diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg
index 21249e7c1c..e8c18b8c6f 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file
diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg
index 0712198402..a05b9056c8 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file
diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg
index 3ed00059f6..7c785dc3d5 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file
diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg
index a5a013e4e2..cc336d36da 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 6
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg
index 9c75862a90..61917cabc2 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg
index a7f166b20b..e2a67b4786 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg
index ece298a822..3e49fd1bce 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg
index 37aebbb5dc..2e74066a5e 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg
@@ -13,4 +13,12 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-retraction_amount = 4.5
\ No newline at end of file
+support_pattern = everywhere
+support_pattern = grid
+support_infill_rate = 50
+support_brim_enable = True
+support_interface_enable = True
+support_enable = True
+retraction_enable = False
+retraction_amount = 1
+retraction_speed = 1
\ No newline at end of file