From 0298e3adcae95f72554e0b4aff3918b86817e6ad Mon Sep 17 00:00:00 2001
From: Ghostkeeper <rubend@tutanota.com>
Date: Tue, 17 May 2016 16:16:43 +0200
Subject: [PATCH] Use default value instead of value

Contributes to issue CURA-1278.
---
 resources/definitions/grr_neo.def.json | 30 +++++++++++++-------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/resources/definitions/grr_neo.def.json b/resources/definitions/grr_neo.def.json
index 710303383b..3fb6804c40 100644
--- a/resources/definitions/grr_neo.def.json
+++ b/resources/definitions/grr_neo.def.json
@@ -14,49 +14,49 @@
 
     "overrides": {
         "machine_width": {
-            "value": 150
+            "default_value": 150
         },
         "machine_height": {
-            "value": 150
+            "default_value": 150
         },
         "machine_depth": {
-            "value": 150
+            "default_value": 150
         },
         "machine_center_is_zero": {
-            "value": false
+            "default_value": false
         },
         "machine_nozzle_size": {
-            "value": 0.5
+            "default_value": 0.5
         },
         "machine_nozzle_heat_up_speed": {
-            "value": 2
+            "default_value": 2
         },
         "machine_nozzle_cool_down_speed": {
-            "value": 2
+            "default_value": 2
         },
         "machine_head_shape_min_x": {
-            "value": 75
+            "default_value": 75
         },
         "machine_head_shape_min_y": {
-            "value": 18
+            "default_value": 18
         },
         "machine_head_shape_max_x": {
-            "value": 18
+            "default_value": 18
         },
         "machine_head_shape_max_y": {
-            "value": 35
+            "default_value": 35
         },
         "machine_nozzle_gantry_distance": {
-            "value": 55
+            "default_value": 55
         },
         "machine_gcode_flavor": {
-            "value": "RepRap (Marlin/Sprinter)"
+            "default_value": "RepRap (Marlin/Sprinter)"
         },
         "machine_start_gcode": {
-            "value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
         },
         "machine_end_gcode": {
-            "value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
         }
     }
 }
\ No newline at end of file