSN99_10",
-    "name": "Generic PA-CF @BBL P1P",
-    "from": "system",
     "instantiation": "true",
-    "inherits": "fdm_filament_pa",
     "fan_cooling_layer_time": [
         "5"
     ],
@@ -30,9 +30,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json
index 74af74bfd..9a08a5b75 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC99_01",
     "name": "Generic PC @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PC @base",
+    "from": "system",
+    "setting_id": "GFSC99_01",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json
index e50fc9108..e49796dae 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSC99_02",
     "name": "Generic PC @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PC @base",
+    "from": "system",
+    "setting_id": "GFSC99_02",
+    "instantiation": "true",
     "eng_plate_temp": [
         "100"
     ],
@@ -32,9 +32,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json
index db1f53f37..317c0d0ac 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,13 @@
 {
     "type": "filament",
-    "setting_id": "GFSG99_11",
     "name": "Generic PETG @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PETG @base",
+    "from": "system",
+    "setting_id": "GFSG99_11",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
     "hot_plate_temp": [
         "80"
     ],
@@ -17,11 +20,7 @@
     "textured_plate_temp_initial_layer": [
         "80"
     ],
-    "filament_max_volumetric_speed": [
-        "1"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json
index 276cc885a..c50407cac 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG99_10",
     "name": "Generic PETG @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PETG @base",
+    "from": "system",
+    "setting_id": "GFSG99_10",
+    "instantiation": "true",
     "hot_plate_temp": [
         "80"
     ],
@@ -20,9 +20,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json
new file mode 100644
index 000000000..927e83952
--- /dev/null
+++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Generic PETG-CF @BBL A1M",
+    "inherits": "Generic PETG-CF @BBL P1P",
+    "from": "system",
+    "setting_id": "GFSG98_00",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json
index 573778bb6..bf4c3ae6d 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json	
@@ -1,16 +1,13 @@
 {
     "type": "filament",
-    "setting_id": "GFSG50_10",
     "name": "Generic PETG-CF @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PETG-CF @base",
+    "from": "system",
+    "setting_id": "GFSG50_10",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json
index ebdcae89c..7e5aa202a 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json	
@@ -1,16 +1,19 @@
 {
     "type": "filament",
-    "setting_id": "GFSL99_11",
     "name": "Generic PLA @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA @base",
+    "from": "system",
+    "setting_id": "GFSL99_11",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}"
-    ],
     "hot_plate_temp": [
         "65"
     ],
@@ -23,14 +26,10 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json
index 18fc1a489..9315248c4 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSL99_10",
     "name": "Generic PLA @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA @base",
+    "from": "system",
+    "setting_id": "GFSL99_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "hot_plate_temp": [
         "65"
     ],
@@ -17,18 +23,9 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json
index f12568c50..3be985030 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL99_12",
     "name": "Generic PLA Silk @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA Silk @base",
+    "from": "system",
+    "setting_id": "GFSL99_12",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "7.5"
     ],
@@ -14,9 +14,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json
index 0dbaeeb92..6cfee5a5e 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL98_10",
     "name": "Generic PLA-CF @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PLA-CF @base",
+    "from": "system",
+    "setting_id": "GFSL98_10",
+    "instantiation": "true",
     "hot_plate_temp": [
         "65"
     ],
@@ -20,9 +20,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json
index 3fe2402aa..b8635c757 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSS99_11",
     "name": "Generic PVA @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PVA @base",
+    "from": "system",
+    "setting_id": "GFSS99_11",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "0.5"
     ],
@@ -21,7 +21,6 @@
         "65"
     ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json
index 60182d5cf..b7b0ea780 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json	
@@ -1,15 +1,15 @@
 {
     "type": "filament",
-    "setting_id": "GFSS99_10",
     "name": "Generic PVA @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Generic PVA @base",
-    "textured_plate_temp": [
-        "65"
+    "from": "system",
+    "setting_id": "GFSS99_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
     ],
-    "textured_plate_temp_initial_layer": [
-        "65"
+    "fan_min_speed": [
+        "50"
     ],
     "hot_plate_temp": [
         "65"
@@ -17,18 +17,15 @@
     "hot_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
+    "textured_plate_temp": [
+        "65"
     ],
-    "fan_cooling_layer_time": [
-        "80"
+    "textured_plate_temp_initial_layer": [
+        "65"
     ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json
index 53dcfa10c..effdb2d7f 100644
--- a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json	
@@ -1,17 +1,14 @@
 {
     "type": "filament",
+    "name": "Generic TPU @BBL P1P",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
     "filament_id": "GFU99",
     "setting_id": "GFSR99_10",
-    "name": "Generic TPU @BBL P1P",
-    "from": "system",
     "instantiation": "true",
-    "inherits": "fdm_filament_tpu",
     "filament_max_volumetric_speed": [
         "3.2"
     ],
-    "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}"
-    ],
     "hot_plate_temp": [
         "45"
     ],
@@ -27,9 +24,9 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json
index 179ccb6c6..70619f528 100644
--- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSL25_10",
     "name": "PolyLite PLA @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PLA @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSL25_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
@@ -20,14 +26,7 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json
index 0195aba6f..8430df529 100644
--- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json	
@@ -1,40 +1,37 @@
 {
     "type": "filament",
-    "setting_id": "GFSL23_10",
     "name": "PolyLite PLA @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PLA @base",
+    "from": "system",
+    "setting_id": "GFSL23_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
-    "slow_down_layer_time": [
-        "8"
-    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json
index 576c2cd7f..789062def 100644
--- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,16 @@
 {
     "type": "filament",
-    "setting_id": "GFSL24_10",
     "name": "PolyTerra PLA @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyTerra PLA @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSL24_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
@@ -20,14 +26,7 @@
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json
index 5a132e511..7504020d8 100644
--- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json	
@@ -1,40 +1,37 @@
 {
     "type": "filament",
-    "setting_id": "GFSL22_10",
     "name": "PolyTerra PLA @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyTerra PLA @base",
+    "from": "system",
+    "setting_id": "GFSL22_10",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
-    "slow_down_layer_time": [
-        "8"
-    ],
     "hot_plate_temp": [
         "65"
     ],
     "hot_plate_temp_initial_layer": [
         "65"
     ],
+    "slow_down_layer_time": [
+        "8"
+    ],
     "textured_plate_temp": [
         "65"
     ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
-    "fan_min_speed": [
-        "50"
-    ],
-    "fan_cooling_layer_time": [
-        "80"
-    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json
index 182749a87..154a347fd 100644
--- a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL03_10",
     "name": "eSUN PLA+ @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "GFSL03_10",
+    "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
     ],
@@ -27,7 +27,6 @@
         "65"
     ],
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json
index 62c74ba28..a2523d3f5 100644
--- a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL03_11",
     "name": "eSUN PLA+ @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "GFSL03_11",
+    "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
     ],
@@ -29,9 +29,6 @@
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
-        "Bambu Lab P1P 0.8 nozzle",
-        "Bambu Lab N1 0.6 nozzle",
-        "Bambu Lab N1 0.4 nozzle",
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json
index e046dc124..82d325cab 100644
--- a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB60_05",
     "name": "PolyLite ABS @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ABS @BBL P1P",
+    "from": "system",
+    "setting_id": "GFSB60_05",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json
index e58c10107..264eaa67c 100644
--- a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB60_04",
     "name": "PolyLite ABS @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ABS @base",
+    "from": "system",
+    "setting_id": "GFSB60_04",
+    "instantiation": "true",
     "fan_max_speed": [
         "20"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json
index 75e9e7d63..fe96accbf 100644
--- a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB60_02",
     "name": "PolyLite ABS @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ABS @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSB60_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json
index 19b036561..c3738bc33 100644
--- a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB60_00",
     "name": "PolyLite ABS @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ABS @base",
+    "from": "system",
+    "setting_id": "GFSB60_00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/PolyLite ABS @base.json b/resources/profiles/BBL/filament/PolyLite ABS @base.json
index fcbc279de..e722c94f0 100644
--- a/resources/profiles/BBL/filament/PolyLite ABS @base.json	
+++ b/resources/profiles/BBL/filament/PolyLite ABS @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFB60",
     "name": "PolyLite ABS @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "GFB60",
+    "instantiation": "false",
     "filament_cost": [
         "26.9"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json
index a8b65e8e2..a40ce5372 100644
--- a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB61_05",
     "name": "PolyLite ASA @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ASA @BBL P1P",
+    "from": "system",
+    "setting_id": "GFSB61_05",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json
index ee74fd0dc..2b00174b2 100644
--- a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB61_04",
     "name": "PolyLite ASA @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ASA @base",
+    "from": "system",
+    "setting_id": "GFSB61_04",
+    "instantiation": "true",
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json
index dfd4ea99d..16bc0ad8e 100644
--- a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB61_01",
     "name": "PolyLite ASA @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ASA @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSB61_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json
index 0aef30b6a..3380230fd 100644
--- a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSB61_00",
     "name": "PolyLite ASA @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite ASA @base",
+    "from": "system",
+    "setting_id": "GFSB61_00",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/PolyLite ASA @base.json b/resources/profiles/BBL/filament/PolyLite ASA @base.json
index a01b2a5f2..169e38c12 100644
--- a/resources/profiles/BBL/filament/PolyLite ASA @base.json	
+++ b/resources/profiles/BBL/filament/PolyLite ASA @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFB61",
     "name": "PolyLite ASA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB61",
+    "instantiation": "false",
     "filament_cost": [
         "23.6"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..a7cc88d94
--- /dev/null
+++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "PolyLite PETG @BBL A1M 0.2 nozzle",
+    "inherits": "PolyLite PETG @BBL A1M",
+    "from": "system",
+    "setting_id": "GFSG60_05",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json
new file mode 100644
index 000000000..81ade454b
--- /dev/null
+++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "PolyLite PETG @BBL A1M",
+    "inherits": "PolyLite PETG @base",
+    "from": "system",
+    "setting_id": "GFSG60_04",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json
index b309d08c5..a8a418a64 100644
--- a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG60_03",
     "name": "PolyLite PETG @BBL P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PETG @BBL P1P",
+    "from": "system",
+    "setting_id": "GFSG60_03",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json
index 4f71a2642..9d3d62773 100644
--- a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG60_02",
     "name": "PolyLite PETG @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PETG @base",
+    "from": "system",
+    "setting_id": "GFSG60_02",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "11"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json
index b8e593992..9a58b91bf 100644
--- a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG60_01",
     "name": "PolyLite PETG @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PETG @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSG60_01",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json
index d23903276..ea9688b83 100644
--- a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSG60_00",
     "name": "PolyLite PETG @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PETG @base",
+    "from": "system",
+    "setting_id": "GFSG60_00",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "11"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PETG @base.json b/resources/profiles/BBL/filament/PolyLite PETG @base.json
index 22964406d..60c9451a5 100644
--- a/resources/profiles/BBL/filament/PolyLite PETG @base.json	
+++ b/resources/profiles/BBL/filament/PolyLite PETG @base.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFG60",
     "name": "PolyLite PETG @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG60",
+    "instantiation": "false",
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..ff991970c
--- /dev/null
+++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "PolyLite PLA @BBL A1M 0.2 nozzle",
+    "inherits": "PolyLite PLA @base",
+    "from": "system",
+    "setting_id": "GFSL00_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json
new file mode 100644
index 000000000..a07bb0110
--- /dev/null
+++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "name": "PolyLite PLA @BBL A1M",
+    "inherits": "PolyLite PLA @base",
+    "from": "system",
+    "setting_id": "GFSL00_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json
index 6b5561966..4ed582192 100644
--- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json	
+++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL23",
     "name": "PolyLite PLA @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PLA @base",
+    "from": "system",
+    "setting_id": "GFSL23",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "15"
     ],
@@ -16,4 +16,4 @@
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json
index f8ec37a8e..353f029cb 100644
--- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL25",
     "name": "PolyLite PLA @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PLA @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSL25",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json
index 8f039164a..e214da24d 100644
--- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL19",
     "name": "PolyLite PLA @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyLite PLA @base",
+    "from": "system",
+    "setting_id": "GFSL19",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "15"
     ],
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @base.json b/resources/profiles/BBL/filament/PolyLite PLA @base.json
index f8914467e..1e7f4d16b 100644
--- a/resources/profiles/BBL/filament/PolyLite PLA @base.json	
+++ b/resources/profiles/BBL/filament/PolyLite PLA @base.json	
@@ -1,17 +1,17 @@
 {
     "type": "filament",
-    "filament_id": "GFL00",
     "name": "PolyLite PLA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Polymaker"
-    ],
+    "from": "system",
+    "filament_id": "GFL00",
+    "instantiation": "false",
     "filament_cost": [
         "25.4"
     ],
     "filament_flow_ratio": [
         "0.95"
+    ],
+    "filament_vendor": [
+        "Polymaker"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..73d3ce1a8
--- /dev/null
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "PolyTerra PLA @BBL A1M 0.2 nozzle",
+    "inherits": "PolyTerra PLA @base",
+    "from": "system",
+    "setting_id": "GFSL01_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json
new file mode 100644
index 000000000..288e5e938
--- /dev/null
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json	
@@ -0,0 +1,40 @@
+{
+    "type": "filament",
+    "name": "PolyTerra PLA @BBL A1M",
