From 30e14478af9cd141ab6c08e609d73cf62ea99408 Mon Sep 17 00:00:00 2001 From: Arjen Hiemstra Date: Tue, 25 Oct 2016 15:40:52 +0200 Subject: [PATCH] Replace quality profiles with optimised versions of Ruben's script With the global quality profiles merged this now works properly. CURA-2645 --- resources/definitions/ultimaker3.def.json | 93 +++++++++- .../um3_aa0.4_ABS_Draft_Print.inst.cfg | 148 +++------------- .../um3_aa0.4_ABS_Fast_Print.inst.cfg | 148 +++------------- .../um3_aa0.4_ABS_High_Quality.inst.cfg | 146 +++------------- .../um3_aa0.4_ABS_Normal_Quality.inst.cfg | 146 +++------------- .../um3_aa0.4_CPE_Draft_Print.inst.cfg | 147 +++------------- .../um3_aa0.4_CPE_Fast_Print.inst.cfg | 146 +++------------- .../um3_aa0.4_CPE_High_Quality.inst.cfg | 146 +++------------- .../um3_aa0.4_CPE_Normal_Quality.inst.cfg | 146 +++------------- .../um3_aa0.4_Nylon_Draft_Print.inst.cfg | 161 ++++-------------- .../um3_aa0.4_Nylon_Fast_Print.inst.cfg | 159 ++++------------- .../um3_aa0.4_Nylon_High_Quality.inst.cfg | 158 ++++------------- .../um3_aa0.4_Nylon_Normal_Quality.inst.cfg | 158 ++++------------- .../um3_aa0.4_PLA_Draft_Print.inst.cfg | 149 +++------------- .../um3_aa0.4_PLA_Fast_Print.inst.cfg | 148 +++------------- .../um3_aa0.4_PLA_High_Quality.inst.cfg | 149 +++------------- .../um3_aa0.4_PLA_Normal_Quality.inst.cfg | 147 +++------------- ...3_aa0.4_PVA_Not_Supported_Quality.inst.cfg | 113 ------------ ...3_bb0.4_ABS_Not_Supported_Quality.inst.cfg | 113 ------------ ...3_bb0.4_CPE_Not_Supported_Quality.inst.cfg | 113 ------------ ...bb0.4_Nylon_Not_Supported_Quality.inst.cfg | 113 ------------ ...3_bb0.4_PLA_Not_Supported_Quality.inst.cfg | 114 ------------- .../um3_bb0.4_PVA_Draft_Print.inst.cfg | 142 ++------------- .../um3_bb0.4_PVA_Fast_Print.inst.cfg | 141 ++------------- .../um3_bb0.4_PVA_High_Quality.inst.cfg | 141 ++------------- .../um3_bb0.4_PVA_Normal_Quality.inst.cfg | 141 ++------------- resources/variants/ultimaker3_aa04.inst.cfg | 34 +++- resources/variants/ultimaker3_bb04.inst.cfg | 16 +- .../ultimaker3_extended_aa04.inst.cfg | 31 ++++ .../ultimaker3_extended_bb04.inst.cfg | 16 ++ 30 files changed, 644 insertions(+), 3079 deletions(-) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 390d9e51a9..8be8751d68 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -38,8 +38,8 @@ "machine_depth": { "default_value": 215 }, "machine_height": { "default_value": 200 }, "machine_heated_bed": { "default_value": true }, - "machine_nozzle_heat_up_speed": { "default_value": 0.8 }, - "machine_nozzle_cool_down_speed": { "default_value": 1 }, + "machine_nozzle_heat_up_speed": { "default_value": 1.4 }, + "machine_nozzle_cool_down_speed": { "default_value": 0.8 }, "machine_head_with_fans_polygon": { "default_value": @@ -50,14 +50,12 @@ [ 60, -30 ] ] }, - "machine_center_is_zero": { "default_value": false }, "machine_gcode_flavor": { "default_value": "Griffin" }, "machine_max_feedrate_x": { "default_value": 300 }, "machine_max_feedrate_y": { "default_value": 300 }, "machine_max_feedrate_z": { "default_value": 40 }, "machine_acceleration": { "default_value": 3000 }, "gantry_height": { "default_value": 60 }, - "machine_use_extruder_offset_to_offset_coords": { "default_value": true }, "machine_disallowed_areas": { "default_value": [ [[-91.5, -115], [-115, -115], [-115, -104.6], [-91.5, -104.6]], [[-99.5, -104.6], [-115, -104.6], [-115, 104.6], [-99.5, 104.6]], @@ -69,16 +67,93 @@ [[100.5, -54.5], [100.5, 99.3], [115, 99.3], [115, -54.5]], [[77, 99.3], [77, 115], [115, 115], [115, 99.3]] ]}, - "machine_show_variants": { "default_value": true }, "machine_extruder_count": { "default_value": 2 }, - "print_sequence": {"enabled": false}, "extruder_prime_pos_abs": { "default_value": true }, - "extruder_prime_pos_x": { "enabled": false }, - "extruder_prime_pos_y": { "enabled": false }, "machine_start_gcode": { "default_value": "" }, "machine_end_gcode": { "default_value": "" }, "prime_tower_position_x": { "default_value": 175 }, "prime_tower_position_y": { "default_value": 179 }, - "speed_prime_tower": { "default_value": 30 } + + "extruder_prime_pos_x": { "enabled": false }, + "extruder_prime_pos_y": { "enabled": false }, + "print_sequence": {"enabled": false}, + + "acceleration_enabled": { "value": "True" }, + "acceleration_layer_0": { "value": "acceleration_topbottom" }, + "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, + "acceleration_print": { "value": "4000" }, + "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, + "acceleration_support_interface": { "value": "acceleration_topbottom" }, + "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 500 / 4000)" }, + "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" }, + "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" }, + "brim_width": { "value": "3" }, + "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" }, + "cool_fan_speed": { "value": "50" }, + "cool_fan_speed_max": { "value": "100" }, + "cool_min_speed": { "value": "5" }, + "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, + "infill_overlap": { "value": "0" }, + "infill_pattern": { "value": "'triangles'" }, + "infill_wipe_dist": { "value": "0" }, + "jerk_enabled": { "value": "True" }, + "jerk_layer_0": { "value": "jerk_topbottom" }, + "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_print": { "value": "25" }, + "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_support_interface": { "value": "jerk_topbottom" }, + "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, + "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, + "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, + "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" }, + "line_width": { "value": "machine_nozzle_size * 0.875" }, + "machine_min_cool_heat_time_window": { "value": "15" }, + "material_print_temperature": { "value": "200" }, + "material_standby_temperature": { "value": "100" }, + "multiple_mesh_overlap": { "value": "0" }, + "prime_tower_enable": { "value": "True" }, + "raft_airgap": { "value": "0" }, + "raft_base_speed": { "value": "20" }, + "raft_base_thickness": { "value": "0.3" }, + "raft_interface_line_spacing": { "value": "0.5" }, + "raft_interface_line_width": { "value": "0.5" }, + "raft_interface_speed": { "value": "20" }, + "raft_interface_thickness": { "value": "0.2" }, + "raft_jerk": { "value": "jerk_layer_0" }, + "raft_margin": { "value": "10" }, + "raft_speed": { "value": "25" }, + "raft_surface_layers": { "value": "1" }, + "retraction_amount": { "value": "2" }, + "retraction_count_max": { "value": "10" }, + "retraction_extrusion_window": { "value": "1" }, + "retraction_hop": { "value": "2" }, + "retraction_hop_enabled": { "value": "True" }, + "retraction_hop_only_when_collides": { "value": "True" }, + "retraction_min_travel": { "value": "5" }, + "retraction_prime_speed": { "value": "15" }, + "skin_overlap": { "value": "10" }, + "speed_layer_0": { "value": "20" }, + "speed_prime_tower": { "value": "speed_topbottom" }, + "speed_print": { "value": "35" }, + "speed_support": { "value": "speed_wall_0" }, + "speed_support_interface": { "value": "speed_topbottom" }, + "speed_topbottom": { "value": "math.ceil(speed_print * 20 / 35)" }, + "speed_travel": { "value": "250" }, + "speed_wall": { "value": "math.ceil(speed_print * 30 / 35)" }, + "speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" }, + "speed_wall_x": { "value": "speed_wall" }, + "support_angle": { "value": "45" }, + "support_pattern": { "value": "'triangles'" }, + "support_use_towers": { "value": "False" }, + "support_xy_distance": { "value": "wall_line_width_0 * 2.5" }, + "support_xy_distance_overhang": { "value": "wall_line_width_0" }, + "support_z_distance": { "value": "0" }, + "switch_extruder_prime_speed": { "value": "15" }, + "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_thickness": { "value": "1" }, + "travel_avoid_distance": { "value": "3" }, + "wall_0_inset": { "value": "0" }, + "wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" }, + "wall_thickness": { "value": "1" } } } diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index 4fcedc258a..6a1b477165 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -1,125 +1,23 @@ -[general] -version = 2 -name = Draft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = draft -material = generic_abs_ultimaker3_AA_0.4 -weight = -2 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 5 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = 240 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 16 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -raft_base_speed = =0.75 * raft_speed -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 20 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 60 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 35 / 60) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 45 / 60) -speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Draft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = draft +material = generic_abs_ultimaker3_AA_0.4 +weight = -2 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = 240 +prime_tower_size = 16 +skin_overlap = 20 +speed_print = 60 +speed_topbottom = =math.ceil(speed_print * 35 / 60) +speed_wall = =math.ceil(speed_print * 45 / 60) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +wall_thickness = 1 + diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index ef4122439d..3b5d37024d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -1,125 +1,23 @@ -[general] -version = 2 -name = Fast Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = fast -material = generic_abs_ultimaker3_AA_0.4 -weight = -1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 5 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 7 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.15 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = 235 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 16 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 60 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 60) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 40 / 60) -speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Fast Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = fast +material = generic_abs_ultimaker3_AA_0.4 +weight = -1 + +[values] +cool_min_speed = 7 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = 235 +material_standby_temperature = 100 +prime_tower_size = 16 +speed_print = 60 +speed_topbottom = =math.ceil(speed_print * 30 / 60) +speed_wall = =math.ceil(speed_print * 40 / 60) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index 8e4b7ea767..dcb8e85563 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -1,125 +1,21 @@ -[general] -version = 2 -name = High Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = high -material = generic_abs_ultimaker3_AA_0.4 -weight = 1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 5 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.06 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = 225 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 16 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 50 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 50) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = High Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = high +material = generic_abs_ultimaker3_AA_0.4 +weight = 1 + +[values] +cool_min_speed = 12 +machine_nozzle_cool_down_speed = 0.8 +machine_nozzle_heat_up_speed = 1.5 +material_standby_temperature = 100 +prime_tower_size = 16 +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 30 / 50) + diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index 7e17443c2b..4e99ac446e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -1,125 +1,21 @@ -[general] -version = 2 -name = Normal Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = normal -material = generic_abs_ultimaker3_AA_0.4 -weight = 0 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 5 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = 230 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 16 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 55 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 55) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Normal Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = normal +material = generic_abs_ultimaker3_AA_0.4 +weight = 0 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = 230 +material_standby_temperature = 100 +prime_tower_size = 16 +speed_print = 55 +speed_topbottom = =math.ceil(speed_print * 30 / 55) +speed_wall = =math.ceil(speed_print * 30 / 55) + diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg index f08ff93edc..d7e0ed62b6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg @@ -1,125 +1,22 @@ -[general] -version = 2 -name = Draft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = draft -material = generic_cpe_ultimaker3_AA_0.4 -weight = -2 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 70 -material_print_temperature = 250 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 17 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 20 