gMax 1.5+ Cura 3.5.1 Config

gMax 1.5+ Cura 3.5.1 Config updates

resources/definitions/gmax15plus.def.json

@@ -10,13 +10,16 @@
         "category": "Other",
         "file_formats": "text/x-gcode",
         "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl",
-        "has_machine_quality": true,
+		"has_machine_quality": true,
         "has_variants": true,
-        "variants_name": "Hotend",
+		"variants_name": "Hotend",
-        "preferred_variant_name": "0.5mm E3D (Default)",
+		"preferred_variant_name": "*0.5mm E3D (Default)*",
-        "machine_extruder_trains": {
+		"preferred_quality_type": "gmax15plus_global_normal",
+		"machine_extruder_trains": {
             "0": "gmax15plus_extruder_0"
         }
+		
+
     },
 
     "overrides": {
@@ -27,6 +30,8 @@
         "machine_depth": { "default_value": 406 },
         "machine_height": { "default_value": 533 },
         "machine_center_is_zero": { "default_value": false },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.5 },
         "layer_height": { "default_value": 0.2 },
         "layer_height_0": { "default_value": 0.3 },
         "retraction_amount": { "default_value": 1 },
@@ -43,7 +48,7 @@
         "machine_max_jerk_z": { "default_value": 0.4 },
         "machine_max_jerk_e": { "default_value": 5.0 },
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-       "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 ;Home X/Y/Z\nG29 ; Bed level\nM104 S{material_print_temperature} ; Preheat\nM109 S{material_print_temperature} ; Preheat\nG91 ;relative positioning\nG90 ;absolute positioning\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
+       "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} ; Preheat\nM109 S{material_print_temperature} ; Preheat\nG91 ;relative positioning\nG90 ;absolute positioning\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
         "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
 		"material_print_temperature": { "default_value": 202 },
 		"wall_thickness": { "default_value": 1 },

resources/definitions/gmax15plus_dual.def.json

@@ -11,13 +11,13 @@
         "file_formats": "text/x-gcode",
         "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl",
 		"has_variants": true,
-        "has_machine_quality": true,
 		"variants_name": "Hotend",
-		"preferred_variant_name": "0.5mm E3D (Default)",
+		"preferred_variant_name": "*0.5mm E3D (Default)*",
+		"preferred_quality_type": "gmax15plus_global_dual_normal",
 		"machine_extruder_trains": {
 			"0": "gmax15plus_dual_extruder_0",
 			"1": "gmax15plus_dual_extruder_1"
-        }
+			}
     },
 
     "overrides": {
@@ -28,6 +28,8 @@
         "machine_depth": { "default_value": 406 },
         "machine_height": { "default_value": 533 },
         "machine_center_is_zero": { "default_value": false },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.5 },
         "layer_height": { "default_value": 0.2 },
         "layer_height_0": { "default_value": 0.3 },
         "retraction_amount": { "default_value": 1 },
@@ -44,7 +46,7 @@
         "machine_max_jerk_z": { "default_value": 0.4 },
         "machine_max_jerk_e": { "default_value": 5.0 },
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 ;Home X/Y/Z\nG29 ; Bed level\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
+        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home X/Y/Z\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
         "machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
 		"material_print_temperature": { "default_value": 202 },
 		"wall_thickness": { "default_value": 1 },

resources/extruders/gmax15plus_dual_extruder_0.def.json

@@ -16,7 +16,7 @@
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
 		"machine_nozzle_size": { "default_value": 0.5 },
-        "material_diameter": { "default_value": 1.75 },
+		"material_diameter": { "default_value": 1.75 },
 		
 		"machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": 40 },

resources/extruders/gmax15plus_dual_extruder_1.def.json

@@ -16,7 +16,7 @@
         "machine_nozzle_offset_x": { "default_value": 0.0 },
         "machine_nozzle_offset_y": { "default_value": 0.0 },
 		"machine_nozzle_size": { "default_value": 0.5 },
-        "material_diameter": { "default_value": 1.75 },
+		"material_diameter": { "default_value": 1.75 },
 		
 		"machine_extruder_start_pos_abs": { "default_value": true },
         "machine_extruder_start_pos_x": { "value": 40 },

resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = normal
 weight = -1
+global_quality = True
 
 [values]
 layer_height = 0.2
@@ -64,7 +65,7 @@ ooze_shield_enabled = True
 prime_tower_enable = False
 prime_tower_position_x = 350
 prime_tower_position_y = 350
-prime_tower_min_volume = 18
+prime_tower_wall_thickness = 2
 switch_extruder_retraction_amount = 6
 switch_extruder_retraction_speeds = 60
 

resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = course
 weight = -2
+global_quality = True
 
