Match UM2 with Olsson Block profiles to Paul's UM2+ PLA profiles

Contributes to CURA-91

resources/profiles/ultimaker2_olsson/0.25_normal.curaprofile

@@ -5,39 +5,30 @@ machine_type = ultimaker2_olsson
 machine_variant = 0.25 mm
 
 [settings]
-retraction_combing = All
-top_thickness = 0.72
-speed_layer_0 = 20
-speed_print = 20
-speed_wall_0 = 20
-raft_interface_line_spacing = 3.0
-shell_thickness = 0.88
-infill_overlap = 15
-retraction_hop = 0.0
-skin_no_small_gaps_heuristic = False
-retraction_speed = 40.0
-raft_surface_line_width = 0.4
-raft_base_line_width = 1.0
-raft_margin = 5.0
-adhesion_type = brim
-skirt_minimal_length = 150.0
-layer_height = 0.06
-brim_line_count = 36
-infill_before_walls = False
-raft_surface_thickness = 0.27
-raft_airgap = 0.0
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
-speed_topbottom = 20
-support_pattern = lines
-layer_height_0 = 0.15
-infill_sparse_density = 22
-top_bottom_thickness = 0.72
-speed_infill = 30
-magic_mesh_surface_mode = False
-bottom_thickness = 0.72
-speed_wall_x = 25
 machine_nozzle_size = 0.22
-raft_surface_line_spacing = 3.0
+layer_height = 0.06
-support_enable = False
+layer_height_0 = 0.15
-
+shell_thickness = 0.88
+top_bottom_thickness = 0.72
+travel_compensate_overlapping_walls_enabled = True
+skin_no_small_gaps_heuristic = False
+top_bottom_pattern = lines
+infill_sparse_density = 22
+infill_overlap = 0.022
+infill_wipe_dist = 0.1
+retraction_amount = 6
+retraction_min_travel = 0.5
+retraction_count_max = 30
+retraction_extrusion_window = 6
+speed_infill = 30
+speed_wall_0 = 20
+speed_wall_x = 25
+speed_topbottom = 20
+speed_layer_0 = 25
+skirt_speed = 25
+speed_slowdown_layers = 2
+travel_avoid_distance = 1
+cool_fan_full_layer = 2
+cool_min_layer_time_fan_speed_max = 15
+adhesion_type = brim
+brim_width = 7

resources/profiles/ultimaker2_olsson/0.4_fast.curaprofile

@@ -5,38 +5,31 @@ machine_type = ultimaker2_olsson
 machine_variant = 0.4 mm
 
 [settings]
-retraction_combing = All
-top_thickness = 0.75
-speed_print = 40
-speed_wall_0 = 40
-raft_surface_line_spacing = 3.0
-shell_thickness = 0.7
-infill_sparse_density = 18
-retraction_hop = 0.0
-skin_no_small_gaps_heuristic = False
-retraction_speed = 40.0
-raft_surface_line_width = 0.4
-raft_base_line_width = 1.0
-raft_margin = 5.0
-adhesion_type = brim
-skirt_minimal_length = 150.0
-layer_height = 0.15
-brim_line_count = 22
-infill_before_walls = False
-raft_surface_thickness = 0.27
-raft_airgap = 0.0
-infill_overlap = 15
-raft_interface_line_width = 0.4
-speed_topbottom = 30
-support_pattern = lines
-layer_height_0 = 0.26
-raft_interface_line_spacing = 3.0
-speed_travel = 150
-skirt_gap = 3.0
-magic_mesh_surface_mode = False
-bottom_thickness = 0.75
-speed_wall_x = 50
 machine_nozzle_size = 0.35
-top_bottom_thickness = 0.75
+layer_height = 0.15
-support_enable = False
+layer_height_0 = 0.26
-
+shell_thickness = 0.7
+top_bottom_thickness = 0.6
+travel_compensate_overlapping_walls_enabled = True
+skin_no_small_gaps_heuristic = False
+top_bottom_pattern = lines
+infill_sparse_density = 18
+infill_overlap = 0.035
+infill_wipe_dist = 0.2
+retraction_amount = 5.5
+retraction_min_travel = 0.5
+retraction_count_max = 30
+retraction_extrusion_window = 6
+speed_infill = 60
+speed_wall_0 = 40
+speed_wall_x = 50
+speed_topbottom = 30
+speed_travel = 150
+speed_layer_0 = 25
+skirt_speed = 25
+speed_slowdown_layers = 2
+travel_avoid_distance = 1
+cool_fan_full_layer = 2
+cool_min_layer_time_fan_speed_max = 15
+adhesion_type = brim
+brim_width = 8

