From 27d56d378e6e6a8e18c20ed3973a47842c7530dd Mon Sep 17 00:00:00 2001 From: Rijk van Manen Date: Thu, 6 Oct 2022 16:11:04 +0200 Subject: [PATCH] improve initial layer settings ultimaker.def.json is also cleaned and put in alphabetic order. Ultimaker 2 and original are kept mostly as they were, since they are not tested. PP-42 --- resources/definitions/ultimaker.def.json | 373 +++++------------- resources/definitions/ultimaker2.def.json | 9 + .../ultimaker2_plus_connect.def.json | 1 - resources/definitions/ultimaker3.def.json | 6 - .../definitions/ultimaker_original.def.json | 9 + resources/definitions/ultimaker_s3.def.json | 6 - resources/definitions/ultimaker_s5.def.json | 5 - ...um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg | 1 - ..._s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg | 1 - ...aa0.4_ABS_Normal_Quality_Accurate.inst.cfg | 1 - ...s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg | 1 - ...a0.4_CPEP_Normal_Quality_Accurate.inst.cfg | 1 - ..._s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg | 1 - ...aa0.4_CPE_Normal_Quality_Accurate.inst.cfg | 1 - ...3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg | 1 - ...0.4_Nylon_Normal_Quality_Accurate.inst.cfg | 1 - ...m_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg | 1 - ..._aa0.4_PC_Normal_Quality_Accurate.inst.cfg | 1 - ...s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg | 1 - ...a0.4_PETG_Normal_Quality_Accurate.inst.cfg | 1 - ...um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg | 1 - ..._s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg | 1 - ...aa0.4_PLA_Normal_Quality_Accurate.inst.cfg | 1 - ...3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg | 1 - ...m_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg | 1 - ...s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg | 1 - ...a0.4_TPLA_Normal_Quality_Accurate.inst.cfg | 1 - ..._aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg | 1 - ...um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg | 1 - ..._s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg | 1 - ...aa0.4_ABS_Normal_Quality_Accurate.inst.cfg | 1 - ...s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg | 1 - ...a0.4_CPEP_Normal_Quality_Accurate.inst.cfg | 1 - ..._s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg | 1 - ...aa0.4_CPE_Normal_Quality_Accurate.inst.cfg | 1 - ...5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg | 1 - ...0.4_Nylon_Normal_Quality_Accurate.inst.cfg | 1 - ...m_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg | 1 - ..._aa0.4_PC_Normal_Quality_Accurate.inst.cfg | 1 - ...s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg | 1 - ...a0.4_PETG_Normal_Quality_Accurate.inst.cfg | 1 - ...um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg | 1 - ..._s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg | 1 - ...aa0.4_PLA_Normal_Quality_Accurate.inst.cfg | 1 - ...5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg | 1 - ...m_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg | 1 - ...s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg | 1 - ...a0.4_TPLA_Normal_Quality_Accurate.inst.cfg | 1 - ..._aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg | 1 - .../um2p_abs_0.25_normal.inst.cfg | 1 - .../um2p_abs_0.4_fast.inst.cfg | 1 - .../um2p_abs_0.4_high.inst.cfg | 1 - .../um2p_abs_0.4_normal.inst.cfg | 1 - .../um2p_abs_0.6_normal.inst.cfg | 1 - .../um2p_abs_0.8_normal.inst.cfg | 1 - .../um2p_cpe_0.25_normal.inst.cfg | 1 - .../um2p_cpe_0.4_fast.inst.cfg | 1 - .../um2p_cpe_0.4_high.inst.cfg | 1 - .../um2p_cpe_0.4_normal.inst.cfg | 1 - .../um2p_cpe_0.6_normal.inst.cfg | 1 - .../um2p_cpe_0.8_normal.inst.cfg | 1 - .../um2p_cpep_0.4_draft.inst.cfg | 1 - .../um2p_cpep_0.4_normal.inst.cfg | 1 - .../um2p_cpep_0.6_draft.inst.cfg | 1 - .../um2p_cpep_0.6_normal.inst.cfg | 1 - .../um2p_cpep_0.8_draft.inst.cfg | 1 - .../um2p_cpep_0.8_normal.inst.cfg | 1 - .../um2p_nylon_0.25_high.inst.cfg | 1 - .../um2p_nylon_0.25_normal.inst.cfg | 1 - .../um2p_nylon_0.4_fast.inst.cfg | 1 - .../um2p_nylon_0.4_normal.inst.cfg | 1 - .../um2p_nylon_0.6_fast.inst.cfg | 1 - .../um2p_nylon_0.6_normal.inst.cfg | 1 - .../um2p_nylon_0.8_draft.inst.cfg | 1 - .../um2p_nylon_0.8_normal.inst.cfg | 1 - .../um2p_pc_0.25_high.inst.cfg | 1 - .../um2p_pc_0.25_normal.inst.cfg | 1 - .../ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg | 1 - .../um2p_pc_0.4_normal.inst.cfg | 1 - .../ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg | 1 - .../um2p_pc_0.6_normal.inst.cfg | 1 - .../um2p_pc_0.8_draft.inst.cfg | 1 - .../um2p_pc_0.8_normal.inst.cfg | 1 - .../ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg | 4 - .../um2p_pp_0.4_normal.inst.cfg | 4 - .../um2p_pp_0.6_draft.inst.cfg | 4 - .../ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg | 4 - .../um2p_pp_0.8_draft.inst.cfg | 4 - .../um2p_pp_0.8_verydraft.inst.cfg | 4 - .../um2p_tpu_0.25_high.inst.cfg | 1 - .../um2p_tpu_0.4_normal.inst.cfg | 1 - .../um2p_tpu_0.6_fast.inst.cfg | 1 - .../um2pc_abs_0.25_normal.inst.cfg | 1 - .../um2pc_abs_0.4_fast.inst.cfg | 1 - .../um2pc_abs_0.4_high.inst.cfg | 1 - .../um2pc_abs_0.4_normal.inst.cfg | 1 - .../um2pc_abs_0.6_normal.inst.cfg | 1 - .../um2pc_abs_0.8_normal.inst.cfg | 1 - .../um2pc_cpe_0.25_normal.inst.cfg | 1 - .../um2pc_cpe_0.4_fast.inst.cfg | 1 - .../um2pc_cpe_0.4_high.inst.cfg | 1 - .../um2pc_cpe_0.4_normal.inst.cfg | 1 - .../um2pc_cpe_0.6_normal.inst.cfg | 1 - .../um2pc_cpe_0.8_normal.inst.cfg | 1 - .../um2pc_cpep_0.4_draft.inst.cfg | 1 - .../um2pc_cpep_0.4_normal.inst.cfg | 1 - .../um2pc_cpep_0.6_draft.inst.cfg | 1 - .../um2pc_cpep_0.6_normal.inst.cfg | 1 - .../um2pc_cpep_0.8_draft.inst.cfg | 1 - .../um2pc_cpep_0.8_normal.inst.cfg | 1 - .../um2pc_nylon_0.25_high.inst.cfg | 1 - .../um2pc_nylon_0.25_normal.inst.cfg | 1 - .../um2pc_nylon_0.4_fast.inst.cfg | 1 - .../um2pc_nylon_0.4_normal.inst.cfg | 1 - .../um2pc_nylon_0.6_fast.inst.cfg | 1 - .../um2pc_nylon_0.6_normal.inst.cfg | 1 - .../um2pc_nylon_0.8_draft.inst.cfg | 1 - .../um2pc_nylon_0.8_normal.inst.cfg | 1 - .../um2pc_pc_0.25_high.inst.cfg | 1 - .../um2pc_pc_0.25_normal.inst.cfg | 1 - .../um2pc_pc_0.4_fast.inst.cfg | 1 - .../um2pc_pc_0.4_normal.inst.cfg | 1 - .../um2pc_pc_0.6_fast.inst.cfg | 1 - .../um2pc_pc_0.6_normal.inst.cfg | 1 - .../um2pc_pc_0.8_normal.inst.cfg | 1 - .../um2pc_petg_0.25_normal.inst.cfg | 1 - .../um2pc_petg_0.4_draft.inst.cfg | 1 - .../um2pc_petg_0.4_fast.inst.cfg | 1 - .../um2pc_petg_0.4_normal.inst.cfg | 1 - .../um2pc_petg_0.6_normal.inst.cfg | 1 - .../um2pc_petg_0.8_normal.inst.cfg | 1 - .../um2pc_pla_0.25_normal.inst.cfg | 1 - .../um2pc_pla_0.4_draft.inst.cfg | 1 - .../um2pc_pla_0.4_fast.inst.cfg | 1 - .../um2pc_pla_0.4_high.inst.cfg | 1 - .../um2pc_pla_0.4_normal.inst.cfg | 1 - .../um2pc_pla_0.6_normal.inst.cfg | 1 - .../um2pc_pla_0.8_normal.inst.cfg | 1 - .../um2pc_pp_0.4_fast.inst.cfg | 4 - .../um2pc_pp_0.4_normal.inst.cfg | 4 - .../um2pc_pp_0.6_draft.inst.cfg | 4 - .../um2pc_pp_0.6_fast.inst.cfg | 4 - .../um2pc_pp_0.8_draft.inst.cfg | 4 - .../um2pc_pp_0.8_verydraft.inst.cfg | 4 - .../um2pc_tpla_0.25_normal.inst.cfg | 1 - .../um2pc_tpla_0.4_draft.inst.cfg | 1 - .../um2pc_tpla_0.4_fast.inst.cfg | 1 - .../um2pc_tpla_0.4_normal.inst.cfg | 1 - .../um2pc_tpla_0.6_normal.inst.cfg | 1 - .../um2pc_tpla_0.8_normal.inst.cfg | 1 - .../um2pc_tpu_0.25_high.inst.cfg | 1 - .../um2pc_tpu_0.4_normal.inst.cfg | 1 - .../um2pc_tpu_0.6_fast.inst.cfg | 1 - .../um3_aa0.25_PC_Normal_Quality.inst.cfg | 2 - .../um3_aa0.25_PLA_Normal_Quality.inst.cfg | 3 - .../um3_aa0.25_PP_Normal_Quality.inst.cfg | 3 - .../um3_aa0.25_TPLA_Normal_Quality.inst.cfg | 3 - .../um3_aa0.4_ABS_Draft_Print.inst.cfg | 1 - .../um3_aa0.4_ABS_Fast_Print.inst.cfg | 1 - .../um3_aa0.4_ABS_High_Quality.inst.cfg | 2 - .../um3_aa0.4_ABS_Normal_Quality.inst.cfg | 2 - .../um3_aa0.4_BAM_Draft_Print.inst.cfg | 2 - .../um3_aa0.4_BAM_Fast_Print.inst.cfg | 2 - .../um3_aa0.4_BAM_Normal_Quality.inst.cfg | 2 - .../um3_aa0.4_CPEP_Draft_Print.inst.cfg | 2 - .../um3_aa0.4_CPEP_Fast_Print.inst.cfg | 2 - .../um3_aa0.4_CPEP_High_Quality.inst.cfg | 2 - .../um3_aa0.4_CPEP_Normal_Quality.inst.cfg | 2 - .../um3_aa0.4_CPE_Draft_Print.inst.cfg | 1 - .../um3_aa0.4_CPE_Fast_Print.inst.cfg | 1 - .../um3_aa0.4_CPE_High_Quality.inst.cfg | 1 - .../um3_aa0.4_CPE_Normal_Quality.inst.cfg | 1 - .../um3_aa0.4_Nylon_Draft_Print.inst.cfg | 1 - .../um3_aa0.4_Nylon_Fast_Print.inst.cfg | 1 - .../um3_aa0.4_Nylon_High_Quality.inst.cfg | 1 - .../um3_aa0.4_Nylon_Normal_Quality.inst.cfg | 1 - .../um3_aa0.4_PC_Draft_Print.inst.cfg | 2 - .../um3_aa0.4_PC_Fast_Print.inst.cfg | 2 - .../um3_aa0.4_PC_High_Quality.inst.cfg | 2 - .../um3_aa0.4_PC_Normal_Quality.inst.cfg | 2 - .../um3_aa0.4_PETG_Draft_Print.inst.cfg | 1 - .../um3_aa0.4_PETG_Fast_Print.inst.cfg | 1 - .../um3_aa0.4_PETG_Normal_Quality.inst.cfg | 1 - .../um3_aa0.4_PLA_Draft_Print.inst.cfg | 2 - .../um3_aa0.4_PLA_Fast_Print.inst.cfg | 2 - .../um3_aa0.4_PLA_High_Quality.inst.cfg | 2 - .../um3_aa0.4_PLA_Normal_Quality.inst.cfg | 2 - .../um3_aa0.4_PP_Draft_Print.inst.cfg | 3 - .../um3_aa0.4_PP_Fast_Print.inst.cfg | 3 - .../um3_aa0.4_PP_Normal_Quality.inst.cfg | 3 - .../um3_aa0.4_TPLA_Draft_Print.inst.cfg | 3 - .../um3_aa0.4_TPLA_Fast_Print.inst.cfg | 3 - .../um3_aa0.4_TPLA_Normal_Quality.inst.cfg | 3 - .../um3_aa0.4_TPU_Draft_Print.inst.cfg | 2 - .../um3_aa0.4_TPU_Fast_Print.inst.cfg | 2 - .../um3_aa0.4_TPU_Normal_Quality.inst.cfg | 2 - .../um3_aa0.8_CPEP_Fast_Print.inst.cfg | 4 - .../um3_aa0.8_CPEP_Superdraft_Print.inst.cfg | 4 - .../um3_aa0.8_CPEP_Verydraft_Print.inst.cfg | 4 - .../um3_aa0.8_PC_Fast_Print.inst.cfg | 4 - .../um3_aa0.8_PC_Superdraft_Print.inst.cfg | 4 - .../um3_aa0.8_PC_Verydraft_Print.inst.cfg | 4 - .../um3_aa0.8_PLA_Draft_Print.inst.cfg | 1 - .../um3_aa0.8_PLA_Superdraft_Print.inst.cfg | 1 - .../um3_aa0.8_PLA_Verydraft_Print.inst.cfg | 1 - .../um3_aa0.8_PP_Draft_Print.inst.cfg | 1 - .../um3_aa0.8_PP_Superdraft_Print.inst.cfg | 1 - .../um3_aa0.8_PP_Verydraft_Print.inst.cfg | 1 - .../um3_aa0.8_TPLA_Draft_Print.inst.cfg | 2 - .../um3_aa0.8_TPLA_Superdraft_Print.inst.cfg | 2 - .../um3_aa0.8_TPLA_Verydraft_Print.inst.cfg | 3 - .../um3_aa0.8_TPU_Draft_Print.inst.cfg | 1 - .../um3_aa0.8_TPU_Superdraft_Print.inst.cfg | 1 - .../um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 1 - ...um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg | 1 - .../um_s3_aa0.25_PC_Normal_Quality.inst.cfg | 2 - .../um_s3_aa0.25_PETG_Normal_Quality.inst.cfg | 1 - .../um_s3_aa0.25_PLA_Normal_Quality.inst.cfg | 3 - .../um_s3_aa0.25_PP_Normal_Quality.inst.cfg | 3 - .../um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg | 3 - .../um_s3_aa0.4_ABS_Draft_Print.inst.cfg | 1 - .../um_s3_aa0.4_ABS_Fast_Print.inst.cfg | 1 - .../um_s3_aa0.4_ABS_High_Quality.inst.cfg | 1 - .../um_s3_aa0.4_ABS_Normal_Quality.inst.cfg | 1 - .../um_s3_aa0.4_BAM_Draft_Print.inst.cfg | 2 - .../um_s3_aa0.4_BAM_Fast_Print.inst.cfg | 2 - .../um_s3_aa0.4_BAM_Normal_Quality.inst.cfg | 2 - .../um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg | 2 - .../um_s3_aa0.4_CPEP_Draft_Print.inst.cfg | 2 - .../um_s3_aa0.4_CPEP_Fast_Print.inst.cfg | 2 - .../um_s3_aa0.4_CPEP_High_Quality.inst.cfg | 2 - .../um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg | 2 - .../um_s3_aa0.4_CPE_Draft_Print.inst.cfg | 1 - .../um_s3_aa0.4_CPE_Fast_Print.inst.cfg | 1 - .../um_s3_aa0.4_CPE_High_Quality.inst.cfg | 1 - .../um_s3_aa0.4_CPE_Normal_Quality.inst.cfg | 1 - .../um_s3_aa0.4_Nylon_Draft_Print.inst.cfg | 1 - .../um_s3_aa0.4_Nylon_Fast_Print.inst.cfg | 1 - .../um_s3_aa0.4_Nylon_High_Quality.inst.cfg | 1 - .../um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg | 1 - .../um_s3_aa0.4_PC_Draft_Print.inst.cfg | 2 - .../um_s3_aa0.4_PC_Fast_Print.inst.cfg | 2 - .../um_s3_aa0.4_PC_High_Quality.inst.cfg | 2 - .../um_s3_aa0.4_PC_Normal_Quality.inst.cfg | 2 - .../um_s3_aa0.4_PETG_Draft_Print.inst.cfg | 2 - .../um_s3_aa0.4_PETG_Fast_Print.inst.cfg | 2 - .../um_s3_aa0.4_PETG_High_Quality.inst.cfg | 2 - .../um_s3_aa0.4_PETG_Normal_Quality.inst.cfg | 2 - .../um_s3_aa0.4_PLA_Draft_Print.inst.cfg | 3 - .../um_s3_aa0.4_PLA_Fast_Print.inst.cfg | 3 - .../um_s3_aa0.4_PLA_High_Quality.inst.cfg | 3 - .../um_s3_aa0.4_PLA_Normal_Quality.inst.cfg | 3 - .../um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg | 1 - .../um_s3_aa0.4_PP_Draft_Print.inst.cfg | 3 - .../um_s3_aa0.4_PP_Fast_Print.inst.cfg | 3 - .../um_s3_aa0.4_PP_Normal_Quality.inst.cfg | 3 - .../um_s3_aa0.4_TPLA_Draft_Print.inst.cfg | 3 - .../um_s3_aa0.4_TPLA_Fast_Print.inst.cfg | 3 - .../um_s3_aa0.4_TPLA_High_Quality.inst.cfg | 3 - .../um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg | 3 - .../um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg | 1 - .../um_s3_aa0.4_TPU_Draft_Print.inst.cfg | 2 - .../um_s3_aa0.4_TPU_Fast_Print.inst.cfg | 2 - .../um_s3_aa0.4_TPU_Normal_Quality.inst.cfg | 2 - .../um_s3_aa0.8_CPEP_Fast_Print.inst.cfg | 4 - ...um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg | 4 - .../um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg | 4 - .../um_s3_aa0.8_PC_Fast_Print.inst.cfg | 4 - .../um_s3_aa0.8_PC_Superdraft_Print.inst.cfg | 4 - .../um_s3_aa0.8_PC_Verydraft_Print.inst.cfg | 4 - .../um_s3_aa0.8_PETG_Draft_Print.inst.cfg | 1 - ...um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg | 1 - .../um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg | 2 - .../um_s3_aa0.8_PLA_Draft_Print.inst.cfg | 2 - .../um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg | 2 - .../um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg | 2 - .../um_s3_aa0.8_PP_Draft_Print.inst.cfg | 1 - .../um_s3_aa0.8_PP_Superdraft_Print.inst.cfg | 1 - .../um_s3_aa0.8_PP_Verydraft_Print.inst.cfg | 1 - .../um_s3_aa0.8_TPLA_Draft_Print.inst.cfg | 2 - ...um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg | 2 - .../um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg | 3 - .../um_s3_aa0.8_TPU_Draft_Print.inst.cfg | 1 - .../um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg | 1 - .../um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg | 1 - .../um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg | 2 - .../um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg | 2 - .../um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg | 2 - .../um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg | 2 - .../um_s3_cc0.4_PLA_Draft_Print.inst.cfg | 1 - .../um_s3_cc0.4_PLA_Fast_Print.inst.cfg | 1 - .../um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg | 2 - .../um_s3_cc0.6_PLA_Draft_Print.inst.cfg | 1 - .../um_s3_cc0.6_PLA_Fast_Print.inst.cfg | 1 - .../um_s5_aa0.25_PC_Normal_Quality.inst.cfg | 2 - .../um_s5_aa0.25_PETG_Normal_Quality.inst.cfg | 1 - .../um_s5_aa0.25_PLA_Normal_Quality.inst.cfg | 3 - .../um_s5_aa0.25_PP_Normal_Quality.inst.cfg | 3 - .../um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg | 3 - .../um_s5_aa0.4_ABS_Draft_Print.inst.cfg | 1 - .../um_s5_aa0.4_ABS_Fast_Print.inst.cfg | 1 - .../um_s5_aa0.4_ABS_High_Quality.inst.cfg | 1 - .../um_s5_aa0.4_ABS_Normal_Quality.inst.cfg | 1 - .../um_s5_aa0.4_BAM_Draft_Print.inst.cfg | 2 - .../um_s5_aa0.4_BAM_Fast_Print.inst.cfg | 2 - .../um_s5_aa0.4_BAM_Normal_Quality.inst.cfg | 2 - .../um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg | 2 - .../um_s5_aa0.4_CPEP_Draft_Print.inst.cfg | 2 - .../um_s5_aa0.4_CPEP_Fast_Print.inst.cfg | 2 - .../um_s5_aa0.4_CPEP_High_Quality.inst.cfg | 2 - .../um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg | 2 - .../um_s5_aa0.4_CPE_Draft_Print.inst.cfg | 1 - .../um_s5_aa0.4_CPE_Fast_Print.inst.cfg | 1 - .../um_s5_aa0.4_CPE_High_Quality.inst.cfg | 1 - .../um_s5_aa0.4_CPE_Normal_Quality.inst.cfg | 1 - .../um_s5_aa0.4_Nylon_Draft_Print.inst.cfg | 1 - .../um_s5_aa0.4_Nylon_Fast_Print.inst.cfg | 1 - .../um_s5_aa0.4_Nylon_High_Quality.inst.cfg | 1 - .../um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg | 1 - .../um_s5_aa0.4_PC_Draft_Print.inst.cfg | 2 - .../um_s5_aa0.4_PC_Fast_Print.inst.cfg | 2 - .../um_s5_aa0.4_PC_High_Quality.inst.cfg | 2 - .../um_s5_aa0.4_PC_Normal_Quality.inst.cfg | 2 - .../um_s5_aa0.4_PETG_Draft_Print.inst.cfg | 2 - .../um_s5_aa0.4_PETG_Fast_Print.inst.cfg | 2 - .../um_s5_aa0.4_PETG_High_Quality.inst.cfg | 2 - .../um_s5_aa0.4_PETG_Normal_Quality.inst.cfg | 2 - .../um_s5_aa0.4_PLA_Draft_Print.inst.cfg | 3 - .../um_s5_aa0.4_PLA_Fast_Print.inst.cfg | 3 - .../um_s5_aa0.4_PLA_High_Quality.inst.cfg | 3 - .../um_s5_aa0.4_PLA_Normal_Quality.inst.cfg | 3 - .../um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg | 1 - .../um_s5_aa0.4_PP_Draft_Print.inst.cfg | 3 - .../um_s5_aa0.4_PP_Fast_Print.inst.cfg | 3 - .../um_s5_aa0.4_PP_Normal_Quality.inst.cfg | 3 - .../um_s5_aa0.4_TPLA_Draft_Print.inst.cfg | 3 - .../um_s5_aa0.4_TPLA_Fast_Print.inst.cfg | 3 - .../um_s5_aa0.4_TPLA_High_Quality.inst.cfg | 3 - .../um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg | 3 - .../um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg | 1 - .../um_s5_aa0.4_TPU_Draft_Print.inst.cfg | 2 - .../um_s5_aa0.4_TPU_Fast_Print.inst.cfg | 2 - .../um_s5_aa0.4_TPU_Normal_Quality.inst.cfg | 2 - .../um_s5_aa0.8_CPEP_Fast_Print.inst.cfg | 4 - ...um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg | 4 - .../um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg | 4 - .../um_s5_aa0.8_PC_Fast_Print.inst.cfg | 4 - .../um_s5_aa0.8_PC_Superdraft_Print.inst.cfg | 4 - .../um_s5_aa0.8_PC_Verydraft_Print.inst.cfg | 4 - .../um_s5_aa0.8_PETG_Draft_Print.inst.cfg | 1 - ...um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg | 1 - .../um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg | 1 - .../um_s5_aa0.8_PLA_Draft_Print.inst.cfg | 2 - .../um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg | 2 - .../um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg | 2 - .../um_s5_aa0.8_PP_Draft_Print.inst.cfg | 1 - .../um_s5_aa0.8_PP_Superdraft_Print.inst.cfg | 1 - .../um_s5_aa0.8_PP_Verydraft_Print.inst.cfg | 1 - .../um_s5_aa0.8_TPLA_Draft_Print.inst.cfg | 2 - ...um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg | 2 - .../um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg | 3 - .../um_s5_aa0.8_TPU_Draft_Print.inst.cfg | 1 - .../um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg | 1 - .../um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg | 1 - .../um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg | 2 - .../um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg | 2 - .../um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg | 2 - .../um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg | 2 - .../um_s5_cc0.4_PLA_Draft_Print.inst.cfg | 1 - .../um_s5_cc0.4_PLA_Fast_Print.inst.cfg | 1 - .../um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg | 2 - .../um_s5_cc0.6_PLA_Draft_Print.inst.cfg | 1 - .../um_s5_cc0.6_PLA_Fast_Print.inst.cfg | 1 - resources/variants/ultimaker3_aa0.25.inst.cfg | 2 - resources/variants/ultimaker3_aa0.8.inst.cfg | 1 - resources/variants/ultimaker3_bb0.8.inst.cfg | 1 - resources/variants/ultimaker3_bb04.inst.cfg | 1 - .../ultimaker3_extended_aa0.25.inst.cfg | 2 - .../ultimaker3_extended_aa0.8.inst.cfg | 1 - .../ultimaker3_extended_bb0.8.inst.cfg | 1 - .../ultimaker3_extended_bb04.inst.cfg | 1 - .../variants/ultimaker_s3_aa0.25.inst.cfg | 2 - .../variants/ultimaker_s3_aa0.8.inst.cfg | 1 - .../variants/ultimaker_s3_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s3_bb04.inst.cfg | 1 - resources/variants/ultimaker_s3_cc04.inst.cfg | 2 - resources/variants/ultimaker_s3_cc06.inst.cfg | 2 - .../variants/ultimaker_s5_aa0.25.inst.cfg | 2 - .../variants/ultimaker_s5_aa0.8.inst.cfg | 1 - .../variants/ultimaker_s5_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s5_bb04.inst.cfg | 1 - resources/variants/ultimaker_s5_cc04.inst.cfg | 2 - resources/variants/ultimaker_s5_cc06.inst.cfg | 2 - 407 files changed, 117 insertions(+), 968 deletions(-) diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index c63169fc3a..387ea39985 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -9,292 +9,117 @@ "exclude_materials": [ "generic_hips", "structur3d_dap100silicone" ] }, "overrides": { - "machine_max_feedrate_e": { - "default_value": 45 + "acceleration_layer_0": { "value": "acceleration_topbottom" }, + "acceleration_travel_enabled": { "value": false }, + "bottom_layers": { "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))" }, + "bridge_enable_more_layers": { "value": false }, + "bridge_fan_speed": { "value": "cool_fan_speed_max" }, + "bridge_fan_speed_2": { "value": "cool_fan_speed" }, + "bridge_fan_speed_3": { "value": "cool_fan_speed" }, + "bridge_settings_enabled": { "value": true }, + "bridge_skin_density": { "value": "80" }, + "bridge_skin_density_2": { "value": 100 }, + "bridge_skin_density_3": { "value": 100 }, + "bridge_skin_material_flow": { "value": "skin_material_flow" }, + "bridge_skin_material_flow_2": { "value": "skin_material_flow" }, + "bridge_skin_material_flow_3": { "value": "skin_material_flow" }, + "bridge_skin_speed": { "value": "speed_topbottom" }, + "bridge_skin_speed_2": { "value": "speed_topbottom" }, + "bridge_skin_speed_3": { "value": "speed_topbottom" }, + "bridge_skin_support_threshold": { "value": 50 }, + "bridge_sparse_infill_max_density": { "value": 0 }, + "bridge_wall_coast": { "value": 0 }, + "bridge_wall_material_flow": { "value": "wall_material_flow" }, + "bridge_wall_speed": { "value": "bridge_skin_speed" }, + "cool_fan_speed_0": { "value": "cool_fan_speed" }, + "gradual_support_infill_steps": { "value": "2 if support_interface_enable else 0" }, + "gradual_support_infill_step_height": { "value": "4 * layer_height" }, + "infill_material_flow": { "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" }, + "inset_direction": { "value": "'outside_in'" }, + "jerk_infill": { "minimum_value_warning": 20 }, + "jerk_wall": { "minimum_value_warning": 20 }, + "jerk_wall_0": { "minimum_value_warning": 20 }, + "jerk_prime_tower": { "minimum_value_warning": 20 }, + "jerk_print": + { + "value": "20", + "minimum_value_warning": 20 }, - "material_print_temperature": { - "minimum_value": "0" - }, - "material_bed_temperature": { + "jerk_print_layer_0": { "value": "max(20, jerk_wall_0)" }, + "jerk_roofing": { "minimum_value_warning": 20 }, + "jerk_support": { "minimum_value_warning": 20 }, + "jerk_support_infill": { "minimum_value_warning": 20 }, + "jerk_support_interface": { "minimum_value_warning": 20 }, + "jerk_topbottom": { "minimum_value_warning": 20 }, + "jerk_travel": { "value": "jerk_print" }, + "jerk_travel_enabled": { "value": false }, + "layer_height_0": { "value": "max(0.2, layer_height)" }, + "line_width": { "value": "machine_nozzle_size" }, + "machine_max_feedrate_e": { "default_value": 45 }, + "material_bed_temperature": + { "minimum_value": "0", "maximum_value_warning": "125" }, - "material_bed_temperature_layer_0": + "material_bed_temperature_layer_0": { "maximum_value_warning": "125" }, + "material_print_temperature": { "minimum_value": "0" }, + "material_standby_temperature": { - "maximum_value_warning": "125" - }, - "material_standby_temperature": { "value": "material_print_temperature - 100", "minimum_value": "0" }, - "extruder_prime_pos_y": - { - "minimum_value": "0", - "maximum_value": "machine_depth" - }, - "extruder_prime_pos_x": - { - "minimum_value": "0", - "maximum_value": "machine_width" - }, + "meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" }, + "meshfix_maximum_resolution": { "value": "max(speed_wall_0 / 75, 0.5)" }, + "minimum_support_area": { "value": "(2 + support_offset)**2" }, + "raft_base_speed": { "value": "raft_speed" }, + "raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" }, + "raft_interface_fan_speed": { "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" }, + "raft_interface_line_width": { "value": "(raft_base_line_width + raft_surface_line_width) / 2" }, + "raft_interface_speed": { "value": "(raft_surface_speed + raft_base_speed) / 2" }, + "raft_interface_thickness": { "value": "(raft_base_thickness + raft_surface_thickness) / 2" }, + "raft_speed": { "value": 15 }, + "raft_surface_fan_speed": { "value": "cool_fan_speed" }, + "raft_surface_speed": { "value": "speed_topbottom" }, "relative_extrusion": { "value": false, "enabled": false }, - "skin_angles": { - "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" - }, - "line_width": { - "value": "machine_nozzle_size" - }, - "wall_thickness": { - "value": "wall_line_width_0 + wall_line_width_x" - }, - "infill_material_flow": { - "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" - }, - "inset_direction": { - "value": "'outside_in'" - }, - "retraction_combing": { - "value": "'no_outer_surfaces'" - }, - "retraction_count_max": { - "value": 25 - }, - "retraction_extrusion_window": { - "value": 1 - }, - "roofing_layer_count": { - "value": "1" - }, - "roofing_material_flow": { - "value": "material_flow" - }, - "skin_material_flow": { - "value": "0.95 * material_flow" - }, - "support_interface_material_flow": { - "value": "skin_material_flow" - }, - "skin_monotonic" : { - "value": "roofing_layer_count == 0" - }, - "speed_equalize_flow_width_factor": { - "value": "110.0" - }, - "top_layers": { - "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" - }, - "bottom_layers": { - "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))" - }, - "xy_offset": { - "value": "-layer_height * 0.1" - }, - "meshfix_maximum_resolution": { - "value": "max(speed_wall_0 / 75, 0.5)" - }, - "meshfix_maximum_deviation": { - "value": "machine_nozzle_size / 10" - }, - "jerk_travel_enabled": { - "value": false - }, - "acceleration_travel_enabled": { - "value": false - }, - "acceleration_travel": { - "value": "acceleration_wall" - }, - "skin_edge_support_thickness": { - "value": "4 * layer_height if infill_sparse_density < 30 else 0" - }, - "bridge_settings_enabled": { - "value": true - }, - "bridge_skin_support_threshold": { - "value": 50 - }, - "bridge_sparse_infill_max_density": { - "value": 0 - }, - "bridge_wall_coast": { - "value": 0 - }, - "bridge_wall_speed": { - "value": "bridge_skin_speed" - }, - "bridge_wall_material_flow": { - "value": "wall_material_flow" - }, - "bridge_skin_speed": { - "value": "speed_topbottom" - }, - "bridge_skin_material_flow": { - "value": "skin_material_flow" - }, - "bridge_skin_density": { - "value": "80" - }, - "bridge_fan_speed": { - "value": "cool_fan_speed_max" - }, - "bridge_enable_more_layers": { - "value": false - }, - "bridge_skin_speed_2": { - "value": "speed_topbottom" - }, - "bridge_skin_material_flow_2": { - "value": "skin_material_flow" - }, - "bridge_skin_density_2": { - "value": 100 - }, - "bridge_fan_speed_2": { - "value": "cool_fan_speed_min" - }, - "bridge_skin_speed_3": { - "value": "speed_topbottom" - }, - "bridge_skin_material_flow_3": { - "value": "skin_material_flow" - }, - "bridge_skin_density_3": { - "value": 100 - }, - "bridge_fan_speed_3": { - "value": "cool_fan_speed_min" - }, - "jerk_print": { - "value": "20", - "minimum_value_warning": 20 - }, - "jerk_infill": { - "minimum_value_warning": 20 - }, - "jerk_wall": { - "minimum_value_warning": 20 - }, - "jerk_wall_0": { - "minimum_value_warning": 20 - }, - "jerk_roofing": { - "minimum_value_warning": 20 - }, - "jerk_topbottom": { - "minimum_value_warning": 20 - }, - "jerk_support": { - "minimum_value_warning": 20 - }, - "jerk_support_infill": { - "minimum_value_warning": 20 - }, - "jerk_support_interface": { - "minimum_value_warning": 20 - }, - "jerk_prime_tower": { - "minimum_value_warning": 20 - }, - "jerk_layer_0": { - "minimum_value_warning": 20 - }, - "jerk_print_layer_0": { - "minimum_value_warning": 20 - }, - "jerk_travel": { - "value": "jerk_print", - "minimum_value_warning": 20 - }, - "jerk_travel_layer_0": { - "minimum_value_warning": 20 - }, - "jerk_skirt_brim": { - "minimum_value_warning": 20 - }, - "support_wall_count": { - "value": "1 if support_structure == 'tree' else 0" - }, - "zig_zaggify_support": { - "value": true - }, - "support_infill_rate": { - "value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15" - }, - "support_line_distance": { - "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" - }, - "support_initial_layer_line_distance": { - "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" - }, - "gradual_support_infill_steps": { - "value": "2 if support_interface_enable else 0" - }, - "gradual_support_infill_step_height": { - "value": "4 * layer_height" - }, - "raft_base_speed": { - "value": "raft_speed" - }, - "raft_base_thickness": { - "value": "min(machine_nozzle_size * 0.75, 0.3)" - }, - "raft_interface_fan_speed": { - "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" - }, - "raft_interface_line_width": { - "value": "(raft_base_line_width + raft_surface_line_width) / 2" - }, - "raft_interface_speed": { - "value": "(raft_surface_speed + raft_base_speed) / 2" - }, - "raft_interface_thickness": { - "value": "(raft_base_thickness + raft_surface_thickness) / 2" - }, - "raft_speed": { - "value": 15 - }, - "raft_surface_fan_speed": { - "value": "cool_fan_speed" - }, - "raft_surface_speed": { - "value": "speed_topbottom" - }, - "support_interface_height": { - "value": "2 * layer_height" - }, - "support_offset": { - "value": "support_xy_distance if support_interface_enable else 0" - }, - "support_xy_distance": { - "value": "1" - }, - "support_xy_distance_overhang": { - "value": "0.2" - }, - "minimum_support_area": { - "value": "(2 + support_offset)**2" - }, - "support_interface_skip_height": { - "value": "layer_height" - }, - "support_interface_pattern": { - "value": "'concentric'" - }, - "support_interface_offset": { - "value": "support_offset" - }, - "support_use_towers": { - "value": false - }, - "support_z_distance": { - "value": "0" - }, - "top_bottom_pattern": { - "value": "'zigzag'" - } + "retraction_combing": { "value": "'no_outer_surfaces'" }, + "retraction_count_max": { "value": 25 }, + "retraction_extrusion_window": { "value": 1 }, + "roofing_layer_count": { "value": "1" }, + "roofing_material_flow": { "value": "material_flow" }, + "skin_angles": { "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" }, + "skin_edge_support_thickness": { "value": "4 * layer_height if infill_sparse_density < 30 else 0" }, + "skin_material_flow": { "value": "0.95 * material_flow" }, + "skin_material_flow_layer_0": { "value": 80 }, + "skin_monotonic" : { "value": "roofing_layer_count == 0" }, + "speed_equalize_flow_width_factor": { "value": "110.0" }, + "speed_layer_0": { "value": "min(30, layer_height / layer_height_0 * speed_wall_0)" }, + "speed_slowdown_layers": { "value": 1 }, + "speed_travel_layer_0": { "value": "speed_travel" }, + "support_infill_rate": { "value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15" }, + "support_initial_layer_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" }, + "support_interface_height": { "value": "2 * layer_height" }, + "support_interface_material_flow": { "value": "skin_material_flow" }, + "support_interface_offset": { "value": "support_offset" }, + "support_interface_pattern": { "value": "'concentric'" }, + "support_interface_skip_height": { "value": "layer_height" }, + "support_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" }, + "support_offset": { "value": "support_xy_distance if support_interface_enable else 0" }, + "support_use_towers": { "value": false }, + "support_wall_count": { "value": "1 if support_structure == 'tree' else 0" }, + "support_xy_distance": { "value": "1" }, + "support_xy_distance_overhang": { "value": "0.2" }, + "support_z_distance": { "value": "0" }, + "top_bottom_pattern": { "value": "'zigzag'" }, + "top_layers": { "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" }, + "wall_0_material_flow_layer_0": { "value": 110 }, + "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }, + "wall_x_material_flow_layer_0": { "value": 95 }, + "xy_offset": { "value": "-layer_height * 0.1" }, + "xy_offset_layer_0": { "value": "-wall_line_width_0 / 5 + xy_offset" }, + "zig_zaggify_support": { "value": true } } } diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index 5399abc02b..b28ce07770 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -89,6 +89,15 @@ }, "support_z_distance": { "value": "0.1" + }, + "cool_fan_speed_0": { + "value": 0 + }, + "layer_height_0": { + "value": 0.3 + }, + "speed_slowdown_layers": { + "value": 2 } } } diff --git a/resources/definitions/ultimaker2_plus_connect.def.json b/resources/definitions/ultimaker2_plus_connect.def.json index 6a69bb8ff4..5674b4f030 100644 --- a/resources/definitions/ultimaker2_plus_connect.def.json +++ b/resources/definitions/ultimaker2_plus_connect.def.json @@ -70,7 +70,6 @@ "maximum_value": 260 }, "material_print_temperature_layer_0": { - "value": "material_print_temperature", "maximum_value": 260 }, "machine_start_gcode": { "value": "''" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index fad1eaf2ea..eb19058a98 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -82,7 +82,6 @@ "prime_blob_enable": { "enabled": true, "default_value": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" }, "acceleration_enabled": { "value": true }, - "acceleration_layer_0": { "value": "acceleration_topbottom" }, "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, "acceleration_print": { "value": "3500" }, "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, @@ -91,21 +90,17 @@ "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" }, "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 3500)" }, "brim_width": { "value": "3" }, - "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" }, "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, "infill_overlap": { "value": "0" }, "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, - "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, - "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, "machine_min_cool_heat_time_window": { "value": "15" }, "default_material_print_temperature": { "value": "200" }, - "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" }, "material_bed_temperature": { "maximum_value": "115" }, "material_bed_temperature_layer_0": { "maximum_value": "115" }, "multiple_mesh_overlap": { "value": "0" }, @@ -118,7 +113,6 @@ "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "skin_overlap": { "value": "10" }, - "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, "speed_support": { "value": "speed_wall_0" }, diff --git a/resources/definitions/ultimaker_original.def.json b/resources/definitions/ultimaker_original.def.json index 15b381f4da..e9afb3977e 100644 --- a/resources/definitions/ultimaker_original.def.json +++ b/resources/definitions/ultimaker_original.def.json @@ -62,6 +62,15 @@ }, "infill_before_walls": { "value": "False" + }, + "cool_fan_speed_0": { + "value": 0 + }, + "layer_height_0": { + "value": 0.3 + }, + "speed_slowdown_layers": { + "value": 2 } } } diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index 78986133a7..ce94981307 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -74,8 +74,6 @@ "maximum_value": "150", "value": "150" }, - - "acceleration_layer_0": { "value": "acceleration_topbottom" }, "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, "acceleration_print": { "value": "3500" }, "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, @@ -84,7 +82,6 @@ "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" }, "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" }, "brim_width": { "value": "3" }, - "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" }, "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, @@ -92,7 +89,6 @@ "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, - "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, "machine_min_cool_heat_time_window": { "value": "15" }, @@ -108,7 +104,6 @@ "retraction_prime_speed": { "value": "15" }, "retraction_speed": {"value": "45" }, "skin_overlap": { "value": "10" }, - "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, "speed_support": { "value": "speed_wall_0" }, @@ -123,7 +118,6 @@ "top_bottom_thickness": { "value": "1" }, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, - "initial_layer_line_width_factor": { "value": "120" }, "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" } } } diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 33b3f926e5..a77148c2c4 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -77,7 +77,6 @@ "value": "150" }, "acceleration_enabled": { "value": true }, - "acceleration_layer_0": { "value": "acceleration_topbottom" }, "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, "acceleration_print": { "value": "3500" }, "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" }, @@ -86,7 +85,6 @@ "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" }, "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" }, "brim_width": { "value": "3" }, - "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" }, "cool_fan_speed": { "value": "50" }, "cool_fan_speed_max": { "value": "100" }, "cool_min_speed": { "value": "5" }, @@ -94,7 +92,6 @@ "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" }, "infill_wipe_dist": { "value": "0" }, "jerk_enabled": { "value": "True" }, - "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, "machine_min_cool_heat_time_window": { "value": "15" }, @@ -110,7 +107,6 @@ "retraction_prime_speed": { "value": "15" }, "retraction_speed": {"value": "45" }, "skin_overlap": { "value": "10" }, - "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, "speed_support": { "value": "speed_wall_0" }, @@ -126,7 +122,6 @@ "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, "wall_0_inset": { "value": "0" }, "optimize_wall_printing_order": { "value": "True" }, - "initial_layer_line_width_factor": { "value": "120" }, "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }, "build_volume_temperature": { "maximum_value": 50 } } diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg index 1a82100882..e14dbda7cb 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 infill_sparse_density = 15 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index 468528e62c..5cff46039c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index 48dee963d1..179307814c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index 5ece30afd9..82a4d92982 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index 4afeb44758..8d5a8b850c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index 85a2b0f773..a0dfd8446d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index 88843e549e..98c5c03d31 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index e0d70d45f2..933a1244f9 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index e60b654426..510abc623c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg index 944362e745..a4927b5ea3 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index 006b3cac4c..01540dc391 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index 2686ff7e34..a7e16320c0 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index d0f84a8755..58d731c741 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 8ca43ef884..9b188ea20b 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 infill_sparse_density = 15 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index 565387bed6..b2d6255ffc 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index d84c7c3a1a..b6d424ed18 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index 635949e3c8..9ca6820656 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ acceleration_wall_0 = 2000 infill_sparse_density = 10 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index b2557b3f5e..16fe2834fd 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 infill_sparse_density = 15 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 3b43a028b4..fcd34957cf 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index c8a0053010..b4aedc079f 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg index 95c584bdad..7107d528c5 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ acceleration_wall_0 = 2000 infill_sparse_density = 10 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg index 994699e382..9610a74f65 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 infill_sparse_density = 15 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index 592ca35859..aba6ae5d6c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index 6143b0d78d..85e5aca055 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index 6d729bcea9..2ba9053896 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index 86e7cc0505..a821280b7c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index 12902a388c..b6edb15aa5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index 642a8e2b3c..9212ed1114 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index 1725da9733..2630ec0620 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index 0bba4ccb0f..13c3824e70 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg index f3a372c8b2..4bfae56534 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index cca4d4af10..3f5b69eb4b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index 6b06cb6164..be2122599a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index 345dc02a8c..c1a3e4b79a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 2baf1418a4..eabaac92be 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 infill_sparse_density = 15 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index aa880fba07..af9f56b138 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index 65b3df86d6..210bef3cb9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index d38dd5d366..4e2a91e473 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ acceleration_wall_0 = 2000 infill_sparse_density = 10 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index 5c603860e5..d6388d296f 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 infill_sparse_density = 15 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 69f421288c..d1d32cdfbb 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index 079403efb2..76f4172ca5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg index 3d4390e7a4..cdfabcbc00 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg @@ -19,7 +19,6 @@ acceleration_wall_0 = 2000 infill_sparse_density = 10 jerk_print = 30 speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg index 398b9d1346..b71cb1818e 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg @@ -17,6 +17,5 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 22 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg index 73beeb926b..636d80f88c 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 18 -speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg index c358068633..0b379b030f 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 22 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg index 131516a328..7c53dbae9b 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg index 7af9ea0712..88d9cfd75f 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg @@ -18,6 +18,5 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 20 infill_sparse_density = 20 speed_infill = =math.ceil(speed_print * 55 / 40) -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg index 4a73cdbf88..13dff6de33 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg @@ -17,6 +17,5 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 25 cool_min_speed = 15 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg index 80638e4454..0e67f00011 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg @@ -17,6 +17,5 @@ cool_min_layer_time = 2 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 15 infill_sparse_density = 22 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg index b8b9a70ba1..bcd95dcfe2 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 18 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg index ccbb73fb05..1bcbd78cf4 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 2 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 15 infill_sparse_density = 22 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg index 1b61fbbc6e..51695edcb6 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg index 1b576cb257..6fc2e01428 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg @@ -17,6 +17,5 @@ cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 8 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg index ff23e83400..771f0acb92 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg @@ -17,6 +17,5 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 25 cool_min_speed = 8 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg index 49703c592d..fa23153639 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) speed_wall_0 = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg index 6503460702..dea75d9ed9 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =math.ceil(speed_print * 15 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index 9dec35e4a5..6474270331 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -22,7 +22,6 @@ infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index b3751e0bbc..615d33e045 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -22,7 +22,6 @@ infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg index 492d54f63c..8892494cdd 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =round(speed_print * 30 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) speed_wall_0 = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg index 79cd4cb0b2..f8772fd96c 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg index 21ed3ff9ee..601a7a8c89 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg @@ -22,7 +22,6 @@ infill_sparse_density = 25 layer_0_z_overlap = 0.1 raft_airgap = 0.15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg index 4746d98537..2d7a1b9fbf 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg @@ -22,7 +22,6 @@ infill_sparse_density = 25 layer_0_z_overlap = 0.1 raft_airgap = 0.15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg index 19d0dd03aa..ad9b46daf5 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.57 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg index 4e7e6981a5..6a6af68820 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.22 raft_airgap = 0.57 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg index 7e9be134b7..3b913494f9 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg @@ -21,7 +21,6 @@ infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.44 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg index c8bd8b8055..793368305e 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg @@ -21,7 +21,6 @@ infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.44 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg index c3eeef66a6..9c2c83a3e8 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg @@ -21,7 +21,6 @@ infill_sparse_density = 40 layer_0_z_overlap = 0.25 raft_airgap = 0.44 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg index 243169012a..58910f9ee1 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg @@ -21,7 +21,6 @@ infill_sparse_density = 40 layer_0_z_overlap = 0.25 raft_airgap = 0.44 retraction_hop_enabled = 0.2 -speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg index 6a15d8959d..1d86f0e63f 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 25 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True support_z_distance = 0.19 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg index 2c498c3e5b..aad6d28b15 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg @@ -22,7 +22,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 25 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True support_z_distance = 0.19 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg index 4bc50328e8..4b0cef2987 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) speed_wall_x = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg index f26d676a04..3bfce297fc 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 30 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) speed_wall_x = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg index 7adbef71a2..5f876392cc 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg index 8c627e7507..278a79a883 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 35 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg index a0422892c3..eeb3980a83 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.47 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 support_enable = True diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg index 3fa7cd089f..a464366220 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 40 layer_0_z_overlap = 0.22 raft_airgap = 0.47 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 support_enable = True diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 29a303c877..12343fc6f9 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -13,7 +13,6 @@ variant = 0.4 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -37,13 +35,11 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index 855f5c2288..317e519f28 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -13,7 +13,6 @@ variant = 0.4 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -37,13 +35,11 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index aa17d74a70..709d5e9be6 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -13,7 +13,6 @@ variant = 0.6 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index 75b8deff80..781efbeb66 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -13,7 +13,6 @@ variant = 0.6 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index 8a1fbc5a07..6e11c55e5a 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -13,7 +13,6 @@ variant = 0.8 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index fc6a0aad3f..e123522dc6 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -13,7 +13,6 @@ variant = 0.8 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg index 0c0e9e8913..bbc8553caf 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg @@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1 raft_airgap = 0.2 retraction_count_max = 15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg index 48d88baa8d..9db8ba979b 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 15 infill_sparse_density = 10 retraction_count_max = 15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg index 7d32b1e6c4..85cfcadeca 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg @@ -22,7 +22,6 @@ layer_0_z_overlap = 0.12 raft_airgap = 0.24 retraction_count_max = 15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg index 710e780247..8de70e8bb4 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.25_normal.inst.cfg @@ -17,6 +17,5 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg index 104c1894b2..69901fb504 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_fast.inst.cfg @@ -20,7 +20,6 @@ infill_sparse_density = 20 top_bottom_thickness = 0.75 speed_print = 55 speed_travel = 150 -speed_layer_0 = =round(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_infill = =math.ceil(speed_print * 55 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg index e4a7879323..d8c0c750af 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_high.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 10 infill_sparse_density = 20 top_bottom_thickness = 0.72 speed_print = 45 -speed_layer_0 = =round(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 30 / 45) speed_topbottom = =math.ceil(speed_print * 15 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg index 9fa3d78d87..c460fc345e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.4_normal.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 10 infill_sparse_density = 20 top_bottom_thickness = 0.8 speed_print = 45 -speed_layer_0 = =round(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 30 / 45) speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_infill = =math.ceil(speed_print * 45 / 45) \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg index da7b682633..343dcbde31 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.6_normal.inst.cfg @@ -18,6 +18,5 @@ cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 20 infill_sparse_density = 20 speed_infill = =math.ceil(speed_print * 55 / 40) -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg index 9e59d29247..eeb7eeb9ad 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_abs_0.8_normal.inst.cfg @@ -17,6 +17,5 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 25 cool_min_speed = 15 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg index 37f5926bce..e6ba07e333 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.25_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 2 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 15 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg index 44f691bcb7..ecc275955a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 10 infill_sparse_density = 20 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg index 1f34fc2e16..04edfcc04e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 15 infill_sparse_density = 20 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg index de4552193a..575f34afa5 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg @@ -19,7 +19,6 @@ cool_min_speed = 10 infill_sparse_density = 20 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg index e22acd895b..3bbfcae59a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg @@ -19,6 +19,5 @@ cool_min_speed = 8 infill_sparse_density = 20 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg index f0fd971697..b423160845 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.8_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 25 cool_min_speed = 8 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 retraction_combing_max_distance = 50 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg index a496c9b024..1b72899389 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg @@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22 raft_airgap = 0.37 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) speed_wall_0 = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg index 67c5c16e65..9ca4dec093 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg @@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22 raft_airgap = 0.37 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 15 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg index 90396b40a7..bdf526c785 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg @@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22 raft_airgap = 0.37 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg index 7df3ca1322..f9348f6118 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg @@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22 raft_airgap = 0.37 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg index 5ad74de77b..a612263cfa 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =round(speed_print * 30 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 20 / 25) speed_wall_0 = =math.ceil(speed_print * 20 / 25) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg index dec0f67c1e..5bf30209fe 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.37 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg index bd76fb2c17..6524490255 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg @@ -21,7 +21,6 @@ infill_sparse_density = 20 layer_0_z_overlap = 0.1 raft_airgap = 0.15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg index 2e3e72b354..2d06b19389 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg @@ -21,7 +21,6 @@ infill_sparse_density = 20 layer_0_z_overlap = 0.1 raft_airgap = 0.15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg index ecababf038..c17d9a62c9 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg @@ -20,7 +20,6 @@ infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.57 retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg index 3bc6cdd0de..edeacb4f46 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg @@ -20,7 +20,6 @@ infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.57 retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg index 5b71703b7f..ce30e7a0c3 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg @@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22 raft_airgap = 0.44 retraction_hop_enabled = 0.2 retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg index f439ac8971..e5b8b1127e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg @@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22 raft_airgap = 0.44 retraction_hop_enabled = 0.2 retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg index 9fc2a85950..fc949cbbaf 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg @@ -20,7 +20,6 @@ infill_sparse_density = 20 layer_0_z_overlap = 0.25 raft_airgap = 0.44 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg index 560acf1335..505aa6e130 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg @@ -20,7 +20,6 @@ infill_sparse_density = 20 layer_0_z_overlap = 0.25 raft_airgap = 0.44 retraction_hop_enabled = 0.2 -speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg index 8366aea6c2..9b99b78ae7 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True support_z_distance = 0.19 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg index 2979294168..806d75813b 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg @@ -21,7 +21,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.2 raft_airgap = 0.25 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 support_enable = True support_z_distance = 0.19 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg index f32a6969ad..c4226d776a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) speed_wall_x = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg index 0e52da4cca..b9f3b55207 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.3 raft_airgap = 0.35 -speed_layer_0 = =round(speed_print * 30 / 45) speed_print = 45 speed_wall_0 = =math.ceil(speed_print * 20 / 45) speed_wall_x = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg index b8c0c431d4..3e9f3d0deb 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg index 7668a9c941..a4d35b8323 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.52 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 20 / 45) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg index c170588b34..8969be2004 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg @@ -20,7 +20,6 @@ infill_overlap = =0 if infill_sparse_density > 80 else 5 infill_sparse_density = 20 layer_0_z_overlap = 0.22 raft_airgap = 0.47 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 support_angle = 45 support_enable = True diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg index 4b85e1e75b..dbdc672498 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 2 cool_min_layer_time_fan_speed_max = 25 cool_min_speed = 15 infill_sparse_density = 20 -speed_layer_0 = 30 speed_print = 30 top_bottom_thickness = 0.72 retraction_combing_max_distance = 8 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg index 993dd399a3..fc7dec4b93 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = 30 speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg index 5a81d83d01..a14e2fa0e9 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = 30 speed_print = 45 speed_travel = 150 speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg index efdd2fe9c4..1daeacf5b1 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = 30 speed_print = 45 speed_wall = =math.ceil(speed_print * 30 / 45) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg index 5950bef661..7598e7bce6 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 5 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 8 infill_sparse_density = 20 -speed_layer_0 = 30 speed_print = 40 top_bottom_thickness = 1.2 retraction_combing_max_distance = 8 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg index 3ccbd02e7f..17badc67ef 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time = 3 cool_min_layer_time_fan_speed_max = 25 cool_min_speed = 8 infill_sparse_density = 20 -speed_layer_0 = 30 speed_print = 40 top_bottom_thickness = 1.2 retraction_combing_max_distance = 8 \ No newline at end of file diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg index 3853f5cce0..bddaf0b110 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.25_normal.inst.cfg @@ -15,6 +15,5 @@ variant = 0.25 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg index 0a1e0638f2..03ae96c36f 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg index c5d6f2344d..8f8f854d8f 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg index ca2d182df1..7080b95b0b 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg index 282aacf303..902eb481e5 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) top_bottom_thickness = 0.8 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg index 590da7909c..e4ea633592 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 55) speed_print = 55 speed_topbottom = =math.ceil(speed_print * 20 / 55) speed_wall = =math.ceil(speed_print * 40 / 55) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg index bd2d1f2fd0..9d2d858c32 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.8_normal.inst.cfg @@ -15,7 +15,6 @@ variant = 0.8 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_wall_0 = =math.ceil(speed_print * 25 / 40) top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg index fc24da0222..37a63d3aa1 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg @@ -13,7 +13,6 @@ variant = 0.4 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg index dde91c441c..f854fd3f1a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg @@ -13,7 +13,6 @@ variant = 0.4 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_min_travel = 0.5 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg index 1b3024f709..bc011fc04e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg @@ -13,7 +13,6 @@ variant = 0.6 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -35,13 +33,11 @@ retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg index 6784ae2adb..25dfb54159 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg @@ -13,7 +13,6 @@ variant = 0.6 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -35,13 +33,11 @@ retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg index b0fbab6934..df8cd3a5a6 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg @@ -13,7 +13,6 @@ variant = 0.8 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg index bb55a80ba8..459244683a 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg @@ -13,7 +13,6 @@ variant = 0.8 mm [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) @@ -22,7 +21,6 @@ acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 20 @@ -36,13 +34,11 @@ retraction_hop_enabled = True retraction_hop_only_when_collides = True retraction_prime_speed = 15 skin_overlap = 10 -speed_layer_0 = =speed_print speed_prime_tower = =speed_topbottom speed_print = 25 speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 250 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 20 / 25) support_angle = 60 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg index ea9cf28d95..20e86a3c3e 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.25_normal.inst.cfg @@ -15,6 +15,5 @@ variant = 0.25 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg index 4015fdbc41..18663a8b66 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg index 9aef437056..09b2f6b210 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 40) speed_travel = 150 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg index d594bc5468..4e61dbc2f5 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 20 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg index cea453207f..6a9a55ff57 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg @@ -16,7 +16,6 @@ cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 retraction_prime_speed = =retraction_speed -speed_layer_0 = =round(speed_print * 30 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 20 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg index 72144e5cfa..4954006e74 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.8_normal.inst.cfg @@ -15,7 +15,6 @@ variant = 0.8 mm cool_min_layer_time = 5 cool_min_speed = 10 infill_sparse_density = 20 -speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 speed_wall_0 = =math.ceil(speed_print * 25 / 40) top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg index c9cc3bb528..e33248cc93 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg @@ -23,7 +23,6 @@ layer_0_z_overlap = 0.1 raft_airgap = 0.2 retraction_count_max = 15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg index 752dcaadd2..8541c3bf97 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg @@ -21,7 +21,6 @@ cool_min_speed = 15 infill_sparse_density = 10 retraction_count_max = 15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 40) speed_print = 40 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg index 4a8a99ce10..0ca418bb82 100644 --- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg @@ -22,7 +22,6 @@ layer_0_z_overlap = 0.12 raft_airgap = 0.24 retraction_count_max = 15 retraction_hop_enabled = 0.2 -speed_layer_0 = =math.ceil(speed_print * 30 / 45) speed_print = 45 speed_support = 40 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 6e23de0aa7..ba388dc90f 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ is_experimental = True [values] adhesion_type = brim brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 @@ -32,7 +31,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg index 770601ed22..063d8acd7c 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] brim_width = 8 -cool_fan_full_at_height = =layer_height_0 cool_min_speed = 10 infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' @@ -24,9 +23,7 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = 190 retraction_hop = 0.2 skin_overlap = 5 -speed_layer_0 = =speed_print speed_print = 30 -speed_travel_layer_0 = 120 speed_wall = =math.ceil(speed_print * 25 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index 6ce295d546..10f6b3ab68 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -24,7 +24,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 15 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -35,10 +34,8 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel = 300 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg index 2efc031ab1..667123dd52 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] brim_width = 8 -cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' @@ -23,10 +22,8 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature - 15 skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_travel_layer_0 = 120 speed_wall = =math.ceil(speed_print * 25 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index aca5d70367..747f2b3567 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index 5678217664..8361839ecb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 prime_tower_enable = False speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index bb2ed82e47..522ae7a37a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -16,11 +16,9 @@ cool_min_speed = 12 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature + 15 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 prime_tower_enable = False speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index ea70e963cb..9ec2372730 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -14,11 +14,9 @@ variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_print_temperature_layer_0 = =material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 prime_tower_enable = False speed_print = 55 -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index c2117937ef..6dcc71dd4a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -21,7 +20,6 @@ material_print_temperature = =default_material_print_temperature + 5 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index fd8f22a3fe..4267cb7eab 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -14,14 +14,12 @@ variant = AA 0.4 [values] support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 # prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_print = 80 -speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index 0723122770..ac99f45ed2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -14,14 +14,12 @@ variant = AA 0.4 [values] support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_brim_enable = True support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 3bbbce3193..2b3acb9b00 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -22,7 +22,6 @@ machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -30,7 +29,6 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index 0963636810..05cc9f63ba 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -22,7 +22,6 @@ machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -30,7 +29,6 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 714de20118..1a7b681d54 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -24,7 +24,6 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -32,7 +31,6 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 293fe24d6b..c44ecbffe4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -31,7 +30,6 @@ retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg index 7f33b0e11c..0cda32b1f5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg @@ -17,7 +17,6 @@ material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 skin_overlap = 20 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg index 98a0b3c5a1..348a7d3510 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg @@ -17,7 +17,6 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg index de3842c18f..a83d597f8d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg @@ -19,6 +19,5 @@ material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg index f9263edaf5..7c1d03f592 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -17,6 +17,5 @@ machine_nozzle_heat_up_speed = 1.5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 55 -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index babf6f1306..af122af470 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index cbf61a838f..74087e7b13 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index 31e1d559f3..6b081c5bd7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index 761ab7d56d..ef63c3afe0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.25 skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 8627ccd4a3..81812e7ea2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] adhesion_type = raft brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 @@ -40,7 +39,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 1119e3e7ac..8a0a874aff 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] adhesion_type = raft brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 @@ -38,7 +37,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 5cfe7b7d62..81707cdc26 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] adhesion_type = raft brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 @@ -40,7 +39,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 8f471a9507..67a45c439f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] adhesion_type = raft brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 @@ -37,7 +36,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg index 3c815ce6bc..df43409808 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg @@ -17,7 +17,6 @@ material_initial_print_temperature = =material_print_temperature material_final_print_temperature = =material_print_temperature - 5 skin_overlap = 20 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg index 4bcf604e87..d7c1434f85 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg @@ -17,7 +17,6 @@ material_print_temperature = =default_material_print_temperature material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg index 3b4676aedf..22d4a931c4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -18,7 +18,6 @@ material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 10 material_final_print_temperature = =material_print_temperature - 15 speed_print = 55 -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) speed_infill = =math.ceil(speed_print * 45 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 94ebaaf3cd..707a7fa097 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -12,14 +12,12 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index 302e1284a0..972963a1a1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -12,13 +12,11 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False speed_print = 80 -speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index e12f054442..458915a78d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -12,7 +12,6 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 machine_nozzle_cool_down_speed = 0.75 @@ -21,7 +20,6 @@ material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False skin_overlap = 10 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 30 / 60) top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index b3579468ae..e22c5ee79e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -12,12 +12,10 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index b0e27707f6..866e75a703 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -29,7 +29,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature + 5 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -41,11 +40,9 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 04fe8cfe38..1a07585f8b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -29,7 +29,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 12 material_initial_print_temperature = =material_print_temperature - 2 material_print_temperature = =default_material_print_temperature - 13 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -40,11 +39,9 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 6f9ee5672b..44ef5cad73 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -28,7 +28,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 15 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -39,11 +38,9 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_travel = 300 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index 8f018c5aa5..8edb6d184b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -12,16 +12,13 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 prime_tower_enable = False skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index 984e51d1bf..1dcd7de37d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 prime_tower_enable = False -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index 29ddedf4a7..226568fc85 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -12,16 +12,13 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 956f955055..a155163995 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -30,7 +30,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -41,7 +40,6 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 592916489d..3adf9b510c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -30,7 +30,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_amount = 7 @@ -42,7 +41,6 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 5d00904dca..e4ec049a25 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -28,7 +28,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 17 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -39,7 +38,6 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_travel = 300 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index c2d9a6d8c9..5af95b2969 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -14,18 +14,14 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 14 * layer_height machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index e48299aba3..ef7eaf4120 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -14,19 +14,15 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 7 * layer_height layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 08181bd2ee..d6bd7b5e23 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -14,20 +14,16 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 9 * layer_height layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index 4480855c43..3f9aa0989c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 14 * layer_height material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index 757c716dad..de4767cdfb 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -14,15 +14,11 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 7 * layer_height layer_height = 0.4 -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index a8e3d3a957..5042e8eed3 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -14,16 +14,12 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 9 * layer_height layer_height = 0.3 material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 3e9965034b..2ae8ebc003 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 137e93d019..712658ed00 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 4afe312ac3..558f365e9f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index ed79b9ab61..cb0d1ca67d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -19,7 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index ad6ecd7a11..7fd42ccdc8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -19,7 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index a146ef9313..c9bf4eee3d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -19,7 +19,6 @@ top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 material_bed_temperature_layer_0 = =material_bed_temperature -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index e05d0df6cb..29ec865027 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 7595124338..15da6a27a0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 13166a25f1..4b874d5e25 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -12,18 +12,15 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 3e7242fea2..6d93e867f2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -24,7 +24,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =material_print_temperature + 19 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 872c811411..f3e59695c8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -25,7 +25,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature +15 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index d0e673c585..c1c2246884 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -24,7 +24,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 17 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index afb105b535..91c3f81eea 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_min_travel = 5 skin_overlap = 50 -speed_layer_0 = 10 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 705b63ad02..1a8fc2da7f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ is_experimental = True [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 @@ -30,7 +29,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index d9ee0e629b..8b42be13b0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -12,7 +12,6 @@ material = generic_petg variant = AA 0.25 [values] -initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 40 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg index 33409c4ef2..0ee56dc531 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] brim_width = 8 -cool_fan_full_at_height = =layer_height_0 cool_min_speed = 10 infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' @@ -24,9 +23,7 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = 190 retraction_hop = 0.2 skin_overlap = 5 -speed_layer_0 = =speed_print speed_print = 30 -speed_travel_layer_0 = 120 speed_wall = =math.ceil(speed_print * 25 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index 74c7370130..449b03bd4b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -24,7 +24,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 15 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -35,9 +34,7 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg index 02c7e10466..151d5a8a74 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] brim_width = 8 -cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' @@ -23,10 +22,8 @@ material_final_print_temperature = =material_print_temperature - 15 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 15 skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_travel_layer_0 = 120 speed_wall = =math.ceil(speed_print * 25 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg index a695827302..2e93a0254a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ prime_tower_enable = False raft_airgap = 0.15 skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = 10 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg index 802e5c9d00..1c59a448ac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) -speed_layer_0 = 10 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg index d83461ee9c..fcf6269d9f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg @@ -21,7 +21,6 @@ material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = 10 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg index bed87d7b95..d112a72d0b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) -speed_layer_0 = 10 speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg index 2c4432db17..7bbb926874 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg @@ -13,14 +13,12 @@ variant = AA 0.4 [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg index 076286fc6b..2d933bcabe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg @@ -13,12 +13,10 @@ variant = AA 0.4 [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 -speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg index 92c8448d77..8b3a0033db 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -13,14 +13,12 @@ variant = AA 0.4 [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg index 3883b17f6c..1780774511 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -14,14 +14,12 @@ is_experimental = True [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index 04df2951fa..562023183d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -20,7 +20,6 @@ machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -30,7 +29,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_wall = =math.ceil(speed_print * 50 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index d90b6c0a04..86a955c24a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -30,7 +29,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index c043bb9bb7..cbd48442e3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -32,7 +31,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_wall = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index 3196fc777f..f70b6b22bf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -32,7 +31,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_wall = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg index 00dad75b09..57ae37e209 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg @@ -20,7 +20,6 @@ retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg index df68316eb1..2becdb2bc2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ material_print_temperature = =default_material_print_temperature + 5 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg index 4850bc393c..4774cea71f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg @@ -22,7 +22,6 @@ material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg index 41594ab90f..e34a9c943d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 9d4069eead..ebbb7eeb68 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index df0aa521c3..1bb66377e8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index fcc766e14a..6f43c2550b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index bd46912a8d..80d4ca4e4a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index c34bf1bfde..fbe76fded3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 @@ -36,7 +35,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 6e115a9c37..1b2b210a85 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 @@ -35,7 +34,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 016a66ea60..7a63a8f58b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 @@ -36,7 +35,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 3cb5249538..11fdc84815 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 @@ -34,7 +33,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg index f40c3d9968..08e059547d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -13,14 +13,12 @@ variant = AA 0.4 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 material_final_print_temperature = =material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 5 retraction_combing_max_distance = 8 skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg index 496e5662ca..81431a2089 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg @@ -14,13 +14,11 @@ variant = AA 0.4 [values] cool_min_speed = 7 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg index f710c0fa58..943b720e4d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_min_speed = 12 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 15 @@ -22,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 10 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg index a3ef8347f1..c16ac3fb99 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 15 @@ -21,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 9e4855a3cc..0df61743ba 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -14,10 +14,8 @@ variant = AA 0.4 [values] acceleration_wall = 2000 acceleration_wall_0 = 2000 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed infill_sparse_density = 15 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 @@ -25,7 +23,6 @@ prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index cd95a1ec89..66311afea4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -12,15 +12,12 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed -speed_layer_0 = 10 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 789bccd411..9dd2c0802a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -12,10 +12,8 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 @@ -23,7 +21,6 @@ prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = 10 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 9ef1ae8e0a..89f1a107b4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -12,15 +12,12 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 11f9e4c3d8..6220b0052a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -17,7 +17,6 @@ acceleration_print = 2000 acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index a26e442819..78b3899c1c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature + 5 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 06cf202bc6..88a38bfc2c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 12 material_initial_print_temperature = =material_print_temperature - 2 material_print_temperature = =default_material_print_temperature - 13 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 61453c278c..511c827b2b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 15 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 758a2ea878..685e41e7d5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -12,17 +12,14 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index ae8efe7a72..beac1f0e68 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -12,15 +12,12 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index 72be73dc22..e019b421f8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -12,17 +12,14 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index 6e6a9216cf..d744f942c8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -12,17 +12,14 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 23feb0619a..bd146c9165 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -17,7 +17,6 @@ acceleration_print = 2000 acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index b461efb73b..82cc41840b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -28,7 +28,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -37,7 +36,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 08fcbc3187..92fc4c3996 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -28,7 +28,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -37,7 +36,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 