Merge branch 'master'

.gitignore

@@ -5,8 +5,8 @@ __pycache__
 *.mo
 docs/html
 *.log
-resources/i18n/en
-resources/i18n/7s
+resources/i18n/en_US
+resources/i18n/en_7S
 resources/i18n/x-test
 resources/firmware
 resources/materials

cura/ArrangeObjectsJob.py

@@ -27,7 +27,11 @@ class ArrangeObjectsJob(Job):
         self._min_offset = min_offset
 
     def run(self):
-        status_message = Message(i18n_catalog.i18nc("@info:status", "Finding new location for objects"), lifetime = 0, dismissable=False, progress = 0)
+        status_message = Message(i18n_catalog.i18nc("@info:status", "Finding new location for objects"),
+                                 lifetime = 0,
+                                 dismissable=False,
+                                 progress = 0,
+                                 title = i18n_catalog.i18nc("@info:title", "Finding Location"))
         status_message.show()
         arranger = Arrange.create(fixed_nodes = self._fixed_nodes)
 
@@ -82,5 +86,6 @@ class ArrangeObjectsJob(Job):
         status_message.hide()
 
         if not found_solution_for_all:
-            no_full_solution_message = Message(i18n_catalog.i18nc("@info:status", "Unable to find a location within the build volume for all objects"))
+            no_full_solution_message = Message(i18n_catalog.i18nc("@info:status", "Unable to find a location within the build volume for all objects"),
+                                               title = i18n_catalog.i18nc("@info:title", "Can't Find Location"))
             no_full_solution_message.show()

cura/BuildVolume.py

@@ -27,9 +27,8 @@ import math
 
 from typing import List
 
-PRIME_CLEARANCE = 6.5 #Setting for clearance around the prime.
-MAJOR_GRID_SIZE = 10 #Size of the grid cells.
-MINOR_GRID_SIZE = 1
+# Setting for clearance around the prime
+PRIME_CLEARANCE = 6.5
 
 
 ##  Build volume is a special kind of node that is responsible for rendering the printable area & disallowed areas.
@@ -45,8 +44,6 @@ class BuildVolume(SceneNode):
         self._z_axis_color = None
         self._disallowed_area_color = None
         self._error_area_color = None
-        self._grid_color = None
-        self._grid_minor_color = None
 
         self._width = 0
         self._height = 0
@@ -59,9 +56,8 @@ class BuildVolume(SceneNode):
         self._origin_line_length = 20
         self._origin_line_width = 0.5
 
-        self._plate_mesh = None
         self._grid_mesh = None
-        self._plate_shader = None
+        self._grid_shader = None
 
         self._disallowed_areas = []
         self._disallowed_area_mesh = None
@@ -96,14 +92,14 @@ class BuildVolume(SceneNode):
         self._scene_change_timer.timeout.connect(self._onSceneChangeTimerFinished)
 
         self._setting_change_timer = QTimer()
-        self._setting_change_timer.setInterval(100)
+        self._setting_change_timer.setInterval(150)
         self._setting_change_timer.setSingleShot(True)
         self._setting_change_timer.timeout.connect(self._onSettingChangeTimerFinished)
 
         self._build_volume_message = Message(catalog.i18nc("@info:status",
             "The build volume height has been reduced due to the value of the"
             " \"Print Sequence\" setting to prevent the gantry from colliding"
-            " with printed models."))
+            " with printed models."), title = catalog.i18nc("@info:title","Build Volume"))
 
         # Must be after setting _build_volume_message, apparently that is used in getMachineManager.
         # activeQualityChanged is always emitted after setActiveVariant, setActiveMaterial and setActiveQuality.
@@ -180,15 +176,15 @@ class BuildVolume(SceneNode):
 
         if not self._shader:
             self._shader = OpenGL.getInstance().createShaderProgram(Resources.getPath(Resources.Shaders, "default.shader"))
-            self._plate_shader = OpenGL.getInstance().createShaderProgram(Resources.getPath(Resources.Shaders, "color.shader"))
+            self._grid_shader = OpenGL.getInstance().createShaderProgram(Resources.getPath(Resources.Shaders, "grid.shader"))
             theme = Application.getInstance().getTheme()
-            self._plate_shader.setUniformValue("u_color", Color(*theme.getColor("buildplate").getRgb()))
-            self._plate_shader.setUniformValue("u_z_bias", 0.000001)
+            self._grid_shader.setUniformValue("u_plateColor", Color(*theme.getColor("buildplate").getRgb()))
+            self._grid_shader.setUniformValue("u_gridColor0", Color(*theme.getColor("buildplate_grid").getRgb()))
+            self._grid_shader.setUniformValue("u_gridColor1", Color(*theme.getColor("buildplate_grid_minor").getRgb()))
 
         renderer.queueNode(self, mode = RenderBatch.RenderMode.Lines)
         renderer.queueNode(self, mesh = self._origin_mesh)
-        renderer.queueNode(self, mesh = self._plate_mesh, shader = self._plate_shader, backface_cull = True)
-        renderer.queueNode(self, mesh = self._grid_mesh, mode = RenderBatch.RenderMode.Lines, transparent = True)
+        renderer.queueNode(self, mesh = self._grid_mesh, shader = self._grid_shader, backface_cull = True)
         if self._disallowed_area_mesh:
             renderer.queueNode(self, mesh = self._disallowed_area_mesh, shader = self._shader, transparent = True, backface_cull = True, sort = -9)
 
@@ -261,8 +257,6 @@ class BuildVolume(SceneNode):
             self._z_axis_color = Color(*theme.getColor("z_axis").getRgb())
             self._disallowed_area_color = Color(*theme.getColor("disallowed_area").getRgb())
             self._error_area_color = Color(*theme.getColor("error_area").getRgb())
-            self._grid_color = Color(*theme.getColor("buildplate_grid").getRgb())
-            self._grid_minor_color = Color(*theme.getColor("buildplate_grid_minor").getRgb())
 
         min_w = -self._width / 2
         max_w = self._width / 2
@@ -293,7 +287,7 @@ class BuildVolume(SceneNode):
 
             self.setMeshData(mb.build())
 
-            # Build plate surface.
+            # Build plate grid mesh
             mb = MeshBuilder()
             mb.addQuad(
                 Vector(min_w, min_h - z_fight_distance, min_d),
@@ -305,30 +299,6 @@ class BuildVolume(SceneNode):
             for n in range(0, 6):
                 v = mb.getVertex(n)
                 mb.setVertexUVCoordinates(n, v[0], v[2])
-            self._plate_mesh = mb.build()
-
-            #Build plate grid mesh.
-            mb = MeshBuilder()
-            for x in range(0, int(math.ceil(max_w)), MAJOR_GRID_SIZE):
-                mb.addLine(Vector(x, min_h, min_d), Vector(x, min_h, max_d), color = self._grid_color)
-                #Start from 0 in both cases, so you need to do this in two for loops.
-                mb.addLine(Vector(-x, min_h, min_d), Vector(-x, min_h, max_d), color = self._grid_color)
-            for y in range(0, int(math.ceil(max_d)), MAJOR_GRID_SIZE):
-                mb.addLine(Vector(min_w, min_h, y), Vector(max_w, min_h, y), color = self._grid_color)
-                mb.addLine(Vector(min_w, min_h, -y), Vector(max_w, min_h, -y), color = self._grid_color)
-
-            #More fine grained grid.
-            for x in range(0, int(math.ceil(max_w)), MINOR_GRID_SIZE):
-                if x % MAJOR_GRID_SIZE == 0: #Don't overlap with the major grid.
-                    pass
-                mb.addLine(Vector(x, min_h, min_d), Vector(x, min_h, max_d), color = self._grid_minor_color)
-                mb.addLine(Vector(-x, min_h, min_d), Vector(-x, min_h, max_d), color = self._grid_minor_color)
-            for y in range(0, int(math.ceil(max_d)), MINOR_GRID_SIZE):
-                if y % MAJOR_GRID_SIZE == 0:
-                    pass
-                mb.addLine(Vector(min_w, min_h, y), Vector(max_w, min_h, y), color = self._grid_minor_color)
-                mb.addLine(Vector(min_w, min_h, -y), Vector(max_w, min_h, -y), color = self._grid_minor_color)
-
             self._grid_mesh = mb.build()
 
         else:
@@ -344,7 +314,7 @@ class BuildVolume(SceneNode):
             mb.addArc(max_w, Vector.Unit_Y, center = (0, max_h, 0),  color = self._volume_outline_color)
             self.setMeshData(mb.build().getTransformed(scale_matrix))
 
-            # Build plate surface.
+            # Build plate grid mesh
             mb = MeshBuilder()
             mb.addVertex(0, min_h - z_fight_distance, 0)
             mb.addArc(max_w, Vector.Unit_Y, center = Vector(0, min_h - z_fight_distance, 0))
@@ -358,40 +328,7 @@ class BuildVolume(SceneNode):
             for n in range(0, mb.getVertexCount()):
                 v = mb.getVertex(n)
                 mb.setVertexUVCoordinates(n, v[0], v[2] * aspect)
-            self._plate_mesh = mb.build().getTransformed(scale_matrix)
-
-            #Build plate grid mesh.
-            #We need to constrain the length of the lines to the build plate ellipsis. Time to get out the calculator!
-            mb = MeshBuilder()
-            for x in range(0, int(math.ceil(max_w)), MAJOR_GRID_SIZE):
-                #x / max_w is the fraction along the build plate we have progressed, counting from the centre.
-                #So x / max_w is sin(a), where a is the angle towards an endpoint of the grid line from the centre.
-                #So math.asin(x / max_w) is a.
-                #So math.cos(math.asin(x / max_w)) is half of the length of the grid line on a unit circle, which scales between 0 and 1.
-                length_factor = math.cos(math.asin(x / max_w))
-                mb.addLine(Vector(x, min_h, min_d * length_factor), Vector(x, min_h, max_d * length_factor), color = self._grid_color)
-                #Start from 0 in both cases, so you need to do this in two for loops.
-                mb.addLine(Vector(-x, min_h, min_d * length_factor), Vector(-x, min_h, max_d * length_factor), color = self._grid_color)
-            for y in range(0, int(math.ceil(max_d)), MAJOR_GRID_SIZE):
-                length_factor = math.sin(math.acos(y / max_d))
-                mb.addLine(Vector(min_w * length_factor, min_h, y), Vector(max_w * length_factor, min_h, y), color = self._grid_color)
-                mb.addLine(Vector(min_w * length_factor, min_h, -y), Vector(max_w * length_factor, min_h, -y), color = self._grid_color)
-
-            #More fine grained grid.
-            for x in range(0, int(math.ceil(max_w)), MINOR_GRID_SIZE):
-                if x % MAJOR_GRID_SIZE == 0: #Don't overlap with the major grid.
-                    pass
-                length_factor = math.cos(math.asin(x / max_w))
-                mb.addLine(Vector(x, min_h, min_d * length_factor), Vector(x, min_h, max_d * length_factor), color = self._grid_minor_color)
-                mb.addLine(Vector(-x, min_h, min_d * length_factor), Vector(-x, min_h, max_d * length_factor), color = self._grid_minor_color)
-            for y in range(0, int(math.ceil(max_d)), MINOR_GRID_SIZE):
-                if y % MAJOR_GRID_SIZE == 0:
-                    pass
-                length_factor = math.sin(math.acos(y / max_d))
-                mb.addLine(Vector(min_w * length_factor, min_h, y), Vector(max_w * length_factor, min_h, y), color = self._grid_minor_color)
-                mb.addLine(Vector(min_w * length_factor, min_h, -y), Vector(max_w * length_factor, min_h, -y), color = self._grid_minor_color)
-
-            self._grid_mesh = mb.build()
+            self._grid_mesh = mb.build().getTransformed(scale_matrix)
 
         # Indication of the machine origin
         if self._global_container_stack.getProperty("machine_center_is_zero", "value"):

cura/CuraApplication.py

@@ -104,7 +104,7 @@ class CuraApplication(QtApplication):
     # SettingVersion represents the set of settings available in the machine/extruder definitions.
     # You need to make sure that this version number needs to be increased if there is any non-backwards-compatible
     # changes of the settings.
-    SettingVersion = 2
+    SettingVersion = 3
 
     class ResourceTypes:
         QmlFiles = Resources.UserType + 1
@@ -488,7 +488,7 @@ class CuraApplication(QtApplication):
             f.write(data)
 