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 60 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 35 / 60) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 45 / 60) -speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Draft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = draft +material = generic_cpe_ultimaker3_AA_0.4 +weight = -2 + +[values] +material_print_temperature = 250 +material_standby_temperature = 100 +prime_tower_size = 17 +skin_overlap = 20 +speed_print = 60 +speed_topbottom = =math.ceil(speed_print * 35 / 60) +speed_wall = =math.ceil(speed_print * 45 / 60) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +wall_thickness = 1 + diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg index 32db69c965..5717bf50fe 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg @@ -1,125 +1,21 @@ -[general] -version = 2 -name = Fast Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = fast -material = generic_cpe_ultimaker3_AA_0.4 -weight = -1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 7 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.15 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 70 -material_print_temperature = 245 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 17 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 60 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 60) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 40 / 60) -speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Fast Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = fast +material = generic_cpe_ultimaker3_AA_0.4 +weight = -1 + +[values] +cool_min_speed = 7 +material_print_temperature = 245 +material_standby_temperature = 100 +prime_tower_size = 17 +speed_print = 60 +speed_topbottom = =math.ceil(speed_print * 30 / 60) +speed_wall = =math.ceil(speed_print * 40 / 60) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg index 205aa3da84..e058ef8cac 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg @@ -1,125 +1,21 @@ -[general] -version = 2 -name = High Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = high -material = generic_cpe_ultimaker3_AA_0.4 -weight = 1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.06 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 70 -material_print_temperature = 235 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 17 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 50 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 50) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 50) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = High Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = high +material = generic_cpe_ultimaker3_AA_0.4 +weight = 1 + +[values] +cool_min_speed = 12 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_standby_temperature = 100 +prime_tower_size = 17 +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 30 / 50) + diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg index 15bd999cf4..1ccd1c54d3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -1,125 +1,21 @@ -[general] -version = 2 -name = Normal Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = normal -material = generic_cpe_ultimaker3_AA_0.4 -weight = 0 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 70 -material_print_temperature = 240 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -prime_tower_enable = True -prime_tower_size = 17 -prime_tower_wipe_enabled = True -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 55 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 55) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Normal Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = normal +material = generic_cpe_ultimaker3_AA_0.4 +weight = 0 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = 240 +material_standby_temperature = 100 +prime_tower_size = 17 +speed_print = 55 +speed_topbottom = =math.ceil(speed_print * 30 / 55) +speed_wall = =math.ceil(speed_print * 30 / 55) + diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index 31287dd903..6685c7d79e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -1,127 +1,34 @@ -[general] -version = 2 -name = Draft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = draft -material = generic_nylon_ultimaker3_AA_0.4 -weight = -2 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = raft -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 40 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_layer_time_fan_speed_max = 20 -cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_overlap_mm = 0.05 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 60 -material_print_temperature = 255 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 40 -ooze_shield_dist = 2 -ooze_shield_enabled = False -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) -retraction_amount = 8 -retraction_count_max = 25 -retraction_extra_prime_amount = 0 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_speed = 25 -skin_overlap = 50 -speed_infill = =speed_print -speed_layer_0 = 10 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 70) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_prime_speed = 30 -switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_thickness = 1.3 - -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_surface_layers = 2 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') - -brim_width = 7 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -support_bottom_stair_step_height = 0.3 -wall_line_width_x = =wall_line_width - +[general] +version = 2 +name = Draft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = draft +material = generic_nylon_ultimaker3_AA_0.4 +weight = -2 + +[values] +adhesion_type = raft +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +infill_overlap_mm = 0.05 +line_width = =machine_nozzle_size +material_print_temperature = 255 +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = 10 +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index 23c71c6160..fb9425eeff 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -1,125 +1,34 @@ -[general] -version = 2 -name = Fast Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = fast -material = generic_nylon_ultimaker3_AA_0.4 -weight = -1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = raft -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 40 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_layer_time_fan_speed_max = 20 -cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_overlap_mm = 0.05 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.15 