resources/profiles/ultimaker2_olsson/0.4_high.curaprofile

@@ -5,39 +5,30 @@ machine_type = ultimaker2_olsson
 machine_variant = 0.4 mm
 
 [settings]
-retraction_combing = All
-top_thickness = 0.72
-speed_layer_0 = 20
-speed_print = 30
-speed_wall_0 = 30
-raft_interface_line_spacing = 3.0
-shell_thickness = 1.05
-infill_overlap = 15
-retraction_hop = 0.0
-skin_no_small_gaps_heuristic = False
-retraction_speed = 40.0
-raft_surface_line_width = 0.4
-raft_base_line_width = 1.0
-raft_margin = 5.0
-adhesion_type = brim
-skirt_minimal_length = 150.0
-layer_height = 0.06
-brim_line_count = 22
-infill_before_walls = False
-raft_surface_thickness = 0.27
-raft_airgap = 0.0
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
-speed_topbottom = 20
-support_pattern = lines
-layer_height_0 = 0.26
-infill_sparse_density = 22
-top_bottom_thickness = 0.72
-speed_infill = 50
-magic_mesh_surface_mode = False
-bottom_thickness = 0.72
-speed_wall_x = 40
 machine_nozzle_size = 0.35
-raft_surface_line_spacing = 3.0
+layer_height = 0.06
-support_enable = False
+layer_height_0 = 0.26
-
+shell_thickness = 1.05
+top_bottom_thickness = 0.84
+travel_compensate_overlapping_walls_enabled = True
+skin_no_small_gaps_heuristic = False
+top_bottom_pattern = lines
+infill_sparse_density = 22
+infill_overlap = 0.035
+infill_wipe_dist = 0.2
+retraction_amount = 5.5
+retraction_min_travel = 0.5
+retraction_count_max = 30
+retraction_extrusion_window = 6
+speed_infill = 50
+speed_wall_0 = 30
+speed_wall_x = 40
+speed_topbottom = 20
+speed_layer_0 = 25
+skirt_speed = 25
+speed_slowdown_layers = 2
+travel_avoid_distance = 1
+cool_fan_full_layer = 2
+cool_min_layer_time_fan_speed_max = 15
+adhesion_type = brim
+brim_width = 8

resources/profiles/ultimaker2_olsson/0.4_normal.curaprofile

@@ -5,34 +5,30 @@ machine_type = ultimaker2_olsson
 machine_variant = 0.4 mm
 
 [settings]
-retraction_combing = All
-shell_thickness = 1.05
-speed_print = 30
-speed_wall_0 = 30
-raft_interface_line_spacing = 3.0
-speed_layer_0 = 20
-layer_height_0 = 0.26
-retraction_hop = 0.0
-skirt_gap = 3.0
-retraction_speed = 40.0
-raft_surface_line_width = 0.4
-raft_base_line_width = 1.0
-raft_margin = 5.0
-adhesion_type = brim
-skirt_minimal_length = 150.0
-brim_line_count = 22
-infill_before_walls = False
-raft_surface_thickness = 0.27
-raft_airgap = 0.0
-infill_overlap = 15
-raft_interface_line_width = 0.4
-speed_topbottom = 20
-support_pattern = lines
-speed_infill = 50
-skin_no_small_gaps_heuristic = False
-magic_mesh_surface_mode = False
-speed_wall_x = 40
 machine_nozzle_size = 0.35
-raft_surface_line_spacing = 3.0
+layer_height = 0.1
-support_enable = False
+layer_height_0 = 0.26
-
+shell_thickness = 1.05
+top_bottom_thickness = 0.8
+travel_compensate_overlapping_walls_enabled = True
+skin_no_small_gaps_heuristic = False
+top_bottom_pattern = lines
+infill_sparse_density = 20
+infill_overlap = 0.035
+infill_wipe_dist = 0.2
+retraction_amount = 5.5
+retraction_min_travel = 0.5
+retraction_count_max = 30
+retraction_extrusion_window = 6
+speed_infill = 50
+speed_wall_0 = 30
+speed_wall_x = 40
+speed_topbottom = 20
+speed_layer_0 = 25
+skirt_speed = 25
+speed_slowdown_layers = 2
+travel_avoid_distance = 1
+cool_fan_full_layer = 2
+cool_min_layer_time_fan_speed_max = 15
+adhesion_type = brim
+brim_width = 8

resources/profiles/ultimaker2_olsson/0.4_ulti.curaprofile

@@ -0,0 +1,34 @@
+[general]
+version = 1
+name = Ulti Quality
+machine_type = ultimaker2_olsson
+machine_variant = 0.4 mm
+
+[settings]
+machine_nozzle_size = 0.35
+layer_height = 0.04
+layer_height_0 = 0.26
+shell_thickness = 1.4
+top_bottom_thickness = 1.12
+travel_compensate_overlapping_walls_enabled = True
+skin_no_small_gaps_heuristic = False
+top_bottom_pattern = lines
+infill_sparse_density = 25
+infill_overlap = 0.035
+infill_wipe_dist = 0.2
+retraction_amount = 5.5
+retraction_min_travel = 0.5
+retraction_count_max = 30
+retraction_extrusion_window = 6
+speed_infill = 50
+speed_wall_0 = 30
+speed_wall_x = 40
+speed_topbottom = 20
+speed_layer_0 = 25
+skirt_speed = 25
+speed_slowdown_layers = 2
+travel_avoid_distance = 1
+cool_fan_full_layer = 2
+cool_min_layer_time_fan_speed_max = 15
+adhesion_type = brim
+brim_width = 8

