diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
index 2e5120b0d7..92f5ffd308 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
@@ -11,23 +11,17 @@ quality_type = fast
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
@@ -38,44 +32,34 @@ infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
 layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
-retraction_extra_prime_amount = 0
 retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
 skin_overlap = 10
-speed_infill = =speed_print
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -85,9 +69,7 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.8
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
-wall_thickness = 0.76
+wall_thickness = 0.76
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
index f311c28fc8..f7bd19e3e2 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
@@ -11,23 +11,17 @@ quality_type = normal
 
 [values]
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
@@ -38,44 +32,33 @@ infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.1
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
-retraction_extra_prime_amount = 0
 retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
 skin_overlap = 10
-speed_infill = =speed_print
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -85,9 +68,7 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
-top_bottom_thickness = 0.8
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2)
-wall_thickness = 0.76
+wall_thickness = 0.76
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
index 341a35926a..314ed8ace8 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
@@ -10,54 +10,40 @@ weight = 0
 quality_type = draft
 
 [values]
-layer_height = 0.2
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.6
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+layer_height = 0.2
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
-speed_infill = =speed_print
+skin_overlap = 10
+skirt_brim_line_width = 0.6
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
-wall_thickness = 1.14
+wall_thickness = 1.14
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
index d1790dde47..89e21dadce 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
@@ -10,54 +10,40 @@ weight = -1
 quality_type = fast
 
 [values]
-layer_height = 0.15
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.6
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.6 / 0.57, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+layer_height = 0.15
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
-speed_infill = =speed_print
+skin_overlap = 10
+skirt_brim_line_width = 0.6
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2)
-wall_thickness = 1.14
+wall_thickness = 1.14
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
index 2a6397d2e8..926f75066d 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
@@ -10,54 +10,40 @@ weight = 0
 quality_type = draft
 
 [values]
-layer_height = 0.3
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.8
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 2
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+layer_height = 0.3
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
-speed_infill = =speed_print
+skin_overlap = 10
+skirt_brim_line_width = 0.8
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg
index 185597ef74..1891f57644 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg
@@ -10,54 +10,40 @@ weight = 0
 quality_type = fast
 
 [values]
-layer_height = 0.2
-gradual_infill_steps = 3
-retraction_extra_prime_amount = 0
-skirt_brim_line_width = 0.8
-infill_overlap_mm = 0
-skin_overlap = 10
 acceleration_enabled = True
-acceleration_infill = =acceleration_print
 acceleration_layer_0 = =acceleration_topbottom
 acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
 acceleration_print = 4000
 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
 acceleration_support_interface = =acceleration_topbottom
 acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
 acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 20
 cool_fan_speed_max = 100
-cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 20
 gradual_infill_step_height = =layer_height * 3
+gradual_infill_steps = 3
 infill_line_width = =round(line_width * 0.8 / 0.76, 2)
 infill_overlap = 0
+infill_overlap_mm = 0
 infill_pattern = cubic
 infill_sparse_density = 96
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_infill = =jerk_print
 jerk_layer_0 = =jerk_topbottom
 jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
 jerk_support_interface = =jerk_topbottom
 jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
+layer_height = 0.2
 line_width = =machine_nozzle_size * 0.95
 multiple_mesh_overlap = 0
-retraction_amount = 8
 retraction_count_max = 12
 retraction_extrusion_window = 1
 retraction_hop = 0.15
@@ -65,19 +51,17 @@ retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
 retraction_prime_speed = 15
-retraction_speed = 35
-speed_infill = =speed_print
+skin_overlap = 10
+skirt_brim_line_width = 0.8
 speed_layer_0 = 25
 speed_prime_tower = =speed_topbottom
 speed_print = 25
-speed_support = =speed_wall_0
 speed_support_interface = =speed_topbottom
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_travel = 250
 speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
-speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
@@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2)
 wall_thickness = 1.52
\ No newline at end of file