diff --git a/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_coarse.inst.cfg
new file mode 100644
index 0000000000..091d369cb2
--- /dev/null
+++ b/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_coarse.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Coarse
+definition = imade3d_jellybox
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = fast
+weight = -1
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+speed_print = 45
diff --git a/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_fine.inst.cfg b/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_fine.inst.cfg
new file mode 100644
index 0000000000..e27825b799
--- /dev/null
+++ b/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_fine.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Fine
+definition = imade3d_jellybox
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+speed_print = 50  
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_normal.inst.cfg b/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_medium.inst.cfg
similarity index 65%
rename from resources/quality/imade3d_jellybox/imade3d_jellybox_normal.inst.cfg
rename to resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_medium.inst.cfg
index 380c3ad8c2..cb308dd5c2 100644
--- a/resources/quality/imade3d_jellybox/imade3d_jellybox_normal.inst.cfg
+++ b/resources/quality/imade3d_jellybox/PETG/jbo_generic_petg_0.4_medium.inst.cfg
@@ -8,9 +8,8 @@ setting_version = 8
 type = quality
 quality_type = normal
 weight = 0
-global_quality = True
+material = generic_petg
+variant = 0.4 mm
 
 [values]
-adhesion_type = skirt
-layer_height = 0.2
-layer_height_0 = 0.3
+speed_print = 45
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_coarse.inst.cfg b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_coarse.inst.cfg
similarity index 64%
rename from resources/quality/imade3d_jellybox/imade3d_jellybox_coarse.inst.cfg
rename to resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_coarse.inst.cfg
index 35ae151dbf..1968297bf9 100644
--- a/resources/quality/imade3d_jellybox/imade3d_jellybox_coarse.inst.cfg
+++ b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_coarse.inst.cfg
@@ -8,9 +8,8 @@ setting_version = 8
 type = quality
 quality_type = fast
 weight = -1
-global_quality = True
+material = generic_pla
+variant = 0.4 mm
 
 [values]
-adhesion_type = skirt
-layer_height = 0.3
-layer_height_0 = 0.3
+speed_print = 45
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_fine.inst.cfg b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_fine.inst.cfg
similarity index 64%
rename from resources/quality/imade3d_jellybox/imade3d_jellybox_fine.inst.cfg
rename to resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_fine.inst.cfg
index fe9ecd3326..300036d1af 100644
--- a/resources/quality/imade3d_jellybox/imade3d_jellybox_fine.inst.cfg
+++ b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_fine.inst.cfg
@@ -8,9 +8,8 @@ setting_version = 8
 type = quality
 quality_type = high
 weight = 1
-global_quality = True
+material = generic_pla
+variant = 0.4 mm
 
 [values]
-adhesion_type = skirt
-layer_height = 0.1
-layer_height_0 = 0.3
+speed_print = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_medium.inst.cfg
new file mode 100644
index 0000000000..9af8124d76
--- /dev/null
+++ b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_medium.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Medium
+definition = imade3d_jellybox
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+speed_print = 45
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_ultrafine.inst.cfg
similarity index 65%
rename from resources/quality/imade3d_jellybox/imade3d_jellybox_ultrafine.inst.cfg
rename to resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_ultrafine.inst.cfg
index a19a90a694..6ec63159d9 100644
--- a/resources/quality/imade3d_jellybox/imade3d_jellybox_ultrafine.inst.cfg
+++ b/resources/quality/imade3d_jellybox/PLA/jbo_generic_pla_0.4_ultrafine.inst.cfg
@@ -8,9 +8,8 @@ setting_version = 8
 type = quality
 quality_type = ultrahigh
 weight = 2
-global_quality = True
+material = generic_pla
+variant = 0.4 mm
 
 [values]
-adhesion_type = skirt
-layer_height = 0.05
-layer_height_0 = 0.3
+speed_print = 55
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg
deleted file mode 100644
index 26dc153acc..0000000000
--- a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg
+++ /dev/null
@@ -1,55 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = fast
-weight = -1
-material = generic_petg
-variant = 0.4 mm
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 1.2
-cool_fan_speed_max = 60
-cool_fan_speed_min = 20
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_bed_temperature = 50
-material_bed_temperature_layer_0 = 55
-material_flow = 100
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 25
-retraction_retract_speed = 35
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 25
-skirt_line_count = 2
-speed_layer_0 = =math.ceil(speed_print * 14 / 40)
-speed_print = 40
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 20 / 40)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 40)
-speed_wall_x = =math.ceil(speed_print * 35 / 40)
-top_thickness = =top_bottom_thickness
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg
deleted file mode 100644
index 2b4fa56e77..0000000000
--- a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg
+++ /dev/null
@@ -1,55 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = fast
-weight = -1
-material = generic_petg
-variant = 0.4 mm 2-fans
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 1.2
-cool_fan_speed_max = 40
-cool_fan_speed_min = 20
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_bed_temperature = 50
-material_bed_temperature_layer_0 = 55
-material_flow = 100
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 25
-retraction_retract_speed = 35
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 25
-skirt_line_count = 2
-speed_layer_0 = =math.ceil(speed_print * 14 / 40)
-speed_print = 40
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 20 / 40)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 40)
-speed_wall_x = =math.ceil(speed_print * 35 / 40)
-top_thickness = =top_bottom_thickness
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg
deleted file mode 100644
index 4bfaecdd15..0000000000
--- a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg
+++ /dev/null
@@ -1,55 +0,0 @@
-[general]
-version = 4
-name = Medium
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = normal
-weight = 0
-material = generic_petg
-variant = 0.4 mm
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 1.2
-cool_fan_speed_max = 60
-cool_fan_speed_min = 20
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_bed_temperature = 50
-material_bed_temperature_layer_0 = 55
-material_flow = 100
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 25
-retraction_retract_speed = 35
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 25
-skirt_line_count = 2
-speed_layer_0 = =math.ceil(speed_print * 14 / 40)
-speed_print = 40
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 20 / 40)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 40)
-speed_wall_x = =math.ceil(speed_print * 35 / 40)
-top_thickness = =top_bottom_thickness
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg
deleted file mode 100644
index bdc6c90b34..0000000000
--- a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg
+++ /dev/null
@@ -1,55 +0,0 @@
-[general]
-version = 4
-name = Medium
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = normal
-weight = 0
-material = generic_petg
-variant = 0.4 mm 2-fans
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 1.2
-cool_fan_speed_max = 40
-cool_fan_speed_min = 20
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_bed_temperature = 50
-material_bed_temperature_layer_0 = 55
-material_flow = 100
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 25
-retraction_retract_speed = 35
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 25
-skirt_line_count = 2
-speed_layer_0 = =math.ceil(speed_print * 14 / 40)
-speed_print = 40
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 20 / 40)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 40)
-speed_wall_x = =math.ceil(speed_print * 35 / 40)
-top_thickness = =top_bottom_thickness
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg
deleted file mode 100644
index d7cc2a796b..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg
+++ /dev/null
@@ -1,53 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = fast
-weight = -1
-material = generic_pla
-variant = 0.4 mm
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 50
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg
deleted file mode 100644
index e248c0f689..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg
+++ /dev/null
@@ -1,53 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = fast
-weight = -1
-material = generic_pla
-variant = 0.4 mm 2-fans
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 20
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg
deleted file mode 100644
index 6f755afd57..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg
+++ /dev/null
@@ -1,54 +0,0 @@
-[general]
-version = 4
-name = Fine
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = high
-weight = 1
-material = generic_pla
-variant = 0.4 mm
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 50
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-material_print_temperature = 205
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg
deleted file mode 100644
index 92f761833d..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg
+++ /dev/null
@@ -1,54 +0,0 @@
-[general]
-version = 4
-name = Fine
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = high
-weight = 1
-material = generic_pla
-variant = 0.4 mm 2-fans
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 20
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-material_print_temperature = 205
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg
deleted file mode 100644
index 22e9f018cc..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg
+++ /dev/null
@@ -1,53 +0,0 @@
-[general]
-version = 4
-name = Medium
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = normal
-weight = 0
-material = generic_pla
-variant = 0.4 mm
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 50
-cool_min_layer_time = 7
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg
deleted file mode 100644
index 30d15dc4e4..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg
+++ /dev/null
@@ -1,53 +0,0 @@
-[general]
-version = 4
-name = Medium
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = normal
-weight = 0
-material = generic_pla
-variant = 0.4 mm 2-fans
