diff --git a/resources/definitions/galaxy_500.def.json b/resources/definitions/galaxy_500.def.json new file mode 100644 index 0000000000..7436ec207c --- /dev/null +++ b/resources/definitions/galaxy_500.def.json @@ -0,0 +1,36 @@ +{ + "name": "Galaxy 500", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Galaxy 500" }, + "machine_width": { "default_value": 400 }, + "machine_depth": { "default_value": 400 }, + "machine_height": { "default_value": 500 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" } + } +} diff --git a/resources/definitions/galaxy_600.def.json b/resources/definitions/galaxy_600.def.json new file mode 100644 index 0000000000..4b26135858 --- /dev/null +++ b/resources/definitions/galaxy_600.def.json @@ -0,0 +1,36 @@ +{ + "name": "Galaxy 600", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Galaxy 600" }, + "machine_width": { "default_value": 500 }, + "machine_depth": { "default_value": 500 }, + "machine_height": { "default_value": 600 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" } + } +} diff --git a/resources/definitions/orion.def.json b/resources/definitions/orion.def.json new file mode 100644 index 0000000000..a9823921ab --- /dev/null +++ b/resources/definitions/orion.def.json @@ -0,0 +1,19 @@ +{ + "name": "Orion", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "platform": "orion_platform.stl", + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Orion" }, + "machine_width": { "default_value": 500 }, + "machine_depth": { "default_value": 500 }, + "machine_height": { "default_value": 600 } + + } +} diff --git a/resources/definitions/orion_ht.def.json b/resources/definitions/orion_ht.def.json new file mode 100644 index 0000000000..16b9f77151 --- /dev/null +++ b/resources/definitions/orion_ht.def.json @@ -0,0 +1,20 @@ +{ + "name": "Orion HT", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "platform": "orion_platform.stl", + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Orion HT" }, + "machine_width": { "default_value": 500 }, + "machine_depth": { "default_value": 500 }, + "machine_height": { "default_value": 600 }, + "material_print_temperature": { "maximum value": 500 } + + } +} diff --git a/resources/definitions/signal_pro_300_v1.def.json b/resources/definitions/signal_pro_300_v1.def.json new file mode 100644 index 0000000000..5278817d0f --- /dev/null +++ b/resources/definitions/signal_pro_300_v1.def.json @@ -0,0 +1,36 @@ +{ + "name": "Signal Pro 300 v1", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal Pro 300 v1" }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 300 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" } + } +} diff --git a/resources/definitions/signal_pro_300_v2.def.json b/resources/definitions/signal_pro_300_v2.def.json new file mode 100644 index 0000000000..8e76e59cf7 --- /dev/null +++ b/resources/definitions/signal_pro_300_v2.def.json @@ -0,0 +1,18 @@ +{ + "name": "Signal Pro 300 v2", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "platform": "signal_pro_platform.stl", + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal Pro 300 v2" }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 300 } + } +} diff --git a/resources/definitions/signal_pro_400_v1.def.json b/resources/definitions/signal_pro_400_v1.def.json new file mode 100644 index 0000000000..5a52c41deb --- /dev/null +++ b/resources/definitions/signal_pro_400_v1.def.json @@ -0,0 +1,36 @@ +{ + "name": "Signal Pro 400 v1", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal Pro 400 v1" }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 400 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" } + } +} diff --git a/resources/definitions/signal_pro_400_v2.def.json b/resources/definitions/signal_pro_400_v2.def.json new file mode 100644 index 0000000000..e026ed8c16 --- /dev/null +++ b/resources/definitions/signal_pro_400_v2.def.json @@ -0,0 +1,18 @@ +{ + "name": "Signal Pro 400 v2", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "platform": "signal_pro_platform.stl", + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal Pro 400 v2" }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 400 } + } +} diff --git a/resources/definitions/signal_pro_500_v1.def.json b/resources/definitions/signal_pro_500_v1.def.json new file mode 100644 index 0000000000..a3ba297e99 --- /dev/null +++ b/resources/definitions/signal_pro_500_v1.def.json @@ -0,0 +1,36 @@ +{ + "name": "Signal Pro 500 v1", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal Pro 500 v1" }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 500 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" } + } +} diff --git a/resources/definitions/signal_pro_500_v2.def.json b/resources/definitions/signal_pro_500_v2.def.json new file mode 100644 index 0000000000..ecb57d2102 --- /dev/null +++ b/resources/definitions/signal_pro_500_v2.def.json @@ -0,0 +1,18 @@ +{ + "name": "Signal Pro 500 v2", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "platform": "signal_pro_platform.stl", + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal Pro 500 v2" }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 500 } + } +} diff --git a/resources/definitions/signal_pro_base.def.json b/resources/definitions/signal_pro_base.def.json new file mode 100644 index 0000000000..0c6b0e810c --- /dev/null +++ b/resources/definitions/signal_pro_base.def.json @@ -0,0 +1,312 @@ +{ + "name": "Signal Pro Base", + "version": 2, + "inherits": "fdmprinter", + "metadata": + { + "visible": false, + "author": "ATMAT", + "manufacturer": "ATMAT sp. z o.o.", + "file_formats": "text/x-gcode", + "preferred_quality_type": "fast", + "has_machine_quality": true, + "has_materials": true, + "has_variants": true, + "variants_name": "Nozzle", + "preferred_variant_name": "V6 0.40mm", + "machine_extruder_trains": + { + "0": "signal_pro_extruder_left", + "1": "signal_pro_extruder_right" + }, + "preferred_material": "generic_pla_175", + "supports_usb_connection": false, + "supports_network_connection": false, + "exclude_materials": [ + "ultimaker_abs_black", + "ultimaker_abs_blue", + "ultimaker_abs_green", + "ultimaker_abs_grey", + "ultimaker_abs_orange", + "ultimaker_abs_pearl-gold", + "ultimaker_abs_red", + "ultimaker_abs_silver-metallic", + "ultimaker_abs_white", + "ultimaker_abs_yellow", + "ultimaker_bam", + "ultimaker_cpe_black", + "ultimaker_cpe_blue", + "ultimaker_cpe_dark-grey", + "ultimaker_cpe_green", + "ultimaker_cpe_light-grey", + "ultimaker_cpe_plus_black", + "ultimaker_cpe_plus_transparent", + "ultimaker_cpe_plus_white", + "ultimaker_cpe_red", + "ultimaker_cpe_transparent", + "ultimaker_cpe_white", + "ultimaker_cpe_yellow", + "ultimaker_nylon_black", + "ultimaker_nylon_transparent", + "ultimaker_pc_black", + "ultimaker_pc_transparent", + "ultimaker_pc_white", + "ultimaker_pla_black", + "ultimaker_pla_blue", + "ultimaker_pla_green", + "ultimaker_pla_magenta", + "ultimaker_pla_orange", + "ultimaker_pla_pearl-white", + "ultimaker_pla_red", + "ultimaker_pla_silver-metallic", + "ultimaker_pla_transparent", + "ultimaker_pla_white", + "ultimaker_pla_yellow", + "ultimaker_pp_transparent", + "ultimaker_pva", + "ultimaker_tough_pla_black", + "ultimaker_tough_pla_green", + "ultimaker_tough_pla_red", + "ultimaker_tough_pla_white", + "ultimaker_tpu_black", + "ultimaker_tpu_blue", + "ultimaker_tpu_red", + "ultimaker_tpu_white", + "chromatik_pla", + "dsm_arnitel2045_175", + "dsm_novamid1070_175", + "emotiontech_abs", + "emotiontech_petg", + "emotiontech_pla", + "emotiontech_pva-m", + "emotiontech_pva-oks", + "emotiontech_pva-s", + "emotiontech_tpu98a", + "emotiontech_asax", + "emotiontech_hips", + "fiberlogy_hd_pla", + "fabtotum_abs", + "fabtotum_nylon", + "fabtotum_pla", + "fabtotum_tpu", + "filo3d_pla", + "filo3d_pla_green", + "filo3d_pla_red", + "generic_abs", + "generic_bam", + "generic_cffcpe", + "generic_cffpa", + "generic_cpe", + "generic_cpe_plus", + "generic_gffcpe", + "generic_gffpa", + "generic_hips", + "generic_nylon", + "generic_pc", + "generic_petg", + "generic_pla", + "generic_pp", + "generic_pva", + "generic_tough_pla", + "generic_tpu", + "generic_cpe_175", + "imade3d_petg_175", + "imade3d_pla_175", + "innofill_innoflex60_175", + "leapfrog_abs_natural", + "leapfrog_epla_natural", + "leapfrog_pva_natural", + "octofiber_pla", + "polyflex_pla", + "polymax_pla", + "polyplus_pla", + "polywood_pla", + "structur3d_dap100silicone", + "tizyx_abs", + "tizyx_flex", + "tizyx_petg", + "tizyx_pla", + "tizyx_pla_bois", + "tizyx_pva", + "ultimaker_abs_black", + "ultimaker_abs_blue", + "ultimaker_abs_green", + "ultimaker_abs_grey", + "ultimaker_abs_orange", + "ultimaker_abs_pearl-gold", + "ultimaker_abs_red", + "ultimaker_abs_silver-metallic", + "ultimaker_abs_white", + "ultimaker_abs_yellow", + "ultimaker_bam", + "ultimaker_cpe_black", + "ultimaker_cpe_blue", + "ultimaker_cpe_dark-grey", + "ultimaker_cpe_green", + "ultimaker_cpe_light-grey", + "ultimaker_cpe_plus_black", + "ultimaker_cpe_plus_transparent", + "ultimaker_cpe_plus_white", + "ultimaker_cpe_red", + "ultimaker_cpe_transparent", + "ultimaker_cpe_white", + "ultimaker_cpe_yellow", + "ultimaker_nylon_black", + "ultimaker_nylon_transparent", + "ultimaker_pc_black", + "ultimaker_pc_transparent", + "ultimaker_pc_white", + "ultimaker_pla_black", + "ultimaker_pla_blue", + "ultimaker_pla_green", + "ultimaker_pla_magenta", + "ultimaker_pla_orange", + "ultimaker_pla_pearl-white", + "ultimaker_pla_red", + "ultimaker_pla_silver-metallic", + "ultimaker_pla_transparent", + "ultimaker_pla_white", + "ultimaker_pla_yellow", + "ultimaker_pp_transparent", + "ultimaker_pva", + "ultimaker_tough_pla_black", + "ultimaker_tough_pla_green", + "ultimaker_tough_pla_red", + "ultimaker_tough_pla_white", + "ultimaker_tpu_black", + "ultimaker_tpu_blue", + "ultimaker_tpu_red", + "ultimaker_tpu_white", + "verbatim_bvoh_175", + "Vertex_Delta_ABS", + "Vertex_Delta_PET", + "Vertex_Delta_PLA", + "Vertex_Delta_PLA_Glitter", + "Vertex_Delta_PLA_Mat", + "Vertex_Delta_PLA_Satin", + "Vertex_Delta_PLA_Wood", + "Vertex_Delta_TPU", + "zyyx_pro_flex", + "zyyx_pro_pla" + + ] + }, + "overrides": + { + "machine_name": { "default_value": "Signal Pro" }, + "machine_width": { "default_value": 300 }, + "machine_depth": { "default_value": 300 }, + "machine_height": { "default_value": 300 }, + "gantry_height": { "value": 30 }, + "machine_extruder_count": { "default_value": 2 }, + "machine_heated_bed": { "default_value": true }, + "machine_heated_build_volume": { "default_value": true }, + "build_volume_temperature": { "maximum_value": 45 }, + "material_print_temperature": { "maximum value": 295 }, + "material_bed_temperature": { "maximum value": 140 }, + "machine_max_acceleration_x": { "default_value": 1500 }, + "machine_max_acceleration_y": { "default_value": 1500 }, + "machine_max_acceleration_z": { "default_value": 250 }, + "machine_acceleration": { "default_value": 1500 }, + "machine_max_jerk_xy": { "default_value": 10 }, + "machine_max_jerk_z": { "default_value": 1 }, + "machine_max_jerk_e": { "default_value": 10 }, + "machine_head_with_fans_polygon": { "default_value": [ [-35, 65], [-35, -50], [35, -50], [35, 65] ] }, + "machine_max_feedrate_z": { "default_value": 10 }, + "machine_max_feedrate_e": { "default_value": 120 }, + "machine_gcode_flavor": { "default_value": "Marlin" }, + "machine_start_gcode": { "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nG28 ; home all without mesh bed level\nM420 S1\nG92 E0.0 ; reset extruder distance position\nG1 Z0.25\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position" }, + "machine_end_gcode": { "default_value": "M104 T0 S0 ;extruder heater off\nM104 T1 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG91\nG1 Z1 F420 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 F300 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y300 F6000 ;move the head out of the way\nM84 ;steppers off" }, + "adhesion_type": { "default_value": "skirt" }, + "skirt_brim_minimal_length": { "default_value": 550 }, + "retraction_amount": { "value": "1" }, + "retraction_speed": { "default_value": 50, "maximum_value_warning": 130 }, + "retraction_retract_speed": { "default_value": "retraction_speed", "maximum_value_warning": 130 }, + "retraction_prime_speed": { "value": "math.ceil(retraction_speed * 0.4)", "maximum_value_warning": 130 }, + "retraction_hop_enabled": { "default_value": true }, + "retraction_hop": { "default_value": 0.5 }, + "retraction_combing": { "default_value": "noskin" }, + "retraction_combing_max_distance": { "default_value": 10 }, + "travel_avoid_other_parts": { "default_value": true }, + "travel_avoid_supports": { "default_value": true }, + "speed_travel": { "maximum_value": 150, "value": 150, "maximum_value_warning": 151 }, + "speed_travel_layer_0": { "value": "math.ceil(speed_travel * 0.4)" }, + "speed_layer_0": { "value": "math.ceil(speed_print * 0.25)" }, + "speed_wall": { "value": "math.ceil(speed_print * 0.50)" }, + "speed_wall_0": { "value": "math.ceil(speed_print * 0.50)" }, + "speed_wall_x": { "value": "math.ceil(speed_print * 0.75)" }, + "speed_topbottom": { "value": "math.ceil(speed_print * 0.45)" }, + "speed_roofing": { "value": "math.ceil(speed_print * 0.45)" }, + "speed_slowdown_layers": { "default_value": 2 }, + "roofing_layer_count": { "value": 1 }, + "optimize_wall_printing_order": { "default_value": true }, + "infill_enable_travel_optimization": { "default_value": true }, + "minimum_polygon_circumference": { "default_value": 0.2 }, + "wall_overhang_angle": { "default_value": 75 }, + "wall_overhang_speed_factor": { "default_value": 50 }, + "bridge_settings_enabled": { "default_value": true }, + "bridge_wall_coast": { "default_value": 10 }, + "bridge_fan_speed": { "default_value": 100 }, + "bridge_fan_speed_2": { "resolve": "max(cool_fan_speed, 50)" }, + "bridge_fan_speed_3": { "resolve": "max(cool_fan_speed, 20)" }, + "alternate_extra_perimeter": { "default_value": true }, + "cool_min_layer_time_fan_speed_max": { "default_value": 20 }, + "cool_min_layer_time": { "default_value": 15 }, + "cool_fan_speed_min": { "value": "cool_fan_speed" }, + "cool_fan_full_at_height": { "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)" }, + "cool_fan_full_layer": { "value": 4 }, + "layer_height_0": { "resolve": "max(0.2, min(extruderValues('layer_height')))" }, + "line_width": { "value": "machine_nozzle_size * 1.125" }, + "wall_line_width": { "value": "machine_nozzle_size" }, + "fill_perimeter_gaps": { "default_value": "everywhere" }, + "fill_outline_gaps": { "default_value": true }, + "meshfix_maximum_resolution": { "default_value": 0.01 }, + "meshfix_maximum_deviation": { "value": "layer_height / 