diff --git a/.github/workflows/conan-package.yml b/.github/workflows/conan-package.yml
index 7ef76ab8d1..9949621251 100644
--- a/.github/workflows/conan-package.yml
+++ b/.github/workflows/conan-package.yml
@@ -75,6 +75,13 @@ jobs:
       - name: Checkout
         uses: actions/checkout@v3
 
+      - name: Cache Conan data
+        id: cache-conan
+        uses: actions/cache@v3
+        with:
+          path: ~/.conan
+          key: ${{ runner.os }}-conan
+
       - name: Setup Python and pip
         uses: actions/setup-python@v4
         with:
@@ -101,7 +108,7 @@ jobs:
           sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-12 12
 
       - name: Create the default Conan profile
-        run: conan profile new default --detect
+        run: conan profile new default --detect --force
 
       - name: Get Conan configuration
         run: conan config install https://github.com/Ultimaker/conan-config.git
diff --git a/.github/workflows/update-translation.yml b/.github/workflows/update-translation.yml
index df8866e2c8..b49bcf1ef2 100644
--- a/.github/workflows/update-translation.yml
+++ b/.github/workflows/update-translation.yml
@@ -27,6 +27,13 @@ jobs:
             -   name: Checkout
                 uses: actions/checkout@v3
 
+            -   name: Cache Conan data
+                id: cache-conan
+                uses: actions/cache@v3
+                with:
+                    path: ~/.conan
+                    key: ${{ runner.os }}-conan
+
             -   name: Setup Python and pip
                 uses: actions/setup-python@v4
                 with:
@@ -53,7 +60,7 @@ jobs:
                     sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-12 12
 
             -   name: Create the default Conan profile
-                run: conan profile new default --detect
+                run: conan profile new default --detect --force
 
             -   name: Get Conan configuration
                 run: conan config install https://github.com/Ultimaker/conan-config.git
diff --git a/packaging/AppImage/AppRun b/packaging/AppImage/AppRun
index fa2c73fb9d..369ce54c6c 100644
--- a/packaging/AppImage/AppRun
+++ b/packaging/AppImage/AppRun
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 scriptdir=$(dirname $0)
 
diff --git a/plugins/3MFReader/ThreeMFWorkspaceReader.py b/plugins/3MFReader/ThreeMFWorkspaceReader.py
index 8813074e31..f25d98a10b 100755
--- a/plugins/3MFReader/ThreeMFWorkspaceReader.py
+++ b/plugins/3MFReader/ThreeMFWorkspaceReader.py
@@ -43,7 +43,7 @@ from .WorkspaceDialog import WorkspaceDialog
 i18n_catalog = i18nCatalog("cura")
 
 
-_ignored_machine_network_metadata = {
+_ignored_machine_network_metadata: Set[str] = {
     "um_cloud_cluster_id",
     "um_network_key",
     "um_linked_to_account",
@@ -55,7 +55,7 @@ _ignored_machine_network_metadata = {
     "capabilities",
     "octoprint_api_key",
     "is_abstract_machine"
-}  # type: Set[str]
+}
 
 
 class ContainerInfo:
@@ -69,41 +69,41 @@ class ContainerInfo:
 
 class QualityChangesInfo:
     def __init__(self) -> None:
-        self.name = None
+        self.name: Optional[str] = None
         self.global_info = None
-        self.extruder_info_dict = {} # type: Dict[str, ContainerInfo]
+        self.extruder_info_dict: Dict[str, ContainerInfo] = {}
 
 
 class MachineInfo:
     def __init__(self) -> None:
-        self.container_id = None
-        self.name = None
-        self.definition_id = None
+        self.container_id: Optional[str] = None
+        self.name: Optional[str] = None
+        self.definition_id: Optional[str] = None
 
-        self.metadata_dict = {}  # type: Dict[str, str]
+        self.metadata_dict: Dict[str, str] = {}
 
-        self.quality_type = None
-        self.intent_category = None
-        self.custom_quality_name = None
-        self.quality_changes_info = None
-        self.variant_info = None
+        self.quality_type: Optional[str] = None
+        self.intent_category: Optional[str] = None
+        self.custom_quality_name: Optional[str] = None
+        self.quality_changes_info: Optional[QualityChangesInfo] = None
+        self.variant_info: Optional[ContainerInfo] = None
 
-        self.definition_changes_info = None
-        self.user_changes_info = None
+        self.definition_changes_info: Optional[ContainerInfo] = None
+        self.user_changes_info: Optional[ContainerInfo] = None
 
-        self.extruder_info_dict = {} # type: Dict[str, ExtruderInfo]
+        self.extruder_info_dict: Dict[str, str] = {}
 
 
 class ExtruderInfo:
     def __init__(self) -> None:
         self.position = None
         self.enabled = True
-        self.variant_info = None
-        self.root_material_id = None
+        self.variant_info: Optional[ContainerInfo] = None
+        self.root_material_id: Optional[str] = None
 
-        self.definition_changes_info = None
-        self.user_changes_info = None
-        self.intent_info = None
+        self.definition_changes_info: Optional[ContainerInfo] = None
+        self.user_changes_info: Optional[ContainerInfo] = None
+        self.intent_info: Optional[ContainerInfo] = None
 
 
 class ThreeMFWorkspaceReader(WorkspaceReader):
@@ -131,14 +131,14 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
         #  - variant
         self._ignored_instance_container_types = {"quality", "variant"}
 
-        self._resolve_strategies = {} # type: Dict[str, str]
+        self._resolve_strategies: Dict[str, str] = {}
 
-        self._id_mapping = {} # type: Dict[str, str]
+        self._id_mapping: Dict[str, str] = {}
 
         # In Cura 2.5 and 2.6, the empty profiles used to have those long names
         self._old_empty_profile_id_dict = {"empty_%s" % k: "empty" for k in ["material", "variant"]}
 
-        self._old_new_materials = {} # type: Dict[str, str]
+        self._old_new_materials: Dict[str, str] = {}
         self._machine_info = None
 
     def _clearState(self):
@@ -461,11 +461,15 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
 
         materials_in_extruders_dict = {}  # Which material is in which extruder
 
-        # if the global stack is found, we check if there are conflicts in the extruder stacks
+        # If the global stack is found, we check if there are conflicts in the extruder stacks
         for extruder_stack_file in extruder_stack_files:
             serialized = archive.open(extruder_stack_file).read().decode("utf-8")
+
+            not_upgraded_parser = ConfigParser(interpolation=None)
+            not_upgraded_parser.read_string(serialized)
+
             serialized = ExtruderStack._updateSerialized(serialized, extruder_stack_file)
-            parser = ConfigParser(interpolation = None)
+            parser = ConfigParser(interpolation=None)
             parser.read_string(serialized)
 
             # The check should be done for the extruder stack that's associated with the existing global stack,
@@ -497,19 +501,26 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
                 extruder_info.user_changes_info = instance_container_info_dict[user_changes_id]
             self._machine_info.extruder_info_dict[position] = extruder_info
 
+            intent_container_id = parser["containers"][str(_ContainerIndexes.Intent)]
+
             intent_id = parser["containers"][str(_ContainerIndexes.Intent)]
             if intent_id not in ("empty", "empty_intent"):
-                extruder_info.intent_info = instance_container_info_dict[intent_id]
+                if intent_container_id in instance_container_info_dict:
+                    extruder_info.intent_info = instance_container_info_dict[intent_id]
+                else:
+                    # It can happen that an intent has been renamed. In that case, we should still use the old
+                    # name, since we used that to generate the instance_container_info_dict keys. 
+                    extruder_info.intent_info = instance_container_info_dict[not_upgraded_parser["containers"][str(_ContainerIndexes.Intent)]]
 
             if not machine_conflict and containers_found_dict["machine"] and global_stack:
                 if int(position) >= len(global_stack.extruderList):
                     continue
 
                 existing_extruder_stack = global_stack.extruderList[int(position)]
-                # check if there are any changes at all in any of the container stacks.
+                # Check if there are any changes at all in any of the container stacks.
                 id_list = self._getContainerIdListFromSerialized(serialized)
                 for index, container_id in enumerate(id_list):
-                    # take into account the old empty container IDs
+                    # Take into account the old empty container IDs
                     container_id = self._old_empty_profile_id_dict.get(container_id, container_id)
                     if existing_extruder_stack.getContainer(index).getId() != container_id:
                         machine_conflict = True
@@ -740,7 +751,7 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
             # quality_changes file. If that's the case, take the extruder count into account when creating the machine
             # or else the extruderList will return only the first extruder, leading to missing non-global settings in
             # the other extruders.
-            machine_extruder_count = self._getMachineExtruderCount()  # type: Optional[int]
+            machine_extruder_count: Optional[int] = self._getMachineExtruderCount()
             global_stack = CuraStackBuilder.createMachine(machine_name, self._machine_info.definition_id, machine_extruder_count)
             if global_stack:  # Only switch if creating the machine was successful.
                 extruder_stack_dict = {str(position): extruder for position, extruder in enumerate(global_stack.extruderList)}
@@ -867,7 +878,7 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
 
     @staticmethod
     def _loadMetadata(file_name: str) -> Dict[str, Dict[str, Any]]:
-        result = dict()  # type: Dict[str, Dict[str, Any]]
+        result: Dict[str, Dict[str, Any]] = dict()
         try:
             archive = zipfile.ZipFile(file_name, "r")
         except zipfile.BadZipFile:
@@ -879,7 +890,6 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
 
         metadata_files = [name for name in archive.namelist() if name.endswith("plugin_metadata.json")]
 
-
         for metadata_file in metadata_files:
             try:
                 plugin_id = metadata_file.split("/")[0]
@@ -920,7 +930,7 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
                 quality_changes_name = self._container_registry.uniqueName(quality_changes_name)
                 for position, container_info in container_info_dict.items():
                     extruder_stack = None
-                    intent_category = None  # type: Optional[str]
+                    intent_category: Optional[str] = None
                     if position is not None:
                         try:
                             extruder_stack = global_stack.extruderList[int(position)]
@@ -1161,7 +1171,7 @@ class ThreeMFWorkspaceReader(WorkspaceReader):
             root_material_id = self._old_new_materials.get(root_material_id, root_material_id)
 
             material_node = machine_node.variants[extruder_stack.variant.getName()].materials[root_material_id]
-            extruder_stack.material = material_node.container  # type: InstanceContainer
+            extruder_stack.material = material_node.container
 
     def _applyChangesToMachine(self, global_stack, extruder_stack_dict):
         # Clear all first
diff --git a/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml b/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml
index c1c54954f1..740e248828 100644
--- a/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml
+++ b/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml
@@ -303,18 +303,17 @@ Item
 
                     Component.onCompleted:
                     {
-                        update()
+                        updateModel();
                     }
 
-                    function update()
+                    function updateModel()
                     {
-                        clear()
-                        for (var i = 1; i <= Cura.MachineManager.activeMachine.maxExtruderCount; i++)
-                        {
+                        clear();
+                        for (var i = 1; i <= Cura.MachineManager.activeMachine.maxExtruderCount; i ++) {
                             // Use String as value. JavaScript only has Number. PropertyProvider.setPropertyValue()
                             // takes a QVariant as value, and Number gets translated into a float. This will cause problem
                             // for integer settings such as "Number of Extruders".
-                            append({ text: String(i), value: String(i) })
+                            append({ text: String(i), value: String(i) });
                         }
                     }
                 }
@@ -322,7 +321,9 @@ Item
                 Connections
                 {
                     target: Cura.MachineManager
-                    function onGlobalContainerChanged() { extruderCountModel.update() }
+                    function onGlobalContainerChanged() {
+                        extruderCountModel.updateModel();
+                    }
                 }
             }
 
diff --git a/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py b/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py
index 7f8d1d118a..54f555b4ae 100644
--- a/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py
+++ b/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py
@@ -46,7 +46,7 @@ class PauseAtHeight(Script):
                 "pause_layer":
                 {
                     "label": "Pause Layer",
-                    "description": "Enter the Number of the LAST layer you want to finish prior to the pause (from the Cura preview).",
+                    "description": "Enter the Number of the LAST layer you want to finish prior to the pause. Note that 0 is the first layer printed.",
                     "type": "int",
                     "value": "math.floor((pause_height - 0.27) / 0.1) + 1",
                     "minimum_value": "0",
diff --git a/plugins/USBPrinting/AutoDetectBaudJob.py b/plugins/USBPrinting/AutoDetectBaudJob.py
index 1ebd74af4f..1b791f6187 100644
--- a/plugins/USBPrinting/AutoDetectBaudJob.py
+++ b/plugins/USBPrinting/AutoDetectBaudJob.py
@@ -53,7 +53,7 @@ class AutoDetectBaudJob(Job):
                     try:
                         serial = Serial(str(self._serial_port), baud_rate, timeout = read_timeout, writeTimeout = write_timeout)
                     except SerialException:
-                        Logger.logException("w", "Unable to create serial")
+                        Logger.warning(f"Unable to create serial connection to {serial} with baud rate {baud_rate}")
                         continue
                 else:
                     # We already have a serial connection, just change the baud rate.
diff --git a/plugins/VersionUpgrade/VersionUpgrade52to53/__init__.py b/plugins/VersionUpgrade/VersionUpgrade52to53/__init__.py
index 9f6d13c5bb..bc0736b6fe 100644
--- a/plugins/VersionUpgrade/VersionUpgrade52to53/__init__.py
+++ b/plugins/VersionUpgrade/VersionUpgrade52to53/__init__.py
@@ -10,6 +10,7 @@ if TYPE_CHECKING:
 
 upgrade = VersionUpgrade52to53.VersionUpgrade52to53()
 
