mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-05-24 13:39:05 +08:00
Move scarf seam and acceleration/deceleration to experimental
CURA-12077
This commit is contained in:
Erwan MATHIEU
parent
deda5b2586
commit
1d28f7d778
@ -1436,111 +1436,6 @@
|
|||||||
"enabled": "z_seam_type == 'back'",
|
"enabled": "z_seam_type == 'back'",
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
"settable_per_mesh": true
|
"settable_per_mesh": true
|
||||||
},
|
|
||||||
"scarf_joint_seam_length":
|
|
||||||
{
|
|
||||||
"label": "Scarf Seam Length",
|
|
||||||
"description": "When greater than 0, a scarf joint will be created on the Z seam to make it less visible.",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 0,
|
|
||||||
"minimum_value": "0",
|
|
||||||
"unit": "mm",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
},
|
|
||||||
"scarf_joint_seam_start_height_ratio":
|
|
||||||
{
|
|
||||||
"label": "Scarf Seam Start Height",
|
|
||||||
"description": "This is the ratio over the total layer height where the scarf joint seam will start.",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 0,
|
|
||||||
"minimum_value": 0,
|
|
||||||
"maximum_value": 100.0,
|
|
||||||
"unit": "%",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
},
|
|
||||||
"scarf_split_distance":
|
|
||||||
{
|
|
||||||
"label": "Scarf Seam Split Distance",
|
|
||||||
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the scarf seam. A smaller distance will create a more precise but also more verbose G-Code.",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 1.0,
|
|
||||||
"minimum_value": 0.1,
|
|
||||||
"maximum_value": 100.0,
|
|
||||||
"unit": "mm",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
},
|
|
||||||
"wall_0_start_speed_ratio":
|
|
||||||
{
|
|
||||||
"label": "Outer Wall Start Speed Ratio",
|
|
||||||
"description": "This is the ratio of the top speed to start with when printing an outer wall.",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 100.0,
|
|
||||||
"minimum_value": 0.0,
|
|
||||||
"maximum_value": 100.0,
|
|
||||||
"unit": "%",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
},
|
|
||||||
"wall_0_acceleration":
|
|
||||||
{
|
|
||||||
"label": "Outer Wall Acceleration",
|
|
||||||
"description": "This is the acceleration with which to reach the top speed when printing an outer wall.",
|
|
||||||
"enabled": "wall_0_start_speed_ratio < 100.0",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 20.0,
|
|
||||||
"minimum_value": 1.0,
|
|
||||||
"maximum_value": 1000.0,
|
|
||||||
"unit": "mm/s\u00b2",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
},
|
|
||||||
"wall_0_end_speed_ratio":
|
|
||||||
{
|
|
||||||
"label": "Outer Wall End Speed Ratio",
|
|
||||||
"description": "This is the ratio of the top speed to end with when printing an outer wall.",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 100.0,
|
|
||||||
"minimum_value": 0.0,
|
|
||||||
"maximum_value": 100.0,
|
|
||||||
"unit": "%",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
},
|
|
||||||
"wall_0_deceleration":
|
|
||||||
{
|
|
||||||
"label": "Outer Wall Deceleration",
|
|
||||||
"description": "This is the deceleration with which to end printing an outer wall.",
|
|
||||||
"enabled": "wall_0_end_speed_ratio < 100.0",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 20.0,
|
|
||||||
"minimum_value": 1.0,
|
|
||||||
"maximum_value": 1000.0,
|
|
||||||
"unit": "mm/s\u00b2",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
},
|
|
||||||
"wall_0_speed_split_distance":
|
|
||||||
{
|
|
||||||
"label": "Outer Wall Speed Split Distance",
|
|
||||||
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code.",
|
|
||||||
"type": "float",
|
|
||||||
"default_value": 1.0,
|
|
||||||
"minimum_value": 0.1,
|
|
||||||
"maximum_value": 100.0,
|
|
||||||
"unit": "mm",
|
|
||||||
