From 13726f1ec1444e1a5f0fc9bf35daee9060d3db31 Mon Sep 17 00:00:00 2001
From: Ghostkeeper <rubend@tutanota.com>
Date: Wed, 18 May 2016 10:24:18 +0200
Subject: [PATCH] Use default_value instead of default

D'oh.

Contributes to issue CURA-1278.
---
 .../definitions/ultimaker_original.def.json   | 28 +++++++++----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/resources/definitions/ultimaker_original.def.json b/resources/definitions/ultimaker_original.def.json
index 8f47962be9..cd2fac4599 100644
--- a/resources/definitions/ultimaker_original.def.json
+++ b/resources/definitions/ultimaker_original.def.json
@@ -19,29 +19,29 @@
 
     "overrides": {
         "machine_width": {
-            "default": 205
+            "default_value": 205
         },
         "machine_height": {
-            "default": 200
+            "default_value": 200
         },
         "machine_depth": {
-            "default": 205
+            "default_value": 205
         },
         "machine_center_is_zero": {
-            "default": false
+            "default_value": false
         },
         "machine_nozzle_size": {
-            "default": 0.4
+            "default_value": 0.4
         },
         "machine_nozzle_heat_up_speed": {
-            "default": 2
+            "default_value": 2
         },
         "machine_nozzle_cool_down_speed": {
-            "default": 2
+            "default_value": 2
         },
         "machine_head_with_fans_polygon":
         {
-            "default": [
+            "default_value": [
                 [ -75, 35 ],
                 [ -75, -18 ],
                 [ 18, 35 ],
@@ -49,22 +49,22 @@
             ]
         },
         "gantry_height": {
-            "default": 55
+            "default_value": 55
         },
         "machine_use_extruder_offset_to_offset_coords": {
-            "default": true
+            "default_value": true
         },
         "machine_gcode_flavor": {
-            "default": "RepRap (Marlin/Sprinter)"
+            "default_value": "RepRap (Marlin/Sprinter)"
         },
         "machine_start_gcode": {
-            "default": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
         },
         "machine_end_gcode": {
-            "default": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
         },
         "machine_extruder_drive_upgrade": {
-            "default": false
+            "default_value": false
         }
     }
 }