raft interface line spacing can follow default

This is a non critical setting, just follow the default defined in fdmprinter. PP-243
2025-08-12 19:39:03 +08:00 · 2022-09-13 10:33:28 +02:00 · 2022-09-13 10:33:28 +02:00 · 08a5f07d53
commit 08a5f07d53
parent 96569edcf0
68 changed files with 0 additions and 68 deletions
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@ -113,7 +113,6 @@
        "prime_tower_enable": { "default_value": true },
        "raft_airgap": { "value": "0" },
        "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
        "retraction_amount": { "value": "6.5" },
        "retraction_hop": { "value": "2" },
        "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@ -103,7 +103,6 @@
        "raft_airgap": { "value": "0" },
        "raft_base_speed": { "value": "20" },
        "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
        "raft_interface_speed": { "value": "20" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@ -104,7 +104,6 @@
        "raft_airgap": { "value": "0" },
        "raft_base_speed": { "value": "20" },
        "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
        "raft_interface_speed": { "value": "20" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
@ -24,7 +24,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
@ -24,7 +24,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 25
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 25
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
@ -21,7 +21,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
@ -21,7 +21,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
@ -24,7 +24,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
@ -24,7 +24,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 10
 layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
@ -21,7 +21,6 @@ cool_min_speed = 15
 infill_sparse_density = 10
 raft_base_line_spacing = 2
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.12
 raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
-raft_interface_line_spacing = 1.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@ -20,7 +20,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
@ -20,7 +20,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
@ -23,7 +23,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 10
 layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
@ -21,7 +21,6 @@ cool_min_speed = 15
 infill_sparse_density = 10
 raft_base_line_spacing = 2
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@ -22,7 +22,6 @@ layer_0_z_overlap = 0.12
 raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
-raft_interface_line_spacing = 1.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@ -35,7 +35,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@ -35,7 +35,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@ -34,7 +34,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_size = 0.4
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_size = 0.6
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@ -34,7 +34,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_size = 0.4
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@ -16,7 +16,6 @@ machine_nozzle_size = 0.6
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print