diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index f6cb2060c6..42d68acba8 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -615,7 +615,7 @@
                     "label": "Line Width",
                     "description": "Width of a single line. Generally, the width of each line should correspond to the width of the nozzle. However, slightly reducing this value could produce better prints.",
                     "unit": "mm",
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "minimum_value_warning": "0.5 * machine_nozzle_size",
                     "maximum_value_warning": "2 * machine_nozzle_size",
                     "default_value": 0.4,
@@ -629,7 +629,7 @@
                             "label": "Wall Line Width",
                             "description": "Width of a single wall line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "value": "line_width",
@@ -643,7 +643,7 @@
                                     "label": "Outer Wall Line Width",
                                     "description": "Width of the outermost wall line. By lowering this value, higher levels of detail can be printed.",
                                     "unit": "mm",
-                                    "minimum_value": "0.0001",
+                                    "minimum_value": "0.001",
                                     "minimum_value_warning": "0.75 * machine_nozzle_size if outer_inset_first else 0.1 * machine_nozzle_size",
                                     "maximum_value_warning": "2 * machine_nozzle_size",
                                     "default_value": 0.4,
@@ -656,7 +656,7 @@
                                     "label": "Inner Wall(s) Line Width",
                                     "description": "Width of a single wall line for all wall lines except the outermost one.",
                                     "unit": "mm",
-                                    "minimum_value": "0.0001",
+                                    "minimum_value": "0.001",
                                     "minimum_value_warning": "0.5 * machine_nozzle_size",
                                     "maximum_value_warning": "2 * machine_nozzle_size",
                                     "default_value": 0.4,
@@ -671,7 +671,7 @@
                             "label": "Top/Bottom Line Width",
                             "description": "Width of a single top/bottom line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.1 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -684,7 +684,7 @@
                             "label": "Infill Line Width",
                             "description": "Width of a single infill line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "3 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -698,7 +698,7 @@
                             "label": "Skirt/Brim Line Width",
                             "description": "Width of a single skirt or brim line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "3 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -713,7 +713,7 @@
                             "label": "Support Line Width",
                             "description": "Width of a single support structure line.",
                             "unit": "mm",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "3 * machine_nozzle_size",
                             "default_value": 0.4,
@@ -730,7 +730,7 @@
                             "description": "Width of a single support interface line.",
                             "unit": "mm",
                             "default_value": 0.4,
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.4 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "type": "float",
@@ -749,7 +749,7 @@
                             "enabled": "resolveOrValue('prime_tower_enable')",
                             "default_value": 0.4,
                             "value": "line_width",
-                            "minimum_value": "0.0001",
+                            "minimum_value": "0.001",
                             "minimum_value_warning": "0.75 * machine_nozzle_size",
                             "maximum_value_warning": "2 * machine_nozzle_size",
                             "settable_per_mesh": false,
@@ -3347,7 +3347,7 @@
                     "type": "float",
                     "default_value": 0.4,
                     "value": "line_width",
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.1",
                     "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
@@ -3395,7 +3395,7 @@
                     "type": "float",
                     "default_value": 0.7,
                     "value": "line_width * 2",
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
                     "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",
                     "enabled": "resolveOrValue('adhesion_type') == 'raft'",
@@ -3442,7 +3442,7 @@
                     "unit": "mm",
                     "type": "float",
                     "default_value": 0.8,
-                    "minimum_value": "0.0001",
+                    "minimum_value": "0.001",
                     "value": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 2",
                     "minimum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 0.5",
                     "maximum_value_warning": "extruderValue(adhesion_extruder_nr, 'machine_nozzle_size') * 3",