Merge branch 'master' into fix_grouping_below_build_plate

2025-04-28 14:54:27 +08:00 · 2020-12-07 14:27:06 +01:00 · 2020-12-07 14:27:06 +01:00 · 19d432e50f
commit 19d432e50f
parent 99c12de6b0 f18c274825
39 changed files with 92 additions and 99 deletions
--- a/plugins/PostProcessingPlugin/scripts/TimeLapse.py
+++ b/plugins/PostProcessingPlugin/scripts/TimeLapse.py
@ -66,6 +66,22 @@ class TimeLapse(Script):
                    "type": "float",
                    "default_value": 9000,
                    "enabled": "park_print_head"
+                },
+                "retract":
+                {
+                    "label": "Retraction Distance",
+                    "description": "Filament retraction distance for camera trigger.",
+                    "unit": "mm",
+                    "type": "int",
+                    "default_value": 0
+                },
+                "zhop":
+                {
+                    "label": "Z-Hop Height When Parking",
+                    "description": "Z-hop length before parking",
+                    "unit": "mm",
+                    "type": "float",
+                    "default_value": 0
                }
            }
        }"""
@ -77,9 +93,12 @@ class TimeLapse(Script):
        y_park = self.getSettingValueByKey("head_park_y")
        trigger_command = self.getSettingValueByKey("trigger_command")
        pause_length = self.getSettingValueByKey("pause_length")
+        retract = int(self.getSettingValueByKey("retract"))
+        zhop = self.getSettingValueByKey("zhop")
        gcode_to_append = ";TimeLapse Begin\n"
        last_x = 0
        last_y = 0
+        last_z = 0

        if park_print_head:
            gcode_to_append += self.putValue(G=1, F=feed_rate,
@ -90,16 +109,35 @@ class TimeLapse(Script):

        for idx, layer in enumerate(data):
            for line in layer.split("\n"):
-                if self.getValue(line, "G") in {0, 1}:  # Track X,Y location.
+                if self.getValue(line, "G") in {0, 1}:  # Track X,Y,Z location.
                    last_x = self.getValue(line, "X", last_x)
                    last_y = self.getValue(line, "Y", last_y)
+                    last_z = self.getValue(line, "Z", last_z)
            # Check that a layer is being printed
            lines = layer.split("\n")
            for line in lines:
                if ";LAYER:" in line:
+                    if retract != 0: # Retract the filament so no stringing happens
+                        layer += self.putValue(M=83) + " ;Extrude Relative\n"
+                        layer += self.putValue(G=1, E=-retract, F=3000) + " ;Retract filament\n"
+                        layer += self.putValue(M=82) + " ;Extrude Absolute\n"
+                        layer += self.putValue(M=400) + " ;Wait for moves to finish\n" # Wait to fully retract before hopping
+
+                    if zhop != 0:
+                        layer += self.putValue(G=1, Z=last_z+zhop, F=3000) + " ;Z-Hop\n"
+
                    layer += gcode_to_append

-                    layer += "G0 X%s Y%s\n" % (last_x, last_y)
+                    if zhop != 0:
+                        layer += self.putValue(G=0, X=last_x, Y=last_y, Z=last_z) + "; Restore position \n"
+                    else:
+                        layer += self.putValue(G=0, X=last_x, Y=last_y) + "; Restore position \n"
+
+                    if retract != 0:
+                        layer += self.putValue(M=400) + " ;Wait for moves to finish\n"
+                        layer += self.putValue(M=83) + " ;Extrude Relative\n"
+                        layer += self.putValue(G=1, E=retract, F=3000) + " ;Retract filament\n"
+                        layer += self.putValue(M=82) + " ;Extrude Absolute\n"

                    data[idx] = layer
                    break
--- a/plugins/Toolbox/src/AuthorsModel.py
+++ b/plugins/Toolbox/src/AuthorsModel.py
@ -2,7 +2,7 @@
 # Cura is released under the terms of the LGPLv3 or higher.

 import re
-from typing import Dict, List, Optional, Union
+from typing import Dict, List, Optional, Union, cast

 from PyQt5.QtCore import Qt, pyqtProperty

@ -68,7 +68,7 @@ class AuthorsModel(ListModel):
        # Execute all filters.
        filtered_items = list(items)

