raft middle layer thickness has new default

The raft middle layer thickness is the average between the top and the base of the raft. This reduces flow jumps significantly. PP-243
2025-08-12 20:19:13 +08:00 · 2022-09-13 10:20:40 +02:00 · 2022-09-13 10:20:40 +02:00 · 257d37eb73
commit 257d37eb73
parent 5646a4db6e
59 changed files with 3 additions and 58 deletions
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@ -239,6 +239,9 @@
        "gradual_support_infill_step_height": {
            "value": "4*layer_height"
        },
+        "raft_interface_thickness": {
+            "value": "(raft_base_thickness + raft_surface_thickness) / 2"
+        },
        "support_interface_height": {
            "value": "2*layer_height"
        },
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@ -115,7 +115,6 @@
        "raft_base_thickness": { "value": "0.3" },
        "raft_interface_line_spacing": { "value": "0.5" },
        "raft_interface_line_width": { "value": "0.5" },
-        "raft_interface_thickness": { "value": "0.2" },
        "retraction_amount": { "value": "6.5" },
        "retraction_hop": { "value": "2" },
        "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@ -106,7 +106,6 @@
        "raft_interface_line_spacing": { "value": "0.5" },
        "raft_interface_line_width": { "value": "0.5" },
        "raft_interface_speed": { "value": "20" },
-        "raft_interface_thickness": { "value": "0.2" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
        "retraction_hop": { "value": "2" },
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@ -107,7 +107,6 @@
        "raft_interface_line_spacing": { "value": "0.5" },
        "raft_interface_line_width": { "value": "0.5" },
        "raft_interface_speed": { "value": "20" },
-        "raft_interface_thickness": { "value": "0.2" },
        "raft_speed": { "value": "25" },
        "retraction_amount": { "value": "6.5" },
        "retraction_combing": { "value": "'no_outer_surfaces'"},
--- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg
@ -19,7 +19,6 @@ machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
 retraction_min_travel = 5
 skin_overlap = 50
 speed_print = 70
--- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
@ -27,7 +27,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
@ -21,7 +21,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
@ -21,7 +21,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 switch_extruder_prime_speed = 30
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@ -35,7 +35,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@ -33,7 +33,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@ -35,7 +35,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@ -32,7 +32,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
@ -21,7 +21,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@ -22,7 +22,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@ -22,7 +22,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
@ -19,7 +19,6 @@ machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
 retraction_min_travel = 5
 skin_overlap = 50
 speed_print = 70
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@ -26,7 +26,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@ -19,7 +19,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@ -19,7 +19,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@ -32,7 +32,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@ -31,7 +31,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@ -33,7 +33,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@ -31,7 +31,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
@ -23,7 +23,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@ -23,7 +23,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@ -23,7 +23,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
@ -20,7 +20,6 @@ machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
 retraction_min_travel = 5
 skin_overlap = 50
 speed_print = 70
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@ -26,7 +26,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@ -19,7 +19,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@ -19,7 +19,6 @@ material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@ -32,7 +32,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@ -31,7 +31,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@ -32,7 +32,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@ -30,7 +30,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
-raft_interface_thickness = =max(layer_height * 1.5, 0.225)
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
@ -21,7 +21,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
@ -21,7 +21,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
@ -23,7 +23,6 @@ ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
-raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@ -38,7 +38,6 @@ raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
 raft_interface_line_width = 0.5
 raft_interface_speed = 20
-raft_interface_thickness = 0.2
 raft_speed = 25
 raft_surface_layers = 1
 retraction_hop = 2
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@ -38,7 +38,6 @@ raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
 raft_interface_line_width = 0.5
 raft_interface_speed = 20
-raft_interface_thickness = 0.2
 raft_speed = 25
 raft_surface_layers = 1
 retraction_hop = 2
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@ -37,7 +37,6 @@ raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
 raft_interface_line_width = 0.5
 raft_interface_speed = 20
-raft_interface_thickness = 0.2
 raft_speed = 25
 raft_surface_layers = 1
 retraction_hop = 2
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@ -22,7 +22,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@ -37,7 +37,6 @@ raft_base_thickness = 0.3
 raft_interface_line_spacing = 0.5
 raft_interface_line_width = 0.5
 raft_interface_speed = 20
-raft_interface_thickness = 0.2
 raft_speed = 25
 raft_surface_layers = 1
 retraction_hop = 2
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@ -18,7 +18,6 @@ raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
-raft_interface_thickness = =layer_height * 1.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print