+    "inherits": "PolyTerra PLA @base",
+    "from": "system",
+    "setting_id": "GFSL01_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json
index 19b82baf4..d3fd2251c 100644
--- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json	
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL22",
     "name": "PolyTerra PLA @BBL X1",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyTerra PLA @base",
+    "from": "system",
+    "setting_id": "GFSL22",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "22"
     ],
@@ -16,4 +16,4 @@
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json
index 82e80205e..123f71d69 100644
--- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL24",
     "name": "PolyTerra PLA @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyTerra PLA @BBL X1C",
+    "from": "system",
+    "setting_id": "GFSL24",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json
index cf3a62a56..2925ff8bb 100644
--- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json	
@@ -1,10 +1,10 @@
 {
     "type": "filament",
-    "setting_id": "GFSL18",
     "name": "PolyTerra PLA @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "PolyTerra PLA @base",
+    "from": "system",
+    "setting_id": "GFSL18",
+    "instantiation": "true",
     "filament_max_volumetric_speed": [
         "22"
     ],
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @base.json b/resources/profiles/BBL/filament/PolyTerra PLA @base.json
index 16a29aa51..2deb2d914 100644
--- a/resources/profiles/BBL/filament/PolyTerra PLA @base.json	
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @base.json	
@@ -1,13 +1,10 @@
 {
     "type": "filament",
-    "filament_id": "GFL01",
     "name": "PolyTerra PLA @base",
-    "from": "system",
-    "instantiation": "false",
     "inherits": "fdm_filament_pla",
-    "filament_vendor": [
-        "Polymaker"
-    ],
+    "from": "system",
+    "filament_id": "GFL01",
+    "instantiation": "false",
     "filament_cost": [
         "25.4"
     ],
@@ -16,5 +13,8 @@
     ],
     "filament_flow_ratio": [
         "0.98"
+    ],
+    "filament_vendor": [
+        "Polymaker"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..96573934d
--- /dev/null
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "eSUN PLA+ @BBL A1M 0.2 nozzle",
+    "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "GFSL03_04",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json
new file mode 100644
index 000000000..92a72de8f
--- /dev/null
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "eSUN PLA+ @BBL A1M",
+    "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "GFSL03_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json
index 392b133fd..fca65e947 100644
--- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json	
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json	
@@ -1,16 +1,16 @@
 {
-  "type": "filament",
-  "setting_id": "GFSL03_02",
-  "name": "eSUN PLA+ @BBL X1",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "eSUN PLA+ @base",
-  "slow_down_layer_time": [
-      "10"
-  ],
-  "compatible_printers": [
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab X1 0.6 nozzle",
-      "Bambu Lab X1 0.8 nozzle"
-  ]
+    "type": "filament",
+    "name": "eSUN PLA+ @BBL X1",
+    "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "GFSL03_02",
+    "instantiation": "true",
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json
index 5e0826b74..25394b7ff 100644
--- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json	
@@ -1,16 +1,16 @@
 {
-  "type": "filament",
-  "setting_id": "GFSL03_01",
-  "name": "eSUN PLA+ @BBL X1C 0.2 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "eSUN PLA+ @base",
-  "filament_max_volumetric_speed": [
-      "1"
-  ],
-  "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.2 nozzle",
-      "Bambu Lab X1 0.2 nozzle",
-      "Bambu Lab P1S 0.2 nozzle"
-  ]
+    "type": "filament",
+    "name": "eSUN PLA+ @BBL X1C 0.2 nozzle",
+    "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "GFSL03_01",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json
index 8b37f3fc6..686d1dd3c 100644
--- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json	
@@ -1,16 +1,16 @@
 {
-  "type": "filament",
-  "setting_id": "GFSL03_00",
-  "name": "eSUN PLA+ @BBL X1C",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "eSUN PLA+ @base",
-  "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 Carbon 0.6 nozzle",
-      "Bambu Lab X1 Carbon 0.8 nozzle",
-      "Bambu Lab P1S 0.4 nozzle",
-      "Bambu Lab P1S 0.6 nozzle",
-      "Bambu Lab P1S 0.8 nozzle"
-  ]
+    "type": "filament",
+    "name": "eSUN PLA+ @BBL X1C",
+    "inherits": "eSUN PLA+ @base",
+    "from": "system",
+    "setting_id": "GFSL03_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @base.json b/resources/profiles/BBL/filament/eSUN PLA+ @base.json
index 160bd7fb4..6219d2456 100644
--- a/resources/profiles/BBL/filament/eSUN PLA+ @base.json	
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @base.json	
@@ -1,29 +1,29 @@
 {
-  "type": "filament",
-  "filament_id": "GFL03",
-  "name": "eSUN PLA+ @base",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_filament_pla",
-  "filament_vendor": [
-      "eSUN"
-  ],
-  "filament_cost": [
-      "22.99"
-  ],
-  "filament_density": [
-      "1.25"
-  ],
-  "filament_flow_ratio": [
-      "0.98"
-  ],
-  "slow_down_layer_time": [
-      "6"
-  ],
-  "filament_max_volumetric_speed": [
-      "16"
-  ],
-  "filament_start_gcode": [
-    "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
-  ]
+    "type": "filament",
+    "name": "eSUN PLA+ @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFL03",
+    "instantiation": "false",
+    "filament_cost": [
+        "22.99"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_vendor": [
+        "eSUN"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_abs.json b/resources/profiles/BBL/filament/fdm_filament_abs.json
index 16497a718..461dd5e61 100644
--- a/resources/profiles/BBL/filament/fdm_filament_abs.json
+++ b/resources/profiles/BBL/filament/fdm_filament_abs.json
@@ -1,88 +1,82 @@
 {
     "type": "filament",
     "name": "fdm_filament_abs",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
-    "cool_plate_temp" : [
-        "0"
-    ],
-    "eng_plate_temp" : [
-        "90"
-    ],
-    "hot_plate_temp" : [
-        "90"
-    ],
-    "textured_plate_temp" : [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer" : [
-        "0"
-    ],
-    "eng_plate_temp_initial_layer" : [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer" : [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer" : [
-        "90"
-    ],
-    "slow_down_for_layer_cooling": [
+    "activate_air_filtration": [
         "1"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "90"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "90"
     ],
     "fan_cooling_layer_time": [
         "30"
     ],
-    "filament_max_volumetric_speed": [
-        "28.6"
-    ],
-    "filament_type": [
-        "ABS"
-    ],
-    "filament_density": [
-        "1.04"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
     "fan_max_speed": [
         "80"
     ],
     "fan_min_speed": [
         "10"
     ],
-    "overhang_fan_threshold": [
-        "25%"
+    "filament_cost": [
+        "20"
     ],
-    "overhang_fan_speed": [
-        "80"
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ABS"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
     ],
     "nozzle_temperature": [
         "270"
     ],
-    "temperature_vitrification": [
-        "100"
-    ],
-    "nozzle_temperature_range_low": [
-        "240"
+    "nozzle_temperature_initial_layer": [
+        "260"
     ],
     "nozzle_temperature_range_high": [
         "280"
     ],
-    "slow_down_min_speed": [
-        "20"
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
     ],
     "slow_down_layer_time": [
         "3"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "textured_plate_temp": [
+        "90"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "90"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_asa.json b/resources/profiles/BBL/filament/fdm_filament_asa.json
index 1828f9688..ac7a9294c 100644
--- a/resources/profiles/BBL/filament/fdm_filament_asa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_asa.json
@@ -1,79 +1,82 @@
 {
     "type": "filament",
     "name": "fdm_filament_asa",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
+    "activate_air_filtration": [
+        "1"
+    ],
     "cool_plate_temp": [
         "0"
     ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
     "eng_plate_temp": [
         "90"
     ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "textured_plate_temp": [
-        "90"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
     "eng_plate_temp_initial_layer": [
         "90"
     ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "90"
-    ],
     "fan_cooling_layer_time": [
         "35"
     ],
-    "filament_max_volumetric_speed": [
-        "28.6"
-    ],
-    "filament_type": [
-        "ASA"
-    ],
-    "filament_density": [
-        "1.04"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "260"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
     "fan_max_speed": [
         "80"
     ],
     "fan_min_speed": [
         "10"
     ],
-    "overhang_fan_threshold": [
-        "25%"
+    "filament_cost": [
+        "20"
     ],
-    "overhang_fan_speed": [
-        "80"
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_max_volumetric_speed": [
+        "28.6"
+    ],
+    "filament_type": [
+        "ASA"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
     ],
     "nozzle_temperature": [
         "260"
     ],
-    "nozzle_temperature_range_low": [
-        "240"
+    "nozzle_temperature_initial_layer": [
+        "260"
     ],
     "nozzle_temperature_range_high": [
         "280"
     ],
-    "slow_down_min_speed": [
-        "20"
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
     ],
     "slow_down_layer_time": [
         "3"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "textured_plate_temp": [
+        "90"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "90"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json
index 8ea752f4d..3773ade02 100644
--- a/resources/profiles/BBL/filament/fdm_filament_common.json
+++ b/resources/profiles/BBL/filament/fdm_filament_common.json
@@ -3,60 +3,42 @@
     "name": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "filament_is_support": [
+    "activate_air_filtration": [
         "0"
     ],
-    "required_nozzle_HRC": [
+    "chamber_temperatures": [
+        "0"
+    ],
+    "close_fan_the_first_x_layers": [
         "3"
     ],
+    "complete_print_exhaust_fan_speed": [
+        "80"
+    ],
     "cool_plate_temp": [
         "60"
     ],
-    "eng_plate_temp": [
-        "60"
-    ],
-    "hot_plate_temp": [
-        "60"
-    ],
-    "textured_plate_temp": [
-        "60"
-    ],
     "cool_plate_temp_initial_layer": [
         "60"
     ],
+    "during_print_exhaust_fan_speed": [
+        "60"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
     "eng_plate_temp_initial_layer": [
         "60"
     ],
-    "hot_plate_temp_initial_layer": [
-        "60"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "60"
-    ],
-    "overhang_fan_threshold": [
-        "95%"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
-    "filament_end_gcode": [
-        "; filament end gcode \nM106 P3 S0\n"
-    ],
-    "filament_flow_ratio": [
-        "1"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "0"
-    ],
     "fan_cooling_layer_time": [
         "60"
     ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "35"
+    ],
     "filament_cost": [
         "0"
     ],
@@ -69,16 +51,22 @@
     "filament_diameter": [
         "1.75"
     ],
+    "filament_flow_ratio": [
+        "1"
+    ],
+    "filament_is_support": [
+        "0"
+    ],
     "filament_max_volumetric_speed": [
         "0"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"
     ],
-    "filament_retraction_minimum_travel": [
+    "filament_retract_before_wipe": [
         "nil"
     ],
-    "filament_retract_before_wipe": [
+    "filament_retract_restart_extra": [
         "nil"
     ],
     "filament_retract_when_changing_layer": [
@@ -87,13 +75,7 @@
     "filament_retraction_length": [
         "nil"
     ],
-    "filament_z_hop": [
-        "nil"
-    ],
-    "filament_z_hop_types": [
-        "nil"
-    ],
-    "filament_retract_restart_extra": [
+    "filament_retraction_minimum_travel": [
         "nil"
     ],
     "filament_retraction_speed": [
@@ -117,32 +99,62 @@
     "filament_wipe_distance": [
         "nil"
     ],
-    "nozzle_temperature_initial_layer": [
-        "200"
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "nil"
     ],
     "full_fan_speed_layer": [
         "0"
     ],
-    "fan_max_speed": [
-        "100"
+    "hot_plate_temp": [
+        "60"
     ],
-    "fan_min_speed": [
-        "35"
-    ],
-    "slow_down_min_speed": [
-        "10"
-    ],
-    "slow_down_layer_time": [
-        "8"
-    ],
-    "filament_start_gcode": [
-        "; Filament gcode\n"
+    "hot_plate_temp_initial_layer": [
+        "60"
     ],
     "nozzle_temperature": [
         "200"
     ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
     "temperature_vitrification": [
         "100"
     ],
-    "compatible_printers":[]
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "compatible_printers": [],
+    "filament_start_gcode": [
+        "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \nM106 P3 S0\n"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_hips.json b/resources/profiles/BBL/filament/fdm_filament_hips.json
index be50ef8fc..4d1b09d37 100644
--- a/resources/profiles/BBL/filament/fdm_filament_hips.json
+++ b/resources/profiles/BBL/filament/fdm_filament_hips.json
@@ -1,85 +1,79 @@
 {
-  "type": "filament",
-  "name": "fdm_filament_hips",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_filament_common",
-  "cool_plate_temp": [
-      "0"
-  ],
-  "eng_plate_temp": [
-      "90"
-  ],
-  "hot_plate_temp": [
-      "90"
-  ],
-  "textured_plate_temp": [
-      "90"
-  ],
-  "cool_plate_temp_initial_layer": [
-      "0"
-  ],
-  "eng_plate_temp_initial_layer": [
-      "90"
-  ],
-  "hot_plate_temp_initial_layer": [
-      "90"
-  ],
-  "textured_plate_temp_initial_layer": [
-      "90"
-  ],
-  "fan_cooling_layer_time": [
-      "10"
-  ],
-  "filament_max_volumetric_speed": [
-      "8"
-  ],
-  "filament_type": [
-      "HIPS"
-  ],
-  "filament_density": [
-      "1.06"
-  ],
-  "filament_cost": [
-      "22.99"
-  ],
-  "nozzle_temperature_initial_layer": [
-      "240"
-  ],
-  "fan_max_speed": [
-      "60"
-  ],
-  "fan_min_speed": [
-      "0"
-  ],
-  "overhang_fan_threshold": [
-      "25%"
-  ],
-  "overhang_fan_speed": [
-      "80"
-  ],
-  "nozzle_temperature": [
-      "240"
-  ],
-  "nozzle_temperature_range_low": [
-      "220"
-  ],
-  "nozzle_temperature_range_high": [
-      "270"
-  ],
-  "slow_down_min_speed": [
-      "20"
-  ],
-  "slow_down_layer_time": [
-      "6"
-  ],
-  "temperature_vitrification": [
-    "100"
-  ],
-  "required_nozzle_HRC": [
-    "3"
-  ],
-  "additional_cooling_fan_speed":[
-    "0"
-  ]
+    "type": "filament",
+    "name": "fdm_filament_hips",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "90"
+    ],
+    "hot_plate_temp": [
+        "90"
+    ],
+    "textured_plate_temp": [
+        "90"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "90"
+    ],
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "HIPS"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_cost": [
+        "22.99"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "240"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_pa.json b/resources/profiles/BBL/filament/fdm_filament_pa.json
index 89d268af2..1cd78ec77 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pa.json
@@ -1,79 +1,82 @@
 {
     "type": "filament",
     "name": "fdm_filament_pa",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
-    "required_nozzle_HRC": [
-        "40"
+    "activate_air_filtration": [
+        "1"
     ],
     "cool_plate_temp": [
         "0"
     ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
     "eng_plate_temp": [
         "100"
     ],
-    "hot_plate_temp": [
-        "100"
-    ],
-    "textured_plate_temp": [
-        "100"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "0"
-    ],
     "eng_plate_temp_initial_layer": [
         "100"
     ],
-    "hot_plate_temp_initial_layer": [
-        "100"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "100"
-    ],
     "fan_cooling_layer_time": [
         "4"
     ],
-    "filament_max_volumetric_speed": [
-        "8"
-    ],
-    "filament_type": [
-        "PA"
-    ],
-    "filament_density": [
-        "1.04"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "290"
-    ],
     "fan_max_speed": [
         "60"
     ],
     "fan_min_speed": [
         "0"
     ],
-    "overhang_fan_speed": [
-        "30"
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.04"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "PA"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
     ],
     "nozzle_temperature": [
         "290"
     ],
-    "temperature_vitrification": [
-        "108"
-    ],
-    "nozzle_temperature_range_low": [
-        "260"
+    "nozzle_temperature_initial_layer": [
+        "290"
     ],
     "nozzle_temperature_range_high": [
         "300"
     ],
-    "slow_down_min_speed": [
-        "20"
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "30"
+    ],
+    "required_nozzle_HRC": [
+        "40"
     ],
     "slow_down_layer_time": [
         "2"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "108"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_pc.json b/resources/profiles/BBL/filament/fdm_filament_pc.json
