Adding Method files that were missing

PP-475

resources/definitions/ultimaker_method.def.json

@@ -0,0 +1,137 @@
+{
+    "version": 2,
+    "name": "UltiMaker Method",
+    "inherits": "ultimaker_method_base",
+    "metadata":
+    {
+        "visible": true,
+        "author": "UltiMaker",
+        "manufacturer": "Ultimaker B.V.",
+        "file_formats": "application/x-makerbot",
+        "platform": "ultimaker_method_platform.stl",
+        "exclude_materials": [
+            "dsm_",
+            "Essentium_",
+            "imade3d_",
+            "chromatik_",
+            "3D-Fuel_",
+            "bestfilament_",
+            "emotiontech_",
+            "eryone_",
+            "eSUN_",
+            "Extrudr_",
+            "fabtotum_",
+            "fdplast_",
+            "filo3d_",
+            "generic_asa_175",
+            "generic_abs_175",
+            "generic_bvoh_175",
+            "generic_petg_175",
+            "generic_pla_175",
+            "generic_tough_pla_175",
+            "generic_pva_175",
+            "generic_cffpa_175",
+            "generic_cpe_175",
+            "generic_nylon_175",
+            "generic_hips_175",
+            "generic_pc_175",
+            "generic_tpu_175",
+            "goofoo_",
+            "ideagen3D_",
+            "imade3d_",
+            "innofill_",
+            "layer_one_",
+            "leapfrog_",
+            "polyflex_pla",
+            "polymax_pla",
+            "polyplus_pla",
+            "polywood_pla",
+            "redd_",
+            "tizyx_",
+            "ultimaker_asa_175",
+            "ultimaker_abs_175",
+            "ultimaker_absr_175",
+            "ultimaker_abscf_175",
+            "ultimaker_bvoh_175",
+            "ultimaker_petg_175",
+            "ultimaker_cffpa_175",
+            "ultimaker_cpe_175",
+            "ultimaker_nylon_175",
+            "ultimaker_hips_175",
+            "ultimaker_pc_175",
+            "ultimaker_tpu_175",
+            "ultimaker_tough_pla_175",
+            "ultimaker_rapidrinse_175",
+            "ultimaker_sr30",
+            "verbatim_",
+            "Vertex_",
+            "volumic_",
+            "xyzprinting_",
+            "zyyx_pro_",
+            "octofiber_",
+            "fiberlogy_"
+        ],
+        "has_machine_materials": true,
+        "has_machine_quality": true,
+        "has_materials": true,
+        "has_variants": true,
+        "machine_extruder_trains":
+        {
+            "0": "ultimaker_method_extruder_left",
+            "1": "ultimaker_method_extruder_right"
+        },
+        "platform_offset": [
+            0,
+            0,
+            16
+        ],
+        "platform_texture": "MakerbotMethod.png",
+        "preferred_material": "ultimaker_pla_175",
+        "preferred_quality_type": "draft",
+        "preferred_variant_name": "1A",
+        "reference_machine_id": "fire_e",
+        "supports_network_connection": true,
+        "supports_usb_connection": false,
+        "variant_definition": "ultimaker_method",
+        "variants_name": "Extruder",
+        "weight": -1
+    },
+    "overrides":
+    {
+        "machine_depth": { "default_value": 236.48 },
+        "machine_disallowed_areas":
+        {
+            "default_value": [
+                [
+                    [-141.65, -118.11],
+                    [141.65, -118.11],
+                    [141.65, -94],
+                    [-141.65, -94]
+                ],
+                [
+                    [-141.65, 118.37],
+                    [141.65, 118.37],
+                    [141.65, 94],
+                    [-141.65, 94]
+                ],
+                [
+                    [-141.65, -118.11],
+                    [-75, -118.11],
+                    [-75, 118.37],
+                    [-141.65, 118.37]
+                ],
+                [
+                    [75, -118.11],
+                    [141.65, -118.11],
+                    [141.65, 118.37],
+                    [75, 118.37]
+                ]
+            ]
+        },
+        "machine_height": { "default_value": 196 },
+        "machine_name": { "default_value": "UltiMaker Method" },
+        "machine_width": { "default_value": 283.3 },
+        "prime_tower_position_x": { "value": "(150 / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (150 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (150 / 2 if resolveOrValue('machine_center_is_zero') else 0)" },
+        "prime_tower_position_y": { "value": "190 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (190 / 2 if resolveOrValue('machine_center_is_zero') else 0)" }
+    }
+}

resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_solid.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+definition = ultimaker_method
+name = Solid
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+intent_category = solid
+type = intent
+
+[values]
+build_volume_temperature = 47
+infill_pattern = lines
+infill_sparse_density = 100
+

resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg

@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1A
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+

resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,52 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg

@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 1C
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+

resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg

@@ -0,0 +1,77 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = 2A
+material = ultimaker_pva_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+brim_replaces_support = False
+cool_fan_enabled = False
+cool_min_speed = 5
+cool_min_temperature = =material_print_temperature
+initial_layer_line_width_factor = 300
+material_bed_temperature = 45
+material_bed_temperature_layer_0 = 50
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 220
+material_standby_temperature = 160
+prime_tower_flow = 125
+raft_airgap = 0.0
+raft_base_wall_count = 4
+raft_interface_flow = 110
+raft_interface_infill_overlap = 50
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.9
+raft_interface_line_width = 1
+raft_interface_speed = 15
+raft_interface_z_offset = -0.05
+raft_surface_flow = 110
+raft_surface_infill_overlap = 50
+raft_surface_line_spacing = 0.44
+raft_surface_line_width = 0.4
+raft_surface_speed = 20
+raft_surface_thickness = 0.27
+raft_surface_z_offset = -0.075
+retraction_speed = 1.75
+speed_layer_0 = 10
+speed_prime_tower = 10
+speed_print = 50
+speed_roofing = 50
+speed_support = 50
+speed_support_bottom = 10
+speed_support_interface = 50
+speed_topbottom = 50
+speed_wall_0 = 50
+speed_wall_x = 50
+support_angle = 50
+support_bottom_density = 99
+support_bottom_height = 0.406
+support_bottom_line_width = 1.2
+support_bottom_wall_count = 2
+support_conical_angle = 20
+support_conical_min_width = 20
+support_fan_enable = False
+support_infill_density_multiplier_layer_0 = 2
+support_infill_rate = 12
+support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
+support_interface_enable = True
+support_interface_offset = 0.8
+support_pattern = grid
+support_roof_density = 95
+support_roof_height = =layer_height*8
+support_wall_count = 2
+support_xy_distance = 0.2
+support_z_distance = 0
+switch_extruder_extra_prime_amount = 1
+switch_extruder_retraction_amount = 2.5
+switch_extruder_retraction_speeds = 3
+

resources/quality/ultimaker_method/um_method_global_Draft_Quality.inst.cfg

@@ -1,15 +1,15 @@
 [general]
-definition = ultimaker_sketch
-name = Fast
 version = 4
+name = Fast
+definition = ultimaker_method
 
 [metadata]
-global_quality = True
-quality_type = draft
 setting_version = 23
 type = quality
+quality_type = draft
 weight = -2
+global_quality = True
 
 [values]
-layer_height = 0.2
+layer_height = 0.203
 

resources/quality/ultimaker_method/um_method_global_Normal_Quality.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Fine
+definition = ultimaker_method
+
+[metadata]
+setting_version = 23
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.1
+

resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -0,0 +1,52 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_nylon12-cf_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+cool_fan_enabled = False
+material_final_print_temperature = =default_material_print_temperature-5
+material_initial_print_temperature = =default_material_print_temperature-5
+raft_airgap = 0.3
+raft_base_line_spacing = 3
+raft_base_line_width = 1.2
+raft_base_speed = 10
+retract_at_layer_change = True
+retraction_amount = 0.5
+retraction_min_travel = 3.2
+roofing_material_flow = 100
+small_skin_width = 3.6
+speed_prime_tower = 30.0
+speed_print = 120.0
+speed_roofing = 55
+speed_topbottom = 55
+speed_travel = 250.0
+speed_wall_0 = 45
+speed_wall_x = 65
+support_angle = 50
+support_bottom_density = 24
+support_bottom_enable = False
+support_bottom_line_width = 0.6
+support_bottom_stair_step_height = 0
+support_fan_enable = False
+support_infill_rate = 12.0
+support_interface_enable = True
+support_interface_pattern = lines
+support_line_width = 0.3
+support_pattern = lines
+support_roof_density = 97
+support_roof_height = 1.015
+support_roof_line_width = 0.25
+support_use_towers = False
+support_xy_distance = 0.2
+support_xy_distance_overhang = 0.15
+support_z_distance = 0.25
+

resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg

@@ -0,0 +1,84 @@
+[general]
+definition = ultimaker_method
+name = Fast
+version = 4
+
+[metadata]
+setting_version = 23
+variant = LABS
+material = ultimaker_pla_175
+quality_type = draft
+type = quality
+weight = -2
+
+[values]
+bottom_layers = 4
+cool_fan_enabled = True
+cool_fan_full_layer = 4
+cool_fan_speed = 100
+cool_fan_speed_0 = 0
+cool_min_layer_time = 10
+cool_min_speed = 5
+cool_min_temperature = 205
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_print_temperature = 210
+material_print_temperature_layer_0 = 225
+material_standby_temperature = 160
+min_bead_width = =line_width * 0.75
+min_wall_line_width = =line_width * 0.75
+raft_airgap = 0.18
+raft_base_line_spacing = 4
+raft_base_line_width = 1.2
+raft_base_speed = =raft_speed
+raft_base_thickness = 0.6
+raft_interface_fan_speed = 0
+raft_interface_layers = 1
+raft_interface_line_spacing = 0.75
+raft_interface_speed = 60
+raft_interface_thickness = 0.2
+raft_speed = 30
+raft_surface_fan_speed = 0
+raft_surface_line_spacing = 0.425
+raft_surface_speed = 90
+raft_surface_wall_count = 2
+retract_at_layer_change = True
+skin_material_flow_layer_0 = =material_flow
+speed_layer_0 = 15
+speed_print = 150
+speed_roofing = =speed_print / 3
+speed_support = =speed_print
+speed_support_interface = 65
+speed_topbottom = =speed_print * 0.6
+speed_wall = =speed_print / 6
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+support_angle = 50.0
+support_bottom_distance = =layer_height
+support_bottom_enable = False
+support_fan_enable = True
+support_infill_angles = [45 ]
+support_infill_rate = 12
+support_infill_sparse_thickness = =layer_height
+support_interface_density = 83
+support_interface_height = =layer_height * 4
+support_interface_material_flow = =material_flow * 0.9
+support_interface_offset = 1
+support_interface_wall_count = 0
+support_line_width = line_width * 0.75
+support_material_flow = =material_flow * 0.8
+support_offset = 3
+support_roof_density = =support_interface_density
+support_roof_height = =layer_height * 4
+support_roof_line_width = =line_width
+support_roof_material_flow = =support_interface_material_flow
+support_roof_wall_count = 1
+support_xy_distance = 0.3
+support_xy_distance_overhang = 0.1
+support_xy_overrides_z = xy_overrides_z
+support_z_distance = 0.15
+switch_extruder_retraction_amount = 0.5
+wall_0_material_flow_layer_0 = =material_flow
+wall_x_material_flow_layer_0 = =material_flow
+

resources/variants/ultimaker_method_1A.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+name = 1A
+version = 4
+definition = ultimaker_method
+
+[metadata]
+setting_version = 23
+type = variant
+reference_extruder_id = mk14
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = 1A
+machine_nozzle_size = 0.4
+

resources/variants/ultimaker_method_1C.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+name = 1C
+version = 4
+definition = ultimaker_method
+
+[metadata]
+setting_version = 23
+type = variant
+reference_extruder_id = mk14_c
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = 1C
+machine_nozzle_size = 0.4
+

resources/variants/ultimaker_method_2A.inst.cfg

@@ -0,0 +1,15 @@
+[general]
+name = 2A
+version = 4
+definition = ultimaker_method
+
+[metadata]
+setting_version = 23
+type = variant
+reference_extruder_id = mk14_s
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = 2A
+machine_nozzle_size = 0.4
+

resources/variants/ultimaker_method_LABS.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+name = LABS
+version = 4
+definition = ultimaker_method
+
+[metadata]
+setting_version = 23
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = LABS
+machine_nozzle_size = 0.4
+