2" }, + "infill_before_walls": { "default_value": false }, + "zig_zaggify_infill": { "value": true }, + "min_infill_area": { "default_value": 5.0 }, + "acceleration_enabled": { "value": "True" }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "1000" }, + "acceleration_print": { "value": "1000" }, + "acceleration_travel": { "value": "1000" }, + "acceleration_support": { "value": "1000" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_enabled": { "default_value": true }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "10" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" }, + "prime_tower_position_x": { "default_value": 270 }, + "prime_tower_position_y": { "default_value": 270 }, + "extruder_prime_pos_abs": { "default_value": true }, + "switch_extruder_prime_speed": { "value": "15" }, + "switch_extruder_retraction_amount": { "value": "2" }, + "support_xy_distance": { "value": "wall_line_width_0 * 2.5" }, + "support_xy_distance_overhang": { "value": "wall_line_width_0" }, + "support_angle": { "value": 60 }, + "support_bottom_distance": { "value": "support_z_distance / 2" }, + "support_pattern": { "default_value": "zigzag" }, + "support_top_distance": { "value": "support_z_distance" }, + "support_use_towers": { "value": true }, + "support_z_distance": { "value": "layer_height" }, + "support_interface_enable": { "value": true }, + "support_interface_height": { "value": 1 }, + "support_interface_skip_height": { "value": "layer_height" }, + "support_bottom_enable": { "value": false }, + "support_join_distance": { "value": 1 }, + "support_offset": { "value": 1.5 }, + "support_infill_rate": { "value": 20 }, + "support_brim_enable": { "value": true }, + "prime_tower_enable": { "value": "True" } + } +} \ No newline at end of file diff --git a/resources/definitions/signal_xl.def.json b/resources/definitions/signal_xl.def.json new file mode 100644 index 0000000000..974b2dba94 --- /dev/null +++ b/resources/definitions/signal_xl.def.json @@ -0,0 +1,40 @@ +{ + "name": "Signal XL", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal XL" }, + "machine_width": { "default_value": 310 }, + "machine_depth": { "default_value": 320 }, + "machine_height": { "default_value": 260 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" }, + "machine_extruder_count": { "default_value": 1 }, + "machine_heated_build_volume": { "default_value": false }, + "machine_gcode_flavor": { "default_value": "Repetier" } + + } +} diff --git a/resources/definitions/signal_xxl.def.json b/resources/definitions/signal_xxl.def.json new file mode 100644 index 0000000000..72b535d3e0 --- /dev/null +++ b/resources/definitions/signal_xxl.def.json @@ -0,0 +1,40 @@ +{ + "name": "Signal XXL", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal XXL" }, + "machine_width": { "default_value": 310 }, + "machine_depth": { "default_value": 320 }, + "machine_height": { "default_value": 385 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" }, + "machine_extruder_count": { "default_value": 1 }, + "machine_heated_build_volume": { "default_value": false }, + "machine_gcode_flavor": { "default_value": "Repetier" } + + } +} diff --git a/resources/definitions/signal_xxxl.def.json b/resources/definitions/signal_xxxl.def.json new file mode 100644 index 0000000000..34d5ba2a44 --- /dev/null +++ b/resources/definitions/signal_xxxl.def.json @@ -0,0 +1,40 @@ +{ + "name": "Signal XXXL", + "version": 2, + "inherits": "signal_pro_base", + "metadata": + { + "visible": true, + "quality_definition": "signal_pro_base" + }, + "overrides": + { + "machine_name": { "default_value": "Signal XXXL" }, + "machine_width": { "default_value": 310 }, + "machine_depth": { "default_value": 320 }, + "machine_height": { "default_value": 500 }, + "acceleration_layer_0": { "value": "250" }, + "acceleration_prime_tower": { "value": "750" }, + "acceleration_print": { "value": "750" }, + "acceleration_travel": { "value": "750" }, + "acceleration_support": { "value": "750" }, + "acceleration_support_interface": { "value": "750" }, + "acceleration_topbottom": { "value": "750" }, + "acceleration_wall": { "value": "750" }, + "acceleration_wall_0": { "value": "500" }, + "jerk_layer_0": { "value": "5" }, + "jerk_prime_tower": { "value": "jerk_print" }, + "jerk_print": { "value": "7.5" }, + "jerk_support": { "value": "jerk_print" }, + "jerk_support_interface": { "value": "jerk_print" }, + "jerk_topbottom": { "value": "jerk_print" }, + "jerk_wall": { "value": "jerk_print" }, + "jerk_wall_0": { "value": "jerk_print" }, + "jerk_travel": { "value": "jerk_layer_0" }, + "jerk_travel_layer_0": { "value": "jerk_layer_0" }, + "machine_extruder_count": { "default_value": 1 }, + "machine_heated_build_volume": { "default_value": false }, + "machine_gcode_flavor": { "default_value": "Repetier" } + + } +} diff --git a/resources/extruders/signal_pro_extruder_left.def.json b/resources/extruders/signal_pro_extruder_left.def.json new file mode 100644 index 0000000000..59b7ad79d8 --- /dev/null +++ b/resources/extruders/signal_pro_extruder_left.def.json @@ -0,0 +1,29 @@ +{ + "id": "signal_pro_extruder_left", + "version": 2, + "name": "Extruder 1", + "inherits": "fdmextruder", + "metadata": { + "machine": "signal_pro_base", + "position": "0" + }, + + "overrides": { + "extruder_nr": { + "default_value": 0, + "maximum_value": "1" + }, + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 }, + "machine_extruder_start_pos_abs": { "default_value": true }, + "machine_extruder_start_pos_x": { "default_value": 270 }, + "machine_extruder_start_pos_y": { "default_value": 270 }, + "machine_extruder_end_pos_abs": { "default_value": true }, + "machine_extruder_end_pos_x": { "default_value": 270 }, + "machine_extruder_end_pos_y": { "default_value": 270 }, + "extruder_prime_pos_x": { "default_value": 0 }, + "extruder_prime_pos_y": { "default_value": 0 }, + "extruder_prime_pos_z": { "default_value": 0 }, + "material_diameter": { "default_value": 1.75 } + } +} diff --git a/resources/extruders/signal_pro_extruder_right.def.json b/resources/extruders/signal_pro_extruder_right.def.json new file mode 100644 index 0000000000..219f4c02ad --- /dev/null +++ b/resources/extruders/signal_pro_extruder_right.def.json @@ -0,0 +1,29 @@ +{ + "id": "signal_pro_extruder_right", + "version": 2, + "name": "Extruder 2", + "inherits": "fdmextruder", + "metadata": { + "machine": "signal_pro_base", + "position": "1" + }, + + "overrides": { + "extruder_nr": { + "default_value": 1, + "maximum_value": "1" + }, + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 }, + "machine_extruder_start_pos_abs": { "default_value": true }, + "machine_extruder_start_pos_x": { "default_value": 270 }, + "machine_extruder_start_pos_y": { "default_value": 270 }, + "machine_extruder_end_pos_abs": { "default_value": true }, + "machine_extruder_end_pos_x": { "default_value": 270 }, + "machine_extruder_end_pos_y": { "default_value": 270 }, + "extruder_prime_pos_x": { "default_value": 0 }, + "extruder_prime_pos_y": { "default_value": 0 }, + "extruder_prime_pos_z": { "default_value": 0 }, + "material_diameter": { "default_value": 1.75 } + } +} diff --git a/resources/meshes/orion_platform.STL b/resources/meshes/orion_platform.STL new file mode 100644 index 0000000000..23a97bb578 Binary files /dev/null and b/resources/meshes/orion_platform.STL differ diff --git a/resources/meshes/signal_pro_platform.STL b/resources/meshes/signal_pro_platform.STL new file mode 100644 index 0000000000..bc28f673b6 Binary files /dev/null and b/resources/meshes/signal_pro_platform.STL differ diff --git a/resources/quality/signal_pro/signal_pro_global_extrafast_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_extrafast_quality.inst.cfg new file mode 100644 index 0000000000..1d135ea1da --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_extrafast_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +global_quality = True + +[values] +layer_height = 0.3 + diff --git a/resources/quality/signal_pro/signal_pro_global_extrafine_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_extrafine_quality.inst.cfg new file mode 100644 index 0000000000..4755322809 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_extrafine_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Extra Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafine +global_quality = True + +[values] +layer_height = 0.06 + diff --git a/resources/quality/signal_pro/signal_pro_global_fast_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_fast_quality.inst.cfg new file mode 100644 index 0000000000..13f299aa50 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_fast_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +global_quality = True + +[values] +layer_height = 0.2 + diff --git a/resources/quality/signal_pro/signal_pro_global_fine_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_fine_quality.inst.cfg new file mode 100644 index 0000000000..8cc87eed05 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_fine_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +global_quality = True + +[values] +layer_height = 0.1 + diff --git a/resources/quality/signal_pro/signal_pro_global_normal_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_normal_quality.inst.cfg new file mode 100644 index 0000000000..e9266db315 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_normal_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +global_quality = True + +[values] +layer_height = 0.15 + diff --git a/resources/quality/signal_pro/signal_pro_global_sprint_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_sprint_quality.inst.cfg new file mode 100644 index 0000000000..10653b7192 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_sprint_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +global_quality = True + +[values] +layer_height = 0.4 + diff --git a/resources/quality/signal_pro/signal_pro_global_supersprint_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_supersprint_quality.inst.cfg new file mode 100644 index 0000000000..bd832f5976 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_supersprint_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +global_quality = True + +[values] +layer_height = 0.5 + diff --git a/resources/quality/signal_pro/signal_pro_global_ultrasprint_quality.inst.cfg b/resources/quality/signal_pro/signal_pro_global_ultrasprint_quality.inst.cfg new file mode 100644 index 0000000000..d17ec17be8 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_global_ultrasprint_quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Ultra Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = ultrasprint +global_quality = True + +[values] +layer_height = 0.6 + diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_extrafast.inst.cfg new file mode 100644 index 0000000000..7eb0b091f3 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_abs_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 40 +speed_print = 50 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_fast.inst.cfg new file mode 100644 index 0000000000..75ea918596 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_fast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_abs_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 40 +speed_print = 50 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_fine.inst.cfg new file mode 100644 index 0000000000..07f2104aee --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_fine.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_abs_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 40 +speed_print = 50 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_normal.inst.cfg new file mode 100644 index 0000000000..fd1451be52 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_ABS_normal.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_abs_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 40 +speed_print = 50 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_extrafast.inst.cfg new file mode 100644 index 0000000000..a6da6897b6 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_hips_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 25 +material_print_temperature = =default_material_print_temperature + 50 +build_volume_temperature = 40 +speed_print = 40 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_fast.inst.cfg new file mode 100644 index 0000000000..8485e6160f --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_fast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_hips_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 25 +material_print_temperature = =default_material_print_temperature + 50 +build_volume_temperature = 40 +speed_print = 40 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_fine.inst.cfg new file mode 100644 index 0000000000..c8678cc347 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_fine.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_hips_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 25 +material_print_temperature = =default_material_print_temperature + 50 +build_volume_temperature = 40 +speed_print = 40 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_normal.inst.cfg new file mode 100644 index 0000000000..6eef394cea --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_HIPS_normal.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_hips_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 25 +material_print_temperature = =default_material_print_temperature + 50 +build_volume_temperature = 40 +speed_print = 40 +retraction_amount = 1 +cool_fan_enabled = False diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PA_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_extrafast.inst.cfg new file mode 100644 index 0000000000..3284295a42 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_nylon_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 10 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 40 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PA_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_fast.inst.cfg new file mode 100644 index 0000000000..196968c763 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_fast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_nylon_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 10 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 40 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PA_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_fine.inst.cfg new file mode 100644 index 0000000000..b61903100e --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_fine.