0be0f52120..efb47d8c4b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -27,7 +27,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 17 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -36,7 +35,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg index 72f064a87f..16464b6394 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -14,19 +14,15 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 14 * layer_height machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 8a2cd3eafd..17bcb153be 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -14,20 +14,16 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 7 * layer_height machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg index fc0520f510..cd22ced2ce 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -14,19 +14,15 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 9 * layer_height machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg index 23c5f9d81e..82db443247 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 14 * layer_height material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index 51568ba5e7..0c697ecde5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 speed_infill = =math.ceil(speed_print * 37 / 50) -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg index e8dcf64d3d..ad163f9b89 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 9 * layer_height material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 9e900c5658..d4a1f6c985 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 cool_fan_speed = 20 -initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index 8b9fa7de7f..127166bd62 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 cool_fan_speed = 20 -initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index 4dbd1099f4..ca5a5b8404 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -14,8 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 cool_fan_speed = 20 -initial_layer_line_width_factor = 100 -layer_height_0 = 0.27 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index abe6fcbecc..58d9c33fa2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index 01d301f178..93125940c5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index be71c1faee..a7cd84fd76 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 2ed16d2428..e49e150000 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -18,7 +18,6 @@ cool_min_speed = 17 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 932e74a409..5c22e8006d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -18,7 +18,6 @@ cool_min_speed = 17 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 19c2b14c99..d8e40f925e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg index 046e1a3f75..5ac1c01482 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 69f24e6ba1..30f1ce88df 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 91f260f523..f1c3e6d442 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -12,18 +12,15 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index a03f52f4c2..cd0492a425 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =material_print_temperature + 19 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index b881b5d3a6..a20bbc6718 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -22,7 +22,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index f8d758abb0..c55b5315cc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -21,7 +21,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 17 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg index e90b9c6d2b..b5e8ebc2a7 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg index 36a0eb09c8..5ed8c2b4bf 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg index 6c380d6295..824ca892e5 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg index faf738c643..cb23ca82c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg index 1173c7339c..8c6763a6b2 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg index 6d5ccf3855..618c5493ee 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg index c91e9a0fff..43669626b0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg index b6d9f5e2a1..f676c14b58 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index a4f923c5fe..9cb4a91bfa 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.4 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index f6a3920608..7207ac1163 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.4 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg index 1e19814d67..b8734796f8 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg index 662f167f69..09dbea2d1c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg index 6975526d71..ed9643e6b3 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg index 986dda1437..ce3543957a 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index 1f8cc8ad71..16306b708c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.6 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 9372890f24..5f73d921cd 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.6 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index abb891489e..65e3cfee97 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -14,7 +14,6 @@ is_experimental = True [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 @@ -30,7 +29,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index 5f7d46dc8b..afd987af02 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -12,7 +12,6 @@ material = generic_petg variant = AA 0.25 [values] -initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 40 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg index 553506a43c..3186bc57f3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PLA_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] brim_width = 8 -cool_fan_full_at_height = =layer_height_0 cool_min_speed = 10 infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' @@ -24,9 +23,7 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = 190 retraction_hop = 0.2 skin_overlap = 5 -speed_layer_0 = =speed_print speed_print = 30 -speed_travel_layer_0 = 120 speed_wall = =math.ceil(speed_print * 25 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index e49dce4989..d01599008b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -24,7 +24,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 15 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -35,9 +34,7 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 15 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index 52f616b1d5..5da606dd84 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 [values] brim_width = 8 -cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' @@ -23,10 +22,8 @@ material_final_print_temperature = =material_print_temperature - 15 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 15 skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) -speed_travel_layer_0 = 120 speed_wall = =math.ceil(speed_print * 25 / 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index 41b2f693fd..c1914f7973 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ prime_tower_enable = False raft_airgap = 0.15 skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = 10 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index a6fc9c5462..5f3542bd1d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) -speed_layer_0 = 10 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 496d17b2e8..ff36c99604 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -21,7 +21,6 @@ material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = 10 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index d7f7be3a31..14f84d5505 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) -speed_layer_0 = 10 speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg index 3271e26dba..c7c5cbc075 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg @@ -13,14 +13,12 @@ variant = AA 0.4 [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg index 0bc81f38c0..5caaca15d8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg @@ -13,12 +13,10 @@ variant = AA 0.4 [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 -speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg index 0324976b7a..2bbaae315b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg @@ -13,14 +13,12 @@ variant = AA 0.4 [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_brim_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg index cfa00238e3..78711f7e95 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -14,14 +14,12 @@ is_experimental = True [values] brim_replaces_support = False -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index c39d1516af..757c495559 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -20,7 +20,6 @@ machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -30,7 +29,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) speed_wall = =math.ceil(speed_print * 50 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index 5d74e6164b..5e438c8704 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ machine_min_cool_heat_time_window = 15 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -30,7 +29,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 45 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index cef6d64e99..6bcd25a9b9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -32,7 +31,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_wall = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 2d33b40631..cc08c9d5d6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =material_print_temperature multiple_mesh_overlap = 0 prime_tower_enable = True prime_tower_wipe_enabled = True @@ -32,7 +31,6 @@ retraction_hop_enabled = False retraction_hop_only_when_collides = True retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) speed_wall = =math.ceil(speed_print * 35 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 6b1f8504d2..b1f0be1594 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -20,7 +20,6 @@ retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg index de3910f816..e34aa7fd24 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg @@ -20,7 +20,6 @@ material_print_temperature = =default_material_print_temperature + 5 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg index 546af06919..270b03521a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg @@ -22,7 +22,6 @@ material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg index 2614b40d60..f7f7979188 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index e4d6d270ee..76a2cc1550 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 8b77d7010f..bd78a8e8c1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -21,7 +21,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 72c3e257d1..c2a7194a2f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index e3fbfc5b6e..b51a5c98e3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -20,7 +20,6 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed skin_overlap = 50 -speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index d2926843a6..be3b5b2e92 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 @@ -36,7 +35,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 739e168d62..c8c5846857 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 @@ -35,7 +34,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index e574b8cca5..abae8129a3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 @@ -36,7 +35,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 4103986e65..b1ecd60f3f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] brim_width = 20 -cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 @@ -34,7 +33,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 skin_overlap = 30 -speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index 62d24807b6..f1e55234df 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -13,14 +13,12 @@ variant = AA 0.4 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 material_final_print_temperature = =material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 5 retraction_combing_max_distance = 8 skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg index d5a87efce1..bdb4e78d6a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg @@ -14,13 +14,11 @@ variant = AA 0.4 [values] cool_min_speed = 7 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg index 49978a1b46..58ddfca383 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_min_speed = 12 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 15 @@ -22,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 10 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg index 6e4a6907de..5a9addabb1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.4 [values] infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 15 @@ -21,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index bda40276c4..c90d22e44c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -14,10 +14,8 @@ variant = AA 0.4 [values] acceleration_wall = 2000 acceleration_wall_0 = 2000 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed infill_sparse_density = 15 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 @@ -25,7 +23,6 @@ prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index b58cabc738..0fe89909db 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -12,15 +12,12 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed -speed_layer_0 = 10 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 5a7f57ac29..47abbdcfd4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -12,10 +12,8 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 @@ -23,7 +21,6 @@ prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = 10 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 7d6815f135..2f73079408 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -12,15 +12,12 @@ material = generic_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index 09838eb4d1..563abd29d5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -17,7 +17,6 @@ acceleration_print = 2000 acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index ebb514af89..7996fd227f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature + 5 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index 0abc43467b..f89ce709f2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 12 material_initial_print_temperature = =material_print_temperature - 2 material_print_temperature = =default_material_print_temperature - 13 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index bd8ab98e55..86884258ef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 15 -material_print_temperature_layer_0 = =material_print_temperature + 3 multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 @@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index