Add Profile for Creality Ender 6 (#10437)

CURA-8582

resources/definitions/creality_ender6.def.json

@@ -0,0 +1,41 @@
+{
+    "name": "Creality Ender-6",
+    "version": 2,
+    "inherits": "creality_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creality Ender-6" },
+        "machine_start_gcode": { "default_value": "\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
+        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG28 X Y ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_width": { "default_value": 260 },
+        "machine_depth": { "default_value": 260 },
+        "machine_height": { "default_value": 400 },
+        "z_seam_type": { "value": "'sharpest_corner'"},
+        "z_seam_corner": { "value": "'z_seam_corner_inner'"},
+        "infill_sparse_density": { "value": "10"},
+        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'"},
+        "infill_overlap":{"value": 10},    
+        "material_print_temperature":{"value": 220},
+        "material_bed_temperature":{"value": 50},
+        "retraction_amount":{"value": 10},  
+        "speed_travel": { "value": 80.0 },
+        "coasting_enable": { "value": true},
+        "coasting_min_volume": { "value": 0.5},
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-26, 34],
+                [-26, -32],
+                [32, -32],
+                [32, 34]
+            ]
+        },
+
+        "gantry_height": { "value": 25 },
+
+        "speed_print": { "value": 50.0 },
+        "speed_wall": { "value": 30.0 }
+
+    },
+    "metadata": {
+        "quality_definition": "creality_base",
+        "visible": true
+    }
+}

resources/variants/creality_ender6_0.2.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.2mm Nozzle
+version = 4
+definition = creality_ender6
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.2

resources/variants/creality_ender6_0.3.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.3mm Nozzle
+version = 4
+definition = creality_ender6
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.3

resources/variants/creality_ender6_0.4.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = creality_ender6
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/creality_ender6_0.5.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm Nozzle
+version = 4
+definition = creality_ender6
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/creality_ender6_0.6.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = creality_ender6
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/creality_ender6_0.8.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = creality_ender6
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/creality_ender6_1.0.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm Nozzle
+version = 4
+definition = creality_ender6
+
+[metadata]
+setting_version = 17
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 1.0