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_nylon_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 10 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 40 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PA_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_normal.inst.cfg new file mode 100644 index 0000000000..3f8b136cf1 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PA_normal.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_nylon_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 10 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 40 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PC_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_extrafast.inst.cfg new file mode 100644 index 0000000000..350658b56c --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_pc_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 13 +build_volume_temperature = 45 +speed_print = 25 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PC_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_fast.inst.cfg new file mode 100644 index 0000000000..c8776e99bf --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_fast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_pc_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 13 +build_volume_temperature = 45 +speed_print = 25 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PC_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_fine.inst.cfg new file mode 100644 index 0000000000..4838004734 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_fine.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_pc_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 13 +build_volume_temperature = 45 +speed_print = 25 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PC_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_normal.inst.cfg new file mode 100644 index 0000000000..a9855fe14f --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PC_normal.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_pc_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 13 +build_volume_temperature = 45 +speed_print = 25 +retraction_amount = 1 +cool_fan_enabled = False diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_extrafast.inst.cfg new file mode 100644 index 0000000000..5db882569d --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_extrafast.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_petg_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature - 5 +material_print_temperature = =default_material_print_temperature + 30 +speed_print = 60 +retraction_amount = 1 +cool_fan_speed = 30 +cool_fan_speed_max = 50 +support_fan_enable = True +support_supported_skin_fan_speed = 100 diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_fast.inst.cfg new file mode 100644 index 0000000000..c346f9b10a --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_fast.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_petg_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature - 5 +material_print_temperature = =default_material_print_temperature + 30 +speed_print = 60 +retraction_amount = 1 +cool_fan_speed = 30 +cool_fan_speed_max = 50 +support_fan_enable = True +support_supported_skin_fan_speed = 100 diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_fine.inst.cfg new file mode 100644 index 0000000000..1c393bd1dc --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_fine.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_petg_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature - 5 +material_print_temperature = =default_material_print_temperature + 30 +speed_print = 60 +retraction_amount = 1 +cool_fan_speed = 30 +cool_fan_speed_max = 50 +support_fan_enable = True +support_supported_skin_fan_speed = 100 diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_normal.inst.cfg new file mode 100644 index 0000000000..6b07333d75 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PETG_normal.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_petg_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature - 5 +material_print_temperature = =default_material_print_temperature + 30 +speed_print = 60 +retraction_amount = 1 +cool_fan_speed = 30 +cool_fan_speed_max = 50 +support_fan_enable = True +support_supported_skin_fan_speed = 100 diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_extrafast.inst.cfg new file mode 100644 index 0000000000..6c01de1795 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_extrafast.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_pla_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature + 20 +speed_print = 70 +retraction_amount = 0.75 +cool_fan_speed = 75 +cool_fan_speed_max = 100 +support_fan_enable = True +support_supported_skin_fan_speed = 100 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_fast.inst.cfg new file mode 100644 index 0000000000..ed2db8a892 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_fast.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_pla_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature + 15 +speed_print = 70 +retraction_amount = 0.75 +cool_fan_speed = 75 +cool_fan_speed_max = 100 +support_fan_enable = True +support_supported_skin_fan_speed = 100 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_fine.inst.cfg new file mode 100644 index 0000000000..01d83f12a4 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_fine.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_pla_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature + 5 +speed_print = 70 +retraction_amount = 0.75 +cool_fan_speed = 75 +cool_fan_speed_max = 100 +support_fan_enable = True +support_supported_skin_fan_speed = 100 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_normal.inst.cfg new file mode 100644 index 0000000000..46a291da7a --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PLA_normal.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_pla_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature + 10 +speed_print = 70 +retraction_amount = 0.75 +cool_fan_speed = 75 +cool_fan_speed_max = 100 +support_fan_enable = True +support_supported_skin_fan_speed = 100 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_extrafast.inst.cfg new file mode 100644 index 0000000000..1758ebcd19 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_extrafast.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_pva_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False +brim_replaces_support = False +support_brim_enable = True +support_pattern = triangles +support_xy_distance_overhang = 0 +support_bottom_distance = =support_z_distance +support_use_towers = False +support_z_distance = 0 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_fast.inst.cfg new file mode 100644 index 0000000000..fbb8e62c17 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_fast.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_pva_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False +brim_replaces_support = False +support_brim_enable = True +support_pattern = triangles +support_xy_distance_overhang = 0 +support_bottom_distance = =support_z_distance +support_use_towers = False +support_z_distance = 0 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_fine.inst.cfg new file mode 100644 index 0000000000..c461210c37 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_fine.