index 477812e6d..572911429 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pc.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pc.json
@@ -1,9 +1,9 @@
 {
     "type": "filament",
     "name": "fdm_filament_pc",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pet.json b/resources/profiles/BBL/filament/fdm_filament_pet.json
index e71333f63..4a5f6085c 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pet.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pet.json
@@ -1,64 +1,64 @@
 {
     "type": "filament",
     "name": "fdm_filament_pet",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
     "eng_plate_temp": [
         "0"
     ],
-    "hot_plate_temp": [
-        "80"
-    ],
-    "textured_plate_temp": [
-        "80"
-    ],
     "eng_plate_temp_initial_layer": [
         "0"
     ],
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "80"
-    ],
     "fan_cooling_layer_time": [
         "20"
     ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
     "filament_max_volumetric_speed": [
         "25"
     ],
     "filament_type": [
         "PETG"
     ],
-    "filament_density": [
-        "1.27"
+    "hot_plate_temp": [
+        "80"
     ],
-    "filament_cost": [
-        "30"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "255"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "fan_min_speed": [
-        "20"
+    "hot_plate_temp_initial_layer": [
+        "80"
     ],
     "nozzle_temperature": [
         "255"
     ],
-    "temperature_vitrification": [
-        "70"
-    ],
-    "nozzle_temperature_range_low": [
-        "220"
+    "nozzle_temperature_initial_layer": [
+        "255"
     ],
     "nozzle_temperature_range_high": [
         "260"
     ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "80"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming"
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json
index b90eebee8..822882710 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pla.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pla.json
@@ -1,46 +1,43 @@
 {
     "type": "filament",
     "name": "fdm_filament_pla",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
     "fan_cooling_layer_time": [
         "100"
     ],
     "filament_max_volumetric_speed": [
         "12"
     ],
-    "filament_type": [
-        "PLA"
-    ],
     "filament_density": [
         "1.24"
     ],
     "filament_cost": [
         "20"
     ],
-    "cool_plate_temp" : [
+    "cool_plate_temp": [
         "35"
     ],
-    "eng_plate_temp" : [
+    "eng_plate_temp": [
         "0"
     ],
-    "hot_plate_temp" : [
+    "hot_plate_temp": [
         "55"
     ],
-    "textured_plate_temp" : [
+    "textured_plate_temp": [
         "55"
     ],
-    "cool_plate_temp_initial_layer" : [
+    "cool_plate_temp_initial_layer": [
         "35"
     ],
-    "eng_plate_temp_initial_layer" : [
+    "eng_plate_temp_initial_layer": [
         "0"
     ],
-    "hot_plate_temp_initial_layer" : [
+    "hot_plate_temp_initial_layer": [
         "55"
     ],
-    "textured_plate_temp_initial_layer" : [
+    "textured_plate_temp_initial_layer": [
         "55"
     ],
     "nozzle_temperature_initial_layer": [
@@ -49,18 +46,9 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
-    "slow_down_for_layer_cooling": [
-        "1"
-    ],
-    "fan_max_speed": [
-        "100"
-    ],
     "fan_min_speed": [
         "100"
     ],
-    "overhang_fan_speed": [
-        "100"
-    ],
     "overhang_fan_threshold": [
         "50%"
     ],
@@ -89,6 +77,6 @@
         "70"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json
index 4253f3616..870a18368 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pva.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pva.json
@@ -1,91 +1,91 @@
 {
     "type": "filament",
     "name": "fdm_filament_pva",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
     "cool_plate_temp": [
         "45"
     ],
+    "cool_plate_temp_initial_layer": [
+        "45"
+    ],
     "eng_plate_temp": [
         "0"
     ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "45"
-    ],
     "eng_plate_temp_initial_layer": [
         "0"
     ],
-    "hot_plate_temp_initial_layer": [
-        "55"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "55"
-    ],
     "fan_cooling_layer_time": [
         "100"
     ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
     "filament_soluble": [
         "1"
     ],
-    "filament_is_support": [
-        "1"
-    ],
     "filament_type": [
         "PVA"
     ],
-    "filament_density": [
-        "1.24"
+    "hot_plate_temp": [
+        "55"
     ],
-    "filament_cost": [
-        "20"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "220"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
-    "overhang_fan_threshold": [
-        "50%"
-    ],
-    "close_fan_the_first_x_layers": [
-        "1"
+    "hot_plate_temp_initial_layer": [
+        "55"
     ],
     "nozzle_temperature": [
         "220"
     ],
-    "temperature_vitrification": [
-        "55"
-    ],
-    "nozzle_temperature_range_low": [
-        "190"
+    "nozzle_temperature_initial_layer": [
+        "220"
     ],
     "nozzle_temperature_range_high": [
         "240"
     ],
-    "slow_down_min_speed": [
-        "50"
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
     ],
     "slow_down_layer_time": [
         "4"
     ],
-    "additional_cooling_fan_speed": [
-        "70"
+    "slow_down_min_speed": [
+        "50"
+    ],
+    "temperature_vitrification": [
+        "55"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json
index 5c490e0af..126c10139 100644
--- a/resources/profiles/BBL/filament/fdm_filament_tpu.json
+++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json
@@ -1,79 +1,79 @@
 {
     "type": "filament",
     "name": "fdm_filament_tpu",
+    "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_filament_common",
-    "cool_plate_temp": [
-        "30"
-    ],
-    "eng_plate_temp": [
-        "30"
-    ],
-    "hot_plate_temp": [
-        "35"
-    ],
-    "textured_plate_temp": [
-        "35"
-    ],
-    "cool_plate_temp_initial_layer": [
-        "30"
-    ],
-    "eng_plate_temp_initial_layer": [
-        "30"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "35"
-    ],
-    "textured_plate_temp_initial_layer": [
-        "35"
-    ],
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "filament_max_volumetric_speed": [
-        "15"
-    ],
-    "filament_type": [
-        "TPU"
-    ],
-    "filament_density": [
-        "1.24"
-    ],
-    "filament_cost": [
-        "20"
-    ],
-    "filament_retraction_length": [
-        "0.4"
-    ],
-    "nozzle_temperature_initial_layer": [
-        "240"
-    ],
-    "reduce_fan_stop_start_freq": [
-        "1"
-    ],
-    "fan_min_speed": [
-        "100"
-    ],
     "additional_cooling_fan_speed": [
         "70"
     ],
     "close_fan_the_first_x_layers": [
         "1"
     ],
+    "cool_plate_temp": [
+        "30"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "30"
+    ],
+    "eng_plate_temp": [
+        "30"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "30"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "filament_type": [
+        "TPU"
+    ],
+    "hot_plate_temp": [
+        "35"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "35"
+    ],
     "nozzle_temperature": [
         "240"
     ],
-    "temperature_vitrification": [
-        "35"
-    ],
-    "nozzle_temperature_range_low": [
-        "200"
+    "nozzle_temperature_initial_layer": [
+        "240"
     ],
     "nozzle_temperature_range_high": [
         "250"
     ],
+    "nozzle_temperature_range_low": [
+        "200"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "35"
+    ],
+    "textured_plate_temp": [
+        "35"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "35"
+    ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}"
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab N1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json
similarity index 69%
rename from resources/profiles/BBL/machine/Bambu Lab N1 0.2 nozzle.json
rename to resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json
index 0f6d98134..d8cea9951 100644
--- a/resources/profiles/BBL/machine/Bambu Lab N1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json	
@@ -1,19 +1,19 @@
 {
     "type": "machine",
-    "setting_id": "GM021",
-    "name": "Bambu Lab N1 0.2 nozzle",
+    "name": "Bambu Lab A1 mini 0.2 nozzle",
+    "inherits": "Bambu Lab A1 mini 0.4 nozzle",
     "from": "system",
+    "setting_id": "GM021",
     "instantiation": "true",
-    "inherits": "Bambu Lab N1 0.4 nozzle",
     "nozzle_diameter": [
         "0.2"
     ],
-    "printer_model": "Bambu Lab N1",
+    "printer_model": "Bambu Lab A1 mini",
     "printer_variant": "0.2",
     "default_filament_profile": [
-        "Bambu PLA Basic @BBL X1C 0.2 nozzle"
+        "Bambu PLA Basic @BBL A1M 0.2 nozzle"
     ],
-    "default_print_profile": "0.10mm Standard @BBL N1 0.2 nozzle",
+    "default_print_profile": "0.10mm Standard @BBL A1M 0.2 nozzle",
     "max_layer_height": [
         "0.14"
     ],
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json
new file mode 100644
index 000000000..86c04cbca
--- /dev/null
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json	
@@ -0,0 +1,61 @@
+{
+    "type": "machine",
+    "name": "Bambu Lab A1 mini 0.4 nozzle",
+    "inherits": "fdm_bbl_3dp_001_common",
+    "from": "system",
+    "setting_id": "GM020",
+    "instantiation": "true",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_model": "Bambu Lab A1 mini",
+    "printer_variant": "0.4",
+    "auxiliary_fan": "0",
+    "bed_exclude_area": [],
+    "default_filament_profile": [
+        "Bambu PLA Basic @BBL A1M"
+    ],
+    "default_print_profile": "0.20mm Standard @BBL A1M",
+    "extruder_clearance_height_to_rod": "25",
+    "extruder_clearance_max_radius": "73",
+    "extruder_clearance_radius": "73",
+    "machine_load_filament_time": "13",
+    "machine_max_acceleration_z": [
+        "1500",
+        "1500"
+    ],
+    "machine_max_jerk_e": [
+        "3",
+        "3"
+    ],
+    "machine_max_jerk_z": [
+        "5",
+        "5"
+    ],
+    "machine_max_speed_z": [
+        "30",
+        "30"
+    ],
+    "machine_unload_filament_time": "19",
+    "nozzle_type": "stainless_steel",
+    "nozzle_volume": "32",
+    "printable_area": [
+        "0x0",
+        "180x0",
+        "180x180",
+        "0x180"
+    ],
+    "printable_height": "180",
+    "printer_structure": "i3",
+    "scan_first_layer": "0",
+    "upward_compatible_machine": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle"
+    ],
+    "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20230905 =====================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG39.2 S0 ;turn off clog detect\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S2 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\n;M221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 1\nM400\nM18\nM109 S100\nM104 S140\nM400\nM17\nM400\nG28 X\n\nM221 X0 Y0 Z0 ;turn off soft endstop\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    G39.2 S1 ;turn on clog detect\n    M1002 gcode_claim_action : 4\n    M400\n    M1002 set_filament_type:UNKNOWN\n    M109 S[nozzle_temperature_initial_layer]\n    M104 S250\n    M400\n    T[initial_no_support_extruder]\n    G1 X-13.5 F3000\n    M400\n    M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n    M109 S250 ;set nozzle to common flush temp\n    M106 P1 S0\n    G92 E0\n    G1 E50 F200\n    M400\n    M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n    M104 S{nozzle_temperature_range_high[initial_no_support_extruder]}\n    G92 E0\n    G1 E50 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n    M400\n    M106 P1 S178\n    G92 E0\n    G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n    G92 E0\n    G1 E-0.5 F300\n\n    G1 X0 F30000\n    G1 X-13.5 F3000\n    G1 X0 F30000 ;wipe and shake\n    G1 X-13.5 F3000\n    G1 X0 F12000 ;wipe and shake\n    G1 X0 F30000\n    G1 X-13.5 F3000\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n    G39.2 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X50 Y175 F20000 ; find a soft place to home\nM104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80}\n\nG1 X90 Y-1 Z5 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A5 B55 C85 H15 K0 M20 O2\n;M970.3 Q0 A7 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n;M106 S255\nG29.2 S0 ; turn off ABL\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\n\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X32 Y185 F30000.1 ;Brush material\nG1 Z0.6 F30000.1\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\n\nG90\nM83\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\n\n\nM221 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed  ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n    M1002 gcode_claim_action : 1\n    G29 A\n    M400\n    M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ;    ===turn on  filament runout detection===\nM400 P10\n\nG39.2 S1 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n    M1002 gcode_claim_action : 8\n    G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n    M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n    M106 P1 S178\n    M400 S7\n    G1 X0 F18000\n    G1 X-13.5 F3000\n    G1 X0 F18000 ;wipe and shake\n    G1 X-13.5 F3000\n    G1 X0 F12000 ;wipe and shake\n    G1 X-13.5 F3000\n    M400\n    M106 P1 S0\n\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n        M106 P1 S178\n        M400 S7\n        G1 X0 F18000\n        G1 X-13.5 F3000\n        G1 X0 F18000 ;wipe and shake\n        G1 X-13.5 F3000\n        G1 X0 F12000 ;wipe and shake\n        M400\n        M106 P1 S0\n    M623\nM623 ; end of \"draw extrinsic para cali paint\"\n\nG90\nM83\nG0 X70 Y-0.5 F30000\nG0 X70 Y-0.5 Z0.2 F18000 ;Move to start position\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X110 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y-1 E.021 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X70 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 Y-1.5 E.021 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X110 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 Y-2 E.021 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X70 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\n",
+    "machine_end_gcode": ";===== date: 20230907 =====================\n;turn off nozzle clog detect\nG39.2 S0\n\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 F12000 ; move to safe pos \n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z180 F600\n    G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish  sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish  sound=========\nM400 S1\nM18\n",
+    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X0 F18000\n{endif}\nM623\n\n{if layer_num == 2}\n  M400\n  G90\n  M83\n  M204 S5000\n  G0 Z2 F4000\n  G0 X-6 Y170 F20000\n  M400 P200\n  G39 S1\n  G0 Z2 F4000\n  G0 X90 Y90 F30000\n{endif}\n\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n",
+    "change_filament_gcode": ";===== machine: A1 mini =========================\n;===== date: 20230825 =======================\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\n;{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n;{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[nozzle_temperature_range_high]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\n; FLUSH_START\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab N1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json
similarity index 74%
rename from resources/profiles/BBL/machine/Bambu Lab N1 0.6 nozzle.json
rename to resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json
index 289d3dcc7..3ef6460dc 100644
--- a/resources/profiles/BBL/machine/Bambu Lab N1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json	
@@ -1,16 +1,16 @@
 {
     "type": "machine",
-    "setting_id": "GM022",
-    "name": "Bambu Lab N1 0.6 nozzle",
+    "name": "Bambu Lab A1 mini 0.6 nozzle",
+    "inherits": "Bambu Lab A1 mini 0.4 nozzle",
     "from": "system",
+    "setting_id": "GM022",
     "instantiation": "true",
-    "inherits": "Bambu Lab N1 0.4 nozzle",
     "nozzle_diameter": [
         "0.6"
     ],
-    "printer_model": "Bambu Lab N1",
+    "printer_model": "Bambu Lab A1 mini",
     "printer_variant": "0.6",
-    "default_print_profile": "0.30mm Standard @BBL N1 0.6 nozzle",
+    "default_print_profile": "0.30mm Standard @BBL A1M 0.6 nozzle",
     "max_layer_height": [
         "0.42"
     ],
diff --git a/resources/profiles/BBL/machine/Bambu Lab N1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json
similarity index 74%
rename from resources/profiles/BBL/machine/Bambu Lab N1 0.8 nozzle.json
rename to resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json
index 2daa0445f..82fcdb814 100644
--- a/resources/profiles/BBL/machine/Bambu Lab N1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json	
@@ -1,16 +1,16 @@
 {
     "type": "machine",
-    "setting_id": "GM023",
-    "name": "Bambu Lab N1 0.8 nozzle",
+    "name": "Bambu Lab A1 mini 0.8 nozzle",
+    "inherits": "Bambu Lab A1 mini 0.4 nozzle",
     "from": "system",
+    "setting_id": "GM023",
     "instantiation": "true",
-    "inherits": "Bambu Lab N1 0.4 nozzle",
     "nozzle_diameter": [
         "0.8"
     ],
-    "printer_model": "Bambu Lab N1",
+    "printer_model": "Bambu Lab A1 mini",
     "printer_variant": "0.8",
-    "default_print_profile": "0.40mm Standard @BBL N1 0.8 nozzle",
+    "default_print_profile": "0.40mm Standard @BBL A1M 0.8 nozzle",
     "max_layer_height": [
         "0.56"
     ],
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json
new file mode 100644
index 000000000..c3304a44d
--- /dev/null