"limit_to_extruder": "wall_0_extruder_nr",
|
|
||||||
"settable_per_extruder": true,
|
|
||||||
"settable_per_mesh": true
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
@ -9028,6 +8923,111 @@
|
|||||||
"type": "bool",
|
"type": "bool",
|
||||||
"default_value": true,
|
"default_value": true,
|
||||||
"settable_per_mesh": true
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"scarf_joint_seam_length":
|
||||||
|
{
|
||||||
|
"label": "Scarf Seam Length",
|
||||||
|
"description": "When greater than 0, a scarf joint will be created on the Z seam to make it less visible.",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 0,
|
||||||
|
"minimum_value": "0",
|
||||||
|
"unit": "mm",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"scarf_joint_seam_start_height_ratio":
|
||||||
|
{
|
||||||
|
"label": "Scarf Seam Start Height",
|
||||||
|
"description": "This is the ratio over the total layer height where the scarf joint seam will start.",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 0,
|
||||||
|
"minimum_value": 0,
|
||||||
|
"maximum_value": 100.0,
|
||||||
|
"unit": "%",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"scarf_split_distance":
|
||||||
|
{
|
||||||
|
"label": "Scarf Seam Split Distance",
|
||||||
|
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the scarf seam. A smaller distance will create a more precise but also more verbose G-Code.",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 1.0,
|
||||||
|
"minimum_value": 0.1,
|
||||||
|
"maximum_value": 100.0,
|
||||||
|
"unit": "mm",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"wall_0_start_speed_ratio":
|
||||||
|
{
|
||||||
|
"label": "Outer Wall Start Speed Ratio",
|
||||||
|
"description": "This is the ratio of the top speed to start with when printing an outer wall.",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 100.0,
|
||||||
|
"minimum_value": 0.0,
|
||||||
|
"maximum_value": 100.0,
|
||||||
|
"unit": "%",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"wall_0_acceleration":
|
||||||
|
{
|
||||||
|
"label": "Outer Wall Acceleration",
|
||||||
|
"description": "This is the acceleration with which to reach the top speed when printing an outer wall.",
|
||||||
|
"enabled": "wall_0_start_speed_ratio < 100.0",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 20.0,
|
||||||
|
"minimum_value": 1.0,
|
||||||
|
"maximum_value": 1000.0,
|
||||||
|
"unit": "mm/s\u00b2",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"wall_0_end_speed_ratio":
|
||||||
|
{
|
||||||
|
"label": "Outer Wall End Speed Ratio",
|
||||||
|
"description": "This is the ratio of the top speed to end with when printing an outer wall.",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 100.0,
|
||||||
|
"minimum_value": 0.0,
|
||||||
|
"maximum_value": 100.0,
|
||||||
|
"unit": "%",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"wall_0_deceleration":
|
||||||
|
{
|
||||||
|
"label": "Outer Wall Deceleration",
|
||||||
|
"description": "This is the deceleration with which to end printing an outer wall.",
|
||||||
|
"enabled": "wall_0_end_speed_ratio < 100.0",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 20.0,
|
||||||
|
"minimum_value": 1.0,
|
||||||
|
"maximum_value": 1000.0,
|
||||||
|
"unit": "mm/s\u00b2",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
|
},
|
||||||
|
"wall_0_speed_split_distance":
|
||||||
|
{
|
||||||
|
"label": "Outer Wall Speed Split Distance",
|
||||||
|
"description": "This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code.",
|
||||||
|
"type": "float",
|
||||||
|
"default_value": 1.0,
|
||||||
|
"minimum_value": 0.1,
|
||||||
|
"maximum_value": 100.0,
|
||||||
|
"unit": "mm",
|
||||||
|
"limit_to_extruder": "wall_0_extruder_nr",
|
||||||
|
"settable_per_extruder": true,
|
||||||
|
"settable_per_mesh": true
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user