diff --git a/resources/definitions/anycubic_i3_mega.def.json b/resources/definitions/anycubic_i3_mega.def.json
new file mode 100644
index 0000000000..a0bd0efb7c
--- /dev/null
+++ b/resources/definitions/anycubic_i3_mega.def.json
@@ -0,0 +1,55 @@
+{
+	"version":2,
+    "name":"Anycubic i3 Mega",
+    "inherits":"fdmprinter",
+    "metadata":{
+        "visible":true,
+        "author":"TheTobby",
+        "manufacturer":"Anycubic",
+        "file_formats":"text/x-gcode",
+        "icon":"icon_ultimaker2",
+        "platform":"anycubic_i3_mega_platform.stl",
+		"has_materials": false,
+		"has_machine_quality": true,
+		"preferred_quality": "*normal*"
+    },
+	
+    "overrides":{
+        "machine_name":{
+            "default_value":"Anycubic i3 Mega"
+        },
+        "machine_heated_bed":{
+            "default_value":true
+        },
+        "machine_width":{
+            "default_value":210
+        },
+        "machine_height":{
+            "default_value":205
+        },
+        "machine_depth":{
+            "default_value":210
+        },
+        "machine_center_is_zero":{
+            "default_value":false
+        },
+        "machine_nozzle_size":{
+            "default_value":0.4
+        },
+        "material_diameter":{
+            "default_value":1.75
+        },
+        "gantry_height":{
+            "default_value":0	
+        },
+        "machine_gcode_flavor":{
+            "default_value":"RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode":{
+            "default_value":"G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\nG5"
+        },
+        "machine_end_gcode":{
+            "default_value":"M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
+        }
+    }
+}
diff --git a/resources/definitions/tevo_blackwidow.def.json b/resources/definitions/tevo_blackwidow.def.json
new file mode 100644
index 0000000000..19ef2a45e2
--- /dev/null
+++ b/resources/definitions/tevo_blackwidow.def.json
@@ -0,0 +1,54 @@
+{
+    "version": 2,
+    "name": "Tevo Black Widow",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "TheTobby",
+        "manufacturer": "Tevo",
+        "file_formats": "text/x-gcode",
+        "icon": "icon_ultimaker2",
+		"has_materials": false,
+        "has_machine_quality": true,
+        "platform": "prusai3_platform.stl",
+		"preferred_quality": "*normal*"
+    },
+    "overrides": {
+        "machine_name": {
+            "default_value": "Tevo Black Widow"
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "machine_width": {
+            "default_value": 350
+        },
+        "machine_height": {
+            "default_value": 250
+        },
+        "machine_depth": {
+            "default_value": 250
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.4
+        },
+        "material_diameter": {
+            "default_value": 1.75			
+        },
+        "gantry_height": {
+            "default_value": 0
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode": {
+            "default_value": "M280 P0 S160 ; release BLTouch alarm (OK to send for Non BLTouch)\M420 Z2 ; set fade leveling at 2mm for BLTouch (OK to send for Non BLTouch)\G28 ; home all\G29 ; probe bed\G92 E0 ;zero the extruded length\G1 X0.0 Y50.0 Z10.0 F3600\; perform wipe and prime\G1 Z0.0 F1000\G1 Z0.2 Y70.0 E9.0 F1000.0 ; prime\G1 Y100.0 E12.5 F1000.0 ; prime\G92 E0 ; zero extruder again\M117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default_value": "G92 E0 ; zero the extruded length again\G1 E-1.5 F500 ; retract the filament to release some of the pressure\M104 S0 ; turn off extruder\M140 S0 ; turn off bed\G28 X0 ; home X axis\G1 Y245 ; move Y axis to end position\M84 ; disable motors\M107 ; turn off fan"
+        }
+    }
+}
diff --git a/resources/meshes/anycubic_i3_mega_platform.stl b/resources/meshes/anycubic_i3_mega_platform.stl
new file mode 100644
index 0000000000..cc3651b9f3
Binary files /dev/null and b/resources/meshes/anycubic_i3_mega_platform.stl differ
diff --git a/resources/meshes/tevo_blackwidow.stl b/resources/meshes/tevo_blackwidow.stl
new file mode 100644
index 0000000000..ef45dd1621
Binary files /dev/null and b/resources/meshes/tevo_blackwidow.stl differ
diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg
new file mode 100644
index 0000000000..ee77117a6b