 
-    @pyqtSlot(str, result=QUrl)
+    @pyqtSlot(str, result = QUrl)
     def getDefaultPath(self, key):
         default_path = Preferences.getInstance().getValue("local_file/%s" % key)
         return QUrl.fromLocalFile(default_path)
@@ -1128,7 +1128,7 @@ class CuraApplication(QtApplication):
 
     expandedCategoriesChanged = pyqtSignal()
 
-    @pyqtProperty("QStringList", notify=expandedCategoriesChanged)
+    @pyqtProperty("QStringList", notify = expandedCategoriesChanged)
     def expandedCategories(self):
         return Preferences.getInstance().getValue("cura/categories_expanded").split(";")
 
@@ -1182,6 +1182,7 @@ class CuraApplication(QtApplication):
         group_node = SceneNode()
         group_decorator = GroupDecorator()
         group_node.addDecorator(group_decorator)
+        group_node.addDecorator(ConvexHullDecorator())
         group_node.setParent(self.getController().getScene().getRoot())
         group_node.setSelectable(True)
         center = Selection.getSelectionCenter()
@@ -1292,7 +1293,7 @@ class CuraApplication(QtApplication):
                 message = Message(
                     self._i18n_catalog.i18nc("@info:status",
                                        "Only one G-code file can be loaded at a time. Skipped importing {0}",
-                                       filename))
+                                       filename), title = self._i18n_catalog.i18nc("@info:title", "Warning"))
                 message.show()
                 return
             # If file being loaded is non-slicable file, then prevent loading of any other files
@@ -1301,7 +1302,7 @@ class CuraApplication(QtApplication):
                 message = Message(
                     self._i18n_catalog.i18nc("@info:status",
                                        "Can't open any other file if G-code is loading. Skipped importing {0}",
-                                       filename))
+                                       filename), title = self._i18n_catalog.i18nc("@info:title", "Error"))
                 message.show()
                 return
 

cura/CuraSplashScreen.py

@@ -1,38 +1,117 @@
-# Copyright (c) 2015 Ultimaker B.V.
+# Copyright (c) 2017 Ultimaker B.V.
 # Uranium is released under the terms of the AGPLv3 or higher.
 
+from threading import Thread, Event
+import time
+
 from PyQt5.QtCore import Qt, QCoreApplication
-from PyQt5.QtGui import QPixmap, QColor, QFont, QFontMetrics
+from PyQt5.QtGui import QPixmap, QColor, QFont, QFontMetrics, QImage, QPen
 from PyQt5.QtWidgets import QSplashScreen
 
 from UM.Resources import Resources
 from UM.Application import Application
 
+
 class CuraSplashScreen(QSplashScreen):
     def __init__(self):
         super().__init__()
-        self._scale = round(QFontMetrics(QCoreApplication.instance().font()).ascent() / 12)
+        self._scale = 0.7
 
         splash_image = QPixmap(Resources.getPath(Resources.Images, "cura.png"))
-        self.setPixmap(splash_image.scaled(splash_image.size() * self._scale))
+        self.setPixmap(splash_image)
+
+        self._current_message = ""
+
+        self._loading_image = QImage(Resources.getPath(Resources.Images, "loading.png"))
+        self._loading_image = self._loading_image.scaled(30, 30, Qt.KeepAspectRatio)
+        self._loading_image_rotation_angle = 0
+
+        self._to_stop = False
+        self._loading_tick_thread = LoadingTickThread(self)
+
+    def show(self):
+        super().show()
+        self._loading_tick_thread.start()
+
+    def updateLoadingImage(self):
+        if self._to_stop:
+            return
+
+        self._loading_image_rotation_angle -= 10
+        self.repaint()
 
     def drawContents(self, painter):
+        if self._to_stop:
+            return
+
         painter.save()
-        painter.setPen(QColor(0, 0, 0, 255))
+        painter.setPen(QColor(255, 255, 255, 255))
 
         version = Application.getInstance().getVersion().split("-")
         buildtype = Application.getInstance().getBuildType()
         if buildtype:
-            version[0] += " (%s)" %(buildtype)
+            version[0] += " (%s)" % buildtype
 
-        font = QFont() # Using system-default font here
-        font.setPointSize(20)
+        # draw version text
+        font = QFont()  # Using system-default font here
+        font.setPointSize(34)
         painter.setFont(font)
-        painter.drawText(0, 0, 330 * self._scale, 230 * self._scale, Qt.AlignHCenter | Qt.AlignBottom, version[0])
+        painter.drawText(275, 87, 330 * self._scale, 230 * self._scale, Qt.AlignLeft | Qt.AlignBottom, version[0])
         if len(version) > 1:
             font.setPointSize(12)
             painter.setFont(font)
-            painter.drawText(0, 0, 330 * self._scale, 255 * self._scale, Qt.AlignHCenter | Qt.AlignBottom, version[1])
+            painter.drawText(320, 82, 330 * self._scale, 255 * self._scale, Qt.AlignLeft | Qt.AlignBottom, version[1])
+
+        # draw the loading image
+        pen = QPen()
+        pen.setWidth(4 * self._scale)
+        pen.setColor(QColor(255, 255, 255, 255))
+        painter.setPen(pen)
+        painter.drawArc(130, 380, 32 * self._scale, 32 * self._scale, self._loading_image_rotation_angle * 16, 300 * 16)
+
+        # draw message text
+        if self._current_message:
+            font = QFont()  # Using system-default font here
+            font.setPointSize(16)
+            painter.setFont(font)
+            painter.drawText(180, 243, 330 * self._scale, 230 * self._scale, Qt.AlignLeft | Qt.AlignBottom,
+                             self._current_message)
 
         painter.restore()
         super().drawContents(painter)
+
+    def showMessage(self, message, *args, **kwargs):
+        if self._to_stop:
+            return
+
+        self._current_message = message
+        self.messageChanged.emit(message)
+        self.repaint()
+
+    def close(self):
+        # set stop flags
+        self._to_stop = True
+        self._loading_tick_thread.setToStop()
+        super().close()
+
+
+class LoadingTickThread(Thread):
+
+    def __init__(self, splash):
+        super().__init__(daemon = True)
+        self._splash = splash
+        self._to_stop = False
+        self._time_interval = 0.05
+        self._event = Event()
+
+    def setToStop(self):
+        self._to_stop = True
+        self._event.set()
+
+    def run(self):
+        while not self._to_stop:
+            self._event.wait(self._time_interval)
+            if self._event.is_set():
+                break
+
+            self._splash.updateLoadingImage()

cura/MultiplyObjectsJob.py

@@ -32,7 +32,7 @@ class MultiplyObjectsJob(Job):
 
     def run(self):
         status_message = Message(i18n_catalog.i18nc("@info:status", "Multiplying and placing objects"), lifetime=0,
-                                 dismissable=False, progress=0)
+                                 dismissable=False, progress=0, title = i18n_catalog.i18nc("@info:title", "Placing Object"))
         status_message.show()
         scene = Application.getInstance().getController().getScene()
 
@@ -80,5 +80,5 @@ class MultiplyObjectsJob(Job):
         status_message.hide()
 
         if not found_solution_for_all:
-            no_full_solution_message = Message(i18n_catalog.i18nc("@info:status", "Unable to find a location within the build volume for all objects"))
+            no_full_solution_message = Message(i18n_catalog.i18nc("@info:status", "Unable to find a location within the build volume for all objects"), title = i18n_catalog.i18nc("@info:title", "Placing Object"))
             no_full_solution_message.show()

cura/PrintInformation.py

@@ -80,7 +80,7 @@ class PrintInformation(QObject):
         self._abbr_machine = ""
         self._job_name = ""
 
-        Application.getInstance().globalContainerStackChanged.connect(self._setAbbreviatedMachineName)
+        Application.getInstance().globalContainerStackChanged.connect(self._updateJobName)
         Application.getInstance().fileLoaded.connect(self.setBaseName)
 
         Preferences.getInstance().preferenceChanged.connect(self._onPreferencesChanged)

cura/Settings/CuraContainerRegistry.py

@@ -140,15 +140,20 @@ class CuraContainerRegistry(ContainerRegistry):
             success = profile_writer.write(file_name, found_containers)
         except Exception as e:
             Logger.log("e", "Failed to export profile to %s: %s", file_name, str(e))
-            m = Message(catalog.i18nc("@info:status Don't translate the XML tags <filename> or <message>!", "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>", file_name, str(e)), lifetime = 0)
+            m = Message(catalog.i18nc("@info:status Don't translate the XML tags <filename> or <message>!", "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>", file_name, str(e)),
+                        lifetime = 0,
+                        title = catalog.i18nc("@info:title", "Error"))
             m.show()
             return
         if not success:
             Logger.log("w", "Failed to export profile to %s: Writer plugin reported failure.", file_name)
-            m = Message(catalog.i18nc("@info:status Don't translate the XML tag <filename>!", "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure.", file_name), lifetime = 0)
+            m = Message(catalog.i18nc("@info:status Don't translate the XML tag <filename>!", "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure.", file_name),
+                        lifetime = 0,
+                        title = catalog.i18nc("@info:title", "Error"))
             m.show()
             return
-        m = Message(catalog.i18nc("@info:status Don't translate the XML tag <filename>!", "Exported profile to <filename>{0}</filename>", file_name))
+        m = Message(catalog.i18nc("@info:status Don't translate the XML tag <filename>!", "Exported profile to <filename>{0}</filename>", file_name),
+                    title = catalog.i18nc("@info:title", "Export Details"))
         m.show()
 
     ##  Gets the plugin object matching the criteria

cura/Settings/MachineManager.py

@@ -105,7 +105,8 @@ class MachineManager(QObject):
         self._auto_hotends_changed = {}
 
         self._material_incompatible_message = Message(catalog.i18nc("@info:status",
-                                              "The selected material is incompatible with the selected machine or configuration."))
+                                              "The selected material is incompatible with the selected machine or configuration."),
+                                                title = catalog.i18nc("@info:title", "Incompatible Material"))
 
     globalContainerChanged = pyqtSignal() # Emitted whenever the global stack is changed (ie: when changing between printers, changing a global profile, but not when changing a value)
     activeMaterialChanged = pyqtSignal()

cura/Settings/MaterialManager.py

@@ -21,7 +21,7 @@ class MaterialManager(QObject):
 
         #Material diameter changed warning message.
         self._material_diameter_warning_message = Message(catalog.i18nc("@info:status Has a cancel button next to it.",
-            "The selected material diameter causes the material to become incompatible with the current printer."))
+            "The selected material diameter causes the material to become incompatible with the current printer."), title = catalog.i18nc("@info:title", "Incompatible Material"))
         self._material_diameter_warning_message.addAction("Undo", catalog.i18nc("@action:button", "Undo"), None, catalog.i18nc("@action", "Undo changing the material diameter."))
         self._material_diameter_warning_message.actionTriggered.connect(self._materialWarningMessageAction)
 

plugins/CuraEngineBackend/CuraEngineBackend.py

@@ -278,7 +278,7 @@ class CuraEngineBackend(QObject, Backend):
         if job.getResult() == StartSliceJob.StartJobResult.MaterialIncompatible:
             if Application.getInstance().platformActivity:
                 self._error_message = Message(catalog.i18nc("@info:status",
-                                            "The selected material is incompatible with the selected machine or configuration."))
+                                            "The selected material is incompatible with the selected machine or configuration."), title = catalog.i18nc("@info:title", "Material Details"))
                 self._error_message.show()
                 self.backendStateChange.emit(BackendState.Error)
             else:
@@ -305,7 +305,8 @@ class CuraEngineBackend(QObject, Backend):
                     error_labels.add(definitions[0].label)
 
                 error_labels = ", ".join(error_labels)
-                self._error_message = Message(catalog.i18nc("@info:status", "Unable to slice with the current settings. The following settings have errors: {0}".format(error_labels)))
+                self._error_message = Message(catalog.i18nc("@info:status", "Unable to slice with the current settings. The following settings have errors: {0}".format(error_labels)),
+                                              title = catalog.i18nc("@info:title", "Setting Details"))
                 self._error_message.show()
                 self.backendStateChange.emit(BackendState.Error)
             else:
@@ -314,7 +315,8 @@ class CuraEngineBackend(QObject, Backend):
 
