diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index 1669dd5e00..dae64cea6b 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -106,6 +106,7 @@
         "retraction_combing_max_distance": { "value": 15 },
         "retraction_count_max": { "value": 25 },
         "retraction_extrusion_window": { "value": 1 },
+        "retraction_min_travel": { "value": 5 },
         "roofing_layer_count": { "value": "1" },
         "roofing_material_flow": { "value": "material_flow" },
         "skin_angles": { "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" },
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index 19df92c08d..17a4b6045e 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -156,7 +156,6 @@
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
         "retraction_hop_only_when_collides": { "value": "True" },
-        "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "skin_overlap": { "value": "10" },
         "speed_prime_tower": { "value": "speed_topbottom" },
diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json
index f0808c529e..6e40f0bbf1 100644
--- a/resources/definitions/ultimaker_method_base.def.json
+++ b/resources/definitions/ultimaker_method_base.def.json
@@ -373,7 +373,6 @@
         "retraction_hop": { "value": 0.4 },
         "retraction_hop_enabled": { "value": true },
         "retraction_hop_only_when_collides": { "value": false },
-        "retraction_min_travel": { "value": "line_width * 4" },
         "retraction_prime_speed": { "value": "retraction_speed" },
         "retraction_speed": { "value": 5 },
         "roofing_layer_count": { "value": 2 },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index add1782368..483825df5a 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -108,7 +108,6 @@
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
         "retraction_hop_only_when_collides": { "value": "True" },
-        "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "retraction_speed": { "value": "45" },
         "speed_prime_tower": { "value": "speed_topbottom" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index ec82e6b630..cd48c4fd38 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -110,7 +110,6 @@
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
         "retraction_hop_only_when_collides": { "value": "True" },
-        "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "retraction_speed": { "value": "45" },
         "speed_prime_tower": { "value": "speed_topbottom" },
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg
index c6d99b63b5..e0d3aa4d50 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 20
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_min_travel = 5
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg
index ec86494397..369cbcd563 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg
index 77082932a5..6485844da8 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg
@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 retraction_prime_speed = 15
 speed_print = 25
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg
index f46f816cfb..c9eebee8a0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg
@@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg
index 2c23449373..bcd04f4b24 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg
index e0899c8dc2..278e502231 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg
@@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg
index 329bd095d5..1baf43933c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg
index eee8fc31b6..3b106196f2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg
@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg
index fa87825718..455338a901 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg
@@ -29,7 +29,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg
index 6c90ec685f..b1f5e1f19a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg
@@ -29,7 +29,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
index 15018203e9..601886a065 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg
@@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
index 1b9912c1d6..bb303eeb33 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg
@@ -29,7 +29,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
index 971cee7b3a..85c37d439d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg
@@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
index 163f32a36d..7619fcf43d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg
@@ -24,7 +24,6 @@ prime_tower_min_volume = 10
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 switch_extruder_prime_speed = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
index 3f75c3366e..b157ed198c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg
@@ -24,7 +24,6 @@ prime_tower_min_volume = 15
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 switch_extruder_prime_speed = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
index b2c5dab3c4..550a26c7f8 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg
@@ -24,7 +24,6 @@ prime_tower_min_volume = 20
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_infill = =math.ceil(speed_wall * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
index 75949f45aa..5d6ce58f7c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg
@@ -27,7 +27,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 25 / 30)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
index 034bda5d09..1b69ada75d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg
@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 23 / 30)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
index e7189d5467..d678d7e178 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg
@@ -27,7 +27,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_infill = =speed_print
 speed_print = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg
index 38267fcf24..ea86a9a9a6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg
@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 20
 ooze_shield_angle = 40
 raft_airgap = 0.4
-retraction_min_travel = 5
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg
index 5779142162..eef6e66a5e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg
index 64b1be79aa..56689c4bfa 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg
@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 retraction_prime_speed = 15
 speed_print = 25
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg
index 0b471a8c75..c58107dcf9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg
@@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg
index 6c9710e436..b210b894e5 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg
index 945b77e699..aa17d35a97 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg
@@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg
index b523e3c646..616443b129 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg
index 85e892628d..8eb0d257d6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg
@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg
index 531f946ba8..bd4dd317bb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg
@@ -29,7 +29,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg
index a7f63a76b1..1e5ea9efb6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg
@@ -29,7 +29,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = 0.8
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
 speed_wall = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
index 0b69ae0c43..db01865cf8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg
@@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
index 29aa42a436..27a8bb863b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg
@@ -29,7 +29,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
index 48e6ffb81b..cf3069ee0f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg
@@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 0.8)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
index 149104700e..c338c4b7ff 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg
@@ -24,7 +24,6 @@ prime_tower_min_volume = 10
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 switch_extruder_prime_speed = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
index 670ec78d51..62d9eb235d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg
@@ -24,7 +24,6 @@ prime_tower_min_volume = 15
