Improve PVA printing reliability. Increase linewidth at first layer, enable prime tower, increase print speed PVA.

PP-429
2025-06-04 11:14:21 +08:00 · 2024-06-17 15:19:52 +02:00 · 2024-06-17 15:19:52 +02:00 · 262b6f1458
commit 262b6f1458
parent 332cf85264
73 changed files with 96 additions and 59 deletions
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@ -89,6 +89,9 @@
        },
        "meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" },
        "meshfix_maximum_resolution": { "value": "max(speed_wall_0 / 75, 0.5)" },
+        "prime_tower_base_curve_magnitude": { "value": 2 },
+        "prime_tower_base_height": { "value": 6 },
+        "prime_tower_base_size": { "value": 10 },
        "raft_base_speed": { "value": "raft_speed" },
        "raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" },
        "raft_interface_fan_speed": { "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" },
@ -126,6 +129,7 @@
        "support_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
        "support_tower_maximum_supported_diameter": { "value": "support_tower_diameter" },
        "support_tower_roof_angle": { "value": "0 if support_interface_enable else 65" },
+        "support_use_towers": { "value": false },
        "support_wall_count": { "value": "1 if support_structure == 'tree' else 0" },
        "support_xy_distance_overhang": { "value": "0.2" },
        "support_z_distance": { "value": "0" },
--- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg
@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 prime_tower_min_volume = 15
 skin_material_flow = =material_flow * 0.93
 speed_print = 50
--- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg
@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 prime_tower_min_volume = 15
 skin_material_flow = =material_flow * 0.93
 speed_print = 50
--- a/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg
@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 prime_tower_min_volume = 15
 skin_material_flow = =material_flow * 0.93
 speed_print = 40
--- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg
@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 prime_tower_min_volume = 15
 skin_material_flow = =material_flow * 0.93
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
--- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg
@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 prime_tower_min_volume = 15
 skin_material_flow = =material_flow * 0.93
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
--- a/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg
@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 prime_tower_min_volume = 15
 skin_material_flow = =material_flow * 0.93
 support_infill_sparse_thickness = =min(layer_height * 2, machine_nozzle_size * 3 / 4) if layer_height <= 0.15 / 0.4 * machine_nozzle_size else layer_height
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg
@ -41,7 +41,6 @@ machine_nozzle_cool_down_speed = 1.3
 machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg
@ -15,7 +15,6 @@ weight = 1
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg
@ -14,7 +14,6 @@ weight = -1
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 70
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg
@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 support_bottom_distance = =support_z_distance
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg
@ -42,7 +42,6 @@ machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg
@ -43,7 +43,6 @@ material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg
@ -42,7 +42,6 @@ machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg
@ -45,7 +45,6 @@ material_max_flowrate = 12
 material_print_temperature = =default_material_print_temperature + 5
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg
@ -44,7 +44,6 @@ material_max_flowrate = 12
 material_print_temperature = =default_material_print_temperature + 10
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg
@ -47,7 +47,6 @@ material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 10
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg
@ -44,7 +44,6 @@ material_flow = 93
 material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 10
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg
@ -44,7 +44,6 @@ material_flow = 93
 material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg
@ -12,12 +12,16 @@ variant = BB 0.4
 weight = 1

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =3 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg
@ -12,11 +12,15 @@ variant = BB 0.4
 weight = -1

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-prime_tower_enable = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg
@ -12,12 +12,16 @@ variant = BB 0.4
 weight = 0

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg
@ -12,11 +12,15 @@ variant = BB 0.4
 weight = -2

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg
@ -13,11 +13,16 @@ variant = BB 0.4
 weight = -3

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg
@ -12,9 +12,14 @@ variant = BB 0.8
 weight = -2

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg
@ -12,11 +12,16 @@ variant = BB 0.8
 weight = -3

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg
@ -12,10 +12,15 @@ variant = BB 0.8
 weight = -4

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_um-pla_0.1mm.inst.cfg
@ -41,7 +41,6 @@ machine_nozzle_cool_down_speed = 1.3
 machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg
@ -15,7 +15,6 @@ weight = 1
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg
@ -14,7 +14,6 @@ weight = -1
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 70
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg
@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 support_bottom_distance = =support_z_distance
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 50
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg
@ -42,7 +42,6 @@ machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg
@ -43,7 +43,6 @@ material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg
@ -42,7 +42,6 @@ machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg
@ -45,7 +45,6 @@ material_max_flowrate = 12
 material_print_temperature = =default_material_print_temperature + 5
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg
@ -44,7 +44,6 @@ material_max_flowrate = 12
 material_print_temperature = =default_material_print_temperature + 10
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg
@ -47,7 +47,6 @@ material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 10
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg
@ -44,7 +44,6 @@ material_flow = 93
 material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 10
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg
@ -44,7 +44,6 @@ material_flow = 93
 material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg
@ -12,12 +12,16 @@ variant = BB 0.4
 weight = 1

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =3 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg
@ -12,11 +12,15 @@ variant = BB 0.4
 weight = -1

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-prime_tower_enable = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg
@ -12,12 +12,16 @@ variant = BB 0.4
 weight = 0

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg
@ -12,11 +12,15 @@ variant = BB 0.4
 weight = -2

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg
@ -13,12 +13,16 @@ variant = BB 0.4
 weight = -3

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg
@ -12,9 +12,14 @@ variant = BB 0.8
 weight = -2

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg
@ -12,11 +12,16 @@ variant = BB 0.8
 weight = -3

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg
@ -12,10 +12,15 @@ variant = BB 0.8
 weight = -4

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)