         if job.getResult() == StartSliceJob.StartJobResult.BuildPlateError:
             if Application.getInstance().platformActivity:
-                self._error_message = Message(catalog.i18nc("@info:status", "Unable to slice because the prime tower or prime position(s) are invalid."))
+                self._error_message = Message(catalog.i18nc("@info:status", "Unable to slice because the prime tower or prime position(s) are invalid."),
+                                              title = catalog.i18nc("@info:title", "Invalid position"))
                 self._error_message.show()
                 self.backendStateChange.emit(BackendState.Error)
             else:
@@ -322,7 +324,8 @@ class CuraEngineBackend(QObject, Backend):
 
         if job.getResult() == StartSliceJob.StartJobResult.NothingToSlice:
             if Application.getInstance().platformActivity:
-                self._error_message = Message(catalog.i18nc("@info:status", "Nothing to slice because none of the models fit the build volume. Please scale or rotate models to fit."))
+                self._error_message = Message(catalog.i18nc("@info:status", "Nothing to slice because none of the models fit the build volume. Please scale or rotate models to fit."),
+                                              title = catalog.i18nc("@info:title", "Warning"))
                 self._error_message.show()
                 self.backendStateChange.emit(BackendState.Error)
             else:

plugins/CuraEngineBackend/ProcessSlicedLayersJob.py

@@ -235,7 +235,7 @@ class ProcessSlicedLayersJob(Job):
         if self.isRunning():
             if Application.getInstance().getController().getActiveView().getPluginId() == "LayerView":
                 if not self._progress:
-                    self._progress = Message(catalog.i18nc("@info:status", "Processing Layers"), 0, False, 0)
+                    self._progress = Message(catalog.i18nc("@info:status", "Processing Layers"), 0, False, 0, catalog.i18nc("@info:title", "Information"))
                 if self._progress.getProgress() != 100:
                     self._progress.show()
             else:

plugins/CuraEngineBackend/StartSliceJob.py

@@ -319,18 +319,22 @@ class StartSliceJob(Job):
     #   \param message object_lists message to put the per object settings in
     def _handlePerObjectSettings(self, node, message):
         stack = node.callDecoration("getStack")
-        if not stack: # Check if the node has a stack attached to it and the stack has any settings in the top container.
+
+        # Check if the node has a stack attached to it and the stack has any settings in the top container.
+        if not stack:
             return
 
         # Check all settings for relations, so we can also calculate the correct values for dependent settings.
-        top_of_stack = stack.getTop() #Cache for efficiency.
+        top_of_stack = stack.getTop()  # Cache for efficiency.
         changed_setting_keys = set(top_of_stack.getAllKeys())
+
+        # Add all relations to changed settings as well.
         for key in top_of_stack.getAllKeys():
             instance = top_of_stack.getInstance(key)
             self._addRelations(changed_setting_keys, instance.definition.relations)
             Job.yieldThread()
 
-        # Ensure that the engine is aware what the build extruder is
+        # Ensure that the engine is aware what the build extruder is.
         if stack.getProperty("machine_extruder_count", "value") > 1:
             changed_setting_keys.add("extruder_nr")
 
@@ -339,14 +343,18 @@ class StartSliceJob(Job):
             setting = message.addRepeatedMessage("settings")
             setting.name = key
             extruder = int(round(float(stack.getProperty(key, "limit_to_extruder"))))
-            if extruder >= 0 and key not in top_of_stack.getAllKeys(): #Limited to a specific extruder, but not overridden by per-object settings.
+
+            # Check if limited to a specific extruder, but not overridden by per-object settings.
+            if extruder >= 0 and key not in changed_setting_keys:
                 limited_stack = ExtruderManager.getInstance().getActiveExtruderStacks()[extruder]
             else:
-                limited_stack = stack #Just take from the per-object settings itself.
+                limited_stack = stack
+
             setting.value = str(limited_stack.getProperty(key, "value")).encode("utf-8")
+
             Job.yieldThread()
 
-    ##  Recursive function to put all settings that require eachother for value changes in a list
+    ##  Recursive function to put all settings that require each other for value changes in a list
     #   \param relations_set \type{set} Set of keys (strings) of settings that are influenced
     #   \param relations list of relation objects that need to be checked.
     def _addRelations(self, relations_set, relations):

plugins/GCodeReader/GCodeReader.py

@@ -251,7 +251,10 @@ class GCodeReader(MeshReader):
 
             self._clearValues()
 
-            self._message = Message(catalog.i18nc("@info:status", "Parsing G-code"), lifetime=0)
+            self._message = Message(catalog.i18nc("@info:status", "Parsing G-code"),
+                                    lifetime=0,
+                                    title = catalog.i18nc("@info:title", "G-code Details"))
+
             self._message.setProgress(0)
             self._message.show()
 
@@ -362,7 +365,9 @@ class GCodeReader(MeshReader):
         if Preferences.getInstance().getValue("gcodereader/show_caution"):
             caution_message = Message(catalog.i18nc(
                 "@info:generic",
-                "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."), lifetime=0)
+                "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."),
+                lifetime=0,
+                title = catalog.i18nc("@info:title", "G-code Details"))
             caution_message.show()
 
         # The "save/print" button's state is bound to the backend state.

plugins/LayerView/LayerView.py

@@ -90,7 +90,8 @@ class LayerView(View):
         self._only_show_top_layers = bool(Preferences.getInstance().getValue("view/only_show_top_layers"))
         self._compatibility_mode = True  # for safety
 
-        self._wireprint_warning_message = Message(catalog.i18nc("@info:status", "Cura does not accurately display layers when Wire Printing is enabled"))
+        self._wireprint_warning_message = Message(catalog.i18nc("@info:status", "Cura does not accurately display layers when Wire Printing is enabled"),
+                                                  title = catalog.i18nc("@info:title", "Layer View"))
 
     def _resetSettings(self):
         self._layer_view_type = 0  # 0 is material color, 1 is color by linetype, 2 is speed

plugins/LayerView/LayerView.qml

@@ -22,18 +22,23 @@ Item
     height: {
         if (UM.LayerView.compatibilityMode) {
             return UM.Theme.getSize("layerview_menu_size_compatibility").height;
+        } else if (UM.Preferences.getValue("layerview/layer_view_type") == 0) {
+            return UM.Theme.getSize("layerview_menu_size_material_color_mode").height + UM.LayerView.extruderCount * (UM.Theme.getSize("layerview_row").height + UM.Theme.getSize("layerview_row_spacing").height)
         } else {
             return UM.Theme.getSize("layerview_menu_size").height + UM.LayerView.extruderCount * (UM.Theme.getSize("layerview_row").height + UM.Theme.getSize("layerview_row_spacing").height)
         }
     }
+
     property var buttonTarget: {
         var force_binding = parent.y; // ensure this gets reevaluated when the panel moves
         return base.mapFromItem(parent.parent, parent.buttonTarget.x, parent.buttonTarget.y);
     }
 
+    visible: !parent.parent.monitoringPrint
+
     UM.PointingRectangle {
         id: layerViewMenu
-        anchors.left: parent.left
+        anchors.right: parent.right
         anchors.top: parent.top
         width: parent.width
         height: parent.height
@@ -41,9 +46,7 @@ Item
         color: UM.Theme.getColor("tool_panel_background")
         borderWidth: UM.Theme.getSize("default_lining").width
         borderColor: UM.Theme.getColor("lining")
-
-        target: parent.buttonTarget
-        arrowSize: UM.Theme.getSize("default_arrow").width
+        arrowSize: 0 // hide arrow until weird issue with first time rendering is fixed
 
         ColumnLayout {
             id: view_settings
@@ -64,26 +67,7 @@ Item
             anchors.leftMargin: UM.Theme.getSize("default_margin").width
             spacing: UM.Theme.getSize("layerview_row_spacing").height
             anchors.right: parent.right
-            anchors.rightMargin: UM.Theme.getSize("default_margin").width * 2
-
-            Label
-            {
-                id: layersLabel
-                anchors.left: parent.left
-                text: catalog.i18nc("@label","View Mode: Layers")
-                font: UM.Theme.getFont("default_bold");
-                color: UM.Theme.getColor("setting_control_text")
-                Layout.fillWidth: true
-                elide: Text.ElideMiddle;
-            }
-
-            Label
-            {
-                id: spaceLabel
-                anchors.left: parent.left
-                text: " "
-                font.pointSize: 0.5
-            }
+            anchors.rightMargin: UM.Theme.getSize("default_margin").width
 
             Label
             {
@@ -199,6 +183,7 @@ Item
                         width: UM.Theme.getSize("layerview_legend_size").width
                         height: UM.Theme.getSize("layerview_legend_size").height
                         color: model.color
+                        radius: width / 2
                         border.width: UM.Theme.getSize("default_lining").width
                         border.color: UM.Theme.getColor("lining")
                         visible: !view_settings.show_legend
@@ -211,7 +196,7 @@ Item
                     {
                         text: model.name
                         elide: Text.ElideRight
-                        color: UM.Theme.getColor("button_text")
+                        color: UM.Theme.getColor("setting_control_text")
                         font: UM.Theme.getFont("default")
                         anchors.verticalCenter: parent.verticalCenter
                         anchors.left: extrudersModelCheckBox.left;
@@ -280,7 +265,7 @@ Item
                         text: label
                         font: UM.Theme.getFont("default")
                         elide: Text.ElideRight
-                        color: UM.Theme.getColor("button_text")
+                        color: UM.Theme.getColor("setting_control_text")
                         anchors.verticalCenter: parent.verticalCenter
                         anchors.left: legendModelCheckBox.left;
                         anchors.right: legendModelCheckBox.right;
@@ -343,7 +328,7 @@ Item
                     Layout.fillWidth: true
                     Layout.preferredHeight: UM.Theme.getSize("layerview_row").height + UM.Theme.getSize("default_lining").height
                     Layout.preferredWidth: UM.Theme.getSize("layerview_row").width
-                    color: UM.Theme.getColor("button_text")
+                    color: UM.Theme.getColor("setting_control_text")
                     font: UM.Theme.getFont("default")
                 }
             }
@@ -354,7 +339,7 @@ Item
             id: slider
             width: handleSize
             height: parent.height - 2*UM.Theme.getSize("slider_layerview_margin").height
-            anchors.top: parent.top
+            anchors.top: parent.bottom
             anchors.topMargin: UM.Theme.getSize("slider_layerview_margin").height
             anchors.right: layerViewMenu.right
             anchors.rightMargin: UM.Theme.getSize("slider_layerview_margin").width
@@ -364,7 +349,7 @@ Item
             property real minimumRangeHandleSize: UM.Theme.getSize("slider_handle").width / 2
             property real trackThickness: UM.Theme.getSize("slider_groove").width
             property real trackRadius: trackThickness / 2
-            property real trackBorderWidth: UM.Theme.getSize("default_lining").width
+            property real trackBorderWidth: UM.Theme.getSize("default_lining").width / 2
             property color upperHandleColor: UM.Theme.getColor("slider_handle")
             property color lowerHandleColor: UM.Theme.getColor("slider_handle")
             property color rangeHandleColor: UM.Theme.getColor("slider_groove_fill")
@@ -434,6 +419,7 @@ Item
                 color: parent.trackColor
                 border.width: parent.trackBorderWidth;
                 border.color: parent.trackBorderColor;
+                visible: slider.layersVisible
             }
 
             Item {
@@ -492,8 +478,8 @@ Item
                 anchors.horizontalCenter: parent.horizontalCenter
                 radius: parent.handleRadius
                 color: parent.upperHandleColor
-                border.width: UM.Theme.getSize("default_lining").width
-                border.color: UM.Theme.getColor("slider_handle_border")
+                //border.width: UM.Theme.getSize("default_lining").width
+                //border.color: UM.Theme.getColor("slider_handle_border")
 
                 visible: slider.layersVisible
 
@@ -568,10 +554,10 @@ Item
 
             UM.PointingRectangle
             {
-                x: parent.width + UM.Theme.getSize("slider_layerview_background").width / 2;
+                x: parent.width - UM.Theme.getSize("slider_layerview_background").width / 2 - width;
                 y: Math.floor(slider.activeHandle.y + slider.activeHandle.height / 2 - height / 2);
 