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 60 -material_print_temperature = 250 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 40 -ooze_shield_dist = 2 -ooze_shield_enabled = False -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) -retraction_amount = 8 -retraction_count_max = 25 -retraction_extra_prime_amount = 0 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_speed = 25 -skin_overlap = 50 -speed_infill = =speed_print -speed_layer_0 = 10 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 70) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_prime_speed = 30 -switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_surface_layers = 2 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') - -brim_width = 7 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -support_bottom_stair_step_height = 0.3 -wall_line_width_x = =wall_line_width +[general] +version = 2 +name = Fast Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = fast +material = generic_nylon_ultimaker3_AA_0.4 +weight = -1 + +[values] +adhesion_type = raft +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +infill_overlap_mm = 0.05 +line_width = =machine_nozzle_size +material_print_temperature = 250 +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = 10 +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index fd3ce07d37..80dfcd8035 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -1,125 +1,33 @@ -[general] -version = 2 -name = High Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = high -material = generic_nylon_ultimaker3_AA_0.4 -weight = 1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = raft -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 40 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_layer_time_fan_speed_max = 20 -cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_overlap_mm = 0.05 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.06 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 60 -material_print_temperature = 245 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 40 -ooze_shield_dist = 2 -ooze_shield_enabled = False -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) -retraction_amount = 8 -retraction_count_max = 25 -retraction_extra_prime_amount = 0 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_speed = 25 -skin_overlap = 50 -speed_infill = =speed_print -speed_layer_0 = 10 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 70) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_prime_speed = 30 -switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_surface_layers = 2 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') - -brim_width = 7 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -support_bottom_stair_step_height = 0.3 -wall_line_width_x = =wall_line_width +[general] +version = 2 +name = High Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = high +material = generic_nylon_ultimaker3_AA_0.4 +weight = 1 + +[values] +adhesion_type = raft +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 15 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +infill_overlap_mm = 0.05 +line_width = =machine_nozzle_size +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = 10 +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index 0146702c2e..428d5b2a3a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -1,125 +1,33 @@ -[general] -version = 2 -name = Normal Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = normal -material = generic_nylon_ultimaker3_AA_0.4 -weight = 0 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = raft -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 40 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_layer_time_fan_speed_max = 20 -cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_overlap_mm = 0.05 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 60 -material_print_temperature = 245 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 40 -ooze_shield_dist = 2 -ooze_shield_enabled = False -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) -retraction_amount = 8 -retraction_count_max = 25 -retraction_extra_prime_amount = 0 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_speed = 25 -skin_overlap = 50 -speed_infill = =speed_print -speed_layer_0 = 10 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 70) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_prime_speed = 30 -switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_surface_layers = 2 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') - -brim_width = 7 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -support_bottom_stair_step_height = 0.3 -wall_line_width_x = =wall_line_width +[general] +version = 2 +name = Normal Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = normal +material = generic_nylon_ultimaker3_AA_0.4 +weight = 0 + +[values] +adhesion_type = raft +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 12 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +infill_overlap_mm = 0.05 +line_width = =machine_nozzle_size +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = 10 +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 369997b009..6bc898446b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -1,125 +1,26 @@ -[general] -version = 2 -name = Draft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = draft -material = generic_pla_ultimaker3_AA_0.4 -weight = -2 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_bed_temperature = 60 -material_print_temperature = 205 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 15 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 20 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 35 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 50 / 70) -speed_wall_0 = =math.ceil(speed_wall * 35 / 50) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 +[general] +version = 2 +name = Draft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = draft +material = generic_pla_ultimaker3_AA_0.4 +weight = -2 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_fan_speed = 100 -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = 205 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 20 +speed_topbottom = =math.ceil(speed_print * 35 / 70) +speed_wall = =math.ceil(speed_print * 50 / 70) +speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +top_bottom_thickness = 1 +wall_thickness = 1 + diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index e9710301a8..3f2aa1e652 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -1,125 +1,25 @@ -[general] -version = 