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json	
@@ -0,0 +1,13 @@
+{
+    "type": "machine_model",
+    "name": "Bambu Lab A1 mini",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "model_id": "N1",
+    "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
+    "machine_tech": "FFF",
+    "family": "BBL-3DP",
+    "bed_model": "bbl-3dp-A1M.stl",
+    "bed_texture": "bbl-3dp-logo.svg",
+    "hotend_model": "bbl-3dp-hotend.stl",
+    "default_materials": "Generic PLA @BBL A1M;Generic PLA Silk @BBL A1M;Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu ABS @BBL P1P;Bambu PC @BBL P1P;Bambu Support W @BBL A1M;Bambu TPU 95A @BBL P1P;PolyTerra PLA @BBL A1M;PolyLite PLA @BBL A1M;"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab N1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab N1 0.4 nozzle.json
deleted file mode 100644
index b27db018f..000000000
--- a/resources/profiles/BBL/machine/Bambu Lab N1 0.4 nozzle.json	
+++ /dev/null
@@ -1,68 +0,0 @@
-{
-    "type": "machine",
-    "setting_id": "GM020",
-    "name": "Bambu Lab N1 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
-    "inherits": "fdm_bbl_3dp_001_common",
-    "nozzle_diameter": [
-        "0.4"
-    ],
-    "printer_model": "Bambu Lab N1",
-    "printer_variant": "0.4",
-    "auxiliary_fan": "0",
-    "bed_exclude_area": [],
-    "change_filament_gcode": ";===== machine: N1 =========================\n;===== date: 20230806 =======================\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\n;{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n;{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\nG1 Y160 F6000\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM109 S[nozzle_temperature_range_high]\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S255\nM400 S3\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S255\nM400 S3\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S255\nM400 S3\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E5 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S4\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nG1 X-13.5 F3000\nG1 X0.0 F18000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n",
-    "default_filament_profile": [
-        "Bambu PLA Basic @BBL X1"
-    ],
-    "default_print_profile": "0.20mm Standard @BBL N1",
-    "extruder_clearance_height_to_rod": "25",
-    "extruder_clearance_max_radius": "73",
-    "extruder_clearance_radius": "73",
-    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X0 F18000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
-    "machine_end_gcode": ";===== date: 20230814 =====================\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 F12000 ; move to safe pos \n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z180 F600\n    G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish  sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish  sound=========\n\nM17 X0.7 Y0.9 Z0.4 ; lower motor current to 45% power\n",
-    "machine_load_filament_time": "9",
-    "machine_max_acceleration_extruding": [
-        "15000",
-        "15000"
-    ],
-    "machine_max_acceleration_x": [
-        "6000",
-        "6000"
-    ],
-    "machine_max_acceleration_y": [
-        "6000",
-        "6000"
-    ],
-    "machine_max_acceleration_z": [
-        "1500",
-        "1000"
-    ],
-    "machine_max_jerk_e": [
-        "3",
-        "3"
-    ],
-    "machine_max_speed_z": [
-        "30",
-        "30"
-    ],
-    "machine_start_gcode": ";===== machine: N1 =========================\n;===== date: 20230814 =====================\n\nM104 S140\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n\n;=====avoid end stop =================\nG91\nG380 S2 Z15 F1200\nG380 S2 Z-10 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\n;M221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;===== heat hotend to reduce power ==========\nM109 S140\n;===== heatbed preheat ====================\nM400\nM18 ; turn off motor before heat the bed\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM17 ; after bed heated , turn on motor\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nG28 X\n\nM221 X0 Y0 Z0 ;turn off soft endstop\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    M400\n    T[initial_no_support_extruder]\n    G1 X-13.5 F3000\n    M400\n\n    M620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n    M109 S250 ;set nozzle to common flush temp\n    M106 P1 S0\n    G92 E0\n    G1 E50 F200\n    M400\n    M104 S[nozzle_temperature_initial_layer]\n    G92 E0\n    G1 E50 F200\n    M400\n    M106 P1 S255\n    G92 E0\n    G1 E5 F300\n\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n    G92 E0\n    G1 E-0.5 F300\n\n    G1 X0 F30000\n    G1 X-13.5 F3000\n    G1 X0 F30000 ;wipe and shake\n    G1 X-13.5 F3000\n    G1 X0 F12000 ;wipe and shake\n\nM621 S[initial_no_support_extruder]A\n\nM412 S1 ;    ===turn on  detection===\nM620.3 W1; === turn on filament tangle detection===\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n;M106 S255\n\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-80}\n\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X32 Y185 F30000.1 ;Brush material\nG1 Z0.6 F30000.1\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\n\nG90\nM83\n\nM221 R; pop softend status\n\nM400\nG1 Z10 F30000\nG1 F30000\nG1 X90 Y90\nG29.2 S1 ; turn on ABL\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n    M1002 gcode_claim_action : 1\n    G29 A\n    M400\n    M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_tool]==\"PLA\"}\n    {if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]-60} ; set extrude temp earlier, to reduce wait time\n;===== mech mode fast check============================\nG1 X90 Y-1 Z5 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A5 B55 C85 H15 K0 M20 O2\n;M970.3 Q0 A7 K0\nM974 Q0 S2 P0\n\nM104 S{nozzle_temperature[initial_extruder]}\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nM109 S{nozzle_temperature[initial_extruder]}\n\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n    G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n    M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n\n    M106 P1 S255\n    M400 S5\n    G1 X0 F18000\n    G1 X-13.5 F3000\n    G1 X0 F18000 ;wipe and shake\n    G1 X-13.5 F3000\n    G1 X0 F12000 ;wipe and shake\n    G1 X-13.5 F3000\n    M400\n    M106 P1 S0\n\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M983 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\n\t    M106 P1 S255\n        M400 S5\n        G1 X0 F18000\n        G1 X-13.5 F3000\n        G1 X0 F18000 ;wipe and shake\n        G1 X-13.5 F3000\n        G1 X0 F12000 ;wipe and shake\n        M400\n        M106 P1 S0\n    M623\nM623 ; end of \"draw extrinsic para cali paint\"\n\nG90\nM83\nG0 X70 Y-0.5 F30000\nG0 X70 Y-0.5 Z0.2 F18000 ;Move to start position\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X110 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y-1 E.021 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X70 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 Y-1.5 E.021 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X110 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 Y-2 E.021 F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X100 E.42 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X90 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X80 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X70 E.42  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM221 X0 Y0 Z0 ;turn off soft endstop\n",
-    "machine_unload_filament_time": "13",
-    "nozzle_type": "stainless_steel",
-    "nozzle_volume": "117",
-    "printable_area": [
-        "0x0",
-        "180x0",
-        "180x180",
-        "0x180"
-    ],
-    "printable_height": "180",
-    "scan_first_layer": "0",
-    "upward_compatible_machine": [
-        "Bambu Lab P1S 0.4 nozzle",
-        "Bambu Lab P1P 0.4 nozzle",
-        "Bambu Lab X1 0.4 nozzle",
-        "Bambu Lab X1 Carbon 0.4 nozzle"
-    ]
-}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab N1.json b/resources/profiles/BBL/machine/Bambu Lab N1.json
deleted file mode 100644
index 2366f03cb..000000000
--- a/resources/profiles/BBL/machine/Bambu Lab N1.json	
+++ /dev/null
@@ -1,13 +0,0 @@
-{
-  "type": "machine_model",
-  "name": "Bambu Lab N1",
-  "model_id": "N1",
-  "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
-  "nozzle_diameter": "0.4;0.2;0.6;0.8",
-  "machine_tech": "FFF",
-  "family": "BBL-3DP",
-  "bed_model": "bbl-3dp-N1.stl",
-  "bed_texture": "bbl-3dp-logo.svg",
-  "hotend_model": "bbl-3dp-hotend.stl",
-  "default_materials": "Generic PLA @BBL P1P;Generic PLA Silk @BBL P1P;Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu ABS @BBL P1P;Bambu PC @BBL P1P;Bambu Support W @BBL P1P;Bambu TPU 95A @BBL P1P;PolyTerra PLA @BBL P1P;PolyLite PLA @BBL P1P;"
-}
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json
index 98fc3378f..31aa9e7c8 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM010",
     "name": "Bambu Lab P1P 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab P1P 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM010",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.2"
     ],
@@ -14,7 +14,6 @@
         "Bambu PLA Basic @BBL X1C 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @BBL P1P 0.2 nozzle",
-    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "max_layer_height": [
         "0.14"
     ],
@@ -28,5 +27,6 @@
         "Bambu Lab P1S 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
         "Bambu Lab X1 Carbon 0.2 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
index 2aabc6ccc..246bc2ded 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM013",
     "name": "Bambu Lab P1P 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_bbl_3dp_001_common",
+    "from": "system",
+    "setting_id": "GM013",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.4"
     ],
@@ -21,18 +21,23 @@
         "Bambu PLA Basic @BBL X1"
     ],
     "default_print_profile": "0.20mm Standard @BBL P1P",
+    "extruder_clearance_max_radius": "56",
     "extruder_offset": [
         "0x2"
     ],
-    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
     "machine_load_filament_time": "29",
-    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "machine_unload_filament_time": "28",
     "nozzle_type": "stainless_steel",
     "scan_first_layer": "0",
+    "z_hop": [
+        "0.4"
+    ],
+    "printer_structure": "corexy",
     "upward_compatible_machine": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.4 nozzle"
-    ]
-}
+    ],
+    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json
index 36fb000c3..e2e35ce50 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM011",
     "name": "Bambu Lab P1P 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab P1P 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM011",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.6"
     ],
@@ -14,13 +14,15 @@
         "Bambu PLA Basic @BBL X1"
     ],
     "default_print_profile": "0.30mm Standard @BBL P1P 0.6 nozzle",
-    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "max_layer_height": [
         "0.42"
     ],
     "min_layer_height": [
         "0.12"
     ],
+    "z_hop": [
+        "0.4"
+    ],
     "nozzle_type": "hardened_steel",
     "retraction_length": [
         "1.4"
@@ -32,5 +34,6 @@
         "Bambu Lab P1S 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json
index aa7fe6229..04375fdf7 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM012",
     "name": "Bambu Lab P1P 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab P1P 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM012",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.8"
     ],
@@ -14,7 +14,6 @@
         "Bambu PLA Basic @BBL X1"
     ],
     "default_print_profile": "0.40mm Standard @BBL P1P 0.8 nozzle",
-    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "max_layer_height": [
         "0.56"
     ],
@@ -25,6 +24,9 @@
     "retract_length_toolchange": [
         "3"
     ],
+    "z_hop": [
+        "0.4"
+    ],
     "retraction_length": [
         "3"
     ],
@@ -32,5 +34,6 @@
         "Bambu Lab P1S 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P.json b/resources/profiles/BBL/machine/Bambu Lab P1P.json
index c48372c5d..811b33eab 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P.json	
@@ -1,13 +1,13 @@
 {
     "type": "machine_model",
     "name": "Bambu Lab P1P",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
     "model_id": "C11",
     "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
-    "nozzle_diameter": "0.4;0.2;0.6;0.8",
     "machine_tech": "FFF",
     "family": "BBL-3DP",
     "bed_model": "bbl-3dp-X1.stl",
     "bed_texture": "bbl-3dp-logo.svg",
     "hotend_model": "bbl-3dp-hotend.stl",
     "default_materials": "Generic PLA @BBL P1P;Generic PLA Silk @BBL P1P;Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu ABS @BBL P1P;Bambu PC @BBL P1P;Bambu Support W @BBL P1P;Bambu TPU 95A @BBL P1P;PolyTerra PLA @BBL P1P;PolyLite PLA @BBL P1P;"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json
index fa0d61c25..2ef87a37a 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM015",
     "name": "Bambu Lab P1S 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab P1S 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM015",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.2"
     ],
@@ -14,7 +14,6 @@
         "Bambu PLA Basic @BBL X1C 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @BBL P1P 0.2 nozzle",
-    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "max_layer_height": [
         "0.14"
     ],
@@ -28,5 +27,6 @@
         "Bambu Lab P1P 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
         "Bambu Lab X1 Carbon 0.2 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json
index bbb73214f..b5f619758 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM014",
     "name": "Bambu Lab P1S 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_bbl_3dp_001_common",
+    "from": "system",
+    "setting_id": "GM014",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.4"
     ],
@@ -16,19 +16,27 @@
         "18x28",
         "0x28"
     ],
+    "default_filament_profile": [
+        "Bambu PLA Basic @BBL X1C"
+    ],
     "default_print_profile": "0.20mm Standard @BBL X1C",
+    "extruder_clearance_max_radius": "56",
     "extruder_offset": [
         "0x2"
     ],
-    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
     "machine_load_filament_time": "29",
-    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "machine_unload_filament_time": "28",
     "nozzle_type": "stainless_steel",
     "scan_first_layer": "0",
+    "z_hop": [
+        "0.4"
+    ],
+    "printer_structure": "corexy",
     "upward_compatible_machine": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.4 nozzle"
-    ]
-}
+    ],
+    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json
index 0394c0af1..dbae519da 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json	
@@ -1,17 +1,19 @@
 {
     "type": "machine",
-    "setting_id": "GM016",
     "name": "Bambu Lab P1S 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab P1S 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM016",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.6"
     ],
     "printer_model": "Bambu Lab P1S",
     "printer_variant": "0.6",
+    "z_hop": [
+        "0.4"
+    ],
     "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle",
-    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "max_layer_height": [
         "0.42"
     ],
@@ -29,5 +31,6 @@
         "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json
index 76b6ba5e2..8c48198d3 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json	
@@ -1,20 +1,22 @@
 {
     "type": "machine",
-    "setting_id": "GM017",
     "name": "Bambu Lab P1S 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab P1S 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM017",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.8"
     ],
     "printer_model": "Bambu Lab P1S",
     "printer_variant": "0.8",
+    "z_hop": [
+        "0.4"
+    ],
     "default_filament_profile": [
         "Bambu PLA Basic @BBL X1"
     ],
     "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle",
-    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "max_layer_height": [
         "0.56"
     ],
@@ -32,5 +34,6 @@
         "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab X1 0.8 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle"
-    ]
-}
+    ],
+    "machine_start_gcode": ";===== machine: P1S ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S.json b/resources/profiles/BBL/machine/Bambu Lab P1S.json
index 340e1ec50..3fcc9857a 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S.json	
@@ -1,14 +1,13 @@
 {
-  "type": "machine_model",
-  "name": "Bambu Lab P1S",
-  "model_id": "C12",
-  "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
-  "nozzle_diameter": "0.4;0.2;0.6;0.8",
-  "machine_tech": "FFF",
-  "family": "BBL-3DP",
-  "bed_model": "bbl-3dp-X1.stl",
-  "bed_texture": "bbl-3dp-logo.svg",
-  "hotend_model": "bbl-3dp-hotend.stl",
-  "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1;Bambu TPU 95A @BBL X1;PolyTerra PLA @BBL X1;PolyLite PLA @BBL X1;"
-}
-
+    "type": "machine_model",
+    "name": "Bambu Lab P1S",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "model_id": "C12",
+    "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
+    "machine_tech": "FFF",
+    "family": "BBL-3DP",
+    "bed_model": "bbl-3dp-X1.stl",
+    "bed_texture": "bbl-3dp-logo.svg",
+    "hotend_model": "bbl-3dp-hotend.stl",
+    "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1;Bambu TPU 95A @BBL X1;PolyTerra PLA @BBL X1;PolyLite PLA @BBL X1;"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json
index b1c110684..5c0352f9b 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM008",