+
 def getMetaData() -> Dict[str, Any]:
     return {
         "version_upgrade": {
@@ -21,6 +22,7 @@ def getMetaData() -> Dict[str, Any]:
             ("quality_changes", 4000020):    ("quality_changes", 4000021,    upgrade.upgradeInstanceContainer),
             ("quality", 4000020):            ("quality", 4000021,            upgrade.upgradeInstanceContainer),
             ("user", 4000020):               ("user", 4000021,               upgrade.upgradeInstanceContainer),
+            ("intent", 4000020):               ("intent", 4000021,               upgrade.upgradeInstanceContainer),
         },
         "sources": {
             "preferences": {
diff --git a/requirements.txt b/requirements.txt
index f9b4e78ed9..4586fee6c3 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -1,46 +1,41 @@
 ### Direct requirements for Uranium and libCharon ###
-PyQt6-sip==13.2.1 \
-    --hash=sha256:b7bce59900b2e0a04f70246de2ccf79ee7933036b6b9183cf039b62eeae2b858 \
-    --hash=sha256:8b52d42e42e6e9f934ac7528cd154ac0210a532bb33fa1edfb4a8bbfb73ff88b \
-    --hash=sha256:0314d011633bc697e99f3f9897b484720e81a5f4ba0eaa5f05c5811e2e74ea53 \
-    --hash=sha256:226e9e349aa16dc1132f106ca01fa99cf7cb8e59daee29304c2fea5fa33212ec
-PyQt6==6.2.3 \
-    --hash=sha256:a9bfcac198fe4b703706f809bb686c7cef5f60a7c802fc145c6b57929c7a6a34 \
-    --hash=sha256:11c039b07962b29246de2da0912f4f663786185fd74d48daac7a270a43c8d92a \
-    --hash=sha256:8a2f357b86fec8598f52f16d5f93416931017ca1986d5f68679c9565bfc21fff \
-    --hash=sha256:577334c9d4518022a4cb6f9799dfbd1b996167eb31404b5a63d6c43d603e6418
-PyQt6-Qt6==6.2.4 \
-    --hash=sha256:42c37475a50ec7e06e0445ac9ce39465f69a86af407ad9b28b183da178d401ee \
-    --hash=sha256:b68543e5d5a4f5d24c26b517569da3cd30b0fbe75390b841e142c160399b3c0a \
-    --hash=sha256:0aa93581b92e01deaf2dcaad88ed6718996a6d84de59ee88316bcba143f008c9 \
-    --hash=sha256:48bc5b7400d6bca13d8c0a145f82295a6da317952ee1a3f107f1cd7d078c8140
-PyQt6-NetworkAuth==6.2.0 \
-    --hash=sha256:23e730cc0d6b828bec2f92d9fac3607871e6033a8af4620e5d4e3afc13bd6c3c \
-    --hash=sha256:b85ee25b01d6cb38d6141df0052b96de2df7f6e69066eaddb22ae238f56be40b \
-    --hash=sha256:e637781a00dd2032d0fd2025af09274898335033763e1dc765a5a99348f60c3b \
-    --hash=sha256:542e9d9a8a5bb78e1f26fa3d35ee01f45209bcf5a35b0cc367aaa85932c29750
-PyQt6-NetworkAuth-Qt6==6.2.4 \
-    --hash=sha256:c7996a9d8c4ce024529ec37981fbfd525ab1a2d497af1281f81f2b6054452d2e \
-    --hash=sha256:1ae9e08e03bd9d5ebdb42dfaccf484a9cc62eeea7504621fe42c005ff1745e66 \
-    --hash=sha256:1363ea81e5c6ac10bfd643e41ba0d215c0d031a57ff1e5972cc4c2a918efe712 \
-    --hash=sha256:8ed4e5e0eaaa42a6f91aba6745eea23fb3ffcbddc6b162016936530ed28dd0ad
-PyQt6-sip==13.2.1 \
-    --hash=sha256:0314d011633bc697e99f3f9897b484720e81a5f4ba0eaa5f05c5811e2e74ea53 \
-    --hash=sha256:082a80264699d4e2e919a7de8b6662886a353863d2b30a0047fe73d42e65c98e \
-    --hash=sha256:0a49f2d0bb49bc9d72665d62fb5ab6549c72dcf49e1e52dc2046edb8832a17a3 \
-    --hash=sha256:0ede42e84a79871022e1a8e4d5c05f70821b2795910c4cd103e863ce62bc8d68 \
-    --hash=sha256:226e9e349aa16dc1132f106ca01fa99cf7cb8e59daee29304c2fea5fa33212ec \
-    --hash=sha256:43afd9c9fdbc5f6ed2e22cae0752a8b8d9545c6d85f314bd27b861e21d4a97fe \
-    --hash=sha256:4b119a8fd880ece15a5bdff583edccd89dbc79d49de2e11cbbd6bba72713d1f3 \
-    --hash=sha256:616b6bad827e9c6e7ce5179883ca0f44110a42dcb045344aa28a495c05e19795 \
-    --hash=sha256:65f5aee6195bd0e785bd74f75ee080a5d5fb840c03210956e4ccbdde481b487c \
-    --hash=sha256:8b52d42e42e6e9f934ac7528cd154ac0210a532bb33fa1edfb4a8bbfb73ff88b \
-    --hash=sha256:a3d53fab72f959b45aeb954124255b585ff8d497a514a2582e0afd808fc2f3da \
-    --hash=sha256:b0d92f4a21706b18ab80c088cded94cd64d32a0c48e1729a4cc53fe5ab93cc1a \
-    --hash=sha256:b7bce59900b2e0a04f70246de2ccf79ee7933036b6b9183cf039b62eeae2b858 \
-    --hash=sha256:c456d5ccc4478254052082e298db01bb9d0495471c1659046697bb5dc9d2506c \
-    --hash=sha256:e2e6a3972169891dbc33d806f50ebf17eaa47a487ff6e4910fe2485c47cb6c2b \
-    --hash=sha256:f4226d4ab239d8655f94c42b397f23e6e85b246f614ff81162ef9321e47f7619
+PyQt6-sip==13.4.1 \
+    --hash=sha256:0df998f2b6ceeacfd10de773441572e215be0c9cae566cc7dd36e231bf714a12 \
+    --hash=sha256:224575e84805c4317bacd5d1b8e93e0ad5c48685dadbbe1e902d4ebe16f22828 \
+    --hash=sha256:36ae29cdc223cacc1257d0f5075cf81474550c6d26b728f922487a2aa935f130 \
+    --hash=sha256:3a674c591d4274d4ea8127205290e927a7dab0eb87a0038d4f4ea1d430782649 \
+    --hash=sha256:3ef9392e4ae29d393b79237d85840cdc6b8831f36eed5d56c7d9b329b380cc8d \
+    --hash=sha256:43935873d60f57719632840d517afee04ef8f30e92cfe0dadc7e6326691920fc \
+    --hash=sha256:5731f22618435654352ef07684549a17be82b75254227fc80b4b5b0b59fc6656 \
+    --hash=sha256:5bc4beb6fb1de4c9ba8beee7b1a4a813fa888c3b095206dafcd25d7e6e4ed2a7 \
+    --hash=sha256:5c36ab984402e96792eebf4b031abfaa589aa20af3190a79c54502c16964d97e \
+    --hash=sha256:a2a0461992c6657f343308b150c4d6b57e9e7a0e5c2f79538434e7fb869ea827 \
+    --hash=sha256:a81490ee84d7a41a126b116081bd97d758f41bf706aee0a8cec24d6e4c660184 \
+    --hash=sha256:e00e287ea05bbc293fc6e2198301962af9b7b622bd2daf4288f925a88ae35dc9 \
+    --hash=sha256:e670a7b2fb7e32204ce67d274017bfff3e21139d217d60cebbfcb75b019c91ee \
+    --hash=sha256:ee06f255787a0b4957f357f93b78d2a11ca3761916833e3afa83f1381d4d1a46 \
+    --hash=sha256:fbee0d554e0e98f56dbf6d94b00a28cc32425938ad7ae98fd91f8822c5b24d45 \
+    --hash=sha256:fcc6d78314783f4a193f02353f431b7ea4d357f47c3c7a7d0740e723f69c64dc
+PyQt6==6.4.2 \
+    --hash=sha256:18d1daf98d9236d55102cdadafd1056f5802f3c9288fcf7238569937b71a89f0 \
+    --hash=sha256:25bd399b4a95dce65d5f937c1aa85d3c7e14a21745ae2a4ca14c0116cd104290 \
+    --hash=sha256:740244f608fe15ee1d89695c43f31a14caeca41c4f02ac36c86dfba4a5d5813d \
+    --hash=sha256:c128bc0f17833e324593e3db83e99470d451a197dd17ff0333927b946c935bd9
+PyQt6-Qt6==6.4.2 \
+    --hash=sha256:9f07c3c100cb46cca4074965e7494d4df4f0fc016497d5303c1fe135822876e1 \
+    --hash=sha256:a29b8c858babd523e80c8db5f8fd19792641588ec04eab49af18b7a4423eb99f \
+    --hash=sha256:c0e91d0275d428496cacff717a9b719c52bfa52b21f124d638b79cc2217bc81e \
+    --hash=sha256:d19c4e72615762cd6f0b043f23fa5f0b02656091427ce6de1efccd58e10e6a53
+PyQt6-NetworkAuth==6.4.0 \
+    --hash=sha256:ab6178b3b2902ae9939a148555cfcee8c7803d6b0d5924cd1bd8f3407b8b9210 \
+    --hash=sha256:c16ec80232d88024b60d04386a23cc93067e5644a65f47f26ffb13d84dcd4a6d \
+    --hash=sha256:c302cd0d838c7229eda5e26e0b1b3d3ec4f8720f8d9379472bce5a89ff0735c2 \
+    --hash=sha256:d948fc0cf43b64afbda2acb5bf2392f785a1e7a2950d79ea850c1a3f4ae12f1a
+PyQt6-NetworkAuth-Qt6==6.4.2 \
+    --hash=sha256:179094bcb4d4d056316c22d3d067cd94d4591da23f804461bfb025ccfa29b2b4 \
+    --hash=sha256:1de6abbb5fa6585b97ae49d3f64b0dfad40bd56b1a31744d9775ff26247241c8 \
+    --hash=sha256:79ec4b0fc9450bbedbff03541b93b10d1c7e761cd2cc16ce70d2b09dcdf8c720 \
+    --hash=sha256:d96d557fe61edb9b68d189f270f0393d6579c8d308e6b0d41bc0699371d7cb4e
 certifi==2021.10.8 \
     --hash=sha256:78884e7c1d4b00ce3cea67b44566851c4343c120abd683433ce934a68ea58872 \
     --hash=sha256:d62a0163eb4c2344ac042ab2bdf75399a71a2d8c7d47eac2e2ee91b9d6339569
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index f783435b3e..0260cc4a0d 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -1298,6 +1298,18 @@
                     "limit_to_extruder": "wall_0_extruder_nr",
                     "settable_per_mesh": true
                 },
+                "hole_xy_offset_max_diameter":
+                {
+                    "label": "Hole Horizontal Expansion Max Diameter",
+                    "description": "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded.",
+                    "unit": "mm",
+                    "type": "float",
+                    "default_value": 0,
+                    "minimum_value": "0",
+                    "enabled": "hole_xy_offset > 0",
+                    "limit_to_extruder": "wall_0_extruder_nr",
+                    "settable_per_mesh": true
+                },
                 "z_seam_type":
                 {
                     "label": "Z Seam Alignment",
@@ -1649,6 +1661,20 @@
                     "limit_to_extruder": "top_bottom_extruder_nr",
                     "settable_per_mesh": true
                 },
+                "small_skin_width":
+                {
+                    "label": "Small Top/Bottom Width",
+                    "description": "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions.",
+                    "value": "skin_line_width * 2",
+                    "default_value": 1,
+                    "minimum_value": "0",
+                    "maximum_value_warning": "skin_line_width * 10",
+                    "type": "float",
+                    "enabled": "(top_layers > 0 or bottom_layers > 0) and top_bottom_pattern != 'concentric'",
+                    "limit_to_extruder": "top_bottom_extruder_nr",
+                    "settable_per_mesh": true,
+                    "unit": "mm"
+                },
                 "skin_no_small_gaps_heuristic":
                 {
                     "label": "No Skin in Z Gaps",
@@ -5679,6 +5705,21 @@
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
+                "skirt_height":
+                {
+                    "label": "Skirt Height",
+                    "description": "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt.",
+                    "type": "int",
+                    "default_value": 3,
+                    "value": "3 if resolveOrValue('skirt_gap') > 0.0 else 1",
+                    "minimum_value": "1",
+                    "maximum_value_warning": "10",
+                    "maximum_value": "machine_height / layer_height",
+                    "enabled": "resolveOrValue('adhesion_type') == 'skirt'",
+                    "limit_to_extruder": "skirt_brim_extruder_nr",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": true
+                },
                 "skirt_gap":
                 {
                     "label": "Skirt Distance",
@@ -5789,6 +5830,17 @@
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
+                "brim_smart_ordering":
+                {
+                    "label": "Smart Brim",
+                    "description": "Swap print order of the innermost and second innermost brim lines. This improves brim removal.",
+                    "type": "bool",
+                    "enabled": "resolveOrValue('adhesion_type') == 'brim'",
+                    "default_value": true,
+                    "limit_to_extruder": "skirt_brim_extruder_nr",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": false
+                },
                 "raft_margin":
                 {
                     "label": "Raft Extra Margin",
diff --git a/resources/definitions/hellbot_magna_SE_300.def.json b/resources/definitions/hellbot_magna_SE_300.def.json
new file mode 100644
index 0000000000..bc60eb3aa7
--- /dev/null
+++ b/resources/definitions/hellbot_magna_SE_300.def.json
@@ -0,0 +1,26 @@
+{
+    "version": 2,
+    "name": "Hellbot Magna SE 300",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Hellbot Development Team",
+        "manufacturer": "Hellbot",
+        "file_formats": "text/x-gcode",
+        "platform": "Hellbot_Magna_SE_300.obj",
+        "has_materials": true,
+        "machine_extruder_trains": { "0": "hellbot_magna_SE_300_extruder" },
+        "platform_texture": "Hellbot_Magna_SE_300.png"
+    },
+    "overrides":
+    {
+        "machine_center_is_zero": { "default_value": false },
+        "machine_depth": { "default_value": 300 },
+        "machine_extruder_count": { "default_value": 1 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 400 },
+        "machine_name": { "default_value": "Hellbot Magna SE 300" },
+        "machine_width": { "default_value": 300 }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/hellbot_magna_SE_Pro.def.json b/resources/definitions/hellbot_magna_SE_Pro.def.json
new file mode 100644
index 0000000000..65f32c2aab
--- /dev/null
+++ b/resources/definitions/hellbot_magna_SE_Pro.def.json
@@ -0,0 +1,26 @@
+{
+    "version": 2,
+    "name": "Hellbot Magna SE Pro",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Hellbot Development Team",
+        "manufacturer": "Hellbot",
+        "file_formats": "text/x-gcode",
+        "platform": "Hellbot_Magna_SE_Pro.obj",
+        "has_materials": true,
+        "machine_extruder_trains": { "0": "hellbot_magna_SE_Pro_extruder" },
+        "platform_texture": "Hellbot_magna_SE_Pro.png"
+    },
+    "overrides":
+    {
+        "machine_center_is_zero": { "default_value": false },
+        "machine_depth": { "default_value": 230 },
+        "machine_extruder_count": { "default_value": 1 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 250 },
+        "machine_name": { "default_value": "Hellbot Magna SE Pro" },
+        "machine_width": { "default_value": 230 }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/mixware_hyper_k.def.json b/resources/definitions/mixware_hyper_k.def.json
new file mode 100644
index 0000000000..1b52bd9359
--- /dev/null
+++ b/resources/definitions/mixware_hyper_k.def.json
@@ -0,0 +1,118 @@
+{
+    "version": 2,
+    "name": "Hyper K",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Mixware",
+        "manufacturer": "Mixware",
+        "file_formats": "text/x-gcode",
+        "platform": "mixware_hyper_k_platform.stl",
+        "has_machine_quality": true,
+        "has_materials": true,
+        "machine_extruder_trains": { "0": "mixware_hyper_k_extruder_0" },
+        "preferred_material": "generic_pla",
+        "preferred_quality": "coarse"
+    },
+    "overrides":
+    {
+        "acceleration_print": { "value": 500 },
+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
+        "acceleration_travel": { "value": 500 },
+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+        "adaptive_layer_height_variation": { "value": 0.04 },
+        "adaptive_layer_height_variation_step": { "value": 0.04 },
+        "adhesion_type": { "value": "'skirt'" },
+        "brim_replaces_support": { "value": false },
+        "brim_width": { "default_value": 3 },
+        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
+        "cool_min_layer_time": { "value": 10 },
+        "fill_outline_gaps": { "value": false },
+        "gantry_height": { "value": 25 },
+        "infill_before_walls": { "value": false },
+        "infill_overlap": { "value": 30.0 },
+        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
+        "infill_wipe_dist": { "value": 0.0 },
+        "ironing_line_spacing": { "default_value": 0.4 },
+        "ironing_pattern": { "default_value": "concentric" },
+        "jerk_print": { "value": 8 },
+        "jerk_travel": { "value": "jerk_print" },
+        "jerk_travel_layer_0": { "value": "jerk_travel" },
+        "machine_acceleration": { "value": 500 },
+        "machine_depth": { "default_value": 225 },
+        "machine_end_gcode": { "default_value": "G91; relative positioning\nG1 Z1.0 F3000 ; move z up little to prevent scratching of print\nG90; absolute positioning\nG1 X0 Y200 F1000 ; prepare for part removal\nM104 S0; turn off extruder\nM140 S0 ; turn off bed\nG1 X0 Y220 F1000 ; prepare for part removal\nM84 ; disable motors\nM106 S0 ; turn off fan" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 250 },
+        "machine_max_acceleration_e": { "value": 5000 },
+        "machine_max_acceleration_x": { "value": 500 },
+        "machine_max_acceleration_y": { "value": 500 },
+        "machine_max_acceleration_z": { "value": 100 },
+        "machine_max_feedrate_e": { "value": 50 },
+        "machine_max_feedrate_x": { "value": 500 },
+        "machine_max_feedrate_y": { "value": 500 },
+        "machine_max_feedrate_z": { "value": 10 },
+        "machine_max_jerk_e": { "value": 5 },
+        "machine_max_jerk_xy": { "value": 10 },
+        "machine_max_jerk_z": { "value": 0.4 },
+        "machine_name": { "default_value": "Hyper K" },
+        "machine_start_gcode": { "default_value": "M140 S{material_bed_temperature} ; Heat bed\nM109 S{material_print_temperature} ; Heat nozzle\nM190 S{material_bed_temperature} ; Wait for bed heating\nG28 ; home all axes\nM117 Purge extruder\nG92 E0 ; reset extruder\nG1 Z5.0 F1000 ; move z up little to prevent scratching of surface\nG1 X0.1 Y20 Z0.3 F5000.0 ; move to start-line position\nG1 X0.1 Y100.0 Z0.3 F1500.0 E15 ; draw 1st line\nG1 X0.4 Y100.0 Z0.3 F5000.0 ; move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; draw 2nd line\nG92 E0 ; reset extruder\nG1 Z5.0 F1000 ; move z up little to prevent scratching of surface" },
+        "machine_width": { "default_value": 225 },
+        "material_diameter": { "default_value": 1.75 },
+        "material_final_print_temperature": { "value": "material_print_temperature" },
+        "material_initial_print_temperature": { "value": "material_print_temperature" },
+        "meshfix_maximum_resolution": { "value": "0.25" },
+        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
+        "minimum_interface_area": { "value": 10 },
+        "minimum_support_area": { "value": 2 },
+        "optimize_wall_printing_order": { "value": "True" },
+        "raft_airgap": { "default_value": 0.24 },
+        "raft_margin":
+        {
+            "default_value": 3,
+            "minimum_value_warning": "0.01"
+        },
+        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },
+        "retraction_combing_max_distance": { "value": 30 },
+        "retraction_count_max": { "value": 100 },
+        "retraction_extrusion_window": { "value": 10 },
+        "retraction_hop": { "value": 0.2 },
+        "retraction_prime_speed": { "maximum_value": 200 },
+        "retraction_retract_speed": { "maximum_value": 200 },
+        "retraction_speed": { "maximum_value": 200 },
+        "skin_overlap": { "value": 10.0 },
+        "skirt_gap": { "value": 10.0 },
+        "skirt_line_count": { "value": 3 },
+        "speed_layer_0": { "value": 20.0 },
+        "speed_prime_tower": { "value": "speed_topbottom" },
+        "speed_print": { "value": 50.0 },
+        "speed_support": { "value": "speed_wall_0" },
+        "speed_support_interface": { "value": "speed_topbottom" },
+        "speed_travel": { "value": "120.0 if speed_print < 60 else 240.0 if speed_print > 100 else speed_print * 2.5" },
+        "speed_travel_layer_0": { "value": "60 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
+        "speed_z_hop": { "value": 5 },
+        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width/2.0/layer_height)))" },
+        "support_brim_enable": { "value": true },
+        "support_brim_width": { "value": 4 },
+        "support_enable": { "default_value": true },
+        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 15" },
+        "support_interface_density": { "value": 33.333 },
+        "support_interface_enable": { "value": true },
+        "support_interface_height": { "value": "layer_height * 4" },
+        "support_interface_pattern": { "value": "'grid'" },
+        "support_type": { "default_value": "buildplate" },
+        "support_use_towers": { "value": false },
+        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
+        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
+        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
+        "top_bottom_pattern": { "default_value": "zigzag" },
+        "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
+        "travel_avoid_supports": { "value": true },
+        "travel_retract_before_outer_wall": { "value": true },
+        "wall_0_wipe_dist": { "value": 0.0 },
+        "wall_thickness": { "value": "line_width * 2" },
+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
+        "z_seam_type": { "value": "'back'" }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/mixware_hyper_s.def.json b/resources/definitions/mixware_hyper_s.def.json
index 16d909c182..60940b2a3c 100644
--- a/resources/definitions/mixware_hyper_s.def.json
+++ b/resources/definitions/mixware_hyper_s.def.json
@@ -78,10 +78,9 @@
             "minimum_value_warning": "0.01"
         },
         "retraction_amount": { "default_value": 2 },
-        "retraction_combing": { "value": "all" },
-        "retraction_combing_max_distance": { "default_value": 30 },
+        "retraction_combing": { "value": "off" },
+        "retraction_combing_max_distance": { "default_value": 0.5 },
         "retraction_count_max": { "default_value": 100 },
-        "retraction_enable": { "default_value": true },
         "retraction_extrusion_window":
         {
             "maximum_value_warning": "20",
@@ -106,29 +105,22 @@
             "maximum_value": "200",
             "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')"
         },
-        "skin_no_small_gaps_heuristic": { "default_value": false },
         "skin_overlap": { "value": 10.0 },
-        "skirt_brim_speed": { "value": "speed_layer_0" },
-        "skirt_gap": { "default_value": 8.0 },
         "skirt_line_count": { "default_value": 3 },
-        "speed_layer_0": { "value": "speed_print / 2" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_print": { "default_value": 40.0 },
-        "speed_roofing": { "value": "speed_topbottom" },
         "speed_support": { "value": "speed_wall_0" },
         "speed_support_interface": { "value": "speed_topbottom" },
         "speed_topbottom": { "value": "speed_print / 2" },
-        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
-        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
-        "speed_wall_0": { "value": "speed_wall" },
+        "speed_travel": { "value": "120.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
+        "speed_travel_layer_0": { "value": "60 if speed_layer_0 < 20 else 120 if speed_layer_0 > 30 else speed_layer_0 * 5" },
         "speed_wall_x": { "value": "speed_wall" },
         "speed_z_hop": { "default_value": 5 },
         "support_angle": { "default_value": 60 },
-        "support_brim_enable": { "value": false },
+        "support_bottom_stair_step_height": { "value": 0.2 },
         "support_brim_width": { "default_value": 4 },
         "support_enable": { "default_value": true },
-        "support_infill_rate": { "value": 15 },
-        "support_interface_density": { "default_value": 33.333 },
+        "support_interface_density": { "default_value": 80 },
         "support_interface_enable": { "default_value": true },
         "support_interface_height": { "value": "layer_height * 4" },
         "support_interface_pattern": { "default_value": "grid" },
@@ -138,14 +130,14 @@
         "support_xy_distance": { "value": "wall_line_width_0 * 2" },
         "support_xy_distance_overhang": { "value": "wall_line_width_0" },
         "support_xy_overrides_z": { "default_value": "xy_overrides_z" },
-        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
+        "support_z_distance": { "value": "layer_height" },
         "top_bottom_pattern": { "default_value": "zigzag" },
-        "top_bottom_thickness": { "default_value": 0.8 },
         "travel_avoid_other_parts": { "default_value": false },
         "travel_avoid_supports": { "default_value": true },
         "travel_retract_before_outer_wall": { "default_value": true },
         "wall_0_wipe_dist": { "value": 0.0 },
         "wall_thickness": { "value": "line_width * 2" },
-        "z_seam_type": { "default_value": "shortest" }
+        "z_seam_corner": { "default_value": "z_seam_corner_weighted" },
+        "z_seam_type": { "default_value": "back" }
     }
 }
\ No newline at end of file
diff --git a/resources/definitions/mixware_vulcan.def.json b/resources/definitions/mixware_vulcan.def.json
new file mode 100644
index 0000000000..7a816de7b8
--- /dev/null
+++ b/resources/definitions/mixware_vulcan.def.json
@@ -0,0 +1,149 @@
+{
+    "version": 2,
+    "name": "Vulcan",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Mixware",
+        "manufacturer": "Mixware",
+        "file_formats": "text/x-gcode",
+        "platform": "mixware_vulcan_platform.stl",
+        "has_machine_quality": true,
+        "has_materials": true,
+        "has_variants": false,
+        "machine_extruder_trains": { "0": "mixware_vulcan_extruder_0" },
+        "preferred_material": "generic_pla",
+        "preferred_quality": "coarse"
+    },
+    "overrides":
+    {
+        "acceleration_enabled": { "default_value": true },
+        "acceleration_print": { "default_value": 500 },
+        "acceleration_travel": { "value": 500 },
+        "adhesion_type": { "default_value": "raft" },
+        "brim_width":
+        {
+            "default_value": 5,
+            "maximum_warning_value": "10",
+            "minimum_warning_value": "0"
+        },
+        "infill_before_walls": { "default_value": false },
+        "layer_height":
+        {
+            "maximum_warning_value": "0.3",
+            "minimum_warning_value": "0.05"
+        },
+        "machine_center_is_zero": { "default_value": true },
+        "machine_depth": { "default_value": 240 },
+        "machine_end_gcode": { "default_value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28\nM84" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_height": { "default_value": 250 },
+        "machine_name": { "default_value": "Vulcan" },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_shape": { "default_value": "elliptic" },
+        "machine_start_gcode": { "default_value": "G28 ;Home\nG1 Z15.0 F6000 ;Move the platform down 15mm\n;Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0" },
+        "machine_width": { "default_value": 240 },
+        "material_bed_temperature":
+        {
+            "maximum_warning_value": "105",
+            "minimum_warning_value": "0"
+        },
+        "material_diameter": { "default_value": 1.75 },
+        "material_print_temperature":
+        {
+            "maximum_warning_value": "250",
+            "minimum_warning_value": "180",
+            "value": 200
+        },
+        "optimize_wall_printing_order": { "default_value": true },
+        "raft_airgap":
+        {
+            "default_value": 0.24,
+            "maximum_warning_value": "0.3",
+            "minimum_warning_value": "0.2"
+        },
+        "raft_margin":
+        {
+            "default_value": 3,
+            "maximum_warning_value": "10",
+            "minimum_warning_value": "0",
+            "minimum_warning_value_warning": "0.01"
+        },
+        "retraction_amount":
+        {
+            "default_value": 5.5,
+            "maximum_warning_value": "5.5",
+            "minimum_warning_value": "4"
+        },
+        "retraction_extrusion_window":
+        {
+            "maximum_warning_value": "5.5",
+            "minimum_warning_value": "4"
+        },
+        "retraction_prime_speed":
+        {
+            "maximum_warning_value": "55",
+            "minimum_warning_value": "40",
+            "value": 40
+        },
+        "retraction_retract_speed":
+        {
+            "maximum_warning_value": "55",
+            "minimum_warning_value": "40",
+            "value": 40
+        },
+        "retraction_speed":
+        {
+            "default_value": 40,
+            "maximum_warning_value": "55",
+            "minimum_warning_value": "40"
+        },
+        "skirt_gap":
+        {
+            "maximum_warning_value": "5",
+            "minimum_warning_value": "0"
+        },
+        "speed_print":
+        {
+            "default_value": 40,
+            "maximum_warning_value": "60",
+            "minimum_warning_value": "5"
+        },
+        "speed_travel":
+        {
+            "maximum_warning_value": "150",
+            "minimum_warning_value": "80",
+            "value": 80
+        },
+        "support_enable": { "default_value": true },
+        "support_infill_rate": { "value": 20 },
+        "support_interface_enable": { "default_value": true },
+        "support_offset": { "value": 0.2 },
+        "support_roof_enable": { "value": true },
+        "support_top_distance":
+        {
+            "maximum_warning_value": "0.25",
+            "minimum_warning_value": "0.15",
+            "value": 0.25
+        },
+        "support_z_distance":
+        {
+            "default_value": 0.25,
+            "maximum_warning_value": "0.25",
+            "minimum_warning_value": "0.15"
+        },
+        "top_bottom_thickness":
+        {
+            "default_value": 1.0,
+            "maximum_warning_value": "2",
+            "minimum_warning_value": "0"
+        },
+        "travel_avoid_other_parts": { "default_value": false },
+        "wall_thickness":
+        {
+            "maximum_warning_value": "2",
+            "minimum_warning_value": "0.4"
+        }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/mixware_wand.def.json b/resources/definitions/mixware_wand.def.json
new file mode 100644
index 0000000000..2d94a24d33
--- /dev/null
+++ b/resources/definitions/mixware_wand.def.json
@@ -0,0 +1,147 @@
+{
+    "version": 2,
+    "name": "Wand",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Mixware",
+        "manufacturer": "Mixware",
+        "file_formats": "text/x-gcode",
+        "platform": "mixware_wand_platform.stl",
+        "has_machine_quality": true,
+        "has_materials": true,
+        "has_variants": false,
+        "machine_extruder_trains": { "0": "mixware_wand_extruder_0" },
+        "preferred_material": "generic_pla",
+        "preferred_quality": "coarse"
+    },
+    "overrides":
+    {
+        "acceleration_enabled": { "default_value": true },
+        "acceleration_print": { "default_value": 500 },
+        "acceleration_travel": { "value": 500 },
+        "adhesion_type": { "default_value": "raft" },
+        "brim_width":
+        {
+            "default_value": 3,
+            "maximum_warning_value": "3",
+            "minimum_warning_value": "0"
+        },
+        "infill_before_walls": { "default_value": false },
+        "layer_height":
+        {
+            "maximum_warning_value": "0.2",
+            "minimum_warning_value": "0.05"
+        },
+        "machine_depth": { "default_value": 102 },
+        "machine_end_gcode": { "default_value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E3 F300\nG1 F1500 Z100\nG28 X0 Y0\nM25\nM84" },
+        "machine_height": { "default_value": 102 },
+        "machine_name": { "default_value": "Wand" },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_start_gcode": { "default_value": "G28 ;Home\n;Prime the extruder\nM117 Print\nG92 E0\nG1 F1500 X-2 Y0 Z0.28\nG1 F2400 X-2 Y70 Z0.28 E8\nG1 F1500 X-1.7 Y70 Z0.28\nG1 F2400 X-1.7 Y0 Z0.28 E16\nG92 E0\nG92 E0\nG1 Z0.18 F2400 ;Move Z Axis up" },
+        "machine_width": { "default_value": 102 },
+        "material_bed_temperature": { "value": 0 },
+        "material_print_temperature":
+        {
+            "maximum_warning_value": "220",
+            "minimum_warning_value": "180",
+            "value": 200
+        },
+        "optimize_wall_printing_order": { "default_value": true },
+        "raft_airgap":
+        {
+            "default_value": 0.23,
+            "maximum_warning_value": "0.3",
+            "minimum_warning_value": "0.2"
+        },
+        "raft_base_line_spacing": { "value": 1.0 },
+        "raft_base_thickness": { "value": 0.36 },
+        "raft_margin":
+        {
+            "default_value": 1,
+            "minimum_warning_value": "0",
+            "minimum_warning_value_warning": "0.01"
+        },
+        "retraction_amount":
+        {
+            "default_value": 4,
+            "maximum_warning_value": "5.5",
+            "minimum_warning_value": "2"
+        },
+        "retraction_extrusion_window":
+        {
+            "maximum_warning_value": "5.5",
+            "minimum_warning_value": "2",
+            "value": 3
+        },
+        "retraction_prime_speed":
+        {
+            "maximum_warning_value": "55",
+            "minimum_warning_value": "40",
+            "value": 40
+        },
+        "retraction_retract_speed":
+        {
+            "maximum_warning_value": "55",
+            "minimum_warning_value": "40",
+            "value": 40
+        },
+        "retraction_speed":
+        {
+            "default_value": 40,
+            "maximum_warning_value": "55",
+            "minimum_warning_value": "40"
+        },
+        "skirt_gap":
+        {
+            "default_value": 2,
+            "maximum_warning_value": "2",
+            "minimum_warning_value": "0"
+        },
+        "speed_print":
+        {
+            "default_value": 40,
+            "maximum_warning_value": "71",
+            "minimum_warning_value": "20"
+        },
+        "speed_travel":
+        {
+            "maximum_warning_value": "120",
+            "minimum_warning_value": "80",
+            "value": 80
+        },
+        "support_angle": { "default_value": 60 },
+        "support_enable": { "default_value": true },
+        "support_infill_rate": { "value": 20 },
+        "support_interface_enable": { "default_value": true },
+        "support_offset": { "value": 0.2 },
+        "support_roof_enable": { "value": true },
+        "support_top_distance":
+        {
+            "maximum_warning_value": "0.25",
+            "minimum_warning_value": "0.15",
+            "value": 0.25
+        },
+        "support_z_distance":
+        {
+            "default_value": 0.25,
+            "maximum_warning_value": "0.25",
+            "minimum_warning_value": "0.15"
+        },
+        "top_bottom_thickness":
+        {
+            "default_value": 1.0,
+            "maximum_warning_value": "2"
+        },
+        "travel_avoid_other_parts": { "default_value": false },
+        "travel_retract_before_outer_wall": { "value": true },
+        "wall_thickness":
+        {
+            "maximum_warning_value": "1.6",
+            "minimum_warning_value": "0.4"
+        },
+        "z_seam_type": { "default_value": "back" },
+        "z_seam_y": { "value": 99 }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/hellbot_magna_SE_300_extruder.def.json b/resources/extruders/hellbot_magna_SE_300_extruder.def.json
new file mode 100644
index 0000000000..7de00b2fae
--- /dev/null
+++ b/resources/extruders/hellbot_magna_SE_300_extruder.def.json
@@ -0,0 +1,20 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "hellbot_magna_SE_300",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr":
+        {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/hellbot_magna_SE_Pro_extruder.def.json b/resources/extruders/hellbot_magna_SE_Pro_extruder.def.json
new file mode 100644
index 0000000000..6271ee36ce
--- /dev/null
+++ b/resources/extruders/hellbot_magna_SE_Pro_extruder.def.json
@@ -0,0 +1,20 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "hellbot_magna_SE_Pro",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr":
+        {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/mixware_hyper_k_extruder_0.def.json b/resources/extruders/mixware_hyper_k_extruder_0.def.json
new file mode 100644
index 0000000000..0aafdbde42
--- /dev/null
+++ b/resources/extruders/mixware_hyper_k_extruder_0.def.json
@@ -0,0 +1,16 @@
+{
+    "version": 2,
+    "name": "Extruder",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "mixware_hyper_k",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/mixware_hyper_s_extruder_0.def.json b/resources/extruders/mixware_hyper_s_extruder_0.def.json
index af1432991e..3e90bba293 100644
--- a/resources/extruders/mixware_hyper_s_extruder_0.def.json
+++ b/resources/extruders/mixware_hyper_s_extruder_0.def.json
@@ -1,6 +1,6 @@
 {
     "version": 2,
-    "name": "Extruder 1",
+    "name": "Extruder",
     "inherits": "fdmextruder",
     "metadata":
     {
diff --git a/resources/extruders/mixware_vulcan_extruder_0.def.json b/resources/extruders/mixware_vulcan_extruder_0.def.json
new file mode 100644
index 0000000000..0e28285e48
--- /dev/null
+++ b/resources/extruders/mixware_vulcan_extruder_0.def.json
@@ -0,0 +1,16 @@
+{
+    "version": 2,
+    "name": "Extruder",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "mixware_vulcan",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/mixware_wand_extruder_0.def.json b/resources/extruders/mixware_wand_extruder_0.def.json
new file mode 100644
index 0000000000..8ba35c5898
--- /dev/null
+++ b/resources/extruders/mixware_wand_extruder_0.def.json
@@ -0,0 +1,16 @@
+{
+    "version": 2,
+    "name": "Extruder",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "mixware_wand",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/i18n/cs_CZ/cura.po b/resources/i18n/cs_CZ/cura.po
index b9c59e230d..1da1f629b7 100644
--- a/resources/i18n/cs_CZ/cura.po
+++ b/resources/i18n/cs_CZ/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: 2023-02-16 20:28+0100\n"
 "Last-Translator: Miroslav Šustek <sustmidown@centrum.cz>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
diff --git a/resources/i18n/cs_CZ/fdmprinter.def.json.po b/resources/i18n/cs_CZ/fdmprinter.def.json.po
index cf64029f9c..4422b41a53 100644
--- a/resources/i18n/cs_CZ/fdmprinter.def.json.po
+++ b/resources/i18n/cs_CZ/fdmprinter.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: 2023-02-16 20:35+0100\n"
 "Last-Translator: Miroslav Šustek <sustmidown@centrum.cz>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
@@ -1641,6 +1641,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Horizontální expanze díry"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3181,6 +3186,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Teplota při tisku první vrstvy"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3666,6 +3676,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Vzdálenost okraj"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3736,6 +3751,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Teplota tisku malých vrstev"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3746,6 +3766,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Drobné části budou vytištěny v procentech jejich normální rychlosti tisku. Pomalejší tisk může pomoci s přilnavostí a přesností."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4271,6 +4301,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Povrchová energie."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6310,6 +6345,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Pokud je větší než nula, combingové pohyby delší než tato vzdálenost budou používat retrakci. Nula znamená, že se při combingových pohybech retrakce provádět nebudou."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot
index 8d72c5be22..7d97de2fb9 100644
--- a/resources/i18n/cura.pot
+++ b/resources/i18n/cura.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -6264,6 +6264,86 @@ msgctxt "name"
 msgid "Cura Profile Writer"
 msgstr ""
 
