Merge pull request #18466 from Ultimaker/CURA-9838_brim_location

Cura 9838 brim location

plugins/3MFWriter/SettingsExportModel.py

@@ -39,7 +39,7 @@ class SettingsExportModel(QObject):
                            'adaptive_layer_height_enabled',
                            'brim_gap',
                            'support_offset',
-                           'brim_outside_only',
+                           'brim_location',
                            'magic_spiralize',
                            'slicing_tolerance',
                            'outer_inset_first',

resources/definitions/erzay3d.def.json

@@ -14,7 +14,7 @@
     {
         "acceleration_print": { "default_value": 1000 },
         "adhesion_type": { "default_value": "skirt" },
-        "brim_outside_only": { "default_value": false },
+        "brim_location": { "default_value": "everywhere" },
         "default_material_print_temperature": { "default_value": 220 },
         "infill_sparse_density": { "default_value": 20 },
         "ironing_flow": { "default_value": 7.0 },

resources/definitions/fdmprinter.def.json

@@ -6069,12 +6069,18 @@
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
-                "brim_outside_only":
+                "brim_location":
                 {
-                    "label": "Brim Only on Outside",
-                    "description": "Only print the brim on the outside of the model. This reduces the amount of brim you need to remove afterwards, while it doesn't reduce the bed adhesion that much.",
-                    "type": "bool",
-                    "default_value": true,
+                    "label": "Brim Location",
+                    "description": "Print a brim on the outside of the model, inside, or both. Depending on the model, this helps reducing the amount of brim you need to remove afterwards, while ensuring a proper bed adhesion.",
+                    "type": "enum",
+                    "options":
+                    {
+                        "outside": "Outside Only",
+                        "inside": "Inside Only",
+                        "everywhere": "Everywhere"
+                    },
+                    "default_value": "outside",
                     "enabled": "resolveOrValue('adhesion_type') == 'brim'",
                     "limit_to_extruder": "skirt_brim_extruder_nr",
                     "settable_per_mesh": false,
@@ -6082,13 +6088,14 @@
                 },
                 "brim_inside_margin":
                 {
-                    "label": "Brim Inside Avoid Margin",
-                    "description": "A part fully enclosed inside another part can generate an outer brim that touches the inside of the other part. This removes all brim within this distance from internal holes.",
+                    "label": "Brim Avoid Margin",
+                    "description": "A brim around a surface may touch an other surface where brim is not expected. This removes all brim within this distance from brimless surfaces.",
                     "unit": "mm",
                     "type": "float",
-                    "default_value": 2.5,
+                    "value": "line_width * 4",
+                    "default_value": "1.6",
                     "minimum_value": "0",
-                    "enabled": "resolveOrValue('adhesion_type') == 'brim' and any(extruderValues('brim_outside_only'))",
+                    "enabled": "resolveOrValue('adhesion_type') == 'brim'",
                     "limit_to_extruder": "skirt_brim_extruder_nr",
                     "settable_per_mesh": false,
                     "settable_per_extruder": true

resources/definitions/inat_base.def.json

@@ -113,7 +113,7 @@
             "minimum_value_warning": "100"
         },
         "adhesion_type": { "value": "'skirt'" },
-        "brim_outside_only": { "value": false },
+        "brim_location": { "value": "everywhere" },
         "cool_fan_speed_min": { "value": "0.5*cool_fan_speed" },
         "cool_min_layer_time_fan_speed_max": { "value": 10 },
         "default_material_bed_temperature": { "maximum_value": "150" },

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg

@@ -14,7 +14,7 @@ weight = 0
 [values]
 adhesion_type = brim
 brim_line_count = 14
-brim_outside_only = True
+brim_location = outside
 brim_width = 8
 connect_infill_polygons = True
 cool_fan_enabled = True

resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg

@@ -14,7 +14,7 @@ weight = 0
 [values]
 adhesion_type = brim
 brim_line_count = 14
-brim_outside_only = True
+brim_location = outside
 brim_width = 8
 connect_infill_polygons = True
 cool_fan_enabled = True

resources/setting_visibility/advanced.cfg

@@ -124,7 +124,7 @@ adhesion_extruder_nr
 skirt_line_count
 brim_width
 brim_line_count
-brim_outside_only
+brim_location
 
 [dual]
 prime_tower_enable

resources/setting_visibility/expert.cfg

@@ -327,7 +327,7 @@ skirt_brim_minimal_length
 brim_width
 brim_gap
 brim_line_count
-brim_outside_only
+brim_location
 brim_smart_ordering
 raft_margin
 raft_smoothing