GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-04-28 23:04:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #13785 from Ultimaker/CURA-8890-hole-horizontal-expansion-max-diameter

Browse Source 
CURA-8890-hole-horizontal-expansion-max-diameter
This commit is contained in:
Casper Lamboo 2023-03-15 12:50:52 +01:00 committed by GitHub
commit 0a317005d6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
20 changed files with 196 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
resources/definitions/fdmprinter.def.json
View File

@ -1298,6 +1298,18 @@
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_mesh": true
},
"hole_xy_offset_max_diameter":
{
"label": "Hole Horizontal Expansion Max Diameter",
"description": "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded.",
"unit": "mm",
"type": "float",
"default_value": 0,
"minimum_value": "0",
"enabled": "hole_xy_offset > 0",
"limit_to_extruder": "wall_0_extruder_nr",
"settable_per_mesh": true
},
"z_seam_type":
{
"label": "Z Seam Alignment",

10
resources/i18n/cs_CZ/fdmprinter.def.json.po
View File

@ -1641,6 +1641,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Horizontální expanze díry"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6320,6 +6325,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Pokud je větší než nula, combingové pohyby delší než tato vzdálenost budou používat retrakci. Nula znamená, že se při combingových pohybech retrakce provádět nebudou."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/de_DE/fdmprinter.def.json.po
View File

@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Horizontalloch-Erweiterung"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Bei Werten größer als Null verwenden die Combing-Fahrbewegungen, die weiter als über diese Distanz erfolgen, die Einzugsfunktion. Beim Wert Null gibt es keine Maximalstellung, und die Combing-Fahrbewegungen verwenden die Einzugsfunktion nicht."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/es_ES/fdmprinter.def.json.po
View File

@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Expansión horizontal de orificios"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Si es mayor que cero, los movimientos de desplazamiento de peinada que sean superiores a esta distancia utilizarán retracción. Si se establece como cero, no hay un máximo y los movimientos de peinada no utilizarán la retracción."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/fdmprinter.def.json.pot
View File

@ -1161,6 +1161,16 @@ msgctxt "hole_xy_offset description"
msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "z_seam_type label"
msgid "Z Seam Alignment"

10
resources/i18n/fi_FI/fdmprinter.def.json.po
View File

@ -1636,6 +1636,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6319,6 +6324,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

12
resources/i18n/fr_FR/fdmprinter.def.json.po
View File

@ -3,7 +3,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Uranium json setting files\n"
"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
"POT-Creation-Date: 2023-03-14 17:27+0000\n"
"POT-Creation-Date: 2023-03-15 10:57+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE\n"
@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Expansion horizontale des trous"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Lorsque cette distance est supérieure à zéro, les déplacements de détour qui sont plus longs que cette distance utiliseront la rétraction. Si elle est définie sur zéro, il n'y a pas de maximum et les mouvements de détour n'utiliseront pas la rétraction."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/hu_HU/fdmprinter.def.json.po
View File

@ -1641,6 +1641,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6329,6 +6334,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/it_IT/fdmprinter.def.json.po
View File

@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Espansione orizzontale dei fori"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Per un valore superiore a zero, le corse di spostamento in modalità combing superiori a tale distanza utilizzeranno la retrazione. Se il valore impostato è zero, non è presente un valore massimo e le corse in modalità combing non utilizzeranno la retrazione."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/ja_JP/fdmprinter.def.json.po
View File

@ -1636,6 +1636,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "穴の水平展開"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6319,6 +6324,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "ゼロを超える場合、この距離より長い移動量をコーミングすると、引き戻しが使用されます。ゼロに設定した場合、最大値はなく、コーミング移動では引き戻しを使用しません。"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/ko_KR/fdmprinter.def.json.po
View File

@ -1636,6 +1636,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "구멍 수평 확장"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6315,6 +6320,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "0보다 큰 경우 이 거리보다 긴 combing travel은 retraction을 사용합니다. 0으로 설정한 경우 최댓값이 없으며 combing travel은 retraction을 사용하지 않습니다."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/nl_NL/fdmprinter.def.json.po
View File