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 20
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg
deleted file mode 100644
index c3a35dd2cb..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg
+++ /dev/null
@@ -1,55 +0,0 @@
-[general]
-version = 4
-name = UltraFine
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = ultrahigh
-weight = 2
-material = generic_pla
-variant = 0.4 mm
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 50
-cool_min_layer_time = 5
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-material_print_temperature = 202
-material_print_temperature_layer_0 = 210
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg
deleted file mode 100644
index c9a31ef531..0000000000
--- a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg
+++ /dev/null
@@ -1,55 +0,0 @@
-[general]
-version = 4
-name = UltraFine
-definition = imade3d_jellybox
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = ultrahigh
-weight = 2
-material = generic_pla
-variant = 0.4 mm 2-fans
-
-[values]
-adhesion_type = skirt
-bottom_thickness = 0.6
-coasting_enable = True
-coasting_speed = 95
-cool_fan_full_at_height = 0.65
-cool_fan_speed_max = 100
-cool_fan_speed_min = 20
-cool_min_layer_time = 4
-cool_min_layer_time_fan_speed_max = 10
-cool_min_speed = 10
-infill_before_walls = False
-infill_line_width = 0.6
-infill_overlap = 15
-infill_pattern = zigzag
-infill_sparse_density = 20
-line_width = 0.4
-material_flow = 90
-material_print_temperature = 202
-material_print_temperature_layer_0 = 210
-meshfix_union_all = False
-retraction_amount = 1.3
-retraction_combing = all
-retraction_hop_enabled = 0.1
-retraction_min_travel = 1.2
-retraction_prime_speed = 30
-retraction_retract_speed = 70
-retraction_speed = 70
-skin_no_small_gaps_heuristic = False
-skirt_brim_minimal_length = 100
-skirt_brim_speed = 20
-skirt_line_count = 3
-speed_layer_0 = =math.ceil(speed_print * 20 / 45)
-speed_print = 45
-speed_slowdown_layers = 1
-speed_topbottom = =math.ceil(speed_print * 25 / 45)
-speed_travel = 120
-speed_travel_layer_0 = 60
-speed_wall = =math.ceil(speed_print * 25 / 45)
-speed_wall_x = =math.ceil(speed_print * 35 / 45)
-top_thickness = 0.8
-wall_thickness = 0.8
diff --git a/resources/quality/imade3d_jellybox/jbo_global_coarse.inst.cfg b/resources/quality/imade3d_jellybox/jbo_global_coarse.inst.cfg
new file mode 100644
index 0000000000..c6cd0d51ff
--- /dev/null
+++ b/resources/quality/imade3d_jellybox/jbo_global_coarse.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = Coarse
+definition = imade3d_jellybox
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = fast
+weight = -1
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.3
+layer_height_0 = 0.3
+retraction_hop = 0.2
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/jbo_global_fine.inst.cfg b/resources/quality/imade3d_jellybox/jbo_global_fine.inst.cfg
new file mode 100644
index 0000000000..27af4c23dc
--- /dev/null
+++ b/resources/quality/imade3d_jellybox/jbo_global_fine.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = Fine
+definition = imade3d_jellybox
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.1
+layer_height_0 = 0.3
+retraction_hop = 0.1
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/jbo_global_normal.inst.cfg b/resources/quality/imade3d_jellybox/jbo_global_normal.inst.cfg
new file mode 100644
index 0000000000..499dc6f3a2
--- /dev/null
+++ b/resources/quality/imade3d_jellybox/jbo_global_normal.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = Medium
+definition = imade3d_jellybox
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.2
+layer_height_0 = 0.3
+retraction_hop = 0.2
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox/jbo_global_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox/jbo_global_ultrafine.inst.cfg
new file mode 100644
index 0000000000..7e2aeee8c5
--- /dev/null
+++ b/resources/quality/imade3d_jellybox/jbo_global_ultrafine.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = UltraFine
+definition = imade3d_jellybox
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultrahigh
+weight = 2
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.05
+layer_height_0 = 0.3
+retraction_hop = 0.1
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_coarse.inst.cfg
new file mode 100644
index 0000000000..3a68f197a5
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_coarse.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Coarse
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = fast
+weight = -1
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+speed_print = 45
diff --git a/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_fine.inst.cfg b/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_fine.inst.cfg
new file mode 100644
index 0000000000..3756d20b0f
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_fine.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Fine
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+speed_print = 50  
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_medium.inst.cfg
new file mode 100644
index 0000000000..b3d706fd73
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/PETG/jb2_generic_petg_0.4_medium.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Medium
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg
+variant = 0.4 mm
+
+[values]
+speed_print = 45
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_coarse.inst.cfg
