diff --git a/resources/definitions/deltacomb_dc20flux.def.json b/resources/definitions/deltacomb_dc20flux.def.json index cc4a38c4d5..50f69636bd 100644 --- a/resources/definitions/deltacomb_dc20flux.def.json +++ b/resources/definitions/deltacomb_dc20flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc21flux.def.json b/resources/definitions/deltacomb_dc21flux.def.json index dd710af627..e09fbeca63 100644 --- a/resources/definitions/deltacomb_dc21flux.def.json +++ b/resources/definitions/deltacomb_dc21flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc30flux.def.json b/resources/definitions/deltacomb_dc30flux.def.json index 789af29650..f59bf53a9a 100644 --- a/resources/definitions/deltacomb_dc30flux.def.json +++ b/resources/definitions/deltacomb_dc30flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/elegoo_neptune_2D.def.json b/resources/definitions/elegoo_neptune_2D.def.json index e564acc036..2d5ef0024e 100644 --- a/resources/definitions/elegoo_neptune_2D.def.json +++ b/resources/definitions/elegoo_neptune_2D.def.json @@ -55,8 +55,8 @@ "settable_per_extruder": false }, "prime_blob_enable": { "default_value": false }, - "prime_tower_mode": { "default_value": "normal" }, "prime_tower_min_volume": { "default_value": 90 }, + "prime_tower_mode": { "default_value": "normal" }, "prime_tower_size": { "default_value": 30 }, "raft_airgap": { "default_value": 0.25 }, "raft_margin": { "default_value": 5 }, diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json index 697dd911b6..89eeac9b75 100644 --- a/resources/definitions/lotmaxx_sc60.def.json +++ b/resources/definitions/lotmaxx_sc60.def.json @@ -44,8 +44,8 @@ "machine_width": { "default_value": 235 }, "meshfix_maximum_resolution": { "value": 0.25 }, "optimize_wall_printing_order": { "value": true }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": 30 }, + "prime_tower_mode": { "value": "normal" }, "retract_at_layer_change": { "value": false }, "retraction_amount": { "value": 4.5 }, "roofing_layer_count": { "value": 1 }, diff --git a/resources/definitions/strateo3d_IDEX420.def.json b/resources/definitions/strateo3d_IDEX420.def.json index 66ecb9999c..785301c51e 100644 --- a/resources/definitions/strateo3d_IDEX420.def.json +++ b/resources/definitions/strateo3d_IDEX420.def.json @@ -112,8 +112,8 @@ "machine_use_extruder_offset_to_offset_coords": { "default_value": false }, "machine_width": { "default_value": 420 }, "material_diameter": { "default_value": 1.75 }, - "prime_tower_mode": { "default_value": "normal" }, "prime_tower_min_volume": { "default_value": 35.6 }, + "prime_tower_mode": { "default_value": "normal" }, "raft_acceleration": { "value": "machine_acceleration" }, "raft_base_acceleration": { "value": "machine_acceleration" }, "raft_interface_acceleration": { "value": "machine_acceleration" }, diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index 8031eb5f08..b046657f4c 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -346,9 +346,9 @@ "prime_tower_base_curve_magnitude": { "value": 2 }, "prime_tower_base_height": { "value": 6 }, "prime_tower_base_size": { "value": 10 }, - "prime_tower_mode": { "value": "none" }, "prime_tower_flow": { "value": "material_flow" }, "prime_tower_line_width": { "value": 1 }, + "prime_tower_mode": { "value": "none" }, "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" }, "prime_tower_wipe_enabled": { "value": true }, "print_sequence": { "enabled": false }, diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg index bab34c73b6..54807c88b3 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg index e0ef960b32..312313c9c5 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg index 55c26edccb..485e82345a 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg index b5fa497a33..7fb90fd093 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg index 1bf050b6f2..ce3fe8c60b 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg index 7cde446656..a95c6ce5d3 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg index d30007f18d..dab7612a6c 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg index a0a1f806ab..7ec446e803 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg index cdadd228be..9913ea3779 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg @@ -25,9 +25,9 @@ material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg index 31baf4022c..54d9c23b98 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg @@ -30,8 +30,8 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature + 19 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg index 408ad54518..289e9d48b7 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg @@ -31,8 +31,8 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg index 9fd95f5c32..c8cad9bb3f 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg @@ -30,8 +30,8 @@ material_initial_print_temperature = =material_print_temperature material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg index a033f60186..538bcfedb9 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg @@ -22,8 +22,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_min_travel = 2 skirt_gap = 2 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg index a8da0b4092..86c4cd1894 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg index d807f97293..83ec574663 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg index 51329150b7..2269a480a5 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg index f201d4c632..4fed169568 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 144a47769b..c9e31486c0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index cedba132eb..e821581360 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 32f623e432..a5817651d8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,9 +17,9 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 63dd03590c..d8f7812d75 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -23,8 +23,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index a81683200f..a689035132 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -23,8 +23,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index cb0e4358d6..f4b61cac5d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -24,8 +24,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg index c005c7c5b9..2ec19359cf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg index f74e725cf0..6726d34585 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg index 95c8026734..0bf76412b2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg index 492d6ce579..437fc03997 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg index 1e7e9614e7..05401c0d34 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg index b9354f3073..a77cde65e6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg index 3c91ac5dc0..355e3afa78 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg index dbb9af642b..e89b5d717b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg index a8c9d2158a..542ba0bb5b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg index 52d2baf4be..3deb8f57a0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg index 689986eca7..fd30dfc228 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg index b709965661..2f21317657 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5