-                target: Qt.point(0, slider.activeHandle.y + slider.activeHandle.height / 2)
+                target: Qt.point(parent.width, slider.activeHandle.y + slider.activeHandle.height / 2)
                 arrowSize: UM.Theme.getSize("default_arrow").width
 
                 height: UM.Theme.getSize("slider_handle").height + UM.Theme.getSize("default_margin").height

plugins/LayerView/__init__.py

@@ -10,7 +10,7 @@ catalog = i18nCatalog("cura")
 def getMetaData():
     return {
         "view": {
-            "name": catalog.i18nc("@item:inlistbox", "Layers"),
+            "name": catalog.i18nc("@item:inlistbox", "Layer view"),
             "view_panel": "LayerView.qml",
             "weight": 2
         }

plugins/PluginBrowser/PluginBrowser.py

@@ -161,7 +161,8 @@ class PluginBrowser(QObject, Extension):
 
             if plugin_id is None:
                 msg = i18n_catalog.i18nc("@info:status", "Failed to get plugin ID from <filename>{0}</filename>", file_path)
-                self._progress_message = Message(msg, lifetime=0, dismissable=False)
+                msg_title = i18n_catalog.i18nc("@info:tile", "Warning")
+                self._progress_message = Message(msg, lifetime=0, dismissable=False, title = msg_title)
                 return
 
             # find a potential license file

plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py

@@ -86,7 +86,7 @@ class RemovableDriveOutputDevice(OutputDevice):
             job.progress.connect(self._onProgress)
             job.finished.connect(self._onFinished)
 
-            message = Message(catalog.i18nc("@info:progress Don't translate the XML tags <filename>!", "Saving to Removable Drive <filename>{0}</filename>").format(self.getName()), 0, False, -1)
+            message = Message(catalog.i18nc("@info:progress Don't translate the XML tags <filename>!", "Saving to Removable Drive <filename>{0}</filename>").format(self.getName()), 0, False, -1, catalog.i18nc("@info:title", "Saving"))
             message.show()
 
             self.writeStarted.emit(self)
@@ -128,9 +128,8 @@ class RemovableDriveOutputDevice(OutputDevice):
                 self._stream = None
             except:
                 Logger.logException("w", "An execption occured while trying to write to removable drive.")
-                message = Message(catalog.i18nc("@info:status", "Could not save to removable drive {0}: {1}").format(self.getName(),
-                                                                                                       str(
-                                                                                                           job.getError())))
+                message = Message(catalog.i18nc("@info:status", "Could not save to removable drive {0}: {1}").format(self.getName(),str(job.getError())),
+                                  title = catalog.i18nc("@info:title", "Error"))
                 message.show()
                 self.writeError.emit(self)
                 return
@@ -138,13 +137,13 @@ class RemovableDriveOutputDevice(OutputDevice):
         self._writing = False
         self.writeFinished.emit(self)
         if job.getResult():
-            message = Message(catalog.i18nc("@info:status", "Saved to Removable Drive {0} as {1}").format(self.getName(), os.path.basename(job.getFileName())))
+            message = Message(catalog.i18nc("@info:status", "Saved to Removable Drive {0} as {1}").format(self.getName(), os.path.basename(job.getFileName())), title = catalog.i18nc("@info:title", "File Saved"))
             message.addAction("eject", catalog.i18nc("@action:button", "Eject"), "eject", catalog.i18nc("@action", "Eject removable device {0}").format(self.getName()))
             message.actionTriggered.connect(self._onActionTriggered)
             message.show()
             self.writeSuccess.emit(self)
         else:
-            message = Message(catalog.i18nc("@info:status", "Could not save to removable drive {0}: {1}").format(self.getName(), str(job.getError())))
+            message = Message(catalog.i18nc("@info:status", "Could not save to removable drive {0}: {1}").format(self.getName(), str(job.getError())), title = catalog.i18nc("@info:title", "Warning"))
             message.show()
             self.writeError.emit(self)
         job.getStream().close()
@@ -154,7 +153,7 @@ class RemovableDriveOutputDevice(OutputDevice):
             if Application.getInstance().getOutputDeviceManager().getOutputDevicePlugin("RemovableDriveOutputDevice").ejectDevice(self):
                 message.hide()
 
-                eject_message = Message(catalog.i18nc("@info:status", "Ejected {0}. You can now safely remove the drive.").format(self.getName()))
+                eject_message = Message(catalog.i18nc("@info:status", "Ejected {0}. You can now safely remove the drive.").format(self.getName()), title = catalog.i18nc("@info:title", "Safely Remove Hardware"))
             else:
-                eject_message = Message(catalog.i18nc("@info:status", "Failed to eject {0}. Another program may be using the drive.").format(self.getName()))
+                eject_message = Message(catalog.i18nc("@info:status", "Failed to eject {0}. Another program may be using the drive.").format(self.getName()), title = catalog.i18nc("@info:title", "Warning"))
             eject_message.show()

plugins/SliceInfoPlugin/SliceInfo.py

@@ -40,7 +40,11 @@ class SliceInfo(Extension):
         Preferences.getInstance().addPreference("info/asked_send_slice_info", False)
 
         if not Preferences.getInstance().getValue("info/asked_send_slice_info"):
-            self.send_slice_info_message = Message(catalog.i18nc("@info", "Cura collects anonymised slicing statistics. You can disable this in the preferences."), lifetime = 0, dismissable = False)
+            self.send_slice_info_message = Message(catalog.i18nc("@info", "Cura collects anonymised slicing statistics. You can disable this in the preferences."),
+                                                   lifetime = 0,
+                                                   dismissable = False,
+                                                   title = catalog.i18nc("@info:title", "Collecting Data"))
+
             self.send_slice_info_message.addAction("Dismiss", catalog.i18nc("@action:button", "Dismiss"), None, "")
             self.send_slice_info_message.actionTriggered.connect(self.messageActionTriggered)
             self.send_slice_info_message.show()

plugins/SolidView/__init__.py

@@ -9,7 +9,7 @@ i18n_catalog = i18nCatalog("cura")
 def getMetaData():
     return {
         "view": {
-            "name": i18n_catalog.i18nc("@item:inmenu", "Solid"),
+            "name": i18n_catalog.i18nc("@item:inmenu", "Solid view"),
             "weight": 0
         }
     }

plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py

@@ -154,12 +154,12 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
         self._authentication_id = None
         self._authentication_key = None
 
-        self._authentication_requested_message = Message(i18n_catalog.i18nc("@info:status", "Access to the printer requested. Please approve the request on the printer"), lifetime = 0, dismissable = False, progress = 0)
-        self._authentication_failed_message = Message(i18n_catalog.i18nc("@info:status", ""))
+        self._authentication_requested_message = Message(i18n_catalog.i18nc("@info:status", "Access to the printer requested. Please approve the request on the printer"), lifetime = 0, dismissable = False, progress = 0, title = i18n_catalog.i18nc("@info:title", "Connection status"))
+        self._authentication_failed_message = Message(i18n_catalog.i18nc("@info:status", ""), title = i18n_catalog.i18nc("@info:title", "Connection Status"))
         self._authentication_failed_message.addAction("Retry", i18n_catalog.i18nc("@action:button", "Retry"), None, i18n_catalog.i18nc("@info:tooltip", "Re-send the access request"))
         self._authentication_failed_message.actionTriggered.connect(self.requestAuthentication)
-        self._authentication_succeeded_message = Message(i18n_catalog.i18nc("@info:status", "Access to the printer accepted"))
-        self._not_authenticated_message = Message(i18n_catalog.i18nc("@info:status", "No access to print with this printer. Unable to send print job."))
+        self._authentication_succeeded_message = Message(i18n_catalog.i18nc("@info:status", "Access to the printer accepted"), title = i18n_catalog.i18nc("@info:title", "Connection Status"))
+        self._not_authenticated_message = Message(i18n_catalog.i18nc("@info:status", "No access to print with this printer. Unable to send print job."), title = i18n_catalog.i18nc("@info:title", "Connection Status"))
         self._not_authenticated_message.addAction("Request", i18n_catalog.i18nc("@action:button", "Request Access"), None, i18n_catalog.i18nc("@info:tooltip", "Send access request to the printer"))
         self._not_authenticated_message.actionTriggered.connect(self.requestAuthentication)
 
@@ -464,7 +464,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                 self._connection_state_before_timeout = self._connection_state
                 self.setConnectionState(ConnectionState.error)
                 self._connection_message = Message(i18n_catalog.i18nc("@info:status",
-                                                                      "The connection with the network was lost."))
+                                                                      "The connection with the network was lost."),
+                                                   title = i18n_catalog.i18nc("@info:title", "Connection Status"))
                 self._connection_message.show()
 
                 if self._progress_message:
@@ -495,7 +496,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                 # Go into timeout state.
                 Logger.log("d", "We did not receive a response for %0.1f seconds, so it seems the printer is no longer accessible.", time_since_last_response)
                 self._connection_state_before_timeout = self._connection_state
-                self._connection_message = Message(i18n_catalog.i18nc("@info:status", "The connection with the printer was lost. Check your printer to see if it is connected."))
+                self._connection_message = Message(i18n_catalog.i18nc("@info:status", "The connection with the printer was lost. Check your printer to see if it is connected."),
+                                                   title = i18n_catalog.i18nc("@info:title", "Connection Status"))
                 self._connection_message.show()
 
                 if self._progress_message:
@@ -644,7 +646,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
     def requestWrite(self, nodes, file_name = None, filter_by_machine = False, file_handler = None, **kwargs):
         if self._printer_state not in ["idle", ""]:
             self._error_message = Message(
-                i18n_catalog.i18nc("@info:status", "Unable to start a new print job, printer is busy. Current printer status is %s.") % self._printer_state)
+                i18n_catalog.i18nc("@info:status", "Unable to start a new print job, printer is busy. Current printer status is %s.") % self._printer_state,
+                title = i18n_catalog.i18nc("@info:title", "Printer Status"))
             self._error_message.show()
             return
         elif self._authentication_state != AuthState.Authenticated:
@@ -668,14 +671,16 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
                     if self._json_printer_state["heads"][0]["extruders"][index]["hotend"]["id"] == "":
                         Logger.log("e", "No cartridge loaded in slot %s, unable to start print", index + 1)
                         self._error_message = Message(
-                            i18n_catalog.i18nc("@info:status", "Unable to start a new print job. No Printcore loaded in slot {0}".format(index + 1)))
+                            i18n_catalog.i18nc("@info:status", "Unable to start a new print job. No Printcore loaded in slot {0}".format(index + 1)),
+                            title = i18n_catalog.i18nc("@info:title", "Error"))
                         self._error_message.show()
                         return
                     if self._json_printer_state["heads"][0]["extruders"][index]["active_material"]["guid"] == "":
                         Logger.log("e", "No material loaded in slot %s, unable to start print", index + 1)
                         self._error_message = Message(
                             i18n_catalog.i18nc("@info:status",
-                                               "Unable to start a new print job. No material loaded in slot {0}".format(index + 1)))
+                                               "Unable to start a new print job. No material loaded in slot {0}".format(index + 1)),
+                            title = i18n_catalog.i18nc("@info:title", "Error"))
                         self._error_message.show()
                         return
 
@@ -831,7 +836,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
     def startPrint(self):
         try:
             self._send_gcode_start = time()
-            self._progress_message = Message(i18n_catalog.i18nc("@info:status", "Sending data to printer"), 0, False, -1)
+            self._progress_message = Message(i18n_catalog.i18nc("@info:status", "Sending data to printer"), 0, False, -1, i18n_catalog.i18nc("@info:title", "Sending Data"))
             self._progress_message.addAction("Abort", i18n_catalog.i18nc("@action:button", "Cancel"), None, "")
             self._progress_message.actionTriggered.connect(self._progressMessageActionTrigger)
             self._progress_message.show()
@@ -900,7 +905,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice):
 
         except IOError:
             self._progress_message.hide()
-            self._error_message = Message(i18n_catalog.i18nc("@info:status", "Unable to send data to printer. Is another job still active?"))
+            self._error_message = Message(i18n_catalog.i18nc("@info:status", "Unable to send data to printer. Is another job still active?"),
+                                          title = i18n_catalog.i18nc("@info:title", "Warning"))
             self._error_message.show()
         except Exception as e:
             self._progress_message.hide()

plugins/USBPrinting/USBPrinterOutputDevice.py

@@ -150,7 +150,7 @@ class USBPrinterOutputDevice(PrinterOutputDevice):
     def printGCode(self, gcode_list):
         Logger.log("d", "Started printing g-code")
         if self._progress or self._connection_state != ConnectionState.connected:
-            self._error_message = Message(catalog.i18nc("@info:status", "Unable to start a new job because the printer is busy or not connected."))
+            self._error_message = Message(catalog.i18nc("@info:status", "Unable to start a new job because the printer is busy or not connected."), title = catalog.i18nc("@info:title", "Print Details"))
             self._error_message.show()
             Logger.log("d", "Printer is busy or not connected, aborting print")
             self.writeError.emit(self)
@@ -453,11 +453,11 @@ class USBPrinterOutputDevice(PrinterOutputDevice):
         container_stack = Application.getInstance().getGlobalContainerStack()
 
         if container_stack.getProperty("machine_gcode_flavor", "value") == "UltiGCode":
-            self._error_message = Message(catalog.i18nc("@info:status", "This printer does not support USB printing because it uses UltiGCode flavor."))
+            self._error_message = Message(catalog.i18nc("@info:status", "This printer does not support USB printing because it uses UltiGCode flavor."), title = catalog.i18nc("@info:title", "USB Printing"))
             self._error_message.show()
             return
         elif not container_stack.getMetaDataEntry("supports_usb_connection"):
-            self._error_message = Message(catalog.i18nc("@info:status", "Unable to start a new job because the printer does not support usb printing."))
+            self._error_message = Message(catalog.i18nc("@info:status", "Unable to start a new job because the printer does not support usb printing."), title = catalog.i18nc("@info:title", "Warning"))
             self._error_message.show()
             return
 