+#: plugins/ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr ""
+
+#: plugins/ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr ""
+
+#: plugins/CuraProfileReader/plugin.json
+msgctxt "description"
+msgid "Provides support for importing Cura profiles."
+msgstr ""
+
+#: plugins/CuraProfileReader/plugin.json
+msgctxt "name"
+msgid "Cura Profile Reader"
+msgstr ""
+
+#: plugins/MonitorStage/plugin.json
+msgctxt "description"
+msgid "Provides a monitor stage in Cura."
+msgstr ""
+
+#: plugins/MonitorStage/plugin.json
+msgctxt "name"
+msgid "Monitor Stage"
+msgstr ""
+
+#: plugins/SliceInfoPlugin/plugin.json
+msgctxt "description"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr ""
+
+#: plugins/SliceInfoPlugin/plugin.json
+msgctxt "name"
+msgid "Slice info"
+msgstr ""
+
+#: plugins/PerObjectSettingsTool/plugin.json
+msgctxt "description"
+msgid "Provides the Per Model Settings."
+msgstr ""
+
+#: plugins/PerObjectSettingsTool/plugin.json
+msgctxt "name"
+msgid "Per Model Settings Tool"
+msgstr ""
+
+#: plugins/GCodeWriter/plugin.json
+msgctxt "description"
+msgid "Writes g-code to a file."
+msgstr ""
+
+#: plugins/GCodeWriter/plugin.json
+msgctxt "name"
+msgid "G-code Writer"
+msgstr ""
+
+#: plugins/LegacyProfileReader/plugin.json
+msgctxt "description"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr ""
+
+#: plugins/LegacyProfileReader/plugin.json
+msgctxt "name"
+msgid "Legacy Cura Profile Reader"
+msgstr ""
+
+#: plugins/SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr ""
+
+#: plugins/SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr ""
+
 #: plugins/UFPWriter/plugin.json
 msgctxt "description"
 msgid "Provides support for writing Ultimaker Format Packages."
@@ -6274,6 +6354,146 @@ msgctxt "name"
 msgid "UFP Writer"
 msgstr ""
 
+#: plugins/ImageReader/plugin.json
+msgctxt "description"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr ""
+
+#: plugins/ImageReader/plugin.json
+msgctxt "name"
+msgid "Image Reader"
+msgstr ""
+
+#: plugins/GCodeGzWriter/plugin.json
+msgctxt "description"
+msgid "Writes g-code to a compressed archive."
+msgstr ""
+
+#: plugins/GCodeGzWriter/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Writer"
+msgstr ""
+
+#: plugins/SimulationView/plugin.json
+msgctxt "description"
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
+
+#: plugins/SimulationView/plugin.json
+msgctxt "name"
+msgid "Simulation View"
+msgstr ""
+
+#: plugins/PrepareStage/plugin.json
+msgctxt "description"
+msgid "Provides a prepare stage in Cura."
+msgstr ""
+
+#: plugins/PrepareStage/plugin.json
+msgctxt "name"
+msgid "Prepare Stage"
+msgstr ""
+
+#: plugins/UFPReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr ""
+
+#: plugins/UFPReader/plugin.json
+msgctxt "name"
+msgid "UFP Reader"
+msgstr ""
+
+#: plugins/SolidView/plugin.json
+msgctxt "description"
+msgid "Provides a normal solid mesh view."
+msgstr ""
+
+#: plugins/SolidView/plugin.json
+msgctxt "name"
+msgid "Solid View"
+msgstr ""
+
+#: plugins/FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr ""
+
+#: plugins/FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr ""
+
+#: plugins/SupportEraser/plugin.json
+msgctxt "description"
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr ""
+
+#: plugins/SupportEraser/plugin.json
+msgctxt "name"
+msgid "Support Eraser"
+msgstr ""
+
+#: plugins/GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr ""
+
+#: plugins/GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr ""
+
+#: plugins/Marketplace/plugin.json
+msgctxt "description"
+msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website."
+msgstr ""
+
+#: plugins/Marketplace/plugin.json
+msgctxt "name"
+msgid "Marketplace"
+msgstr ""
+
+#: plugins/FirmwareUpdater/plugin.json
+msgctxt "description"
+msgid "Provides a machine actions for updating firmware."
+msgstr ""
+
+#: plugins/FirmwareUpdater/plugin.json
+msgctxt "name"
+msgid "Firmware Updater"
+msgstr ""
+
+#: plugins/CuraDrive/plugin.json
+msgctxt "description"
+msgid "Backup and restore your configuration."
+msgstr ""
+
+#: plugins/CuraDrive/plugin.json
+msgctxt "name"
+msgid "Cura Backups"
+msgstr ""
+
+#: plugins/USBPrinting/plugin.json
+msgctxt "description"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr ""
+
+#: plugins/USBPrinting/plugin.json
+msgctxt "name"
+msgid "USB printing"
+msgstr ""
+
+#: plugins/XRayView/plugin.json
+msgctxt "description"
+msgid "Provides the X-Ray view."
+msgstr ""
+
+#: plugins/XRayView/plugin.json
+msgctxt "name"
+msgid "X-Ray View"
+msgstr ""
+
 #: plugins/PostProcessingPlugin/plugin.json
 msgctxt "description"
 msgid "Extension that allows for user created scripts for post processing"
@@ -6284,6 +6504,346 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr ""
 
+#: plugins/3MFWriter/plugin.json
+msgctxt "description"
+msgid "Provides support for writing 3MF files."
+msgstr ""
+
+#: plugins/3MFWriter/plugin.json
+msgctxt "name"
+msgid "3MF Writer"
+msgstr ""
+
+#: plugins/AMFReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading AMF files."
+msgstr ""
+
+#: plugins/AMFReader/plugin.json
+msgctxt "name"
+msgid "AMF Reader"
+msgstr ""
+
+#: plugins/CuraEngineBackend/plugin.json
+msgctxt "description"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr ""
+
+#: plugins/CuraEngineBackend/plugin.json
+msgctxt "name"
+msgid "CuraEngine Backend"
+msgstr ""
+
+#: plugins/TrimeshReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading model files."
+msgstr ""
+
+#: plugins/TrimeshReader/plugin.json
+msgctxt "name"
+msgid "Trimesh Reader"
+msgstr ""
+
+#: plugins/XmlMaterialProfile/plugin.json
+msgctxt "description"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr ""
+
+#: plugins/XmlMaterialProfile/plugin.json
+msgctxt "name"
+msgid "Material Profiles"
+msgstr ""
+
+#: plugins/RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr ""
+
+#: plugins/RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr ""
+
+#: plugins/UM3NetworkPrinting/plugin.json
+msgctxt "description"
+msgid "Manages network connections to UltiMaker networked printers."
+msgstr ""
+
+#: plugins/UM3NetworkPrinting/plugin.json
+msgctxt "name"
+msgid "UltiMaker Network Connection"
+msgstr ""
+
+#: plugins/X3DReader/plugin.json
+msgctxt "description"
+msgid "Provides support for reading X3D files."
+msgstr ""
+
+#: plugins/X3DReader/plugin.json
+msgctxt "name"
+msgid "X3D Reader"
+msgstr ""
+
+#: plugins/MachineSettingsAction/plugin.json
+msgctxt "description"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr ""
+
+#: plugins/MachineSettingsAction/plugin.json
+msgctxt "name"
+msgid "Machine Settings Action"
+msgstr ""
+
+#: plugins/DigitalLibrary/plugin.json
+msgctxt "description"
+msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
+msgstr ""
+
+#: plugins/DigitalLibrary/plugin.json
+msgctxt "name"
+msgid "Ultimaker Digital Library"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.9 to 4.10"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.11 to Cura 4.12."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.11 to 4.12"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 5.2 to Cura 5.3."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 5.2 to 5.3"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr ""
+
+#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr ""
+
 #: plugins/3MFReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading 3MF files."
@@ -6304,94 +6864,14 @@ msgctxt "name"
 msgid "UltiMaker machine actions"
 msgstr ""
 
-#: plugins/GCodeGzWriter/plugin.json
+#: plugins/GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
+msgid "Provides support for importing profiles from g-code files."
 msgstr ""
 
-#: plugins/GCodeGzWriter/plugin.json
+#: plugins/GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr ""
-
-#: plugins/DigitalLibrary/plugin.json
-msgctxt "description"
-msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library."
-msgstr ""
-
-#: plugins/DigitalLibrary/plugin.json
-msgctxt "name"
-msgid "Ultimaker Digital Library"
-msgstr ""
-
-#: plugins/CuraDrive/plugin.json
-msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr ""
-
-#: plugins/CuraDrive/plugin.json
-msgctxt "name"
-msgid "Cura Backups"
-msgstr ""
-
-#: plugins/3MFWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr ""
-
-#: plugins/3MFWriter/plugin.json
-msgctxt "name"
-msgid "3MF Writer"
-msgstr ""
-
-#: plugins/MachineSettingsAction/plugin.json
-msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr ""
-
-#: plugins/MachineSettingsAction/plugin.json
-msgctxt "name"
-msgid "Machine Settings Action"
-msgstr ""
-
-#: plugins/SentryLogger/plugin.json
-msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
-
-#: plugins/SentryLogger/plugin.json
-msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
-
-#: plugins/SolidView/plugin.json
-msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr ""
-
-#: plugins/SolidView/plugin.json
-msgctxt "name"
-msgid "Solid View"
-msgstr ""
-
-#: plugins/PreviewStage/plugin.json
-msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr ""
-
-#: plugins/PreviewStage/plugin.json
-msgctxt "name"
-msgid "Preview Stage"
-msgstr ""
-
-#: plugins/PerObjectSettingsTool/plugin.json
-msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr ""
-
-#: plugins/PerObjectSettingsTool/plugin.json
-msgctxt "name"
-msgid "Per Model Settings Tool"
+msgid "G-code Profile Reader"
 msgstr ""
 
