From 05bfee81586e295073c4144dcc3e139e7597e87d Mon Sep 17 00:00:00 2001
From: DavidGergely <d.gergely@ultimaker.com>
Date: Tue, 14 Aug 2018 15:26:52 +0200
Subject: [PATCH] Fix UM3extended 0.25 variant file

Set ultimaker3_extended_aa0.25.inst.cfg to be the same as the ultimaker3_aa0.25.inst.cfg.
---
 .../variants/ultimaker3_extended_aa0.25.inst.cfg    | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
index b2f81e101c..714b017653 100644
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@@ -11,7 +11,6 @@ hardware_type = nozzle
 [values]
 brim_width = 7
 infill_line_width = 0.23
-infill_overlap = 0
 layer_height_0 = 0.17
 line_width = 0.23
 machine_nozzle_cool_down_speed = 0.85
@@ -21,10 +20,18 @@ machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
+raft_airgap = 0.3
+raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
+raft_jerk = =jerk_print
+raft_margin = 15
+raft_surface_layers = 2
 retraction_count_max = 25
 retraction_extrusion_window = 1
 retraction_min_travel = 0.7
+retraction_prime_speed = =retraction_speed
 skin_overlap = 15
 speed_layer_0 = 20
 speed_print = 55
@@ -32,8 +39,12 @@ speed_topbottom = 20
 speed_wall = =math.ceil(speed_print * 30 / 55)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
+support_pattern = zigzag
 support_top_distance = =support_z_distance
+support_use_towers = True
 support_z_distance = =layer_height * 2
+switch_extruder_prime_speed = =switch_extruder_retraction_speeds
+switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1.2
 wall_line_width_x = 0.23
 wall_thickness = 1.3