@@ -622,8 +622,9 @@ class USBPrinterOutputDevice(PrinterOutputDevice):
         self._sendCommand("M140 S0")
         self._sendCommand("M104 S0")
         self._sendCommand("M107")
+        # Home XY to prevent nozzle resting on aborted print
+        # Don't home bed because it may crash the printhead into the print on printers that home on the bottom
         self.homeHead()
-        self.homeBed()
         self._sendCommand("M84")
         self._is_printing = False
         self._is_paused = False

plugins/USBPrinting/USBPrinterOutputDeviceManager.py

@@ -105,7 +105,7 @@ class USBPrinterOutputDeviceManager(QObject, OutputDevicePlugin, Extension):
         if file_name.startswith("file://"):
             file_name = QUrl(file_name).toLocalFile() # File dialogs prepend the path with file://, which we don't need / want
         if not self._usb_output_devices:
-            Message(i18n_catalog.i18nc("@info", "Unable to update firmware because there are no printers connected.")).show()
+            Message(i18n_catalog.i18nc("@info", "Unable to update firmware because there are no printers connected."), title = i18n_catalog.i18nc("@info:title", "Warning")).show()
             return
 
         for printer_connection in self._usb_output_devices:
@@ -119,7 +119,7 @@ class USBPrinterOutputDeviceManager(QObject, OutputDevicePlugin, Extension):
                 self._usb_output_devices[printer_connection].setProgress(100, 100)
                 Logger.log("w", "No firmware found for printer %s called '%s'", printer_connection, file_name)
                 Message(i18n_catalog.i18nc("@info",
-                    "Could not find firmware required for the printer at %s.") % printer_connection).show()
+                    "Could not find firmware required for the printer at %s.") % printer_connection, title = i18n_catalog.i18nc("@info:title", "Printer Firmware")).show()
                 self._firmware_view.close()
 
                 continue

plugins/VersionUpgrade/VersionUpgrade27to30/VersionUpgrade27to30.py

@@ -9,6 +9,24 @@ from UM.VersionUpgrade import VersionUpgrade #We're inheriting from this.
 _renamed_themes = {
     "cura": "cura-light"
 }
+_renamed_i18n = {
+    "7s": "en_7S",
+    "de": "de_DE",
+    "en": "en_US",
+    "es": "es_ES",
+    "fi": "fi_FI",
+    "fr": "fr_FR",
+    "hu": "hu_HU",
+    "it": "it_IT",
+    "jp": "ja_JP",
+    "ko": "ko_KR",
+    "nl": "nl_NL",
+    "pl": "pl_PL",
+    "ptbr": "pt_BR",
+    "ru": "ru_RU",
+    "tr": "tr_TR"
+}
+
 
 class VersionUpgrade27to30(VersionUpgrade):
     ##  Gets the version number from a CFG file in Uranium's 2.7 format.
@@ -43,14 +61,89 @@ class VersionUpgrade27to30(VersionUpgrade):
         parser["general"]["version"] = "5"
         if "metadata" not in parser:
             parser["metadata"] = {}
-        parser["metadata"]["setting_version"] = "2"
+        parser["metadata"]["setting_version"] = "3"
 
         #Renamed themes.
         if "theme" in parser["general"]:
             if parser["general"]["theme"] in _renamed_themes:
                 parser["general"]["theme"] = _renamed_themes[parser["general"]["theme"]]
 
+        #Renamed languages.
+        if "language" in parser["general"]:
+            if parser["general"]["language"] in _renamed_i18n:
+                parser["general"]["language"] = _renamed_i18n[parser["general"]["language"]]
+
+        # Renamed settings for skin pre-shrink settings
+        if parser.has_section("general") and "visible_settings" in parser["general"]:
+            visible_settings = parser["general"]["visible_settings"].split(";")
+            new_visible_settings = []
+            renamed_skin_preshrink_names = {"expand_upper_skins": "top_skin_expand_distance",
+                                            "expand_lower_skins": "bottom_skin_expand_distance"}
+            for setting in visible_settings:
+                if setting == "expand_skins_into_infill":
+                    continue # this one is removed
+                if setting in renamed_skin_preshrink_names:
+                    new_visible_settings.append(renamed_skin_preshrink_names[setting])
+                    continue #Don't add the original.
+                new_visible_settings.append(setting) #No special handling, so just add the original visible setting back.
+            parser["general"]["visible_settings"] = ";".join(new_visible_settings)
+
         # Re-serialise the file.
         output = io.StringIO()
         parser.write(output)
-        return [filename], [output.getvalue()]
+        return [filename], [output.getvalue()]
+
+    ##  Upgrades the given instance container file from version 2.7 to 3.0.
+    #
+    #   \param serialised The serialised form of the container file.
+    #   \param filename The name of the file to upgrade.
+    def upgradeOtherContainer(self, serialised, filename):
+        parser = configparser.ConfigParser(interpolation=None)
+        parser.read_string(serialised)
+
+        # Update the skin pre-shrink settings:
+        #  - Remove the old ones
+        #  - Do not add the new ones. The default values will be used for them.
+        if parser.has_section("values"):
+            for remove_key in ["expand_skins_into_infill", "expand_upper_skins", "expand_lower_skins"]:
+                if remove_key in parser["values"]:
+                    del parser["values"][remove_key]
+
+        for each_section in ("general", "metadata"):
+            if not parser.has_section(each_section):
+                parser.add_section(each_section)
+
+        # Update version numbers
+        parser["general"]["version"] = "2"
+        parser["metadata"]["setting_version"] = "3"
+
+        # Re-serialise the file.
+        output = io.StringIO()
+        parser.write(output)
+        return [filename], [output.getvalue()]
+
+    ##  Upgrades a container stack from version 2.7 to 3.0.
+    #
+    #   \param serialised The serialised form of a container stack.
+    #   \param filename The name of the file to upgrade.
+    def upgradeStack(self, serialised, filename):
+        parser = configparser.ConfigParser(interpolation=None)
+        parser.read_string(serialised)
+
+        for each_section in ("general", "metadata"):
+            if not parser.has_section(each_section):
+                parser.add_section(each_section)
+
+        # Update version numbers
+        if "general" not in parser:
+            parser["general"] = {}
+        parser["general"]["version"] = "3"
+
+        if "metadata" not in parser:
+            parser["metadata"] = {}
+        parser["metadata"]["setting_version"] = "3"
+
+        # Re-serialise the file.
+        output = io.StringIO()
+        parser.write(output)
+        return [filename], [output.getvalue()]

plugins/VersionUpgrade/VersionUpgrade27to30/__init__.py

@@ -9,13 +9,46 @@ def getMetaData():
     return {
         "version_upgrade": {
             # From                    To                       Upgrade function
-            ("preferences", 4000002): ("preferences", 5000002, upgrade.upgradePreferences),
+            ("preferences", 4000002): ("preferences", 5000003, upgrade.upgradePreferences),
+
+            ("machine_stack", 3000002):     ("machine_stack", 3000003,     upgrade.upgradeStack),
+            ("extruder_train", 3000002):    ("extruder_train", 3000003,    upgrade.upgradeStack),
+
+            ("quality_changes", 2000002):    ("quality_changes", 2000003,    upgrade.upgradeOtherContainer),
+            ("user", 2000002):               ("user", 2000003,               upgrade.upgradeOtherContainer),
+            ("quality", 2000002):            ("quality", 2000003,            upgrade.upgradeOtherContainer),
+            ("definition_changes", 2000002): ("definition_changes", 2000003, upgrade.upgradeOtherContainer),
+            ("variant", 2000002):            ("variant", 2000003,            upgrade.upgradeOtherContainer)
         },
         "sources": {
             "preferences": {
                 "get_version": upgrade.getCfgVersion,
                 "location": {"."}
             },
+            "machine_stack": {
+                "get_version": upgrade.getCfgVersion,
+                "location": {"./machine_instances"}
+            },
+            "extruder_train": {
+                "get_version": upgrade.getCfgVersion,
+                "location": {"./extruders"}
+            },
+            "quality_changes": {
+                "get_version": upgrade.getCfgVersion,
+                "location": {"./quality"}
+            },
+            "user": {
+                "get_version": upgrade.getCfgVersion,
+                "location": {"./user"}
+            },
+            "definition_changes": {
+                "get_version": upgrade.getCfgVersion,
+                "location": {"./definition_changes"}
+            },
+            "variant": {
+                "get_version": upgrade.getCfgVersion,
+                "location": {"./variants"}
+            }
         }
     }
 

plugins/XRayView/__init__.py

@@ -9,7 +9,7 @@ catalog = i18nCatalog("cura")
 def getMetaData():
     return {
         "view": {
-            "name": catalog.i18nc("@item:inlistbox", "X-Ray"),
+            "name": catalog.i18nc("@item:inlistbox", "X-Ray view"),
             "weight": 1
         }
     }

plugins/XmlMaterialProfile/XmlMaterialProfile.py

@@ -35,7 +35,7 @@ class XmlMaterialProfile(InstanceContainer):
     #   \return The corresponding setting_version.
     def xmlVersionToSettingVersion(self, xml_version: str) -> int:
         if xml_version == "1.3":
-            return 2
+            return 3
         return 0 #Older than 1.3.
 
     def getInheritedFiles(self):

plugins/XmlMaterialProfile/__init__.py

@@ -19,7 +19,7 @@ def getMetaData():
             "mimetype": "application/x-ultimaker-material-profile"
         },
         "version_upgrade": {
-            ("materials", 1000000): ("materials", 1000002, upgrader.upgradeMaterial),
+            ("materials", 1000000): ("materials", 1000003, upgrader.upgradeMaterial),
         },
         "sources": {
             "materials": {