 #: plugins/GCodeReader/plugin.json
@@ -6404,493 +6884,13 @@ msgctxt "name"
 msgid "G-code Reader"
 msgstr ""
 
-#: plugins/TrimeshReader/plugin.json
+#: plugins/PreviewStage/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
+msgid "Provides a preview stage in Cura."
 msgstr ""
 
-#: plugins/TrimeshReader/plugin.json
+#: plugins/PreviewStage/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr ""
-
-#: plugins/SimulationView/plugin.json
-msgctxt "description"
-msgid "Provides the preview of sliced layerdata."
-msgstr ""
-
-#: plugins/SimulationView/plugin.json
-msgctxt "name"
-msgid "Simulation View"
-msgstr ""
-
-#: plugins/USBPrinting/plugin.json
-msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr ""
-
-#: plugins/USBPrinting/plugin.json
-msgctxt "name"
-msgid "USB printing"
-msgstr ""
-
-#: plugins/SliceInfoPlugin/plugin.json
-msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr ""
-
-#: plugins/SliceInfoPlugin/plugin.json
-msgctxt "name"
-msgid "Slice info"
-msgstr ""
-
-#: plugins/FirmwareUpdater/plugin.json
-msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr ""
-
-#: plugins/FirmwareUpdater/plugin.json
-msgctxt "name"
-msgid "Firmware Updater"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.11 to Cura 4.12."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade411to412/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.11 to 4.12"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade22to24/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 5.2 to Cura 5.3."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade52to53/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 5.2 to 5.3"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade42to43/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade41to42/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade30to31/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade40to41/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade32to33/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade49to410/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade27to30/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade35to40/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade26to27/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade413to50/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.13 to 5.0"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade34to35/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade33to34/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade21to22/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade48to49/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr ""
-
-#: plugins/VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr ""
-
-#: plugins/CuraProfileReader/plugin.json
-msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr ""
-
-#: plugins/CuraProfileReader/plugin.json
-msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr ""
-
-#: plugins/GCodeWriter/plugin.json
-msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr ""
-
-#: plugins/GCodeWriter/plugin.json
-msgctxt "name"
-msgid "G-code Writer"
-msgstr ""
-
-#: plugins/XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr ""
-
-#: plugins/XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr ""
-
-#: plugins/ModelChecker/plugin.json
-msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr ""
-
-#: plugins/ModelChecker/plugin.json
-msgctxt "name"
-msgid "Model Checker"
-msgstr ""
-
-#: plugins/PrepareStage/plugin.json
-msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr ""
-
-#: plugins/PrepareStage/plugin.json
-msgctxt "name"
-msgid "Prepare Stage"
-msgstr ""
-
-#: plugins/Marketplace/plugin.json
-msgctxt "description"
-msgid "Manages extensions to the application and allows browsing extensions from the UltiMaker website."
-msgstr ""
-
-#: plugins/Marketplace/plugin.json
-msgctxt "name"
-msgid "Marketplace"
-msgstr ""
-
-#: plugins/X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr ""
-
-#: plugins/X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr ""
-
-#: plugins/AMFReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr ""
-
-#: plugins/AMFReader/plugin.json
-msgctxt "name"
-msgid "AMF Reader"
-msgstr ""
-
-#: plugins/RemovableDriveOutputDevice/plugin.json
-msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr ""
-
-#: plugins/RemovableDriveOutputDevice/plugin.json
-msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr ""
-
-#: plugins/UFPReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr ""
-
-#: plugins/UFPReader/plugin.json
-msgctxt "name"
-msgid "UFP Reader"
-msgstr ""
-
-#: plugins/ImageReader/plugin.json
-msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr ""
-
-#: plugins/ImageReader/plugin.json
-msgctxt "name"
-msgid "Image Reader"
-msgstr ""
-
-#: plugins/XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr ""
-
-#: plugins/XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr ""
-
-#: plugins/GCodeGzReader/plugin.json
-msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr ""
-
-#: plugins/GCodeGzReader/plugin.json
-msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr ""
-
-#: plugins/LegacyProfileReader/plugin.json
-msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr ""
-
-#: plugins/LegacyProfileReader/plugin.json
-msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr ""
-
-#: plugins/SupportEraser/plugin.json
-msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr ""
-
-#: plugins/SupportEraser/plugin.json
-msgctxt "name"
-msgid "Support Eraser"
-msgstr ""
-
-#: plugins/CuraEngineBackend/plugin.json
-msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr ""
-
-#: plugins/CuraEngineBackend/plugin.json
-msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr ""
-
-#: plugins/UM3NetworkPrinting/plugin.json
-msgctxt "description"
-msgid "Manages network connections to UltiMaker networked printers."
-msgstr ""
-
-#: plugins/UM3NetworkPrinting/plugin.json
-msgctxt "name"
-msgid "UltiMaker Network Connection"
-msgstr ""
-
-#: plugins/FirmwareUpdateChecker/plugin.json
-msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr ""
-
-#: plugins/FirmwareUpdateChecker/plugin.json
-msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr ""
-
-#: plugins/GCodeProfileReader/plugin.json
-msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr ""
-
-#: plugins/GCodeProfileReader/plugin.json
-msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr ""
-
-#: plugins/MonitorStage/plugin.json
-msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr ""
-
-#: plugins/MonitorStage/plugin.json
-msgctxt "name"
-msgid "Monitor Stage"
+msgid "Preview Stage"
 msgstr ""
 
diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po
index 91c7efeedd..f60114ad00 100644
--- a/resources/i18n/de_DE/cura.po
+++ b/resources/i18n/de_DE/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po
index 680c2a4f63..20d4292d38 100644
--- a/resources/i18n/de_DE/fdmprinter.def.json.po
+++ b/resources/i18n/de_DE/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Horizontalloch-Erweiterung"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Drucktemperatur erste Schicht"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Skirt-Abstand"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Drucktemperatur für kleine Schichten"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Bei kleinen Details wird die Geschwindigkeit auf diesen Prozentsatz der normalen Druckgeschwindigkeit gesetzt. Durch eine niedrigere Druckgeschwindigkeit können die Haftung und die Genauigkeit verbessert werden."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Oberflächenenergie."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Bei Werten größer als Null verwenden die Combing-Fahrbewegungen, die weiter als über diese Distanz erfolgen, die Einzugsfunktion. Beim Wert Null gibt es keine Maximalstellung, und die Combing-Fahrbewegungen verwenden die Einzugsfunktion nicht."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/es_ES/cura.po b/resources/i18n/es_ES/cura.po
index faca2c1e9c..2c362b6c72 100644
--- a/resources/i18n/es_ES/cura.po
+++ b/resources/i18n/es_ES/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.3\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po
index 8753cc4765..879c4daffe 100644
--- a/resources/i18n/es_ES/fdmprinter.def.json.po
+++ b/resources/i18n/es_ES/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Expansión horizontal de orificios"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Temperatura de impresión de la capa inicial"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Distancia de falda"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Temperatura de impresión para capas pequeñas"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Las pequeñas partes se imprimirán a este porcentaje de su velocidad de impresión normal. Una impresión más lenta puede mejorar la adhesión y la precisión."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Energía de la superficie."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Si es mayor que cero, los movimientos de desplazamiento de peinada que sean superiores a esta distancia utilizarán retracción. Si se establece como cero, no hay un máximo y los movimientos de peinada no utilizarán la retracción."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot
index 10fe46940a..c5d9522761 100644
--- a/resources/i18n/fdmprinter.def.json.pot
+++ b/resources/i18n/fdmprinter.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1161,6 +1161,16 @@ msgctxt "hole_xy_offset description"
 msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_type label"
 msgid "Z Seam Alignment"
@@ -1541,6 +1551,16 @@ msgctxt "skin_angles description"
 msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
@@ -4696,6 +4716,16 @@ msgctxt "skirt_line_count description"
 msgid "Multiple skirt lines help to prime your extrusion better for small models. Setting this to 0 will disable the skirt."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_gap label"
 msgid "Skirt Distance"
@@ -4776,6 +4806,16 @@ msgctxt "brim_inside_margin description"
 msgid "A part fully enclosed inside another part can generate an outer brim that touches the inside of the other part. This removes all brim within this distance from internal holes."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "raft_margin label"
 msgid "Raft Extra Margin"
diff --git a/resources/i18n/fi_FI/cura.po b/resources/i18n/fi_FI/cura.po
index fa71bcd877..a7bf584b37 100644
--- a/resources/i18n/fi_FI/cura.po
+++ b/resources/i18n/fi_FI/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: 2022-07-15 10:53+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
diff --git a/resources/i18n/fi_FI/fdmprinter.def.json.po b/resources/i18n/fi_FI/fdmprinter.def.json.po
index 34c7fed8e3..f547dac4b1 100644
--- a/resources/i18n/fi_FI/fdmprinter.def.json.po
+++ b/resources/i18n/fi_FI/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: 2022-07-15 11:17+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -1636,6 +1636,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3176,6 +3181,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Alkukerroksen tulostuslämpötila"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3661,6 +3671,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Helman etäisyys"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3732,6 +3747,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Tulostuslämpötila lopussa"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3742,6 +3762,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4270,6 +4300,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6309,6 +6344,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po
index 1bdd46cd7a..0632faaf57 100644
--- a/resources/i18n/fr_FR/cura.po
+++ b/resources/i18n/fr_FR/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po
index 6a5ebd4969..99cd70d2b9 100644
--- a/resources/i18n/fr_FR/fdmprinter.def.json.po
+++ b/resources/i18n/fr_FR/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Expansion horizontale des trous"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Température d’impression couche initiale"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Distance de la jupe"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Température d'impression pour couches fines"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Les petites structures seront imprimées à ce pourcentage de la vitesse d'impression normale. Une impression plus lente peut aider à l'adhésion et à la précision."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Énergie de la surface."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Lorsque cette distance est supérieure à zéro, les déplacements de détour qui sont plus longs que cette distance utiliseront la rétraction. Si elle est définie sur zéro, il n'y a pas de maximum et les mouvements de détour n'utiliseront pas la rétraction."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/hu_HU/cura.po b/resources/i18n/hu_HU/cura.po
index c4ab3f2a98..b4028626c3 100644
--- a/resources/i18n/hu_HU/cura.po
+++ b/resources/i18n/hu_HU/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: 2020-03-24 09:36+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: ATI-SZOFT\n"
diff --git a/resources/i18n/hu_HU/fdmprinter.def.json.po b/resources/i18n/hu_HU/fdmprinter.def.json.po
index 3d2db46bd4..8fb18340ca 100644
--- a/resources/i18n/hu_HU/fdmprinter.def.json.po
+++ b/resources/i18n/hu_HU/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: 2020-03-24 09:43+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
@@ -1641,6 +1641,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3181,6 +3186,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Kezdő réteg nyomtatási hőmérséklete"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3666,6 +3676,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Szoknya távolság"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3737,6 +3752,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Befejező nyomtatási hőmérséklet"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3747,6 +3767,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4275,6 +4305,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Felületi energia."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6319,6 +6354,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/it_IT/cura.po b/resources/i18n/it_IT/cura.po
index 0b5aa3b845..9ac7edd0a7 100644
--- a/resources/i18n/it_IT/cura.po
+++ b/resources/i18n/it_IT/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po
index 887a300445..08b8fa42b8 100644
--- a/resources/i18n/it_IT/fdmprinter.def.json.po
+++ b/resources/i18n/it_IT/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Espansione orizzontale dei fori"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Temperatura di stampa Strato iniziale"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Distanza dello skirt"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Temperatura di stampa per piccoli strati"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "I dettagli di piccole dimensioni verranno stampati a questa percentuale della velocità di stampa normale. Una stampa più lenta può aiutare in termini di adesione e precisione."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Energia superficiale."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Per un valore superiore a zero, le corse di spostamento in modalità combing superiori a tale distanza utilizzeranno la retrazione. Se il valore impostato è zero, non è presente un valore massimo e le corse in modalità combing non utilizzeranno la retrazione."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/ja_JP/cura.po b/resources/i18n/ja_JP/cura.po
index 37a0badeb5..e57a007df8 100644
--- a/resources/i18n/ja_JP/cura.po
+++ b/resources/i18n/ja_JP/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/ja_JP/fdmprinter.def.json.po b/resources/i18n/ja_JP/fdmprinter.def.json.po
index 2e1310d216..771d02f4bd 100644
--- a/resources/i18n/ja_JP/fdmprinter.def.json.po
+++ b/resources/i18n/ja_JP/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1636,6 +1636,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "穴の水平展開"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "初期レイヤー印刷温度"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "スカート距離"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "最終印刷温度"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "小型形体は通常のプリント速度に対してこの割合でプリントされます。低速でプリントすると、接着と精度が向上します。"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "表面エネルギー。"
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6309,6 +6344,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "ゼロを超える場合、この距離より長い移動量をコーミングすると、引き戻しが使用されます。ゼロに設定した場合、最大値はなく、コーミング移動では引き戻しを使用しません。"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/ko_KR/cura.po b/resources/i18n/ko_KR/cura.po
index d7a4d74fa5..d1f6387af8 100644
--- a/resources/i18n/ko_KR/cura.po
+++ b/resources/i18n/ko_KR/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/ko_KR/fdmprinter.def.json.po b/resources/i18n/ko_KR/fdmprinter.def.json.po
index f6c25c4ea7..11e46febc8 100644
--- a/resources/i18n/ko_KR/fdmprinter.def.json.po
+++ b/resources/i18n/ko_KR/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1636,6 +1636,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "구멍 수평 확장"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3176,6 +3181,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "첫번째 레이어의 프린팅 온도"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3661,6 +3671,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "스커트 거리"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3731,6 +3746,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "소형 레이어 프린팅 온도"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3741,6 +3761,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "소형 피처는 정상적인 프린트 속도의 이 비율로 프린팅됩니다. 프린트 속도가 느리면 부착과 정확도가 개선됩니다."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4266,6 +4296,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "표면의 에너지입니다."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6305,6 +6340,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "0보다 큰 경우 이 거리보다 긴 combing travel은 retraction을 사용합니다. 0으로 설정한 경우 최댓값이 없으며 combing travel은 retraction을 사용하지 않습니다."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po
index 2bbcd86425..1ab7f92e7f 100644
--- a/resources/i18n/nl_NL/cura.po
+++ b/resources/i18n/nl_NL/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po
index f8cb910869..0ab8b3fd58 100644
--- a/resources/i18n/nl_NL/fdmprinter.def.json.po
+++ b/resources/i18n/nl_NL/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Horizontale uitbreiding gaten"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Printtemperatuur van de eerste laag"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Skirtafstand"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "De printtemperatuur van kleine lagens"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Kleine kernmerken worden geprint met een snelheid die gelijk is aan dit percentage van hun normale printsnelheid. Langzamer printen kan de hechting en nauwkeurigheid verbeteren."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Oppervlakte-energie."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Wanneer dit groter dan nul is, vindt bij een combing-beweging die langer is dan deze afstand, intrekking plaats. Wanneer dit nul is, is er geen maximum en vindt bij combing-bewegingen geen intrekking plaats."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/pl_PL/cura.po b/resources/i18n/pl_PL/cura.po
index ee6d911c0f..c9a255a613 100644
--- a/resources/i18n/pl_PL/cura.po
+++ b/resources/i18n/pl_PL/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: 2021-09-07 08:02+0200\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
diff --git a/resources/i18n/pl_PL/fdmprinter.def.json.po b/resources/i18n/pl_PL/fdmprinter.def.json.po
index 6f7b9514b8..36fc0e9ac5 100644
--- a/resources/i18n/pl_PL/fdmprinter.def.json.po
+++ b/resources/i18n/pl_PL/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: 2019-11-15 15:34+0100\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@@ -1642,6 +1642,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3182,6 +3187,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Temp. Druku Początk. Warstwy"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3667,6 +3677,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Odległ. Obwódki"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3738,6 +3753,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Końcowa Temp. Druku"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3748,6 +3768,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Małe obiekty zostaną wydrukowane z zadanym procentem ich normalnej prędkości drukowania. Wolniejsze drukowanie może poprawić przyczepność i dokładność."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4276,6 +4306,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Energia powierzchni."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6320,6 +6355,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr ""
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/pt_BR/cura.po b/resources/i18n/pt_BR/cura.po
index 18f9df3c5f..f71ac98696 100644
--- a/resources/i18n/pt_BR/cura.po
+++ b/resources/i18n/pt_BR/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.0\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: 2023-02-17 17:37+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po
index b13c2bb74e..2e3a7ac249 100644
--- a/resources/i18n/pt_BR/fdmprinter.def.json.po
+++ b/resources/i18n/pt_BR/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.0\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: 2023-02-17 16:31+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
@@ -1643,6 +1643,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Expansão Horizontal do Furo"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3183,6 +3188,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Temperatura de Impressão da Camada Inicial"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3668,6 +3678,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Distância do Skirt"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3739,6 +3754,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Temperatura de Impressão Final"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3749,6 +3769,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Aspectos pequenos serão impressos nessa porcentagem da velocidade normal. Impressão mais lenta pode ajudar com aderência e precisão."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4277,6 +4307,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Energia de superfície."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6321,6 +6356,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Quando maior que zero, os movimentos de percurso de combing que forem maiores que essa distância usarão retração. Se deixado em zero, não haverá máximo e os movimentos de combing não usarão retração."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/pt_PT/cura.po b/resources/i18n/pt_PT/cura.po
index 4a8b6ad2cf..d784c27fb7 100644
--- a/resources/i18n/pt_PT/cura.po
+++ b/resources/i18n/pt_PT/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/pt_PT/fdmprinter.def.json.po b/resources/i18n/pt_PT/fdmprinter.def.json.po
index d641ee1184..36c99e1bee 100644
--- a/resources/i18n/pt_PT/fdmprinter.def.json.po
+++ b/resources/i18n/pt_PT/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Expansão horizontal de buraco"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Temperatura Impressão Camada Inicial"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Distância Contorno"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Temperatura de impressão de camada pequena"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Os elementos pequenos serão impressos a esta percentagem da respetiva velocidade de impressão normal. Uma impressão mais lenta pode ajudar em termos de aderência e precisão."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Energia da superfície."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Os movimentos de deslocação de Combing com uma distância maior que este valor, quando este é superior a zero, utilizam retrações. Se o valor for definido como zero, não existirá qualquer valor máximo e os movimentos Combing não utilizarão retrações."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/ru_RU/cura.po b/resources/i18n/ru_RU/cura.po
index 950ad3354b..394a1977f3 100644
--- a/resources/i18n/ru_RU/cura.po
+++ b/resources/i18n/ru_RU/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/ru_RU/fdmprinter.def.json.po b/resources/i18n/ru_RU/fdmprinter.def.json.po
index f6a01d2c95..169355a106 100644
--- a/resources/i18n/ru_RU/fdmprinter.def.json.po
+++ b/resources/i18n/ru_RU/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Горизонтальное расширение отверстия"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "Температура печати первого слоя"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Дистанция до юбки"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Температура малослойной печати"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Малые элементы будут напечатаны со скоростью, составляющей этот процент от их нормальной скорости печати. Более медленная печать может улучшить адгезию и точность."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Поверхностная энергия."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "При значении параметра выше нуля перемещения комбинга, превышающие заданное расстояние, будут выполняться с откатом. Когда значение параметра равно нулю, то максимума нет и перемещения комбинга выполняются без отката."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/tr_TR/cura.po b/resources/i18n/tr_TR/cura.po
index eac9143d55..652a9e788b 100644
--- a/resources/i18n/tr_TR/cura.po
+++ b/resources/i18n/tr_TR/cura.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po
index 2ebda91de1..58b7edb199 100644
--- a/resources/i18n/tr_TR/fdmprinter.def.json.po
+++ b/resources/i18n/tr_TR/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "Delik Yatay Büyüme"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "İlk Katman Yazdırma Sıcaklığı"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Etek Mesafesi"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "Küçük Katmanlı Baskı Sıcaklığı"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "Küçük özellikler normal baskı hızının bu yüzdesinde basılacaktır. Daha yavaş baskı, yapışma ve doğruluğu artırmaya yardımcı olabilir."
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "Yüzey enerjisi."
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "Sıfırdan büyük olduğunda, bu mesafeden daha uzun tarama mesafelerinde geri çekme yapılır. Sıfıra ayarlandığında, bir maksimum belirlenmez ve tarama hareketlerinde geri çekme kullanılmaz."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/zh_CN/cura.po b/resources/i18n/zh_CN/cura.po
index a9cd96de41..d0e21a9757 100644
--- a/resources/i18n/zh_CN/cura.po
+++ b/resources/i18n/zh_CN/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: 2022-07-15 11:06+0200\n"
 "Last-Translator: \n"
 "Language-Team: \n"
diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po
index 725d488792..c15a4d0289 100644
--- a/resources/i18n/zh_CN/fdmprinter.def.json.po
+++ b/resources/i18n/zh_CN/fdmprinter.def.json.po
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -1638,6 +1638,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "孔洞水平扩展"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3178,6 +3183,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "打印温度起始层"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3663,6 +3673,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "Skirt 距离"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3733,6 +3748,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "小型层打印温度"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3743,6 +3763,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "微小特征将按正常打印速度的百分比进行打印。缓慢打印有助于粘合和提高准确性。"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4268,6 +4298,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "表面能。"
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6307,6 +6342,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "当大于零时，比这段距离更长的梳理空驶将会使用回抽。如果设置为零，则没有最大值，梳理空驶将不会使用回抽。"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/i18n/zh_TW/cura.po b/resources/i18n/zh_TW/cura.po
index d0cd596634..cd3ac9494e 100644
--- a/resources/i18n/zh_TW/cura.po
+++ b/resources/i18n/zh_TW/cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-03-09 11:03+0000\n"
+"POT-Creation-Date: 2023-03-15 11:58+0000\n"
 "PO-Revision-Date: 2022-01-02 19:59+0800\n"
 "Last-Translator: Valen Chang  <carf17771@gmail.com>\n"
 "Language-Team: Valen Chang <carf17771@gmail.com>\n"
diff --git a/resources/i18n/zh_TW/fdmprinter.def.json.po b/resources/i18n/zh_TW/fdmprinter.def.json.po
index b92ec08996..148a9c0ce6 100644
--- a/resources/i18n/zh_TW/fdmprinter.def.json.po
+++ b/resources/i18n/zh_TW/fdmprinter.def.json.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 5.1\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2023-03-08 09:03+0000\n"
+"POT-Creation-Date: 2023-03-21 13:32+0000\n"
 "PO-Revision-Date: 2022-01-02 20:24+0800\n"
 "Last-Translator: Valen Chang  <carf17771@gmail.com>\n"
 "Language-Team: Valen Chang <carf17771@gmail.com>\n"
@@ -1643,6 +1643,11 @@ msgctxt "hole_xy_offset label"
 msgid "Hole Horizontal Expansion"
 msgstr "孔洞水平擴展"
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter label"
+msgid "Hole Horizontal Expansion Max Diameter"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_hole_max_size description"
 msgid "Holes and part outlines with a diameter smaller than this will be printed using Small Feature Speed."
@@ -3183,6 +3188,11 @@ msgctxt "material_print_temperature_layer_0 label"
 msgid "Printing Temperature Initial Layer"
 msgstr "列印溫度起始層"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height description"
+msgid "Printing the innermost skirt line with multiple layers makes it easy to remove the skirt."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_extra_perimeter description"
 msgid "Prints an extra wall at every other layer. This way infill gets caught between these extra walls, resulting in stronger prints."
@@ -3668,6 +3678,11 @@ msgctxt "skirt_gap label"
 msgid "Skirt Distance"
 msgstr "外圍間距"
 
