diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_A.inst.cfg new file mode 100644 index 0000000000..c84f3a55a0 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_A.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = a +weight = 1 +material = emotiontech_absx +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 35/50) +speed_wall_0 = =math.ceil(speed_wall * 30/35) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 20/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 19 * layer_height +cool_min_speed = 10 +support_angle = 65 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_B.inst.cfg new file mode 100644 index 0000000000..112901259c --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_B.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = b +weight = 0 +material = emotiontech_absx +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 37/55) +speed_wall_0 = =math.ceil(speed_wall * 33/37) +speed_topbottom = =math.ceil(speed_print * 37/55) +speed_layer_0 = =math.ceil(speed_print * 25/55) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 14 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 96 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_C.inst.cfg new file mode 100644 index 0000000000..aa4724a194 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS-X_C.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = c +weight = -1 +material = emotiontech_absx +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 40/60) +speed_wall_0 = =math.ceil(speed_wall * 35/40) +speed_topbottom = =math.ceil(speed_print * 40/60) +speed_layer_0 = =math.ceil(speed_print * 30/60) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 9 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_flow = 91 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg index eea25cd005..3293ed6efc 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg @@ -31,7 +31,7 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 19 * layer_height cool_min_speed = 10 support_angle = 65 -material_print_temperature = =default_material_print_temperature +material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature material_flow = 100 retraction_extra_prime_amount = 0.1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg index e3ec81a05a..6681b202f2 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg @@ -31,8 +31,8 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height cool_min_speed = 10 support_angle = 60 -material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature + 1 material_flow = 96 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg index 64332260dc..22be0549f7 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg @@ -31,8 +31,8 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height cool_min_speed = 10 support_angle = 55 -material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +3 material_flow = 91 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_A.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg rename to resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_A.inst.cfg index d7786d1140..8718717427 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_A.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = a weight = 1 -material = emotiontech_pva-oks +material = emotiontech_bvoh variant = Standard 0.4 [values] diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_B.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg rename to resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_B.inst.cfg index 82b9ca45d8..0b3c65b21e 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_B.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = b weight = 0 -material = emotiontech_pva-oks +material = emotiontech_bvoh variant = Standard 0.4 [values] diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_C.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg rename to resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_C.inst.cfg index 2bf2298037..2f2fb0cb23 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_BVOH_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = c weight = -1 -material = emotiontech_pva-oks +material = emotiontech_bvoh variant = Standard 0.4 [values] diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_B.inst.cfg new file mode 100644 index 0000000000..e7eb63f56f --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_B.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = b +weight = 1 +material = emotiontech_absx +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 27/43) +speed_topbottom = =math.ceil(speed_print * 33/50) +speed_layer_0 = =math.ceil(speed_print * 20/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_C.inst.cfg new file mode 100644 index 0000000000..da307fb128 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_C.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = c +weight = 0 +material = emotiontech_absx +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 40/55) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/55) +speed_layer_0 = =math.ceil(speed_print * 23/55) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 98 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_D.inst.cfg new file mode 100644 index 0000000000..5620efde6f --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS-X_D.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = d +weight = -1 +material = emotiontech_absx +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 43/60) +speed_wall_0 = =math.ceil(speed_wall * 33/43) +speed_topbottom = =math.ceil(speed_print * 37/60) +speed_layer_0 = =math.ceil(speed_print * 25/60) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_flow = 96 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg index af9a40ba92..707585110a 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg @@ -31,7 +31,7 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height cool_min_speed = 10 support_angle = 55 -material_print_temperature = =default_material_print_temperature +material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature material_flow = 100 retraction_extra_prime_amount = 0.1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg index 95c98200db..04ecf0726e 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg @@ -31,8 +31,8 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height cool_min_speed = 10 support_angle = 50 -material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature + 1 material_flow = 98 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg index 902ae5cbb2..bd780f69d4 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg @@ -31,8 +31,8 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height cool_min_speed = 10 support_angle = 45 -material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 material_flow = 96 retraction_extra_prime_amount = 0.1 retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_B.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg rename to resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_B.inst.cfg index 20998117ed..5f975177ee 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_B.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = b weight = 1 -material = emotiontech_pva-oks +material = emotiontech_bvoh variant = Standard 0.6 [values] diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_C.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg rename to resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_C.inst.cfg index d89d0b4210..3e936e0464 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = c weight = 0 -material = emotiontech_pva-oks +material = emotiontech_bvoh variant = Standard 0.6 [values] diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_D.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg rename to resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_D.inst.cfg index db3c1b14f1..871fddc493 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_BVOH_D.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = d weight = -1 -material = emotiontech_pva-oks +material = emotiontech_bvoh variant = Standard 0.6 [values] diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_C.inst.cfg new file mode 100644 index 0000000000..905d79e290 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_C.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = c +weight = 1 +material = emotiontech_absx +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 30/37) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature + 1 +material_flow = 97 +retraction_extra_prime_amount = 0.5 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =layer_height +support_xy_distance = =line_width * 2 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_D.inst.cfg new file mode 100644 index 0000000000..deab8f5d4b --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_D.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = d +weight = 0 +material = emotiontech_absx +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 30/37) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 7 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 96 +retraction_extra_prime_amount = 0.5 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =layer_height +support_xy_distance = =line_width * 2 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_E.inst.cfg new file mode 100644 index 0000000000..176d70d9b4 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS-X_E.inst.cfg @@ -0,0 +1,47 @@ +[general] +version = 4 +name = E +definition = strateo3d + +[metadata] +setting_version = 15 +type = quality +quality_type = e +weight = -1 +material = emotiontech_absx +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 30/37) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_flow = 95 +retraction_extra_prime_amount = 0.5 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =layer_height +support_xy_distance = =line_width * 2 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg index 02b6a0b3a3..1f29bc27c2 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg @@ -31,7 +31,7 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height cool_min_speed = 10 support_angle = 55 -material_print_temperature = =default_material_print_temperature +material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature material_flow = 97 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg index 1f47f7fd1d..0faf7d8eda 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg @@ -32,7 +32,7 @@ cool_fan_full_at_height = =layer_height_0 + 6 * layer_height cool_min_speed = 10 support_angle = 50 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_flow = 96 retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg index 6575d4f85a..f15eb9a2a9 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg @@ -31,8 +31,8 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 6 * layer_height cool_min_speed = 10 support_angle = 45 -material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_print_temperature = =default_material_print_temperature + 7 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 material_flow = 95 retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_C.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg rename to resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_C.inst.cfg index 60e2886254..4560253546 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_C.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = c weight = 1 -material = emotiontech_pvaoks +material = emotiontech_bvoh variant = Standard 0.8 [values] diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_D.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg rename to resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_D.inst.cfg index fc52f09138..d69181eadf 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_D.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = d weight = 0 -material = emotiontech_pvaoks +material = emotiontech_bvoh variant = Standard 0.8 [values] diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_E.inst.cfg similarity index 98% rename from resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg rename to resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_E.inst.cfg index 64d87ffd0b..a672e2d39f 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_BVOH_E.inst.cfg @@ -8,7 +8,7 @@ setting_version = 15 type = quality quality_type = e weight = -1 -material = emotiontech_pvaoks +material = emotiontech_bvoh variant = Standard 0.8 [values]