GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-08-12 08:49:03 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #14567 from Ultimaker/CURA-10289/PP-323-improved-support-settings

Browse Source 
CURA-10289/PP-323 improve support settings and properly enable them
This commit is contained in:
Casper Lamboo 2023-02-15 16:33:01 +01:00 committed by GitHub
commit 04c5f42cfd
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 16 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
resources/definitions/fdmprinter.def.json
View File

@ -4698,7 +4698,7 @@
"maximum_value": "999999",
"type": "int",
"value": "1 if (support_interface_pattern == 'zigzag') else 0",
"enabled": "support_interface_enable or support_meshes_present",
"enabled": "(support_enable and support_interface_enable) or support_meshes_present",
"limit_to_extruder": "support_interface_extruder_nr",
"settable_per_mesh": false,
"settable_per_extruder": true,
@ -4715,7 +4715,7 @@
"maximum_value": "999999",
"type": "int",
"value": "support_interface_wall_count",
"enabled": "support_interface_enable or support_meshes_present",
"enabled": "(support_enable and support_interface_enable) or support_meshes_present",
"limit_to_extruder": "support_interface_extruder_nr",
"settable_per_mesh": false,
"settable_per_extruder": true
@ -4731,7 +4731,7 @@
"maximum_value": "999999",
"type": "int",
"value": "support_interface_wall_count",
"enabled": "support_interface_enable or support_meshes_present",
"enabled": "(support_enable and support_interface_enable) or support_meshes_present",
"limit_to_extruder": "support_interface_extruder_nr",
"settable_per_mesh": false,
"settable_per_extruder": true
@ -4957,6 +4957,7 @@
"unit": "mm",
"type": "float",
"default_value": 0.3,
"value": "0 if support_bottom_enable else 0.3",
"limit_to_extruder": "support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr",
"minimum_value": "0",
"maximum_value_warning": "1.0",
@ -4970,10 +4971,10 @@
"unit": "mm",
"type": "float",
"default_value": 5.0,
"limit_to_extruder": "support_interface_extruder_nr if support_interface_enable else support_infill_extruder_nr",
"limit_to_extruder": "support_interface_extruder_nr if support_bottom_enable else support_infill_extruder_nr",
"minimum_value": "0",
"maximum_value_warning": "10.0",
"enabled": "support_enable or support_meshes_present",
"enabled": "(support_enable or support_meshes_present) and support_bottom_stair_step_height > 0",
"settable_per_mesh": true
},
"support_bottom_stair_step_min_slope":
@ -4986,7 +4987,7 @@
"limit_to_extruder": "support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr",
"minimum_value": "0.01",
"maximum_value": "89.99",
"enabled": "support_enable or support_meshes_present",
"enabled": "(support_enable or support_meshes_present) and support_bottom_stair_step_height > 0",
"settable_per_mesh": true
},
"support_join_distance":
@ -4995,10 +4996,10 @@
"description": "The maximum distance between support structures in the X/Y directions. When separate structures are closer together than this value, the structures merge into one.",
"unit": "mm",
"type": "float",
"default_value": 2.0,
"default_value": 5.0,
"limit_to_extruder": "support_infill_extruder_nr",
"minimum_value_warning": "0",
"maximum_value_warning": "10",
"maximum_value_warning": "50",
"enabled": "(support_enable and support_structure == 'normal') or support_meshes_present",
"settable_per_mesh": false,
"settable_per_extruder": true
@ -5009,7 +5010,8 @@
"description": "Amount of offset applied to all support polygons in each layer. Positive values can smooth out the support areas and result in more sturdy support.",
"unit": "mm",
"type": "float",
"default_value": 0,
"default_value": 0.4,
"value": "support_line_width",
"limit_to_extruder": "support_infill_extruder_nr",
"minimum_value_warning": "-1 * machine_nozzle_size",
"maximum_value_warning": "10 * machine_nozzle_size",
@ -5162,7 +5164,8 @@
"description": "When checking where there's model above and below the support, take steps of the given height. Lower values will slice slower, while higher values may cause normal support to be printed in some places where there should have been support interface.",
"unit": "mm",
"type": "float",
"default_value": 0.3,
"default_value": 0.2,
"value": "layer_height",
"minimum_value": "0",
"maximum_value_warning": "support_interface_height",
"limit_to_extruder": "support_interface_extruder_nr",
@ -5474,7 +5477,7 @@
"description": "The diameter of a special tower.",
"unit": "mm",
"type": "float",
"default_value": 3.0,
"default_value": 5.0,
"limit_to_extruder": "support_infill_extruder_nr",
"minimum_value": "0",
"minimum_value_warning": "2 * machine_nozzle_size",

6
resources/definitions/ultimaker.def.json
View File

@ -81,7 +81,7 @@
},
"meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" },
"meshfix_maximum_resolution": { "value": "max(speed_wall_0 / 75, 0.5)" },
"minimum_support_area": { "value": "2" },
"minimum_support_area": { "value": "2 if support_interface_enable else 0" },
"raft_base_speed": { "value": "raft_speed" },
"raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" },
"raft_interface_fan_speed": { "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" },
@ -117,12 +117,10 @@
"support_interface_material_flow": { "value": "skin_material_flow" },
"support_interface_offset": { "value": "support_offset" },
"support_interface_pattern": { "value": "'zigzag'" },
"support_interface_skip_height": { "value": "layer_height" },
"support_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
"support_offset": { "value": "0.9 if support_interface_enable else 0" },
"support_tower_maximum_supported_diameter": { "value": "support_tower_diameter" },
"support_tower_roof_angle": { "value": "0 if support_interface_enable else 65" },
"support_wall_count": { "value": "1 if support_structure == 'tree' else 0" },
"support_xy_distance": { "value": "1" },
"support_xy_distance_overhang": { "value": "0.2" },
"support_z_distance": { "value": "0" },
"top_layers": { "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" },