     "name": "Bambu Lab X1 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab X1 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM008",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.2"
     ],
@@ -14,7 +14,6 @@
         "Bambu PLA Basic @BBL X1C 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "max_layer_height": [
         "0.14"
     ],
@@ -25,8 +24,9 @@
         "0.4"
     ],
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.2 nozzle",
         "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab P1P 0.2 nozzle",
         "Bambu Lab X1 Carbon 0.2 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
index b0ed30305..233fb1650 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM003",
     "name": "Bambu Lab X1 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_bbl_3dp_001_common",
+    "from": "system",
+    "setting_id": "GM003",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.4"
     ],
@@ -25,13 +25,17 @@
         "0x2"
     ],
     "machine_load_filament_time": "29",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "machine_unload_filament_time": "28",
     "nozzle_type": "stainless_steel",
     "scan_first_layer": "1",
+    "z_hop": [
+        "0.4"
+    ],
+    "printer_structure": "corexy",
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.4 nozzle"
-    ]
-}
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
index 4878a39d8..b6e49250c 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json	
@@ -1,17 +1,19 @@
 {
     "type": "machine",
-    "setting_id": "GM006",
     "name": "Bambu Lab X1 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab X1 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM006",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.6"
     ],
     "printer_model": "Bambu Lab X1",
     "printer_variant": "0.6",
+    "z_hop": [
+        "0.4"
+    ],
     "default_print_profile": "0.30mm Standard @BBL X1 0.6 nozzle",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "max_layer_height": [
         "0.42"
     ],
@@ -26,8 +28,9 @@
         "3"
     ],
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
index b8f682970..6a3b52e57 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json	
@@ -1,17 +1,19 @@
 {
     "type": "machine",
-    "setting_id": "GM007",
     "name": "Bambu Lab X1 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab X1 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM007",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.8"
     ],
     "printer_model": "Bambu Lab X1",
     "printer_variant": "0.8",
+    "z_hop": [
+        "0.4"
+    ],
     "default_print_profile": "0.40mm Standard @BBL X1 0.8 nozzle",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "max_layer_height": [
         "0.56"
     ],
@@ -26,8 +28,9 @@
         "3"
     ],
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
index 698b1e930..84b682ce5 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM002",
     "name": "Bambu Lab X1 Carbon 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab X1 Carbon 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM002",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.2"
     ],
@@ -14,7 +14,6 @@
         "Bambu PLA Basic @BBL X1C 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "max_layer_height": [
         "0.14"
     ],
@@ -26,8 +25,9 @@
         "0.4"
     ],
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.2 nozzle",
         "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab P1P 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle"
-    ]
-}
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
index 1af20fb51..8139efe73 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json	
@@ -1,10 +1,10 @@
 {
     "type": "machine",
-    "setting_id": "GM001",
     "name": "Bambu Lab X1 Carbon 0.4 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_bbl_3dp_001_common",
+    "from": "system",
+    "setting_id": "GM001",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.4"
     ],
@@ -16,17 +16,24 @@
         "18x28",
         "0x28"
     ],
+    "default_filament_profile": [
+        "Bambu PLA Basic @BBL X1C"
+    ],
     "default_print_profile": "0.20mm Standard @BBL X1C",
     "extruder_offset": [
         "0x2"
     ],
     "machine_load_filament_time": "29",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "machine_unload_filament_time": "28",
     "scan_first_layer": "1",
+    "z_hop": [
+        "0.4"
+    ],
+    "printer_structure": "corexy",
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle"
-    ]
-}
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json
index 31db6f05c..1aa8c9466 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json	
@@ -1,17 +1,19 @@
 {
     "type": "machine",
-    "setting_id": "GM005",
     "name": "Bambu Lab X1 Carbon 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab X1 Carbon 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM005",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.6"
     ],
     "printer_model": "Bambu Lab X1 Carbon",
     "printer_variant": "0.6",
+    "z_hop": [
+        "0.4"
+    ],
     "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "max_layer_height": [
         "0.42"
     ],
@@ -25,8 +27,9 @@
         "3"
     ],
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json
index b707ccd10..ac6d31e35 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json	
@@ -1,20 +1,22 @@
 {
     "type": "machine",
-    "setting_id": "GM004",
     "name": "Bambu Lab X1 Carbon 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "Bambu Lab X1 Carbon 0.4 nozzle",
+    "from": "system",
+    "setting_id": "GM004",
+    "instantiation": "true",
     "nozzle_diameter": [
         "0.8"
     ],
     "printer_model": "Bambu Lab X1 Carbon",
     "printer_variant": "0.8",
+    "z_hop": [
+        "0.4"
+    ],
     "default_filament_profile": [
         "Bambu PLA Basic @BBL X1C 0.8 nozzle"
     ],
     "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle",
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
     "max_layer_height": [
         "0.56"
     ],
@@ -28,8 +30,9 @@
         "3"
     ],
     "upward_compatible_machine": [
-        "Bambu Lab P1P 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle"
-    ]
+    ],
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json
index d07b2f8e6..f86d5e86d 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json	
@@ -1,13 +1,13 @@
 {
     "type": "machine_model",
     "name": "Bambu Lab X1 Carbon",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
     "model_id": "BL-P001",
     "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json",
-    "nozzle_diameter": "0.4;0.2;0.6;0.8",
     "machine_tech": "FFF",
     "family": "BBL-3DP",
     "bed_model": "bbl-3dp-X1.stl",
     "bed_texture": "bbl-3dp-logo.svg",
     "hotend_model": "bbl-3dp-hotend.stl",
     "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1C;Bambu TPU 95A @BBL X1C;PolyTerra PLA @BBL X1C;PolyLite PLA @BBL X1C;"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1.json b/resources/profiles/BBL/machine/Bambu Lab X1.json
index bb36dcb72..26e913529 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1.json	
@@ -1,13 +1,13 @@
 {
     "type": "machine_model",
     "name": "Bambu Lab X1",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
     "model_id": "BL-P002",
     "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
-    "nozzle_diameter": "0.4;0.2;0.6;0.8",
     "machine_tech": "FFF",
     "family": "BBL-3DP",
     "bed_model": "bbl-3dp-X1.stl",
     "bed_texture": "bbl-3dp-logo.svg",
     "hotend_model": "bbl-3dp-hotend.stl",
     "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1;Bambu TPU 95A @BBL X1;PolyTerra PLA @BBL X1;PolyLite PLA @BBL X1;"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json b/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json
index 7a4f799ec..a513a28b5 100644
--- a/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json
+++ b/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json
@@ -1,8 +1,13 @@
 {
     "type": "machine",
     "name": "fdm_bbl_3dp_001_common",
+    "inherits": "fdm_machine_common",
     "from": "system",
     "instantiation": "false",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
     "printable_area": [
         "0x0",
         "256x0",
@@ -27,11 +32,6 @@
     "extruder_colour": [
         "#018001"
     ],
-    "extruder_offset": [
-        "0x0"
-    ],
-    "gcode_flavor": "marlin",
-    "inherits": "fdm_machine_common",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -100,33 +100,16 @@
         "0",
         "0"
     ],
-    "max_layer_height": [
-        "0.28"
-    ],
-    "min_layer_height": [
-        "0.08"
-    ],
-    "printable_height": "250",
     "extruder_clearance_radius": "57",
     "extruder_clearance_max_radius": "68",
-    "extruder_clearance_height_to_rod": "36",
     "extruder_clearance_height_to_lid": "90",
     "nozzle_volume": "107",
-    "nozzle_diameter": [
-        "0.4"
-    ],
-    "printer_settings_id": "",
-    "printer_technology": "FFF",
-    "printer_variant": "0.4",
     "retraction_minimum_travel": [
         "1"
     ],
     "retract_before_wipe": [
         "0%"
     ],
-    "retract_when_changing_layer": [
-        "1"
-    ],
     "retraction_length": [
         "0.8"
     ],
@@ -136,12 +119,6 @@
     "z_hop": [
         "0.4"
     ],
-    "retract_restart_extra": [
-        "0"
-    ],
-    "retract_restart_extra_toolchange": [
-        "0"
-    ],
     "retraction_speed": [
         "30"
     ],
@@ -149,16 +126,12 @@
         "30"
     ],
     "z_hop_types": [
-      "Auto Lift"
+        "Auto Lift"
     ],
     "nozzle_type": "hardened_steel",
-    "silent_mode": "0",
     "single_extruder_multi_material": "1",
-    "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM109 S[nozzle_temperature_range_high]\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\nG1 X80 F15000\nG1 X60 F15000\nG1 X80 F15000\nG1 X60 F15000; shake to put down garbage\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A",
-    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
     "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X128 Y250 F3600\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n",
-    "machine_pause_gcode": "M400 U1",
-    "wipe": [
-        "1"
-    ]
-}
+    "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
+    "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM109 S[nozzle_temperature_range_high]\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\nG1 X80 F15000\nG1 X60 F15000\nG1 X80 F15000\nG1 X60 F15000; shake to put down garbage\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A",
+    "machine_pause_gcode": "M400 U1"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json
index 032684e2f..c161bc9a8 100644
--- a/resources/profiles/BBL/machine/fdm_machine_common.json
+++ b/resources/profiles/BBL/machine/fdm_machine_common.json
@@ -3,6 +3,10 @@
     "name": "fdm_machine_common",
     "from": "system",
     "instantiation": "false",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
     "support_chamber_temp_control": "0",
     "printer_technology": "FFF",
     "deretraction_speed": [
@@ -74,11 +78,7 @@
     "extruder_clearance_radius": "65",
     "extruder_clearance_height_to_rod": "36",
     "extruder_clearance_height_to_lid": "140",
-    "nozzle_diameter": [
-        "0.4"
-    ],
     "printer_settings_id": "",
-    "printer_variant": "0.4",
     "retraction_minimum_travel": [
         "2"
     ],
@@ -107,13 +107,14 @@
         "60"
     ],
     "single_extruder_multi_material": "0",
-    "change_filament_gcode": "",
+    "support_air_filtration": "0",
     "wipe": [
         "1"
     ],
-    "default_filament_profile":[],
+    "default_filament_profile": [],
     "default_print_profile": "0.16mm Optimal @BBL X1C",
     "upward_compatible_machine": [],
     "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
-    "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
-}
+    "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
+    "change_filament_gcode": ""
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json
index afcd48090..f2af60320 100644
--- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP024",
-  "name": "0.06mm Standard @BBL X1C 0.2 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.06_nozzle_0.2",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle",
-    "Bambu Lab P1S 0.2 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.06mm Standard @BBL X1C 0.2 nozzle",
+    "inherits": "fdm_process_bbl_0.06_nozzle_0.2",
+    "from": "system",
+    "setting_id": "GP024",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json
new file mode 100644
index 000000000..d81d7a50d
--- /dev/null
+++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.08mm Extra Fine @BBL A1M",
+    "inherits": "fdm_process_bbl_0.08",
+    "from": "system",
+    "setting_id": "GP049",
+    "instantiation": "true",
+    "default_acceleration": "6000",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json
index be1394c5b..bc9f93e28 100644
--- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json	
@@ -1,12 +1,11 @@
 {
     "type": "process",
-    "setting_id": "GP018",
     "name": "0.08mm Extra Fine @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.08",
+    "from": "system",
+    "setting_id": "GP018",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab P1P 0.4 nozzle",
-      "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json
index 10981794e..1742e8dc4 100644
--- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json	
@@ -1,13 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP001",
     "name": "0.08mm Extra Fine @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.08",
+    "from": "system",
+    "setting_id": "GP001",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json
index 42cfda4fd..9c87571fe 100644
--- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP025",
-  "name": "0.08mm Standard @BBL X1C 0.2 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.08_nozzle_0.2",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle",
-    "Bambu Lab P1S 0.2 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.08mm Standard @BBL X1C 0.2 nozzle",
+    "inherits": "fdm_process_bbl_0.08_nozzle_0.2",
+    "from": "system",
+    "setting_id": "GP025",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL N1 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json
similarity index 63%
rename from resources/profiles/BBL/process/0.10mm Standard @BBL N1 0.2 nozzle.json
rename to resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json
index 52f287dba..53895d550 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL N1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json	
@@ -1,12 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP039",
-    "name": "0.10mm Standard @BBL N1 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
+    "name": "0.10mm Standard @BBL A1M 0.2 nozzle",
     "inherits": "0.10mm Standard @BBL P1P 0.2 nozzle",
+    "from": "system",
+    "setting_id": "GP039",
+    "instantiation": "true",
+    "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [
-        "Bambu Lab N1 0.2 nozzle"
+        "Bambu Lab A1 mini 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json
index 2635ae980..0b50342c1 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
@@ -1,12 +1,12 @@
 {
-  "type": "process",
-  "setting_id": "GP014",
-  "name": "0.10mm Standard @BBL P1P 0.2 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.10_nozzle_0.2",
-  "elefant_foot_compensation": "0.15",
-  "compatible_printers": [
-    "Bambu Lab P1P 0.2 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.10mm Standard @BBL P1P 0.2 nozzle",
+    "inherits": "fdm_process_bbl_0.10_nozzle_0.2",
+    "from": "system",
+    "setting_id": "GP014",
+    "instantiation": "true",
+    "elefant_foot_compensation": "0.15",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json
index 86c5ccc34..d699cb76c 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json	
@@ -1,13 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP007",
     "name": "0.10mm Standard @BBL X1C 0.2 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.10_nozzle_0.2",
+    "from": "system",
+    "setting_id": "GP007",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.2 nozzle",
-      "Bambu Lab X1 0.2 nozzle",
-      "Bambu Lab P1S 0.2 nozzle"
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json
new file mode 100644
index 000000000..b4926f177
--- /dev/null
+++ b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.12mm Fine @BBL A1M",
+    "inherits": "fdm_process_bbl_0.12",
+    "from": "system",
+    "setting_id": "GP044",
+    "instantiation": "true",
+    "default_acceleration": "6000",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json
index 8c0255963..03afc8bee 100644
--- a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json	
@@ -1,12 +1,11 @@
 {
     "type": "process",
-    "setting_id": "GP019",
     "name": "0.12mm Fine @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.12",
+    "from": "system",
+    "setting_id": "GP019",
+    "instantiation": "true",
     "compatible_printers": [
-        "Bambu Lab P1P 0.4 nozzle",
-        "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json
index a1e2466f2..ecfd6a45e 100644
--- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json	
@@ -1,13 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP002",
     "name": "0.12mm Fine @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.12",
+    "from": "system",
+    "setting_id": "GP002",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json
index 255f40795..63e4db5ee 100644
--- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP026",
-  "name": "0.12mm Standard @BBL X1C 0.2 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits":  "fdm_process_bbl_0.12_nozzle_0.2",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle",