b80243211d..b4de80af0c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -12,17 +12,14 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) speed_topbottom = =math.ceil(speed_print * 25 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index 57a4f3349e..46fc3ed093 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -12,15 +12,12 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 10 prime_tower_enable = False retraction_prime_speed = =retraction_speed -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index bf8686d358..b3874c5d54 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -12,17 +12,14 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index dd469f9403..a3c314db6f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -12,17 +12,14 @@ material = generic_tough_pla variant = AA 0.4 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index ef60c4fcd3..9075aa0083 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -17,7 +17,6 @@ acceleration_print = 2000 acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 19324e1777..18962e1e2b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -28,7 +28,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -37,7 +36,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 86c8817c5d..6481d0e513 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -28,7 +28,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -37,7 +36,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 42ad6c4cd2..f842089f21 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -27,7 +27,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature material_flow = 106 material_initial_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 17 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True retraction_count_max = 15 @@ -36,7 +35,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 -speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index eef401ff61..9f7101546f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -14,19 +14,15 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 14 * layer_height machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index de96694d69..c342e4d2f7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -14,20 +14,16 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 7 * layer_height machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 529c39889b..cf0b8da5b7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -14,19 +14,15 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 9 * layer_height machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = True retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index a6250760c6..3951bb8ccc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 14 * layer_height material_print_temperature = =default_material_print_temperature - 5 -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 8045ab8f90..9baadb9951 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 speed_infill = =math.ceil(speed_print * 37 / 50) -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index 6fe4bd5999..24489bdfcf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] brim_width = 14 -cool_fan_full_at_height = =layer_height_0 + 9 * layer_height material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 -speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 47a26097f5..c9dc99154d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 cool_fan_speed = 20 -initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index f13991359d..67bbef5ac0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 cool_fan_speed = 20 -initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 41e42809cf..e25a61b38a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.8 [values] brim_width = 7 cool_fan_speed = 20 -initial_layer_line_width_factor = 100 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index 3883c1dc8a..25ddb22822 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 7033e11eed..a56e09f355 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index 35f435f693..455796d4a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 4c262310e8..e188e6ea07 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -18,7 +18,6 @@ cool_min_speed = 17 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 539e6335c7..deeac6ebaf 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -18,7 +18,6 @@ cool_min_speed = 17 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 9c3cb44e07..4187507299 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature -material_print_temperature_layer_0 = =default_material_print_temperature + 2 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index 1ccf9c78a4..258e00a7f2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index 31f82a54e2..8910082407 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index e8648e68d4..fd4c6ecb35 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -12,18 +12,15 @@ material = generic_tough_pla variant = AA 0.8 [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =material_print_temperature - 15 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 5 -material_print_temperature_layer_0 = =material_print_temperature prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index 57dc15f243..c1f1d01180 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -21,7 +21,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature - 2 -material_print_temperature_layer_0 = =material_print_temperature + 19 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 1d8cf0809c..36ab5dccf6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -22,7 +22,6 @@ material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 2 -material_print_temperature_layer_0 = =material_print_temperature + 15 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 95e5da677d..24bfc609d6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -21,7 +21,6 @@ machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 17 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg index c0e20f1584..7e3c2f6c6a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg index 8b3030ce09..935c04f958 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg index 0307bbff4a..5f68f86740 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg index ac6883ca44..f7328a406a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg index c44b25bd94..92b3953ea4 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg index a79662a65d..4ebdf0635c 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg index ee1ac1ef7a..ddf9ba9c4a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg index c0a4cb9a4a..9e61b75636 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index a3a407f35c..80da69140f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.4 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index 367024b978..8f30298b41 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.4 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg index 02430694b3..f4212047a6 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg index ab1c73641e..f379d2ff2d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg index e4019fea55..9721433039 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg index 2d45c63fcf..067d0146fb 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 8d2cbfc60f..af6b17cb41 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.6 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index 7395613486..573d84dd2d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -13,7 +13,6 @@ variant = CC 0.6 is_experimental = True [values] -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg index 15fc789f66..afb0a0fb57 100644 --- a/resources/variants/ultimaker3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_aa0.25.inst.cfg @@ -10,7 +10,6 @@ hardware_type = nozzle [values] brim_width = 7 -layer_height_0 = 0.17 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -21,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5 retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 -speed_layer_0 = 20 speed_print = 55 speed_topbottom = 20 speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 4adec1540b..9bb21dd803 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -36,7 +36,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_overlap = 5 -speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index fd516c48b2..1a9007b64f 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -37,7 +37,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 3 retraction_prime_speed = 15 skin_overlap = 5 -speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 7 / 35) speed_print = 35 speed_support = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 05e91d0752..49bdf2d26e 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -18,7 +18,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_min_travel = =3 * line_width -speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg index e6a9abfe1e..9f649b0052 100644 --- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg @@ -10,7 +10,6 @@ hardware_type = nozzle [values] brim_width = 7 -layer_height_0 = 0.17 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -21,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5 retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 -speed_layer_0 = 20 speed_print = 55 speed_topbottom = 20 speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index a215c4f455..122df77e82 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -36,7 +36,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_overlap = 5 -speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index e052df63eb..877ee0772b 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -37,7 +37,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 3 retraction_prime_speed = 15 skin_overlap = 5 -speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 7 / 35) speed_print = 35 speed_support = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index 69968e721e..d97b3c9f32 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -18,7 +18,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_min_travel = =3 * line_width -speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg index 059f3ece2f..454638f302 100644 --- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg @@ -10,7 +10,6 @@ hardware_type = nozzle [values] brim_width = 7 -layer_height_0 = 0.17 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -21,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5 retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 -speed_layer_0 = 20 speed_print = 55 speed_topbottom = 20 speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 6e477f15e6..322ddc2601 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -37,7 +37,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_speed = 25 skin_overlap = 5 -speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 0305245e08..c2e84c5764 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -35,7 +35,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 3 skin_overlap = 5 -speed_layer_0 = 20 speed_print = 35 speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index 9c18713818..19e7778e17 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -18,7 +18,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_min_travel = =3 * line_width -speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg index 0c22958955..f2294cac7b 100644 --- a/resources/variants/ultimaker_s3_cc04.inst.cfg +++ b/resources/variants/ultimaker_s3_cc04.inst.cfg @@ -16,11 +16,9 @@ machine_nozzle_size = 0.4 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 45 speed_support = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 45) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 30 / 45) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) speed_wall_x = =speed_wall diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg index caa1616d4d..1819758dbb 100644 --- a/resources/variants/ultimaker_s3_cc06.inst.cfg +++ b/resources/variants/ultimaker_s3_cc06.inst.cfg @@ -16,11 +16,9 @@ machine_nozzle_size = 0.6 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 45 speed_support = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 45) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 30 / 45) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) speed_wall_x = =speed_wall diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg index 3b9d08b278..4a7851e05f 100644 --- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg @@ -10,7 +10,6 @@ hardware_type = nozzle [values] brim_width = 7 -layer_height_0 = 0.17 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 @@ -21,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5 retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed skin_overlap = 15 -speed_layer_0 = 20 speed_print = 55 speed_topbottom = 20 speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index 4433739430..9907fcbbca 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -37,7 +37,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_speed = 25 skin_overlap = 5 -speed_layer_0 = 20 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 3c2e9d14cb..4d9a75bdf4 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -35,7 +35,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 3 skin_overlap = 5 -speed_layer_0 = 20 speed_print = 35 speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg index 6e378bbb82..7234041751 100644 --- a/resources/variants/ultimaker_s5_bb04.inst.cfg +++ b/resources/variants/ultimaker_s5_bb04.inst.cfg @@ -18,7 +18,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_min_travel = =3 * line_width -speed_layer_0 = 20 speed_prime_tower = =math.ceil(speed_print * 10 / 35) speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg index 174a4f7c62..aca6187fa8 100644 --- a/resources/variants/ultimaker_s5_cc04.inst.cfg +++ b/resources/variants/ultimaker_s5_cc04.inst.cfg @@ -16,11 +16,9 @@ machine_nozzle_size = 0.4 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 45 speed_support = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 45) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 30 / 45) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) speed_wall_x = =speed_wall diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg index e8934377a1..dcbdba18fe 100644 --- a/resources/variants/ultimaker_s5_cc06.inst.cfg +++ b/resources/variants/ultimaker_s5_cc06.inst.cfg @@ -16,11 +16,9 @@ machine_nozzle_size = 0.6 retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print -speed_layer_0 = 20 speed_print = 45 speed_support = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 45) -speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 30 / 45) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) speed_wall_x = =speed_wall