resources/definitions/fdmprinter.def.json

@@ -566,6 +566,7 @@
                     "unit": "mm/s",
                     "type": "float",
                     "default_value": 20.0,
+                    "minimum_value": "0",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false,
                     "settable_per_meshgroup": false
@@ -577,6 +578,7 @@
                     "unit": "mm/s",
                     "type": "float",
                     "default_value": 0.4,
+                    "minimum_value": "0",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false,
                     "settable_per_meshgroup": false
@@ -588,6 +590,7 @@
                     "unit": "mm/s",
                     "type": "float",
                     "default_value": 5.0,
+                    "minimum_value": "0",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false,
                     "settable_per_meshgroup": false
@@ -1231,7 +1234,7 @@
                         "random": "Random",
                         "sharpest_corner": "Sharpest Corner"
                     },
-                    "default_value": "shortest",
+                    "default_value": "sharpest_corner",
                     "limit_to_extruder": "wall_0_extruder_nr",
                     "settable_per_mesh": true
                 },
@@ -1295,6 +1298,17 @@
                     "default_value": true,
                     "limit_to_extruder": "top_bottom_extruder_nr",
                     "settable_per_mesh": true
+                },
+                "skin_outline_count":
+                {
+                    "label": "Extra Skin Wall Count",
+                    "description": "Replaces the outermost part of the top/bottom pattern with a number of concentric lines. Using one or two lines improves roofs that start on infill material.",
+                    "default_value": 1,
+                    "minimum_value": "0",
+                    "maximum_value_warning": "10",
+                    "type": "int",
+                    "limit_to_extruder": "top_bottom_extruder_nr",
+                    "settable_per_mesh": true
                 }
             }
         },
@@ -1531,11 +1545,12 @@
                 },
                 "skin_preshrink":
                 {
-                    "label": "Skin Pre-Shrink Distance",
-                    "description": "The distance the skins are shrunk before considering them for skin expansion. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model.",
+                    "label": "Skin Removal Width",
+                    "description": "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model.",
                     "unit": "mm",
                     "type": "float",
                     "default_value": 0,
+                    "value": "wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x",
                     "minimum_value": "0",
                     "limit_to_extruder": "top_bottom_extruder_nr",
                     "settable_per_mesh": true,
@@ -1543,8 +1558,8 @@
                     {
                         "top_skin_preshrink":
                         {
-                            "label": "Top Skin Pre-Shrink Distance",
-                            "description": "The distance the top skins are shrunk before considering them for skin expansion. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model.",
+                            "label": "Top Skin Removal Width",
+                            "description": "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model.",
                             "unit": "mm",
                             "type": "float",
                             "default_value": 0,
@@ -1555,8 +1570,8 @@
                         },
                         "bottom_skin_preshrink":
                         {
-                            "label": "Bottom Skin Pre-Shrink Distance",
-                            "description": "The distance the bottom skins are shrunk before considering them for skin expansion. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model.",
+                            "label": "Bottom Skin Removal Width",
+                            "description": "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model.",
                             "unit": "mm",
                             "type": "float",
                             "default_value": 0,
@@ -1567,51 +1582,45 @@
                         }
                     }
                 },
-                "expand_skins_into_infill":
+                "expand_skins_expand_distance":
                 {
-                    "label": "Expand Skins Into Infill",
-                    "description": "Expand skin areas of top and/or bottom skin of flat surfaces. By default, skins stop under the wall lines that surround infill but this can lead to holes appearing when the infill density is low. This setting extends the skins beyond the wall lines so that the infill on the next layer rests on skin.",
-                    "type": "bool",
-                    "default_value": false,
+                    "label": "Skin Expand Distance",
+                    "description": "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used.",
+                    "unit": "mm",
+                    "type": "float",
+                    "default_value": 2.8,
+                    "value": "wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x",
+                    "minimum_value": "-skin_preshrink",
                     "limit_to_extruder": "top_bottom_extruder_nr",
                     "settable_per_mesh": true,
                     "children":
                     {
-                        "expand_upper_skins":
+                        "top_skin_expand_distance":
                         {
-                            "label": "Expand Top Skins Into Infill",
-                            "description": "Expand the top skin areas (areas with air above) so that they support infill above.",
-                            "type": "bool",
-                            "default_value": false,
-                            "value": "expand_skins_into_infill",
+                            "label": "Top Skin Expand Distance",
+                            "description": "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used.",
+                            "unit": "mm",
+                            "type": "float",
+                            "default_value": 2.8,
+                            "value": "expand_skins_expand_distance",
+                            "minimum_value": "-top_skin_preshrink",
                             "limit_to_extruder": "top_bottom_extruder_nr",
                             "settable_per_mesh": true
                         },
-                        "expand_lower_skins":
+                        "bottom_skin_expand_distance":
                         {
-                            "label": "Expand Bottom Skins Into Infill",
-                            "description": "Expand the bottom skin areas (areas with air below) so that they are anchored by the infill layers above and below.",
-                            "type": "bool",
-                            "default_value": false,
+                            "label": "Bottom Skin Expand Distance",
+                            "description": "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used.",
+                            "unit": "mm",
+                            "type": "float",
+                            "default_value": 2.8,
+                            "value": "expand_skins_expand_distance",
+                            "minimum_value": "-bottom_skin_preshrink",
                             "limit_to_extruder": "top_bottom_extruder_nr",
-                            "value": "expand_skins_into_infill",
                             "settable_per_mesh": true
                         }
                     }
                 },
-                "expand_skins_expand_distance":
-                {
-                    "label": "Skin Expand Distance",
-                    "description": "The distance the skins are expanded into the infill. The default distance is enough to bridge the gap between the infill lines and will stop holes appearing in the skin where it meets the wall when the infill density is low. A smaller distance will often be sufficient.",
-                    "unit": "mm",
-                    "type": "float",
-                    "default_value": 2.8,
-                    "value": "infill_line_distance * 1.4",
-                    "minimum_value": "0",
-                    "enabled": "expand_upper_skins or expand_lower_skins",
-                    "limit_to_extruder": "top_bottom_extruder_nr",
-                    "settable_per_mesh": true
-                },
                 "max_skin_angle_for_expansion":
                 {
                     "label": "Maximum Skin Angle for Expansion",
@@ -1620,10 +1629,9 @@
                     "type": "float",
                     "minimum_value": "0",
                     "minimum_value_warning": "2",
-                    "maximum_value_warning": "45",
                     "maximum_value": "90",
-                    "default_value": 20,
-                    "enabled": "expand_upper_skins or expand_lower_skins",
+                    "default_value": 90,
+                    "enabled": "top_skin_expand_distance > 0 or bottom_skin_expand_distance > 0",
                     "limit_to_extruder": "top_bottom_extruder_nr",
                     "settable_per_mesh": true,
                     "children":
@@ -1637,7 +1645,7 @@
                             "default_value": 2.24,
                             "value": "top_layers * layer_height / math.tan(math.radians(max_skin_angle_for_expansion))",
                             "minimum_value": "0",
-                            "enabled": "expand_upper_skins or expand_lower_skins",
+                            "enabled": "top_skin_expand_distance > 0 or bottom_skin_expand_distance > 0",
                             "limit_to_extruder": "top_bottom_extruder_nr",
                             "settable_per_mesh": true
                         }
@@ -2677,7 +2685,7 @@
                     "description": "The maximum instantaneous velocity change of the print head.",
                     "unit": "mm/s",
                     "type": "float",
-                    "minimum_value": "0.1",
+                    "minimum_value": "0",
                     "maximum_value_warning": "50",
                     "default_value": 20,
                     "enabled": "resolveOrValue('jerk_enabled')",
@@ -2690,7 +2698,7 @@
                             "description": "The maximum instantaneous velocity change with which infill is printed.",
                             "unit": "mm/s",
                             "type": "float",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "default_value": 20,
                             "value": "jerk_print",
@@ -2704,7 +2712,7 @@
                             "description": "The maximum instantaneous velocity change with which the walls are printed.",
                             "unit": "mm/s",
                             "type": "float",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "default_value": 20,
                             "value": "jerk_print",
@@ -2718,7 +2726,7 @@
                                     "description": "The maximum instantaneous velocity change with which the outermost walls are printed.",
                                     "unit": "mm/s",
                                     "type": "float",
-                                    "minimum_value": "0.1",
+                                    "minimum_value": "0",
                                     "maximum_value_warning": "50",
                                     "default_value": 20,
                                     "value": "jerk_wall",
@@ -2732,7 +2740,7 @@
                                     "description": "The maximum instantaneous velocity change with which all inner walls are printed.",
                                     "unit": "mm/s",
                                     "type": "float",
-                                    "minimum_value": "0.1",
+                                    "minimum_value": "0",
                                     "maximum_value_warning": "50",
                                     "default_value": 20,
                                     "value": "jerk_wall",
@@ -2748,7 +2756,7 @@
                             "description": "The maximum instantaneous velocity change with which top surface skin layers are printed.",
                             "unit": "mm/s",
                             "type": "float",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "default_value": 20,
                             "value": "jerk_topbottom",
@@ -2762,7 +2770,7 @@
                             "description": "The maximum instantaneous velocity change with which top/bottom layers are printed.",
                             "unit": "mm/s",
                             "type": "float",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "default_value": 20,
                             "value": "jerk_print",
@@ -2776,7 +2784,7 @@
                             "description": "The maximum instantaneous velocity change with which the support structure is printed.",
                             "unit": "mm/s",
                             "type": "float",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "default_value": 20,
                             "value": "jerk_print",
@@ -2794,7 +2802,7 @@
                                     "type": "float",
                                     "default_value": 20,
                                     "value": "jerk_support",
-                                    "minimum_value": "0.1",
+                                    "minimum_value": "0",
                                     "maximum_value_warning": "50",
                                     "enabled": "resolveOrValue('jerk_enabled') and support_enable",
                                     "limit_to_extruder": "support_infill_extruder_nr",
@@ -2809,7 +2817,7 @@
                                     "type": "float",
                                     "default_value": 20,
                                     "value": "jerk_support",
-                                    "minimum_value": "0.1",
+                                    "minimum_value": "0",
                                     "maximum_value_warning": "50",
                                     "enabled": "resolveOrValue('jerk_enabled') and support_interface_enable and support_enable",
                                     "limit_to_extruder": "support_interface_extruder_nr",
@@ -2825,7 +2833,7 @@
                                             "type": "float",
                                             "default_value": 20,
                                             "value": "extruderValue(support_roof_extruder_nr, 'jerk_support_interface')",
-                                            "minimum_value": "0.1",
+                                            "minimum_value": "0",
                                             "maximum_value_warning": "50",
                                             "enabled": "resolveOrValue('jerk_enabled') and support_roof_enable and support_enable",
                                             "limit_to_extruder": "support_roof_extruder_nr",
@@ -2840,7 +2848,7 @@
                                             "type": "float",
                                             "default_value": 20,
                                             "value": "extruderValue(support_roof_extruder_nr, 'jerk_support_interface')",
-                                            "minimum_value": "0.1",
+                                            "minimum_value": "0",
                                             "maximum_value_warning": "50",
                                             "enabled": "resolveOrValue('jerk_enabled') and support_bottom_enable and support_enable",
                                             "limit_to_extruder": "support_bottom_extruder_nr",
@@ -2857,7 +2865,7 @@
                             "description": "The maximum instantaneous velocity change with which the prime tower is printed.",
                             "unit": "mm/s",
                             "type": "float",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "default_value": 20,
                             "value": "jerk_print",
@@ -2873,7 +2881,7 @@
                     "unit": "mm/s",
                     "type": "float",
                     "default_value": 30,
-                    "minimum_value": "0.1",
+                    "minimum_value": "0",
                     "maximum_value_warning": "50",
                     "value": "jerk_print if magic_spiralize else 30",
                     "enabled": "resolveOrValue('jerk_enabled')",
@@ -2887,7 +2895,7 @@
                     "type": "float",
                     "default_value": 20,
                     "value": "jerk_print",
-                    "minimum_value": "0.1",
+                    "minimum_value": "0",
                     "maximum_value_warning": "50",
                     "enabled": "resolveOrValue('jerk_enabled')",
                     "settable_per_mesh": true,
@@ -2901,7 +2909,7 @@
                             "type": "float",
                             "default_value": 20,
                             "value": "jerk_layer_0",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "enabled": "resolveOrValue('jerk_enabled')",
                             "settable_per_mesh": true
@@ -2914,7 +2922,7 @@
                             "type": "float",
                             "default_value": 20,
                             "value": "jerk_layer_0 * jerk_travel / jerk_print",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "maximum_value_warning": "50",
                             "enabled": "resolveOrValue('jerk_enabled')",
                             "settable_per_extruder": true,
@@ -2929,7 +2937,7 @@
                     "unit": "mm/s",
                     "type": "float",
                     "default_value": 20,
-                    "minimum_value": "0.1",
+                    "minimum_value": "0",
                     "maximum_value_warning": "50",
                     "value": "jerk_layer_0",
                     "enabled": "resolveOrValue('jerk_enabled')",
@@ -4448,7 +4456,7 @@
                     "unit": "mm/s",
                     "type": "float",
                     "default_value": 20,
-                    "minimum_value": "0.1",
+                    "minimum_value": "0",
                     "minimum_value_warning": "5",
                     "maximum_value_warning": "50",
                     "value": "jerk_print",
@@ -4465,7 +4473,7 @@
                             "type": "float",
                             "default_value": 20,
                             "value": "raft_jerk",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "minimum_value_warning": "5",
                             "maximum_value_warning": "100",
                             "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('jerk_enabled')",
@@ -4480,7 +4488,7 @@
                             "type": "float",
                             "default_value": 20,
                             "value": "raft_jerk",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "minimum_value_warning": "5",
                             "maximum_value_warning": "50",
                             "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('jerk_enabled')",
@@ -4495,7 +4503,7 @@
                             "type": "float",
                             "default_value": 20,
                             "value": "raft_jerk",
-                            "minimum_value": "0.1",
+                            "minimum_value": "0",
                             "minimum_value_warning": "5",
                             "maximum_value_warning": "50",
                             "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('jerk_enabled')",
@@ -5000,6 +5008,17 @@
                     "enabled": "magic_spiralize",
                     "settable_per_mesh": false,
                     "settable_per_extruder": false
+                },
+                "relative_extrusion":
+                {
+                    "label": "Relative Extrusion",
+                    "description": "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output.",
+                    "type": "bool",
+                    "default_value": false,
+                    "value": "machine_gcode_flavor==\"RepRap (RepRap)\"",
+                    "enabled": true,
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": false
                 }
             }
         },
@@ -5139,17 +5158,6 @@
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
-                "skin_outline_count":
-                {
-                    "label": "Extra Skin Wall Count",
-                    "description": "Replaces the outermost part of the top/bottom pattern with a number of concentric lines. Using one or two lines improves roofs that start on infill material.",
-                    "default_value": 0,
-                    "minimum_value": "0",
-                    "maximum_value_warning": "10",
-                    "type": "int",
-                    "limit_to_extruder": "top_bottom_extruder_nr",
-                    "settable_per_mesh": true
-                },
                 "skin_alternate_rotation":
                 {
                     "label": "Alternate Skin Rotation",
@@ -5803,7 +5811,7 @@
                     "description": "The maximum instantaneous velocity change while performing ironing.",
                     "unit": "mm/s",
                     "type": "float",
-                    "minimum_value": "0.1",
+                    "minimum_value": "0",
                     "maximum_value_warning": "50",
                     "default_value": 20,
                     "value": "jerk_topbottom",

