diff --git a/resources/definitions/abax_pri3.def.json b/resources/definitions/abax_pri3.def.json
index af37c24edd..05469e3da7 100644
--- a/resources/definitions/abax_pri3.def.json
+++ b/resources/definitions/abax_pri3.def.json
@@ -1,90 +1,86 @@
 {
-  "id": "PRi3",
-  "name": "ABAX PRi3",
-  "version": 2,
-  "inherits": "fdmprinter",
-  "metadata": {
-    "visible": true,
-    "author": "ABAX 3d Technologies",
-    "manufacturer": "ABAX 3d Technologies",
-    "category": "3D Printer",
-    "file_formats": "text/x-gcode",
-    "platform": "bq_hephestos_platform.stl",
-    "platform_offset": [
-      0,
-      -82,
-      0
-    ]
-  },
-  "overrides": {
-    "machine_start_gcode": {
-      "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+    "id": "PRi3",
+    "name": "ABAX PRi3",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "bq_hephestos_platform.stl",
+        "platform_offset": [0, -82, 0]
     },
-    "machine_end_gcode": {
-      "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
-    },
-    "machine_width": {
-      "default_value": 225
-    },
-    "machine_depth": {
-      "default_value": 220
-    },
-    "machine_height": {
-      "default_value": 200
-    },
-    "machine_heated_bed": {
-      "default_value": false
-    },
-    "machine_center_is_zero": {
-      "default_value": false
-    },
-    "machine_gcode_flavor": {
-      "default_value": "RepRap"
-    },
-    "layer_height": {
-      "default_value": 0.2
-    },
-    "layer_height_0": {
-      "default_value": 0.2
-    },
-    "wall_thickness": {
-      "default_value": 1
-    },
-    "top_bottom_thickness": {
-      "default_value": 1
-    },
-    "bottom_thickness": {
-      "default_value": 1
-    },
-    "material_print_temperature": {
-      "default_value": 200
-    },
-    "material_bed_temperature": {
-      "default_value": 0
-    },
-    "material_diameter": {
-      "default_value": 1.75
-    },
-    "speed_print": {
-      "default_value": 40
-    },
-    "speed_infill": {
-      "default_value": 70
-    },
-    "speed_wall": {
-      "default_value": 25
-    },
-    "speed_topbottom": {
-      "default_value": 15
-    },
-    "speed_travel": {
-      "default_value": 150
-    },
-    "speed_layer_0": {
-      "default_value": 30
-    },
-    "support_enable": {
-      "default_value": true
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 225
+        },
+        "machine_depth": {
+            "default_value": 220
+        },
+        "machine_height": {
+            "default_value": 200
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
     }
-  }
-}
\ No newline at end of file
+}
diff --git a/resources/definitions/abax_pri5.def.json b/resources/definitions/abax_pri5.def.json
index 9f2009f75c..8300eb7858 100644
--- a/resources/definitions/abax_pri5.def.json
+++ b/resources/definitions/abax_pri5.def.json
@@ -1,90 +1,86 @@
 {
-  "id": "PRi5",
-  "name": "ABAX PRi5",
-  "version": 2,
-  "inherits": "fdmprinter",
-  "metadata": {
-    "visible": true,
-    "author": "ABAX 3d Technologies",
-    "manufacturer": "ABAX 3d Technologies",
-    "category": "3D Printer",
-    "file_formats": "text/x-gcode",
-    "platform": "bq_hephestos_platform.stl",
-    "platform_offset": [
-      0,
-      -82,
-      0
-    ]
-  },
-  "overrides": {
-    "machine_start_gcode": {
-      "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+    "id": "PRi5",
+    "name": "ABAX PRi5",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "bq_hephestos_platform.stl",
+        "platform_offset": [0, -82, 0]
     },
-    "machine_end_gcode": {
-      "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
-    },
-    "machine_width": {
-      "default_value": 310
-    },
-    "machine_depth": {
-      "default_value": 310
-    },
-    "machine_height": {
-      "default_value": 300
-    },
-    "machine_heated_bed": {
-      "default_value": false
-    },