+#: fdmprinter.def.json
+msgctxt "skirt_height label"
+msgid "Skirt Height"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "skirt_line_count label"
 msgid "Skirt Line Count"
@@ -3739,6 +3754,11 @@ msgctxt "cool_min_temperature label"
 msgid "Small Layer Printing Temperature"
 msgstr "最終列印溫度"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width label"
+msgid "Small Top/Bottom Width"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "small_feature_speed_factor_0 description"
 msgid "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
@@ -3749,6 +3769,16 @@ msgctxt "small_feature_speed_factor description"
 msgid "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy."
 msgstr "細部模式將以正常列印速度的此百分比值列印。 較慢的列印有助於黏合和精度。"
 
+#: fdmprinter.def.json
+msgctxt "small_skin_width description"
+msgid "Small top/bottom regions are filled with walls instead of the default top/bottom pattern. This helps to avoids jerky motions."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering label"
+msgid "Smart Brim"
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "z_seam_corner option z_seam_corner_weighted"
 msgid "Smart Hiding"
@@ -4277,6 +4307,11 @@ msgctxt "material_surface_energy description"
 msgid "Surface energy."
 msgstr "表面能量。"
 
+#: fdmprinter.def.json
+msgctxt "brim_smart_ordering description"
+msgid "Swap print order of the innermost and second innermost brim lines. This improves brim removal."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "alternate_carve_order description"
 msgid "Switch to which mesh intersecting volumes will belong with every layer, so that the overlapping meshes become interwoven. Turning this setting off will cause one of the meshes to obtain all of the volume in the overlap, while it is removed from the other meshes."
@@ -6321,6 +6356,11 @@ msgctxt "retraction_combing_max_distance description"
 msgid "When greater than zero, combing travel moves that are longer than this distance will use retraction. If set to zero, there is no maximum and combing moves will not use retraction."
 msgstr "觸發回抽時之最小距離，如大於此數值，便開啟回抽；如設置為0，則關閉回抽."
 
