diff --git a/resources/definitions/cocoon_create_touch.def.json b/resources/definitions/cocoon_create_touch.def.json
new file mode 100644
index 0000000000..da5905c047
--- /dev/null
+++ b/resources/definitions/cocoon_create_touch.def.json
@@ -0,0 +1,79 @@
+{
+    "name": "Cocoon Create Touch",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Thushan Fernando",
+        "manufacturer": "Cocoon Create",
+        "file_formats": "text/x-gcode",
+        "preferred_quality_type": "fine",
+        "has_materials": true,
+        "platform": "wanhao_200_200_platform.obj",
+        "platform_texture": "Cocoon-backplate.png",
+        "machine_extruder_trains": {
+            "0": "cocoon_create_touch_extruder_0"
+        },
+        "platform_offset": [
+          0,
+          -28,
+          0
+        ]
+    },
+    "overrides": {
+        "machine_name": {
+            "default_value": "Cocoon Create Touch"
+        },
+        "machine_width": {
+            "default_value": 200
+        },
+        "machine_height": {
+            "default_value": 180
+        },
+        "machine_depth": {
+            "default_value": 200
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode": {
+            "default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "layer_height": {
+            "default_value": 0.10
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "value": "0.8"
+        },
+        "top_bottom_thickness": {
+            "default_value": 0.6
+        },
+        "speed_print": {
+            "default_value": 50
+        },
+        "support_enable": {
+            "default_value": true
+        },
+        "retraction_enable": {
+            "default_value": true
+        },
+        "retraction_amount": {
+            "default_value": 4.5
+        },
+        "retraction_speed": {
+            "default_value": 25
+        }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/cocoon_create_touch_extruder_0.def.json b/resources/extruders/cocoon_create_touch_extruder_0.def.json
new file mode 100644
index 0000000000..ca7c3e38af
--- /dev/null
+++ b/resources/extruders/cocoon_create_touch_extruder_0.def.json
@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "cocoon_create_touch",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
diff --git a/resources/images/Cocoon-backplate.png b/resources/images/Cocoon-backplate.png
new file mode 100644
index 0000000000..577edfcf0d
Binary files /dev/null and b/resources/images/Cocoon-backplate.png differ