set material specific settings

TPU, PP and PVA have a lower retraction count then default. PP-170
2025-08-10 03:28:57 +08:00 · 2022-06-01 15:18:25 +02:00 · 2022-06-01 15:18:25 +02:00 · 0779cbbbdd
commit 0779cbbbdd
parent 3a2a58f546
80 changed files with 80 additions and 84 deletions
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
@ -25,6 +25,7 @@ raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.2
 raft_surface_line_width = 0.2
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
@ -23,6 +23,7 @@ raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_margin = 12
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
@ -26,6 +26,7 @@ raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
 raft_margin = 15
 raft_surface_line_width = 0.5
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@ -25,6 +25,7 @@ raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.2
 raft_surface_line_width = 0.2
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
@ -23,6 +23,7 @@ raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_margin = 12
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@ -26,6 +26,7 @@ raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
 raft_margin = 15
 raft_surface_line_width = 0.5
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
@ -31,9 +31,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 45
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
@ -38,9 +38,8 @@ prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_amount = 6.5
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
@ -36,9 +36,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
@ -37,9 +37,8 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_amount = 7
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
@ -34,9 +34,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@ -31,7 +31,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
@ -15,5 +15,6 @@ variant = BB 0.8
 brim_replaces_support = False
 layer_height = 0.4
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
@ -15,6 +15,7 @@ variant = BB 0.8
 brim_replaces_support = False
 layer_height = 0.3
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@ -31,9 +31,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 6
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@ -36,9 +36,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@ -35,9 +35,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@ -25,7 +25,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@ -29,7 +29,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
@ -15,6 +15,7 @@ is_experimental = True
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
@ -14,5 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
@ -14,6 +14,7 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@ -31,9 +31,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 6
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@ -25,7 +25,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@ -29,7 +29,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
@ -15,6 +15,7 @@ is_experimental = True
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@ -14,5 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@ -14,6 +14,7 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2