+#: fdmprinter.def.json
+msgctxt "hole_xy_offset_max_diameter description"
+msgid "When greater than zero, the Hole Horizontal Expansion is gradually applied on small holes (small holes are expanded more). When set to zero the Hole Horizontal Expansion will be applied to all holes. Holes larger than the Hole Horizontal Expansion Max Diameter are not expanded."
+msgstr ""
+
 #: fdmprinter.def.json
 msgctxt "bridge_skin_material_flow description"
 msgid "When printing bridge skin regions, the amount of material extruded is multiplied by this value."
diff --git a/resources/images/Hellbot_Magna_SE_300.png b/resources/images/Hellbot_Magna_SE_300.png
new file mode 100644
index 0000000000..be8a8d2e6b
Binary files /dev/null and b/resources/images/Hellbot_Magna_SE_300.png differ
diff --git a/resources/images/Hellbot_magna_SE_Pro.png b/resources/images/Hellbot_magna_SE_Pro.png
new file mode 100644
index 0000000000..48a1bc463f
Binary files /dev/null and b/resources/images/Hellbot_magna_SE_Pro.png differ
diff --git a/resources/meshes/Hellbot_Magna_SE_300.obj b/resources/meshes/Hellbot_Magna_SE_300.obj
new file mode 100644
index 0000000000..ab9fcc1f30
--- /dev/null
+++ b/resources/meshes/Hellbot_Magna_SE_300.obj
@@ -0,0 +1,616 @@
+# Exported from 3D Builder
+mtllib Hellbot_Magna_SE_300.mtl
+
+o Object.1
+v -155.000000 -150.000015 2.000102 188 188 188
+v -154.938446 -150.782181 0.000102 188 188 188
+v -154.938446 -150.782181 2.000102 188 188 188
+v -154.755280 -151.545090 0.000103 188 188 188
+v -152.938919 -154.045090 2.000104 188 188 188
+v -152.269958 -154.455063 0.000105 188 188 188
+v -151.545090 -154.755325 0.000105 188 188 188
+v -150.782166 -154.938431 0.000105 188 188 188
+v -150.782166 -154.938431 2.000105 188 188 188
+v -150.000000 -155.000015 0.000105 188 188 188
+v 151.545074 -154.755325 0.000105 188 188 188
+v 151.545074 -154.755325 2.000105 188 188 188
+v 152.269958 -154.455063 0.000105 188 188 188
+v 152.938934 -154.045090 0.000104 188 188 188
+v 152.269958 -154.455063 2.000105 188 188 188
+v 152.938934 -154.045090 2.000104 188 188 188
+v 154.045074 -152.938950 0.000104 188 188 188
+v 154.045074 -152.938950 2.000104 188 188 188
+v 154.455048 -152.269974 0.000103 188 188 188
+v 154.455048 -152.269974 2.000103 188 188 188
+v 154.755310 -151.545090 0.000103 188 188 188
+v 154.938416 150.782181 -0.000102 188 188 188
+v 154.755310 151.545105 1.999897 188 188 188
+v 154.455048 152.269974 1.999897 188 188 188
+v 154.045074 152.938934 -0.000104 188 188 188
+v 154.045074 152.938950 1.999897 188 188 188
+v 153.535553 153.535553 -0.000104 188 188 188
+v 152.938934 154.045105 -0.000104 188 188 188
+v 152.938934 154.045105 1.999896 188 188 188
+v 152.269958 154.455048 1.999896 188 188 188
+v 151.545074 154.755295 1.999895 188 188 188
+v 150.000000 155.000015 -0.000105 188 188 188
+v 150.000000 155.000015 1.999895 188 188 188
+v -150.782166 154.938461 -0.000105 188 188 188
+v -150.782166 154.938461 1.999895 188 188 188
+v -152.269958 154.455048 -0.000105 188 188 188
+v -152.938919 154.045105 1.999896 188 188 188
+v -153.535538 153.535553 1.999896 188 188 188
+v -153.535538 153.535553 -0.000104 188 188 188
+v -154.755280 151.545105 -0.000103 188 188 188
+v -154.755280 151.545105 1.999897 188 188 188
+v -154.938446 150.782181 -0.000102 188 188 188
+v -155.000000 150.000015 1.999898 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v 150.000000 -155.000015 2.000105 188 188 188
+v 150.782166 -154.938431 2.000105 188 188 188
+v -150.000000 155.000015 1.999895 188 188 188
+v -152.269958 -154.455063 2.000105 188 188 188
+v -151.545090 -154.755325 2.000105 188 188 188
+v -150.000000 -155.000015 2.000105 188 188 188
+v 153.535553 -153.535568 2.000104 188 188 188
+v 154.755310 -151.545090 2.000103 188 188 188
+v 154.938416 -150.782181 2.000102 188 188 188
+v 155.000000 -150.000015 2.000102 188 188 188
+v 154.938416 150.782196 1.999898 188 188 188
+v 153.535553 153.535553 1.999896 188 188 188
+v 155.000000 150.000015 1.999898 188 188 188
+v 150.782166 154.938461 1.999895 188 188 188
+v -151.545090 154.755295 1.999895 188 188 188
+v -152.269958 154.455048 1.999896 188 188 188
+v -153.535538 -153.535568 2.000104 188 188 188
+v -154.045090 152.938950 1.999897 188 188 188
+v -154.755280 -151.545090 2.000103 188 188 188
+v -154.455032 -152.269974 2.000103 188 188 188
+v -154.045090 -152.938950 2.000104 188 188 188
+v -154.455032 152.269974 1.999897 188 188 188
+v -154.938446 150.782196 1.999898 188 188 188
+v 153.535553 -153.535568 0.000104 188 188 188
+v 155.000000 -150.000015 0.000102 188 188 188
+v 154.938416 -150.782181 0.000102 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 150.782166 -154.938431 0.000105 188 188 188
+v -151.545090 154.755295 -0.000105 188 188 188
+v -150.000000 155.000015 -0.000105 188 188 188
+v 150.782166 154.938461 -0.000105 188 188 188
+v -152.938919 -154.045090 0.000104 188 188 188
+v -153.535538 -153.535568 0.000104 188 188 188
+v -154.455032 152.269974 -0.000103 188 188 188
+v -154.045090 152.938934 -0.000104 188 188 188
+v -154.045090 -152.938950 0.000104 188 188 188
+v -154.455032 -152.269974 0.000103 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v 151.545074 154.755295 -0.000105 188 188 188
+v 152.269958 154.455048 -0.000105 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 154.455048 152.269974 -0.000103 188 188 188
+v 154.755310 151.545105 -0.000103 188 188 188
+
+v -155.000000 -150.000015 2.000102 188 188 188
+v -154.938446 -150.782181 0.000102 188 188 188
+v 155.000000 -150.000015 2.000102 188 188 188
+v 155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v 155.000000 -150.000015 0.000102 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -150.000000 -155.000015 0.000105 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -150.782166 -154.938431 0.000105 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -151.545090 -154.755325 0.000105 188 188 188
+v -152.269958 -154.455063 0.000105 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -152.938919 -154.045090 0.000104 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -153.535538 -153.535568 0.000104 188 188 188
+v -154.045090 -152.938950 0.000104 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -154.455032 -152.269974 0.000103 188 188 188
+v -154.755280 -151.545090 0.000103 188 188 188
+v -154.455032 -152.269974 0.000103 188 188 188
+v -154.455032 -152.269974 0.000103 188 188 188
+v -154.045090 -152.938950 0.000104 188 188 188
+v -154.045090 -152.938950 0.000104 188 188 188
+v -153.535538 -153.535568 0.000104 188 188 188
+v -153.535538 -153.535568 0.000104 188 188 188
+v -152.938919 -154.045090 0.000104 188 188 188
+v -152.938919 -154.045090 0.000104 188 188 188
+v -152.269958 -154.455063 0.000105 188 188 188
+v -152.269958 -154.455063 0.000105 188 188 188
+v -151.545090 -154.755325 0.000105 188 188 188
+v -151.545090 -154.755325 0.000105 188 188 188
+v -150.782166 -154.938431 0.000105 188 188 188
+v -150.782166 -154.938431 0.000105 188 188 188
+v -150.000000 -155.000015 0.000105 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v -150.000000 -155.000015 0.000105 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 155.000000 -150.000015 0.000102 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 154.938416 -150.782181 0.000102 188 188 188
+v 154.755310 -151.545090 0.000103 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 154.455048 -152.269974 0.000103 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 154.045074 -152.938950 0.000104 188 188 188
+v 153.535553 -153.535568 0.000104 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 152.938934 -154.045090 0.000104 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v 150.782166 -154.938431 0.000105 188 188 188
+v 152.938934 -154.045090 0.000104 188 188 188
+v 150.782166 -154.938431 0.000105 188 188 188
+v 150.782166 -154.938431 0.000105 188 188 188
+v 151.545074 -154.755325 0.000105 188 188 188
+v 151.545074 -154.755325 0.000105 188 188 188
+v 152.938934 -154.045090 0.000104 188 188 188
+v 152.269958 -154.455063 0.000105 188 188 188
+v 152.938934 -154.045090 0.000104 188 188 188
+v 151.545074 -154.755325 0.000105 188 188 188
+v 152.269958 -154.455063 0.000105 188 188 188
+v 152.938934 -154.045090 0.000104 188 188 188
+v 153.535553 -153.535568 0.000104 188 188 188
+v 153.535553 -153.535568 0.000104 188 188 188
+v 154.045074 -152.938950 0.000104 188 188 188
+v 154.045074 -152.938950 0.000104 188 188 188
+v 154.455048 -152.269974 0.000103 188 188 188
+v 154.045074 -152.938950 2.000104 188 188 188
+v 154.455048 -152.269974 0.000103 188 188 188
+v 154.455048 -152.269974 2.000103 188 188 188
+v 154.755310 -151.545090 0.000103 188 188 188
+v 154.455048 -152.269974 2.000103 188 188 188
+v 154.455048 -152.269974 0.000103 188 188 188
+v 154.755310 -151.545090 0.000103 188 188 188
+v 154.755310 -151.545090 2.000103 188 188 188
+v 154.755310 -151.545090 0.000103 188 188 188
+v 154.938416 -150.782181 0.000102 188 188 188
+v 154.755310 -151.545090 2.000103 188 188 188
+v 154.938416 -150.782181 0.000102 188 188 188
+v 154.938416 -150.782181 2.000102 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -155.000000 150.000015 1.999898 188 188 188
+v -152.938919 154.045105 1.999896 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -152.938919 154.045105 1.999896 188 188 188
+v -153.535538 153.535553 -0.000104 188 188 188
+v -153.535538 153.535553 1.999896 188 188 188
+v -154.045090 152.938950 1.999897 188 188 188
+v -154.045090 152.938934 -0.000104 188 188 188
+v -154.045090 152.938950 1.999897 188 188 188
+v -154.455032 152.269974 -0.000103 188 188 188
+v -154.455032 152.269974 1.999897 188 188 188
+v -154.455032 152.269974 -0.000103 188 188 188
+v -154.455032 152.269974 1.999897 188 188 188
+v -154.755280 151.545105 -0.000103 188 188 188
+v -154.755280 151.545105 1.999897 188 188 188
+v -154.755280 151.545105 -0.000103 188 188 188
+v -154.755280 151.545105 1.999897 188 188 188
+v -154.938446 150.782181 -0.000102 188 188 188
+v -154.938446 150.782196 1.999898 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -154.938446 150.782181 -0.000102 188 188 188
+v -154.755280 151.545105 -0.000103 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -154.938446 150.782181 -0.000102 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -152.269958 154.455048 -0.000105 188 188 188
+v -151.545090 154.755295 -0.000105 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -150.782166 154.938461 -0.000105 188 188 188
+v -150.000000 155.000015 -0.000105 188 188 188
+v -150.782166 154.938461 -0.000105 188 188 188
+v -150.000000 155.000015 1.999895 188 188 188
+v -150.782166 154.938461 -0.000105 188 188 188
+v -150.782166 154.938461 1.999895 188 188 188
+v -151.545090 154.755295 -0.000105 188 188 188
+v 150.782166 154.938461 1.999895 188 188 188
+v 150.782166 154.938461 -0.000105 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 150.000000 155.000015 -0.000105 188 188 188
+v 150.782166 154.938461 -0.000105 188 188 188
+v 150.782166 154.938461 -0.000105 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 151.545074 154.755295 -0.000105 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 152.269958 154.455048 -0.000105 188 188 188
+v 152.938934 154.045105 -0.000104 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 153.535553 153.535553 -0.000104 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 154.045074 152.938934 -0.000104 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 154.938416 150.782181 -0.000102 188 188 188
+v 155.000000 150.000015 1.999898 188 188 188
+v 154.938416 150.782181 -0.000102 188 188 188
+v 152.269958 154.455048 -0.000105 188 188 188
+v 152.938934 154.045105 -0.000104 188 188 188
+v 152.938934 154.045105 1.999896 188 188 188
+v 153.535553 153.535553 -0.000104 188 188 188
+v 153.535553 153.535553 1.999896 188 188 188
+v 154.045074 152.938934 -0.000104 188 188 188
+v 154.045074 152.938950 1.999897 188 188 188
+v 154.455048 152.269974 1.999897 188 188 188
+v 154.045074 152.938934 -0.000104 188 188 188
+v 154.455048 152.269974 -0.000103 188 188 188
+v 154.455048 152.269974 1.999897 188 188 188
+v 154.755310 151.545105 1.999897 188 188 188
+v 154.455048 152.269974 -0.000103 188 188 188
+v 154.938416 150.782181 -0.000102 188 188 188
+v 154.455048 152.269974 -0.000103 188 188 188
+v 154.755310 151.545105 -0.000103 188 188 188
+v 154.938416 150.782196 1.999898 188 188 188
+v 154.755310 151.545105 -0.000103 188 188 188
+v 154.755310 151.545105 1.999897 188 188 188
+v 154.938416 150.782196 1.999898 188 188 188
+v 154.938416 150.782181 -0.000102 188 188 188
+v 154.755310 151.545105 -0.000103 188 188 188
+v 154.938416 150.782181 -0.000102 188 188 188
+v 154.045074 152.938934 -0.000104 188 188 188
+v 154.455048 152.269974 -0.000103 188 188 188
+v 154.045074 152.938950 1.999897 188 188 188
+v 154.045074 152.938934 -0.000104 188 188 188
+v 153.535553 153.535553 -0.000104 188 188 188
+v 153.535553 153.535553 1.999896 188 188 188
+v 153.535553 153.535553 -0.000104 188 188 188
+v 152.938934 154.045105 -0.000104 188 188 188
+v 152.938934 154.045105 1.999896 188 188 188
+v 152.938934 154.045105 -0.000104 188 188 188
+v 152.269958 154.455048 -0.000105 188 188 188
+v 152.269958 154.455048 1.999896 188 188 188
+v 152.269958 154.455048 -0.000105 188 188 188
+v 151.545074 154.755295 -0.000105 188 188 188
+v 152.269958 154.455048 1.999896 188 188 188
+v 151.545074 154.755295 -0.000105 188 188 188
+v 151.545074 154.755295 1.999895 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v -150.000000 155.000015 -0.000105 188 188 188
+v 150.000000 155.000015 -0.000105 188 188 188
+v -150.000000 155.000015 -0.000105 188 188 188
+v 150.000000 155.000015 -0.000105 188 188 188
+v 151.545074 154.755295 1.999895 188 188 188
+v 151.545074 154.755295 -0.000105 188 188 188
+v 150.782166 154.938461 -0.000105 188 188 188
+v 150.782166 154.938461 1.999895 188 188 188
+v 150.000000 155.000015 -0.000105 188 188 188
+v 150.000000 155.000015 1.999895 188 188 188
+v -150.000000 155.000015 1.999895 188 188 188
+v 150.000000 155.000015 1.999895 188 188 188
+v -150.000000 155.000015 -0.000105 188 188 188
+v -150.782166 154.938461 1.999895 188 188 188
+v -150.782166 154.938461 -0.000105 188 188 188
+v -151.545090 154.755295 -0.000105 188 188 188
+v -151.545090 154.755295 1.999895 188 188 188
+v -151.545090 154.755295 -0.000105 188 188 188
+v -152.269958 154.455048 -0.000105 188 188 188
+v -151.545090 154.755295 1.999895 188 188 188
+v -152.269958 154.455048 -0.000105 188 188 188
+v -152.269958 154.455048 1.999896 188 188 188
+v -154.755280 151.545105 -0.000103 188 188 188
+v -154.455032 152.269974 -0.000103 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -154.455032 152.269974 -0.000103 188 188 188
+v -154.045090 152.938934 -0.000104 188 188 188
+v -153.535538 153.535553 1.999896 188 188 188
+v -153.535538 153.535553 -0.000104 188 188 188
+v -154.045090 152.938934 -0.000104 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -154.045090 152.938934 -0.000104 188 188 188
+v -153.535538 153.535553 -0.000104 188 188 188
+v -152.269958 154.455048 1.999896 188 188 188
+v -152.269958 154.455048 -0.000105 188 188 188
+v -152.938919 154.045105 -0.000104 188 188 188
+v -154.938446 150.782196 1.999898 188 188 188
+v -154.938446 150.782181 -0.000102 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -155.000000 150.000015 -0.000102 188 188 188
+v -150.000000 155.000015 -0.000105 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 155.000000 150.000015 1.999898 188 188 188
+v 155.000000 -150.000015 2.000102 188 188 188
+v 155.000000 150.000015 -0.000102 188 188 188
+v 154.938416 -150.782181 2.000102 188 188 188
+v 154.938416 -150.782181 0.000102 188 188 188
+v 155.000000 -150.000015 0.000102 188 188 188
+v 153.535553 -153.535568 2.000104 188 188 188
+v 154.045074 -152.938950 0.000104 188 188 188
+v 154.045074 -152.938950 2.000104 188 188 188
+v 152.938934 -154.045090 2.000104 188 188 188
+v 153.535553 -153.535568 0.000104 188 188 188
+v 153.535553 -153.535568 2.000104 188 188 188
+v 152.269958 -154.455063 2.000105 188 188 188
+v 152.938934 -154.045090 0.000104 188 188 188
+v 152.938934 -154.045090 2.000104 188 188 188
+v 151.545074 -154.755325 2.000105 188 188 188
+v 152.269958 -154.455063 0.000105 188 188 188
+v 152.269958 -154.455063 2.000105 188 188 188
+v 150.782166 -154.938431 2.000105 188 188 188
+v 151.545074 -154.755325 0.000105 188 188 188
+v 151.545074 -154.755325 2.000105 188 188 188
+v 150.000000 -155.000015 2.000105 188 188 188
+v 150.782166 -154.938431 0.000105 188 188 188
+v 150.782166 -154.938431 2.000105 188 188 188
+v 150.000000 -155.000015 2.000105 188 188 188
+v -150.000000 -155.000015 2.000105 188 188 188
+v 150.000000 -155.000015 0.000105 188 188 188
+v -150.782166 -154.938431 2.000105 188 188 188
+v -150.000000 -155.000015 0.000105 188 188 188
+v -150.000000 -155.000015 2.000105 188 188 188
+v -151.545090 -154.755325 2.000105 188 188 188
+v -150.782166 -154.938431 0.000105 188 188 188
+v -150.782166 -154.938431 2.000105 188 188 188
+v -152.269958 -154.455063 2.000105 188 188 188
+v -151.545090 -154.755325 0.000105 188 188 188
+v -151.545090 -154.755325 2.000105 188 188 188
+v -152.938919 -154.045090 2.000104 188 188 188
+v -152.269958 -154.455063 0.000105 188 188 188
+v -152.269958 -154.455063 2.000105 188 188 188
+v -153.535538 -153.535568 2.000104 188 188 188
+v -152.938919 -154.045090 0.000104 188 188 188
+v -152.938919 -154.045090 2.000104 188 188 188
+v -154.045090 -152.938950 2.000104 188 188 188
+v -153.535538 -153.535568 0.000104 188 188 188
+v -153.535538 -153.535568 2.000104 188 188 188
+v -154.455032 -152.269974 2.000103 188 188 188
+v -154.045090 -152.938950 0.000104 188 188 188
+v -154.045090 -152.938950 2.000104 188 188 188
+v -154.755280 -151.545090 2.000103 188 188 188
+v -154.455032 -152.269974 0.000103 188 188 188
+v -154.455032 -152.269974 2.000103 188 188 188
+v -154.938446 -150.782181 2.000102 188 188 188
+v -154.755280 -151.545090 0.000103 188 188 188
+v -154.755280 -151.545090 2.000103 188 188 188
+v -154.938446 -150.782181 2.000102 188 188 188
+v -154.938446 -150.782181 0.000102 188 188 188
+v -154.755280 -151.545090 0.000103 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+v -154.755280 -151.545090 0.000103 188 188 188
+v -154.938446 -150.782181 0.000102 188 188 188
+v -155.000000 -150.000015 2.000102 188 188 188
+v -155.000000 150.000015 1.999898 188 188 188
+v -155.000000 -150.000015 0.000102 188 188 188
+
+f 1 44 2
+f 89 90 3
+f 54 70 55
+f 86 91 92
+f 93 94 95
+f 96 97 72
+f 98 10 99
+f 100 8 101
+f 102 103 7
+f 104 105 6
+f 106 77 107
+f 108 109 78
+f 110 111 81
+f 112 82 113
+f 114 115 4
+f 64 116 117
+f 65 118 119
+f 66 120 121
+f 62 122 123
+f 5 124 125
+f 49 126 127
+f 50 128 129
+f 9 130 131
+f 132 51 133
+f 134 135 71
+f 136 137 21
+f 138 19 139
+f 140 141 17
+f 142 143 69
+f 144 14 145
+f 146 73 147
+f 46 148 149
+f 150 11 151
+f 47 152 153
+f 13 154 155
+f 15 156 157
+f 12 158 159
+f 16 160 161
+f 52 162 163
+f 18 164 165
+f 166 167 20
+f 168 169 53
+f 170 171 172
+f 173 174 175
+f 176 177 178
+f 45 179 180
+f 181 43 182
+f 68 183 184
+f 61 83 37
+f 185 186 39
+f 187 188 38
+f 189 80 63
+f 190 191 79
+f 192 193 67
+f 194 195 40
+f 196 197 41
+f 198 199 42
+f 200 201 202
+f 203 204 205
+f 206 207 208
+f 36 209 210
+f 211 212 74
+f 213 34 214
+f 215 216 75
+f 48 217 218
+f 219 220 35
+f 221 222 60
+f 31 76 59
+f 223 224 32
+f 225 226 227
+f 228 84 229
+f 230 231 85
+f 232 233 28
+f 234 27 235
+f 236 237 25
+f 238 239 22
+f 58 240 241
+f 242 243 56
+f 29 244 30
+f 57 245 246
+f 26 247 248
+f 24 249 250
+f 251 87 252
+f 23 253 254
+f 255 88 256
+f 257 258 259
+f 260 261 262
+f 263 264 265
+f 266 267 268
+f 269 270 271
+f 272 273 274
+f 275 276 277
+f 278 279 280
+f 281 282 283
+f 284 285 286
+f 287 33 288
+f 289 290 291
+f 292 293 294
+f 295 296 297
+f 298 299 300
+f 301 302 303
+f 304 305 306
+f 307 308 309
+f 310 311 312
+f 313 314 315
+f 316 317 318
+f 319 320 321
+f 322 323 324
+f 325 326 327
+f 328 329 330
+f 331 332 333
+f 334 335 336
+f 337 338 339
+f 340 341 342
+f 343 344 345
+f 346 347 348
+f 349 350 351
+f 352 353 354
+f 355 356 357
+f 358 359 360
+f 361 362 363
+f 364 365 366
+f 367 368 369
+f 370 371 372
+f 373 374 375
+f 376 377 378
+f 379 380 381
+f 382 383 384
+f 385 386 387
+f 388 389 390
+
+vt 1.000000 0.983871
+vt 0.000000 0.983871
+vt 1.000000 0.016129
+vt 0.983871 1.000000
+vt 0.016129 1.000000
+vt 0.013606 1.000000
+vt 0.011145 1.000000
+vt 0.008807 0.996774
+vt 0.006649 0.996774
+vt 0.000199 0.987097
+vt 0.000789 0.990323
+vt 0.001758 0.990323
+vt 0.003080 0.993548
+vt 0.004724 0.996774
+vt 0.986394 1.000000
+vt 0.988855 1.000000
+vt 0.991193 0.996774
+vt 0.993351 0.996774
+vt 0.995276 0.996774
+vt 0.996920 0.993548
+vt 0.999801 0.987097
+vt 0.998242 0.990323
+vt 0.999211 0.990323
+vt 0.000000 0.016129
+vt 0.016129 0.000000
+vt 0.013606 0.000000
+vt 0.011145 0.000000
+vt 0.008807 0.003226
+vt 0.006649 0.003226
+vt 0.004724 0.003226
+vt 0.003080 0.006452
+vt 0.001758 0.009677
+vt 0.000789 0.009677
+vt 0.000199 0.012903
+vt 0.983871 0.000000
+vt 0.986394 0.000000
+vt 0.988855 0.000000
+vt 0.991193 0.003226
+vt 0.993351 0.003226
+vt 0.995276 0.003226
+vt 0.996920 0.006452
+vt 0.999801 0.012903
+vt 0.999211 0.009677
+vt 0.998242 0.009677
+
+usemtl Mat_0
+f 3/34 64/33 1/24
+f 1/24 64/33 65/32
+f 1/24 65/32 66/31
+f 66/31 62/30 1/24
+f 1/24 62/30 5/29
+f 1/24 5/29 49/28
+f 49/28 50/27 1/24
+f 1/24 50/27 9/26
+f 1/24 9/26 51/25
+f 55/3 1/24 51/25
+f 51/25 46/35 55/3
+f 55/3 46/35 47/36
+f 55/3 47/36 12/37
+f 12/37 15/38 55/3
+f 55/3 15/38 16/39
+f 55/3 16/39 52/40
+f 52/40 18/41 55/3
+f 18/41 54/42 55/3
+f 20/44 53/43 18/41
+f 37/9 68/10 43/2
+f 43/2 61/8 37/9
+f 63/13 37/9 38/14
+f 67/12 41/11 37/9
+f 43/2 48/5 35/6
+f 35/6 60/7 43/2
+f 43/2 33/4 48/5
+f 58/1 33/4 43/2
+f 58/1 43/2 55/3
+f 59/15 33/4 58/1
+f 58/1 31/16 59/15
+f 56/21 26/20 58/1
+f 58/1 26/20 57/19
+f 58/1 57/19 29/18
+f 29/18 30/17 58/1
+f 56/21 24/22 26/20
+f 23/23 24/22 56/21
+f 58/1 30/17 31/16
+f 67/12 37/9 63/13
+f 43/2 60/7 61/8
+f 37/9 41/11 68/10
+f 18/41 53/43 54/42
+f 55/3 43/2 1/24
+
diff --git a/resources/meshes/Hellbot_Magna_SE_Pro.obj b/resources/meshes/Hellbot_Magna_SE_Pro.obj
new file mode 100644
index 0000000000..3ccafd05a5
--- /dev/null
+++ b/resources/meshes/Hellbot_Magna_SE_Pro.obj
@@ -0,0 +1,924 @@
+# Exported from 3D Builder
+mtllib Hellbot_Magna_SE_Pro.mtl
+
+o Object.1
+v 112.500000 117.499786 1.999997 188 188 188
+v -112.500008 117.499786 1.999997 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -71.801117 -118.044769 0.000402 188 188 188
+v -71.132141 -118.454727 0.000402 188 188 188
+v -70.535538 -118.964279 0.000403 188 188 188
+v 71.321274 -118.163330 0.000402 188 188 188
+v 72.108124 -117.798447 0.000401 188 188 188
+v 72.946182 -117.575027 2.000398 188 188 188
+v 73.810242 -117.499802 2.000398 188 188 188
+v 73.810242 -117.499802 0.000401 188 188 188
+v 117.500000 -112.499817 0.000392 188 188 188
+v 117.438446 -113.281998 0.000393 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 117.438446 -113.281998 2.000391 188 188 188
+v 117.500000 -112.499817 2.000390 188 188 188
+v 117.500000 112.499794 0.000008 188 188 188
+v 117.500000 112.499794 2.000005 188 188 188
+v 117.438446 113.281960 0.000007 188 188 188
+v 117.438446 113.281960 2.000005 188 188 188
+v 117.255280 114.044876 2.000002 188 188 188
+v 116.955032 114.769745 0.000005 188 188 188
+v 116.955032 114.769745 2.000001 188 188 188
+v 116.545074 115.438713 2.000000 188 188 188
+v 116.035522 116.035316 2.000000 188 188 188
+v 116.035522 116.035316 0.000002 188 188 188
+v 115.438919 116.544868 0.000001 188 188 188
+v 115.438919 116.544868 1.999998 188 188 188
+v 114.769943 116.954811 0.000001 188 188 188
+v 114.045090 117.255066 1.999997 188 188 188
+v 114.769943 116.954819 1.999997 188 188 188
+v 113.282166 117.438225 0.000000 188 188 188
+v 71.321274 -118.163330 2.000400 188 188 188
+v 58.189739 -127.499786 0.000418 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 60.678722 -126.836258 0.000417 188 188 188
+v 59.891872 -127.201157 0.000417 188 188 188
+v 61.390667 -126.340897 0.000416 188 188 188
+v 61.390667 -126.340897 2.000413 188 188 188
+v -114.769958 116.954819 1.999997 188 188 188
+v -115.438934 116.544868 0.000001 188 188 188
+v -115.438934 116.544868 1.999998 188 188 188
+v -116.035538 116.035316 0.000002 188 188 188
+v -116.545090 115.438713 0.000003 188 188 188
+v -116.545090 115.438713 2.000000 188 188 188
+v -116.955032 114.769745 2.000001 188 188 188
+v -117.255287 114.044876 2.000002 188 188 188
+v -117.438446 113.281960 0.000007 188 188 188
+v -117.255287 114.044876 0.000005 188 188 188
+v -117.438446 113.281960 2.000005 188 188 188
+v -117.500000 112.499794 2.000005 188 188 188
+v -116.955032 114.769745 0.000005 188 188 188
+v -116.035538 116.035316 2.000000 188 188 188
+v -114.045090 117.255066 1.999997 188 188 188
+v -114.769958 116.954811 0.000001 188 188 188
+v -117.500000 -112.499817 2.000390 188 188 188
+v -117.500000 -112.499817 0.000392 188 188 188
+v -117.438446 -113.281998 0.000393 188 188 188
+v -117.438446 -113.281998 2.000391 188 188 188
+v -117.255287 -114.044907 0.000395 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -116.955032 -114.769775 2.000393 188 188 188
+v -117.255287 -114.044907 2.000392 188 188 188
+v -116.545090 -115.438751 2.000395 188 188 188
+v -116.035538 -116.035355 0.000398 188 188 188
+v -116.545090 -115.438751 0.000397 188 188 188
+v -116.035538 -116.035355 2.000396 188 188 188
+v -115.438934 -116.544891 0.000399 188 188 188
+v -115.438934 -116.544891 2.000396 188 188 188
+v -114.769958 -116.954834 2.000397 188 188 188
+v -114.769958 -116.954834 0.000400 188 188 188
+v -114.045090 -117.255081 0.000400 188 188 188
+v -113.282173 -117.438248 0.000401 188 188 188
+v -113.282173 -117.438248 2.000398 188 188 188
+v -114.045090 -117.255081 2.000397 188 188 188
+v -112.500008 -117.499802 0.000401 188 188 188
+v -112.500008 -117.499802 2.000398 188 188 188
+v -74.071075 -117.499802 2.000398 188 188 188
+v -116.955032 -114.769775 0.000396 188 188 188
+v -73.288895 -117.561371 2.000398 188 188 188
+v -72.525986 -117.744522 2.000398 188 188 188
+v -71.801117 -118.044769 2.000398 188 188 188
+v -70.535538 -118.964279 2.000401 188 188 188
+v -71.132141 -118.454727 2.000400 188 188 188
+v -63.464474 -126.035324 2.000412 188 188 188
+v -62.198891 -126.954819 0.000417 188 188 188
+v -62.867863 -126.544876 2.000413 188 188 188
+v -61.474022 -127.255066 0.000417 188 188 188
+v -62.198891 -126.954819 2.000414 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -60.711113 -127.438232 0.000418 188 188 188
+v -60.711113 -127.438232 2.000414 188 188 188
+v -61.474022 -127.255066 2.000414 188 188 188
+v -59.928940 -127.499786 2.000416 188 188 188
+v 58.189739 -127.499786 2.000416 188 188 188
+v 59.053814 -127.424561 2.000414 188 188 188
+v 59.891872 -127.201157 2.000414 188 188 188
+v 60.678722 -126.836258 2.000413 188 188 188
+v 59.053814 -127.424561 0.000418 188 188 188
+v -62.867863 -126.544876 0.000416 188 188 188
+v 70.609329 -118.658691 2.000400 188 188 188
+v 114.045090 117.255066 0.000000 188 188 188
+v 116.545074 115.438713 0.000003 188 188 188
+v 117.255280 114.044876 0.000005 188 188 188
+v 117.255280 -114.044907 2.000392 188 188 188
+v 116.955032 -114.769775 2.000393 188 188 188
+v 113.282166 -117.438248 0.000401 188 188 188
+v 114.769943 -116.954834 0.000400 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 116.545074 -115.438751 2.000395 188 188 188
+v 116.035522 -116.035355 2.000396 188 188 188
+v 115.438919 -116.544891 2.000396 188 188 188
+v 116.035522 -116.035355 0.000398 188 188 188
+v 114.769943 -116.954834 2.000397 188 188 188
+v 114.045090 -117.255081 2.000397 188 188 188
+v 113.282166 -117.438248 2.000398 188 188 188
+v 114.045090 -117.255081 0.000400 188 188 188
+v 112.500000 -117.499802 2.000398 188 188 188
+v 115.438919 -116.544891 0.000399 188 188 188
