diff --git a/resources/definitions/leapfrog_bolt_pro.def.json b/resources/definitions/leapfrog_bolt_pro.def.json index 09e3d77007..7f6e8ec2ec 100644 --- a/resources/definitions/leapfrog_bolt_pro.def.json +++ b/resources/definitions/leapfrog_bolt_pro.def.json @@ -13,7 +13,6 @@ "supports_usb_connection": false, "supports_network_connection": false, "has_materials": true, - "preferred_material": "leapfrog", "has_machine_quality": true, "has_variants": true, "preferred_variant_name": "Brass 0.4", diff --git a/resources/quality/Leapfrog_Bolt_Pro/Leapfrog_Bolt_Pro_global_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/Leapfrog_Bolt_Pro_global_standard.inst.cfg index 76008cc89b..b94b8ee547 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/Leapfrog_Bolt_Pro_global_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/Leapfrog_Bolt_Pro_global_standard.inst.cfg @@ -4,11 +4,11 @@ name = Standard definition = leapfrog_bolt_pro [metadata] -setting_version = 9 +setting_version = 10 type = quality quality_type = standard weight = 0 global_quality = True [values] -layer_height = 0.15 \ No newline at end of file +layer_height = 0.15 diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg similarity index 97% rename from resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg rename to resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg index 1e8596d84b..15171b26b8 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg @@ -4,18 +4,18 @@ name = Standard definition = leapfrog_bolt_pro [metadata] -setting_version = 9 +setting_version = 10 type = quality quality_type = standard -weight = 1 +weight = 0 material = leapfrog_abs_natural +variant = Brass 0.4 [values] layer_height_0 = 0.3 line_width = 0.4 initial_layer_line_width_factor = 120 - wall_thickness = 0.8 wall_0_wipe_dist = 0.2 top_bottom_thickness = 0.8 @@ -30,9 +30,6 @@ z_seam_type = sharpest_corner z_seam_corner = hide_seam skin_outline_count = 1 - - - infill_sparse_density = 20 infill_pattern = grid connect_infill_polygons = True @@ -41,7 +38,6 @@ infill_wipe_dist = 0 infill_before_walls = True min_infill_area = 0 - retraction_enable = True retract_at_layer_change = False retraction_amount = 2 @@ -49,8 +45,6 @@ retraction_speed = 25 switch_extruder_retraction_amount = 15 switch_extruder_retraction_speeds = 20 - - speed_print = 35 speed_wall = 25 speed_wall_0 = 25 @@ -64,8 +58,6 @@ speed_slowdown_layers = 1 speed_equalize_flow_enabled = True speed_equalize_flow_max = 150 - - retraction_combing = all travel_avoid_other_parts = True travel_avoid_supports = True @@ -75,7 +67,6 @@ retraction_hop = 2 retraction_hop_after_extruder_switch = True retraction_hop_after_extruder_switch_height = 2 - cool_fan_enabled = True cool_fan_speed = 30 cool_fan_speed_min = 0 @@ -101,15 +92,12 @@ support_join_distance = 2 support_tower_diameter = 3 support_tower_roof_angle = 65 - - adhesion_type = brim brim_width = 8 brim_line_count = 14 brim_outside_only = True skirt_brim_minimal_length = 250 - prime_tower_enable = True prime_tower_size = 20 prime_tower_min_volume = 6 diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg new file mode 100644 index 0000000000..8bc19aa8c0 --- /dev/null +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg @@ -0,0 +1,107 @@ +[general] +version = 4 +name = Standard +definition = leapfrog_bolt_pro + +[metadata] +setting_version = 10 +type = quality +quality_type = standard +weight = 0 +material = leapfrog_abs_natural +variant = NozzleX 0.4 + +[values] +layer_height_0 = 0.3 +line_width = 0.4 +initial_layer_line_width_factor = 120 + +wall_thickness = 0.8 +wall_0_wipe_dist = 0.2 +top_bottom_thickness = 0.8 +top_bottom_pattern = lines +optimize_wall_printing_order = True +travel_compensate_overlapping_walls_enabled = True +travel_compensate_overlapping_walls_0_enabled = True +travel_compensate_overlapping_walls_x_enabled = True +fill_perimeter_gaps = everywhere +filter_out_tiny_gaps = True +z_seam_type = sharpest_corner +z_seam_corner = hide_seam +skin_outline_count = 1 + +infill_sparse_density = 20 +infill_pattern = grid +connect_infill_polygons = True +infill_overlap = 0 +infill_wipe_dist = 0 +infill_before_walls = True +min_infill_area = 0 + +retraction_enable = True +retract_at_layer_change = False +retraction_amount = 2 +retraction_speed = 25 +switch_extruder_retraction_amount = 15 +switch_extruder_retraction_speeds = 20 + +speed_print = 35 +speed_wall = 25 +speed_wall_0 = 25 +speed_wall_x = 35 +speed_topbottom = 25 +speed_travel = 200 +speed_layer_0 = 25 +speed_support = 40 +speed_travel_layer_0 = 45 +speed_slowdown_layers = 1 +speed_equalize_flow_enabled = True +speed_equalize_flow_max = 150 + +retraction_combing = all +travel_avoid_other_parts = True +travel_avoid_supports = True +retraction_hop_enabled = True +retraction_hop_only_when_collides = True +retraction_hop = 2 +retraction_hop_after_extruder_switch = True +retraction_hop_after_extruder_switch_height = 2 + +cool_fan_enabled = True +cool_fan_speed = 30 +cool_fan_speed_min = 0 +cool_fan_speed_max = 30 +cool_min_layer_time_fan_speed_max = 5 +cool_fan_speed_0 = 0 +cool_fan_full_at_height = 0.5 +cool_fan_full_layer = 3 +cool_min_layer_time = 5 +cool_min_speed = 10 + +support_interface_enable = False +support_angle = 50 +support_pattern = zigzag +support_connect_zigzags = False +support_infill_rate = 20 +support_z_distance = 0.3 +support_xy_distance = 0.7 +support_xy_distance_overhang = 0.4 +support_bottom_stair_step_height = 0.3 +support_bottom_stair_step_width = 5 +support_join_distance = 2 +support_tower_diameter = 3 +support_tower_roof_angle = 65 + +adhesion_type = brim +brim_width = 8 +brim_line_count = 14 +brim_outside_only = True +skirt_brim_minimal_length = 250 + +prime_tower_enable = True +prime_tower_size = 20 +prime_tower_min_volume = 6 +prime_tower_position_x = 169 +prime_tower_position_y = 25 +prime_tower_wipe_enabled = True +prime_tower_brim_enable = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg similarity index 96% rename from resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_epla_natural_standard.inst.cfg rename to resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg index 85a4bc80c3..20642ff289 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg @@ -4,18 +4,18 @@ name = Standard definition = leapfrog_bolt_pro [metadata] -setting_version = 9 +setting_version = 10 type = quality quality_type = standard -weight = 1 +weight = 0 material = leapfrog_epla_natural +variant = Brass 0.4 [values] layer_height_0 = 0.3 line_width = 0.4 initial_layer_line_width_factor = 120 - wall_thickness = 0.8 wall_0_wipe_dist = 0.2 top_bottom_thickness = 0.8 @@ -30,9 +30,6 @@ z_seam_type = sharpest_corner z_seam_corner = hide_seam skin_outline_count = 1 - - - infill_sparse_density = 20 infill_pattern = grid connect_infill_polygons = True @@ -41,7 +38,6 @@ infill_wipe_dist = 0 infill_before_walls = True min_infill_area = 0 - retraction_enable = True retract_at_layer_change = False retraction_amount = 2 @@ -49,8 +45,6 @@ retraction_speed = 25 switch_extruder_retraction_amount = 15 switch_extruder_retraction_speeds = 20 - - speed_print = 50 speed_wall = 25 speed_wall_0 = 25 @@ -74,7 +68,6 @@ retraction_hop = 2 retraction_hop_after_extruder_switch = True retraction_hop_after_extruder_switch_height = 2 - cool_fan_enabled = True cool_fan_speed = 100 cool_fan_speed_min = 100 @@ -100,18 +93,15 @@ support_join_distance = 2 support_tower_diameter = 3 support_tower_roof_angle = 65 - - adhesion_type = skirt skirt_line_count = 3 skirt_gap = 1 skirt_brim_minimal_length = 250 - prime_tower_enable = True prime_tower_size = 20 prime_tower_min_volume = 6 prime_tower_position_x = 169 prime_tower_position_y = 25 prime_tower_wipe_enabled = True -prime_tower_brim_enable = True \ No newline at end of file +prime_tower_brim_enable = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg new file mode 100644 index 0000000000..d68c3ade1a --- /dev/null +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg @@ -0,0 +1,107 @@ +[general] +version = 4 +name = Standard +definition = leapfrog_bolt_pro + +[metadata] +setting_version = 10 +type = quality +quality_type = standard +weight = 0 +material = leapfrog_epla_natural +variant = NozzleX 0.4 + +[values] +layer_height_0 = 0.3 +line_width = 0.4 +initial_layer_line_width_factor = 120 + +wall_thickness = 0.8 +wall_0_wipe_dist = 0.2 +top_bottom_thickness = 0.8 +top_bottom_pattern = lines +optimize_wall_printing_order = True +travel_compensate_overlapping_walls_enabled = True +travel_compensate_overlapping_walls_0_enabled = True +travel_compensate_overlapping_walls_x_enabled = True +fill_perimeter_gaps = everywhere +filter_out_tiny_gaps = True +z_seam_type = sharpest_corner +z_seam_corner = hide_seam +skin_outline_count = 1 + +infill_sparse_density = 20 +infill_pattern = grid +connect_infill_polygons = True +infill_overlap = 0 +infill_wipe_dist = 0 +infill_before_walls = True +min_infill_area = 0 + +retraction_enable = True +retract_at_layer_change = False +retraction_amount = 2 +retraction_speed = 25 +switch_extruder_retraction_amount = 15 +switch_extruder_retraction_speeds = 20 + +speed_print = 50 +speed_wall = 25 +speed_wall_0 = 25 +speed_wall_x = 40 +speed_topbottom = 25 +speed_travel = 200 +speed_layer_0 = 25 +speed_support = 50 +speed_travel_layer_0 = 45 +speed_slowdown_layers = 1 +speed_equalize_flow_enabled = True +speed_equalize_flow_max = 150 +acceleration_enabled = False + +retraction_combing = all +travel_avoid_other_parts = True +travel_avoid_supports = True +retraction_hop_enabled = False +retraction_hop_only_when_collides = True +retraction_hop = 2 +retraction_hop_after_extruder_switch = True +retraction_hop_after_extruder_switch_height = 2 + +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_min = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 5 +cool_fan_speed_0 = 0 +cool_fan_full_at_height = 0.5 +cool_fan_full_layer = 4 +cool_min_layer_time = 5 +cool_min_speed = 5 + +support_interface_enable = False +support_angle = 50 +support_pattern = zigzag +support_connect_zigzags = False +support_infill_rate = 20 +support_z_distance = 0.3 +support_xy_distance = 0.7 +support_xy_distance_overhang = 0.4 +support_bottom_stair_step_height = 0.3 +support_bottom_stair_step_width = 5 +support_join_distance = 2 +support_tower_diameter = 3 +support_tower_roof_angle = 65 + +adhesion_type = skirt +skirt_line_count = 3 +skirt_gap = 1 +skirt_brim_minimal_length = 250 + +prime_tower_enable = True +prime_tower_size = 20 +prime_tower_min_volume = 6 +prime_tower_position_x = 169 +prime_tower_position_y = 25 +prime_tower_wipe_enabled = True +prime_tower_brim_enable = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg similarity index 96% rename from resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_pva_natural_standard.inst.cfg rename to resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg index 08dd3579e2..8540b72c2f 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg @@ -4,18 +4,18 @@ name = Standard definition = leapfrog_bolt_pro [metadata] -setting_version = 9 +setting_version = 10 type = quality quality_type = standard -weight = 1 +weight = 0 material = leapfrog_pva_natural +variant = Brass 0.4 [values] layer_height_0 = 0.3 line_width = 0.4 initial_layer_line_width_factor = 120 - wall_thickness = 0.8 wall_0_wipe_dist = 0.2 top_bottom_thickness = 0.8 @@ -30,9 +30,6 @@ z_seam_type = sharpest_corner z_seam_corner = hide_seam skin_outline_count = 1 - - - infill_sparse_density = 20 infill_pattern = grid connect_infill_polygons = True @@ -41,7 +38,6 @@ infill_wipe_dist = 0 infill_before_walls = True min_infill_area = 0 - retraction_enable = True retract_at_layer_change = False retraction_amount = 2 @@ -49,8 +45,6 @@ retraction_speed = 25 switch_extruder_retraction_amount = 15 switch_extruder_retraction_speeds = 20 - - speed_print = 50 speed_wall = 20 speed_wall_0 = 20 @@ -69,11 +63,8 @@ travel_avoid_other_parts = True travel_avoid_supports = True retraction_hop_enabled = False - - retraction_hop_after_extruder_switch_height = 2 - cool_fan_enabled = True cool_fan_speed = 100 cool_fan_speed_min = 100 @@ -99,18 +90,15 @@ support_join_distance = 2 support_tower_diameter = 3 support_tower_roof_angle = 65 - - adhesion_type = skirt skirt_line_count = 3 skirt_gap = 1 skirt_brim_minimal_length = 250 - prime_tower_enable = True prime_tower_size = 20 prime_tower_min_volume = 6 prime_tower_position_x = 169 prime_tower_position_y = 25 prime_tower_wipe_enabled = True -prime_tower_brim_enable = True \ No newline at end of file +prime_tower_brim_enable = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg new file mode 100644 index 0000000000..d79cfa51fa --- /dev/null +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg @@ -0,0 +1,104 @@ +[general] +version = 4 +name = Standard +definition = leapfrog_bolt_pro + +[metadata] +setting_version = 10 +type = quality +quality_type = standard +weight = 0 +material = leapfrog_pva_natural +variant = NozzleX 0.4 + +[values] +layer_height_0 = 0.3 +line_width = 0.4 +initial_layer_line_width_factor = 120 + +wall_thickness = 0.8 +wall_0_wipe_dist = 0.2 +top_bottom_thickness = 0.8 +top_bottom_pattern = lines +optimize_wall_printing_order = True +travel_compensate_overlapping_walls_enabled = True +travel_compensate_overlapping_walls_0_enabled = True +travel_compensate_overlapping_walls_x_enabled = True +fill_perimeter_gaps = everywhere +filter_out_tiny_gaps = True +z_seam_type = sharpest_corner +z_seam_corner = hide_seam +skin_outline_count = 1 + +infill_sparse_density = 20 +infill_pattern = grid +connect_infill_polygons = True +infill_overlap = 0 +infill_wipe_dist = 0 +infill_before_walls = True +min_infill_area = 0 + +retraction_enable = True +retract_at_layer_change = False +retraction_amount = 2 +retraction_speed = 25 +switch_extruder_retraction_amount = 15 +switch_extruder_retraction_speeds = 20 + +speed_print = 50 +speed_wall = 20 +speed_wall_0 = 20 +speed_wall_x = 20 +speed_topbottom = 25 +speed_travel = 200 +speed_layer_0 = 25 +speed_support = 40 +speed_travel_layer_0 = 45 +speed_slowdown_layers = 1 +speed_equalize_flow_enabled = True +speed_equalize_flow_max = 150 + +retraction_combing = all +travel_avoid_other_parts = True +travel_avoid_supports = True +retraction_hop_enabled = False + +retraction_hop_after_extruder_switch_height = 2 + +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_min = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 5 +cool_fan_speed_0 = 0 +cool_fan_full_at_height = 0.5 +cool_fan_full_layer = 4 +cool_min_layer_time = 5 +cool_min_speed = 5 + +support_interface_enable = False +support_angle = 50 +support_pattern = zigzag +support_connect_zigzags = False +support_infill_rate = 20 +support_z_distance = 0.3 +support_xy_distance = 0.7 +support_xy_distance_overhang = 0.4 +support_bottom_stair_step_height = 0.3 +support_bottom_stair_step_width = 5 +support_join_distance = 2 +support_tower_diameter = 3 +support_tower_roof_angle = 65 + +adhesion_type = skirt +skirt_line_count = 3 +skirt_gap = 1 +skirt_brim_minimal_length = 250 + +prime_tower_enable = True +prime_tower_size = 20 +prime_tower_min_volume = 6 +prime_tower_position_x = 169 +prime_tower_position_y = 25 +prime_tower_wipe_enabled = True +prime_tower_brim_enable = True diff --git a/resources/variants/Leapfrog_Bolt_Pro_Brass_0.4.inst.cfg b/resources/variants/Leapfrog_Bolt_Pro_Brass_0.4.inst.cfg index 7beb6d44aa..ee8b832034 100644 --- a/resources/variants/Leapfrog_Bolt_Pro_Brass_0.4.inst.cfg +++ b/resources/variants/Leapfrog_Bolt_Pro_Brass_0.4.inst.cfg @@ -4,9 +4,9 @@ version = 4 definition = leapfrog_bolt_pro [metadata] -setting_version = 9 +setting_version = 10 type = variant hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4 diff --git a/resources/variants/Leapfrog_Bolt_Pro_NozzleX_0.4.inst.cfg b/resources/variants/Leapfrog_Bolt_Pro_NozzleX_0.4.inst.cfg index c4a3caf61d..6f0adfb5e1 100644 --- a/resources/variants/Leapfrog_Bolt_Pro_NozzleX_0.4.inst.cfg +++ b/resources/variants/Leapfrog_Bolt_Pro_NozzleX_0.4.inst.cfg @@ -4,9 +4,9 @@ version = 4 definition = leapfrog_bolt_pro [metadata] -setting_version = 9 +setting_version = 10 type = variant hardware_type = nozzle [values] -machine_nozzle_size = 0.4 \ No newline at end of file +machine_nozzle_size = 0.4