resources/definitions/ultimaker.def.json

@@ -31,6 +31,11 @@
         {
             "minimum_value": "0",
             "maximum_value": "machine_width"
+        },
+        "relative_extrusion":
+        {
+            "value": false,
+            "enabled": false
         }
     }
 }

resources/definitions/vertex_delta_k8800.def.json

@@ -0,0 +1,62 @@
+{
+  "id": "K8800",
+  "name": "Vertex Delta K8800",
+  "version": 2,
+  "inherits": "fdmprinter",
+  "metadata": {
+    "manufacturer": "Velleman nv",
+    "file_formats": "text/x-gcode",
+    "visible": true,
+    "author": "Velleman"
+  },
+  "overrides": {
+    "machine_width": {
+      "default_value": 200
+    },
+    "machine_height": {
+      "default_value": 225
+    },
+    "machine_depth": {
+      "default_value": 200
+    },
+    "machine_center_is_zero": {
+      "default_value": true
+    },
+    "machine_shape": {
+      "default_value": "elliptic"
+    },
+    "machine_nozzle_size": {
+      "default_value": 0.35
+    },
+    "machine_head_shape_min_x": {
+      "default_value": 0
+    },
+    "machine_head_shape_min_y": {
+      "default_value": 0
+    },
+    "machine_head_shape_max_x": {
+      "default_value": 0
+    },
+    "machine_head_shape_max_y": {
+      "default_value": 0
+    },
+    "machine_nozzle_gantry_distance": {
+      "default_value": 0
+    },
+    "machine_nozzle_offset_x_1": {
+      "default_value": 0
+    },
+    "machine_nozzle_offset_y_1": {
+      "default_value": 0
+    },
+    "machine_gcode_flavor": {
+      "default_value": "RepRap (Marlin/Sprinter)"
+    },
+    "machine_start_gcode": {
+      "default_value": "; Vertex Delta Start Gcode\nM0 Is my nozzle clean?\nM400\nG28 ; Home extruder\nM106 S128 ; Start fan\nM104 T0 R130 ; Set cold nozzle\nM109 T0 R130 ; Wait for cold nozzle\nM117 Leveling bed...\nG29 ; Level Bed\nG1 X0 Y100 Z1 F2000\nG92 Z0.9 ; Set Z position (SET Z OFFSET HERE -> 1 - OFFSET)\nM107 ; Stop fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM104 T0 S{material_print_temperature}\nG92 E0 ; Reset extruder position\nM109 T0 S{material_print_temperature}\nM117 Priming nozzle...\nM83\nG1 E20 F100 ; purge/prime nozzle\nM82\nG92 E0 ; Reset extruder position\nG4 S3 ; Wait 3 seconds\nG1 Z5 F2000\nM117 Vertex Delta printing"
+    },
+    "machine_end_gcode": {
+      "default_value": "; Vertex Delta end code\nM107 ; Turn off fan\nG91 ; Relative positioning\nT0\nG1 E-1 F1500; Reduce filament pressure\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM300 S4000 P500\nM300 S3000 P500\nM300 S2000 P800\nG28\nM84 ; Turn steppers off"
+    }
+  }
+}

resources/qml/Cura.qml

@@ -319,24 +319,6 @@ UM.MainWindow
                 }
             }
 
-            Loader
-            {
-                id: view_panel
-
-                property bool hugBottom: parent.height < viewModeButton.y + viewModeButton.height + height + UM.Theme.getSize("default_margin").height
-
-                anchors.bottom: parent.bottom // panel is always anchored to the bottom only, because dynamically switching between bottom and top results in stretching the height
-                anchors.bottomMargin: hugBottom ? 0 : parent.height - (viewModeButton.y + viewModeButton.height + height + UM.Theme.getSize("default_margin").height)
-                anchors.left: viewModeButton.left;
-                anchors.leftMargin: hugBottom ? viewModeButton.width + UM.Theme.getSize("default_margin").width : 0
-
-                property var buttonTarget: Qt.point(viewModeButton.x + viewModeButton.width / 2, viewModeButton.y + viewModeButton.height / 2)
-
-                height: childrenRect.height;
-
-                source: UM.ActiveView.valid ? UM.ActiveView.activeViewPanel : "";
-            }
-
             Button
             {
                 id: openFileButton;
@@ -393,25 +375,6 @@ UM.MainWindow
                 monitoringPrint: base.showPrintMonitor
             }
 
-            Button
-            {
-                id: viewModeButton
-
-                anchors
-                {
-                    top: toolbar.bottom;
-                    topMargin: UM.Theme.getSize("window_margin").height;
-                    left: parent.left;
-                }
-                text: catalog.i18nc("@action:button","View Mode");
-                iconSource: UM.Theme.getIcon("viewmode");
-
-                style: UM.Theme.styles.tool_button;
-                tooltip: "";
-                enabled: !PrintInformation.preSliced
-                menu: ViewMenu { }
-            }
-
             Rectangle
             {
                 id: viewportOverlay

resources/qml/Preferences/GeneralPage.qml

@@ -1,4 +1,4 @@
-// Copyright (c) 2016 Ultimaker B.V.
+// Copyright (c) 2017 Ultimaker B.V.
 // Cura is released under the terms of the AGPLv3 or higher.
 
 import QtQuick 2.1
@@ -148,25 +148,25 @@ UM.PreferencesPage
                         id: languageList
 
                         Component.onCompleted: {
-                            append({ text: "English", code: "en" })
-                            append({ text: "Deutsch", code: "de" })
-                            append({ text: "Español", code: "es" })
-                            append({ text: "Suomi", code: "fi" })
-                            append({ text: "Français", code: "fr" })
-                            append({ text: "Italiano", code: "it" })
-                            append({ text: "日本語", code: "jp" })
-                            append({ text: "한국어", code: "ko" })
-                            append({ text: "Nederlands", code: "nl" })
-                            append({ text: "Polski", code: "pl" })
-                            append({ text: "Português do Brasil", code: "ptbr" })
-                            append({ text: "Русский", code: "ru" })
-                            append({ text: "Türkçe", code: "tr" })
+                            append({ text: "English", code: "en_US" })
+                            append({ text: "Deutsch", code: "de_DE" })
+                            append({ text: "Español", code: "es_ES" })
+                            append({ text: "Suomi", code: "fi_FI" })
+                            append({ text: "Français", code: "fr_FR" })
+                            append({ text: "Italiano", code: "it_IT" })
+                            append({ text: "日本語", code: "ja_JP" })
+                            append({ text: "한국어", code: "ko_KR" })
+                            append({ text: "Nederlands", code: "nl_NL" })
+                            append({ text: "Polski", code: "pl_PL" })
+                            append({ text: "Português do Brasil", code: "pt_BR" })
+                            append({ text: "Русский", code: "ru_RU" })
+                            append({ text: "Türkçe", code: "tr_TR" })
                             append({ text: "简体中文", code: "zh_CN" })
 
                             var date_object = new Date();
                             if (date_object.getUTCMonth() == 8 && date_object.getUTCDate() == 19) //Only add Pirate on the 19th of September.
                             {
-                                append({ text: "Pirate", code: "7s" })
+                                append({ text: "Pirate", code: "en_7S" })
                             }
                         }
                     }

resources/qml/Sidebar.qml

@@ -181,7 +181,7 @@ Rectangle
                             color: (control.checked || control.pressed) ? UM.Theme.getColor("action_button_active_text") :
                                        control.hovered ? UM.Theme.getColor("action_button_hovered_text") :
                                        UM.Theme.getColor("action_button_text")
-                            font: (control.checked || control.pressed) ? UM.Theme.getFont("default_bold") : UM.Theme.getFont("default")
+                            font: UM.Theme.getFont("default")
                             text: control.text;
                         }
                     }

resources/qml/SidebarHeader.qml

@@ -153,7 +153,7 @@ Column
                                        control.hovered ? UM.Theme.getColor("action_button_hovered_text") :
                                        UM.Theme.getColor("action_button_text")
 
-                                font: control.checked ? UM.Theme.getFont("default_bold") : UM.Theme.getFont("default")
+                                font: UM.Theme.getFont("large_nonbold")
                                 text: catalog.i18nc("@label", "Extruder")
                                 visible: width < (control.width - extruderIconItem.width - UM.Theme.getSize("default_margin").width)
                                 elide: Text.ElideRight
@@ -351,14 +351,12 @@ Column
             rightMargin: UM.Theme.getSize("sidebar_margin").width
         }
 
-        Item
-        {
+        Item {
             height: UM.Theme.getSize("sidebar_setup").height
             anchors.right: parent.right
             width: parent.width * 0.7 + UM.Theme.getSize("sidebar_margin").width
 
-            UM.RecolorImage
-            {
+            UM.RecolorImage {
                 id: warningImage
                 anchors.right: materialInfoLabel.left
                 anchors.rightMargin: UM.Theme.getSize("default_margin").width
@@ -366,41 +364,33 @@ Column
                 source: UM.Theme.getIcon("warning")
                 width: UM.Theme.getSize("section_icon").width
                 height: UM.Theme.getSize("section_icon").height
-                //sourceSize.width: width + 5
-                //sourceSize.height: width + 5
-
                 color: UM.Theme.getColor("material_compatibility_warning")
                 visible: !Cura.MachineManager.isCurrentSetupSupported
             }
 
-            Text
-            {
+            Text {
                 id: materialInfoLabel
                 wrapMode: Text.WordWrap
-                text: catalog.i18nc("@label", "Check material compatibility")
-                font: UM.Theme.getFont("default");
+                text: catalog.i18nc("@label", "<a href='%1'>Check material compatibility</a>")
+                font: UM.Theme.getFont("default")
+                color: UM.Theme.getColor("text")
+                linkColor: UM.Theme.getColor("text_link")
                 verticalAlignment: Text.AlignTop
                 anchors.top: parent.top
                 anchors.right: parent.right
                 anchors.bottom: parent.bottom
-                color: UM.Theme.getColor("text")
 
-                MouseArea
-                {
+                MouseArea {
                     anchors.fill: parent
                     hoverEnabled: true
-                    onClicked:
-                    {
+                    onClicked: {
                         // open the material URL with web browser
                         var version = UM.Application.version;
                         var machineName = Cura.MachineManager.activeMachine.definition.id;
-
                         var url = "https://ultimaker.com/materialcompatibility/" + version + "/" + machineName;
                         Qt.openUrlExternally(url);
                     }
-                    onEntered:
-                    {
-
+                    onEntered: {
                         var content = catalog.i18nc("@tooltip", "Click to check the material compatibility on Ultimaker.com.");
                         base.showTooltip(
                             materialInfoRow,

resources/qml/SidebarSimple.qml

@@ -261,6 +261,7 @@ Item
             Text
             {
                 id: enableSupportLabel
+                visible: enableSupportCheckBox.visible
                 anchors.left: parent.left
                 anchors.leftMargin: UM.Theme.getSize("sidebar_margin").width
                 anchors.verticalCenter: enableSupportCheckBox.verticalCenter
@@ -281,6 +282,7 @@ Item
                 style: UM.Theme.styles.checkbox;
                 enabled: base.settingsEnabled
 