+v 116.545074 -115.438751 0.000397 188 188 188
+v 117.255280 -114.044907 0.000395 188 188 188
+v 72.108124 -117.798447 2.000398 188 188 188
+v -63.464474 -126.035324 0.000415 188 188 188
+v -72.525986 -117.744522 0.000401 188 188 188
+v -73.288895 -117.561371 0.000401 188 188 188
+v -114.045090 117.255066 0.000000 188 188 188
+v -113.282173 117.438225 1.999997 188 188 188
+v -113.282173 117.438225 0.000000 188 188 188
+v 72.946182 -117.575027 0.000401 188 188 188
+v 113.282166 117.438225 1.999997 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+
+v 112.500000 117.499786 1.999997 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -112.500008 117.499786 1.999997 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -113.282173 117.438225 0.000000 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -117.500000 -112.499817 0.000392 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -73.288895 -117.561371 0.000401 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -72.525986 -117.744522 0.000401 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -71.801117 -118.044769 0.000402 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -71.132141 -118.454727 0.000402 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v -70.535538 -118.964279 0.000403 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v 71.321274 -118.163330 0.000402 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v 72.108124 -117.798447 0.000401 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v 72.108124 -117.798447 0.000401 188 188 188
+v 72.946182 -117.575027 0.000401 188 188 188
+v 72.946182 -117.575027 2.000398 188 188 188
+v 72.946182 -117.575027 0.000401 188 188 188
+v 73.810242 -117.499802 2.000398 188 188 188
+v 72.946182 -117.575027 0.000401 188 188 188
+v 73.810242 -117.499802 2.000398 188 188 188
+v 73.810242 -117.499802 0.000401 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 73.810242 -117.499802 0.000401 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 117.500000 -112.499817 0.000392 188 188 188
+v 117.438446 -113.281998 0.000393 188 188 188
+v 117.500000 -112.499817 0.000392 188 188 188
+v 117.438446 -113.281998 2.000391 188 188 188
+v 117.500000 -112.499817 0.000392 188 188 188
+v 117.500000 -112.499817 2.000390 188 188 188
+v 117.500000 -112.499817 0.000392 188 188 188
+v 117.500000 -112.499817 2.000390 188 188 188
+v 117.500000 112.499794 0.000008 188 188 188
+v 117.500000 112.499794 2.000005 188 188 188
+v 117.500000 112.499794 0.000008 188 188 188
+v 117.500000 112.499794 2.000005 188 188 188
+v 117.438446 113.281960 0.000007 188 188 188
+v 117.438446 113.281960 2.000005 188 188 188
+v 117.438446 113.281960 0.000007 188 188 188
+v 117.438446 113.281960 2.000005 188 188 188
+v 117.255280 114.044876 0.000005 188 188 188
+v 117.255280 114.044876 2.000002 188 188 188
+v 117.255280 114.044876 0.000005 188 188 188
+v 117.255280 114.044876 2.000002 188 188 188
+v 116.955032 114.769745 0.000005 188 188 188
+v 116.955032 114.769745 2.000001 188 188 188
+v 116.955032 114.769745 0.000005 188 188 188
+v 116.955032 114.769745 2.000001 188 188 188
+v 116.545074 115.438713 0.000003 188 188 188
+v 116.545074 115.438713 2.000000 188 188 188
+v 116.545074 115.438713 0.000003 188 188 188
+v 116.545074 115.438713 2.000000 188 188 188
+v 116.035522 116.035316 0.000002 188 188 188
+v 116.035522 116.035316 2.000000 188 188 188
+v 116.035522 116.035316 0.000002 188 188 188
+v 116.035522 116.035316 2.000000 188 188 188
+v 115.438919 116.544868 0.000001 188 188 188
+v 115.438919 116.544868 1.999998 188 188 188
+v 115.438919 116.544868 0.000001 188 188 188
+v 115.438919 116.544868 1.999998 188 188 188
+v 114.769943 116.954811 0.000001 188 188 188
+v 114.769943 116.954819 1.999997 188 188 188
+v 114.769943 116.954811 0.000001 188 188 188
+v 114.769943 116.954819 1.999997 188 188 188
+v 114.045090 117.255066 0.000000 188 188 188
+v 114.045090 117.255066 1.999997 188 188 188
+v 114.045090 117.255066 0.000000 188 188 188
+v 114.045090 117.255066 1.999997 188 188 188
+v 113.282166 117.438225 0.000000 188 188 188
+v 113.282166 117.438225 1.999997 188 188 188
+v 113.282166 117.438225 0.000000 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 71.321274 -118.163330 0.000402 188 188 188
+v 71.321274 -118.163330 2.000400 188 188 188
+v 71.321274 -118.163330 0.000402 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 71.321274 -118.163330 0.000402 188 188 188
+v -63.464474 -126.035324 0.000415 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 58.189739 -127.499786 0.000418 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 59.053814 -127.424561 0.000418 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 59.891872 -127.201157 0.000417 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 60.678722 -126.836258 0.000417 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 61.390667 -126.340897 0.000416 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 61.390667 -126.340897 2.000413 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v -114.045090 117.255066 1.999997 188 188 188
+v -114.045090 117.255066 0.000000 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -114.769958 116.954811 0.000001 188 188 188
+v -114.045090 117.255066 0.000000 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -114.769958 116.954811 0.000001 188 188 188
+v -115.438934 116.544868 0.000001 188 188 188
+v -114.769958 116.954811 0.000001 188 188 188
+v -114.769958 116.954819 1.999997 188 188 188
+v -115.438934 116.544868 0.000001 188 188 188
+v -115.438934 116.544868 1.999998 188 188 188
+v -115.438934 116.544868 0.000001 188 188 188
+v -115.438934 116.544868 1.999998 188 188 188
+v -116.035538 116.035316 0.000002 188 188 188
+v -116.035538 116.035316 2.000000 188 188 188
+v -116.035538 116.035316 0.000002 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -116.545090 115.438713 0.000003 188 188 188
+v -116.035538 116.035316 0.000002 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -116.545090 115.438713 0.000003 188 188 188
+v -116.955032 114.769745 0.000005 188 188 188
+v -116.545090 115.438713 0.000003 188 188 188
+v -116.545090 115.438713 2.000000 188 188 188
+v -116.955032 114.769745 0.000005 188 188 188
+v -116.955032 114.769745 2.000001 188 188 188
+v -116.955032 114.769745 0.000005 188 188 188
+v -116.955032 114.769745 2.000001 188 188 188
+v -117.255287 114.044876 0.000005 188 188 188
+v -117.255287 114.044876 2.000002 188 188 188
+v -117.255287 114.044876 0.000005 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -117.438446 113.281960 0.000007 188 188 188
+v -117.255287 114.044876 0.000005 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -117.438446 113.281960 0.000007 188 188 188
+v -117.438446 113.281960 2.000005 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -117.438446 113.281960 2.000005 188 188 188
+v -117.255287 114.044876 2.000002 188 188 188
+v -117.438446 113.281960 0.000007 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -117.255287 114.044876 0.000005 188 188 188
+v -116.955032 114.769745 0.000005 188 188 188
+v -116.545090 115.438713 2.000000 188 188 188
+v -116.035538 116.035316 2.000000 188 188 188
+v -116.545090 115.438713 0.000003 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -116.035538 116.035316 0.000002 188 188 188
+v -115.438934 116.544868 0.000001 188 188 188
+v -114.769958 116.954819 1.999997 188 188 188
+v -114.045090 117.255066 1.999997 188 188 188
+v -114.769958 116.954811 0.000001 188 188 188
+v -114.045090 117.255066 0.000000 188 188 188
+v -113.282173 117.438225 1.999997 188 188 188
+v -113.282173 117.438225 0.000000 188 188 188
+v -117.500000 112.499794 2.000005 188 188 188
+v -117.500000 -112.499817 0.000392 188 188 188
+v -117.500000 -112.499817 2.000390 188 188 188
+v -117.500000 -112.499817 0.000392 188 188 188
+v -117.500000 -112.499817 2.000390 188 188 188
+v -117.438446 -113.281998 0.000393 188 188 188
+v -117.438446 -113.281998 2.000391 188 188 188
+v -117.438446 -113.281998 0.000393 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -117.255287 -114.044907 0.000395 188 188 188
+v -117.438446 -113.281998 0.000393 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -117.255287 -114.044907 0.000395 188 188 188
+v -116.955032 -114.769775 0.000396 188 188 188
+v -117.255287 -114.044907 0.000395 188 188 188
+v -117.255287 -114.044907 2.000392 188 188 188
+v -116.955032 -114.769775 0.000396 188 188 188
+v -116.955032 -114.769775 2.000393 188 188 188
+v -116.955032 -114.769775 0.000396 188 188 188
+v -116.955032 -114.769775 2.000393 188 188 188
+v -116.545090 -115.438751 0.000397 188 188 188
+v -116.545090 -115.438751 2.000395 188 188 188
+v -116.545090 -115.438751 0.000397 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -116.035538 -116.035355 0.000398 188 188 188
+v -116.545090 -115.438751 0.000397 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -116.035538 -116.035355 0.000398 188 188 188
+v -115.438934 -116.544891 0.000399 188 188 188
+v -116.035538 -116.035355 0.000398 188 188 188
+v -116.035538 -116.035355 2.000396 188 188 188
+v -115.438934 -116.544891 0.000399 188 188 188
+v -115.438934 -116.544891 2.000396 188 188 188
+v -115.438934 -116.544891 0.000399 188 188 188
+v -115.438934 -116.544891 2.000396 188 188 188
+v -114.769958 -116.954834 0.000400 188 188 188
+v -114.769958 -116.954834 2.000397 188 188 188
+v -114.769958 -116.954834 0.000400 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -114.045090 -117.255081 0.000400 188 188 188
+v -114.769958 -116.954834 0.000400 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -114.045090 -117.255081 0.000400 188 188 188
+v -112.500008 -117.499802 0.000401 188 188 188
+v -114.045090 -117.255081 0.000400 188 188 188
+v -113.282173 -117.438248 0.000401 188 188 188
+v -114.045090 -117.255081 0.000400 188 188 188
+v -114.045090 -117.255081 2.000397 188 188 188
+v -113.282173 -117.438248 0.000401 188 188 188
+v -113.282173 -117.438248 2.000398 188 188 188
+v -112.500008 -117.499802 0.000401 188 188 188
+v -112.500008 -117.499802 0.000401 188 188 188
+v -113.282173 -117.438248 2.000398 188 188 188
+v -113.282173 -117.438248 0.000401 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -112.500008 -117.499802 2.000398 188 188 188
+v -112.500008 -117.499802 0.000401 188 188 188
+v -112.500008 -117.499802 2.000398 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -114.045090 -117.255081 2.000397 188 188 188
+v -114.769958 -116.954834 2.000397 188 188 188
+v -114.045090 -117.255081 0.000400 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -114.769958 -116.954834 0.000400 188 188 188
+v -115.438934 -116.544891 0.000399 188 188 188
+v -116.035538 -116.035355 2.000396 188 188 188
+v -116.545090 -115.438751 2.000395 188 188 188
+v -116.035538 -116.035355 0.000398 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -116.545090 -115.438751 0.000397 188 188 188
+v -116.955032 -114.769775 0.000396 188 188 188
+v -117.255287 -114.044907 2.000392 188 188 188
+v -117.438446 -113.281998 2.000391 188 188 188
+v -117.255287 -114.044907 0.000395 188 188 188
+v -74.071075 -117.499802 2.000398 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -73.288895 -117.561371 2.000398 188 188 188
+v -73.288895 -117.561371 0.000401 188 188 188
+v -72.525986 -117.744522 2.000398 188 188 188
+v -72.525986 -117.744522 0.000401 188 188 188
+v -71.801117 -118.044769 2.000398 188 188 188
+v -71.801117 -118.044769 0.000402 188 188 188
+v -71.132141 -118.454727 2.000400 188 188 188
+v -71.132141 -118.454727 0.000402 188 188 188
+v -70.535538 -118.964279 2.000401 188 188 188
+v -63.464474 -126.035324 0.000415 188 188 188
+v -63.464474 -126.035324 2.000412 188 188 188
+v -63.464474 -126.035324 0.000415 188 188 188
+v -63.464474 -126.035324 0.000415 188 188 188
+v -70.535538 -118.964279 2.000401 188 188 188
+v -70.535538 -118.964279 0.000403 188 188 188
+v -63.464474 -126.035324 2.000412 188 188 188
+v -62.867863 -126.544876 0.000416 188 188 188
+v -62.867863 -126.544876 2.000413 188 188 188
+v -62.867863 -126.544876 0.000416 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -62.198891 -126.954819 0.000417 188 188 188
+v -62.867863 -126.544876 0.000416 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -62.198891 -126.954819 0.000417 188 188 188
+v -61.474022 -127.255066 0.000417 188 188 188
+v -62.198891 -126.954819 0.000417 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -61.474022 -127.255066 0.000417 188 188 188
+v -60.711113 -127.438232 0.000418 188 188 188
+v -61.474022 -127.255066 0.000417 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -60.711113 -127.438232 0.000418 188 188 188
+v -62.198891 -126.954819 2.000414 188 188 188
+v -62.867863 -126.544876 2.000413 188 188 188
+v -62.198891 -126.954819 0.000417 188 188 188
+v -61.474022 -127.255066 2.000414 188 188 188
+v -62.198891 -126.954819 2.000414 188 188 188
+v -61.474022 -127.255066 0.000417 188 188 188
+v -60.711113 -127.438232 2.000414 188 188 188
+v -61.474022 -127.255066 2.000414 188 188 188
+v -60.711113 -127.438232 0.000418 188 188 188
+v -60.711113 -127.438232 2.000414 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -59.928940 -127.499786 2.000416 188 188 188
+v 58.189739 -127.499786 0.000418 188 188 188
+v 58.189739 -127.499786 2.000416 188 188 188
+v 59.053814 -127.424561 0.000418 188 188 188
+v 59.053814 -127.424561 2.000414 188 188 188
+v 59.891872 -127.201157 0.000417 188 188 188
+v 59.891872 -127.201157 2.000414 188 188 188
+v 60.678722 -126.836258 0.000417 188 188 188
+v 61.390667 -126.340897 2.000413 188 188 188
+v 60.678722 -126.836258 2.000413 188 188 188
+v 61.390667 -126.340897 0.000416 188 188 188
+v 60.678722 -126.836258 2.000413 188 188 188
+v 60.678722 -126.836258 0.000417 188 188 188
+v 61.390667 -126.340897 0.000416 188 188 188
+v 59.891872 -127.201157 2.000414 188 188 188
+v 59.891872 -127.201157 0.000417 188 188 188
+v 60.678722 -126.836258 0.000417 188 188 188
+v 59.053814 -127.424561 2.000414 188 188 188
+v 59.053814 -127.424561 0.000418 188 188 188
+v 59.891872 -127.201157 0.000417 188 188 188
+v 58.189739 -127.499786 2.000416 188 188 188
+v 58.189739 -127.499786 0.000418 188 188 188
+v 59.053814 -127.424561 0.000418 188 188 188
+v 58.189739 -127.499786 0.000418 188 188 188
+v -59.928940 -127.499786 2.000416 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -59.928940 -127.499786 0.000418 188 188 188
+v -62.867863 -126.544876 0.000416 188 188 188
+v -63.464474 -126.035324 0.000415 188 188 188
+v 71.321274 -118.163330 2.000400 188 188 188
+v 70.609329 -118.658691 2.000400 188 188 188
+v 70.609329 -118.658691 0.000403 188 188 188
+v 113.282166 117.438225 0.000000 188 188 188
+v 114.045090 117.255066 0.000000 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 114.045090 117.255066 0.000000 188 188 188
+v 114.769943 116.954811 0.000001 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 114.769943 116.954811 0.000001 188 188 188
+v 115.438919 116.544868 0.000001 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 115.438919 116.544868 0.000001 188 188 188
+v 116.035522 116.035316 0.000002 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 116.035522 116.035316 0.000002 188 188 188
+v 116.545074 115.438713 0.000003 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 116.545074 115.438713 0.000003 188 188 188
+v 116.955032 114.769745 0.000005 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 116.955032 114.769745 0.000005 188 188 188
+v 117.255280 114.044876 0.000005 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 117.255280 114.044876 0.000005 188 188 188
+v 117.438446 113.281960 0.000007 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 117.438446 113.281960 0.000007 188 188 188
+v 117.500000 112.499794 0.000008 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 117.500000 112.499794 0.000008 188 188 188
+v 73.810242 -117.499802 0.000401 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 117.438446 -113.281998 2.000391 188 188 188
+v 117.438446 -113.281998 0.000393 188 188 188
+v 117.255280 -114.044907 2.000392 188 188 188
+v 117.438446 -113.281998 0.000393 188 188 188
+v 117.255280 -114.044907 2.000392 188 188 188
+v 117.255280 -114.044907 0.000395 188 188 188
+v 116.955032 -114.769775 2.000393 188 188 188
+v 117.255280 -114.044907 0.000395 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 117.255280 -114.044907 0.000395 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 113.282166 -117.438248 0.000401 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 114.045090 -117.255081 0.000400 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 114.769943 -116.954834 0.000400 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 116.545074 -115.438751 0.000397 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 116.545074 -115.438751 2.000395 188 188 188
+v 116.545074 -115.438751 0.000397 188 188 188
+v 116.035522 -116.035355 2.000396 188 188 188
+v 116.545074 -115.438751 0.000397 188 188 188
+v 116.035522 -116.035355 2.000396 188 188 188
+v 116.035522 -116.035355 0.000398 188 188 188
+v 115.438919 -116.544891 2.000396 188 188 188
+v 116.035522 -116.035355 0.000398 188 188 188
+v 115.438919 -116.544891 0.000399 188 188 188
+v 114.769943 -116.954834 0.000400 188 188 188
+v 116.035522 -116.035355 0.000398 188 188 188
+v 114.769943 -116.954834 0.000400 188 188 188
+v 115.438919 -116.544891 0.000399 188 188 188
+v 114.769943 -116.954834 2.000397 188 188 188
+v 114.769943 -116.954834 0.000400 188 188 188
+v 114.045090 -117.255081 2.000397 188 188 188
+v 114.045090 -117.255081 0.000400 188 188 188
+v 113.282166 -117.438248 2.000398 188 188 188
+v 113.282166 -117.438248 0.000401 188 188 188
+v 115.438919 -116.544891 2.000396 188 188 188
+v 114.769943 -116.954834 2.000397 188 188 188
+v 115.438919 -116.544891 0.000399 188 188 188
+v 116.035522 -116.035355 0.000398 188 188 188
+v 114.769943 -116.954834 0.000400 188 188 188
+v 116.545074 -115.438751 0.000397 188 188 188
+v 114.045090 -117.255081 2.000397 188 188 188
+v 114.045090 -117.255081 0.000400 188 188 188
+v 114.769943 -116.954834 0.000400 188 188 188
+v 113.282166 -117.438248 2.000398 188 188 188
+v 113.282166 -117.438248 0.000401 188 188 188
+v 114.045090 -117.255081 0.000400 188 188 188
+v 112.500000 -117.499802 2.000398 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 113.282166 -117.438248 0.000401 188 188 188
+v 116.955032 -114.769775 2.000393 188 188 188
+v 116.545074 -115.438751 2.000395 188 188 188
+v 116.955032 -114.769775 0.000396 188 188 188
+v 117.255280 -114.044907 0.000395 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 117.438446 -113.281998 0.000393 188 188 188
+v 117.500000 -112.499817 0.000392 188 188 188
+v 73.810242 -117.499802 0.000401 188 188 188
+v 117.500000 112.499794 0.000008 188 188 188
+v 112.500000 -117.499802 2.000398 188 188 188
+v 73.810242 -117.499802 2.000398 188 188 188
+v 112.500000 -117.499802 0.000401 188 188 188
+v 73.810242 -117.499802 0.000401 188 188 188
+v 72.946182 -117.575027 0.000401 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 72.946182 -117.575027 2.000398 188 188 188
+v 72.108124 -117.798447 2.000398 188 188 188
+v 72.108124 -117.798447 0.000401 188 188 188
+v 72.108124 -117.798447 2.000398 188 188 188
+v 71.321274 -118.163330 0.000402 188 188 188
+v 72.108124 -117.798447 0.000401 188 188 188
+v -63.464474 -126.035324 0.000415 188 188 188
+v -70.535538 -118.964279 0.000403 188 188 188
+v 71.321274 -118.163330 0.000402 188 188 188
+v -70.535538 -118.964279 0.000403 188 188 188
+v -70.535538 -118.964279 2.000401 188 188 188
+v -71.132141 -118.454727 0.000402 188 188 188
+v -71.132141 -118.454727 0.000402 188 188 188
+v -71.132141 -118.454727 2.000400 188 188 188
+v -71.801117 -118.044769 0.000402 188 188 188
+v -71.801117 -118.044769 0.000402 188 188 188
+v -71.801117 -118.044769 2.000398 188 188 188
+v -72.525986 -117.744522 0.000401 188 188 188
+v -72.525986 -117.744522 0.000401 188 188 188
+v -72.525986 -117.744522 2.000398 188 188 188
+v -73.288895 -117.561371 0.000401 188 188 188
+v -73.288895 -117.561371 0.000401 188 188 188
+v -73.288895 -117.561371 2.000398 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -74.071075 -117.499802 0.000401 188 188 188
+v -117.438446 -113.281998 0.000393 188 188 188
+v -117.500000 -112.499817 0.000392 188 188 188
+v -117.500000 -112.499817 0.000392 188 188 188
+v -117.500000 112.499794 2.000005 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -117.500000 112.499794 0.000008 188 188 188
+v -114.045090 117.255066 0.000000 188 188 188
+v -113.282173 117.438225 0.000000 188 188 188
+v -113.282173 117.438225 1.999997 188 188 188
+v -112.500008 117.499786 1.999997 188 188 188
+v -113.282173 117.438225 0.000000 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+v 72.946182 -117.575027 0.000401 188 188 188
+v -112.500008 117.499786 0.000000 188 188 188
+v 112.500000 117.499786 1.999997 188 188 188
+v 113.282166 117.438225 1.999997 188 188 188
+v 112.500000 117.499786 0.000000 188 188 188
+
+f 1 132 4
+f 2 133 134
+f 129 135 136
+f 3 137 138
+f 58 139 140
+f 62 141 142
+f 126 143 144
+f 125 145 146
+f 5 147 148
+f 6 149 150
+f 7 151 152
+f 8 153 154
+f 9 155 156
+f 130 157 158
+f 10 159 160
+f 11 161 162
+f 163 164 12
+f 15 165 166
+f 167 168 13
+f 14 169 170
+f 16 171 172
+f 17 173 174
+f 175 176 18
+f 19 177 178
+f 179 180 20
+f 21 181 182
+f 183 184 105
+f 22 185 186
+f 187 188 23
+f 24 189 190
+f 191 192 104
+f 25 193 194
+f 195 196 27
+f 26 197 198
+f 199 200 28
+f 29 201 202
+f 203 204 30
+f 32 205 206
+f 207 208 103
+f 31 209 210
+f 211 212 33
+f 131 213 214
+f 215 216 217
+f 123 34 218
+f 219 36 220
+f 221 124 222
+f 91 223 224
+f 35 225 226
+f 100 227 228
+f 38 229 230
+f 37 231 232
+f 39 233 234
+f 40 235 236
+f 102 237 238
+f 55 128 127
+f 56 239 240
+f 241 242 243
+f 244 42 245
+f 246 41 247
+f 43 248 249
+f 44 250 251
+f 54 252 253
+f 45 254 255
+f 256 257 258
+f 259 53 260
+f 261 46 262
+f 47 263 264
+f 50 265 266
+f 48 267 268
+f 49 269 270
+f 271 272 273
+f 274 51 275
+f 52 276 277
+f 278 279 280
+f 281 282 283
+f 284 285 286
+f 287 288 289
+f 290 291 292
+f 293 294 295
+f 57 296 297
+f 59 298 299
+f 60 300 301
+f 61 302 303
+f 304 305 306
+f 307 80 308
+f 309 64 310
+f 63 311 312
+f 67 313 314
+f 65 315 316
+f 66 317 318
+f 319 320 321
+f 322 69 323
+f 324 68 325
+f 70 326 327
+f 72 328 329
+f 71 330 331
+f 73 332 333
+f 334 335 336
+f 337 77 338
+f 339 74 340
+f 341 76 342
+f 75 343 344
+f 78 345 346
+f 347 348 349
+f 350 351 352
+f 79 353 354
+f 355 356 357
+f 358 359 360
+f 361 362 363
+f 364 365 366
+f 367 368 369
+f 81 370 371
+f 82 372 373
+f 83 374 375
+f 85 376 377
+f 84 378 379
+f 86 380 381
+f 101 382 383
+f 384 385 386
+f 88 387 388
+f 87 389 390
+f 391 392 393
+f 394 89 395
+f 396 90 397
+f 398 92 399
+f 400 94 401
+f 402 93 403
+f 404 405 406
+f 407 408 409
+f 410 411 412
+f 95 413 414
+f 96 415 416
+f 97 417 418
+f 98 419 420
+f 99 421 422
+f 423 424 425
+f 426 427 428
+f 429 430 431
+f 432 433 434
+f 435 436 437
+f 438 439 440
+f 441 442 443
+f 444 445 446
+f 447 448 449
+f 450 451 452
+f 453 454 455
+f 456 457 458
+f 459 460 461
+f 462 463 464
+f 465 466 467
+f 468 469 470
+f 471 472 473
+f 474 475 476
+f 477 106 478
+f 479 122 480
+f 481 107 482
+f 483 110 484
+f 485 486 487
+f 108 488 489
+f 118 490 491
+f 109 492 493
+f 121 494 495
+f 111 496 497
+f 498 112 499
+f 500 114 501
+f 502 113 503
+f 504 120 505
+f 506 507 508
+f 115 509 510
+f 511 116 512
+f 513 117 514
+f 515 119 516
+f 517 518 519
+f 520 521 522
+f 523 524 525
+f 526 527 528
+f 529 530 531
+f 532 533 534
+f 535 536 537
+f 538 539 540
+f 541 542 543
+f 544 545 546
+f 547 548 549
+f 550 551 552
+f 553 554 555
+f 556 557 558
+f 559 560 561
+f 562 563 564
+f 565 566 567
+f 568 569 570
+f 571 572 573
+f 574 575 576
+f 577 578 579
+f 580 581 582
+f 583 584 585
+f 586 587 588
+
+vt 0.203940 0.049153
+vt 0.742257 0.013039
+vt 0.031741 0.991253
+vt 0.745853 0.013339
+vt 0.749342 0.014231
+vt 0.752617 0.015688
+vt 0.755581 0.017666
+vt 0.793954 0.048339
+vt 0.796918 0.050316
+vt 0.968329 0.991253
+vt 0.800193 0.051773
+vt 0.971585 0.991007
+vt 0.974761 0.990276
+vt 0.977778 0.989077
+vt 0.980563 0.987440
+vt 0.983046 0.985405
+vt 0.985167 0.983023
+vt 0.986874 0.980352
+vt 0.988124 0.977458
+vt 0.988886 0.974412
+vt 0.989142 0.971289
+vt 0.803682 0.052665
+vt 0.989142 0.072929
+vt 0.988886 0.069806
+vt 0.807279 0.052966
+vt 0.988124 0.066760
+vt 0.986874 0.063866
+vt 0.985167 0.061195
+vt 0.983046 0.058813
+vt 0.980563 0.056778
+vt 0.977778 0.055142
+vt 0.974761 0.053943
+vt 0.968329 0.052966
+vt 0.971585 0.053211
+vt 0.250574 0.013039
+vt 0.206423 0.047118
+vt 0.247318 0.013284
+vt 0.244143 0.014016
+vt 0.241125 0.015214
+vt 0.238341 0.016851
+vt 0.235857 0.018886
+vt 0.201155 0.050790
+vt 0.198138 0.051989
+vt 0.194962 0.052720
+vt 0.191706 0.052966
+vt 0.010928 0.971289
+vt 0.010928 0.072929
+vt 0.031741 0.052966
+vt 0.011184 0.069806
+vt 0.011947 0.066760
+vt 0.013197 0.063866
+vt 0.014903 0.061195
+vt 0.017024 0.058813
+vt 0.019508 0.056778
+vt 0.022292 0.055142
+vt 0.025310 0.053943
+vt 0.028485 0.053211
+vt 0.028485 0.991007
+vt 0.025310 0.990276
+vt 0.022292 0.989077
+vt 0.019508 0.987440
+vt 0.017024 0.985405
+vt 0.014903 0.983023
+vt 0.013197 0.980352
+vt 0.011947 0.977458
+vt 0.011184 0.974412
+
+usemtl Mat_0
+f 123/11 31/13 131/12
+f 123/11 131/12 1/10
+f 34/9 123/11 1/10
+f 40/7 102/8 2/3
+f 99/6 40/7 2/3
+f 98/5 99/6 2/3
+f 97/4 98/5 2/3
+f 96/2 97/4 2/3
+f 85/1 96/2 2/3
+f 83/42 85/1 2/3
+f 82/43 83/42 2/3
+f 81/44 82/43 2/3
+f 79/45 81/44 2/3
+f 52/46 79/45 2/3
+f 128/58 52/46 2/3
+f 55/59 52/46 128/58
+f 51/66 52/46 48/65
+f 48/65 52/46 47/64
+f 47/64 52/46 46/63
+f 46/63 52/46 54/62
+f 54/62 52/46 43/61
+f 43/61 52/46 41/60
+f 41/60 52/46 55/59
+f 57/47 79/45 52/46
+f 75/57 78/48 76/56
+f 76/56 78/48 71/55
+f 71/55 78/48 70/54
+f 70/54 78/48 68/53
+f 68/53 78/48 65/52
+f 65/52 78/48 63/51
+f 63/51 78/48 64/50
+f 64/50 78/48 60/49
+f 60/49 78/48 57/47
+f 78/48 79/45 57/47
+f 95/35 96/2 85/1
+f 84/36 95/35 85/1
+f 93/37 95/35 84/36
+f 94/38 93/37 84/36
+f 90/39 94/38 84/36
+f 88/40 90/39 84/36
+f 86/41 88/40 84/36
+f 102/8 34/9 2/3
+f 123/11 32/14 31/13
+f 123/11 29/15 32/14
+f 123/11 26/16 29/15
+f 123/11 25/17 26/16
+f 123/11 24/18 25/17
+f 123/11 22/19 24/18
+f 123/11 21/20 22/19
+f 123/11 19/21 21/20
+f 123/11 10/22 19/21
+f 10/22 17/23 19/21
+f 10/22 16/24 17/23
+f 11/25 116/32 115/31
+f 11/25 115/31 113/30
+f 11/25 119/33 116/32
+f 119/33 117/34 116/32
+f 11/25 113/30 112/29
+f 11/25 112/29 111/28
+f 11/25 111/28 107/27
+f 11/25 107/27 106/26
+f 11/25 106/26 16/24
+f 10/22 11/25 16/24
+f 34/9 1/10 2/3
+
diff --git a/resources/meshes/mixware_hyper_k_platform.stl b/resources/meshes/mixware_hyper_k_platform.stl
new file mode 100644
index 0000000000..98e865b873
Binary files /dev/null and b/resources/meshes/mixware_hyper_k_platform.stl differ
diff --git a/resources/meshes/mixware_hyper_s_platform.stl b/resources/meshes/mixware_hyper_s_platform.stl
index a1cff2b92e..c969d554ca 100644
Binary files a/resources/meshes/mixware_hyper_s_platform.stl and b/resources/meshes/mixware_hyper_s_platform.stl differ
diff --git a/resources/meshes/mixware_vulcan_platform.stl b/resources/meshes/mixware_vulcan_platform.stl
new file mode 100644
index 0000000000..f064c797cb
Binary files /dev/null and b/resources/meshes/mixware_vulcan_platform.stl differ
diff --git a/resources/meshes/mixware_wand_platform.stl b/resources/meshes/mixware_wand_platform.stl
new file mode 100644
index 0000000000..ce9991b0f9
Binary files /dev/null and b/resources/meshes/mixware_wand_platform.stl differ
diff --git a/resources/qml/MachineSettings/ComboBoxWithOptions.qml b/resources/qml/MachineSettings/ComboBoxWithOptions.qml
index 7ba7c0f701..5046859d14 100644
--- a/resources/qml/MachineSettings/ComboBoxWithOptions.qml
+++ b/resources/qml/MachineSettings/ComboBoxWithOptions.qml
@@ -65,31 +65,22 @@ UM.TooltipArea
     {
         id: defaultOptionsModel
 