-        filtered_items.sort(key = lambda k: k["name"])
+        filtered_items.sort(key = lambda k: cast(str, k["name"]))
        self.setItems(filtered_items)

    def setFilter(self, filter_dict: Dict[str, str]) -> None:
--- a/resources/definitions/SV01.def.json
+++ b/resources/definitions/SV01.def.json
@ -65,6 +65,6 @@
        "retraction_speed": { "default_value": 50},
        "adhesion_type": { "value": "'skirt'" },
        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }
    }
-}
+}
--- a/resources/definitions/anycubic_mega_zero.def.json
+++ b/resources/definitions/anycubic_mega_zero.def.json
@ -59,7 +59,7 @@
        },
        "machine_end_gcode":
        {
-            "default_value": "M117 Cooling down...\nM104 S0 ; turn off extruder\nM84 ; disable motors\nM107 ; Fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n"
+            "default_value": "M117 Cooling down...\nM104 S0 ; turn off extruder\nM84 ; disable motors\nM107 ; Fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positioning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n"
        },
        "machine_max_feedrate_x": { "value": 500 },
        "machine_max_feedrate_y": { "value": 500 },
--- a/resources/definitions/biqu_base.def.json
+++ b/resources/definitions/biqu_base.def.json
@ -25,7 +25,7 @@
    "overrides": {
        "machine_name": { "default_value": "BIQU Base Printer" },
        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
-        "machine_end_gcode": { "default_value": "                               ;BIQU Default End Gcode\nG91                            ;Relative positioning\nG1 E-2 F2700                   ;Retract a bit\nG1 E-2 Z0.2 F2400              ;Retract a bit more and raise Z\nG1 X5 Y5 F3000                 ;Wipe out\nG1 Z10                         ;Raise Z by 10mm\nG90                            ;Return to absolute positionning\n\nG1 X0 Y{machine_depth}         ;TaDaaaa\nM106 S0                        ;Turn-off fan\nM104 S0                        ;Turn-off hotend\nM140 S0                        ;Turn-off bed\n\nM84 X Y E                      ;Disable all steppers but Z\n" },
+        "machine_end_gcode": { "default_value": "                               ;BIQU Default End Gcode\nG91                            ;Relative positioning\nG1 E-2 F2700                   ;Retract a bit\nG1 E-2 Z0.2 F2400              ;Retract a bit more and raise Z\nG1 X5 Y5 F3000                 ;Wipe out\nG1 Z10                         ;Raise Z by 10mm\nG90                            ;Return to absolute positioning\n\nG1 X0 Y{machine_depth}         ;TaDaaaa\nM106 S0                        ;Turn-off fan\nM104 S0                        ;Turn-off hotend\nM140 S0                        ;Turn-off bed\n\nM84 X Y E                      ;Disable all steppers but Z\n" },

        "machine_max_feedrate_x": { "value": 500 },
        "machine_max_feedrate_y": { "value": 500 },
--- a/resources/definitions/creality_base.def.json
+++ b/resources/definitions/creality_base.def.json
@ -125,7 +125,7 @@
    "overrides": {
        "machine_name": { "default_value": "Creawsome Base Printer" },
        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },

        "machine_max_feedrate_x": { "value": 500 },
        "machine_max_feedrate_y": { "value": 500 },
--- a/resources/definitions/creality_ender5.def.json
+++ b/resources/definitions/creality_ender5.def.json
@ -4,7 +4,7 @@
    "inherits": "creality_base",
    "overrides": {
        "machine_name": { "default_value": "Creality Ender-5" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
        "machine_width": { "default_value": 220 },
        "machine_depth": { "default_value": 220 },
        "machine_height": { "default_value": 300 },
@ -25,4 +25,4 @@
        "quality_definition": "creality_base",
        "visible": true
    }
-}
+}
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@ -873,7 +873,7 @@
                            "default_value": 0.4,
                            "type": "float",
                            "value": "line_width",
-                            "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable')",
+                            "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('prime_tower_brim_enable') or resolveOrValue('draft_shield_enabled') or resolveOrValue('ooze_shield_enabled')",
                            "settable_per_mesh": false,
                            "settable_per_extruder": true
                        },
@ -2614,7 +2614,7 @@
                            "minimum_value": "5",
                            "minimum_value_warning": "50",
                            "maximum_value_warning": "150",
-                            "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim'",
+                            "enabled": "resolveOrValue('adhesion_type') == 'skirt' or resolveOrValue('adhesion_type') == 'brim' or resolveOrValue('draft_shield_enabled') or resolveOrValue('ooze_shield_enabled')",
                            "settable_per_mesh": false,
                            "settable_per_extruder": true
                        },
@ -6161,7 +6161,7 @@
                "infill_mesh_order":
                {
                    "label": "Mesh Processing Rank",
-                    "description": "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes.",
+                    "description": "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes.",
                    "default_value": 0,
                    "value": "1 if infill_mesh else 0",
                    "minimum_value_warning": "1",
--- a/resources/definitions/flyingbear_base.def.json
+++ b/resources/definitions/flyingbear_base.def.json
@ -152,7 +152,7 @@

        "machine_start_gcode": { "default_value": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\n;Code for nozzle cleaning and flow normalization\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.4 Y20 Z0.28 F5000.0\nG1 X10.4 Y170.0 Z0.28 F1500.0 E15\nG1 X10.1 Y170.0 Z0.28 F5000.0\nG1 X10.1 Y40 Z0.28 F1500.0 E30\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },

-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract the filament\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG28 X0 Y0 ;Home X and Y\n\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract the filament\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG28 X0 Y0 ;Home X and Y\n\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z" },

        "machine_heated_bed": { "default_value": true },
        "machine_shape": { "default_value": "rectangular" },
@ -256,4 +256,4 @@
        "adaptive_layer_height_variation": { "value": 0.04 },
        "adaptive_layer_height_variation_step": { "value": 0.04 }
   }
-}
+}
--- a/resources/definitions/lotmaxx_sc60.def.json
+++ b/resources/definitions/lotmaxx_sc60.def.json
@ -20,7 +20,7 @@
          "default_value":"G28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"
        },
        "machine_end_gcode":{
-          "default_value":"G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n"
+          "default_value":"G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n"
        },
        "acceleration_print":{"value":1000},
        "acceleration_travel":{"value":1000},
--- a/resources/definitions/twotrees_bluer.def.json
+++ b/resources/definitions/twotrees_bluer.def.json
@ -30,7 +30,7 @@
 			]
 		},
 		"machine_start_gcode": { "default_value": "; Two Trees Bluer Custom Start G-code\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 E10 F1500 ;Purge a bit\nG1 X10.1 Y20 Z0.2 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.2 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.2 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.2 F1500.0 E20 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z3.0 X20 Y20 F3000 ;Move Z Axis up\nG1 E3 F2700 ;Purge a bit"	},
-		"machine_end_gcode": { "default_value": "; Two Trees Bluer Custom End G-code\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
+		"machine_end_gcode": { "default_value": "; Two Trees Bluer Custom End G-code\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
 		"gantry_height": { "value": 25 }
 	}
 }
--- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg
@ -17,8 +17,7 @@ acceleration_travel = 3000
 adhesion_type = skirt
 brim_width = 4.0
 cool_fan_full_at_height = 0.5
-cool_fan_speed = 100
-cool_fan_speed_0 = 100
+cool_fan_speed_max = 100
 infill_overlap = 15
 infill_pattern = zigzag
 infill_sparse_density = 25
@ -28,10 +27,7 @@ jerk_print = 8
 jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
-material_bed_temperature = 60
 material_diameter = 1.75
-material_print_temperature = 200
-material_print_temperature_layer_0 = 0
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075
--- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg
@ -17,8 +17,7 @@ acceleration_travel = 3000
 adhesion_type = skirt
 brim_width = 4.0
 cool_fan_full_at_height = 0.5
-cool_fan_speed = 100
-cool_fan_speed_0 = 100
+cool_fan_speed_max = 100
 infill_overlap = 15
 infill_pattern = zigzag
 infill_sparse_density = 25
@ -28,10 +27,7 @@ jerk_print = 8
 jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
-material_bed_temperature = 60
 material_diameter = 1.75
-material_print_temperature = 200
-material_print_temperature_layer_0 = 0
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075
--- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg
@ -17,8 +17,7 @@ acceleration_travel = 3000
 adhesion_type = skirt
 brim_width = 4.0
 cool_fan_full_at_height = 0.5
-cool_fan_speed = 100
-cool_fan_speed_0 = 100
+cool_fan_speed_max = 100
 infill_overlap = 15
 infill_pattern = zigzag
 infill_sparse_density = 25
@ -28,10 +27,7 @@ jerk_print = 8
 jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
-material_bed_temperature = 60
 material_diameter = 1.75
-material_print_temperature = 200
-material_print_temperature_layer_0 = 0
 retract_at_layer_change = False
 retraction_amount = 6
 retraction_hop = 0.075
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
@ -19,7 +19,7 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
@ -33,6 +33,5 @@ switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
-raft_airgap = 0.4
 raft_surface_speed = 45
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 skin_overlap = 20
 speed_print = 60
-speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
@ -30,4 +30,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 50 / 60)

