diff --git a/resources/definitions/eryone_thinker.def.json b/resources/definitions/eryone_thinker.def.json
index 02d8abc8bf..9651ecdda3 100644
--- a/resources/definitions/eryone_thinker.def.json
+++ b/resources/definitions/eryone_thinker.def.json
@@ -27,21 +27,33 @@
         "machine_name": { 
             "default_value": "Eryone Thinker Series" 
         },
-        "machine_heated_bed": { 
-            "default_value": true 
+        "machine_start_gcode": { 
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z10.0 F600 ;move the platform down 10mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y-3 F1200 ;move to prime\nG1 X10 F1200 ;\nG1 Z0.1 F600 ;get ready to prime\nG1 X120 E15 F1200 ;prime nozzle \nG1 X120 F3600 ;quick wipe\nG92 E0 ;zero the extruded length\nM413 S1 ;enable resume from power failure\nM117 Printing..." 
+        },
+        "machine_end_gcode": { 
+            "default_value": "M104 S0 ;turn off extruder\nM140 S0 ;turn off bed\nM107 ;turn off all fans\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y250 F4800 ; position for easy part removal\nM84 ;steppers off" 
+        },
+        "material_diameter": {
+            "default_value": 1.75 
         },
         "machine_width": {
             "default_value": 300 
         },
+        "machine_depth": { 
+            "default_value": 300 
+        },
         "machine_height": { 
             "default_value": 400 
         },
-        "machine_depth": { 
-            "default_value": 300 
+        "machine_heated_bed": { 
+            "default_value": true 
         },
         "machine_center_is_zero": { 
             "default_value": false 
         },
+        "machine_gcode_flavor": { 
+            "default_value": "RepRap (Marlin/Sprinter)" 
+        },
         "machine_head_with_fans_polygon": { 
             "default_value": [
                 [-20, 30],
@@ -51,16 +63,16 @@
             ]
         },
         "gantry_height": { 
-            "value": 30 
+            "value": 30
         },
-        "machine_gcode_flavor": { 
-            "default_value": "RepRap (Marlin/Sprinter)" 
+        "machine_max_feedrate_x": {
+            "value": 300
         },
-        "machine_start_gcode": { 
-            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z10.0 F600 ;move the platform down 10mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y-3 F1200 ;move to prime\nG1 X10 F1200 ;\nG1 Z0.1 F600 ;get ready to prime\nG1 X120 E15 F1200 ;prime nozzle \nG1 X120 F3600 ;quick wipe\nG92 E0 ;zero the extruded length\nM413 S1 ;enable resume from power failure\nM117 Printing..." 
+        "machine_max_feedrate_y": {
+            "value": 300
         },
-        "machine_end_gcode": { 
-            "default_value": "M104 S0 ;turn off extruder\nM140 S0 ;turn off bed\nM107 ;turn off all fans\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y250 F4800 ; position for easy part removal\nM84 ;steppers off" 
+        "machine_max_feedrate_z": {
+            "value": 35
         },
         "layer_height": {
             "value": 0.2
diff --git a/resources/definitions/eryone_thinker_direct.def.json b/resources/definitions/eryone_thinker_direct.def.json
new file mode 100644
index 0000000000..c27645235b
--- /dev/null
+++ b/resources/definitions/eryone_thinker_direct.def.json
@@ -0,0 +1,18 @@
+{
+    "name": "Eryone Thinker DirectDrive",
+    "version": 2,
+    "inherits": "eryone_thinker",
+    "overrides": {
+        "machine_name": { "default_value": "Eryone Thinker DirectDrive" }
+    },
+    "metadata": {
+        "quality_definition": "eryone_thinker",
+        "speed_print": {
+            "maximum_value_warning": 130
+        },
+        "retraction_speed": {
+            "default_value": 35,
+            "maximum_value_warning": 40
+        }
+    }
+}
\ No newline at end of file