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 switch_extruder_prime_speed = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
index c9b5c26d64..b2792b6fee 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg
@@ -24,7 +24,6 @@ prime_tower_min_volume = 20
 retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
-retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_infill = =math.ceil(speed_wall * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
index 43436cd4c7..2491d0ed88 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg
@@ -27,7 +27,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 25 / 30)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
index 58b524dd2a..e975175ce0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg
@@ -28,7 +28,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 23 / 30)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
index d17ec5486a..5334fac1f0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg
@@ -27,7 +27,6 @@ retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
-retraction_min_travel = =line_width * 2
 speed_infill = =speed_print
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
index 1f3baa432f..97b303035c 100644
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_topbottom = 20
diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
index c30365897b..e7d3487503 100644
--- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
@@ -29,7 +29,6 @@ raft_surface_layers = 1
 retraction_amount = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 retraction_speed = 25
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)
diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg
index b3f76758f4..76992b5805 100644
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@@ -14,7 +14,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 retraction_amount = 6.5
-retraction_min_travel = =line_width * 2
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 34e1b6d308..d0f78ac3bd 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 3
 speed_prime_tower = =math.ceil(speed_print * 7 / 35)
 speed_print = 35
 speed_support = =math.ceil(speed_print * 25 / 35)
diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg
index e50241aa3a..4e232cbb5e 100644
--- a/resources/variants/ultimaker_s3_bb04.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb04.inst.cfg
@@ -16,7 +16,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-retraction_min_travel = =3 * line_width
 speed_prime_tower = =math.ceil(speed_print * 10 / 35)
 speed_support = =math.ceil(speed_print * 25 / 35)
 speed_support_interface = =math.ceil(speed_support * 20 / 25)
diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg
index 19192bfba6..38f04547aa 100644
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.4
 machine_nozzle_size = 0.4
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
 speed_print = 45
diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg
index 925a9f68d6..e42817e8f8 100644
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.6
 machine_nozzle_size = 0.6
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
 speed_print = 45
diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
index 519b21c920..08ed6132f5 100644
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_topbottom = 20
diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
index b482c418f0..04a3a97d11 100644
--- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
@@ -29,7 +29,6 @@ raft_surface_layers = 1
 retraction_amount = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 retraction_speed = 25
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
index 09f528162d..fd4f1ff778 100644
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -14,7 +14,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 retraction_amount = 6.5
-retraction_min_travel = =line_width * 2
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index 660a6b10f4..07b556d206 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_wipe_enabled = True
 raft_surface_layers = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 3
 speed_prime_tower = =math.ceil(speed_print * 7 / 35)
 speed_print = 35
 speed_support = =math.ceil(speed_print * 25 / 35)
diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg
index 2058185bb8..7959fc75c2 100644
--- a/resources/variants/ultimaker_s5_bb04.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb04.inst.cfg
@@ -16,7 +16,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-retraction_min_travel = =3 * line_width
 speed_prime_tower = =math.ceil(speed_print * 10 / 35)
 speed_support = =math.ceil(speed_print * 25 / 35)
 speed_support_interface = =math.ceil(speed_support * 20 / 25)
diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg
index ef64dc0ae4..5510d0126f 100644
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.4
 machine_nozzle_size = 0.4
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
 speed_print = 45
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
index ba33bab17b..a49c790e4f 100644
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.6
 machine_nozzle_size = 0.6
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
 speed_print = 45
diff --git a/resources/variants/ultimaker_s7_aa0.25.inst.cfg b/resources/variants/ultimaker_s7_aa0.25.inst.cfg
index 1495af6c48..fc1bdcfef2 100644
--- a/resources/variants/ultimaker_s7_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s7_aa0.25.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = AA 0.25
 machine_nozzle_size = 0.25
 machine_nozzle_tip_outer_diameter = 0.65
-retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_topbottom = 20
diff --git a/resources/variants/ultimaker_s7_aa0.8.inst.cfg b/resources/variants/ultimaker_s7_aa0.8.inst.cfg
index a5b6a66516..b3253f7d25 100644
--- a/resources/variants/ultimaker_s7_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s7_aa0.8.inst.cfg
@@ -29,7 +29,6 @@ raft_surface_layers = 1
 retraction_amount = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 2
 retraction_speed = 25
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 25 / 35)
diff --git a/resources/variants/ultimaker_s7_aa04.inst.cfg b/resources/variants/ultimaker_s7_aa04.inst.cfg
index a9079c975e..6aee6597e0 100644
--- a/resources/variants/ultimaker_s7_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s7_aa04.inst.cfg
@@ -14,7 +14,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 retraction_amount = 6.5
-retraction_min_travel = =line_width * 2
 speed_print = 70
 speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
diff --git a/resources/variants/ultimaker_s7_bb0.8.inst.cfg b/resources/variants/ultimaker_s7_bb0.8.inst.cfg
index 6823fe18a4..010d5c7cf1 100644
--- a/resources/variants/ultimaker_s7_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s7_bb0.8.inst.cfg
@@ -31,7 +31,6 @@ raft_surface_layers = 1
 retraction_amount = 4.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
-retraction_min_travel = =line_width * 3
 speed_prime_tower = =math.ceil(speed_print * 7 / 35)
 speed_print = 35
 speed_support = =math.ceil(speed_print * 25 / 35)
diff --git a/resources/variants/ultimaker_s7_bb04.inst.cfg b/resources/variants/ultimaker_s7_bb04.inst.cfg
index bead299de3..1ec0dfab98 100644
--- a/resources/variants/ultimaker_s7_bb04.inst.cfg
+++ b/resources/variants/ultimaker_s7_bb04.inst.cfg
@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 retraction_amount = 4.5
-retraction_min_travel = =3 * line_width
 speed_prime_tower = =math.ceil(speed_print * 10 / 35)
 speed_support = =math.ceil(speed_print * 25 / 35)
 speed_support_interface = =math.ceil(speed_support * 20 / 25)
diff --git a/resources/variants/ultimaker_s7_cc04.inst.cfg b/resources/variants/ultimaker_s7_cc04.inst.cfg
index d46d387330..6949c5be74 100644
--- a/resources/variants/ultimaker_s7_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s7_cc04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.4
 machine_nozzle_size = 0.4
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
 speed_print = 45
diff --git a/resources/variants/ultimaker_s7_cc06.inst.cfg b/resources/variants/ultimaker_s7_cc06.inst.cfg
index d0c0d3670f..576701fc2b 100644
--- a/resources/variants/ultimaker_s7_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s7_cc06.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.6
 machine_nozzle_size = 0.6
-retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
 speed_print = 45