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_pva_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False +brim_replaces_support = False +support_brim_enable = True +support_pattern = triangles +support_xy_distance_overhang = 0 +support_bottom_distance = =support_z_distance +support_use_towers = False +support_z_distance = 0 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_normal.inst.cfg new file mode 100644 index 0000000000..af772a6c15 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_PVA_normal.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_pva_175 +variant = V6 0.40mm + +[values] +material_print_temperature = =default_material_print_temperature +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False +brim_replaces_support = False +support_brim_enable = True +support_pattern = triangles +support_xy_distance_overhang = 0 +support_bottom_distance = =support_z_distance +support_use_towers = False +support_z_distance = 0 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_extrafast.inst.cfg new file mode 100644 index 0000000000..37de60fab3 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_tpu_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 60 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 30 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_fast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_fast.inst.cfg new file mode 100644 index 0000000000..6a2d5bbf41 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_fast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fast +material = generic_tpu_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 60 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 30 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_fine.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_fine.inst.cfg new file mode 100644 index 0000000000..7ffd487188 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_fine.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Fine +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = fine +material = generic_tpu_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 60 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 30 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_normal.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_normal.inst.cfg new file mode 100644 index 0000000000..ea69da5ff1 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.40_TPU_normal.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Normal +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = normal +material = generic_tpu_175 +variant = V6 0.40mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 60 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 30 +speed_print = 30 +retraction_amount = 1 +cool_fan_enabled = False diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_extrafast.inst.cfg new file mode 100644 index 0000000000..66e197b1b2 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_abs_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 40 +speed_print = 50 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_sprint.inst.cfg new file mode 100644 index 0000000000..3704e8acc5 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_sprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_abs_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 40 +speed_print = 50 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_supersprint.inst.cfg new file mode 100644 index 0000000000..bd26a47d4d --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_ABS_supersprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_abs_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 40 +speed_print = 50 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_extrafast.inst.cfg new file mode 100644 index 0000000000..f23d27cba4 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_hips_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 35 +material_print_temperature = =default_material_print_temperature + 50 +build_volume_temperature = 40 +speed_print = 40 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_sprint.inst.cfg new file mode 100644 index 0000000000..7ff1fa9c47 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_sprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_hips_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 35 +material_print_temperature = =default_material_print_temperature + 50 +build_volume_temperature = 40 +speed_print = 40 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_supersprint.inst.cfg new file mode 100644 index 0000000000..eccf46011c --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_HIPS_supersprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_hips_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 35 +material_print_temperature = =default_material_print_temperature + 50 +build_volume_temperature = 40 +speed_print = 40 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PA_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PA_extrafast.inst.cfg new file mode 100644 index 0000000000..5d40c60643 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PA_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_nylon_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 40 +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PA_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PA_sprint.inst.cfg new file mode 100644 index 0000000000..4d98c866a5 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PA_sprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_nylon_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 40 +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PA_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PA_supersprint.inst.cfg new file mode 100644 index 0000000000..290c75ecc6 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PA_supersprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_nylon_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 20 +build_volume_temperature = 40 +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PC_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PC_extrafast.inst.cfg new file mode 100644 index 0000000000..b70375f75d --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PC_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_pc_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 13 +build_volume_temperature = 45 +speed_print = 25 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PC_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PC_sprint.inst.cfg new file mode 100644 index 0000000000..9589764b60 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PC_sprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_pc_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 13 +build_volume_temperature = 45 +speed_print = 25 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PC_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PC_supersprint.inst.cfg new file mode 100644 index 0000000000..80dd901ed5 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PC_supersprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_pc_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 20 +material_print_temperature = =default_material_print_temperature + 13 +build_volume_temperature = 45 +speed_print = 25 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_extrafast.inst.cfg new file mode 100644 index 0000000000..880d56e571 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_extrafast.