GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-08-14 23:35:53 +08:00
Code Issues Packages Projects Releases Wiki Activity

Add intent profiles for Method High Speed

Browse Source 
These intent modes were tuned by Eric MacNeil.  The jerk &
accel values will be converted into a accel_config by the
Makerbot writer plugin, and the Method firmware will interpret
these values for each path.

The self support speed settings were unchanged from the previous
defaults, but the model speed was increased for ABSR, PLA & TPLA.

PP-544
This commit is contained in:
Alan Bjorklund 2025-01-14 18:04:03 -05:00
parent 75cf32c58b
commit 2ab0482fb4
49 changed files with 1967 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

238
resources/definitions/ultimaker_method_base.def.json
View File

@ -33,12 +33,14 @@
{
"acceleration_enabled":
{
"enabled": false,
"enabled": true,
"value": true
},
"acceleration_infill":
{
"enabled": false,
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_print"
},
"acceleration_layer_0":
@ -48,12 +50,18 @@
},
"acceleration_prime_tower":
{
"enabled": false,
"enabled": "acceleration_enabled and prime_tower_enable and extruders_enabled_count > 1",
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_print"
},
"acceleration_print":
{
"enabled": false,
"enabled": "acceleration_enabled",
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": 800
},
"acceleration_print_layer_0":
@ -63,33 +71,49 @@
},
"acceleration_roofing":
{
"enabled": false,
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_print"
},
"acceleration_skirt_brim":
{
"enabled": "acceleration_enabled and (adhesion_type == 'skirt' or adhesion_type == 'brim')",
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": 800
},
"acceleration_support":
{
"enabled": false,
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_print"
},
"acceleration_support_bottom":
{
"enabled": false,
"value": "acceleration_print"
"value": "acceleration_support_interface"
},
"acceleration_support_infill":
{
"enabled": false,
"value": "acceleration_print"
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_support"
},
"acceleration_support_interface":
{
"enabled": false,
"value": "acceleration_print"
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_support"
},
"acceleration_support_roof":
{
"enabled": false,
"value": "acceleration_print"
"value": "acceleration_support_interface"
},
"acceleration_topbottom":
{
@ -98,7 +122,10 @@
},
"acceleration_travel":
{
"enabled": false,
"enabled": "acceleration_enabled",
"maximum_value": 5000,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": 5000
},
"acceleration_travel_enabled":
@ -113,28 +140,37 @@
},
"acceleration_wall":
{
"enabled": false,
"enabled": "acceleration_enabled",
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_print"
},
"acceleration_wall_0":
{
"enabled": false,
"value": "acceleration_print"
"enabled": "acceleration_enabled",
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_wall"
},
"acceleration_wall_0_roofing":
{
"enabled": false,
"value": "acceleration_print"
"value": "acceleration_wall"
},
"acceleration_wall_x":
{
"enabled": false,
"value": "acceleration_print"
"enabled": "acceleration_enabled",
"maximum_value": 3500,
"minimum_value": 200,
"minimum_value_warning": 750,
"value": "acceleration_wall"
},
"acceleration_wall_x_roofing":
{
"enabled": false,
"value": "acceleration_print"
"value": "acceleration_wall"
},
"adhesion_extruder_nr":
{
@ -203,12 +239,15 @@
"inset_direction": { "value": "'inside_out'" },
"jerk_enabled":
{
"enabled": false,
"enabled": true,
"value": true
},
"jerk_infill":
{
"enabled": false,
"enabled": "jerk_enabled",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_print"
},
"jerk_layer_0":
@ -218,13 +257,19 @@
},
"jerk_prime_tower":
{
"enabled": false,
"enabled": "jerk_enabled and prime_tower_enable and extruders_enabled_count > 1",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_print"
},
"jerk_print":
{
"enabled": false,
"value": 6.25
"enabled": "jerk_enabled",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": 12.5
},
"jerk_print_layer_0":
{
@ -233,33 +278,50 @@
},
"jerk_roofing":
{
"enabled": false,
"enabled": "jerk_enabled",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_print"
},
"jerk_skirt_brim":
{
"enabled": "jerk_enabled and (adhesion_type == 'brim' or adhesion_type == 'skirt')",
"value": 12.5
},
"jerk_support":
{
"enabled": false,
"enabled": "jerk_enabled and support_enable",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_print"
},
"jerk_support_bottom":
{
"enabled": false,
"value": "jerk_print"
"value": "jerk_support_interface"
},
"jerk_support_infill":
{
"enabled": false,
"value": "jerk_print"
"enabled": "jerk_enabled and support_enable",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_support"
},
"jerk_support_interface":
{
"enabled": false,
"value": "jerk_print"
"enabled": "jerk_enabled and support_enable",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_support"
},
"jerk_support_roof":
{
"enabled": false,
"value": "jerk_print"
"value": "jerk_support_interface"
},
"jerk_topbottom":
{
@ -268,8 +330,11 @@
},
"jerk_travel":
{
"enabled": false,
"value": "jerk_print"
"enabled": "jerk_enabled",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": 12.5
},
"jerk_travel_enabled":
{
@ -283,12 +348,18 @@
},
"jerk_wall":
{
"enabled": false,
"enabled": "jerk_enabled",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_print"
},
"jerk_wall_0":
{
"enabled": false,
"enabled": "jerk_enabled",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_print"
},
"jerk_wall_0_roofing":
@ -298,7 +369,10 @@
},
"jerk_wall_x":
{
"enabled": false,
"enabled": "jerk_enabled",
"maximum_value": 35,
"minimum_value": 5,
"minimum_value_warning": 12,
"value": "jerk_print"
},
"jerk_wall_x_roofing":
@ -517,16 +591,86 @@
"skirt_height": { "value": 3 },
"small_skin_width": { "value": 4 },
"speed_equalize_flow_width_factor": { "value": 0 },
"speed_prime_tower": { "value": "speed_topbottom" },
"speed_print": { "value": 50 },
"speed_roofing": { "value": "speed_wall_0" },
"speed_support": { "value": "speed_wall" },
"speed_support_interface": { "value": "speed_topbottom" },
"speed_topbottom": { "value": "speed_wall" },
"speed_infill":
{
"maximum_value": 350,
"maximum_value_warning": 325
},
"speed_prime_tower":
{
"maximum_value": 250,
"maximum_value_warning": 200,
"value": "speed_topbottom"
},
"speed_print":
{
"maximum_value": 350,
"maximum_value_warning": 325,
"value": 50
},
"speed_roofing":
{
"maximum_value": 300,
"maximum_value_warning": 275,
"value": "speed_wall_0"
},
"speed_support":
{
"maximum_value": 350,
"maximum_value_warning": 325,
"value": "speed_wall"
},
"speed_support_infill":
{
"maximum_value": 350,
"maximum_value_warning": 325
},
"speed_support_interface":
{
"maximum_value": 260,
"maximum_value_warning": 255,
"value": "speed_topbottom"
},
"speed_support_roof":
{
"maximum_value": 260,
"maximum_value_warning": 255
},
"speed_topbottom":
{
"maximum_value": 260,
"maximum_value_warning": 255,
"value": "speed_wall"
},
"speed_travel": { "value": 250 },
"speed_wall": { "value": "speed_print * 40/50" },
"speed_wall_0": { "value": "speed_wall * 30/40" },
"speed_wall_x": { "value": "speed_wall" },
"speed_wall":
{
"maximum_value": 260,
"maximum_value_warning": 255,
"value": "speed_print * 40/50"
},
"speed_wall_0":
{
"maximum_value": 260,
"maximum_value_warning": 255,
"value": "speed_wall * 30/40"
},
"speed_wall_0_roofing":
{
"maximum_value": 260,
"maximum_value_warning": 255
},
"speed_wall_x":
{
"maximum_value": 260,
"maximum_value_warning": 255,
"value": "speed_wall"
},
"speed_wall_x_roofing":
{
"maximum_value": 260,
"maximum_value_warning": 255
},
"support_angle": { "value": 40 },
"support_bottom_height": { "value": "2*support_infill_sparse_thickness" },
"support_bottom_line_width":