@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Horizontale uitbreiding gaten"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Wanneer dit groter dan nul is, vindt bij een combing-beweging die langer is dan deze afstand, intrekking plaats. Wanneer dit nul is, is er geen maximum en vindt bij combing-bewegingen geen intrekking plaats."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

12
resources/i18n/pl_PL/fdmprinter.def.json.po
View File

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Cura 5.1\n"
"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
"POT-Creation-Date: 2023-03-14 17:27+0000\n"
"POT-Creation-Date: 2023-03-15 10:57+0000\n"
"PO-Revision-Date: 2019-11-15 15:34+0100\n"
"Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
"Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@ -1642,6 +1642,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6330,6 +6335,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr ""
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/pt_BR/fdmprinter.def.json.po
View File

@ -1643,6 +1643,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Expansão Horizontal do Furo"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6331,6 +6336,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Quando maior que zero, os movimentos de percurso de combing que forem maiores que essa distância usarão retração. Se deixado em zero, não haverá máximo e os movimentos de combing não usarão retração."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/pt_PT/fdmprinter.def.json.po
View File

@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Expansão horizontal de buraco"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Os movimentos de deslocação de Combing com uma distância maior que este valor, quando este é superior a zero, utilizam retrações. Se o valor for definido como zero, não existirá qualquer valor máximo e os movimentos Combing não utilizarão retrações."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/ru_RU/fdmprinter.def.json.po
View File

@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Горизонтальное расширение отверстия"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "При значении параметра выше нуля перемещения комбинга, превышающие заданное расстояние, будут выполняться с откатом. Когда значение параметра равно нулю, то максимума нет и перемещения комбинга выполняются без отката."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/tr_TR/fdmprinter.def.json.po
View File

@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "Delik Yatay Büyüme"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "Sıfırdan büyük olduğunda, bu mesafeden daha uzun tarama mesafelerinde geri çekme yapılır. Sıfıra ayarlandığında, bir maksimum belirlenmez ve tarama hareketlerinde geri çekme kullanılmaz."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

12
resources/i18n/zh_CN/fdmprinter.def.json.po
View File

@ -3,7 +3,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Uranium json setting files\n"
"Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
"POT-Creation-Date: 2023-03-14 17:27+0000\n"
"POT-Creation-Date: 2023-03-15 10:57+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE\n"
@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "孔洞水平扩展"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6317,6 +6322,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "当大于零时，比这段距离更长的梳理空驶将会使用回抽。如果设置为零，则没有最大值，梳理空驶将不会使用回抽。"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

10
resources/i18n/zh_TW/fdmprinter.def.json.po
View File

@ -1643,6 +1643,11 @@ msgctxt "hole_xy_offset label"
msgid "Hole Horizontal Expansion"
msgstr "孔洞水平擴展"
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter label"
msgid "Hole Horizontal Expansion Max Diameter"
msgstr ""
#: fdmprinter.def.json
msgctxt "small_hole_max_size description"
msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@ -6331,6 +6336,11 @@ msgctxt "retraction_combing_max_distance description"
msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
msgstr "觸發回抽時之最小距離，如大於此數值，便開啟回抽；如設置為0，則關閉回抽."
#: fdmprinter.def.json
msgctxt "hole_xy_offset_max_diameter description"
msgid "When greater then zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger then the Hole Horizontal Expansion Max Diameter are not expanded."
msgstr ""
#: fdmprinter.def.json
msgctxt "bridge_skin_material_flow description"
msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."

1
resources/setting_visibility/expert.cfg
View File

@ -38,6 +38,7 @@ fill_outline_gaps
xy_offset
xy_offset_layer_0
hole_xy_offset
hole_xy_offset_max_diameter
z_seam_type
z_seam_position
z_seam_x