From 27aef006a88c58a9a7414b5965362c9ccaa41791 Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Mon, 25 Apr 2016 16:21:27 +0200 Subject: [PATCH] Remove retraction settings from ulti-profile Paul agreed, this should not be dependent on the quality. It was meant to allow a bit slower prints due to the time it takes to do a retraction, but that is not the bottleneck here. Material hardness is the bottleneck. Grinding is. Contributes to issue CURA-346. --- resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile | 2 -- 1 file changed, 2 deletions(-) diff --git a/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile b/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile index 5cb807de01..db091d8e8d 100644 --- a/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile +++ b/resources/profiles/ultimaker2+/pla_0.4_ulti.curaprofile @@ -13,8 +13,6 @@ layer_height_0 = 0.26 wall_thickness = 1.4 top_bottom_thickness = 1.12 infill_sparse_density = 25 -retraction_amount = 5.5 -retraction_extrusion_window = 6 speed_print = 30 speed_infill = 50 speed_wall_x = 40