2 -name = Fast Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = fast -material = generic_pla_ultimaker3_AA_0.4 -weight = -1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.15 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_bed_temperature = 60 -material_print_temperature = 200 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 15 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 80 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 80) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 40 / 80) -speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 +[general] +version = 2 +name = Fast Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = fast +material = generic_pla_ultimaker3_AA_0.4 +weight = -1 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_fan_speed = 100 -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_standby_temperature = 100 +prime_tower_enable = False +speed_print = 80 +speed_topbottom = =math.ceil(speed_print * 30 / 80) +speed_wall = =math.ceil(speed_print * 40 / 80) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +top_bottom_thickness = 1 +wall_thickness = 1 + diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index 55b4986541..f71c51e7ff 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -1,125 +1,26 @@ -[general] -version = 2 -name = High Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = high -material = generic_pla_ultimaker3_AA_0.4 -weight = 1 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_min_layer_time = 5 -cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.06 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_bed_temperature = 60 -material_print_temperature = 195 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 10 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 60 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 60) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 60) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 +[general] +version = 2 +name = High Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = high +material = generic_pla_ultimaker3_AA_0.4 +weight = 1 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_fan_speed = 100 -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +cool_min_speed = 10 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = 195 +material_standby_temperature = 100 +skin_overlap = 10 +speed_print = 60 +speed_topbottom = =math.ceil(speed_print * 30 / 60) +speed_wall = =math.ceil(speed_print * 30 / 60) +top_bottom_thickness = 1 +wall_thickness = 1 + diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index 6800bcfb4e..84d9a5a001 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -1,126 +1,23 @@ -[general] -version = 2 -name = Normal Quality -definition = ultimaker3 - -[metadata] -type = quality -quality_type = normal -material = generic_pla_ultimaker3_AA_0.4 -weight = 0 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_min_layer_time = 5 -cool_min_speed = 7 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_bed_temperature = 60 -material_print_temperature = 200 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 15 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 10 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 70) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 - -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 +[general] +version = 2 +name = Normal Quality +definition = ultimaker3 + +[metadata] +type = quality +quality_type = normal +material = generic_pla_ultimaker3_AA_0.4 +weight = 0 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_fan_speed = 100 -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 +cool_min_speed = 7 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 10 +top_bottom_thickness = 1 +wall_thickness = 1 + diff --git a/resources/quality/ultimaker3/um3_aa0.4_PVA_Not_Supported_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PVA_Not_Supported_Quality.inst.cfg index 97c0c35f0f..5076c4164a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PVA_Not_Supported_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PVA_Not_Supported_Quality.inst.cfg @@ -11,116 +11,3 @@ material = generic_pva_ultimaker3_AA_0.4 supported = false [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 3 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = 215 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_speed = 25 -raft_surface_layers = 1 -retraction_amount = 2 -retraction_count_max = 10 -retraction_extrusion_window = =retraction_amount -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_min_travel = 5 -retraction_prime_speed = 15 -skin_overlap = 10 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 35 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 20 / 35) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 35) -speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall -support_angle = 45 -support_bottom_height = =layer_height * 2 -support_bottom_stair_step_height = =layer_height -support_infill_rate = 30 -support_interface_enable = True -support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) -support_offset = 3 -support_pattern = triangles -support_use_towers = False -support_xy_distance = =wall_line_width_0 * 3 -support_xy_distance_overhang = =wall_line_width_0 / 2 -support_z_distance = 0 -switch_extruder_prime_speed = 15 -switch_extruder_retraction_amount = 8 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 - -support_top_distance = =support_z_distance -support_bottom_distance = =support_z_distance / 2 -raft_surface_thickness = =resolveOrValue('layer_height') -cool_fan_speed_max = =cool_fan_speed - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -material_bed_temperature = 60 -ooze_shield_dist = 2 -retraction_speed = 25 -switch_extruder_retraction_speeds = 20 diff --git a/resources/quality/ultimaker3/um3_bb0.4_ABS_Not_Supported_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_ABS_Not_Supported_Quality.inst.cfg index 9a8e3b4d9a..0a00e9e09b 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_ABS_Not_Supported_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_ABS_Not_Supported_Quality.inst.cfg @@ -11,116 +11,3 @@ weight = 0 supported = false [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 80 -material_print_temperature = 230 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 16 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 55 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 55) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 diff --git