-    "Bambu Lab P1S 0.2 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.12mm Standard @BBL X1C 0.2 nozzle",
+    "inherits": "fdm_process_bbl_0.12_nozzle_0.2",
+    "from": "system",
+    "setting_id": "GP026",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json
index 38ba642cd..cc737b50b 100644
--- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP027",
-  "name": "0.14mm Standard @BBL X1C 0.2 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits":  "fdm_process_bbl_0.14_nozzle_0.2",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle",
-    "Bambu Lab P1S 0.2 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.14mm Standard @BBL X1C 0.2 nozzle",
+    "inherits": "fdm_process_bbl_0.14_nozzle_0.2",
+    "from": "system",
+    "setting_id": "GP027",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json
new file mode 100644
index 000000000..158209f28
--- /dev/null
+++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.16mm Optimal @BBL A1M",
+    "inherits": "fdm_process_bbl_0.16",
+    "from": "system",
+    "setting_id": "GP045",
+    "instantiation": "true",
+    "default_acceleration": "6000",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json
index b397434e7..1e0462da7 100644
--- a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json	
@@ -1,12 +1,11 @@
 {
     "type": "process",
-    "setting_id": "GP020",
     "name": "0.16mm Optimal @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.16",
+    "from": "system",
+    "setting_id": "GP020",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab P1P 0.4 nozzle",
-      "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json
index f0d484718..6f98d9b8c 100644
--- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json	
@@ -1,13 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP003",
     "name": "0.16mm Optimal @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.16",
+    "from": "system",
+    "setting_id": "GP003",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json
index 632362fee..c2ffcfa7d 100644
--- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP028",
-  "name": "0.18mm Standard @BBL X1C 0.6 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.18_nozzle_0.6",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle",
-    "Bambu Lab P1S 0.6 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.18mm Standard @BBL X1C 0.6 nozzle",
+    "inherits": "fdm_process_bbl_0.18_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP028",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json
index 2be87d861..dbe514443 100644
--- a/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.20mm Bambu Support W @BBL X1C.json	
@@ -16,6 +16,7 @@
     "enable_prime_tower": "1",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL N1.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json
similarity index 64%
rename from resources/profiles/BBL/process/0.20mm Standard @BBL N1.json
rename to resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json
index 1189a34fe..c168acda4 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL N1.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json	
@@ -1,12 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP000",
-    "name": "0.20mm Standard @BBL N1",
-    "from": "system",
-    "instantiation": "true",
+    "name": "0.20mm Standard @BBL A1M",
     "inherits": "0.20mm Standard @BBL P1P",
+    "from": "system",
+    "setting_id": "GP000",
+    "instantiation": "true",
+    "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [
-        "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab A1 mini 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json
index c6fdb3e92..1b60746ef 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json	
@@ -1,12 +1,11 @@
 {
-  "type": "process",
-  "setting_id": "GP015",
-  "name": "0.20mm Standard @BBL P1P",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.20",
-  "elefant_foot_compensation": "0.15",
-  "compatible_printers": [
-    "Bambu Lab P1P 0.4 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.20mm Standard @BBL P1P",
+    "inherits": "fdm_process_bbl_0.20",
+    "from": "system",
+    "setting_id": "GP015",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json
index 0f392355d..8ac7f03d8 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json	
@@ -1,13 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP004",
     "name": "0.20mm Standard @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.20",
+    "from": "system",
+    "setting_id": "GP004",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json
new file mode 100644
index 000000000..89187be4c
--- /dev/null
+++ b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.20mm Strength @BBL A1M",
+    "inherits": "0.20mm Strength @BBL P1P",
+    "from": "system",
+    "setting_id": "GP046",
+    "instantiation": "true",
+    "default_acceleration": "6000",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json
index 06553d56e..c38f5f711 100644
--- a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json	
@@ -1,15 +1,14 @@
 {
     "type": "process",
-    "setting_id": "GP021",
     "name": "0.20mm Strength @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.20",
+    "from": "system",
+    "setting_id": "GP021",
+    "instantiation": "true",
     "outer_wall_speed": "60",
-    "wall_loops": "6",
     "sparse_infill_density": "25%",
+    "wall_loops": "6",
     "compatible_printers": [
-      "Bambu Lab P1P 0.4 nozzle",
-      "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json
index 658db119c..06af7e79e 100644
--- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json	
@@ -1,16 +1,16 @@
 {
     "type": "process",
-    "setting_id": "GP013",
     "name": "0.20mm Strength @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.20",
+    "from": "system",
+    "setting_id": "GP013",
+    "instantiation": "true",
     "outer_wall_speed": "60",
     "wall_loops": "6",
     "sparse_infill_density": "25%",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json
new file mode 100644
index 000000000..87494e044
--- /dev/null
+++ b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.24mm Draft @BBL A1M",
+    "inherits": "fdm_process_bbl_0.24",
+    "from": "system",
+    "setting_id": "GP047",
+    "instantiation": "true",
+    "default_acceleration": "6000",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json
index 11797a492..87866d4f7 100644
--- a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json	
@@ -1,12 +1,11 @@
 {
     "type": "process",
-    "setting_id": "GP022",
     "name": "0.24mm Draft @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.24",
+    "from": "system",
+    "setting_id": "GP022",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab P1P 0.4 nozzle",
-      "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json
index a8483c1d5..204262d78 100644
--- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json	
@@ -1,13 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP005",
     "name": "0.24mm Draft @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.24",
+    "from": "system",
+    "setting_id": "GP005",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json
index c52963737..c162ab88e 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP029",
-  "name": "0.24mm Standard @BBL X1C 0.6 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.24_nozzle_0.6",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle",
-    "Bambu Lab P1S 0.6 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.24mm Standard @BBL X1C 0.6 nozzle",
+    "inherits": "fdm_process_bbl_0.24_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP029",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json
index 1bd8407ae..fa77ea78f 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP032",
-  "name": "0.24mm Standard @BBL X1C 0.8 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.24_nozzle_0.8",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle",
-    "Bambu Lab P1S 0.8 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.24mm Standard @BBL X1C 0.8 nozzle",
+    "inherits": "fdm_process_bbl_0.24_nozzle_0.8",
+    "from": "system",
+    "setting_id": "GP032",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json
new file mode 100644
index 000000000..4b1e483ed
--- /dev/null
+++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json	
@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "name": "0.28mm Extra Draft @BBL A1M",
+    "inherits": "fdm_process_bbl_0.28",
+    "from": "system",
+    "setting_id": "GP048",
+    "instantiation": "true",
+    "default_acceleration": "6000",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json
index de8bb831d..ca64d1e31 100644
--- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json	
+++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json	
@@ -1,12 +1,11 @@
 {
     "type": "process",
-    "setting_id": "GP023",
     "name": "0.28mm Extra Draft @BBL P1P",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.28",
+    "from": "system",
+    "setting_id": "GP023",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab P1P 0.4 nozzle",
-      "Bambu Lab N1 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json
index 7dca7acee..eb00aab2a 100644
--- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json	
@@ -1,13 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP006",
     "name": "0.28mm Extra Draft @BBL X1C",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.28",
+    "from": "system",
+    "setting_id": "GP006",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle",
-      "Bambu Lab P1S 0.4 nozzle"
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL N1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json
similarity index 63%
rename from resources/profiles/BBL/process/0.30mm Standard @BBL N1 0.6 nozzle.json
rename to resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json
index cc9eb2f84..960ad6d6c 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL N1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json	
@@ -1,12 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP038",
-    "name": "0.30mm Standard @BBL N1 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
+    "name": "0.30mm Standard @BBL A1M 0.6 nozzle",
     "inherits": "0.30mm Standard @BBL P1P 0.6 nozzle",
+    "from": "system",
+    "setting_id": "GP038",
+    "instantiation": "true",
+    "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [
-        "Bambu Lab N1 0.6 nozzle"
+        "Bambu Lab A1 mini 0.6 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json
index 0d2edb4f2..37b7593e8 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json	
@@ -1,12 +1,12 @@
 {
-  "type": "process",
-  "setting_id": "GP016",
-  "name": "0.30mm Standard @BBL P1P 0.6 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.30_nozzle_0.6",
-  "elefant_foot_compensation": "0.15",
-  "compatible_printers": [
-      "Bambu Lab P1P 0.6 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.30mm Standard @BBL P1P 0.6 nozzle",
+    "inherits": "fdm_process_bbl_0.30_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP016",
+    "instantiation": "true",
+    "elefant_foot_compensation": "0.15",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json
index 174a8c346..d6114dfac 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json	
@@ -1,11 +1,11 @@
 {
     "type": "process",
-    "setting_id": "GP011",
     "name": "0.30mm Standard @BBL X1 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.30_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP011",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 0.6 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json
index ca96c93c7..3ce90daed 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json	
@@ -1,12 +1,12 @@
 {
     "type": "process",
-    "setting_id": "GP010",
     "name": "0.30mm Standard @BBL X1C 0.6 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.30_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP010",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.6 nozzle",
-      "Bambu Lab P1S 0.6 nozzle"
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json
index c50b7e93d..e61d98d21 100644
--- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
@@ -1,15 +1,15 @@
 {
-  "type": "process",
-  "setting_id": "GP036",
-  "name": "0.30mm Strength @BBL X1C 0.6 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.30_nozzle_0.6",
-  "wall_loops": "4",
-  "sparse_infill_density":"25%",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle",
-    "Bambu Lab P1S 0.6 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.30mm Strength @BBL X1C 0.6 nozzle",
+    "inherits": "fdm_process_bbl_0.30_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP036",
+    "instantiation": "true",
+    "wall_loops": "4",
+    "sparse_infill_density": "25%",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json
index 81d6e630f..9bc34fc8c 100644
--- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP033",
-  "name": "0.32mm Standard @BBL X1C 0.8 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.32_nozzle_0.8",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle",
-    "Bambu Lab P1S 0.8 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.32mm Standard @BBL X1C 0.8 nozzle",
+    "inherits": "fdm_process_bbl_0.32_nozzle_0.8",
+    "from": "system",
+    "setting_id": "GP033",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json
index 6e8c3d10f..4cded0e54 100644
--- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP030",
-  "name": "0.36mm Standard @BBL X1C 0.6 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.36_nozzle_0.6",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle",
-    "Bambu Lab P1S 0.6 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.36mm Standard @BBL X1C 0.6 nozzle",
+    "inherits": "fdm_process_bbl_0.36_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP030",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL N1 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json
similarity index 63%
rename from resources/profiles/BBL/process/0.40mm Standard @BBL N1 0.8 nozzle.json
rename to resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json
index c25bb1ec1..9b23f80d0 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL N1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json	
@@ -1,12 +1,13 @@
 {
     "type": "process",
-    "setting_id": "GP037",
-    "name": "0.40mm Standard @BBL N1 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
+    "name": "0.40mm Standard @BBL A1M 0.8 nozzle",
     "inherits": "0.40mm Standard @BBL P1P 0.8 nozzle",
+    "from": "system",
+    "setting_id": "GP037",
+    "instantiation": "true",
+    "default_acceleration": "6000",
     "travel_speed": "700",
     "compatible_printers": [
-        "Bambu Lab N1 0.8 nozzle"
+        "Bambu Lab A1 mini 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json
index 9f47ebfd5..547915d19 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json	
@@ -1,12 +1,12 @@
 {
-  "type": "process",
-  "setting_id": "GP017",
-  "name": "0.40mm Standard @BBL P1P 0.8 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.40_nozzle_0.8",
-  "elefant_foot_compensation": "0.15",
-  "compatible_printers": [
-      "Bambu Lab P1P 0.8 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.40mm Standard @BBL P1P 0.8 nozzle",
+    "inherits": "fdm_process_bbl_0.40_nozzle_0.8",
+    "from": "system",
+    "setting_id": "GP017",
+    "instantiation": "true",
+    "elefant_foot_compensation": "0.15",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json
index 852d9e97a..e9aa8d183 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json	
@@ -1,11 +1,11 @@
 {
     "type": "process",
-    "setting_id": "GP012",
     "name": "0.40mm Standard @BBL X1 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.40_nozzle_0.8",
+    "from": "system",
+    "setting_id": "GP012",
+    "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json
index 85ed2203d..ac53792b5 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json	
@@ -1,12 +1,12 @@
 {
     "type": "process",
-    "setting_id": "GP009",
     "name": "0.40mm Standard @BBL X1C 0.8 nozzle",
-    "from": "system",
-    "instantiation": "true",
     "inherits": "fdm_process_bbl_0.40_nozzle_0.8",
+    "from": "system",
+    "setting_id": "GP009",
+    "instantiation": "true",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.8 nozzle",
-      "Bambu Lab P1S 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json
index 59221c310..f46d7d641 100644
--- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP031",
-  "name": "0.42mm Standard @BBL X1C 0.6 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.42_nozzle_0.6",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle",
-    "Bambu Lab P1S 0.6 nozzle"
-  ]
+    "type": "process",
+    "name": "0.42mm Standard @BBL X1C 0.6 nozzle",
+    "inherits": "fdm_process_bbl_0.42_nozzle_0.6",
+    "from": "system",
+    "setting_id": "GP031",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json
index 38cd043b4..a0cf1b836 100644
--- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP034",
-  "name": "0.48mm Standard @BBL X1C 0.8 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.48_nozzle_0.8",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle",
-    "Bambu Lab P1S 0.8 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.48mm Standard @BBL X1C 0.8 nozzle",
+    "inherits": "fdm_process_bbl_0.48_nozzle_0.8",
+    "from": "system",
+    "setting_id": "GP034",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json
index 421deb5b3..45b1ef9d3 100644
--- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json	
@@ -1,13 +1,13 @@
 {
-  "type": "process",
-  "setting_id": "GP035",
-  "name": "0.56mm Standard @BBL X1C 0.8 nozzle",
-  "from": "system",
-  "instantiation": "true",