-        function updateModel()
-        {
-            clear()
+        function updateModel() {
+            clear();
 
-            if(!propertyProvider.properties.options)
-            {
-                return
+            if (!propertyProvider.properties.options) {
+                return;
             }
 
-            if (typeof propertyProvider.properties["options"] === "string")
-            {
-                return
+            if (typeof(propertyProvider.properties["options"]) === "string") {
+                return;
             }
 
-
-            for (var i = 0; i < propertyProvider.properties["options"].keys().length; i++)
-            {
-                var key = propertyProvider.properties["options"].keys()[i]
-                var value = propertyProvider.properties["options"][key]
-                append({ text: value, code: key })
-
-                if (propertyProvider.properties.value === key)
-                {
-                    comboBox.currentIndex = i
-                }
+            const keys = propertyProvider.properties["options"].keys();
+            for (let index = 0; index < propertyProvider.properties["options"].keys().length; index ++) {
+                const key = propertyProvider.properties["options"].keys()[index];
+                const value = propertyProvider.properties["options"][key];
+                defaultOptionsModel.append({ text: value, value: key });
             }
         }
 
@@ -114,36 +105,27 @@ UM.TooltipArea
         model: defaultOptionsModel
         textRole: "text"
 
-        currentIndex:
-        {
-            var currentValue = propertyProvider.properties.value
-            var index = 0
-            for (var i = 0; i < model.count; i++)
-            {
-                if (model.get(i).value == currentValue)
-                {
-                    index = i
-                    break
+        currentIndex: {
+            const currentValue = propertyProvider.properties.value
+            for (let i = 0; i < model.count; i ++) {
+                if (model.get(i).value === currentValue) {
+                    return i;
                 }
             }
-            return index
+            return -1;
         }
 
-        onActivated:
-        {
-            var newValue = model.get(index).value
-            if (propertyProvider.properties.value !== newValue && newValue !== undefined)
-            {
-                if (setValueFunction !== null)
-                {
-                    setValueFunction(newValue)
+        onActivated: function (index) {
+            const newValue = model.get(index).value;
+
+            if (propertyProvider.properties.value !== newValue && newValue !== undefined) {
+                if (setValueFunction !== null) {
+                    setValueFunction(newValue);
+                } else {
+                    propertyProvider.setPropertyValue("value", newValue);
                 }
-                else
-                {
-                    propertyProvider.setPropertyValue("value", newValue)
-                }
-                forceUpdateOnChangeFunction()
-                afterOnEditingFinishedFunction()
+                forceUpdateOnChangeFunction();
+                afterOnEditingFinishedFunction();
             }
         }
     }
diff --git a/resources/qml/PrinterOutput/HeatedBedBox.qml b/resources/qml/PrinterOutput/HeatedBedBox.qml
index 8a1d13524f..172606c56d 100644
--- a/resources/qml/PrinterOutput/HeatedBedBox.qml
+++ b/resources/qml/PrinterOutput/HeatedBedBox.qml
@@ -32,7 +32,7 @@ Item
         UM.Label
         {
             id: bedTargetTemperature
-            text: printerModel != null ? printerModel.targetBedTemperature + "°C" : ""
+            text: printerModel != null ? Math.round(printerModel.targetBedTemperature) + "°C" : ""
             font: UM.Theme.getFont("default_bold")
             color: UM.Theme.getColor("text_inactive")
             anchors.right: parent.right
@@ -66,7 +66,7 @@ Item
         UM.Label
         {
             id: bedCurrentTemperature
-            text: printerModel != null ? printerModel.bedTemperature + "°C" : ""
+            text: printerModel != null ? Math.round(printerModel.bedTemperature) + "°C" : ""
             font: UM.Theme.getFont("large_bold")
             anchors.right: bedTargetTemperature.left
             anchors.top: parent.top
@@ -293,4 +293,4 @@ Item
             }
         }
     }
-}
\ No newline at end of file
+}
diff --git a/resources/quality/mixware_hyper_k/mixware_hyper_k_draft.inst.cfg b/resources/quality/mixware_hyper_k/mixware_hyper_k_draft.inst.cfg
new file mode 100644
index 0000000000..277e19cdaf
--- /dev/null
+++ b/resources/quality/mixware_hyper_k/mixware_hyper_k_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = mixware_hyper_k
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = draft
+setting_version = 21
+type = quality
+
+[values]
+layer_height = 0.15
+layer_height_0 = 0.15
+support_interface_height = =layer_height*8
+top_bottom_thickness = =layer_height_0 + layer_height * 6
+wall_thickness = =line_width*3
+
diff --git a/resources/quality/mixware_hyper_k/mixware_hyper_k_extra_fast.inst.cfg b/resources/quality/mixware_hyper_k/mixware_hyper_k_extra_fast.inst.cfg
new file mode 100644
index 0000000000..6b86785c9c
--- /dev/null
+++ b/resources/quality/mixware_hyper_k/mixware_hyper_k_extra_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = mixware_hyper_k
+name = Coarse
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = coarse
+setting_version = 21
+type = quality
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+support_interface_height = =layer_height*4
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*2
+
diff --git a/resources/quality/mixware_hyper_k/mixware_hyper_k_normal.inst.cfg b/resources/quality/mixware_hyper_k/mixware_hyper_k_normal.inst.cfg
new file mode 100644
index 0000000000..48d40c70c2
--- /dev/null
+++ b/resources/quality/mixware_hyper_k/mixware_hyper_k_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = mixware_hyper_k
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = normal
+setting_version = 21
+type = quality
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.12
+support_interface_height = =layer_height*12
+top_bottom_thickness = =layer_height_0+layer_height*10
+wall_thickness = =line_width*3
+
diff --git a/resources/quality/mixware_hyper_s/mixware_hyper_s_draft.inst.cfg b/resources/quality/mixware_hyper_s/mixware_hyper_s_draft.inst.cfg
index 0be2ee473a..6f9800cfaa 100644
--- a/resources/quality/mixware_hyper_s/mixware_hyper_s_draft.inst.cfg
+++ b/resources/quality/mixware_hyper_s/mixware_hyper_s_draft.inst.cfg
@@ -15,6 +15,7 @@ infill_before_walls = false
 infill_overlap = 30.0
 infill_wipe_dist = 0.0
 layer_height = 0.15
+layer_height_0 = 0.15
 retraction_combing = all
 retraction_extrusion_window = 10
 retraction_min_travel = 1.5
diff --git a/resources/quality/mixware_hyper_s/mixware_hyper_s_extra_fast.inst.cfg b/resources/quality/mixware_hyper_s/mixware_hyper_s_extra_fast.inst.cfg
index 7feadbb00e..2ac5d8f50b 100644
--- a/resources/quality/mixware_hyper_s/mixware_hyper_s_extra_fast.inst.cfg
+++ b/resources/quality/mixware_hyper_s/mixware_hyper_s_extra_fast.inst.cfg
@@ -15,6 +15,7 @@ infill_before_walls = false
 infill_overlap = 30.0
 infill_wipe_dist = 0.0
 layer_height = 0.2
+layer_height_0 = 0.2
 retraction_combing = all
 retraction_extrusion_window = 10
 retraction_min_travel = 1.5
diff --git a/resources/quality/mixware_hyper_s/mixware_hyper_s_normal.inst.cfg b/resources/quality/mixware_hyper_s/mixware_hyper_s_normal.inst.cfg
index eec1040803..6c040aefd6 100644
--- a/resources/quality/mixware_hyper_s/mixware_hyper_s_normal.inst.cfg
+++ b/resources/quality/mixware_hyper_s/mixware_hyper_s_normal.inst.cfg
@@ -15,6 +15,7 @@ infill_before_walls = false
 infill_overlap = 30.0
 infill_wipe_dist = 0.0
 layer_height = 0.1
+layer_height_0 = 0.12
 retraction_combing = all
 retraction_extrusion_window = 10
 retraction_min_travel = 1.5
diff --git a/resources/quality/mixware_vulcan/mixware_vulcan_draft.inst.cfg b/resources/quality/mixware_vulcan/mixware_vulcan_draft.inst.cfg
new file mode 100644
index 0000000000..21f20d06ed
--- /dev/null
+++ b/resources/quality/mixware_vulcan/mixware_vulcan_draft.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+definition = mixware_vulcan
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = draft
+setting_version = 21
+type = quality
+
+[values]
+layer_height = 0.15
+layer_height_0 = 0.18
+
diff --git a/resources/quality/mixware_vulcan/mixware_vulcan_extra_fast.inst.cfg b/resources/quality/mixware_vulcan/mixware_vulcan_extra_fast.inst.cfg
new file mode 100644
index 0000000000..7dcafa3286
--- /dev/null
+++ b/resources/quality/mixware_vulcan/mixware_vulcan_extra_fast.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+definition = mixware_vulcan
+name = Coarse
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = coarse
+setting_version = 21
+type = quality
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+
diff --git a/resources/quality/mixware_vulcan/mixware_vulcan_normal.inst.cfg b/resources/quality/mixware_vulcan/mixware_vulcan_normal.inst.cfg
new file mode 100644
index 0000000000..a3327d6d82
--- /dev/null
+++ b/resources/quality/mixware_vulcan/mixware_vulcan_normal.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+definition = mixware_vulcan
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = normal
+setting_version = 21
+type = quality
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.12
+
diff --git a/resources/quality/mixware_wand/mixware_wand_draft.inst.cfg b/resources/quality/mixware_wand/mixware_wand_draft.inst.cfg
new file mode 100644
index 0000000000..293ca9ebbe
--- /dev/null
+++ b/resources/quality/mixware_wand/mixware_wand_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = mixware_wand
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = draft
+setting_version = 21
+type = quality
+
+[values]
+acceleration_travel = 500
+infill_before_walls = False
+layer_height = 0.15
+layer_height_0 = 0.18
+support_infill_rate = 20
+
diff --git a/resources/quality/mixware_wand/mixware_wand_extra_fast.inst.cfg b/resources/quality/mixware_wand/mixware_wand_extra_fast.inst.cfg
new file mode 100644
index 0000000000..52b9a48dfd
--- /dev/null
+++ b/resources/quality/mixware_wand/mixware_wand_extra_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = mixware_wand
+name = Coarse
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = coarse
+setting_version = 21
+type = quality
+
+[values]
+acceleration_travel = 500
+infill_before_walls = False
+layer_height = 0.2
+layer_height_0 = 0.2
+support_infill_rate = 20
+
diff --git a/resources/quality/mixware_wand/mixware_wand_normal.inst.cfg b/resources/quality/mixware_wand/mixware_wand_normal.inst.cfg
new file mode 100644
index 0000000000..a6f0aa56a3
--- /dev/null
+++ b/resources/quality/mixware_wand/mixware_wand_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = mixware_wand
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = normal
+setting_version = 21
+type = quality
+
+[values]
+acceleration_travel = 500
+infill_before_walls = False
+layer_height = 0.1
+layer_height_0 = 0.11
+support_infill_rate = 20
+
diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg
index 10760f39be..2439df8785 100644
--- a/resources/setting_visibility/expert.cfg
+++ b/resources/setting_visibility/expert.cfg
@@ -38,6 +38,7 @@ fill_outline_gaps
 xy_offset
 xy_offset_layer_0
 hole_xy_offset
+hole_xy_offset_max_diameter
 z_seam_type
 z_seam_position
 z_seam_x
@@ -58,6 +59,7 @@ top_bottom_pattern_0
 skin_monotonic
 connect_skin_polygons
 skin_angles
+small_skin_width
 skin_no_small_gaps_heuristic
 skin_outline_count
 ironing_enabled
@@ -302,11 +304,13 @@ adhesion_extruder_nr
 raft_surface_extruder_nr
 skirt_line_count
 skirt_gap
+skirt_height
 skirt_brim_minimal_length
 brim_width
 brim_gap
 brim_line_count
 brim_outside_only
+brim_smart_ordering
 raft_margin
 raft_smoothing
 raft_airgap