diff --git a/resources/definitions/printrbot_simple.def.json b/resources/definitions/printrbot_simple.def.json
index 7c86617ce5..e56a9d8647 100644
--- a/resources/definitions/printrbot_simple.def.json
+++ b/resources/definitions/printrbot_simple.def.json
@@ -32,7 +32,7 @@
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
 
         "machine_start_gcode": {
-            "default_value": "G21       ;metric values\nG90       ;absolute positioning\nM82       ;set extruder to absolute mode\nM107      ;start with the fan off\nG28 X0 Y0 ;home X/Y\nG28 Z0    ;home Z\nG92 E0    ;zero the extruded length\nG29       ;initiate auto bed leveling sequence\nG92 X132.4 Y20 ;correct bed origin (G29 changes it)"
+            "default_value": "G21       ;metric values\nG90       ;absolute positioning\nM82       ;set extruder to absolute mode\nM107      ;start with the fan off\nG28 X0 Y0 ;home X/Y\nG28 Z0    ;home Z\nG92 E0    ;zero the extruded length\nG29       ;initiate auto bed leveling sequence"
         },
         "machine_end_gcode": {
             "default_value": "M104 S0     ;extruder heater off\nM140 S0     ;heated bed heater off (if you have it)\nM106 S0     ;fan off\nG91         ;relative positioning\nG1 E-1 F300 ;retract the filament a bit\nG1 Z+1 E-5 F9000 ;move Z up a bit and retract even more\nG28 X0 Y0   ;home X/Y, so the head is out of the way\nM84         ;steppers off\nG90         ;absolute positioning"