diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_C.inst.cfg
index bf543d092c..938fe0ad32 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_C.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_C.inst.cfg
@@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 cool_min_speed = 10
-support_angle = 55
+support_angle = 50
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_D.inst.cfg
index 83832533a7..4fd317e6db 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_D.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_D.inst.cfg
@@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 cool_min_speed = 10
-support_angle = 55
+support_angle = 50
 material_print_temperature = =default_material_print_temperature + 3
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_E.inst.cfg
index 3d83e02085..a3be4ef0b3 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_E.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_HIPS_E.inst.cfg
@@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 cool_min_speed = 10
-support_angle = 55
+support_angle = 50
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_C.inst.cfg
index 3f51624239..2f1e5a72e9 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_C.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_C.inst.cfg
@@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
+support_angle = 50
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_D.inst.cfg
index 5da500a88b..3b81e41671 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_D.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_D.inst.cfg
@@ -30,8 +30,8 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
-material_print_temperature = =default_material_print_temperature + 3
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.3
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_E.inst.cfg
index d8082aad7d..ef67be17d2 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_E.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-M_E.inst.cfg
@@ -30,8 +30,8 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
-material_print_temperature = =default_material_print_temperature + 5
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.3
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg
index 0736de0994..dc308bcc5c 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg
@@ -30,21 +30,21 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
+support_angle = 50
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.3
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
-skin_overlap = 5
+skin_overlap = 10
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
 support_xy_distance = =line_width * 0.5
 support_xy_distance_overhang = =line_width*0
-support_offset = 2
+support_offset = 3
 support_pattern = grid
 support_interface_density = 100
 prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg
index 971fe5f76c..fc60c3670f 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg
@@ -30,21 +30,21 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
-material_print_temperature = =default_material_print_temperature + 3
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.3
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
-skin_overlap = 5
+skin_overlap = 10
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
 support_xy_distance = =line_width * 0.5
 support_xy_distance_overhang = =line_width*0
-support_offset = 2
+support_offset = 3
 support_pattern = grid
 support_interface_density = 100
 prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg
index 6994af0705..45d89c6948 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg
@@ -30,21 +30,21 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
-material_print_temperature = =default_material_print_temperature + 5
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.3
 retraction_min_travel = =3*line_width
 retraction_hop_only_when_collides = True
-skin_overlap = 5
+skin_overlap = 10
 support_bottom_stair_step_height = 0
 support_bottom_stair_step_width = 0
 support_z_distance = =layer_height-layer_height
 support_bottom_distance = =support_z_distance
 support_xy_distance = =line_width * 0.5
 support_xy_distance_overhang = =line_width*0
-support_offset = 2
+support_offset = 3
 support_pattern = grid
 support_interface_density = 100
 prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_C.inst.cfg
index 739b4ad94b..517a3ecb37 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_C.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_C.inst.cfg
@@ -30,7 +30,7 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
+support_angle = 50
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_D.inst.cfg
index 92e0f55aaf..78956eb485 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_D.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_D.inst.cfg
@@ -30,8 +30,8 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
-material_print_temperature = =default_material_print_temperature + 3
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.3
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_E.inst.cfg
index 4e42dcb139..d4a0c49945 100644
--- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_E.inst.cfg
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-S_E.inst.cfg
@@ -30,8 +30,8 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
 cool_min_speed = 10
-support_angle = 55
-material_print_temperature = =default_material_print_temperature + 5
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
 material_flow = 97
 retraction_extra_prime_amount = 0.3