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_petg_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature - 5 +material_print_temperature = =default_material_print_temperature + 40 +speed_print = 40 +retraction_amount = 1.2 +cool_fan_speed = 30 +cool_fan_speed_max = 50 +support_fan_enable = True +support_supported_skin_fan_speed = 100 diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_sprint.inst.cfg new file mode 100644 index 0000000000..391677935d --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_sprint.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_petg_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature - 5 +material_print_temperature = =default_material_print_temperature + 40 +speed_print = 30 +retraction_amount = 1.2 +cool_fan_speed = 30 +cool_fan_speed_max = 50 +support_fan_enable = True +support_supported_skin_fan_speed = 100 diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_supersprint.inst.cfg new file mode 100644 index 0000000000..0039deef9b --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PETG_supersprint.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_petg_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature - 5 +material_print_temperature = =default_material_print_temperature + 40 +speed_print = 24 +retraction_amount = 1.2 +cool_fan_speed = 30 +cool_fan_speed_max = 50 +support_fan_enable = True +support_supported_skin_fan_speed = 100 diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_extrafast.inst.cfg new file mode 100644 index 0000000000..9bd7af723f --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_extrafast.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_pla_175 +variant = V6 0.80mm + +[values] +material_print_temperature = =default_material_print_temperature + 25 +speed_print = 40 +retraction_amount = 1 +cool_fan_speed = 75 +cool_fan_speed_max = 100 +support_fan_enable = True +support_supported_skin_fan_speed = 100 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_sprint.inst.cfg new file mode 100644 index 0000000000..f165356e0f --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_sprint.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_pla_175 +variant = V6 0.80mm + +[values] +material_print_temperature = =default_material_print_temperature + 30 +speed_print = 30 +retraction_amount = 1 +cool_fan_speed = 75 +cool_fan_speed_max = 100 +support_fan_enable = True +support_supported_skin_fan_speed = 100 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_supersprint.inst.cfg new file mode 100644 index 0000000000..8f91295efc --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PLA_supersprint.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_pla_175 +variant = V6 0.80mm + +[values] +material_print_temperature = =default_material_print_temperature + 30 +speed_print = 24 +retraction_amount = 1 +cool_fan_speed = 75 +cool_fan_speed_max = 100 +support_fan_enable = True +support_supported_skin_fan_speed = 100 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_extrafast.inst.cfg new file mode 100644 index 0000000000..81d9e12361 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_extrafast.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_pva_175 +variant = V6 0.80mm + +[values] +material_print_temperature = =default_material_print_temperature +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False +brim_replaces_support = False +support_brim_enable = True +support_pattern = triangles +support_xy_distance_overhang = 0 +support_bottom_distance = =support_z_distance +support_use_towers = False +support_z_distance = 0 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_sprint.inst.cfg new file mode 100644 index 0000000000..1c9bfc8b09 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_sprint.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_pva_175 +variant = V6 0.80mm + +[values] +material_print_temperature = =default_material_print_temperature +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False +brim_replaces_support = False +support_brim_enable = True +support_pattern = triangles +support_xy_distance_overhang = 0 +support_bottom_distance = =support_z_distance +support_use_towers = False +support_z_distance = 0 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_supersprint.inst.cfg new file mode 100644 index 0000000000..4e408e5078 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_PVA_supersprint.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_pva_175 +variant = V6 0.80mm + +[values] +material_print_temperature = =default_material_print_temperature +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False +brim_replaces_support = False +support_brim_enable = True +support_pattern = triangles +support_xy_distance_overhang = 0 +support_bottom_distance = =support_z_distance +support_use_towers = False +support_z_distance = 0 \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_extrafast.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_extrafast.inst.cfg new file mode 100644 index 0000000000..0c7af98ae1 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_extrafast.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = extrafast +material = generic_tpu_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 60 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 30 +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_sprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_sprint.inst.cfg new file mode 100644 index 0000000000..3c70c92a83 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_sprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = sprint +material = generic_tpu_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 60 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 30 +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_supersprint.inst.cfg b/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_supersprint.inst.cfg new file mode 100644 index 0000000000..c1ba8b09e2 --- /dev/null +++ b/resources/quality/signal_pro/signal_pro_v6_0.80_TPU_supersprint.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Super Sprint +definition = signal_pro_base + +[metadata] +setting_version = 10 +type = quality +quality_type = supersprint +material = generic_tpu_175 +variant = V6 0.80mm + +[values] +material_bed_temperature = =default_material_bed_temperature + 60 +material_print_temperature = =default_material_print_temperature + 25 +build_volume_temperature = 30 +speed_print = 30 +retraction_amount = 1.2 +cool_fan_enabled = False \ No newline at end of file diff --git a/resources/variants/galaxy_500_v6_0.40.inst.cfg b/resources/variants/galaxy_500_v6_0.40.inst.cfg new file mode 100644 index 0000000000..1e61ee0345 --- /dev/null +++ b/resources/variants/galaxy_500_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = galaxy_500 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/galaxy_500_v6_0.80.inst.cfg b/resources/variants/galaxy_500_v6_0.80.inst.cfg new file mode 100644 index 0000000000..ffbeb4d4da --- /dev/null +++ b/resources/variants/galaxy_500_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = galaxy_500 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/galaxy_600_v6_0.40.inst.cfg b/resources/variants/galaxy_600_v6_0.40.inst.cfg