+                visible: supportEnabled.properties.enabled == "True"
                 checked: supportEnabled.properties.value == "True";
 
                 MouseArea
@@ -309,7 +311,7 @@ Item
             Text
             {
                 id: supportExtruderLabel
-                visible: (supportEnabled.properties.value == "True") && (machineExtruderCount.properties.value > 1)
+                visible: supportExtruderCombobox.visible
                 anchors.left: parent.left
                 anchors.leftMargin: UM.Theme.getSize("sidebar_margin").width
                 anchors.verticalCenter: supportExtruderCombobox.verticalCenter
@@ -321,7 +323,7 @@ Item
             ComboBox
             {
                 id: supportExtruderCombobox
-                visible: (supportEnabled.properties.value == "True") && (machineExtruderCount.properties.value > 1)
+                visible: enableSupportCheckBox.visible && (supportEnabled.properties.value == "True") && (machineExtruderCount.properties.value > 1)
                 model: extruderModel
 
                 property string color_override: ""  // for manually setting values
@@ -329,41 +331,19 @@ Item
                 {
                     var current_extruder = extruderModel.get(currentIndex);
                     color_override = "";
-                    if (current_extruder === undefined) {
-                        return "";
-                    }
-                    var model_color = current_extruder.color;
-                    return (model_color) ? model_color : "";
+                    if (current_extruder === undefined) return ""
+                    return (current_extruder.color) ? current_extruder.color : "";
                 }
 
-                textRole: 'text'  // this solves that the combobox isn't populated in the first time Cura is started
+                textRole: "text"  // this solves that the combobox isn't populated in the first time Cura is started
 
                 anchors.top: enableSupportCheckBox.bottom
-                anchors.topMargin:
-                {
-                    if ((supportEnabled.properties.value == "True") && (machineExtruderCount.properties.value > 1))
-                    {
-                        return UM.Theme.getSize("sidebar_margin").height;
-                    }
-                    else
-                    {
-                        return 0;
-                    }
-                }
+                anchors.topMargin: ((supportEnabled.properties.value === "True") && (machineExtruderCount.properties.value > 1)) ? UM.Theme.getSize("sidebar_margin").height : 0
                 anchors.left: infillCellRight.left
+
                 width: UM.Theme.getSize("sidebar").width * .55
-                height:
-                {
-                    if ((supportEnabled.properties.value == "True") && (machineExtruderCount.properties.value > 1))
-                    {
-                        // default height when control is enabled
-                        return UM.Theme.getSize("setting_control").height;
-                    }
-                    else
-                    {
-                        return 0;
-                    }
-                }
+                height: ((supportEnabled.properties.value == "True") && (machineExtruderCount.properties.value > 1)) ? UM.Theme.getSize("setting_control").height : 0
+
                 Behavior on height { NumberAnimation { duration: 100 } }
 
                 style: UM.Theme.styles.combobox_color
@@ -407,6 +387,7 @@ Item
             Text
             {
                 id: adhesionHelperLabel
+                visible: adhesionCheckBox.visible
                 anchors.left: parent.left
                 anchors.leftMargin: UM.Theme.getSize("sidebar_margin").width
                 anchors.verticalCenter: adhesionCheckBox.verticalCenter
@@ -421,7 +402,7 @@ Item
                 id: adhesionCheckBox
                 property alias _hovered: adhesionMouseArea.containsMouse
 
-                anchors.top: supportExtruderCombobox.bottom
+                anchors.top: enableSupportCheckBox.visible ? supportExtruderCombobox.bottom : infillCellRight.bottom
                 anchors.topMargin: UM.Theme.getSize("sidebar_margin").height
                 anchors.left: infillCellRight.left
 
@@ -429,6 +410,7 @@ Item
                 style: UM.Theme.styles.checkbox;
                 enabled: base.settingsEnabled
 
+                visible: platformAdhesionType.properties.enabled == "True"
                 checked: platformAdhesionType.properties.value != "skirt" && platformAdhesionType.properties.value != "none"
 
                 MouseArea
@@ -445,7 +427,7 @@ Item
                             // Remove the "user" setting to see if the rest of the stack prescribes a brim or a raft
                             platformAdhesionType.removeFromContainer(0);
                             adhesionType = platformAdhesionType.properties.value;
-                            if(adhesionType == "skirt")
+                            if(adhesionType == "skirt" || adhesionType == "none")
                             {
                                 // If the rest of the stack doesn't prescribe an adhesion-type, default to a brim
                                 adhesionType = "brim";
@@ -481,7 +463,7 @@ Item
             Item
             {
                 id: tipsCell
-                anchors.top: adhesionCheckBox.bottom
+                anchors.top: adhesionCheckBox.visible ? adhesionCheckBox.bottom : (enableSupportCheckBox.visible ? supportExtruderCombobox.bottom : infillCellRight.bottom)
                 anchors.topMargin: UM.Theme.getSize("sidebar_margin").height * 2
                 anchors.left: parent.left
                 width: parent.width
@@ -566,7 +548,7 @@ Item
 
                 containerStackId: Cura.MachineManager.activeMachineId
                 key: "adhesion_type"
-                watchedProperties: [ "value" ]
+                watchedProperties: [ "value", "enabled" ]
                 storeIndex: 0
             }
 
@@ -576,7 +558,7 @@ Item
 
                 containerStackId: Cura.MachineManager.activeMachineId
                 key: "support_enable"
-                watchedProperties: [ "value", "description" ]
+                watchedProperties: [ "value", "enabled", "description" ]
                 storeIndex: 0
             }
 

resources/qml/Topbar.qml

@@ -16,13 +16,16 @@ Rectangle
     anchors.left: parent.left
     anchors.right: parent.right
     height: UM.Theme.getSize("sidebar_header").height
-    color: "transparent"
+    color: base.monitoringPrint ? UM.Theme.getColor("topbar_background_color_monitoring") : UM.Theme.getColor("topbar_background_color")
+
+    Behavior on color { ColorAnimation { duration: 100; } }
 
     property bool printerConnected: Cura.MachineManager.printerOutputDevices.length != 0
     property bool printerAcceptsCommands: printerConnected && Cura.MachineManager.printerOutputDevices[0].acceptsCommands
     property bool monitoringPrint: false
     signal startMonitoringPrint()
     signal stopMonitoringPrint()
+
     UM.I18nCatalog
     {
         id: catalog
@@ -76,21 +79,21 @@ Rectangle
             text: catalog.i18nc("@title:tab", "Monitor")
             property string iconSource:
             {
-                if(!printerConnected)
+                if (!printerConnected)
                 {
                     return UM.Theme.getIcon("tab_status_unknown");
                 }
-                else if(!printerAcceptsCommands)
+                else if (!printerAcceptsCommands)
                 {
                     return UM.Theme.getIcon("tab_status_unknown");
                 }
 
-                if(Cura.MachineManager.printerOutputDevices[0].printerState == "maintenance")
+                if (Cura.MachineManager.printerOutputDevices[0].printerState == "maintenance")
                 {
                     return UM.Theme.getIcon("tab_status_busy");
                 }
 
-                switch(Cura.MachineManager.printerOutputDevices[0].jobState)
+                switch (Cura.MachineManager.printerOutputDevices[0].jobState)
                 {
                     case "printing":
                     case "pre_print":
@@ -121,7 +124,6 @@ Rectangle
         ExclusiveGroup { id: sidebarHeaderBarGroup }
     }
 
-
     ToolButton
     {
         id: machineSelection
@@ -142,28 +144,18 @@ Rectangle
                     if(control.pressed)
                     {
                         return UM.Theme.getColor("sidebar_header_active");
-                    } else if(control.hovered)
+                    }
+                    else if(control.hovered)
                     {
                         return UM.Theme.getColor("sidebar_header_hover");
-                    } else
+                    }
+                    else
                     {
                         return UM.Theme.getColor("sidebar_header_bar");
                     }
                 }
                 Behavior on color { ColorAnimation { duration: 50; } }
 
-                Rectangle
-                {
-                    id: underline;
-
-                    anchors.left: parent.left
-                    anchors.right: parent.right
-                    anchors.bottom: parent.bottom
-                    height: UM.Theme.getSize("sidebar_header_highlight").height
-                    color: UM.Theme.getColor("sidebar_header_highlight_hover")
-                    visible: control.hovered || control.pressed
-                }
-
                 UM.RecolorImage
                 {
                     id: downArrow
@@ -196,4 +188,60 @@ Rectangle
 
         menu: PrinterMenu { }
     }
+
+    ComboBox
+    {
+        id: viewModeButton
+        anchors
+        {
+            verticalCenter: parent.verticalCenter
+            right: parent.right
+            rightMargin: UM.Theme.getSize("sidebar").width + UM.Theme.getSize("default_margin").width
+        }
+        style: UM.Theme.styles.combobox
+        visible: !base.monitoringPrint
+
+        model: UM.ViewModel { }
+        textRole: "name"
+
+        onCurrentIndexChanged:
+        {
+            UM.Controller.setActiveView(model.getItem(currentIndex).id);
+
+            // Update the active flag
+            for (var i = 0; i < model.rowCount; ++i)
+            {
+                const is_active = i == currentIndex;
+                model.getItem(i).active = is_active;
+            }
+        }
+
+        currentIndex:
+        {
+            for (var i = 0; i < model.rowCount; ++i)
+            {
+                if (model.getItem(i).active)
+                {
+                    return i;
+                }
+            }
+            return 0;
+        }
+    }
+
+    Loader
+    {
+        id: view_panel
+
+        anchors.top: viewModeButton.bottom
+        anchors.topMargin: UM.Theme.getSize("default_margin").height
+        anchors.right: viewModeButton.right
+
+        property var buttonTarget: Qt.point(viewModeButton.x + viewModeButton.width / 2, viewModeButton.y + viewModeButton.height / 2)
+
+        height: childrenRect.height;
+
+        source: UM.ActiveView.valid ? UM.ActiveView.activeViewPanel : "";
+    }
+
 }

resources/quality/abax_pri3/apri3_pla_fast.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 0
 quality_type = normal
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.2

resources/quality/abax_pri3/apri3_pla_high.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 1
 quality_type = high
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.1

resources/quality/abax_pri3/apri3_pla_normal.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 0
 quality_type = normal
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.2

resources/quality/abax_pri5/apri5_pla_fast.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 0
 quality_type = normal
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.2

resources/quality/abax_pri5/apri5_pla_high.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 1
 quality_type = high
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.1

resources/quality/abax_pri5/apri5_pla_normal.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 0
 quality_type = normal
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.2

resources/quality/abax_titan/atitan_pla_fast.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 0
 quality_type = normal
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.2

resources/quality/abax_titan/atitan_pla_high.inst.cfg

@@ -7,7 +7,7 @@ type = quality
 material = generic_pla
 weight = 1
 quality_type = high
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.1

resources/quality/abax_titan/atitan_pla_normal.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 material = generic_pla
 weight = 0
 quality_type = normal
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.2

resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = high
 material = generic_abs_175_cartesio_0.25_mm
 weight = 1
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.3

resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = normal
 material = generic_abs_175_cartesio_0.25_mm
 weight = 2
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.3

resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = high
 material = generic_abs_175_cartesio_0.4_mm
 weight = 1
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.5

resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = normal
 material = generic_abs_175_cartesio_0.4_mm
 weight = 2
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.5

resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = coarse
 material = generic_abs_175_cartesio_0.8_mm
 weight = 3
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.9

resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = extra coarse
 material = generic_abs_175_cartesio_0.8_mm
 weight = 4
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.9

resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = high
 material = generic_abs_175_cartesio_0.8_mm
 weight = 1
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.9

resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = normal
 material = generic_abs_175_cartesio_0.8_mm
 weight = 2
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.9

resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = high
 material = dsm_arnitel2045_175_cartesio_0.4_mm
 weight = 1
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.5

resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = normal
 material = dsm_arnitel2045_175_cartesio_0.4_mm
 weight = 2
-setting_version = 2
+setting_version = 3
 
 [values]
 infill_line_width = 0.5

resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = coarse
 global_quality = True
 weight = 0
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.4

resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = extra coarse
 global_quality = True
 weight = 0
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.6

resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = high
 global_quality = True
 weight = 0
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.1

resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg

@@ -8,7 +8,7 @@ type = quality
 quality_type = normal
 global_quality = True
 weight = 0
-setting_version = 2
+setting_version = 3
 
 [values]
 layer_height = 0.2