 [values]
 layer_height = 0.28
@@ -64,7 +65,7 @@ ooze_shield_enabled = True
 prime_tower_enable = False
 prime_tower_position_x = 350
 prime_tower_position_y = 350
-prime_tower_min_volume = 18
+prime_tower_wall_thickness = 2
 switch_extruder_retraction_amount = 6
 switch_extruder_retraction_speeds = 60
 

resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = high
 weight = 0
+global_quality = True
 
 [values]
 layer_height = 0.16
@@ -64,7 +65,7 @@ ooze_shield_enabled = True
 prime_tower_enable = False
 prime_tower_position_x = 350
 prime_tower_position_y = 350
-prime_tower_min_volume = 18
+prime_tower_wall_thickness = 2
 switch_extruder_retraction_amount = 6
 switch_extruder_retraction_speeds = 60
 

resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = extra_course
 weight = -3
+global_quality = True
 
 [values]
 layer_height = 0.32
@@ -63,7 +64,7 @@ ooze_shield_enabled = True
 prime_tower_enable = False
 prime_tower_position_x = 350
 prime_tower_position_y = 350
-prime_tower_min_volume = 18
+prime_tower_wall_thickness = 2
 switch_extruder_retraction_amount = 6
 switch_extruder_retraction_speeds = 60
 

resources/quality/gmax15plus/gmax15plus_global_normal.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = normal
 weight = -1
+global_quality = True
 
 [values]
 layer_height = 0.2
@@ -57,3 +58,5 @@ top_thickness = 1
 bottom_layers = 2
 wall_line_count = 2
 z_seam_corner = z_seam_corner_none
+
+

resources/quality/gmax15plus/gmax15plus_global_thick.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = course
 weight = -2
+global_quality = True
 
 [values]
 layer_height = 0.28
@@ -56,4 +57,4 @@ top_layers = 3
 top_thickness = 1
 bottom_layers = 2
 wall_line_count = 2
-z_seam_corner = z_seam_corner_none
+z_seam_corner = z_seam_corner_none

resources/quality/gmax15plus/gmax15plus_global_thin.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = high
 weight = 0
+global_quality = True
 
 [values]
 layer_height = 0.16
@@ -56,4 +57,4 @@ top_layers = 5
 top_thickness = 1
 bottom_layers = 3
 wall_line_count = 2
-z_seam_corner = z_seam_corner_none
+z_seam_corner = z_seam_corner_none

resources/quality/gmax15plus/gmax15plus_global_very_thick.inst.cfg

@@ -8,6 +8,7 @@ setting_version = 5
 type = quality
 quality_type = extra_course
 weight = -3
+global_quality = True
 
 [values]
 layer_height = 0.32
@@ -55,4 +56,4 @@ top_layers = 3
 top_thickness = 1
 bottom_layers = 2
 wall_line_count = 2
-z_seam_corner = z_seam_corner_none
+z_seam_corner = z_seam_corner_none

resources/variants/gmax15plus_04_e3d.inst.cfg

@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.4
+machine_nozzle_size = 0.4

resources/variants/gmax15plus_05_e3d.inst.cfg

@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.5
+machine_nozzle_size = 0.5

resources/variants/gmax15plus_06_e3d.inst.cfg

@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.6
+machine_nozzle_size = 0.6

resources/variants/gmax15plus_08_e3d.inst.cfg

@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.8
+machine_nozzle_size = 0.8

resources/variants/gmax15plus_10_jhead.inst.cfg

@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.5
+machine_nozzle_size = 0.5

resources/variants/gmax15plus_12_e3d.inst.cfg

@@ -1,5 +1,5 @@
 [general]
-name = 0.25mm E3D (Difficult)
+name = 1.2mm E3D Volcano
 version = 4
 definition = gmax15plus
 
@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.25
+machine_nozzle_size = 1.2

resources/variants/gmax15plus_dual_025_e3d.inst.cfg

@@ -1,13 +0,0 @@
-[general]
-name = 0.25mm E3D (Difficult)
-version = 4
-definition = gmax15plus_dual
-
-[metadata]
-author = gcreate
-setting_version = 5
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.25

resources/variants/gmax15plus_dual_04_e3d.inst.cfg

@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.4
+machine_nozzle_size = 0.4

resources/variants/gmax15plus_dual_10_jhead.inst.cfg

@@ -10,4 +10,4 @@ type = variant
 hardware_type = nozzle
 
 [values]
-machine_nozzle_size = 0.5
+machine_nozzle_size = 1.0