 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 speed_print = 60
-speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 45 / 60)

 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 speed_print = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)

@ -28,4 +28,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 50)

 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 speed_print = 55
-speed_layer_0 = =math.ceil(speed_print * 20 / 55)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)

@ -27,4 +27,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 55)

 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@ -23,13 +23,13 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
@ -37,6 +37,4 @@ wall_line_width_x = =wall_line_width

 jerk_travel = 50

-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@ -23,13 +23,13 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
@ -37,6 +37,4 @@ wall_line_width_x = =wall_line_width

 jerk_travel = 50

-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@ -22,13 +22,13 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
@ -36,6 +36,4 @@ wall_line_width_x = =wall_line_width

 jerk_travel = 50

-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@ -22,13 +22,13 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
@ -36,6 +36,4 @@ wall_line_width_x = =wall_line_width

 jerk_travel = 50

-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
@ -35,4 +35,3 @@ acceleration_wall = 2000
 acceleration_wall_0 = 2000

 raft_airgap = 0.25
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 speed_print = 70
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
@ -31,4 +31,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2

 raft_airgap = 0.25
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@ -22,7 +22,7 @@ material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
 speed_print = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
@ -33,4 +33,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2

 raft_airgap = 0.25
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 top_bottom_thickness = 1
 wall_thickness = 1

@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2

 raft_airgap = 0.25
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 skin_overlap = 20
 speed_print = 60
-speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
@ -30,4 +30,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 50 / 60)

 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 speed_print = 60
-speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 45 / 60)

 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15
 material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 speed_print = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)

@ -28,4 +28,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 50)

 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
@ -19,11 +19,10 @@ material_initial_print_temperature = =material_print_temperature - 15
 material_final_print_temperature = =material_print_temperature - 20
 prime_tower_enable = False
 speed_print = 55
-speed_layer_0 = =math.ceil(speed_print * 20 / 55)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)

 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 55)
 raft_airgap = 0.15
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@ -23,19 +23,17 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width

 jerk_travel = 50
-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@ -23,19 +23,17 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width

 jerk_travel = 50
-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@ -22,19 +22,17 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width

 jerk_travel = 50
-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@ -22,19 +22,17 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
-raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width

 jerk_travel = 50
-raft_airgap = 0.4
 raft_surface_speed = 45
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@ -21,7 +21,7 @@ material_standby_temperature = 100
 prime_tower_enable = False
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
@ -35,4 +35,3 @@ layer_height_0 = 0.2
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
 raft_airgap = 0.25
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 speed_print = 70
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
@ -30,4 +30,3 @@ jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
 raft_airgap = 0.25
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@ -22,7 +22,7 @@ material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
 speed_print = 50
-speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
@ -32,4 +32,3 @@ jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
 raft_airgap = 0.25
-speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
-speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_layer_0 = 10
 top_bottom_thickness = 1
 wall_thickness = 1

@ -28,4 +28,3 @@ jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
 raft_airgap = 0.25
-speed_layer_0 = 10