-  "inherits": "fdm_process_bbl_0.56_nozzle_0.8",
-  "compatible_printers": [
-    "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle",
-    "Bambu Lab P1S 0.8 nozzle"
-  ]
-}
+    "type": "process",
+    "name": "0.56mm Standard @BBL X1C 0.8 nozzle",
+    "inherits": "fdm_process_bbl_0.56_nozzle_0.8",
+    "from": "system",
+    "setting_id": "GP035",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
index 35257823a..c01ea5498 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
@@ -1,25 +1,25 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.06_nozzle_0.2",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.06",
-  "initial_layer_print_height": "0.1",
-  "wall_loops": "4",
-  "bottom_shell_layers": "5",
-  "top_shell_layers": "7",
-  "bridge_flow": "1",
-  "line_width": "0.22",
-  "outer_wall_line_width": "0.22",
-  "initial_layer_line_width": "0.25",
-  "sparse_infill_line_width": "0.22",
-  "inner_wall_line_width": "0.22",
-  "internal_solid_infill_line_width": "0.22",
-  "support_line_width": "0.22",
-  "top_surface_line_width": "0.22",
-  "initial_layer_speed": "40",
-  "initial_layer_infill_speed": "70",
-  "sparse_infill_speed": "100",
-  "top_surface_speed": "150"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.06_nozzle_0.2",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.06",
+    "initial_layer_print_height": "0.1",
+    "wall_loops": "4",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "bridge_flow": "1",
+    "line_width": "0.22",
+    "outer_wall_line_width": "0.22",
+    "initial_layer_line_width": "0.25",
+    "sparse_infill_line_width": "0.22",
+    "inner_wall_line_width": "0.22",
+    "internal_solid_infill_line_width": "0.22",
+    "support_line_width": "0.22",
+    "top_surface_line_width": "0.22",
+    "initial_layer_speed": "40",
+    "initial_layer_infill_speed": "70",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.08.json b/resources/profiles/BBL/process/fdm_process_bbl_0.08.json
index 0348c3342..836980d3f 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.08.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.08.json
@@ -1,9 +1,9 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.08",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.08",
     "elefant_foot_compensation": "0.15",
     "bottom_shell_layers": "7",
@@ -16,11 +16,9 @@
     "inner_wall_speed": "350",
     "sparse_infill_speed": "450",
     "internal_solid_infill_speed": "350",
-    "top_surface_speed": "200",
     "gap_infill_speed": "350",
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
     "overhang_3_4_speed": "10",
-    "overhang_4_4_speed": "10",
     "support_threshold_angle": "15"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
index 90fae2139..43a8b60f0 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
@@ -1,25 +1,25 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.08_nozzle_0.2",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.08",
-  "initial_layer_print_height": "0.1",
-  "wall_loops": "4",
-  "bottom_shell_layers": "5",
-  "top_shell_layers": "7",
-  "bridge_flow": "1",
-  "line_width": "0.22",
-  "outer_wall_line_width": "0.22",
-  "initial_layer_line_width": "0.25",
-  "sparse_infill_line_width": "0.22",
-  "inner_wall_line_width": "0.22",
-  "internal_solid_infill_line_width": "0.22",
-  "support_line_width": "0.22",
-  "top_surface_line_width": "0.22",
-  "initial_layer_speed": "40",
-  "initial_layer_infill_speed": "70",
-  "sparse_infill_speed": "100",
-  "top_surface_speed": "150"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.08_nozzle_0.2",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.08",
+    "initial_layer_print_height": "0.1",
+    "wall_loops": "4",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "bridge_flow": "1",
+    "line_width": "0.22",
+    "outer_wall_line_width": "0.22",
+    "initial_layer_line_width": "0.25",
+    "sparse_infill_line_width": "0.22",
+    "inner_wall_line_width": "0.22",
+    "internal_solid_infill_line_width": "0.22",
+    "support_line_width": "0.22",
+    "top_surface_line_width": "0.22",
+    "initial_layer_speed": "40",
+    "initial_layer_infill_speed": "70",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
index a53df8b5a..cc7d77395 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
@@ -1,9 +1,9 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.10_nozzle_0.2",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.1",
     "initial_layer_print_height": "0.1",
     "wall_loops": "4",
@@ -22,4 +22,4 @@
     "initial_layer_infill_speed": "70",
     "sparse_infill_speed": "100",
     "top_surface_speed": "150"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.12.json b/resources/profiles/BBL/process/fdm_process_bbl_0.12.json
index dcbb2f9a4..e76673b43 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.12.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.12.json
@@ -1,9 +1,9 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.12",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.12",
     "bottom_shell_layers": "5",
     "elefant_foot_compensation": "0.15",
@@ -16,11 +16,9 @@
     "inner_wall_speed": "350",
     "sparse_infill_speed": "430",
     "internal_solid_infill_speed": "350",
-    "top_surface_speed": "200",
     "gap_infill_speed": "350",
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
     "overhang_3_4_speed": "10",
-    "overhang_4_4_speed": "10",
     "support_threshold_angle": "20"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
index 8a76d4c7c..040df9f8a 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
@@ -1,25 +1,25 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.12_nozzle_0.2",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.12",
-  "initial_layer_print_height": "0.1",
-  "wall_loops": "4",
-  "bottom_shell_layers": "5",
-  "top_shell_layers": "7",
-  "bridge_flow": "1",
-  "line_width": "0.22",
-  "outer_wall_line_width": "0.22",
-  "initial_layer_line_width": "0.25",
-  "sparse_infill_line_width": "0.22",
-  "inner_wall_line_width": "0.22",
-  "internal_solid_infill_line_width": "0.22",
-  "support_line_width": "0.22",
-  "top_surface_line_width": "0.22",
-  "initial_layer_speed": "40",
-  "initial_layer_infill_speed": "70",
-  "sparse_infill_speed": "100",
-  "top_surface_speed": "150"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.12_nozzle_0.2",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.12",
+    "initial_layer_print_height": "0.1",
+    "wall_loops": "4",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "bridge_flow": "1",
+    "line_width": "0.22",
+    "outer_wall_line_width": "0.22",
+    "initial_layer_line_width": "0.25",
+    "sparse_infill_line_width": "0.22",
+    "inner_wall_line_width": "0.22",
+    "internal_solid_infill_line_width": "0.22",
+    "support_line_width": "0.22",
+    "top_surface_line_width": "0.22",
+    "initial_layer_speed": "40",
+    "initial_layer_infill_speed": "70",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
index 81bd28b30..be12c21e1 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
@@ -1,25 +1,25 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.14_nozzle_0.2",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.14",
-  "initial_layer_print_height": "0.1",
-  "wall_loops": "4",
-  "bottom_shell_layers": "5",
-  "top_shell_layers": "7",
-  "bridge_flow": "1",
-  "line_width": "0.22",
-  "outer_wall_line_width": "0.22",
-  "initial_layer_line_width": "0.25",
-  "sparse_infill_line_width": "0.22",
-  "inner_wall_line_width": "0.22",
-  "internal_solid_infill_line_width": "0.22",
-  "support_line_width": "0.22",
-  "top_surface_line_width": "0.22",
-  "initial_layer_speed": "40",
-  "initial_layer_infill_speed": "70",
-  "sparse_infill_speed": "100",
-  "top_surface_speed": "150"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.14_nozzle_0.2",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.14",
+    "initial_layer_print_height": "0.1",
+    "wall_loops": "4",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "7",
+    "bridge_flow": "1",
+    "line_width": "0.22",
+    "outer_wall_line_width": "0.22",
+    "initial_layer_line_width": "0.25",
+    "sparse_infill_line_width": "0.22",
+    "inner_wall_line_width": "0.22",
+    "internal_solid_infill_line_width": "0.22",
+    "support_line_width": "0.22",
+    "top_surface_line_width": "0.22",
+    "initial_layer_speed": "40",
+    "initial_layer_infill_speed": "70",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.16.json b/resources/profiles/BBL/process/fdm_process_bbl_0.16.json
index 14186f717..3c435f422 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.16.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.16.json
@@ -1,9 +1,9 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.16",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.16",
     "elefant_foot_compensation": "0.15",
     "bottom_shell_layers": "4",
@@ -16,11 +16,9 @@
     "inner_wall_speed": "300",
     "sparse_infill_speed": "330",
     "internal_solid_infill_speed": "300",
-    "top_surface_speed": "200",
     "gap_infill_speed": "300",
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
     "overhang_3_4_speed": "10",
-    "overhang_4_4_speed": "10",
     "support_threshold_angle": "25"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
index 1a9120fdb..3baf1fd45 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
@@ -1,34 +1,24 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.18_nozzle_0.6",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.18",
-  "initial_layer_print_height": "0.3",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.62",
-  "outer_wall_line_width": "0.62",
-  "initial_layer_line_width": "0.62",
-  "sparse_infill_line_width": "0.62",
-  "inner_wall_line_width": "0.62",
-  "internal_solid_infill_line_width": "0.62",
-  "support_line_width": "0.62",
-  "top_surface_line_width": "0.62",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "15",
-  "overhang_4_4_speed": "10"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.18_nozzle_0.6",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.18",
+    "initial_layer_print_height": "0.3",
+    "bridge_flow": "1",
+    "line_width": "0.62",
+    "outer_wall_line_width": "0.62",
+    "initial_layer_line_width": "0.62",
+    "sparse_infill_line_width": "0.62",
+    "inner_wall_line_width": "0.62",
+    "internal_solid_infill_line_width": "0.62",
+    "support_line_width": "0.62",
+    "top_surface_line_width": "0.62",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "15"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.20.json b/resources/profiles/BBL/process/fdm_process_bbl_0.20.json
index 12fe82dd1..d48f4a29a 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.20.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.20.json
@@ -1,13 +1,10 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.20",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
-    "layer_height": "0.2",
     "elefant_foot_compensation": "0.15",
-    "bottom_shell_layers": "3",
-    "top_shell_layers": "3",
     "top_shell_thickness": "0.6",
     "bridge_flow": "1",
     "initial_layer_speed": "50",
@@ -16,6 +13,5 @@
     "inner_wall_speed": "300",
     "sparse_infill_speed": "270",
     "internal_solid_infill_speed": "250",
-    "top_surface_speed": "200",
     "gap_infill_speed": "250"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24.json
index 3b83ea159..02e7595c7 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.24.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24.json
@@ -1,14 +1,12 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.24",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.24",
     "elefant_foot_compensation": "0.15",
     "top_surface_line_width": "0.45",
-    "bottom_shell_layers": "3",
-    "top_shell_layers": "3",
     "top_shell_thickness": "0.6",
     "bridge_flow": "1",
     "initial_layer_speed": "50",
@@ -17,7 +15,6 @@
     "inner_wall_speed": "230",
     "sparse_infill_speed": "230",
     "internal_solid_infill_speed": "230",
-    "top_surface_speed": "200",
     "gap_infill_speed": "230",
     "support_threshold_angle": "35"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
index aec643962..514e31759 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
@@ -1,34 +1,24 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.24_nozzle_0.6",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.24",
-  "initial_layer_print_height": "0.3",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.62",
-  "outer_wall_line_width": "0.62",
-  "initial_layer_line_width": "0.62",
-  "sparse_infill_line_width": "0.62",
-  "inner_wall_line_width": "0.62",
-  "internal_solid_infill_line_width": "0.62",
-  "support_line_width": "0.62",
-  "top_surface_line_width": "0.62",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "15",
-  "overhang_4_4_speed": "10"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.24_nozzle_0.6",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.24",
+    "initial_layer_print_height": "0.3",
+    "bridge_flow": "1",
+    "line_width": "0.62",
+    "outer_wall_line_width": "0.62",
+    "initial_layer_line_width": "0.62",
+    "sparse_infill_line_width": "0.62",
+    "inner_wall_line_width": "0.62",
+    "internal_solid_infill_line_width": "0.62",
+    "support_line_width": "0.62",
+    "top_surface_line_width": "0.62",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "15"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
index 9c1cbf202..5fedaf53d 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
@@ -1,35 +1,26 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.24_nozzle_0.8",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.24",
-  "initial_layer_print_height": "0.4",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.82",
-  "outer_wall_line_width": "0.82",
-  "initial_layer_line_width": "0.82",
-  "sparse_infill_line_width": "0.82",
-  "inner_wall_line_width": "0.82",
-  "internal_solid_infill_line_width": "0.82",
-  "support_line_width": "0.82",
-  "top_surface_line_width": "0.82",
-  "top_surface_pattern": "monotonic",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "25",
-  "overhang_4_4_speed": "5"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.24_nozzle_0.8",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.24",
+    "initial_layer_print_height": "0.4",
+    "bridge_flow": "1",
+    "line_width": "0.82",
+    "outer_wall_line_width": "0.82",
+    "initial_layer_line_width": "0.82",
+    "sparse_infill_line_width": "0.82",
+    "inner_wall_line_width": "0.82",
+    "internal_solid_infill_line_width": "0.82",
+    "support_line_width": "0.82",
+    "top_surface_line_width": "0.82",
+    "top_surface_pattern": "monotonic",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.28.json b/resources/profiles/BBL/process/fdm_process_bbl_0.28.json
index 08f80a2ef..1c70a95b9 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.28.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.28.json
@@ -1,14 +1,12 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.28",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.28",
     "elefant_foot_compensation": "0.15",
     "top_surface_line_width": "0.45",
-    "bottom_shell_layers": "3",
-    "top_shell_layers": "3",
     "top_shell_thickness": "0.6",
     "bridge_flow": "1",
     "initial_layer_speed": "50",
@@ -17,7 +15,6 @@
     "inner_wall_speed": "200",
     "sparse_infill_speed": "200",
     "internal_solid_infill_speed": "200",
-    "top_surface_speed": "200",
     "gap_infill_speed": "200",
     "support_threshold_angle": "40"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
index ed6ce6974..26b39f373 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
@@ -1,14 +1,11 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.30_nozzle_0.6",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.3",
     "initial_layer_print_height": "0.3",
-    "wall_loops": "2",
-    "bottom_shell_layers": "3",
-    "top_shell_layers": "3",
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
@@ -20,15 +17,8 @@
     "top_surface_line_width": "0.62",
     "initial_layer_speed": "35",
     "initial_layer_infill_speed": "55",
-    "outer_wall_speed": "120",
-    "inner_wall_speed": "150",
     "sparse_infill_speed": "100",
-    "internal_solid_infill_speed": "150",
     "top_surface_speed": "150",
-    "gap_infill_speed": "50",
     "bridge_speed": "30",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10"
-}
+    "overhang_3_4_speed": "15"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
index d64d4b6f2..12320f79f 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
@@ -1,35 +1,26 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.32_nozzle_0.8",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.32",
-  "initial_layer_print_height": "0.3",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.82",
-  "outer_wall_line_width": "0.82",
-  "initial_layer_line_width": "0.82",
-  "sparse_infill_line_width": "0.82",
-  "inner_wall_line_width": "0.82",
-  "internal_solid_infill_line_width": "0.82",
-  "support_line_width": "0.82",
-  "top_surface_line_width": "0.82",
-  "top_surface_pattern": "monotonic",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "25",
-  "overhang_4_4_speed": "5"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.32_nozzle_0.8",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.32",
+    "initial_layer_print_height": "0.3",
+    "bridge_flow": "1",
+    "line_width": "0.82",
+    "outer_wall_line_width": "0.82",
+    "initial_layer_line_width": "0.82",
+    "sparse_infill_line_width": "0.82",
+    "inner_wall_line_width": "0.82",
+    "internal_solid_infill_line_width": "0.82",
+    "support_line_width": "0.82",
+    "top_surface_line_width": "0.82",
+    "top_surface_pattern": "monotonic",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