a/resources/quality/ultimaker3/um3_bb0.4_CPE_Not_Supported_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_CPE_Not_Supported_Quality.inst.cfg index 5ea6e1edeb..17c10b7a72 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_CPE_Not_Supported_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_CPE_Not_Supported_Quality.inst.cfg @@ -11,116 +11,3 @@ weight = 0 supported = false [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.85 -machine_nozzle_heat_up_speed = 1.5 -material_bed_temperature = 70 -material_print_temperature = 240 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 17 -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 55 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 55) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 55) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 diff --git a/resources/quality/ultimaker3/um3_bb0.4_Nylon_Not_Supported_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_Nylon_Not_Supported_Quality.inst.cfg index 1d7f49caf2..c562e16a8e 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_Nylon_Not_Supported_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_Nylon_Not_Supported_Quality.inst.cfg @@ -11,116 +11,3 @@ weight = 0 supported = false [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = raft -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 40 -cool_fan_speed_max = 100 -cool_min_layer_time = 5 -cool_min_layer_time_fan_speed_max = 20 -cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_overlap_mm = 0.05 -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.9 -machine_nozzle_heat_up_speed = 1.4 -material_bed_temperature = 60 -material_print_temperature = 245 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 40 -ooze_shield_dist = 2 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) -raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) -retraction_amount = 8 -retraction_count_max = 25 -retraction_extra_prime_amount = 0 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_speed = 25 -skin_overlap = 50 -speed_infill = =speed_print -speed_layer_0 = 10 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 70) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -switch_extruder_prime_speed = 30 -switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 -top_bottom_thickness = 1.2 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_thickness = 1.3 -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_surface_layers = 2 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') - -brim_width = 7 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -support_bottom_stair_step_height = 0.3 -wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker3/um3_bb0.4_PLA_Not_Supported_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PLA_Not_Supported_Quality.inst.cfg index af8135af19..b9a64bca38 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PLA_Not_Supported_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PLA_Not_Supported_Quality.inst.cfg @@ -11,117 +11,3 @@ weight = 0 supported = false [values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_min_layer_time = 5 -cool_min_speed = 7 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.75 -machine_nozzle_heat_up_speed = 1.6 -material_bed_temperature = 60 -material_print_temperature = 200 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -prime_tower_enable = False -prime_tower_size = 15 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_wipe_enabled = True -raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 -raft_speed = =speed_print / 60 * 30 -raft_interface_speed = =raft_speed * 0.75 -raft_base_speed = =0.75 * raft_speed -raft_acceleration = =acceleration_print -raft_jerk = =jerk_print -retraction_count_max = 25 -retraction_extrusion_window = 1 -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -skin_overlap = 10 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 70 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 30 / 70) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 70) -speed_wall_0 = =math.ceil(speed_wall * 20 / 30) -speed_wall_x = =speed_wall -support_angle = 60 -support_bottom_distance = =support_z_distance / 2 -support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 -support_z_distance = =layer_height * 2 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 - -support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -cool_fan_speed_max = =cool_fan_speed -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') -retraction_amount = 6.5 - -cool_fan_speed = 100 -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_min_travel = =line_width * 2 -retraction_prime_speed = =retraction_speed -retraction_speed = 25 -support_bottom_stair_step_height = 0.3 -switch_extruder_prime_speed = =switch_extruder_retraction_speeds -switch_extruder_retraction_amount = =machine_heat_zone_length -switch_extruder_retraction_speeds = 20 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index 86c97c9df3..7b6997c18b 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -1,126 +1,16 @@ -[general] -version = 2 -name = Draft Print -definition = ultimaker3 - -[metadata] -type = quality -quality_type = draft -weight = -2 -material = generic_pva_ultimaker3_BB_0.4 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 3 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = 225 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_speed = 25 -raft_surface_layers = 1 -retraction_amount = 2 -retraction_count_max = 10 -retraction_extrusion_window = =retraction_amount -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_min_travel = 5 -retraction_prime_speed = 15 -skin_overlap = 20 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 35 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 20 / 35) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 35) -speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall -support_angle = 45 -support_bottom_height = =layer_height * 2 -support_bottom_stair_step_height = =layer_height -support_infill_rate = 25 -support_interface_enable = True -support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) -support_offset = 3 -support_pattern = triangles -support_use_towers = False -support_xy_distance = =wall_line_width_0 * 3 -support_xy_distance_overhang = =wall_line_width_0 / 2 -support_z_distance = 0 -switch_extruder_prime_speed = 15 -switch_extruder_retraction_amount = 8 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 - -support_top_distance = =support_z_distance -support_bottom_distance = =support_z_distance / 2 -raft_surface_thickness = =resolveOrValue('layer_height') -cool_fan_speed_max = =cool_fan_speed - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -material_bed_temperature = 60 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_speed = 25 -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Draft Print +definition = ultimaker3 + +[metadata] +type = quality +quality_type = draft +weight = -2 +material = generic_pva_ultimaker3_BB_0.4 + +[values] +material_print_temperature = 225 +material_standby_temperature = 100 +skin_overlap = 20 + diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index 72d008e834..10b06cc61b 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -1,125 +1,16 @@ -[general] -version = 2 -name = Fast Print -definition = ultimaker3 - -[metadata] -weight = -1 -type = quality -quality_type = fast -material = generic_pva_ultimaker3_BB_0.4 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 3 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.15 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = 220 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_speed = 25 -raft_surface_layers = 1 -retraction_amount = 2 -retraction_count_max = 10 -retraction_extrusion_window = =retraction_amount -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_min_travel = 5 -retraction_prime_speed = 15 -skin_overlap = 15 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 35 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 20 / 35) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 35) -speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall -support_angle = 45 -support_bottom_height = =layer_height * 2 -support_bottom_stair_step_height = =layer_height -support_infill_rate = 25 -support_interface_enable = True -support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) -support_offset = 3 -support_pattern = triangles -support_use_towers = False -support_xy_distance = =wall_line_width_0 * 3 -support_xy_distance_overhang = =wall_line_width_0 / 2 -support_z_distance = 0 -switch_extruder_prime_speed = 15 -switch_extruder_retraction_amount = 8 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 -support_top_distance = =support_z_distance -support_bottom_distance = =support_z_distance / 2 -raft_surface_thickness = =resolveOrValue('layer_height') -cool_fan_speed_max = =cool_fan_speed - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -material_bed_temperature = 60 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_speed = 25 -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Fast Print +definition = ultimaker3 + +[metadata] +weight = -1 +type = quality +quality_type = fast +material = generic_pva_ultimaker3_BB_0.4 + +[values] +material_print_temperature = 220 +material_standby_temperature = 100 +skin_overlap = 15 + diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index 0762badf14..a6fb178a22 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -1,126 +1,15 @@ -[general] -version = 2 -name = High Quality -definition = ultimaker3 - -[metadata] -weight = 0 -type = quality -quality_type = high -material = generic_pva_ultimaker3_BB_0.4 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 3 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.06 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = 215 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_speed = 25 -raft_surface_layers = 1 -retraction_amount = 2 -retraction_count_max = 10 -retraction_extrusion_window = =retraction_amount -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_min_travel = 5 -retraction_prime_speed = 15 -skin_overlap = 10 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 35 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 20 / 35) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 35) -speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall -support_angle = 45 -support_bottom_height = =layer_height * 2 -support_bottom_stair_step_height = =layer_height -support_infill_rate = 35 -support_interface_enable = True -support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) -support_offset = 3 -support_pattern = triangles -support_use_towers = False -support_xy_distance = =wall_line_width_0 * 3 -support_xy_distance_overhang = =wall_line_width_0 / 2 -support_z_distance = 0 -switch_extruder_prime_speed = 15 -switch_extruder_retraction_amount = 8 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 - -support_top_distance = =support_z_distance -support_bottom_distance = =support_z_distance / 2 -raft_surface_thickness = =resolveOrValue('layer_height') -cool_fan_speed_max = =cool_fan_speed - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -material_bed_temperature = 60 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_speed = 25 -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = High Quality +definition = ultimaker3 + +[metadata] +weight = 0 +type = quality +quality_type = high +material = generic_pva_ultimaker3_BB_0.4 + +[values] +support_infill_rate = 35 +material_standby_temperature = 100 + diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index 92f829080c..dd4157c695 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -1,126 +1,15 @@ -[general] -version = 2 -name = Normal Quality -definition = ultimaker3 - -[metadata] -weight = 0 -type = quality -quality_type = normal -material = generic_pva_ultimaker3_BB_0.4 - -[values] -acceleration_enabled = True -acceleration_infill = =acceleration_print -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) -acceleration_wall_x = =acceleration_wall -adhesion_type = brim -brim_width = 3 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height -cool_fan_speed = 50 -cool_min_layer_time = 5 -cool_min_speed = 5 -infill_line_width = =round(line_width * 0.5 / 0.35, 2) -infill_pattern = triangles -infill_sparse_density = 20 -infill_wipe_dist = 0 -jerk_enabled = True -jerk_infill = =jerk_print -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) -jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_topbottom -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) -jerk_wall_x = =jerk_wall -layer_height = 0.1 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 -machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.8 -machine_nozzle_heat_up_speed = 1.5 -material_print_temperature = 215 -material_standby_temperature = 100 -multiple_mesh_overlap = 0 -ooze_shield_angle = 60 -ooze_shield_enabled = False -prime_tower_enable = True -prime_tower_size = 15 -prime_tower_wipe_enabled = True -raft_acceleration = =acceleration_layer_0 -raft_airgap = 0 -raft_base_speed = 20 -raft_base_thickness = 0.3 -raft_interface_line_spacing = 0.5 -raft_interface_line_width = 0.5 -raft_interface_speed = 20 -raft_interface_thickness = 0.2 -raft_jerk = =jerk_layer_0 -raft_margin = 10 -raft_speed = 25 -raft_surface_layers = 1 -retraction_amount = 2 -retraction_count_max = 10 -retraction_extrusion_window = =retraction_amount -retraction_hop = 2 -retraction_hop_enabled = True -retraction_hop_only_when_collides = True -retraction_min_travel = 5 -retraction_prime_speed = 15 -skin_overlap = 10 -speed_infill = =speed_print -speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom -speed_print = 35 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom -speed_topbottom = =math.ceil(speed_print * 20 / 35) -speed_travel = 250 -speed_wall = =math.ceil(speed_print * 30 / 35) -speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall -support_angle = 45 -support_bottom_height = =layer_height * 2 -support_bottom_stair_step_height = =layer_height -support_infill_rate = 30 -support_interface_enable = True -support_join_distance = 3 -support_line_width = =round(line_width * 0.4 / 0.35, 2) -support_offset = 3 -support_pattern = triangles -support_use_towers = False -support_xy_distance = =wall_line_width_0 * 3 -support_xy_distance_overhang = =wall_line_width_0 / 2 -support_z_distance = 0 -switch_extruder_prime_speed = 15 -switch_extruder_retraction_amount = 8 -top_bottom_thickness = 1 -travel_avoid_distance = 3 -travel_compensate_overlapping_walls_enabled = True -wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.3 / 0.35, 2) -wall_thickness = 1 - -support_top_distance = =support_z_distance -support_bottom_distance = =support_z_distance / 2 -raft_surface_thickness = =resolveOrValue('layer_height') -cool_fan_speed_max = =cool_fan_speed - -cool_min_layer_time_fan_speed_max = 10 -infill_overlap_mm = =infill_line_width * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0 -material_bed_temperature = 60 -ooze_shield_dist = 2 -retraction_extra_prime_amount = 0 -retraction_speed = 25 -switch_extruder_retraction_speeds = 20 +[general] +version = 2 +name = Normal Quality +definition = ultimaker3 + +[metadata] +weight = 0 +type = quality +quality_type = normal +material = generic_pva_ultimaker3_BB_0.4 + +[values] +support_infill_rate = 30 +material_standby_temperature = 100 + diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg index ece408e998..c8d5b8aceb 100644 --- a/resources/variants/ultimaker3_aa04.inst.cfg +++ b/resources/variants/ultimaker3_aa04.inst.cfg @@ -8,4 +8,36 @@ author = ultimaker type = variant [values] -machine_nozzle_size = 0.4 +brim_width = 7 +machine_nozzle_cool_down_speed = 0.9 +raft_acceleration = =acceleration_print +raft_airgap = 0.3 +raft_base_speed = =0.75 * raft_speed +raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2 +raft_interface_line_spacing = =raft_interface_line_width + 0.2 +raft_interface_line_width = =line_width * 2 +raft_interface_speed = =raft_speed * 0.75 +raft_interface_thickness = =layer_height * 1.5 +raft_jerk = =jerk_print +raft_margin = 15 +raft_speed = =speed_print / 60 * 30 +raft_surface_layers = 2 +retraction_amount = 6.5 +retraction_count_max = 25 +retraction_min_travel = =line_width * 2 +retraction_prime_speed = =retraction_speed +skin_overlap = 15 +speed_print = 70 +speed_topbottom = =math.ceil(speed_print * 30 / 70) +speed_wall = =math.ceil(speed_print * 30 / 70) +support_angle = 60 +support_bottom_distance = =support_z_distance / 2 +support_pattern = zigzag +support_top_distance = =support_z_distance +support_use_towers = True +support_z_distance = =layer_height * 2 +switch_extruder_prime_speed = =switch_extruder_retraction_speeds +switch_extruder_retraction_amount = =machine_heat_zone_length +top_bottom_thickness = 1.2 +wall_thickness = 1.3 + diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index ebfce22ba4..80e6b309a4 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -8,4 +8,18 @@ author = ultimaker type = variant [values] -machine_nozzle_size = 0.4 +cool_fan_speed_max = =cool_fan_speed +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = 215 +retraction_extrusion_window = =retraction_amount +speed_wall_0 = =math.ceil(speed_wall * 25 / 30) +support_bottom_height = =layer_height * 2 +support_bottom_stair_step_height = =layer_height +support_infill_rate = 25 +support_interface_enable = True +support_join_distance = 3 +support_line_width = =round(line_width * 0.4 / 0.35, 2) +support_offset = 3 +support_xy_distance = =wall_line_width_0 * 3 +support_xy_distance_overhang = =wall_line_width_0 / 2 + diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg index ddf34fd6e0..24cbf04a26 100644 --- a/resources/variants/ultimaker3_extended_aa04.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg @@ -8,4 +8,35 @@ author = ultimaker type = variant [values] +brim_width = 7 +machine_nozzle_cool_down_speed = 0.9 machine_nozzle_size = 0.4 +raft_airgap = 0.3 +raft_base_speed = 15 +raft_base_thickness = 0.3 +raft_interface_line_spacing = 0.9 +raft_interface_line_width = 0.7 +raft_interface_speed = 15 +raft_interface_thickness = 0.15 +raft_margin = 15 +raft_speed = 20 +raft_surface_layers = 2 +retraction_amount = 6.5 +retraction_count_max = 25 +retraction_min_travel = 1.5 +retraction_prime_speed = 25 +skin_overlap = 15 +speed_print = 70 +speed_topbottom = =math.ceil(speed_print * 30 / 70) +speed_wall = =math.ceil(speed_print * 30 / 70) +support_angle = 60 +support_bottom_distance = =support_z_distance / 2 +support_infill_rate = 15 +support_join_distance = 2.0 +support_offset = 0.2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 +switch_extruder_prime_speed = 20 +switch_extruder_retraction_amount = 20 +top_bottom_thickness = 1.2 +wall_thickness = 1.3 diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index a6e0dfe5d2..a7c43ea376 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -8,4 +8,20 @@ author = ultimaker type = variant [values] +cool_fan_speed_max = 100 +machine_nozzle_heat_up_speed = 1.5 machine_nozzle_size = 0.4 +material_bed_temperature = 60 +material_print_temperature = 215 +raft_acceleration = =acceleration_layer_0 +raft_jerk = =jerk_layer_0 +retraction_extrusion_window = =retraction_amount +speed_wall_0 = =math.ceil(speed_wall * 25 / 30) +support_bottom_height = =layer_height * 2 +support_bottom_stair_step_height = =layer_height +support_interface_enable = True +support_line_width = =round(line_width * 0.4 / 0.35, 2) +support_pattern = triangles +support_use_towers = False +support_xy_distance = =wall_line_width_0 * 3 +support_xy_distance_overhang = =wall_line_width_0 / 2