From 25d2c10548391eeab016379f2a998dd9df77063d Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Fri, 23 Jun 2017 14:15:27 +0200 Subject: [PATCH] Optimise Ultimaker 2+ polypropylene profiles These are optimised to the level of the materials: Anything that is common between quality profiles with the same material and nozzle gets bubbled to the profile for that material (per nozzle). It doesn't bubble any further (to the variant) because that could have an impact on the other profiles. This basically only removes settings because where these settings then bubble to is the material profile in the fdm_materials repository. And a lot of settings are just removed because they are equal to the default. Contributes to issue CURA-3960. --- .../ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg | 20 +------------ .../um2p_pp_0.4_normal.inst.cfg | 21 +------------- .../um2p_pp_0.6_draft.inst.cfg | 29 ++++--------------- .../ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg | 29 ++++--------------- .../um2p_pp_0.8_draft.inst.cfg | 27 ++++------------- .../ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg | 27 ++++------------- 6 files changed, 24 insertions(+), 129 deletions(-) diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 2e5120b0d7..92f5ffd308 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -11,23 +11,17 @@ quality_type = fast [values] acceleration_enabled = True -acceleration_infill = =acceleration_print acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support acceleration_support_interface = =acceleration_topbottom acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 -cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 gradual_infill_step_height = =layer_height * 2 @@ -38,44 +32,34 @@ infill_pattern = cubic infill_sparse_density = 96 infill_wipe_dist = 0 jerk_enabled = True -jerk_infill = =jerk_print jerk_layer_0 = =jerk_topbottom jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall layer_height = 0.15 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 -retraction_amount = 8 retraction_count_max = 12 -retraction_extra_prime_amount = 0 retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 -retraction_speed = 35 skin_overlap = 10 -speed_infill = =speed_print speed_layer_0 = 25 speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance @@ -85,9 +69,7 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 -top_bottom_thickness = 0.8 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) -wall_thickness = 0.76 +wall_thickness = 0.76 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index f311c28fc8..f7bd19e3e2 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -11,23 +11,17 @@ quality_type = normal [values] acceleration_enabled = True -acceleration_infill = =acceleration_print acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support acceleration_support_interface = =acceleration_topbottom acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 -cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 gradual_infill_step_height = =layer_height * 2 @@ -38,44 +32,33 @@ infill_pattern = cubic infill_sparse_density = 96 infill_wipe_dist = 0 jerk_enabled = True -jerk_infill = =jerk_print jerk_layer_0 = =jerk_topbottom jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 -retraction_amount = 8 retraction_count_max = 12 -retraction_extra_prime_amount = 0 retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 -retraction_speed = 35 skin_overlap = 10 -speed_infill = =speed_print speed_layer_0 = 25 speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance @@ -85,9 +68,7 @@ support_z_distance = =layer_height * 2 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 -top_bottom_thickness = 0.8 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) -wall_thickness = 0.76 +wall_thickness = 0.76 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index 341a35926a..314ed8ace8 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -10,54 +10,40 @@ weight = 0 quality_type = draft [values] -layer_height = 0.2 -gradual_infill_steps = 3 -retraction_extra_prime_amount = 0 -skirt_brim_line_width = 0.6 -infill_overlap_mm = 0 -skin_overlap = 10 acceleration_enabled = True -acceleration_infill = =acceleration_print acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support acceleration_support_interface = =acceleration_topbottom acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 -cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 gradual_infill_step_height = =layer_height * 2 +gradual_infill_steps = 3 infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 +infill_overlap_mm = 0 infill_pattern = cubic infill_sparse_density = 96 infill_wipe_dist = 0 jerk_enabled = True -jerk_infill = =jerk_print jerk_layer_0 = =jerk_topbottom jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) +layer_height = 0.2 line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 -retraction_amount = 8 retraction_count_max = 12 retraction_extrusion_window = 1 retraction_hop = 0.15 @@ -65,19 +51,17 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 -retraction_speed = 35 -speed_infill = =speed_print +skin_overlap = 10 +skirt_brim_line_width = 0.6 speed_layer_0 = 25 speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance @@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) -wall_thickness = 1.14 +wall_thickness = 1.14 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index d1790dde47..89e21dadce 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -10,54 +10,40 @@ weight = -1 quality_type = fast [values] -layer_height = 0.15 -gradual_infill_steps = 3 -retraction_extra_prime_amount = 0 -skirt_brim_line_width = 0.6 -infill_overlap_mm = 0 -skin_overlap = 10 acceleration_enabled = True -acceleration_infill = =acceleration_print acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support acceleration_support_interface = =acceleration_topbottom acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 -cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 gradual_infill_step_height = =layer_height * 2 +gradual_infill_steps = 3 infill_line_width = =round(line_width * 0.6 / 0.57, 2) infill_overlap = 0 +infill_overlap_mm = 0 infill_pattern = cubic infill_sparse_density = 96 infill_wipe_dist = 0 jerk_enabled = True -jerk_infill = =jerk_print jerk_layer_0 = =jerk_topbottom jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) +layer_height = 0.15 line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 -retraction_amount = 8 retraction_count_max = 12 retraction_extrusion_window = 1 retraction_hop = 0.15 @@ -65,19 +51,17 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 -retraction_speed = 35 -speed_infill = =speed_print +skin_overlap = 10 +skirt_brim_line_width = 0.6 speed_layer_0 = 25 speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance @@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) -wall_thickness = 1.14 +wall_thickness = 1.14 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index 2a6397d2e8..926f75066d 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -10,54 +10,40 @@ weight = 0 quality_type = draft [values] -layer_height = 0.3 -gradual_infill_steps = 3 -retraction_extra_prime_amount = 0 -skirt_brim_line_width = 0.8 -infill_overlap_mm = 0 -skin_overlap = 10 acceleration_enabled = True -acceleration_infill = =acceleration_print acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support acceleration_support_interface = =acceleration_topbottom acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 -cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 gradual_infill_step_height = =layer_height * 2 +gradual_infill_steps = 3 infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 +infill_overlap_mm = 0 infill_pattern = cubic infill_sparse_density = 96 infill_wipe_dist = 0 jerk_enabled = True -jerk_infill = =jerk_print jerk_layer_0 = =jerk_topbottom jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) +layer_height = 0.3 line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 -retraction_amount = 8 retraction_count_max = 12 retraction_extrusion_window = 1 retraction_hop = 0.15 @@ -65,19 +51,17 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 -retraction_speed = 35 -speed_infill = =speed_print +skin_overlap = 10 +skirt_brim_line_width = 0.8 speed_layer_0 = 25 speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance @@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.5 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg index 185597ef74..1891f57644 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_fast.inst.cfg @@ -10,54 +10,40 @@ weight = 0 quality_type = fast [values] -layer_height = 0.2 -gradual_infill_steps = 3 -retraction_extra_prime_amount = 0 -skirt_brim_line_width = 0.8 -infill_overlap_mm = 0 -skin_overlap = 10 acceleration_enabled = True -acceleration_infill = =acceleration_print acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support acceleration_support_interface = =acceleration_topbottom acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 20 cool_fan_speed_max = 100 -cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 gradual_infill_step_height = =layer_height * 3 +gradual_infill_steps = 3 infill_line_width = =round(line_width * 0.8 / 0.76, 2) infill_overlap = 0 +infill_overlap_mm = 0 infill_pattern = cubic infill_sparse_density = 96 infill_wipe_dist = 0 jerk_enabled = True -jerk_infill = =jerk_print jerk_layer_0 = =jerk_topbottom jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 5 / 25) jerk_wall = =math.ceil(jerk_print * 10 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) +layer_height = 0.2 line_width = =machine_nozzle_size * 0.95 multiple_mesh_overlap = 0 -retraction_amount = 8 retraction_count_max = 12 retraction_extrusion_window = 1 retraction_hop = 0.15 @@ -65,19 +51,17 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 -retraction_speed = 35 -speed_infill = =speed_print +skin_overlap = 10 +skirt_brim_line_width = 0.8 speed_layer_0 = 25 speed_prime_tower = =speed_topbottom speed_print = 25 -speed_support = =speed_wall_0 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance @@ -89,7 +73,6 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.5 travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 \ No newline at end of file