Update PVA profiles

These updates bring different speeds for support-top vs. support-bottom, and changes the bottom pattern now that they are separately configurable. I also sorted the BB0.8 variant alphabetically (raft settings were out of place).

resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg

@@ -11,10 +11,6 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_support_infill = =acceleration_support
-jerk_support = =math.ceil(jerk_print * 5 / 25)
-jerk_support_infill = =jerk_support
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 skin_overlap = 20
@@ -24,4 +20,3 @@ speed_support_interface = =math.ceil(speed_support * 20 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
 acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
 support_xy_distance = =round(line_width * 1.5, 2)
-

resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg

@@ -11,10 +11,6 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_support_infill = =acceleration_support
-jerk_support = =math.ceil(jerk_print * 5 / 25)
-jerk_support_infill = =jerk_support
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 skin_overlap = 15

resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg

@@ -11,10 +11,6 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_support_infill = =acceleration_support
-jerk_support = =math.ceil(jerk_print * 5 / 25)
-jerk_support_infill = =jerk_support
 support_infill_rate = 25
 support_interface_height = 0.8
 material_standby_temperature = 100
@@ -23,4 +19,3 @@ speed_support_interface = =math.ceil(speed_support * 20 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
 acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
 support_xy_distance = =round(line_width * 1.5, 2)
-

resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg

@@ -11,10 +11,6 @@ material = generic_pva_ultimaker3_BB_0.4
 setting_version = 1
 
 [values]
-acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_support_infill = =acceleration_support
-jerk_support = =math.ceil(jerk_print * 5 / 25)
-jerk_support_infill = =jerk_support
 support_infill_rate = 25
 support_interface_height = 0.8
 material_standby_temperature = 100

resources/variants/ultimaker3_bb0.8.inst.cfg

@@ -11,7 +11,9 @@ setting_version = 1
 [values]
 acceleration_enabled = True
 acceleration_print = 4000
-acceleration_support_interface = =math.ceil(acceleration_topbottom * 100 / 500)
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
+acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 brim_width = 3
 cool_fan_speed = 50
 cool_min_speed = 5
@@ -21,7 +23,9 @@ infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
 jerk_print = 25
-jerk_support_interface = =math.ceil(jerk_topbottom * 1 / 5)
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
+jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
 machine_nozzle_heat_up_speed = 1.5
@@ -54,14 +58,18 @@ retraction_prime_speed = 15
 skin_overlap = 5
 speed_layer_0 = 20
 speed_print = 35
-speed_support_interface = =math.ceil(speed_topbottom * 15 / 20)
+speed_support = =math.ceil(speed_print * 25 / 35)
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_angle = 60
 support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
 support_bottom_stair_step_height = =layer_height
 support_infill_rate = 25
 support_interface_enable = True
 support_interface_height = =layer_height * 5
+support_interface_skip_height = =layer_height
 support_join_distance = 3
 support_line_width = =round(line_width * 0.4 / 0.35, 2)
 support_offset = 1.5

resources/variants/ultimaker3_bb04.inst.cfg

@@ -9,22 +9,32 @@ type = variant
 setting_version = 1
 
 [values]
+acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
+acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
+acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 cool_fan_speed_max = =cool_fan_speed
+jerk_support = =math.ceil(jerk_print * 15 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
+jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)
 machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = 215
+raft_base_speed = 20
+raft_interface_speed = 20
+raft_speed = 25
 retraction_extrusion_window = =retraction_amount
 speed_layer_0 = 20
+speed_support = =math.ceil(speed_print * 25 / 35)
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_bottom_height = =layer_height * 2
+support_bottom_pattern = zigzag
 support_bottom_stair_step_height = =layer_height
-raft_interface_speed = 20
-raft_base_speed = 20
 support_infill_rate = 25
 support_interface_enable = True
+support_interface_skip_height = =layer_height
 support_join_distance = 3
 support_line_width = =round(line_width * 0.4 / 0.35, 2)
 support_offset = 3
 support_xy_distance = =wall_line_width_0 * 3
 support_xy_distance_overhang = =wall_line_width_0 / 2
-raft_speed = 25
-