--- /dev/null
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg
@@ -0,0 +1,60 @@
+[general]
+version = 2
+name = Draft
+definition = anycubic_i3_mega
+
+[metadata]
+type = quality
+quality_type = draft
+weight = 0
+setting_version = 4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 2000
+acceleration_travel = 3500
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 13
+jerk_travel = 13
+layer_height = 0.4
+layer_height_0 = 0.4
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 7
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = 60
+speed_print = 60
+speed_support = 60
+speed_topbottom = 30
+speed_travel = 100
+speed_wall = 60
+speed_wall_x = 60
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
\ No newline at end of file
diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg
new file mode 100644
index 0000000000..884ed5b3f9
--- /dev/null
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg
@@ -0,0 +1,60 @@
+[general]
+version = 2
+name = High
+definition = anycubic_i3_mega
+
+[metadata]
+type = quality
+quality_type = high
+weight = 2
+setting_version = 4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 2000
+acceleration_travel = 3500
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 13
+jerk_travel = 13
+layer_height = 0.1
+layer_height_0 = 0.1
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 7
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = 50
+speed_print = 50
+speed_support = 30
+speed_topbottom = 20
+speed_travel = 50
+speed_wall = 50
+speed_wall_x = 50
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
\ No newline at end of file
diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg
new file mode 100644
index 0000000000..1ecfe49c71
--- /dev/null
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg
@@ -0,0 +1,60 @@
+[general]
+version = 2
+name = Normal
+definition = anycubic_i3_mega
+
+[metadata]
+type = quality
+quality_type = normal
+weight = 1
+setting_version = 4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 2000
+acceleration_travel = 3500
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 13
+jerk_travel = 13
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 7
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = 50
+speed_print = 50
+speed_support = 30
+speed_topbottom = 20
+speed_travel = 100
+speed_wall = 50
+speed_wall_x = 50
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
\ No newline at end of file
diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg
new file mode 100644
index 0000000000..88805021eb
--- /dev/null
+++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 2
+name = Draft
+definition = tevo_blackwidow
+
+[metadata]
+type = quality
+quality_type = draft
+weight = -2
+setting_version = 4
+
+[values]
+brim_width = 4.0
+infill_pattern = zigzag
+layer_height = 0.4
+material_diameter = 1.75
+speed_infill = 50
+speed_print = 50
+speed_support = 30
+speed_topbottom = 20
+speed_travel = 100
+speed_wall = 50
+speed_wall_x = 50
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
\ No newline at end of file
diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg
new file mode 100644
index 0000000000..79d020463f
--- /dev/null
+++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 2
+name = High
+definition = tevo_blackwidow
+
+[metadata]
+type = quality
+quality_type = high
+weight = 1
+setting_version = 4
+
+[values]
+brim_width = 4.0
+infill_pattern = zigzag
+layer_height = 0.1
+material_diameter = 1.75
+speed_infill = 50
+speed_print = 50
+speed_support = 30
+speed_topbottom = 15
+speed_travel = 100
+speed_wall = 50
+speed_wall_x = 50
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
\ No newline at end of file
diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg
new file mode 100644
index 0000000000..2982c44d3d
--- /dev/null
+++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 2
+name = Normal
+definition = tevo_blackwidow
+
+[metadata]
+type = quality
+quality_type = normal
+weight = 0
+setting_version = 4
+
+[values]
+brim_width = 4.0
+infill_pattern = zigzag
+layer_height = 0.2
+material_diameter = 1.75
+speed_infill = 60
+speed_print = 50
+speed_support = 30
+speed_topbottom = 20
+speed_travel = 100
+speed_wall = 50
+speed_wall_x = 50
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
\ No newline at end of file