new file mode 100644
index 0000000000..3289c91f08
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_coarse.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Coarse
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+speed_print = 45
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_fine.inst.cfg b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_fine.inst.cfg
new file mode 100644
index 0000000000..72c3a8bff0
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_fine.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Fine
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+speed_print = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_medium.inst.cfg
new file mode 100644
index 0000000000..8c1c8a86e0
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_medium.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Medium
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+speed_print = 45
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_ultrafine.inst.cfg
new file mode 100644
index 0000000000..5b4430c983
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/PLA/jb2_generic_pla_0.4_ultrafine.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = UltraFine
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultrahigh
+weight = 2
+material = generic_pla
+variant = 0.4 mm
+
+[values]
+speed_print = 55
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/jb2_global_coarse.inst.cfg b/resources/quality/imade3d_jellybox_2/jb2_global_coarse.inst.cfg
new file mode 100644
index 0000000000..36694efec7
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/jb2_global_coarse.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = Coarse
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = fast
+weight = -1
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.3
+layer_height_0 = 0.3
+retraction_hop = 0.2
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/jb2_global_fine.inst.cfg b/resources/quality/imade3d_jellybox_2/jb2_global_fine.inst.cfg
new file mode 100644
index 0000000000..a7d4af2c66
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/jb2_global_fine.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = Fine
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.1
+layer_height_0 = 0.3
+retraction_hop = 0.1
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/jb2_global_normal.inst.cfg b/resources/quality/imade3d_jellybox_2/jb2_global_normal.inst.cfg
new file mode 100644
index 0000000000..46ac1f684b
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/jb2_global_normal.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = Medium
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.2
+layer_height_0 = 0.3
+retraction_hop = 0.2
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/imade3d_jellybox_2/jb2_global_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox_2/jb2_global_ultrafine.inst.cfg
new file mode 100644
index 0000000000..772556a7ad
--- /dev/null
+++ b/resources/quality/imade3d_jellybox_2/jb2_global_ultrafine.inst.cfg
@@ -0,0 +1,78 @@
+[general]
+version = 4
+name = UltraFine
+definition = imade3d_jellybox_2
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultrahigh
+weight = 2
+global_quality = True
+
+[values]
+adhesion_type = skirt
+layer_height = 0.05
+layer_height_0 = 0.3
+retraction_hop = 0.1
+bottom_thickness = =top_bottom_thickness
+coasting_enable = True
+coasting_min_volume = 2
+coasting_volume = 0.032
+cool_fan_speed_max = =cool_fan_speed
+infill_before_walls = False
+infill_line_width = =round(line_width * 1.5, 2)
+infill_pattern = zigzag
+infill_sparse_density = 25
+line_width = =machine_nozzle_size
+material_bed_temperature = =default_material_bed_temperature
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+print_sequence = all_at_once
+retract_at_layer_change = True
+retraction_combing = noskin
+retraction_hop_enabled = True
+retraction_min_travel = =machine_nozzle_size * 3
+retraction_retract_speed = =retraction_speed
+retraction_prime_speed = =retraction_speed - 30
+roofing_layer_count = 1
+skin_line_width = =line_width * 1.2
+skin_outline_count = 2
+skirt_brim_minimal_length = 100
+skirt_brim_speed = =speed_layer_0
+skirt_gap = 5
+skirt_line_count = 1
+speed_layer_0 = 20
+speed_roofing = 20
+speed_topbottom = 25
+speed_travel = =speed_print if magic_spiralize else 120
+speed_travel_layer_0 = 60
+support_angle = 60
+support_bottom_enable = False
+support_bottom_height = 0
+support_connect_zigzags = False
+support_enable = False
+support_infill_rate = 20
+support_interface_density = 70
+support_interface_enable = True
+support_interface_height = 2
+support_interface_pattern = concentric
+support_interface_skip_height = 0.1
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.8
+support_xy_distance_overhang = =machine_nozzle_size / 2
+support_z_distance = 0.2
+travel_compensate_overlapping_walls_0_enabled = =travel_compensate_overlapping_walls_enabled
+travel_compensate_overlapping_walls_x_enabled = =travel_compensate_overlapping_walls_enabled
+travel_retract_before_outer_wall = True
+wall_0_wipe_dist = =round(line_width * 1.2,1)
+bridge_settings_enabled = True
+bridge_enable_more_layers = False
+bridge_skin_material_flow = 85
+bridge_skin_speed = 20
+bridge_wall_material_flow = 85
+bridge_wall_speed = 20
+infill_enable_travel_optimization = True
+retraction_combing_max_distance = 50
\ No newline at end of file