index a8a8a1387..f94531fbe 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
@@ -1,34 +1,24 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.36_nozzle_0.6",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.36",
-  "initial_layer_print_height": "0.3",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.62",
-  "outer_wall_line_width": "0.62",
-  "initial_layer_line_width": "0.62",
-  "sparse_infill_line_width": "0.62",
-  "inner_wall_line_width": "0.62",
-  "internal_solid_infill_line_width": "0.62",
-  "support_line_width": "0.62",
-  "top_surface_line_width": "0.62",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "15",
-  "overhang_4_4_speed": "10"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.36_nozzle_0.6",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.36",
+    "initial_layer_print_height": "0.3",
+    "bridge_flow": "1",
+    "line_width": "0.62",
+    "outer_wall_line_width": "0.62",
+    "initial_layer_line_width": "0.62",
+    "sparse_infill_line_width": "0.62",
+    "inner_wall_line_width": "0.62",
+    "internal_solid_infill_line_width": "0.62",
+    "support_line_width": "0.62",
+    "top_surface_line_width": "0.62",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "15"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
index 503a81b4d..3e0d8b147 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
@@ -1,14 +1,11 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_0.40_nozzle_0.8",
+    "inherits": "fdm_process_bbl_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_bbl_common",
     "layer_height": "0.4",
     "initial_layer_print_height": "0.4",
-    "wall_loops": "2",
-    "bottom_shell_layers": "3",
-    "top_shell_layers": "3",
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
@@ -21,15 +18,9 @@
     "top_surface_pattern": "monotonic",
     "initial_layer_speed": "35",
     "initial_layer_infill_speed": "55",
-    "outer_wall_speed": "120",
-    "inner_wall_speed": "150",
     "sparse_infill_speed": "100",
-    "internal_solid_infill_speed": "150",
     "top_surface_speed": "150",
-    "gap_infill_speed": "50",
     "bridge_speed": "30",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "50",
     "overhang_3_4_speed": "25",
     "overhang_4_4_speed": "5"
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
index 7d9309c1b..07120eef7 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
@@ -1,34 +1,24 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.42_nozzle_0.6",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.42",
-  "initial_layer_print_height": "0.3",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.62",
-  "outer_wall_line_width": "0.62",
-  "initial_layer_line_width": "0.62",
-  "sparse_infill_line_width": "0.62",
-  "inner_wall_line_width": "0.62",
-  "internal_solid_infill_line_width": "0.62",
-  "support_line_width": "0.62",
-  "top_surface_line_width": "0.62",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "15",
-  "overhang_4_4_speed": "10"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.42_nozzle_0.6",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.42",
+    "initial_layer_print_height": "0.3",
+    "bridge_flow": "1",
+    "line_width": "0.62",
+    "outer_wall_line_width": "0.62",
+    "initial_layer_line_width": "0.62",
+    "sparse_infill_line_width": "0.62",
+    "inner_wall_line_width": "0.62",
+    "internal_solid_infill_line_width": "0.62",
+    "support_line_width": "0.62",
+    "top_surface_line_width": "0.62",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "15"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
index 87c7d6b04..3a77fbf00 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
@@ -1,35 +1,26 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.48_nozzle_0.8",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.48",
-  "initial_layer_print_height": "0.4",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.82",
-  "outer_wall_line_width": "0.82",
-  "initial_layer_line_width": "0.82",
-  "sparse_infill_line_width": "0.82",
-  "inner_wall_line_width": "0.82",
-  "internal_solid_infill_line_width": "0.82",
-  "support_line_width": "0.82",
-  "top_surface_line_width": "0.82",
-  "top_surface_pattern": "monotonic",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "25",
-  "overhang_4_4_speed": "5"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.48_nozzle_0.8",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.48",
+    "initial_layer_print_height": "0.4",
+    "bridge_flow": "1",
+    "line_width": "0.82",
+    "outer_wall_line_width": "0.82",
+    "initial_layer_line_width": "0.82",
+    "sparse_infill_line_width": "0.82",
+    "inner_wall_line_width": "0.82",
+    "internal_solid_infill_line_width": "0.82",
+    "support_line_width": "0.82",
+    "top_surface_line_width": "0.82",
+    "top_surface_pattern": "monotonic",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
index 311925326..3970ac5ac 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
@@ -1,35 +1,26 @@
 {
-  "type": "process",
-  "name": "fdm_process_bbl_0.56_nozzle_0.8",
-  "from": "system",
-  "instantiation": "false",
-  "inherits": "fdm_process_bbl_common",
-  "layer_height": "0.56",
-  "initial_layer_print_height": "0.4",
-  "wall_loops": "2",
-  "bottom_shell_layers": "3",
-  "top_shell_layers": "3",
-  "bridge_flow": "1",
-  "line_width": "0.82",
-  "outer_wall_line_width": "0.82",
-  "initial_layer_line_width": "0.82",
-  "sparse_infill_line_width": "0.82",
-  "inner_wall_line_width": "0.82",
-  "internal_solid_infill_line_width": "0.82",
-  "support_line_width": "0.82",
-  "top_surface_line_width": "0.82",
-  "top_surface_pattern": "monotonic",
-  "initial_layer_speed": "35",
-  "initial_layer_infill_speed": "55",
-  "outer_wall_speed": "120",
-  "inner_wall_speed": "150",
-  "sparse_infill_speed": "100",
-  "internal_solid_infill_speed": "150",
-  "top_surface_speed": "150",
-  "gap_infill_speed": "50",
-  "bridge_speed": "30",
-  "overhang_1_4_speed": "0",
-  "overhang_2_4_speed": "50",
-  "overhang_3_4_speed": "25",
-  "overhang_4_4_speed": "5"
-}
+    "type": "process",
+    "name": "fdm_process_bbl_0.56_nozzle_0.8",
+    "inherits": "fdm_process_bbl_common",
+    "from": "system",
+    "instantiation": "false",
+    "layer_height": "0.56",
+    "initial_layer_print_height": "0.4",
+    "bridge_flow": "1",
+    "line_width": "0.82",
+    "outer_wall_line_width": "0.82",
+    "initial_layer_line_width": "0.82",
+    "sparse_infill_line_width": "0.82",
+    "inner_wall_line_width": "0.82",
+    "internal_solid_infill_line_width": "0.82",
+    "support_line_width": "0.82",
+    "top_surface_line_width": "0.82",
+    "top_surface_pattern": "monotonic",
+    "initial_layer_speed": "35",
+    "initial_layer_infill_speed": "55",
+    "sparse_infill_speed": "100",
+    "top_surface_speed": "150",
+    "bridge_speed": "30",
+    "overhang_3_4_speed": "25",
+    "overhang_4_4_speed": "5"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_common.json b/resources/profiles/BBL/process/fdm_process_bbl_common.json
index 99c86b59a..223e2e9eb 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_common.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_common.json
@@ -1,46 +1,28 @@
 {
     "type": "process",
     "name": "fdm_process_bbl_common",
+    "inherits": "fdm_process_common",
     "from": "system",
     "instantiation": "false",
-    "inherits": "fdm_process_common",
-    "adaptive_layer_height": "0",
-    "reduce_crossing_wall": "0",
     "max_travel_detour_distance": "0",
     "bottom_surface_pattern": "monotonic",
     "bottom_shell_layers": "3",
     "bottom_shell_thickness": "0",
-    "bridge_flow": "0.95",
     "bridge_speed": "50",
-    "brim_width": "5",
     "brim_object_gap": "0.1",
-    "compatible_printers": [],
     "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "10000",
-    "bridge_no_support": "0",
     "draft_shield": "disabled",
     "elefant_foot_compensation": "0",
     "enable_arc_fitting": "1",
-    "outer_wall_line_width": "0.42",
-    "outer_wall_speed": "120",
     "outer_wall_acceleration": "5000",
     "wall_infill_order": "inner wall/outer wall/infill",
     "line_width": "0.42",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.2",
     "initial_layer_speed": "30",
     "gap_infill_speed": "50",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
     "sparse_infill_speed": "250",
-    "interface_shells": "0",
     "ironing_flow": "10%",
     "ironing_spacing": "0.15",
     "ironing_speed": "30",
@@ -54,38 +36,22 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
-    "inner_wall_line_width": "0.45",
     "inner_wall_speed": "150",
-    "wall_loops": "2",
-    "print_settings_id": "",
-    "raft_layers": "0",
     "seam_position": "aligned",
-    "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
     "minimum_sparse_infill_area": "15",
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_speed": "150",
-    "spiral_mode": "0",
     "initial_layer_infill_speed": "60",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
     "resolution": "0.012",
     "support_type": "normal(auto)",
     "support_style": "default",
-    "support_on_build_plate_only": "0",
     "support_top_z_distance": "0.2",
     "support_bottom_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.42",
-    "support_interface_loop_pattern": "0",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "2",
     "support_interface_spacing": "0.5",
-	"support_expansion":	"0",
-    "support_interface_speed": "80",
-    "support_base_pattern": "default",
+    "support_expansion": "0",
     "support_base_pattern_spacing": "2.5",
     "support_speed": "150",
     "support_threshold_angle": "30",
@@ -93,9 +59,7 @@
     "tree_support_branch_diameter": "2",
     "tree_support_branch_angle": "45",
     "tree_support_wall_count": "1",
-    "detect_thin_wall": "0",
     "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.42",
     "top_surface_acceleration": "2000",
     "top_surface_speed": "200",
     "top_shell_layers": "3",
@@ -104,7 +68,6 @@
     "enable_prime_tower": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "35",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "wall_generator": "classic"
-}
+    "wall_generator": "classic",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json
index 0177d23c6..921718b99 100644
--- a/resources/profiles/BBL/process/fdm_process_common.json
+++ b/resources/profiles/BBL/process/fdm_process_common.json
@@ -8,7 +8,6 @@
     "bridge_flow": "0.95",
     "bridge_speed": "25",
     "brim_width": "5",
-    "compatible_printers": [],
     "print_sequence": "by layer",
     "default_acceleration": "10000",
     "bridge_no_support": "0",
@@ -67,5 +66,6 @@
     "enable_prime_tower": "0",
     "prime_tower_width": "60",
     "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0"
-}
+    "xy_contour_compensation": "0",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json
index ad55d4bd7..1268b79ac 100644
--- a/resources/profiles/Creality.json
+++ b/resources/profiles/Creality.json
@@ -1,6 +1,6 @@
 {
     "name": "Creality",
-    "version": "01.07.00.02",
+    "version": "01.07.00.03",
     "force_update": "0",
     "description": "Creality configurations",
     "machine_model_list": [
diff --git a/resources/profiles/Creality/machine/Creality CR-6 Max 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 Max 0.2 nozzle.json
index 6d3e0b6a2..de5e4123b 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 Max 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 Max 0.2 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_010",
   "name": "Creality CR-6 Max 0.2 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Creality/machine/Creality CR-6 Max 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 Max 0.4 nozzle.json
index bcaaccc55..33d7319b7 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 Max 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 Max 0.4 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_011",
   "name": "Creality CR-6 Max 0.4 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Creality/machine/Creality CR-6 Max 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 Max 0.6 nozzle.json
index 716a2bd07..9d9d5f661 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 Max 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 Max 0.6 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_012",
   "name": "Creality CR-6 Max 0.6 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Creality/machine/Creality CR-6 Max 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 Max 0.8 nozzle.json
index ce27d0b55..576d5e970 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 Max 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 Max 0.8 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_013",
   "name": "Creality CR-6 Max 0.8 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Creality/machine/Creality CR-6 SE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 SE 0.2 nozzle.json
index c2bb19d11..4d08da635 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 SE 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 SE 0.2 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_014",
   "name": "Creality CR-6 SE 0.2 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Creality/machine/Creality CR-6 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 SE 0.4 nozzle.json
index 66ff95c7b..d28ea3ae4 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 SE 0.4 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_015",
   "name": "Creality CR-6 SE 0.4 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Creality/machine/Creality CR-6 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 SE 0.6 nozzle.json
index 55298c2d4..6780abad7 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 SE 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 SE 0.6 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_016",
   "name": "Creality CR-6 SE 0.6 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Creality/machine/Creality CR-6 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality CR-6 SE 0.8 nozzle.json
index 21ef3ffeb..06adbe86a 100644
--- a/resources/profiles/Creality/machine/Creality CR-6 SE 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-6 SE 0.8 nozzle.json	
@@ -1,5 +1,6 @@
 {
   "type": "machine",
+  "setting_id": "GM_CREALITY_017",
   "name": "Creality CR-6 SE 0.8 nozzle",
   "from": "system",
   "instantiation": "true",
diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json
index 890f5f72a..1e93a3e9d 100644
--- a/resources/profiles/Elegoo.json
+++ b/resources/profiles/Elegoo.json
@@ -343,4 +343,4 @@
             "sub_path": "machine/Elegoo Neptune 3 Max 0.4 nozzle.json"
         }
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json
index f73ea1535..2ea98c0db 100644
--- a/resources/profiles/Prusa.json
+++ b/resources/profiles/Prusa.json
@@ -40,7 +40,6 @@
             "name": "fdm_filament_asa",
             "sub_path": "filament/fdm_filament_asa.json"
         },
-       
         {
             "name": "fdm_filament_pa",
             "sub_path": "filament/fdm_filament_pa.json"
@@ -120,4 +119,4 @@
             "sub_path": "machine/Prusa MINI 0.4 nozzle.json"
         }
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Voron.json b/resources/profiles/Voron.json
index d16eb8f42..a2af0e693 100644
--- a/resources/profiles/Voron.json
+++ b/resources/profiles/Voron.json
@@ -183,4 +183,4 @@
             "sub_path": "machine/Voron 0.1 0.4 nozzle.json"
         }
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/Voxelab.json b/resources/profiles/Voxelab.json
index 0e593d809..b003a6cee 100644
--- a/resources/profiles/Voxelab.json
+++ b/resources/profiles/Voxelab.json
@@ -63,4 +63,4 @@
             "sub_path": "machine/Voxelab Aquila X2 0.4 nozzle.json"
         }
     ]
-}
+}
\ No newline at end of file
diff --git a/resources/profiles/blacklist.json b/resources/profiles/blacklist.json
new file mode 100644
index 000000000..e876cdca8
--- /dev/null
+++ b/resources/profiles/blacklist.json
@@ -0,0 +1,8 @@
+{
+    "filament": [
+        "GFSA03"
+    ],
+    "process": [
+        "GP008"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/check_unused_setting_id.py b/resources/profiles/check_unused_setting_id.py
new file mode 100644
index 000000000..14888a87b
--- /dev/null
+++ b/resources/profiles/check_unused_setting_id.py
@@ -0,0 +1,54 @@
+import os
+import json
+
+setting_id_used=set()
+setting_id_all=set()
+root_dir=os.path.dirname(os.path.abspath(__file__))
+
+
+def loadBlackList():
+    with open(root_dir+'/blacklist.json') as file:
+        data=json.load(file)
+
+    for key,val in data.items():
+        for item in val:
+            setting_id_used.add(item)
+            setting_id_all.add(item)
+
+def traverse_files(path):
+    for file in os.listdir(path):
+        file_path = os.path.join(path, file)
+        if os.path.isdir(file_path):
+            traverse_files(file_path)  # 递归遍历子文件夹
+        elif file_path.endswith('.json'):
+            # 解析 JSON 文件并提取 setting_id 的值
+            with open(file_path) as f:
+                data = json.load(f)
+                if 'setting_id' in data:
+                    setting_id_all.add(data['setting_id'])
+
+def getUsedId(brand):
+    with open(root_dir+'/'+brand+'.json')as file:
+        data=json.load(file)
+
+    key_list=["machine_model_list","machine_list","filament_list","process_list"]
+
+    for key in key_list:
+          for elem in data[key]:
+            path=elem['sub_path']
+            with open(root_dir+'/'+brand+'/'+path) as file:
+                file_data=json.load(file)
+            if 'setting_id' in file_data:
+                setting_id_used.add(file_data['setting_id'])
+
+
+def getTotalId(brand):
+    traverse_files(root_dir+'/'+brand)
+
+
+loadBlackList()
+getUsedId('BBL')
+getTotalId('BBL')
+
+print("unused setting_id :")
+print(setting_id_all.difference(setting_id_used))