resources/profiles/ultimaker2_olsson/0.6_normal.curaprofile

@@ -5,38 +5,30 @@ machine_type = ultimaker2_olsson
 machine_variant = 0.6 mm
 
 [settings]
-retraction_combing = All
-top_thickness = 1.2
-speed_layer_0 = 20
-speed_print = 25
-speed_wall_0 = 25
-raft_interface_line_spacing = 3.0
-shell_thickness = 1.59
-infill_overlap = 15
-retraction_hop = 0.0
-skin_no_small_gaps_heuristic = False
-retraction_speed = 40.0
-raft_surface_line_width = 0.4
-raft_base_line_width = 1.0
-raft_margin = 5.0
-adhesion_type = brim
-skirt_minimal_length = 150.0
-layer_height = 0.15
-brim_line_count = 15
-infill_before_walls = False
-raft_surface_thickness = 0.27
-raft_airgap = 0.0
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
-speed_topbottom = 20
-support_pattern = lines
-layer_height_0 = 0.39
-top_bottom_thickness = 1.2
-speed_infill = 55
-magic_mesh_surface_mode = False
-bottom_thickness = 1.2
-speed_wall_x = 40
 machine_nozzle_size = 0.53
-raft_surface_line_spacing = 3.0
+layer_height = 0.15
-support_enable = False
+layer_height_0 = 0.4
-
+shell_thickness = 1.59
+top_bottom_thickness = 1.2
+travel_compensate_overlapping_walls_enabled = True
+skin_no_small_gaps_heuristic = False
+top_bottom_pattern = lines
+infill_sparse_density = 20
+infill_overlap = 0.053
+infill_wipe_dist = 0.3
+retraction_amount = 6
+retraction_min_travel = 0.5
+retraction_count_max = 30
+retraction_extrusion_window = 6
+speed_infill = 55
+speed_wall_0 = 25
+speed_wall_x = 40
+speed_topbottom = 20
+speed_layer_0 = 25
+skirt_speed = 25
+speed_slowdown_layers = 2
+travel_avoid_distance = 1.2
+cool_fan_full_layer = 2
+cool_min_layer_time_fan_speed_max = 20
+adhesion_type = brim
+brim_width = 7

resources/profiles/ultimaker2_olsson/0.8_normal.curaprofile

@@ -5,38 +5,30 @@ machine_type = ultimaker2_olsson
 machine_variant = 0.8 mm
 
 [settings]
-retraction_combing = All
-top_thickness = 1.2
-speed_layer_0 = 20
-speed_print = 20
-speed_wall_0 = 25
-raft_interface_line_spacing = 3.0
-shell_thickness = 2.1
-infill_overlap = 15
-retraction_hop = 0.0
-skin_no_small_gaps_heuristic = False
-retraction_speed = 40.0
-raft_surface_line_width = 0.4
-raft_base_line_width = 1.0
-raft_margin = 5.0
-adhesion_type = brim
-skirt_minimal_length = 150.0
-layer_height = 0.2
-brim_line_count = 11
-infill_before_walls = False
-raft_surface_thickness = 0.27
-raft_airgap = 0.0
-skirt_gap = 3.0
-raft_interface_line_width = 0.4
-speed_topbottom = 20
-support_pattern = lines
-layer_height_0 = 0.5
-top_bottom_thickness = 1.2
-speed_infill = 40
-magic_mesh_surface_mode = False
-bottom_thickness = 1.2
-speed_wall_x = 30
 machine_nozzle_size = 0.7
-raft_surface_line_spacing = 3.0
+layer_height = 0.2
-support_enable = False
+layer_height_0 = 0.5
-
+shell_thickness = 2.1
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_enabled = True
+skin_no_small_gaps_heuristic = False
+top_bottom_pattern = lines
+infill_sparse_density = 20
+infill_overlap = 0.07
+infill_wipe_dist = 0.4
+retraction_amount = 6
+retraction_min_travel = 0.5
+retraction_count_max = 30
+retraction_extrusion_window = 6
+speed_infill = 40
+speed_wall_0 = 20
+speed_wall_x = 30
+speed_topbottom = 20
+speed_layer_0 = 25
+skirt_speed = 25
+speed_slowdown_layers = 2
+travel_avoid_distance = 1.6
+cool_fan_full_layer = 2
+cool_min_layer_time_fan_speed_max = 25
+adhesion_type = brim
+brim_width = 7