-    "machine_center_is_zero": {
-      "default_value": false
-    },
-    "machine_gcode_flavor": {
-      "default_value": "RepRap"
-    },
-    "layer_height": {
-      "default_value": 0.2
-    },
-    "layer_height_0": {
-      "default_value": 0.2
-    },
-    "wall_thickness": {
-      "default_value": 1
-    },
-    "top_bottom_thickness": {
-      "default_value": 1
-    },
-    "bottom_thickness": {
-      "default_value": 1
-    },
-    "material_print_temperature": {
-      "default_value": 200
-    },
-    "material_bed_temperature": {
-      "default_value": 0
-    },
-    "material_diameter": {
-      "default_value": 1.75
-    },
-    "speed_print": {
-      "default_value": 40
-    },
-    "speed_infill": {
-      "default_value": 70
-    },
-    "speed_wall": {
-      "default_value": 25
-    },
-    "speed_topbottom": {
-      "default_value": 15
-    },
-    "speed_travel": {
-      "default_value": 150
-    },
-    "speed_layer_0": {
-      "default_value": 30
-    },
-    "support_enable": {
-      "default_value": true
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 310
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_height": {
+            "default_value": 300
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
     }
-  }
-}
\ No newline at end of file
+}
diff --git a/resources/definitions/abax_titan.def.json b/resources/definitions/abax_titan.def.json
index d1ac92139e..2ce2874563 100644
--- a/resources/definitions/abax_titan.def.json
+++ b/resources/definitions/abax_titan.def.json
@@ -1,90 +1,86 @@
 {
-  "id": "Titan",
-  "name": "ABAX Titan",
-  "version": 2,
-  "inherits": "fdmprinter",
-  "metadata": {
-    "visible": true,
-    "author": "ABAX 3d Technologies",
-    "manufacturer": "ABAX 3d Technologies",
-    "category": "3D Printer",
-    "file_formats": "text/x-gcode",
-    "platform": "bq_hephestos_platform.stl",
-    "platform_offset": [
-      0,
-      -82,
-      0
-    ]
-  },
-  "overrides": {
-    "machine_start_gcode": {
-      "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+    "id": "Titan",
+    "name": "ABAX Titan",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "bq_hephestos_platform.stl",
+        "platform_offset": [0, -82, 0]
     },
-    "machine_end_gcode": {
-      "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
-    },
-    "machine_width": {
-      "default_value": 310
-    },
-    "machine_depth": {
-      "default_value": 310
-    },
-    "machine_height": {
-      "default_value": 300
-    },
-    "machine_heated_bed": {
-      "default_value": false
-    },
-    "machine_center_is_zero": {
-      "default_value": false
-    },
-    "machine_gcode_flavor": {
-      "default_value": "RepRap"
-    },
-    "layer_height": {
-      "default_value": 0.2
-    },
-    "layer_height_0": {
-      "default_value": 0.2
-    },
-    "wall_thickness": {
-      "default_value": 1
-    },
-    "top_bottom_thickness": {
-      "default_value": 1
-    },
-    "bottom_thickness": {
-      "default_value": 1
-    },
-    "material_print_temperature": {
-      "default_value": 200
-    },
-    "material_bed_temperature": {
-      "default_value": 0
-    },
-    "material_diameter": {
-      "default_value": 1.75
-    },
-    "speed_print": {
-      "default_value": 40
-    },
-    "speed_infill": {
-      "default_value": 70
-    },
-    "speed_wall": {
-      "default_value": 25
-    },
-    "speed_topbottom": {
-      "default_value": 15
-    },
-    "speed_travel": {
-      "default_value": 150
-    },
-    "speed_layer_0": {
-      "default_value": 30
-    },
-    "support_enable": {
-      "default_value": true
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 310
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_height": {
+            "default_value": 300
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
     }
-  }
-}
\ No newline at end of file
+}