new file mode 100644 index 0000000000..26e7570b51 --- /dev/null +++ b/resources/variants/galaxy_600_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = galaxy_600 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/galaxy_600_v6_0.80.inst.cfg b/resources/variants/galaxy_600_v6_0.80.inst.cfg new file mode 100644 index 0000000000..4f34fcf939 --- /dev/null +++ b/resources/variants/galaxy_600_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = galaxy_600 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/orion_ht_v6_0.40.inst.cfg b/resources/variants/orion_ht_v6_0.40.inst.cfg new file mode 100644 index 0000000000..6ec48155c6 --- /dev/null +++ b/resources/variants/orion_ht_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = orion_ht + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/orion_ht_v6_0.80.inst.cfg b/resources/variants/orion_ht_v6_0.80.inst.cfg new file mode 100644 index 0000000000..e91d2fe26b --- /dev/null +++ b/resources/variants/orion_ht_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = orion_ht + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/orion_v6_0.40.inst.cfg b/resources/variants/orion_v6_0.40.inst.cfg new file mode 100644 index 0000000000..b4c0399973 --- /dev/null +++ b/resources/variants/orion_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = orion + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/orion_v6_0.80.inst.cfg b/resources/variants/orion_v6_0.80.inst.cfg new file mode 100644 index 0000000000..7d409df4dd --- /dev/null +++ b/resources/variants/orion_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = orion + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_pro_300_v1_v6_0.40.inst.cfg b/resources/variants/signal_pro_300_v1_v6_0.40.inst.cfg new file mode 100644 index 0000000000..2e90593c54 --- /dev/null +++ b/resources/variants/signal_pro_300_v1_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_pro_300_v1 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_pro_300_v1_v6_0.80.inst.cfg b/resources/variants/signal_pro_300_v1_v6_0.80.inst.cfg new file mode 100644 index 0000000000..3111288403 --- /dev/null +++ b/resources/variants/signal_pro_300_v1_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_pro_300_v1 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_pro_300_v2_v6_0.40.inst.cfg b/resources/variants/signal_pro_300_v2_v6_0.40.inst.cfg new file mode 100644 index 0000000000..c9923a3c7b --- /dev/null +++ b/resources/variants/signal_pro_300_v2_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_pro_300_v2 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_pro_300_v2_v6_0.80.inst.cfg b/resources/variants/signal_pro_300_v2_v6_0.80.inst.cfg new file mode 100644 index 0000000000..4a2c3427bb --- /dev/null +++ b/resources/variants/signal_pro_300_v2_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_pro_300_v2 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_pro_400_v1_v6_0.40.inst.cfg b/resources/variants/signal_pro_400_v1_v6_0.40.inst.cfg new file mode 100644 index 0000000000..65ec89101a --- /dev/null +++ b/resources/variants/signal_pro_400_v1_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_pro_400_v1 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_pro_400_v1_v6_0.80.inst.cfg b/resources/variants/signal_pro_400_v1_v6_0.80.inst.cfg new file mode 100644 index 0000000000..f7fbc9cab2 --- /dev/null +++ b/resources/variants/signal_pro_400_v1_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_pro_400_v1 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_pro_400_v2_v6_0.40.inst.cfg b/resources/variants/signal_pro_400_v2_v6_0.40.inst.cfg new file mode 100644 index 0000000000..2dbdc31968 --- /dev/null +++ b/resources/variants/signal_pro_400_v2_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_pro_400_v2 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_pro_400_v2_v6_0.80.inst.cfg b/resources/variants/signal_pro_400_v2_v6_0.80.inst.cfg new file mode 100644 index 0000000000..cd6aef9ff9 --- /dev/null +++ b/resources/variants/signal_pro_400_v2_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_pro_400_v2 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_pro_500_v1_v6_0.40.inst.cfg b/resources/variants/signal_pro_500_v1_v6_0.40.inst.cfg new file mode 100644 index 0000000000..9e8117bd20 --- /dev/null +++ b/resources/variants/signal_pro_500_v1_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_pro_500_old + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_pro_500_v1_v6_0.80.inst.cfg b/resources/variants/signal_pro_500_v1_v6_0.80.inst.cfg new file mode 100644 index 0000000000..b770bf9943 --- /dev/null +++ b/resources/variants/signal_pro_500_v1_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_pro_500_old + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_pro_500_v2_v6_0.40.inst.cfg b/resources/variants/signal_pro_500_v2_v6_0.40.inst.cfg new file mode 100644 index 0000000000..b0ea16d089 --- /dev/null +++ b/resources/variants/signal_pro_500_v2_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_pro_500_v2 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_pro_500_v2_v6_0.80.inst.cfg b/resources/variants/signal_pro_500_v2_v6_0.80.inst.cfg new file mode 100644 index 0000000000..f23dab88c7 --- /dev/null +++ b/resources/variants/signal_pro_500_v2_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_pro_500_v2 + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_xl_v6_0.40.inst.cfg b/resources/variants/signal_xl_v6_0.40.inst.cfg new file mode 100644 index 0000000000..beef33d8cb --- /dev/null +++ b/resources/variants/signal_xl_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_xl + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_xl_v6_0.80.inst.cfg b/resources/variants/signal_xl_v6_0.80.inst.cfg new file mode 100644 index 0000000000..530a9f014d --- /dev/null +++ b/resources/variants/signal_xl_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_xl + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_xxl_v6_0.40.inst.cfg b/resources/variants/signal_xxl_v6_0.40.inst.cfg new file mode 100644 index 0000000000..91c87d6216 --- /dev/null +++ b/resources/variants/signal_xxl_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_xxl + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_xxl_v6_0.80.inst.cfg b/resources/variants/signal_xxl_v6_0.80.inst.cfg new file mode 100644 index 0000000000..c508d48923 --- /dev/null +++ b/resources/variants/signal_xxl_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_xxl + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55 diff --git a/resources/variants/signal_xxxl_v6_0.40.inst.cfg b/resources/variants/signal_xxxl_v6_0.40.inst.cfg new file mode 100644 index 0000000000..d41484da58 --- /dev/null +++ b/resources/variants/signal_xxxl_v6_0.40.inst.cfg @@ -0,0 +1,12 @@ +[general] +name = V6 0.40mm +version = 4 +definition = signal_xxxl + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.4 diff --git a/resources/variants/signal_xxxl_v6_0.80.inst.cfg b/resources/variants/signal_xxxl_v6_0.80.inst.cfg new file mode 100644 index 0000000000..f456ab33b5 --- /dev/null +++ b/resources/variants/signal_xxxl_v6_0.80.inst.cfg @@ -0,0 +1,13 @@ +[general] +name = V6 0.80mm +version = 4 +definition = signal_xxxl + +[metadata] +setting_version = 10 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_size = 0.8 +support_angle = 55