34
resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_method
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_method
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_method
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_method
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_method
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_method
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_method
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_method
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_method
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_method
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_method
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_method
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

32
resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,32 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_pattern = zigzag
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag

38
resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,38 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

32
resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,32 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1XA
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_pattern = zigzag
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag

38
resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,38 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1XA
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

32
resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,32 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_pattern = zigzag
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag

38
resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,38 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodx
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

41
resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,41 @@
[general]
definition = ultimaker_methodx
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 47
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

42
resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,42 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 45
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
material_bed_temperature = 45
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

42
resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,42 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1A
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 45
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
material_bed_temperature = 45
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

32
resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,32 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_pattern = zigzag
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag

38
resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,38 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

42
resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,42 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 45
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
material_bed_temperature = 45
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

42
resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,42 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = 1C
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 45
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
material_bed_temperature = 45
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

32
resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,32 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1XA
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_pattern = zigzag
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag

38
resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,38 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = 1XA
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

32
resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,32 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_pattern = zigzag
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag

38
resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,38 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_absr_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
cool_min_temperature = 245.0
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
speed_layer_0 = 55
speed_print = 300
speed_support = 100
speed_support_interface = 75
speed_travel = 500
speed_travel_layer_0 = 250
speed_wall_0 = 40
support_pattern = zigzag
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

42
resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,42 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 45
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
material_bed_temperature = 45
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness

34
resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg Normal file
View File

@ -0,0 +1,34 @@
[general]
definition = ultimaker_methodxl
name = High Speed
version = 4
[metadata]
intent_category = highspeed
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bridge_wall_speed = 300
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_pattern = zigzag
jerk_print = 35
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42

42
resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg Normal file
View File

@ -0,0 +1,42 @@
[general]
definition = ultimaker_methodxl
name = High Speed Solid
version = 4
[metadata]
intent_category = highspeedsolid
is_experimental = True
material = ultimaker_tough_pla_175
quality_type = draft
setting_version = 24
type = intent
variant = LABS
[values]
acceleration_print = 3500
bottom_thickness = =top_bottom_thickness
bridge_wall_speed = 300
build_volume_temperature = 45
cool_fan_enabled = True
cool_fan_speed = 100
cool_min_layer_time = 3
infill_angles = [45,135]
infill_material_flow = 97
infill_pattern = zigzag
infill_sparse_density = 99
jerk_print = 35
material_bed_temperature = 45
speed_infill = 240.0
speed_layer_0 = 55
speed_print = 300
speed_travel = 500
speed_travel_layer_0 = 350.0
speed_wall_0 = 45
support_interface_line_width = 0.42
support_line_width = 0.47
support_material_flow = 100
support_pattern = zigzag
support_roof_line_width = 0.42
top_bottom_thickness = =layer_height * 2
top_thickness = =top_bottom_thickness